mmc: replace printk with appropriate display macro
All the files using printk function for displaying kernel messages
in the mmc driver have been replaced with corresponding macro.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index d8705ad..b038c4a 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -251,7 +251,7 @@
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- printk(KERN_INFO "%s: Warning: Host did not "
+ pr_info("%s: Warning: Host did not "
"wait for busy state to end.\n",
mmc_hostname(test->card->host));
}
@@ -553,7 +553,7 @@
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
+ pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
"seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
mmc_hostname(test->card->host), sectors, sectors >> 1,
(sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
@@ -579,7 +579,7 @@
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
+ pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
"%lu.%09lu seconds (%u kB/s, %u KiB/s, "
"%u.%02u IOPS, sg_len %d)\n",
mmc_hostname(test->card->host), count, sectors, count,
@@ -1409,7 +1409,7 @@
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
- printk(KERN_INFO "%s: Highmem not configured - test skipped\n",
+ pr_info("%s: Highmem not configured - test skipped\n",
mmc_hostname(test->card->host));
return 0;
}
@@ -1436,7 +1436,7 @@
t->max_seg_sz, &t->sg_len, min_sg_len);
}
if (err)
- printk(KERN_INFO "%s: Failed to map sg list\n",
+ pr_info("%s: Failed to map sg list\n",
mmc_hostname(test->card->host));
return err;
}
@@ -2136,7 +2136,7 @@
return ret;
err:
- printk(KERN_INFO "[%s] error\n", __func__);
+ pr_info("[%s] error\n", __func__);
return ret;
}
@@ -2150,7 +2150,7 @@
if (rw->do_nonblock_req &&
((!pre_req && post_req) || (pre_req && !post_req))) {
- printk(KERN_INFO "error: only one of pre/post is defined\n");
+ pr_info("error: only one of pre/post is defined\n");
return -EINVAL;
}
@@ -2691,7 +2691,7 @@
{
int i, ret;
- printk(KERN_INFO "%s: Starting tests of card %s...\n",
+ pr_info("%s: Starting tests of card %s...\n",
mmc_hostname(test->card->host), mmc_card_id(test->card));
mmc_claim_host(test->card->host);
@@ -2702,14 +2702,14 @@
if (testcase && ((i + 1) != testcase))
continue;
- printk(KERN_INFO "%s: Test case %d. %s...\n",
+ pr_info("%s: Test case %d. %s...\n",
mmc_hostname(test->card->host), i + 1,
mmc_test_cases[i].name);
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- printk(KERN_INFO "%s: Result: Prepare "
+ pr_info("%s: Result: Prepare "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
@@ -2739,25 +2739,25 @@
ret = mmc_test_cases[i].run(test);
switch (ret) {
case RESULT_OK:
- printk(KERN_INFO "%s: Result: OK\n",
+ pr_info("%s: Result: OK\n",
mmc_hostname(test->card->host));
break;
case RESULT_FAIL:
- printk(KERN_INFO "%s: Result: FAILED\n",
+ pr_info("%s: Result: FAILED\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_HOST:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by host)\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_CARD:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by card)\n",
mmc_hostname(test->card->host));
break;
default:
- printk(KERN_INFO "%s: Result: ERROR (%d)\n",
+ pr_info("%s: Result: ERROR (%d)\n",
mmc_hostname(test->card->host), ret);
}
@@ -2768,7 +2768,7 @@
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- printk(KERN_INFO "%s: Warning: Cleanup "
+ pr_info("%s: Warning: Cleanup "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
@@ -2778,7 +2778,7 @@
mmc_release_host(test->card->host);
- printk(KERN_INFO "%s: Tests completed.\n",
+ pr_info("%s: Tests completed.\n",
mmc_hostname(test->card->host));
}