| /* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) | 
 |  * | 
 |  * A driver for Hermes or Prism 2 chipset based PCMCIA wireless | 
 |  * adaptors, with Lucent/Agere, Intersil or Symbol firmware. | 
 |  * | 
 |  * Current maintainers (as of 29 September 2003) are: | 
 |  * 	Pavel Roskin <proski AT gnu.org> | 
 |  * and	David Gibson <hermes AT gibson.dropbear.id.au> | 
 |  * | 
 |  * (C) Copyright David Gibson, IBM Corporation 2001-2003. | 
 |  * Copyright (C) 2000 David Gibson, Linuxcare Australia. | 
 |  *	With some help from : | 
 |  * Copyright (C) 2001 Jean Tourrilhes, HP Labs | 
 |  * Copyright (C) 2001 Benjamin Herrenschmidt | 
 |  * | 
 |  * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 | 
 |  * | 
 |  * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy | 
 |  * AT fasta.fh-dortmund.de> | 
 |  *      http://www.stud.fh-dortmund.de/~andy/wvlan/ | 
 |  * | 
 |  * The contents of this file are subject to the Mozilla Public License | 
 |  * Version 1.1 (the "License"); you may not use this file except in | 
 |  * compliance with the License. You may obtain a copy of the License | 
 |  * at http://www.mozilla.org/MPL/ | 
 |  * | 
 |  * Software distributed under the License is distributed on an "AS IS" | 
 |  * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See | 
 |  * the License for the specific language governing rights and | 
 |  * limitations under the License. | 
 |  * | 
 |  * The initial developer of the original code is David A. Hinds | 
 |  * <dahinds AT users.sourceforge.net>.  Portions created by David | 
 |  * A. Hinds are Copyright (C) 1999 David A. Hinds.  All Rights | 
 |  * Reserved. | 
 |  * | 
 |  * Alternatively, the contents of this file may be used under the | 
 |  * terms of the GNU General Public License version 2 (the "GPL"), in | 
 |  * which case the provisions of the GPL are applicable instead of the | 
 |  * above.  If you wish to allow the use of your version of this file | 
 |  * only under the terms of the GPL and not to allow others to use your | 
 |  * version of this file under the MPL, indicate your decision by | 
 |  * deleting the provisions above and replace them with the notice and | 
 |  * other provisions required by the GPL.  If you do not delete the | 
 |  * provisions above, a recipient may use your version of this file | 
 |  * under either the MPL or the GPL.  */ | 
 |  | 
 | /* | 
 |  * TODO | 
 |  *	o Handle de-encapsulation within network layer, provide 802.11 | 
 |  *	  headers (patch from Thomas 'Dent' Mirlacher) | 
 |  *	o Fix possible races in SPY handling. | 
 |  *	o Disconnect wireless extensions from fundamental configuration. | 
 |  *	o (maybe) Software WEP support (patch from Stano Meduna). | 
 |  *	o (maybe) Use multiple Tx buffers - driver handling queue | 
 |  *	  rather than firmware. | 
 |  */ | 
 |  | 
 | /* Locking and synchronization: | 
 |  * | 
 |  * The basic principle is that everything is serialized through a | 
 |  * single spinlock, priv->lock.  The lock is used in user, bh and irq | 
 |  * context, so when taken outside hardirq context it should always be | 
 |  * taken with interrupts disabled.  The lock protects both the | 
 |  * hardware and the struct orinoco_private. | 
 |  * | 
 |  * Another flag, priv->hw_unavailable indicates that the hardware is | 
 |  * unavailable for an extended period of time (e.g. suspended, or in | 
 |  * the middle of a hard reset).  This flag is protected by the | 
 |  * spinlock.  All code which touches the hardware should check the | 
 |  * flag after taking the lock, and if it is set, give up on whatever | 
 |  * they are doing and drop the lock again.  The orinoco_lock() | 
 |  * function handles this (it unlocks and returns -EBUSY if | 
 |  * hw_unavailable is non-zero). | 
 |  */ | 
 |  | 
 | #define DRIVER_NAME "orinoco" | 
 |  | 
 | #include <linux/config.h> | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/wireless.h> | 
 | #include <net/iw_handler.h> | 
 | #include <net/ieee80211.h> | 
 |  | 
 | #include "hermes_rid.h" | 
 | #include "orinoco.h" | 
 |  | 
 | /********************************************************************/ | 
 | /* Module information                                               */ | 
 | /********************************************************************/ | 
 |  | 
 | MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); | 
 | MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); | 
 | MODULE_LICENSE("Dual MPL/GPL"); | 
 |  | 
 | /* Level of debugging. Used in the macros in orinoco.h */ | 
 | #ifdef ORINOCO_DEBUG | 
 | int orinoco_debug = ORINOCO_DEBUG; | 
 | module_param(orinoco_debug, int, 0644); | 
 | MODULE_PARM_DESC(orinoco_debug, "Debug level"); | 
 | EXPORT_SYMBOL(orinoco_debug); | 
 | #endif | 
 |  | 
 | static int suppress_linkstatus; /* = 0 */ | 
 | module_param(suppress_linkstatus, bool, 0644); | 
 | MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); | 
 | static int ignore_disconnect; /* = 0 */ | 
 | module_param(ignore_disconnect, int, 0644); | 
 | MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); | 
 |  | 
 | static int force_monitor; /* = 0 */ | 
 | module_param(force_monitor, int, 0644); | 
 | MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); | 
 |  | 
 | /********************************************************************/ | 
 | /* Compile time configuration and compatibility stuff               */ | 
 | /********************************************************************/ | 
 |  | 
 | /* We do this this way to avoid ifdefs in the actual code */ | 
 | #ifdef WIRELESS_SPY | 
 | #define SPY_NUMBER(priv)	(priv->spy_data.spy_number) | 
 | #else | 
 | #define SPY_NUMBER(priv)	0 | 
 | #endif /* WIRELESS_SPY */ | 
 |  | 
 | /********************************************************************/ | 
 | /* Internal constants                                               */ | 
 | /********************************************************************/ | 
 |  | 
 | /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ | 
 | static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; | 
 | #define ENCAPS_OVERHEAD		(sizeof(encaps_hdr) + 2) | 
 |  | 
 | #define ORINOCO_MIN_MTU		256 | 
 | #define ORINOCO_MAX_MTU		(IEEE80211_DATA_LEN - ENCAPS_OVERHEAD) | 
 |  | 
 | #define SYMBOL_MAX_VER_LEN	(14) | 
 | #define USER_BAP		0 | 
 | #define IRQ_BAP			1 | 
 | #define MAX_IRQLOOPS_PER_IRQ	10 | 
 | #define MAX_IRQLOOPS_PER_JIFFY	(20000/HZ) /* Based on a guestimate of | 
 | 					    * how many events the | 
 | 					    * device could | 
 | 					    * legitimately generate */ | 
 | #define SMALL_KEY_SIZE		5 | 
 | #define LARGE_KEY_SIZE		13 | 
 | #define TX_NICBUF_SIZE_BUG	1585		/* Bug in Symbol firmware */ | 
 |  | 
 | #define DUMMY_FID		0xFFFF | 
 |  | 
 | /*#define MAX_MULTICAST(priv)	(priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ | 
 |   HERMES_MAX_MULTICAST : 0)*/ | 
 | #define MAX_MULTICAST(priv)	(HERMES_MAX_MULTICAST) | 
 |  | 
 | #define ORINOCO_INTEN	 	(HERMES_EV_RX | HERMES_EV_ALLOC \ | 
 | 				 | HERMES_EV_TX | HERMES_EV_TXEXC \ | 
 | 				 | HERMES_EV_WTERR | HERMES_EV_INFO \ | 
 | 				 | HERMES_EV_INFDROP ) | 
 |  | 
 | #define MAX_RID_LEN 1024 | 
 |  | 
 | static const struct iw_handler_def orinoco_handler_def; | 
 | static struct ethtool_ops orinoco_ethtool_ops; | 
 |  | 
 | /********************************************************************/ | 
 | /* Data tables                                                      */ | 
 | /********************************************************************/ | 
 |  | 
 | /* The frequency of each channel in MHz */ | 
 | static const long channel_frequency[] = { | 
 | 	2412, 2417, 2422, 2427, 2432, 2437, 2442, | 
 | 	2447, 2452, 2457, 2462, 2467, 2472, 2484 | 
 | }; | 
 | #define NUM_CHANNELS ARRAY_SIZE(channel_frequency) | 
 |  | 
 | /* This tables gives the actual meanings of the bitrate IDs returned | 
 |  * by the firmware. */ | 
 | static struct { | 
 | 	int bitrate; /* in 100s of kilobits */ | 
 | 	int automatic; | 
 | 	u16 agere_txratectrl; | 
 | 	u16 intersil_txratectrl; | 
 | } bitrate_table[] = { | 
 | 	{110, 1,  3, 15}, /* Entry 0 is the default */ | 
 | 	{10,  0,  1,  1}, | 
 | 	{10,  1,  1,  1}, | 
 | 	{20,  0,  2,  2}, | 
 | 	{20,  1,  6,  3}, | 
 | 	{55,  0,  4,  4}, | 
 | 	{55,  1,  7,  7}, | 
 | 	{110, 0,  5,  8}, | 
 | }; | 
 | #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) | 
 |  | 
 | /********************************************************************/ | 
 | /* Data types                                                       */ | 
 | /********************************************************************/ | 
 |  | 
 | /* Beginning of the Tx descriptor, used in TxExc handling */ | 
 | struct hermes_txexc_data { | 
 | 	struct hermes_tx_descriptor desc; | 
 | 	__le16 frame_ctl; | 
 | 	__le16 duration_id; | 
 | 	u8 addr1[ETH_ALEN]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | /* Rx frame header except compatibility 802.3 header */ | 
 | struct hermes_rx_descriptor { | 
 | 	/* Control */ | 
 | 	__le16 status; | 
 | 	__le32 time; | 
 | 	u8 silence; | 
 | 	u8 signal; | 
 | 	u8 rate; | 
 | 	u8 rxflow; | 
 | 	__le32 reserved; | 
 |  | 
 | 	/* 802.11 header */ | 
 | 	__le16 frame_ctl; | 
 | 	__le16 duration_id; | 
 | 	u8 addr1[ETH_ALEN]; | 
 | 	u8 addr2[ETH_ALEN]; | 
 | 	u8 addr3[ETH_ALEN]; | 
 | 	__le16 seq_ctl; | 
 | 	u8 addr4[ETH_ALEN]; | 
 |  | 
 | 	/* Data length */ | 
 | 	__le16 data_len; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | /********************************************************************/ | 
 | /* Function prototypes                                              */ | 
 | /********************************************************************/ | 
 |  | 
 | static int __orinoco_program_rids(struct net_device *dev); | 
 | static void __orinoco_set_multicast_list(struct net_device *dev); | 
 |  | 
 | /********************************************************************/ | 
 | /* Internal helper functions                                        */ | 
 | /********************************************************************/ | 
 |  | 
 | static inline void set_port_type(struct orinoco_private *priv) | 
 | { | 
 | 	switch (priv->iw_mode) { | 
 | 	case IW_MODE_INFRA: | 
 | 		priv->port_type = 1; | 
 | 		priv->createibss = 0; | 
 | 		break; | 
 | 	case IW_MODE_ADHOC: | 
 | 		if (priv->prefer_port3) { | 
 | 			priv->port_type = 3; | 
 | 			priv->createibss = 0; | 
 | 		} else { | 
 | 			priv->port_type = priv->ibss_port; | 
 | 			priv->createibss = 1; | 
 | 		} | 
 | 		break; | 
 | 	case IW_MODE_MONITOR: | 
 | 		priv->port_type = 3; | 
 | 		priv->createibss = 0; | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", | 
 | 		       priv->ndev->name); | 
 | 	} | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Device methods                                                   */ | 
 | /********************************************************************/ | 
 |  | 
 | static int orinoco_open(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 | 	int err; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	err = __orinoco_up(dev); | 
 |  | 
 | 	if (! err) | 
 | 		priv->open = 1; | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_stop(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = 0; | 
 |  | 
 | 	/* We mustn't use orinoco_lock() here, because we need to be | 
 | 	   able to close the interface even if hw_unavailable is set | 
 | 	   (e.g. as we're released after a PC Card removal) */ | 
 | 	spin_lock_irq(&priv->lock); | 
 |  | 
 | 	priv->open = 0; | 
 |  | 
 | 	err = __orinoco_down(dev); | 
 |  | 
 | 	spin_unlock_irq(&priv->lock); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static struct net_device_stats *orinoco_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	 | 
 | 	return &priv->stats; | 
 | } | 
 |  | 
 | static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	struct iw_statistics *wstats = &priv->wstats; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (! netif_device_present(dev)) { | 
 | 		printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", | 
 | 		       dev->name); | 
 | 		return NULL; /* FIXME: Can we do better than this? */ | 
 | 	} | 
 |  | 
 | 	/* If busy, return the old stats.  Returning NULL may cause | 
 | 	 * the interface to disappear from /proc/net/wireless */ | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return wstats; | 
 |  | 
 | 	/* We can't really wait for the tallies inquiry command to | 
 | 	 * complete, so we just use the previous results and trigger | 
 | 	 * a new tallies inquiry command for next time - Jean II */ | 
 | 	/* FIXME: Really we should wait for the inquiry to come back - | 
 | 	 * as it is the stats we give don't make a whole lot of sense. | 
 | 	 * Unfortunately, it's not clear how to do that within the | 
 | 	 * wireless extensions framework: I think we're in user | 
 | 	 * context, but a lock seems to be held by the time we get in | 
 | 	 * here so we're not safe to sleep here. */ | 
 | 	hermes_inquire(hw, HERMES_INQ_TALLIES); | 
 |  | 
 | 	if (priv->iw_mode == IW_MODE_ADHOC) { | 
 | 		memset(&wstats->qual, 0, sizeof(wstats->qual)); | 
 | 		/* If a spy address is defined, we report stats of the | 
 | 		 * first spy address - Jean II */ | 
 | 		if (SPY_NUMBER(priv)) { | 
 | 			wstats->qual.qual = priv->spy_data.spy_stat[0].qual; | 
 | 			wstats->qual.level = priv->spy_data.spy_stat[0].level; | 
 | 			wstats->qual.noise = priv->spy_data.spy_stat[0].noise; | 
 | 			wstats->qual.updated = priv->spy_data.spy_stat[0].updated; | 
 | 		} | 
 | 	} else { | 
 | 		struct { | 
 | 			__le16 qual, signal, noise, unused; | 
 | 		} __attribute__ ((packed)) cq; | 
 |  | 
 | 		err = HERMES_READ_RECORD(hw, USER_BAP, | 
 | 					 HERMES_RID_COMMSQUALITY, &cq); | 
 |  | 
 | 		if (!err) { | 
 | 			wstats->qual.qual = (int)le16_to_cpu(cq.qual); | 
 | 			wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; | 
 | 			wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; | 
 | 			wstats->qual.updated = 7; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return wstats; | 
 | } | 
 |  | 
 | static void orinoco_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) { | 
 | 		printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " | 
 | 		       "called when hw_unavailable\n", dev->name); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	__orinoco_set_multicast_list(dev); | 
 | 	orinoco_unlock(priv, &flags); | 
 | } | 
 |  | 
 | static int orinoco_change_mtu(struct net_device *dev, int new_mtu) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) > | 
 | 	     (priv->nicbuf_size - ETH_HLEN) ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	dev->mtu = new_mtu; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Tx path                                                          */ | 
 | /********************************************************************/ | 
 |  | 
 | static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	u16 txfid = priv->txfid; | 
 | 	struct ethhdr *eh; | 
 | 	int data_off; | 
 | 	struct hermes_tx_descriptor desc; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (! netif_running(dev)) { | 
 | 		printk(KERN_ERR "%s: Tx on stopped device!\n", | 
 | 		       dev->name); | 
 | 		return NETDEV_TX_BUSY; | 
 | 	} | 
 | 	 | 
 | 	if (netif_queue_stopped(dev)) { | 
 | 		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",  | 
 | 		       dev->name); | 
 | 		return NETDEV_TX_BUSY; | 
 | 	} | 
 | 	 | 
 | 	if (orinoco_lock(priv, &flags) != 0) { | 
 | 		printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", | 
 | 		       dev->name); | 
 | 		return NETDEV_TX_BUSY; | 
 | 	} | 
 |  | 
 | 	if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { | 
 | 		/* Oops, the firmware hasn't established a connection, | 
 |                    silently drop the packet (this seems to be the | 
 |                    safest approach). */ | 
 | 		goto drop; | 
 | 	} | 
 |  | 
 | 	/* Check packet length */ | 
 | 	if (skb->len < ETH_HLEN) | 
 | 		goto drop; | 
 |  | 
 | 	eh = (struct ethhdr *)skb->data; | 
 |  | 
 | 	memset(&desc, 0, sizeof(desc)); | 
 |  	desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); | 
 | 	err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); | 
 | 	if (err) { | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_ERR "%s: Error %d writing Tx descriptor " | 
 | 			       "to BAP\n", dev->name, err); | 
 | 		goto busy; | 
 | 	} | 
 |  | 
 | 	/* Clear the 802.11 header and data length fields - some | 
 | 	 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused | 
 | 	 * if this isn't done. */ | 
 | 	hermes_clear_words(hw, HERMES_DATA0, | 
 | 			   HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); | 
 |  | 
 | 	/* Encapsulate Ethernet-II frames */ | 
 | 	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ | 
 | 		struct header_struct { | 
 | 			struct ethhdr eth;	/* 802.3 header */ | 
 | 			u8 encap[6];		/* 802.2 header */ | 
 | 		} __attribute__ ((packed)) hdr; | 
 |  | 
 | 		/* Strip destination and source from the data */ | 
 | 		skb_pull(skb, 2 * ETH_ALEN); | 
 | 		data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr); | 
 |  | 
 | 		/* And move them to a separate header */ | 
 | 		memcpy(&hdr.eth, eh, 2 * ETH_ALEN); | 
 | 		hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); | 
 | 		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); | 
 |  | 
 | 		err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), | 
 | 					txfid, HERMES_802_3_OFFSET); | 
 | 		if (err) { | 
 | 			if (net_ratelimit()) | 
 | 				printk(KERN_ERR "%s: Error %d writing packet " | 
 | 				       "header to BAP\n", dev->name, err); | 
 | 			goto busy; | 
 | 		} | 
 | 	} else { /* IEEE 802.3 frame */ | 
 | 		data_off = HERMES_802_3_OFFSET; | 
 | 	} | 
 |  | 
 | 	err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, | 
 | 				txfid, data_off); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d writing packet to BAP\n", | 
 | 		       dev->name, err); | 
 | 		goto busy; | 
 | 	} | 
 |  | 
 | 	/* Finally, we actually initiate the send */ | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, | 
 | 				txfid, NULL); | 
 | 	if (err) { | 
 | 		netif_start_queue(dev); | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_ERR "%s: Error %d transmitting packet\n", | 
 | 				dev->name, err); | 
 | 		goto busy; | 
 | 	} | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 | 	stats->tx_bytes += data_off + skb->len; | 
 | 	goto ok; | 
 |  | 
 |  drop: | 
 | 	stats->tx_errors++; | 
 | 	stats->tx_dropped++; | 
 |  | 
 |  ok: | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	dev_kfree_skb(skb); | 
 | 	return NETDEV_TX_OK; | 
 |  | 
 |  busy: | 
 | 	if (err == -EIO) | 
 | 		schedule_work(&priv->reset_work); | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return NETDEV_TX_BUSY; | 
 | } | 
 |  | 
 | static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	u16 fid = hermes_read_regn(hw, ALLOCFID); | 
 |  | 
 | 	if (fid != priv->txfid) { | 
 | 		if (fid != DUMMY_FID) | 
 | 			printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", | 
 | 			       dev->name, fid); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	hermes_write_regn(hw, ALLOCFID, DUMMY_FID); | 
 | } | 
 |  | 
 | static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 |  | 
 | 	stats->tx_packets++; | 
 |  | 
 | 	netif_wake_queue(dev); | 
 |  | 
 | 	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); | 
 | } | 
 |  | 
 | static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 | 	u16 fid = hermes_read_regn(hw, TXCOMPLFID); | 
 | 	u16 status; | 
 | 	struct hermes_txexc_data hdr; | 
 | 	int err = 0; | 
 |  | 
 | 	if (fid == DUMMY_FID) | 
 | 		return; /* Nothing's really happened */ | 
 |  | 
 | 	/* Read part of the frame header - we need status and addr1 */ | 
 | 	err = hermes_bap_pread(hw, IRQ_BAP, &hdr, | 
 | 			       sizeof(struct hermes_txexc_data), | 
 | 			       fid, 0); | 
 |  | 
 | 	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); | 
 | 	stats->tx_errors++; | 
 |  | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " | 
 | 		       "(FID=%04X error %d)\n", | 
 | 		       dev->name, fid, err); | 
 | 		return; | 
 | 	} | 
 | 	 | 
 | 	DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, | 
 | 	      err, fid); | 
 |      | 
 | 	/* We produce a TXDROP event only for retry or lifetime | 
 | 	 * exceeded, because that's the only status that really mean | 
 | 	 * that this particular node went away. | 
 | 	 * Other errors means that *we* screwed up. - Jean II */ | 
 | 	status = le16_to_cpu(hdr.desc.status); | 
 | 	if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { | 
 | 		union iwreq_data	wrqu; | 
 |  | 
 | 		/* Copy 802.11 dest address. | 
 | 		 * We use the 802.11 header because the frame may | 
 | 		 * not be 802.3 or may be mangled... | 
 | 		 * In Ad-Hoc mode, it will be the node address. | 
 | 		 * In managed mode, it will be most likely the AP addr | 
 | 		 * User space will figure out how to convert it to | 
 | 		 * whatever it needs (IP address or else). | 
 | 		 * - Jean II */ | 
 | 		memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); | 
 | 		wrqu.addr.sa_family = ARPHRD_ETHER; | 
 |  | 
 | 		/* Send event to user space */ | 
 | 		wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); | 
 | 	} | 
 |  | 
 | 	netif_wake_queue(dev); | 
 | } | 
 |  | 
 | static void orinoco_tx_timeout(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 | 	struct hermes *hw = &priv->hw; | 
 |  | 
 | 	printk(KERN_WARNING "%s: Tx timeout! " | 
 | 	       "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", | 
 | 	       dev->name, hermes_read_regn(hw, ALLOCFID), | 
 | 	       hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); | 
 |  | 
 | 	stats->tx_errors++; | 
 |  | 
 | 	schedule_work(&priv->reset_work); | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Rx path (data frames)                                            */ | 
 | /********************************************************************/ | 
 |  | 
 | /* Does the frame have a SNAP header indicating it should be | 
 |  * de-encapsulated to Ethernet-II? */ | 
 | static inline int is_ethersnap(void *_hdr) | 
 | { | 
 | 	u8 *hdr = _hdr; | 
 |  | 
 | 	/* We de-encapsulate all packets which, a) have SNAP headers | 
 | 	 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header | 
 | 	 * and where b) the OUI of the SNAP header is 00:00:00 or | 
 | 	 * 00:00:f8 - we need both because different APs appear to use | 
 | 	 * different OUIs for some reason */ | 
 | 	return (memcmp(hdr, &encaps_hdr, 5) == 0) | 
 | 		&& ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); | 
 | } | 
 |  | 
 | static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, | 
 | 				      int level, int noise) | 
 | { | 
 | 	struct iw_quality wstats; | 
 | 	wstats.level = level - 0x95; | 
 | 	wstats.noise = noise - 0x95; | 
 | 	wstats.qual = (level > noise) ? (level - noise) : 0; | 
 | 	wstats.updated = 7; | 
 | 	/* Update spy records */ | 
 | 	wireless_spy_update(dev, mac, &wstats); | 
 | } | 
 |  | 
 | static void orinoco_stat_gather(struct net_device *dev, | 
 | 				struct sk_buff *skb, | 
 | 				struct hermes_rx_descriptor *desc) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	/* Using spy support with lots of Rx packets, like in an | 
 | 	 * infrastructure (AP), will really slow down everything, because | 
 | 	 * the MAC address must be compared to each entry of the spy list. | 
 | 	 * If the user really asks for it (set some address in the | 
 | 	 * spy list), we do it, but he will pay the price. | 
 | 	 * Note that to get here, you need both WIRELESS_SPY | 
 | 	 * compiled in AND some addresses in the list !!! | 
 | 	 */ | 
 | 	/* Note : gcc will optimise the whole section away if | 
 | 	 * WIRELESS_SPY is not defined... - Jean II */ | 
 | 	if (SPY_NUMBER(priv)) { | 
 | 		orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN, | 
 | 				   desc->signal, desc->silence); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * orinoco_rx_monitor - handle received monitor frames. | 
 |  * | 
 |  * Arguments: | 
 |  *	dev		network device | 
 |  *	rxfid		received FID | 
 |  *	desc		rx descriptor of the frame | 
 |  * | 
 |  * Call context: interrupt | 
 |  */ | 
 | static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, | 
 | 			       struct hermes_rx_descriptor *desc) | 
 | { | 
 | 	u32 hdrlen = 30;	/* return full header by default */ | 
 | 	u32 datalen = 0; | 
 | 	u16 fc; | 
 | 	int err; | 
 | 	int len; | 
 | 	struct sk_buff *skb; | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 | 	hermes_t *hw = &priv->hw; | 
 |  | 
 | 	len = le16_to_cpu(desc->data_len); | 
 |  | 
 | 	/* Determine the size of the header and the data */ | 
 | 	fc = le16_to_cpu(desc->frame_ctl); | 
 | 	switch (fc & IEEE80211_FCTL_FTYPE) { | 
 | 	case IEEE80211_FTYPE_DATA: | 
 | 		if ((fc & IEEE80211_FCTL_TODS) | 
 | 		    && (fc & IEEE80211_FCTL_FROMDS)) | 
 | 			hdrlen = 30; | 
 | 		else | 
 | 			hdrlen = 24; | 
 | 		datalen = len; | 
 | 		break; | 
 | 	case IEEE80211_FTYPE_MGMT: | 
 | 		hdrlen = 24; | 
 | 		datalen = len; | 
 | 		break; | 
 | 	case IEEE80211_FTYPE_CTL: | 
 | 		switch (fc & IEEE80211_FCTL_STYPE) { | 
 | 		case IEEE80211_STYPE_PSPOLL: | 
 | 		case IEEE80211_STYPE_RTS: | 
 | 		case IEEE80211_STYPE_CFEND: | 
 | 		case IEEE80211_STYPE_CFENDACK: | 
 | 			hdrlen = 16; | 
 | 			break; | 
 | 		case IEEE80211_STYPE_CTS: | 
 | 		case IEEE80211_STYPE_ACK: | 
 | 			hdrlen = 10; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		/* Unknown frame type */ | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* sanity check the length */ | 
 | 	if (datalen > IEEE80211_DATA_LEN + 12) { | 
 | 		printk(KERN_DEBUG "%s: oversized monitor frame, " | 
 | 		       "data length = %d\n", dev->name, datalen); | 
 | 		stats->rx_length_errors++; | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(hdrlen + datalen); | 
 | 	if (!skb) { | 
 | 		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", | 
 | 		       dev->name); | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	/* Copy the 802.11 header to the skb */ | 
 | 	memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); | 
 | 	skb->mac.raw = skb->data; | 
 |  | 
 | 	/* If any, copy the data from the card to the skb */ | 
 | 	if (datalen > 0) { | 
 | 		err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), | 
 | 				       ALIGN(datalen, 2), rxfid, | 
 | 				       HERMES_802_2_OFFSET); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: error %d reading monitor frame\n", | 
 | 			       dev->name, err); | 
 | 			goto drop; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	skb->dev = dev; | 
 | 	skb->ip_summed = CHECKSUM_NONE; | 
 | 	skb->pkt_type = PACKET_OTHERHOST; | 
 | 	skb->protocol = __constant_htons(ETH_P_802_2); | 
 | 	 | 
 | 	dev->last_rx = jiffies; | 
 | 	stats->rx_packets++; | 
 | 	stats->rx_bytes += skb->len; | 
 |  | 
 | 	netif_rx(skb); | 
 | 	return; | 
 |  | 
 |  drop: | 
 | 	dev_kfree_skb_irq(skb); | 
 |  update_stats: | 
 | 	stats->rx_errors++; | 
 | 	stats->rx_dropped++; | 
 | } | 
 |  | 
 | static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct net_device_stats *stats = &priv->stats; | 
 | 	struct iw_statistics *wstats = &priv->wstats; | 
 | 	struct sk_buff *skb = NULL; | 
 | 	u16 rxfid, status, fc; | 
 | 	int length; | 
 | 	struct hermes_rx_descriptor desc; | 
 | 	struct ethhdr *hdr; | 
 | 	int err; | 
 |  | 
 | 	rxfid = hermes_read_regn(hw, RXFID); | 
 |  | 
 | 	err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), | 
 | 			       rxfid, 0); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: error %d reading Rx descriptor. " | 
 | 		       "Frame dropped.\n", dev->name, err); | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	status = le16_to_cpu(desc.status); | 
 |  | 
 | 	if (status & HERMES_RXSTAT_BADCRC) { | 
 | 		DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", | 
 | 		      dev->name); | 
 | 		stats->rx_crc_errors++; | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	/* Handle frames in monitor mode */ | 
 | 	if (priv->iw_mode == IW_MODE_MONITOR) { | 
 | 		orinoco_rx_monitor(dev, rxfid, &desc); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (status & HERMES_RXSTAT_UNDECRYPTABLE) { | 
 | 		DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", | 
 | 		      dev->name); | 
 | 		wstats->discard.code++; | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	length = le16_to_cpu(desc.data_len); | 
 | 	fc = le16_to_cpu(desc.frame_ctl); | 
 |  | 
 | 	/* Sanity checks */ | 
 | 	if (length < 3) { /* No for even an 802.2 LLC header */ | 
 | 		/* At least on Symbol firmware with PCF we get quite a | 
 |                    lot of these legitimately - Poll frames with no | 
 |                    data. */ | 
 | 		return; | 
 | 	} | 
 | 	if (length > IEEE80211_DATA_LEN) { | 
 | 		printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", | 
 | 		       dev->name, length); | 
 | 		stats->rx_length_errors++; | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	/* We need space for the packet data itself, plus an ethernet | 
 | 	   header, plus 2 bytes so we can align the IP header on a | 
 | 	   32bit boundary, plus 1 byte so we can read in odd length | 
 | 	   packets from the card, which has an IO granularity of 16 | 
 | 	   bits */   | 
 | 	skb = dev_alloc_skb(length+ETH_HLEN+2+1); | 
 | 	if (!skb) { | 
 | 		printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", | 
 | 		       dev->name); | 
 | 		goto update_stats; | 
 | 	} | 
 |  | 
 | 	/* We'll prepend the header, so reserve space for it.  The worst | 
 | 	   case is no decapsulation, when 802.3 header is prepended and | 
 | 	   nothing is removed.  2 is for aligning the IP header.  */ | 
 | 	skb_reserve(skb, ETH_HLEN + 2); | 
 |  | 
 | 	err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), | 
 | 			       ALIGN(length, 2), rxfid, | 
 | 			       HERMES_802_2_OFFSET); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: error %d reading frame. " | 
 | 		       "Frame dropped.\n", dev->name, err); | 
 | 		goto drop; | 
 | 	} | 
 |  | 
 | 	/* Handle decapsulation | 
 | 	 * In most cases, the firmware tell us about SNAP frames. | 
 | 	 * For some reason, the SNAP frames sent by LinkSys APs | 
 | 	 * are not properly recognised by most firmwares. | 
 | 	 * So, check ourselves */ | 
 | 	if (length >= ENCAPS_OVERHEAD && | 
 | 	    (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || | 
 | 	     ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || | 
 | 	     is_ethersnap(skb->data))) { | 
 | 		/* These indicate a SNAP within 802.2 LLC within | 
 | 		   802.11 frame which we'll need to de-encapsulate to | 
 | 		   the original EthernetII frame. */ | 
 | 		hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); | 
 | 	} else { | 
 | 		/* 802.3 frame - prepend 802.3 header as is */ | 
 | 		hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); | 
 | 		hdr->h_proto = htons(length); | 
 | 	} | 
 | 	memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); | 
 | 	if (fc & IEEE80211_FCTL_FROMDS) | 
 | 		memcpy(hdr->h_source, desc.addr3, ETH_ALEN); | 
 | 	else | 
 | 		memcpy(hdr->h_source, desc.addr2, ETH_ALEN); | 
 |  | 
 | 	dev->last_rx = jiffies; | 
 | 	skb->dev = dev; | 
 | 	skb->protocol = eth_type_trans(skb, dev); | 
 | 	skb->ip_summed = CHECKSUM_NONE; | 
 | 	if (fc & IEEE80211_FCTL_TODS) | 
 | 		skb->pkt_type = PACKET_OTHERHOST; | 
 | 	 | 
 | 	/* Process the wireless stats if needed */ | 
 | 	orinoco_stat_gather(dev, skb, &desc); | 
 |  | 
 | 	/* Pass the packet to the networking stack */ | 
 | 	netif_rx(skb); | 
 | 	stats->rx_packets++; | 
 | 	stats->rx_bytes += length; | 
 |  | 
 | 	return; | 
 |  | 
 |  drop:	 | 
 | 	dev_kfree_skb_irq(skb); | 
 |  update_stats: | 
 | 	stats->rx_errors++; | 
 | 	stats->rx_dropped++; | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Rx path (info frames)                                            */ | 
 | /********************************************************************/ | 
 |  | 
 | static void print_linkstatus(struct net_device *dev, u16 status) | 
 | { | 
 | 	char * s; | 
 |  | 
 | 	if (suppress_linkstatus) | 
 | 		return; | 
 |  | 
 | 	switch (status) { | 
 | 	case HERMES_LINKSTATUS_NOT_CONNECTED: | 
 | 		s = "Not Connected"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_CONNECTED: | 
 | 		s = "Connected"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_DISCONNECTED: | 
 | 		s = "Disconnected"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_AP_CHANGE: | 
 | 		s = "AP Changed"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: | 
 | 		s = "AP Out of Range"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_AP_IN_RANGE: | 
 | 		s = "AP In Range"; | 
 | 		break; | 
 | 	case HERMES_LINKSTATUS_ASSOC_FAILED: | 
 | 		s = "Association Failed"; | 
 | 		break; | 
 | 	default: | 
 | 		s = "UNKNOWN"; | 
 | 	} | 
 | 	 | 
 | 	printk(KERN_INFO "%s: New link status: %s (%04x)\n", | 
 | 	       dev->name, s, status); | 
 | } | 
 |  | 
 | /* Search scan results for requested BSSID, join it if found */ | 
 | static void orinoco_join_ap(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 | 	struct join_req { | 
 | 		u8 bssid[ETH_ALEN]; | 
 | 		__le16 channel; | 
 | 	} __attribute__ ((packed)) req; | 
 | 	const int atom_len = offsetof(struct prism2_scan_apinfo, atim); | 
 | 	struct prism2_scan_apinfo *atom = NULL; | 
 | 	int offset = 4; | 
 | 	int found = 0; | 
 | 	u8 *buf; | 
 | 	u16 len; | 
 |  | 
 | 	/* Allocate buffer for scan results */ | 
 | 	buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); | 
 | 	if (! buf) | 
 | 		return; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		goto fail_lock; | 
 |  | 
 | 	/* Sanity checks in case user changed something in the meantime */ | 
 | 	if (! priv->bssid_fixed) | 
 | 		goto out; | 
 |  | 
 | 	if (strlen(priv->desired_essid) == 0) | 
 | 		goto out; | 
 |  | 
 | 	/* Read scan results from the firmware */ | 
 | 	err = hermes_read_ltv(hw, USER_BAP, | 
 | 			      HERMES_RID_SCANRESULTSTABLE, | 
 | 			      MAX_SCAN_LEN, &len, buf); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Cannot read scan results\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	len = HERMES_RECLEN_TO_BYTES(len); | 
 |  | 
 | 	/* Go through the scan results looking for the channel of the AP | 
 | 	 * we were requested to join */ | 
 | 	for (; offset + atom_len <= len; offset += atom_len) { | 
 | 		atom = (struct prism2_scan_apinfo *) (buf + offset); | 
 | 		if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { | 
 | 			found = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (! found) { | 
 | 		DEBUG(1, "%s: Requested AP not found in scan results\n", | 
 | 		      dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); | 
 | 	req.channel = atom->channel;	/* both are little-endian */ | 
 | 	err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, | 
 | 				  &req); | 
 | 	if (err) | 
 | 		printk(KERN_ERR "%s: Error issuing join request\n", dev->name); | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 |  fail_lock: | 
 | 	kfree(buf); | 
 | } | 
 |  | 
 | /* Send new BSSID to userspace */ | 
 | static void orinoco_send_wevents(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	union iwreq_data wrqu; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return; | 
 |  | 
 | 	err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, | 
 | 			      ETH_ALEN, NULL, wrqu.ap_addr.sa_data); | 
 | 	if (err != 0) | 
 | 		goto out; | 
 |  | 
 | 	wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
 |  | 
 | 	/* Send event to user space */ | 
 | 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 | } | 
 |  | 
 | static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	u16 infofid; | 
 | 	struct { | 
 | 		__le16 len; | 
 | 		__le16 type; | 
 | 	} __attribute__ ((packed)) info; | 
 | 	int len, type; | 
 | 	int err; | 
 |  | 
 | 	/* This is an answer to an INQUIRE command that we did earlier, | 
 | 	 * or an information "event" generated by the card | 
 | 	 * The controller return to us a pseudo frame containing | 
 | 	 * the information in question - Jean II */ | 
 | 	infofid = hermes_read_regn(hw, INFOFID); | 
 |  | 
 | 	/* Read the info frame header - don't try too hard */ | 
 | 	err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), | 
 | 			       infofid, 0); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: error %d reading info frame. " | 
 | 		       "Frame dropped.\n", dev->name, err); | 
 | 		return; | 
 | 	} | 
 | 	 | 
 | 	len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); | 
 | 	type = le16_to_cpu(info.type); | 
 |  | 
 | 	switch (type) { | 
 | 	case HERMES_INQ_TALLIES: { | 
 | 		struct hermes_tallies_frame tallies; | 
 | 		struct iw_statistics *wstats = &priv->wstats; | 
 | 		 | 
 | 		if (len > sizeof(tallies)) { | 
 | 			printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", | 
 | 			       dev->name, len); | 
 | 			len = sizeof(tallies); | 
 | 		} | 
 | 		 | 
 | 		err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, | 
 | 				       infofid, sizeof(info)); | 
 | 		if (err) | 
 | 			break; | 
 | 		 | 
 | 		/* Increment our various counters */ | 
 | 		/* wstats->discard.nwid - no wrong BSSID stuff */ | 
 | 		wstats->discard.code += | 
 | 			le16_to_cpu(tallies.RxWEPUndecryptable); | 
 | 		if (len == sizeof(tallies))   | 
 | 			wstats->discard.code += | 
 | 				le16_to_cpu(tallies.RxDiscards_WEPICVError) + | 
 | 				le16_to_cpu(tallies.RxDiscards_WEPExcluded); | 
 | 		wstats->discard.misc += | 
 | 			le16_to_cpu(tallies.TxDiscardsWrongSA); | 
 | 		wstats->discard.fragment += | 
 | 			le16_to_cpu(tallies.RxMsgInBadMsgFragments); | 
 | 		wstats->discard.retries += | 
 | 			le16_to_cpu(tallies.TxRetryLimitExceeded); | 
 | 		/* wstats->miss.beacon - no match */ | 
 | 	} | 
 | 	break; | 
 | 	case HERMES_INQ_LINKSTATUS: { | 
 | 		struct hermes_linkstatus linkstatus; | 
 | 		u16 newstatus; | 
 | 		int connected; | 
 |  | 
 | 		if (priv->iw_mode == IW_MODE_MONITOR) | 
 | 			break; | 
 |  | 
 | 		if (len != sizeof(linkstatus)) { | 
 | 			printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", | 
 | 			       dev->name, len); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, | 
 | 				       infofid, sizeof(info)); | 
 | 		if (err) | 
 | 			break; | 
 | 		newstatus = le16_to_cpu(linkstatus.linkstatus); | 
 |  | 
 | 		/* Symbol firmware uses "out of range" to signal that | 
 | 		 * the hostscan frame can be requested.  */ | 
 | 		if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && | 
 | 		    priv->firmware_type == FIRMWARE_TYPE_SYMBOL && | 
 | 		    priv->has_hostscan && priv->scan_inprogress) { | 
 | 			hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) | 
 | 			|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE) | 
 | 			|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); | 
 |  | 
 | 		if (connected) | 
 | 			netif_carrier_on(dev); | 
 | 		else if (!ignore_disconnect) | 
 | 			netif_carrier_off(dev); | 
 |  | 
 | 		if (newstatus != priv->last_linkstatus) { | 
 | 			priv->last_linkstatus = newstatus; | 
 | 			print_linkstatus(dev, newstatus); | 
 | 			/* The info frame contains only one word which is the | 
 | 			 * status (see hermes.h). The status is pretty boring | 
 | 			 * in itself, that's why we export the new BSSID... | 
 | 			 * Jean II */ | 
 | 			schedule_work(&priv->wevent_work); | 
 | 		} | 
 | 	} | 
 | 	break; | 
 | 	case HERMES_INQ_SCAN: | 
 | 		if (!priv->scan_inprogress && priv->bssid_fixed && | 
 | 		    priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { | 
 | 			schedule_work(&priv->join_work); | 
 | 			break; | 
 | 		} | 
 | 		/* fall through */ | 
 | 	case HERMES_INQ_HOSTSCAN: | 
 | 	case HERMES_INQ_HOSTSCAN_SYMBOL: { | 
 | 		/* Result of a scanning. Contains information about | 
 | 		 * cells in the vicinity - Jean II */ | 
 | 		union iwreq_data	wrqu; | 
 | 		unsigned char *buf; | 
 |  | 
 | 		/* Sanity check */ | 
 | 		if (len > 4096) { | 
 | 			printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", | 
 | 			       dev->name, len); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* We are a strict producer. If the previous scan results | 
 | 		 * have not been consumed, we just have to drop this | 
 | 		 * frame. We can't remove the previous results ourselves, | 
 | 		 * that would be *very* racy... Jean II */ | 
 | 		if (priv->scan_result != NULL) { | 
 | 			printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Allocate buffer for results */ | 
 | 		buf = kmalloc(len, GFP_ATOMIC); | 
 | 		if (buf == NULL) | 
 | 			/* No memory, so can't printk()... */ | 
 | 			break; | 
 |  | 
 | 		/* Read scan data */ | 
 | 		err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, | 
 | 				       infofid, sizeof(info)); | 
 | 		if (err) { | 
 | 			kfree(buf); | 
 | 			break; | 
 | 		} | 
 |  | 
 | #ifdef ORINOCO_DEBUG | 
 | 		{ | 
 | 			int	i; | 
 | 			printk(KERN_DEBUG "Scan result [%02X", buf[0]); | 
 | 			for(i = 1; i < (len * 2); i++) | 
 | 				printk(":%02X", buf[i]); | 
 | 			printk("]\n"); | 
 | 		} | 
 | #endif	/* ORINOCO_DEBUG */ | 
 |  | 
 | 		/* Allow the clients to access the results */ | 
 | 		priv->scan_len = len; | 
 | 		priv->scan_result = buf; | 
 |  | 
 | 		/* Send an empty event to user space. | 
 | 		 * We don't send the received data on the event because | 
 | 		 * it would require us to do complex transcoding, and | 
 | 		 * we want to minimise the work done in the irq handler | 
 | 		 * Use a request to extract the data - Jean II */ | 
 | 		wrqu.data.length = 0; | 
 | 		wrqu.data.flags = 0; | 
 | 		wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); | 
 | 	} | 
 | 	break; | 
 | 	case HERMES_INQ_SEC_STAT_AGERE: | 
 | 		/* Security status (Agere specific) */ | 
 | 		/* Ignore this frame for now */ | 
 | 		if (priv->firmware_type == FIRMWARE_TYPE_AGERE) | 
 | 			break; | 
 | 		/* fall through */ | 
 | 	default: | 
 | 		printk(KERN_DEBUG "%s: Unknown information frame received: " | 
 | 		       "type 0x%04x, length %d\n", dev->name, type, len); | 
 | 		/* We don't actually do anything about it */ | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	if (net_ratelimit()) | 
 | 		printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Internal hardware control routines                               */ | 
 | /********************************************************************/ | 
 |  | 
 | int __orinoco_up(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 |  | 
 | 	netif_carrier_off(dev); /* just to make sure */ | 
 |  | 
 | 	err = __orinoco_program_rids(dev); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d configuring card\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Fire things up again */ | 
 | 	hermes_set_irqmask(hw, ORINOCO_INTEN); | 
 | 	err = hermes_enable_port(hw, 0); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d enabling MAC port\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	netif_start_queue(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int __orinoco_down(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 |  | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	if (! priv->hw_unavailable) { | 
 | 		if (! priv->broken_disableport) { | 
 | 			err = hermes_disable_port(hw, 0); | 
 | 			if (err) { | 
 | 				/* Some firmwares (e.g. Intersil 1.3.x) seem | 
 | 				 * to have problems disabling the port, oh | 
 | 				 * well, too bad. */ | 
 | 				printk(KERN_WARNING "%s: Error %d disabling MAC port\n", | 
 | 				       dev->name, err); | 
 | 				priv->broken_disableport = 1; | 
 | 			} | 
 | 		} | 
 | 		hermes_set_irqmask(hw, 0); | 
 | 		hermes_write_regn(hw, EVACK, 0xffff); | 
 | 	} | 
 | 	 | 
 | 	/* firmware will have to reassociate */ | 
 | 	netif_carrier_off(dev); | 
 | 	priv->last_linkstatus = 0xffff; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_allocate_fid(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 |  | 
 | 	err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); | 
 | 	if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { | 
 | 		/* Try workaround for old Symbol firmware bug */ | 
 | 		printk(KERN_WARNING "%s: firmware ALLOC bug detected " | 
 | 		       "(old Symbol firmware?). Trying to work around... ", | 
 | 		       dev->name); | 
 | 		 | 
 | 		priv->nicbuf_size = TX_NICBUF_SIZE_BUG; | 
 | 		err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); | 
 | 		if (err) | 
 | 			printk("failed!\n"); | 
 | 		else | 
 | 			printk("ok.\n"); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | int orinoco_reinit_firmware(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 |  | 
 | 	err = hermes_init(hw); | 
 | 	if (!err) | 
 | 		err = orinoco_allocate_fid(dev); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) | 
 | { | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 |  | 
 | 	if (priv->bitratemode >= BITRATE_TABLE_SIZE) { | 
 | 		printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", | 
 | 		       priv->ndev->name, priv->bitratemode); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFTXRATECONTROL, | 
 | 					   bitrate_table[priv->bitratemode].agere_txratectrl); | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_INTERSIL: | 
 | 	case FIRMWARE_TYPE_SYMBOL: | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFTXRATECONTROL, | 
 | 					   bitrate_table[priv->bitratemode].intersil_txratectrl); | 
 | 		break; | 
 | 	default: | 
 | 		BUG(); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Set fixed AP address */ | 
 | static int __orinoco_hw_set_wap(struct orinoco_private *priv) | 
 | { | 
 | 	int roaming_flag; | 
 | 	int err = 0; | 
 | 	hermes_t *hw = &priv->hw; | 
 |  | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: | 
 | 		/* not supported */ | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_INTERSIL: | 
 | 		if (priv->bssid_fixed) | 
 | 			roaming_flag = 2; | 
 | 		else | 
 | 			roaming_flag = 1; | 
 |  | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFROAMINGMODE, | 
 | 					   roaming_flag); | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_SYMBOL: | 
 | 		err = HERMES_WRITE_RECORD(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFMANDATORYBSSID_SYMBOL, | 
 | 					  &priv->desired_bssid); | 
 | 		break; | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Change the WEP keys and/or the current keys.  Can be called | 
 |  * either from __orinoco_hw_setup_wep() or directly from | 
 |  * orinoco_ioctl_setiwencode().  In the later case the association | 
 |  * with the AP is not broken (if the firmware can handle it), | 
 |  * which is needed for 802.1x implementations. */ | 
 | static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) | 
 | { | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 |  | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: | 
 | 		err = HERMES_WRITE_RECORD(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFWEPKEYS_AGERE, | 
 | 					  &priv->keys); | 
 | 		if (err) | 
 | 			return err; | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFTXKEY_AGERE, | 
 | 					   priv->tx_key); | 
 | 		if (err) | 
 | 			return err; | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_INTERSIL: | 
 | 	case FIRMWARE_TYPE_SYMBOL: | 
 | 		{ | 
 | 			int keylen; | 
 | 			int i; | 
 |  | 
 | 			/* Force uniform key length to work around firmware bugs */ | 
 | 			keylen = le16_to_cpu(priv->keys[priv->tx_key].len); | 
 | 			 | 
 | 			if (keylen > LARGE_KEY_SIZE) { | 
 | 				printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", | 
 | 				       priv->ndev->name, priv->tx_key, keylen); | 
 | 				return -E2BIG; | 
 | 			} | 
 |  | 
 | 			/* Write all 4 keys */ | 
 | 			for(i = 0; i < ORINOCO_MAX_KEYS; i++) { | 
 | 				err = hermes_write_ltv(hw, USER_BAP, | 
 | 						       HERMES_RID_CNFDEFAULTKEY0 + i, | 
 | 						       HERMES_BYTES_TO_RECLEN(keylen), | 
 | 						       priv->keys[i].data); | 
 | 				if (err) | 
 | 					return err; | 
 | 			} | 
 |  | 
 | 			/* Write the index of the key used in transmission */ | 
 | 			err = hermes_write_wordrec(hw, USER_BAP, | 
 | 						   HERMES_RID_CNFWEPDEFAULTKEYID, | 
 | 						   priv->tx_key); | 
 | 			if (err) | 
 | 				return err; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __orinoco_hw_setup_wep(struct orinoco_private *priv) | 
 | { | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	int master_wep_flag; | 
 | 	int auth_flag; | 
 |  | 
 | 	if (priv->wep_on) | 
 | 		__orinoco_hw_setup_wepkeys(priv); | 
 |  | 
 | 	if (priv->wep_restrict) | 
 | 		auth_flag = HERMES_AUTH_SHARED_KEY; | 
 | 	else | 
 | 		auth_flag = HERMES_AUTH_OPEN; | 
 |  | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ | 
 | 		if (priv->wep_on) { | 
 | 			/* Enable the shared-key authentication. */ | 
 | 			err = hermes_write_wordrec(hw, USER_BAP, | 
 | 						   HERMES_RID_CNFAUTHENTICATION_AGERE, | 
 | 						   auth_flag); | 
 | 		} | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFWEPENABLED_AGERE, | 
 | 					   priv->wep_on); | 
 | 		if (err) | 
 | 			return err; | 
 | 		break; | 
 |  | 
 | 	case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ | 
 | 	case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ | 
 | 		if (priv->wep_on) { | 
 | 			if (priv->wep_restrict || | 
 | 			    (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) | 
 | 				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | | 
 | 						  HERMES_WEP_EXCL_UNENCRYPTED; | 
 | 			else | 
 | 				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; | 
 |  | 
 | 			err = hermes_write_wordrec(hw, USER_BAP, | 
 | 						   HERMES_RID_CNFAUTHENTICATION, | 
 | 						   auth_flag); | 
 | 			if (err) | 
 | 				return err; | 
 | 		} else | 
 | 			master_wep_flag = 0; | 
 |  | 
 | 		if (priv->iw_mode == IW_MODE_MONITOR) | 
 | 			master_wep_flag |= HERMES_WEP_HOST_DECRYPT; | 
 |  | 
 | 		/* Master WEP setting : on/off */ | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFWEPFLAGS_INTERSIL, | 
 | 					   master_wep_flag); | 
 | 		if (err) | 
 | 			return err;	 | 
 |  | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __orinoco_program_rids(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err; | 
 | 	struct hermes_idstring idbuf; | 
 |  | 
 | 	/* Set the MAC address */ | 
 | 	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | 
 | 			       HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting MAC address\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set up the link mode */ | 
 | 	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, | 
 | 				   priv->port_type); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting port type\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 | 	/* Set the channel/frequency */ | 
 | 	if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFOWNCHANNEL, | 
 | 					   priv->channel); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting channel %d\n", | 
 | 			       dev->name, err, priv->channel); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (priv->has_ibss) { | 
 | 		u16 createibss; | 
 |  | 
 | 		if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { | 
 | 			printk(KERN_WARNING "%s: This firmware requires an " | 
 | 			       "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); | 
 | 			/* With wvlan_cs, in this case, we would crash. | 
 | 			 * hopefully, this driver will behave better... | 
 | 			 * Jean II */ | 
 | 			createibss = 0; | 
 | 		} else { | 
 | 			createibss = priv->createibss; | 
 | 		} | 
 | 		 | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFCREATEIBSS, | 
 | 					   createibss); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set the desired BSSID */ | 
 | 	err = __orinoco_hw_set_wap(priv); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting AP address\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 | 	/* Set the desired ESSID */ | 
 | 	idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); | 
 | 	memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); | 
 | 	/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ | 
 | 	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, | 
 | 			       HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), | 
 | 			       &idbuf); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting OWNSSID\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 | 	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, | 
 | 			       HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), | 
 | 			       &idbuf); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set the station name */ | 
 | 	idbuf.len = cpu_to_le16(strlen(priv->nick)); | 
 | 	memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); | 
 | 	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | 
 | 			       HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), | 
 | 			       &idbuf); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting nickname\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set AP density */ | 
 | 	if (priv->has_sensitivity) { | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFSYSTEMSCALE, | 
 | 					   priv->ap_density); | 
 | 		if (err) { | 
 | 			printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE.  " | 
 | 			       "Disabling sensitivity control\n", | 
 | 			       dev->name, err); | 
 |  | 
 | 			priv->has_sensitivity = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set RTS threshold */ | 
 | 	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | 
 | 				   priv->rts_thresh); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting RTS threshold\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set fragmentation threshold or MWO robustness */ | 
 | 	if (priv->has_mwo) | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFMWOROBUST_AGERE, | 
 | 					   priv->mwo_robust); | 
 | 	else | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | 
 | 					   priv->frag_thresh); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting fragmentation\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set bitrate */ | 
 | 	err = __orinoco_hw_set_bitrate(priv); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Error %d setting bitrate\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* Set power management */ | 
 | 	if (priv->has_pm) { | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFPMENABLED, | 
 | 					   priv->pm_on); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting up PM\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 |  | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFMULTICASTRECEIVE, | 
 | 					   priv->pm_mcast); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting up PM\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFMAXSLEEPDURATION, | 
 | 					   priv->pm_period); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting up PM\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFPMHOLDOVERDURATION, | 
 | 					   priv->pm_timeout); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting up PM\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set preamble - only for Symbol so far... */ | 
 | 	if (priv->has_preamble) { | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFPREAMBLE_SYMBOL, | 
 | 					   priv->preamble); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting preamble\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set up encryption */ | 
 | 	if (priv->has_wep) { | 
 | 		err = __orinoco_hw_setup_wep(priv); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d activating WEP\n", | 
 | 			       dev->name, err); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (priv->iw_mode == IW_MODE_MONITOR) { | 
 | 		/* Enable monitor mode */ | 
 | 		dev->type = ARPHRD_IEEE80211; | 
 | 		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |  | 
 | 					    HERMES_TEST_MONITOR, 0, NULL); | 
 | 	} else { | 
 | 		/* Disable monitor mode */ | 
 | 		dev->type = ARPHRD_ETHER; | 
 | 		err = hermes_docmd_wait(hw, HERMES_CMD_TEST | | 
 | 					    HERMES_TEST_STOP, 0, NULL); | 
 | 	} | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* Set promiscuity / multicast*/ | 
 | 	priv->promiscuous = 0; | 
 | 	priv->mc_count = 0; | 
 |  | 
 | 	/* FIXME: what about netif_tx_lock */ | 
 | 	__orinoco_set_multicast_list(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* FIXME: return int? */ | 
 | static void | 
 | __orinoco_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	int promisc, mc_count; | 
 |  | 
 | 	/* The Hermes doesn't seem to have an allmulti mode, so we go | 
 | 	 * into promiscuous mode and let the upper levels deal. */ | 
 | 	if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || | 
 | 	     (dev->mc_count > MAX_MULTICAST(priv)) ) { | 
 | 		promisc = 1; | 
 | 		mc_count = 0; | 
 | 	} else { | 
 | 		promisc = 0; | 
 | 		mc_count = dev->mc_count; | 
 | 	} | 
 |  | 
 | 	if (promisc != priv->promiscuous) { | 
 | 		err = hermes_write_wordrec(hw, USER_BAP, | 
 | 					   HERMES_RID_CNFPROMISCUOUSMODE, | 
 | 					   promisc); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", | 
 | 			       dev->name, err); | 
 | 		} else  | 
 | 			priv->promiscuous = promisc; | 
 | 	} | 
 |  | 
 | 	if (! promisc && (mc_count || priv->mc_count) ) { | 
 | 		struct dev_mc_list *p = dev->mc_list; | 
 | 		struct hermes_multicast mclist; | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < mc_count; i++) { | 
 | 			/* paranoia: is list shorter than mc_count? */ | 
 | 			BUG_ON(! p); | 
 | 			/* paranoia: bad address size in list? */ | 
 | 			BUG_ON(p->dmi_addrlen != ETH_ALEN); | 
 | 			 | 
 | 			memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); | 
 | 			p = p->next; | 
 | 		} | 
 | 		 | 
 | 		if (p) | 
 | 			printk(KERN_WARNING "%s: Multicast list is " | 
 | 			       "longer than mc_count\n", dev->name); | 
 |  | 
 | 		err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, | 
 | 				       HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), | 
 | 				       &mclist); | 
 | 		if (err) | 
 | 			printk(KERN_ERR "%s: Error %d setting multicast list.\n", | 
 | 			       dev->name, err); | 
 | 		else | 
 | 			priv->mc_count = mc_count; | 
 | 	} | 
 |  | 
 | 	/* Since we can set the promiscuous flag when it wasn't asked | 
 | 	   for, make sure the net_device knows about it. */ | 
 | 	if (priv->promiscuous) | 
 | 		dev->flags |= IFF_PROMISC; | 
 | 	else | 
 | 		dev->flags &= ~IFF_PROMISC; | 
 | } | 
 |  | 
 | /* This must be called from user context, without locks held - use | 
 |  * schedule_work() */ | 
 | static void orinoco_reset(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		/* When the hardware becomes available again, whatever | 
 | 		 * detects that is responsible for re-initializing | 
 | 		 * it. So no need for anything further */ | 
 | 		return; | 
 |  | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	/* Shut off interrupts.  Depending on what state the hardware | 
 | 	 * is in, this might not work, but we'll try anyway */ | 
 | 	hermes_set_irqmask(hw, 0); | 
 | 	hermes_write_regn(hw, EVACK, 0xffff); | 
 |  | 
 | 	priv->hw_unavailable++; | 
 | 	priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ | 
 | 	netif_carrier_off(dev); | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 |  	/* Scanning support: Cleanup of driver struct */ | 
 | 	kfree(priv->scan_result); | 
 | 	priv->scan_result = NULL; | 
 | 	priv->scan_inprogress = 0; | 
 |  | 
 | 	if (priv->hard_reset) { | 
 | 		err = (*priv->hard_reset)(priv); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: orinoco_reset: Error %d " | 
 | 			       "performing hard reset\n", dev->name, err); | 
 | 			goto disable; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	err = orinoco_reinit_firmware(dev); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", | 
 | 		       dev->name, err); | 
 | 		goto disable; | 
 | 	} | 
 |  | 
 | 	spin_lock_irq(&priv->lock); /* This has to be called from user context */ | 
 |  | 
 | 	priv->hw_unavailable--; | 
 |  | 
 | 	/* priv->open or priv->hw_unavailable might have changed while | 
 | 	 * we dropped the lock */ | 
 | 	if (priv->open && (! priv->hw_unavailable)) { | 
 | 		err = __orinoco_up(dev); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", | 
 | 			       dev->name, err); | 
 | 		} else | 
 | 			dev->trans_start = jiffies; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irq(&priv->lock); | 
 |  | 
 | 	return; | 
 |  disable: | 
 | 	hermes_set_irqmask(hw, 0); | 
 | 	netif_device_detach(dev); | 
 | 	printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Interrupt handler                                                */ | 
 | /********************************************************************/ | 
 |  | 
 | static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	printk(KERN_DEBUG "%s: TICK\n", dev->name); | 
 | } | 
 |  | 
 | static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) | 
 | { | 
 | 	/* This seems to happen a fair bit under load, but ignoring it | 
 | 	   seems to work fine...*/ | 
 | 	printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", | 
 | 	       dev->name); | 
 | } | 
 |  | 
 | irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) | 
 | { | 
 | 	struct net_device *dev = (struct net_device *)dev_id; | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int count = MAX_IRQLOOPS_PER_IRQ; | 
 | 	u16 evstat, events; | 
 | 	/* These are used to detect a runaway interrupt situation */ | 
 | 	/* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, | 
 | 	 * we panic and shut down the hardware */ | 
 | 	static int last_irq_jiffy = 0; /* jiffies value the last time | 
 | 					* we were called */ | 
 | 	static int loops_this_jiffy = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) { | 
 | 		/* If hw is unavailable - we don't know if the irq was | 
 | 		 * for us or not */ | 
 | 		return IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	evstat = hermes_read_regn(hw, EVSTAT); | 
 | 	events = evstat & hw->inten; | 
 | 	if (! events) { | 
 | 		orinoco_unlock(priv, &flags); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 | 	 | 
 | 	if (jiffies != last_irq_jiffy) | 
 | 		loops_this_jiffy = 0; | 
 | 	last_irq_jiffy = jiffies; | 
 |  | 
 | 	while (events && count--) { | 
 | 		if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { | 
 | 			printk(KERN_WARNING "%s: IRQ handler is looping too " | 
 | 			       "much! Resetting.\n", dev->name); | 
 | 			/* Disable interrupts for now */ | 
 | 			hermes_set_irqmask(hw, 0); | 
 | 			schedule_work(&priv->reset_work); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Check the card hasn't been removed */ | 
 | 		if (! hermes_present(hw)) { | 
 | 			DEBUG(0, "orinoco_interrupt(): card removed\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (events & HERMES_EV_TICK) | 
 | 			__orinoco_ev_tick(dev, hw); | 
 | 		if (events & HERMES_EV_WTERR) | 
 | 			__orinoco_ev_wterr(dev, hw); | 
 | 		if (events & HERMES_EV_INFDROP) | 
 | 			__orinoco_ev_infdrop(dev, hw); | 
 | 		if (events & HERMES_EV_INFO) | 
 | 			__orinoco_ev_info(dev, hw); | 
 | 		if (events & HERMES_EV_RX) | 
 | 			__orinoco_ev_rx(dev, hw); | 
 | 		if (events & HERMES_EV_TXEXC) | 
 | 			__orinoco_ev_txexc(dev, hw); | 
 | 		if (events & HERMES_EV_TX) | 
 | 			__orinoco_ev_tx(dev, hw); | 
 | 		if (events & HERMES_EV_ALLOC) | 
 | 			__orinoco_ev_alloc(dev, hw); | 
 | 		 | 
 | 		hermes_write_regn(hw, EVACK, evstat); | 
 |  | 
 | 		evstat = hermes_read_regn(hw, EVSTAT); | 
 | 		events = evstat & hw->inten; | 
 | 	}; | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Initialization                                                   */ | 
 | /********************************************************************/ | 
 |  | 
 | struct comp_id { | 
 | 	u16 id, variant, major, minor; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) | 
 | { | 
 | 	if (nic_id->id < 0x8000) | 
 | 		return FIRMWARE_TYPE_AGERE; | 
 | 	else if (nic_id->id == 0x8000 && nic_id->major == 0) | 
 | 		return FIRMWARE_TYPE_SYMBOL; | 
 | 	else | 
 | 		return FIRMWARE_TYPE_INTERSIL; | 
 | } | 
 |  | 
 | /* Set priv->firmware type, determine firmware properties */ | 
 | static int determine_firmware(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err; | 
 | 	struct comp_id nic_id, sta_id; | 
 | 	unsigned int firmver; | 
 | 	char tmp[SYMBOL_MAX_VER_LEN+1]; | 
 |  | 
 | 	/* Get the hardware version */ | 
 | 	err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	le16_to_cpus(&nic_id.id); | 
 | 	le16_to_cpus(&nic_id.variant); | 
 | 	le16_to_cpus(&nic_id.major); | 
 | 	le16_to_cpus(&nic_id.minor); | 
 | 	printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", | 
 | 	       dev->name, nic_id.id, nic_id.variant, | 
 | 	       nic_id.major, nic_id.minor); | 
 |  | 
 | 	priv->firmware_type = determine_firmware_type(&nic_id); | 
 |  | 
 | 	/* Get the firmware version */ | 
 | 	err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: Cannot read station identity: error %d\n", | 
 | 		       dev->name, err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	le16_to_cpus(&sta_id.id); | 
 | 	le16_to_cpus(&sta_id.variant); | 
 | 	le16_to_cpus(&sta_id.major); | 
 | 	le16_to_cpus(&sta_id.minor); | 
 | 	printk(KERN_DEBUG "%s: Station identity  %04x:%04x:%04x:%04x\n", | 
 | 	       dev->name, sta_id.id, sta_id.variant, | 
 | 	       sta_id.major, sta_id.minor); | 
 |  | 
 | 	switch (sta_id.id) { | 
 | 	case 0x15: | 
 | 		printk(KERN_ERR "%s: Primary firmware is active\n", | 
 | 		       dev->name); | 
 | 		return -ENODEV; | 
 | 	case 0x14b: | 
 | 		printk(KERN_ERR "%s: Tertiary firmware is active\n", | 
 | 		       dev->name); | 
 | 		return -ENODEV; | 
 | 	case 0x1f:	/* Intersil, Agere, Symbol Spectrum24 */ | 
 | 	case 0x21:	/* Symbol Spectrum24 Trilogy */ | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_NOTICE "%s: Unknown station ID, please report\n", | 
 | 		       dev->name); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* Default capabilities */ | 
 | 	priv->has_sensitivity = 1; | 
 | 	priv->has_mwo = 0; | 
 | 	priv->has_preamble = 0; | 
 | 	priv->has_port3 = 1; | 
 | 	priv->has_ibss = 1; | 
 | 	priv->has_wep = 0; | 
 | 	priv->has_big_wep = 0; | 
 |  | 
 | 	/* Determine capabilities from the firmware version */ | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: | 
 | 		/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, | 
 | 		   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ | 
 | 		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | 
 | 			 "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); | 
 |  | 
 | 		firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; | 
 |  | 
 | 		priv->has_ibss = (firmver >= 0x60006); | 
 | 		priv->has_wep = (firmver >= 0x40020); | 
 | 		priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell | 
 | 					  Gold cards from the others? */ | 
 | 		priv->has_mwo = (firmver >= 0x60000); | 
 | 		priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ | 
 | 		priv->ibss_port = 1; | 
 | 		priv->has_hostscan = (firmver >= 0x8000a); | 
 | 		priv->broken_monitor = (firmver >= 0x80000); | 
 |  | 
 | 		/* Tested with Agere firmware : | 
 | 		 *	1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II | 
 | 		 * Tested CableTron firmware : 4.32 => Anton */ | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_SYMBOL: | 
 | 		/* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ | 
 | 		/* Intel MAC : 00:02:B3:* */ | 
 | 		/* 3Com MAC : 00:50:DA:* */ | 
 | 		memset(tmp, 0, sizeof(tmp)); | 
 | 		/* Get the Symbol firmware version */ | 
 | 		err = hermes_read_ltv(hw, USER_BAP, | 
 | 				      HERMES_RID_SECONDARYVERSION_SYMBOL, | 
 | 				      SYMBOL_MAX_VER_LEN, NULL, &tmp); | 
 | 		if (err) { | 
 | 			printk(KERN_WARNING | 
 | 			       "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", | 
 | 			       dev->name, err); | 
 | 			firmver = 0; | 
 | 			tmp[0] = '\0'; | 
 | 		} else { | 
 | 			/* The firmware revision is a string, the format is | 
 | 			 * something like : "V2.20-01". | 
 | 			 * Quick and dirty parsing... - Jean II | 
 | 			 */ | 
 | 			firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) | 
 | 				| ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) | 
 | 				| (tmp[7] - '0'); | 
 |  | 
 | 			tmp[SYMBOL_MAX_VER_LEN] = '\0'; | 
 | 		} | 
 |  | 
 | 		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | 
 | 			 "Symbol %s", tmp); | 
 |  | 
 | 		priv->has_ibss = (firmver >= 0x20000); | 
 | 		priv->has_wep = (firmver >= 0x15012); | 
 | 		priv->has_big_wep = (firmver >= 0x20000); | 
 | 		priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||  | 
 | 			       (firmver >= 0x29000 && firmver < 0x30000) || | 
 | 			       firmver >= 0x31000; | 
 | 		priv->has_preamble = (firmver >= 0x20000); | 
 | 		priv->ibss_port = 4; | 
 |  		priv->broken_disableport = (firmver == 0x25013) || | 
 |  					   (firmver >= 0x30000 && firmver <= 0x31000); | 
 | 		priv->has_hostscan = (firmver >= 0x31001) || | 
 | 				     (firmver >= 0x29057 && firmver < 0x30000); | 
 | 		/* Tested with Intel firmware : 0x20015 => Jean II */ | 
 | 		/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_INTERSIL: | 
 | 		/* D-Link, Linksys, Adtron, ZoomAir, and many others... | 
 | 		 * Samsung, Compaq 100/200 and Proxim are slightly | 
 | 		 * different and less well tested */ | 
 | 		/* D-Link MAC : 00:40:05:* */ | 
 | 		/* Addtron MAC : 00:90:D1:* */ | 
 | 		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | 
 | 			 "Intersil %d.%d.%d", sta_id.major, sta_id.minor, | 
 | 			 sta_id.variant); | 
 |  | 
 | 		firmver = ((unsigned long)sta_id.major << 16) | | 
 | 			((unsigned long)sta_id.minor << 8) | sta_id.variant; | 
 |  | 
 | 		priv->has_ibss = (firmver >= 0x000700); /* FIXME */ | 
 | 		priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); | 
 | 		priv->has_pm = (firmver >= 0x000700); | 
 | 		priv->has_hostscan = (firmver >= 0x010301); | 
 |  | 
 | 		if (firmver >= 0x000800) | 
 | 			priv->ibss_port = 0; | 
 | 		else { | 
 | 			printk(KERN_NOTICE "%s: Intersil firmware earlier " | 
 | 			       "than v0.8.x - several features not supported\n", | 
 | 			       dev->name); | 
 | 			priv->ibss_port = 1; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | 	printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, | 
 | 	       priv->fw_name); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_init(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	struct hermes_idstring nickbuf; | 
 | 	u16 reclen; | 
 | 	int len; | 
 |  | 
 | 	/* No need to lock, the hw_unavailable flag is already set in | 
 | 	 * alloc_orinocodev() */ | 
 | 	priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN; | 
 |  | 
 | 	/* Initialize the firmware */ | 
 | 	err = hermes_init(hw); | 
 | 	if (err != 0) { | 
 | 		printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", | 
 | 		       dev->name, err); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	err = determine_firmware(dev); | 
 | 	if (err != 0) { | 
 | 		printk(KERN_ERR "%s: Incompatible firmware, aborting\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (priv->has_port3) | 
 | 		printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); | 
 | 	if (priv->has_ibss) | 
 | 		printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", | 
 | 		       dev->name); | 
 | 	if (priv->has_wep) { | 
 | 		printk(KERN_DEBUG "%s: WEP supported, ", dev->name); | 
 | 		if (priv->has_big_wep) | 
 | 			printk("104-bit key\n"); | 
 | 		else | 
 | 			printk("40-bit key\n"); | 
 | 	} | 
 |  | 
 | 	/* Get the MAC address */ | 
 | 	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | 
 | 			      ETH_ALEN, NULL, dev->dev_addr); | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: failed to read MAC address!\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", | 
 | 	       dev->name, dev->dev_addr[0], dev->dev_addr[1], | 
 | 	       dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], | 
 | 	       dev->dev_addr[5]); | 
 |  | 
 | 	/* Get the station name */ | 
 | 	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | 
 | 			      sizeof(nickbuf), &reclen, &nickbuf); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: failed to read station name\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 | 	if (nickbuf.len) | 
 | 		len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); | 
 | 	else | 
 | 		len = min(IW_ESSID_MAX_SIZE, 2 * reclen); | 
 | 	memcpy(priv->nick, &nickbuf.val, len); | 
 | 	priv->nick[len] = '\0'; | 
 |  | 
 | 	printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); | 
 |  | 
 | 	err = orinoco_allocate_fid(dev); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Get allowed channels */ | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, | 
 | 				  &priv->channel_mask); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: failed to read channel list!\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Get initial AP density */ | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, | 
 | 				  &priv->ap_density); | 
 | 	if (err || priv->ap_density < 1 || priv->ap_density > 3) { | 
 | 		priv->has_sensitivity = 0; | 
 | 	} | 
 |  | 
 | 	/* Get initial RTS threshold */ | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | 
 | 				  &priv->rts_thresh); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: failed to read RTS threshold!\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Get initial fragmentation settings */ | 
 | 	if (priv->has_mwo) | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFMWOROBUST_AGERE, | 
 | 					  &priv->mwo_robust); | 
 | 	else | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | 
 | 					  &priv->frag_thresh); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR "%s: failed to read fragmentation settings!\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Power management setup */ | 
 | 	if (priv->has_pm) { | 
 | 		priv->pm_on = 0; | 
 | 		priv->pm_mcast = 1; | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFMAXSLEEPDURATION, | 
 | 					  &priv->pm_period); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: failed to read power management period!\n", | 
 | 			       dev->name); | 
 | 			goto out; | 
 | 		} | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFPMHOLDOVERDURATION, | 
 | 					  &priv->pm_timeout); | 
 | 		if (err) { | 
 | 			printk(KERN_ERR "%s: failed to read power management timeout!\n", | 
 | 			       dev->name); | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Preamble setup */ | 
 | 	if (priv->has_preamble) { | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFPREAMBLE_SYMBOL, | 
 | 					  &priv->preamble); | 
 | 		if (err) | 
 | 			goto out; | 
 | 	} | 
 | 		 | 
 | 	/* Set up the default configuration */ | 
 | 	priv->iw_mode = IW_MODE_INFRA; | 
 | 	/* By default use IEEE/IBSS ad-hoc mode if we have it */ | 
 | 	priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); | 
 | 	set_port_type(priv); | 
 | 	priv->channel = 0; /* use firmware default */ | 
 |  | 
 | 	priv->promiscuous = 0; | 
 | 	priv->wep_on = 0; | 
 | 	priv->tx_key = 0; | 
 |  | 
 | 	/* Make the hardware available, as long as it hasn't been | 
 | 	 * removed elsewhere (e.g. by PCMCIA hot unplug) */ | 
 | 	spin_lock_irq(&priv->lock); | 
 | 	priv->hw_unavailable--; | 
 | 	spin_unlock_irq(&priv->lock); | 
 |  | 
 | 	printk(KERN_DEBUG "%s: ready\n", dev->name); | 
 |  | 
 |  out: | 
 | 	return err; | 
 | } | 
 |  | 
 | struct net_device *alloc_orinocodev(int sizeof_card, | 
 | 				    int (*hard_reset)(struct orinoco_private *)) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	struct orinoco_private *priv; | 
 |  | 
 | 	dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); | 
 | 	if (! dev) | 
 | 		return NULL; | 
 | 	priv = netdev_priv(dev); | 
 | 	priv->ndev = dev; | 
 | 	if (sizeof_card) | 
 | 		priv->card = (void *)((unsigned long)priv | 
 | 				      + sizeof(struct orinoco_private)); | 
 | 	else | 
 | 		priv->card = NULL; | 
 |  | 
 | 	/* Setup / override net_device fields */ | 
 | 	dev->init = orinoco_init; | 
 | 	dev->hard_start_xmit = orinoco_xmit; | 
 | 	dev->tx_timeout = orinoco_tx_timeout; | 
 | 	dev->watchdog_timeo = HZ; /* 1 second timeout */ | 
 | 	dev->get_stats = orinoco_get_stats; | 
 | 	dev->ethtool_ops = &orinoco_ethtool_ops; | 
 | 	dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; | 
 | #ifdef WIRELESS_SPY | 
 | 	priv->wireless_data.spy_data = &priv->spy_data; | 
 | 	dev->wireless_data = &priv->wireless_data; | 
 | #endif | 
 | 	dev->change_mtu = orinoco_change_mtu; | 
 | 	dev->set_multicast_list = orinoco_set_multicast_list; | 
 | 	/* we use the default eth_mac_addr for setting the MAC addr */ | 
 |  | 
 | 	/* Set up default callbacks */ | 
 | 	dev->open = orinoco_open; | 
 | 	dev->stop = orinoco_stop; | 
 | 	priv->hard_reset = hard_reset; | 
 |  | 
 | 	spin_lock_init(&priv->lock); | 
 | 	priv->open = 0; | 
 | 	priv->hw_unavailable = 1; /* orinoco_init() must clear this | 
 | 				   * before anything else touches the | 
 | 				   * hardware */ | 
 | 	INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); | 
 | 	INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev); | 
 | 	INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev); | 
 |  | 
 | 	netif_carrier_off(dev); | 
 | 	priv->last_linkstatus = 0xffff; | 
 |  | 
 | 	return dev; | 
 |  | 
 | } | 
 |  | 
 | void free_orinocodev(struct net_device *dev) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	kfree(priv->scan_result); | 
 | 	free_netdev(dev); | 
 | } | 
 |  | 
 | /********************************************************************/ | 
 | /* Wireless extensions                                              */ | 
 | /********************************************************************/ | 
 |  | 
 | static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, | 
 | 				char buf[IW_ESSID_MAX_SIZE+1]) | 
 | { | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	struct hermes_idstring essidbuf; | 
 | 	char *p = (char *)(&essidbuf.val); | 
 | 	int len; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (strlen(priv->desired_essid) > 0) { | 
 | 		/* We read the desired SSID from the hardware rather | 
 | 		   than from priv->desired_essid, just in case the | 
 | 		   firmware is allowed to change it on us. I'm not | 
 | 		   sure about this */ | 
 | 		/* My guess is that the OWNSSID should always be whatever | 
 | 		 * we set to the card, whereas CURRENT_SSID is the one that | 
 | 		 * may change... - Jean II */ | 
 | 		u16 rid; | 
 |  | 
 | 		*active = 1; | 
 |  | 
 | 		rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : | 
 | 			HERMES_RID_CNFDESIREDSSID; | 
 | 		 | 
 | 		err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), | 
 | 				      NULL, &essidbuf); | 
 | 		if (err) | 
 | 			goto fail_unlock; | 
 | 	} else { | 
 | 		*active = 0; | 
 |  | 
 | 		err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, | 
 | 				      sizeof(essidbuf), NULL, &essidbuf); | 
 | 		if (err) | 
 | 			goto fail_unlock; | 
 | 	} | 
 |  | 
 | 	len = le16_to_cpu(essidbuf.len); | 
 | 	BUG_ON(len > IW_ESSID_MAX_SIZE); | 
 |  | 
 | 	memset(buf, 0, IW_ESSID_MAX_SIZE+1); | 
 | 	memcpy(buf, p, len); | 
 | 	buf[len] = '\0'; | 
 |  | 
 |  fail_unlock: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err;        | 
 | } | 
 |  | 
 | static long orinoco_hw_get_freq(struct orinoco_private *priv) | 
 | { | 
 | 	 | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	u16 channel; | 
 | 	long freq = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	 | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	/* Intersil firmware 1.3.5 returns 0 when the interface is down */ | 
 | 	if (channel == 0) { | 
 | 		err = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if ( (channel < 1) || (channel > NUM_CHANNELS) ) { | 
 | 		printk(KERN_WARNING "%s: Channel out of range (%d)!\n", | 
 | 		       priv->ndev->name, channel); | 
 | 		err = -EBUSY; | 
 | 		goto out; | 
 |  | 
 | 	} | 
 | 	freq = channel_frequency[channel-1] * 100000; | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	if (err > 0) | 
 | 		err = -EBUSY; | 
 | 	return err ? err : freq; | 
 | } | 
 |  | 
 | static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, | 
 | 				      int *numrates, s32 *rates, int max) | 
 | { | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	struct hermes_idstring list; | 
 | 	unsigned char *p = (unsigned char *)&list.val; | 
 | 	int err = 0; | 
 | 	int num; | 
 | 	int i; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, | 
 | 			      sizeof(list), NULL, &list); | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 | 	 | 
 | 	num = le16_to_cpu(list.len); | 
 | 	*numrates = num; | 
 | 	num = min(num, max); | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 | 		rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getname(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 char *name, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int numrates; | 
 | 	int err; | 
 |  | 
 | 	err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); | 
 |  | 
 | 	if (!err && (numrates > 2)) | 
 | 		strcpy(name, "IEEE 802.11b"); | 
 | 	else | 
 | 		strcpy(name, "IEEE 802.11-DS"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setwap(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				struct sockaddr *ap_addr, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 | 	unsigned long flags; | 
 | 	static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | 
 | 	static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* Enable automatic roaming - no sanity checks are needed */ | 
 | 	if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || | 
 | 	    memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { | 
 | 		priv->bssid_fixed = 0; | 
 | 		memset(priv->desired_bssid, 0, ETH_ALEN); | 
 |  | 
 | 		/* "off" means keep existing connection */ | 
 | 		if (ap_addr->sa_data[0] == 0) { | 
 | 			__orinoco_hw_set_wap(priv); | 
 | 			err = 0; | 
 | 		} | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { | 
 | 		printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " | 
 | 		       "support manual roaming\n", | 
 | 		       dev->name); | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (priv->iw_mode != IW_MODE_INFRA) { | 
 | 		printk(KERN_WARNING "%s: Manual roaming supported only in " | 
 | 		       "managed mode\n", dev->name); | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Intersil firmware hangs without Desired ESSID */ | 
 | 	if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && | 
 | 	    strlen(priv->desired_essid) == 0) { | 
 | 		printk(KERN_WARNING "%s: Desired ESSID must be set for " | 
 | 		       "manual roaming\n", dev->name); | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Finally, enable manual roaming */ | 
 | 	priv->bssid_fixed = 1; | 
 | 	memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getwap(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				struct sockaddr *ap_addr, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	ap_addr->sa_family = ARPHRD_ETHER; | 
 | 	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, | 
 | 			      ETH_ALEN, NULL, ap_addr->sa_data); | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setmode(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 u32 *mode, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (priv->iw_mode == *mode) | 
 | 		return 0; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	switch (*mode) { | 
 | 	case IW_MODE_ADHOC: | 
 | 		if (!priv->has_ibss && !priv->has_port3) | 
 | 			err = -EOPNOTSUPP; | 
 | 		break; | 
 |  | 
 | 	case IW_MODE_INFRA: | 
 | 		break; | 
 |  | 
 | 	case IW_MODE_MONITOR: | 
 | 		if (priv->broken_monitor && !force_monitor) { | 
 | 			printk(KERN_WARNING "%s: Monitor mode support is " | 
 | 			       "buggy in this firmware, not enabling\n", | 
 | 			       dev->name); | 
 | 			err = -EOPNOTSUPP; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		err = -EOPNOTSUPP; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (err == -EINPROGRESS) { | 
 | 		priv->iw_mode = *mode; | 
 | 		set_port_type(priv); | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getmode(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 u32 *mode, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	*mode = priv->iw_mode; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getiwrange(struct net_device *dev, | 
 | 				    struct iw_request_info *info, | 
 | 				    struct iw_point *rrq, | 
 | 				    char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = 0; | 
 | 	struct iw_range *range = (struct iw_range *) extra; | 
 | 	int numrates; | 
 | 	int i, k; | 
 |  | 
 | 	rrq->length = sizeof(struct iw_range); | 
 | 	memset(range, 0, sizeof(struct iw_range)); | 
 |  | 
 | 	range->we_version_compiled = WIRELESS_EXT; | 
 | 	range->we_version_source = 14; | 
 |  | 
 | 	/* Set available channels/frequencies */ | 
 | 	range->num_channels = NUM_CHANNELS; | 
 | 	k = 0; | 
 | 	for (i = 0; i < NUM_CHANNELS; i++) { | 
 | 		if (priv->channel_mask & (1 << i)) { | 
 | 			range->freq[k].i = i + 1; | 
 | 			range->freq[k].m = channel_frequency[i] * 100000; | 
 | 			range->freq[k].e = 1; | 
 | 			k++; | 
 | 		} | 
 | 		 | 
 | 		if (k >= IW_MAX_FREQUENCIES) | 
 | 			break; | 
 | 	} | 
 | 	range->num_frequency = k; | 
 | 	range->sensitivity = 3; | 
 |  | 
 | 	if (priv->has_wep) { | 
 | 		range->max_encoding_tokens = ORINOCO_MAX_KEYS; | 
 | 		range->encoding_size[0] = SMALL_KEY_SIZE; | 
 | 		range->num_encoding_sizes = 1; | 
 |  | 
 | 		if (priv->has_big_wep) { | 
 | 			range->encoding_size[1] = LARGE_KEY_SIZE; | 
 | 			range->num_encoding_sizes = 2; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ | 
 | 		/* Quality stats meaningless in ad-hoc mode */ | 
 | 	} else { | 
 | 		range->max_qual.qual = 0x8b - 0x2f; | 
 | 		range->max_qual.level = 0x2f - 0x95 - 1; | 
 | 		range->max_qual.noise = 0x2f - 0x95 - 1; | 
 | 		/* Need to get better values */ | 
 | 		range->avg_qual.qual = 0x24; | 
 | 		range->avg_qual.level = 0xC2; | 
 | 		range->avg_qual.noise = 0x9E; | 
 | 	} | 
 |  | 
 | 	err = orinoco_hw_get_bitratelist(priv, &numrates, | 
 | 					 range->bitrate, IW_MAX_BITRATES); | 
 | 	if (err) | 
 | 		return err; | 
 | 	range->num_bitrates = numrates; | 
 |  | 
 | 	/* Set an indication of the max TCP throughput in bit/s that we can | 
 | 	 * expect using this interface. May be use for QoS stuff... | 
 | 	 * Jean II */ | 
 | 	if (numrates > 2) | 
 | 		range->throughput = 5 * 1000 * 1000;	/* ~5 Mb/s */ | 
 | 	else | 
 | 		range->throughput = 1.5 * 1000 * 1000;	/* ~1.5 Mb/s */ | 
 |  | 
 | 	range->min_rts = 0; | 
 | 	range->max_rts = 2347; | 
 | 	range->min_frag = 256; | 
 | 	range->max_frag = 2346; | 
 |  | 
 | 	range->min_pmp = 0; | 
 | 	range->max_pmp = 65535000; | 
 | 	range->min_pmt = 0; | 
 | 	range->max_pmt = 65535 * 1000;	/* ??? */ | 
 | 	range->pmp_flags = IW_POWER_PERIOD; | 
 | 	range->pmt_flags = IW_POWER_TIMEOUT; | 
 | 	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; | 
 |  | 
 | 	range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; | 
 | 	range->retry_flags = IW_RETRY_LIMIT; | 
 | 	range->r_time_flags = IW_RETRY_LIFETIME; | 
 | 	range->min_retry = 0; | 
 | 	range->max_retry = 65535;	/* ??? */ | 
 | 	range->min_r_time = 0; | 
 | 	range->max_r_time = 65535 * 1000;	/* ??? */ | 
 |  | 
 | 	/* Event capability (kernel) */ | 
 | 	IW_EVENT_CAPA_SET_KERNEL(range->event_capa); | 
 | 	/* Event capability (driver) */ | 
 | 	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); | 
 | 	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); | 
 | 	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); | 
 | 	IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setiwencode(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     struct iw_point *erq, | 
 | 				     char *keybuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int index = (erq->flags & IW_ENCODE_INDEX) - 1; | 
 | 	int setindex = priv->tx_key; | 
 | 	int enable = priv->wep_on; | 
 | 	int restricted = priv->wep_restrict; | 
 | 	u16 xlen = 0; | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (! priv->has_wep) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (erq->pointer) { | 
 | 		/* We actually have a key to set - check its length */ | 
 | 		if (erq->length > LARGE_KEY_SIZE) | 
 | 			return -E2BIG; | 
 |  | 
 | 		if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) | 
 | 			return -E2BIG; | 
 | 	} | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (erq->pointer) { | 
 | 		if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) | 
 | 			index = priv->tx_key; | 
 |  | 
 | 		/* Adjust key length to a supported value */ | 
 | 		if (erq->length > SMALL_KEY_SIZE) { | 
 | 			xlen = LARGE_KEY_SIZE; | 
 | 		} else if (erq->length > 0) { | 
 | 			xlen = SMALL_KEY_SIZE; | 
 | 		} else | 
 | 			xlen = 0; | 
 |  | 
 | 		/* Switch on WEP if off */ | 
 | 		if ((!enable) && (xlen > 0)) { | 
 | 			setindex = index; | 
 | 			enable = 1; | 
 | 		} | 
 | 	} else { | 
 | 		/* Important note : if the user do "iwconfig eth0 enc off", | 
 | 		 * we will arrive there with an index of -1. This is valid | 
 | 		 * but need to be taken care off... Jean II */ | 
 | 		if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { | 
 | 			if((index != -1) || (erq->flags == 0)) { | 
 | 				err = -EINVAL; | 
 | 				goto out; | 
 | 			} | 
 | 		} else { | 
 | 			/* Set the index : Check that the key is valid */ | 
 | 			if(priv->keys[index].len == 0) { | 
 | 				err = -EINVAL; | 
 | 				goto out; | 
 | 			} | 
 | 			setindex = index; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (erq->flags & IW_ENCODE_DISABLED) | 
 | 		enable = 0; | 
 | 	if (erq->flags & IW_ENCODE_OPEN) | 
 | 		restricted = 0; | 
 | 	if (erq->flags & IW_ENCODE_RESTRICTED) | 
 | 		restricted = 1; | 
 |  | 
 | 	if (erq->pointer) { | 
 | 		priv->keys[index].len = cpu_to_le16(xlen); | 
 | 		memset(priv->keys[index].data, 0, | 
 | 		       sizeof(priv->keys[index].data)); | 
 | 		memcpy(priv->keys[index].data, keybuf, erq->length); | 
 | 	} | 
 | 	priv->tx_key = setindex; | 
 |  | 
 | 	/* Try fast key change if connected and only keys are changed */ | 
 | 	if (priv->wep_on && enable && (priv->wep_restrict == restricted) && | 
 | 	    netif_carrier_ok(dev)) { | 
 | 		err = __orinoco_hw_setup_wepkeys(priv); | 
 | 		/* No need to commit if successful */ | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	priv->wep_on = enable; | 
 | 	priv->wep_restrict = restricted; | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getiwencode(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     struct iw_point *erq, | 
 | 				     char *keybuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int index = (erq->flags & IW_ENCODE_INDEX) - 1; | 
 | 	u16 xlen = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (! priv->has_wep) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) | 
 | 		index = priv->tx_key; | 
 |  | 
 | 	erq->flags = 0; | 
 | 	if (! priv->wep_on) | 
 | 		erq->flags |= IW_ENCODE_DISABLED; | 
 | 	erq->flags |= index + 1; | 
 |  | 
 | 	if (priv->wep_restrict) | 
 | 		erq->flags |= IW_ENCODE_RESTRICTED; | 
 | 	else | 
 | 		erq->flags |= IW_ENCODE_OPEN; | 
 |  | 
 | 	xlen = le16_to_cpu(priv->keys[index].len); | 
 |  | 
 | 	erq->length = xlen; | 
 |  | 
 | 	memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setessid(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  struct iw_point *erq, | 
 | 				  char *essidbuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it | 
 | 	 * anyway... - Jean II */ | 
 |  | 
 | 	/* Hum... Should not use Wireless Extension constant (may change), | 
 | 	 * should use our own... - Jean II */ | 
 | 	if (erq->length > IW_ESSID_MAX_SIZE) | 
 | 		return -E2BIG; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ | 
 | 	memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); | 
 |  | 
 | 	/* If not ANY, get the new ESSID */ | 
 | 	if (erq->flags) { | 
 | 		memcpy(priv->desired_essid, essidbuf, erq->length); | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getessid(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  struct iw_point *erq, | 
 | 				  char *essidbuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int active; | 
 | 	int err = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (netif_running(dev)) { | 
 | 		err = orinoco_hw_get_essid(priv, &active, essidbuf); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} else { | 
 | 		if (orinoco_lock(priv, &flags) != 0) | 
 | 			return -EBUSY; | 
 | 		memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE + 1); | 
 | 		orinoco_unlock(priv, &flags); | 
 | 	} | 
 |  | 
 | 	erq->flags = 1; | 
 | 	erq->length = strlen(essidbuf) + 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setnick(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_point *nrq, | 
 | 				 char *nickbuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (nrq->length > IW_ESSID_MAX_SIZE) | 
 | 		return -E2BIG; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	memset(priv->nick, 0, sizeof(priv->nick)); | 
 | 	memcpy(priv->nick, nickbuf, nrq->length); | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getnick(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_point *nrq, | 
 | 				 char *nickbuf) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	nrq->length = strlen(nickbuf)+1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setfreq(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_freq *frq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int chan = -1; | 
 | 	unsigned long flags; | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 |  | 
 | 	/* In infrastructure mode the AP sets the channel */ | 
 | 	if (priv->iw_mode == IW_MODE_INFRA) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if ( (frq->e == 0) && (frq->m <= 1000) ) { | 
 | 		/* Setting by channel number */ | 
 | 		chan = frq->m; | 
 | 	} else { | 
 | 		/* Setting by frequency - search the table */ | 
 | 		int mult = 1; | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < (6 - frq->e); i++) | 
 | 			mult *= 10; | 
 |  | 
 | 		for (i = 0; i < NUM_CHANNELS; i++) | 
 | 			if (frq->m == (channel_frequency[i] * mult)) | 
 | 				chan = i+1; | 
 | 	} | 
 |  | 
 | 	if ( (chan < 1) || (chan > NUM_CHANNELS) || | 
 | 	     ! (priv->channel_mask & (1 << (chan-1)) ) ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	priv->channel = chan; | 
 | 	if (priv->iw_mode == IW_MODE_MONITOR) { | 
 | 		/* Fast channel change - no commit if successful */ | 
 | 		hermes_t *hw = &priv->hw; | 
 | 		err = hermes_docmd_wait(hw, HERMES_CMD_TEST | | 
 | 					    HERMES_TEST_SET_CHANNEL, | 
 | 					chan, NULL); | 
 | 	} | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getfreq(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_freq *frq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int tmp; | 
 |  | 
 | 	/* Locking done in there */ | 
 | 	tmp = orinoco_hw_get_freq(priv); | 
 | 	if (tmp < 0) { | 
 | 		return tmp; | 
 | 	} | 
 |  | 
 | 	frq->m = tmp; | 
 | 	frq->e = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getsens(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *srq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	u16 val; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!priv->has_sensitivity) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, | 
 | 				  HERMES_RID_CNFSYSTEMSCALE, &val); | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	srq->value = val; | 
 | 	srq->fixed = 0; /* auto */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setsens(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *srq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int val = srq->value; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!priv->has_sensitivity) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if ((val < 1) || (val > 3)) | 
 | 		return -EINVAL; | 
 | 	 | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	priv->ap_density = val; | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setrts(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				struct iw_param *rrq, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int val = rrq->value; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (rrq->disabled) | 
 | 		val = 2347; | 
 |  | 
 | 	if ( (val < 0) || (val > 2347) ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	priv->rts_thresh = val; | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getrts(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				struct iw_param *rrq, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	rrq->value = priv->rts_thresh; | 
 | 	rrq->disabled = (rrq->value == 2347); | 
 | 	rrq->fixed = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setfrag(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *frq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (priv->has_mwo) { | 
 | 		if (frq->disabled) | 
 | 			priv->mwo_robust = 0; | 
 | 		else { | 
 | 			if (frq->fixed) | 
 | 				printk(KERN_WARNING "%s: Fixed fragmentation is " | 
 | 				       "not supported on this firmware. " | 
 | 				       "Using MWO robust instead.\n", dev->name); | 
 | 			priv->mwo_robust = 1; | 
 | 		} | 
 | 	} else { | 
 | 		if (frq->disabled) | 
 | 			priv->frag_thresh = 2346; | 
 | 		else { | 
 | 			if ( (frq->value < 256) || (frq->value > 2346) ) | 
 | 				err = -EINVAL; | 
 | 			else | 
 | 				priv->frag_thresh = frq->value & ~0x1; /* must be even */ | 
 | 		} | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getfrag(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *frq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err; | 
 | 	u16 val; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	 | 
 | 	if (priv->has_mwo) { | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CNFMWOROBUST_AGERE, | 
 | 					  &val); | 
 | 		if (err) | 
 | 			val = 0; | 
 |  | 
 | 		frq->value = val ? 2347 : 0; | 
 | 		frq->disabled = ! val; | 
 | 		frq->fixed = 0; | 
 | 	} else { | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | 
 | 					  &val); | 
 | 		if (err) | 
 | 			val = 0; | 
 |  | 
 | 		frq->value = val; | 
 | 		frq->disabled = (val >= 2346); | 
 | 		frq->fixed = 1; | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	 | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setrate(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *rrq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int ratemode = -1; | 
 | 	int bitrate; /* 100s of kilobits */ | 
 | 	int i; | 
 | 	unsigned long flags; | 
 | 	 | 
 | 	/* As the user space doesn't know our highest rate, it uses -1 | 
 | 	 * to ask us to set the highest rate.  Test it using "iwconfig | 
 | 	 * ethX rate auto" - Jean II */ | 
 | 	if (rrq->value == -1) | 
 | 		bitrate = 110; | 
 | 	else { | 
 | 		if (rrq->value % 100000) | 
 | 			return -EINVAL; | 
 | 		bitrate = rrq->value / 100000; | 
 | 	} | 
 |  | 
 | 	if ( (bitrate != 10) && (bitrate != 20) && | 
 | 	     (bitrate != 55) && (bitrate != 110) ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (i = 0; i < BITRATE_TABLE_SIZE; i++) | 
 | 		if ( (bitrate_table[i].bitrate == bitrate) && | 
 | 		     (bitrate_table[i].automatic == ! rrq->fixed) ) { | 
 | 			ratemode = i; | 
 | 			break; | 
 | 		} | 
 | 	 | 
 | 	if (ratemode == -1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	priv->bitratemode = ratemode; | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getrate(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *rrq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	int ratemode; | 
 | 	int i; | 
 | 	u16 val; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	ratemode = priv->bitratemode; | 
 |  | 
 | 	BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); | 
 |  | 
 | 	rrq->value = bitrate_table[ratemode].bitrate * 100000; | 
 | 	rrq->fixed = ! bitrate_table[ratemode].automatic; | 
 | 	rrq->disabled = 0; | 
 |  | 
 | 	/* If the interface is running we try to find more about the | 
 | 	   current mode */ | 
 | 	if (netif_running(dev)) { | 
 | 		err = hermes_read_wordrec(hw, USER_BAP, | 
 | 					  HERMES_RID_CURRENTTXRATE, &val); | 
 | 		if (err) | 
 | 			goto out; | 
 | 		 | 
 | 		switch (priv->firmware_type) { | 
 | 		case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ | 
 | 			/* Note : in Lucent firmware, the return value of | 
 | 			 * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, | 
 | 			 * and therefore is totally different from the | 
 | 			 * encoding of HERMES_RID_CNFTXRATECONTROL. | 
 | 			 * Don't forget that 6Mb/s is really 5.5Mb/s */ | 
 | 			if (val == 6) | 
 | 				rrq->value = 5500000; | 
 | 			else | 
 | 				rrq->value = val * 1000000; | 
 | 			break; | 
 | 		case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ | 
 | 		case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ | 
 | 			for (i = 0; i < BITRATE_TABLE_SIZE; i++) | 
 | 				if (bitrate_table[i].intersil_txratectrl == val) { | 
 | 					ratemode = i; | 
 | 					break; | 
 | 				} | 
 | 			if (i >= BITRATE_TABLE_SIZE) | 
 | 				printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", | 
 | 				       dev->name, val); | 
 |  | 
 | 			rrq->value = bitrate_table[ratemode].bitrate * 100000; | 
 | 			break; | 
 | 		default: | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setpower(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  struct iw_param *prq, | 
 | 				  char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = -EINPROGRESS;		/* Call commit handler */ | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (prq->disabled) { | 
 | 		priv->pm_on = 0; | 
 | 	} else { | 
 | 		switch (prq->flags & IW_POWER_MODE) { | 
 | 		case IW_POWER_UNICAST_R: | 
 | 			priv->pm_mcast = 0; | 
 | 			priv->pm_on = 1; | 
 | 			break; | 
 | 		case IW_POWER_ALL_R: | 
 | 			priv->pm_mcast = 1; | 
 | 			priv->pm_on = 1; | 
 | 			break; | 
 | 		case IW_POWER_ON: | 
 | 			/* No flags : but we may have a value - Jean II */ | 
 | 			break; | 
 | 		default: | 
 | 			err = -EINVAL; | 
 | 			goto out; | 
 | 		} | 
 | 		 | 
 | 		if (prq->flags & IW_POWER_TIMEOUT) { | 
 | 			priv->pm_on = 1; | 
 | 			priv->pm_timeout = prq->value / 1000; | 
 | 		} | 
 | 		if (prq->flags & IW_POWER_PERIOD) { | 
 | 			priv->pm_on = 1; | 
 | 			priv->pm_period = prq->value / 1000; | 
 | 		} | 
 | 		/* It's valid to not have a value if we are just toggling | 
 | 		 * the flags... Jean II */ | 
 | 		if(!priv->pm_on) { | 
 | 			err = -EINVAL; | 
 | 			goto out; | 
 | 		}			 | 
 | 	} | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getpower(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  struct iw_param *prq, | 
 | 				  char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	u16 enable, period, timeout, mcast; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	 | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, | 
 | 				  HERMES_RID_CNFMAXSLEEPDURATION, &period); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	prq->disabled = !enable; | 
 | 	/* Note : by default, display the period */ | 
 | 	if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { | 
 | 		prq->flags = IW_POWER_TIMEOUT; | 
 | 		prq->value = timeout * 1000; | 
 | 	} else { | 
 | 		prq->flags = IW_POWER_PERIOD; | 
 | 		prq->value = period * 1000; | 
 | 	} | 
 | 	if (mcast) | 
 | 		prq->flags |= IW_POWER_ALL_R; | 
 | 	else | 
 | 		prq->flags |= IW_POWER_UNICAST_R; | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getretry(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  struct iw_param *rrq, | 
 | 				  char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	u16 short_limit, long_limit, lifetime; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 | 	 | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, | 
 | 				  &short_limit); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, | 
 | 				  &long_limit); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, | 
 | 				  &lifetime); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	rrq->disabled = 0;		/* Can't be disabled */ | 
 |  | 
 | 	/* Note : by default, display the retry number */ | 
 | 	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { | 
 | 		rrq->flags = IW_RETRY_LIFETIME; | 
 | 		rrq->value = lifetime * 1000;	/* ??? */ | 
 | 	} else { | 
 | 		/* By default, display the min number */ | 
 | 		if ((rrq->flags & IW_RETRY_MAX)) { | 
 | 			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; | 
 | 			rrq->value = long_limit; | 
 | 		} else { | 
 | 			rrq->flags = IW_RETRY_LIMIT; | 
 | 			rrq->value = short_limit; | 
 | 			if(short_limit != long_limit) | 
 | 				rrq->flags |= IW_RETRY_MIN; | 
 | 		} | 
 | 	} | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_reset(struct net_device *dev, | 
 | 			       struct iw_request_info *info, | 
 | 			       void *wrqu, | 
 | 			       char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	if (! capable(CAP_NET_ADMIN)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { | 
 | 		printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); | 
 |  | 
 | 		/* Firmware reset */ | 
 | 		orinoco_reset(dev); | 
 | 	} else { | 
 | 		printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); | 
 |  | 
 | 		schedule_work(&priv->reset_work); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setibssport(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     void *wrqu, | 
 | 				     char *extra) | 
 |  | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int val = *( (int *) extra ); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	priv->ibss_port = val ; | 
 |  | 
 | 	/* Actually update the mode we are using */ | 
 | 	set_port_type(priv); | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getibssport(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     void *wrqu, | 
 | 				     char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int *val = (int *) extra; | 
 |  | 
 | 	*val = priv->ibss_port; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setport3(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  void *wrqu, | 
 | 				  char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int val = *( (int *) extra ); | 
 | 	int err = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	switch (val) { | 
 | 	case 0: /* Try to do IEEE ad-hoc mode */ | 
 | 		if (! priv->has_ibss) { | 
 | 			err = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		priv->prefer_port3 = 0; | 
 | 			 | 
 | 		break; | 
 |  | 
 | 	case 1: /* Try to do Lucent proprietary ad-hoc mode */ | 
 | 		if (! priv->has_port3) { | 
 | 			err = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		priv->prefer_port3 = 1; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		err = -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (! err) { | 
 | 		/* Actually update the mode we are using */ | 
 | 		set_port_type(priv); | 
 | 		err = -EINPROGRESS; | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getport3(struct net_device *dev, | 
 | 				  struct iw_request_info *info, | 
 | 				  void *wrqu, | 
 | 				  char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int *val = (int *) extra; | 
 |  | 
 | 	*val = priv->prefer_port3; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int orinoco_ioctl_setpreamble(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     void *wrqu, | 
 | 				     char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 | 	int val; | 
 |  | 
 | 	if (! priv->has_preamble) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	/* 802.11b has recently defined some short preamble. | 
 | 	 * Basically, the Phy header has been reduced in size. | 
 | 	 * This increase performance, especially at high rates | 
 | 	 * (the preamble is transmitted at 1Mb/s), unfortunately | 
 | 	 * this give compatibility troubles... - Jean II */ | 
 | 	val = *( (int *) extra ); | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (val) | 
 | 		priv->preamble = 1; | 
 | 	else | 
 | 		priv->preamble = 0; | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 |  | 
 | 	return -EINPROGRESS;		/* Call commit handler */ | 
 | } | 
 |  | 
 | static int orinoco_ioctl_getpreamble(struct net_device *dev, | 
 | 				     struct iw_request_info *info, | 
 | 				     void *wrqu, | 
 | 				     char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int *val = (int *) extra; | 
 |  | 
 | 	if (! priv->has_preamble) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	*val = priv->preamble; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ioctl interface to hermes_read_ltv() | 
 |  * To use with iwpriv, pass the RID as the token argument, e.g. | 
 |  * iwpriv get_rid [0xfc00] | 
 |  * At least Wireless Tools 25 is required to use iwpriv. | 
 |  * For Wireless Tools 25 and 26 append "dummy" are the end. */ | 
 | static int orinoco_ioctl_getrid(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				struct iw_point *data, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int rid = data->flags; | 
 | 	u16 length; | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* It's a "get" function, but we don't want users to access the | 
 | 	 * WEP key and other raw firmware data */ | 
 | 	if (! capable(CAP_NET_ADMIN)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (rid < 0xfc00 || rid > 0xffff) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, | 
 | 			      extra); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), | 
 | 			     MAX_RID_LEN); | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Trigger a scan (look for other cells in the vicinity */ | 
 | static int orinoco_ioctl_setscan(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_param *srq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	hermes_t *hw = &priv->hw; | 
 | 	int err = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Note : you may have realised that, as this is a SET operation, | 
 | 	 * this is privileged and therefore a normal user can't | 
 | 	 * perform scanning. | 
 | 	 * This is not an error, while the device perform scanning, | 
 | 	 * traffic doesn't flow, so it's a perfect DoS... | 
 | 	 * Jean II */ | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* Scanning with port 0 disabled would fail */ | 
 | 	if (!netif_running(dev)) { | 
 | 		err = -ENETDOWN; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* In monitor mode, the scan results are always empty. | 
 | 	 * Probe responses are passed to the driver as received | 
 | 	 * frames and could be processed in software. */ | 
 | 	if (priv->iw_mode == IW_MODE_MONITOR) { | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Note : because we don't lock out the irq handler, the way | 
 | 	 * we access scan variables in priv is critical. | 
 | 	 *	o scan_inprogress : not touched by irq handler | 
 | 	 *	o scan_mode : not touched by irq handler | 
 | 	 *	o scan_result : irq is strict producer, non-irq is strict | 
 | 	 *		consumer. | 
 | 	 *	o scan_len : synchronised with scan_result | 
 | 	 * Before modifying anything on those variables, please think hard ! | 
 | 	 * Jean II */ | 
 |  | 
 | 	/* If there is still some left-over scan results, get rid of it */ | 
 | 	if (priv->scan_result != NULL) { | 
 | 		/* What's likely is that a client did crash or was killed | 
 | 		 * between triggering the scan request and reading the | 
 | 		 * results, so we need to reset everything. | 
 | 		 * Some clients that are too slow may suffer from that... | 
 | 		 * Jean II */ | 
 | 		kfree(priv->scan_result); | 
 | 		priv->scan_result = NULL; | 
 | 	} | 
 |  | 
 | 	/* Save flags */ | 
 | 	priv->scan_mode = srq->flags; | 
 |  | 
 | 	/* Always trigger scanning, even if it's in progress. | 
 | 	 * This way, if the info frame get lost, we will recover somewhat | 
 | 	 * gracefully  - Jean II */ | 
 |  | 
 | 	if (priv->has_hostscan) { | 
 | 		switch (priv->firmware_type) { | 
 | 		case FIRMWARE_TYPE_SYMBOL: | 
 | 			err = hermes_write_wordrec(hw, USER_BAP, | 
 | 						   HERMES_RID_CNFHOSTSCAN_SYMBOL, | 
 | 						   HERMES_HOSTSCAN_SYMBOL_ONCE | | 
 | 						   HERMES_HOSTSCAN_SYMBOL_BCAST); | 
 | 			break; | 
 | 		case FIRMWARE_TYPE_INTERSIL: { | 
 | 			__le16 req[3]; | 
 |  | 
 | 			req[0] = cpu_to_le16(0x3fff);	/* All channels */ | 
 | 			req[1] = cpu_to_le16(0x0001);	/* rate 1 Mbps */ | 
 | 			req[2] = 0;			/* Any ESSID */ | 
 | 			err = HERMES_WRITE_RECORD(hw, USER_BAP, | 
 | 						  HERMES_RID_CNFHOSTSCAN, &req); | 
 | 		} | 
 | 		break; | 
 | 		case FIRMWARE_TYPE_AGERE: | 
 | 			err = hermes_write_wordrec(hw, USER_BAP, | 
 | 						   HERMES_RID_CNFSCANSSID_AGERE, | 
 | 						   0);	/* Any ESSID */ | 
 | 			if (err) | 
 | 				break; | 
 |  | 
 | 			err = hermes_inquire(hw, HERMES_INQ_SCAN); | 
 | 			break; | 
 | 		} | 
 | 	} else | 
 | 		err = hermes_inquire(hw, HERMES_INQ_SCAN); | 
 |  | 
 | 	/* One more client */ | 
 | 	if (! err) | 
 | 		priv->scan_inprogress = 1; | 
 |  | 
 |  out: | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Translate scan data returned from the card to a card independant | 
 |  * format that the Wireless Tools will understand - Jean II | 
 |  * Return message length or -errno for fatal errors */ | 
 | static inline int orinoco_translate_scan(struct net_device *dev, | 
 | 					 char *buffer, | 
 | 					 char *scan, | 
 | 					 int scan_len) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int			offset;		/* In the scan data */ | 
 | 	union hermes_scan_info *atom; | 
 | 	int			atom_len; | 
 | 	u16			capabilities; | 
 | 	u16			channel; | 
 | 	struct iw_event		iwe;		/* Temporary buffer */ | 
 | 	char *			current_ev = buffer; | 
 | 	char *			end_buf = buffer + IW_SCAN_MAX_DATA; | 
 |  | 
 | 	switch (priv->firmware_type) { | 
 | 	case FIRMWARE_TYPE_AGERE: | 
 | 		atom_len = sizeof(struct agere_scan_apinfo); | 
 |  		offset = 0; | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_SYMBOL: | 
 | 		/* Lack of documentation necessitates this hack. | 
 | 		 * Different firmwares have 68 or 76 byte long atoms. | 
 | 		 * We try modulo first.  If the length divides by both, | 
 | 		 * we check what would be the channel in the second | 
 | 		 * frame for a 68-byte atom.  76-byte atoms have 0 there. | 
 | 		 * Valid channel cannot be 0.  */ | 
 | 		if (scan_len % 76) | 
 | 			atom_len = 68; | 
 | 		else if (scan_len % 68) | 
 | 			atom_len = 76; | 
 | 		else if (scan_len >= 1292 && scan[68] == 0) | 
 | 			atom_len = 76; | 
 | 		else | 
 | 			atom_len = 68; | 
 | 		offset = 0; | 
 | 		break; | 
 | 	case FIRMWARE_TYPE_INTERSIL: | 
 | 		offset = 4; | 
 | 		if (priv->has_hostscan) { | 
 | 			atom_len = le16_to_cpup((__le16 *)scan); | 
 | 			/* Sanity check for atom_len */ | 
 | 			if (atom_len < sizeof(struct prism2_scan_apinfo)) { | 
 | 				printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n", | 
 | 				dev->name, atom_len); | 
 | 				return -EIO; | 
 | 			} | 
 | 		} else | 
 | 			atom_len = offsetof(struct prism2_scan_apinfo, atim); | 
 | 		break; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	/* Check that we got an whole number of atoms */ | 
 | 	if ((scan_len - offset) % atom_len) { | 
 | 		printk(KERN_ERR "%s: Unexpected scan data length %d, " | 
 | 		       "atom_len %d, offset %d\n", dev->name, scan_len, | 
 | 		       atom_len, offset); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	/* Read the entries one by one */ | 
 | 	for (; offset + atom_len <= scan_len; offset += atom_len) { | 
 | 		/* Get next atom */ | 
 | 		atom = (union hermes_scan_info *) (scan + offset); | 
 |  | 
 | 		/* First entry *MUST* be the AP MAC address */ | 
 | 		iwe.cmd = SIOCGIWAP; | 
 | 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 		memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN); | 
 | 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); | 
 |  | 
 | 		/* Other entries will be displayed in the order we give them */ | 
 |  | 
 | 		/* Add the ESSID */ | 
 | 		iwe.u.data.length = le16_to_cpu(atom->a.essid_len); | 
 | 		if (iwe.u.data.length > 32) | 
 | 			iwe.u.data.length = 32; | 
 | 		iwe.cmd = SIOCGIWESSID; | 
 | 		iwe.u.data.flags = 1; | 
 | 		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); | 
 |  | 
 | 		/* Add mode */ | 
 | 		iwe.cmd = SIOCGIWMODE; | 
 | 		capabilities = le16_to_cpu(atom->a.capabilities); | 
 | 		if (capabilities & 0x3) { | 
 | 			if (capabilities & 0x1) | 
 | 				iwe.u.mode = IW_MODE_MASTER; | 
 | 			else | 
 | 				iwe.u.mode = IW_MODE_ADHOC; | 
 | 			current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); | 
 | 		} | 
 |  | 
 | 		channel = atom->s.channel; | 
 | 		if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) { | 
 | 			/* Add frequency */ | 
 | 			iwe.cmd = SIOCGIWFREQ; | 
 | 			iwe.u.freq.m = channel_frequency[channel-1] * 100000; | 
 | 			iwe.u.freq.e = 1; | 
 | 			current_ev = iwe_stream_add_event(current_ev, end_buf, | 
 | 							  &iwe, IW_EV_FREQ_LEN); | 
 | 		} | 
 |  | 
 | 		/* Add quality statistics */ | 
 | 		iwe.cmd = IWEVQUAL; | 
 | 		iwe.u.qual.updated = 0x10;	/* no link quality */ | 
 | 		iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95; | 
 | 		iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95; | 
 | 		/* Wireless tools prior to 27.pre22 will show link quality | 
 | 		 * anyway, so we provide a reasonable value. */ | 
 | 		if (iwe.u.qual.level > iwe.u.qual.noise) | 
 | 			iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; | 
 | 		else | 
 | 			iwe.u.qual.qual = 0; | 
 | 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); | 
 |  | 
 | 		/* Add encryption capability */ | 
 | 		iwe.cmd = SIOCGIWENCODE; | 
 | 		if (capabilities & 0x10) | 
 | 			iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
 | 		else | 
 | 			iwe.u.data.flags = IW_ENCODE_DISABLED; | 
 | 		iwe.u.data.length = 0; | 
 | 		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); | 
 |  | 
 | 		/* Bit rate is not available in Lucent/Agere firmwares */ | 
 | 		if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { | 
 | 			char *	current_val = current_ev + IW_EV_LCP_LEN; | 
 | 			int	i; | 
 | 			int	step; | 
 |  | 
 | 			if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) | 
 | 				step = 2; | 
 | 			else | 
 | 				step = 1; | 
 |  | 
 | 			iwe.cmd = SIOCGIWRATE; | 
 | 			/* Those two flags are ignored... */ | 
 | 			iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
 | 			/* Max 10 values */ | 
 | 			for (i = 0; i < 10; i += step) { | 
 | 				/* NULL terminated */ | 
 | 				if (atom->p.rates[i] == 0x0) | 
 | 					break; | 
 | 				/* Bit rate given in 500 kb/s units (+ 0x80) */ | 
 | 				iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000); | 
 | 				current_val = iwe_stream_add_value(current_ev, current_val, | 
 | 								   end_buf, &iwe, | 
 | 								   IW_EV_PARAM_LEN); | 
 | 			} | 
 | 			/* Check if we added any event */ | 
 | 			if ((current_val - current_ev) > IW_EV_LCP_LEN) | 
 | 				current_ev = current_val; | 
 | 		} | 
 |  | 
 | 		/* The other data in the scan result are not really | 
 | 		 * interesting, so for now drop it - Jean II */ | 
 | 	} | 
 | 	return current_ev - buffer; | 
 | } | 
 |  | 
 | /* Return results of a scan */ | 
 | static int orinoco_ioctl_getscan(struct net_device *dev, | 
 | 				 struct iw_request_info *info, | 
 | 				 struct iw_point *srq, | 
 | 				 char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	int err = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* If no results yet, ask to try again later */ | 
 | 	if (priv->scan_result == NULL) { | 
 | 		if (priv->scan_inprogress) | 
 | 			/* Important note : we don't want to block the caller | 
 | 			 * until results are ready for various reasons. | 
 | 			 * First, managing wait queues is complex and racy. | 
 | 			 * Second, we grab some rtnetlink lock before comming | 
 | 			 * here (in dev_ioctl()). | 
 | 			 * Third, we generate an Wireless Event, so the | 
 | 			 * caller can wait itself on that - Jean II */ | 
 | 			err = -EAGAIN; | 
 | 		else | 
 | 			/* Client error, no scan results... | 
 | 			 * The caller need to restart the scan. */ | 
 | 			err = -ENODATA; | 
 | 	} else { | 
 | 		/* We have some results to push back to user space */ | 
 |  | 
 | 		/* Translate to WE format */ | 
 | 		int ret = orinoco_translate_scan(dev, extra, | 
 | 						 priv->scan_result, | 
 | 						 priv->scan_len); | 
 |  | 
 | 		if (ret < 0) { | 
 | 			err = ret; | 
 | 			kfree(priv->scan_result); | 
 | 			priv->scan_result = NULL; | 
 | 		} else { | 
 | 			srq->length = ret; | 
 |  | 
 | 			/* Return flags */ | 
 | 			srq->flags = (__u16) priv->scan_mode; | 
 |  | 
 | 			/* In any case, Scan results will be cleaned up in the | 
 | 			 * reset function and when exiting the driver. | 
 | 			 * The person triggering the scanning may never come to | 
 | 			 * pick the results, so we need to do it in those places. | 
 | 			 * Jean II */ | 
 |  | 
 | #ifdef SCAN_SINGLE_READ | 
 | 			/* If you enable this option, only one client (the first | 
 | 			 * one) will be able to read the result (and only one | 
 | 			 * time). If there is multiple concurent clients that | 
 | 			 * want to read scan results, this behavior is not | 
 | 			 * advisable - Jean II */ | 
 | 			kfree(priv->scan_result); | 
 | 			priv->scan_result = NULL; | 
 | #endif /* SCAN_SINGLE_READ */ | 
 | 			/* Here, if too much time has elapsed since last scan, | 
 | 			 * we may want to clean up scan results... - Jean II */ | 
 | 		} | 
 |  | 
 | 		/* Scan is no longer in progress */ | 
 | 		priv->scan_inprogress = 0; | 
 | 	} | 
 | 	   | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Commit handler, called after set operations */ | 
 | static int orinoco_ioctl_commit(struct net_device *dev, | 
 | 				struct iw_request_info *info, | 
 | 				void *wrqu, | 
 | 				char *extra) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 | 	struct hermes *hw = &priv->hw; | 
 | 	unsigned long flags; | 
 | 	int err = 0; | 
 |  | 
 | 	if (!priv->open) | 
 | 		return 0; | 
 |  | 
 | 	if (priv->broken_disableport) { | 
 | 		orinoco_reset(dev); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (orinoco_lock(priv, &flags) != 0) | 
 | 		return err; | 
 |  | 
 | 	err = hermes_disable_port(hw, 0); | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: Unable to disable port " | 
 | 		       "while reconfiguring card\n", dev->name); | 
 | 		priv->broken_disableport = 1; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	err = __orinoco_program_rids(dev); | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: Unable to reconfigure card\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	err = hermes_enable_port(hw, 0); | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", | 
 | 		       dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 |  out: | 
 | 	if (err) { | 
 | 		printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); | 
 | 		schedule_work(&priv->reset_work); | 
 | 		err = 0; | 
 | 	} | 
 |  | 
 | 	orinoco_unlock(priv, &flags); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct iw_priv_args orinoco_privtab[] = { | 
 | 	{ SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  0, "set_port3" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  "get_port3" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  0, "set_preamble" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  "get_preamble" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  0, "set_ibssport" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	  "get_ibssport" }, | 
 | 	{ SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, | 
 | 	  "get_rid" }, | 
 | }; | 
 |  | 
 |  | 
 | /* | 
 |  * Structures to export the Wireless Handlers | 
 |  */ | 
 |  | 
 | static const iw_handler	orinoco_handler[] = { | 
 | 	[SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, | 
 | 	[SIOCGIWNAME  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, | 
 | 	[SIOCSIWFREQ  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, | 
 | 	[SIOCGIWFREQ  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, | 
 | 	[SIOCSIWMODE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, | 
 | 	[SIOCGIWMODE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, | 
 | 	[SIOCSIWSENS  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, | 
 | 	[SIOCGIWSENS  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, | 
 | 	[SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, | 
 | 	[SIOCSIWSPY   -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, | 
 | 	[SIOCGIWSPY   -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, | 
 | 	[SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, | 
 | 	[SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, | 
 | 	[SIOCSIWAP    -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, | 
 | 	[SIOCGIWAP    -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, | 
 | 	[SIOCSIWSCAN  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, | 
 | 	[SIOCGIWSCAN  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, | 
 | 	[SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, | 
 | 	[SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, | 
 | 	[SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, | 
 | 	[SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, | 
 | 	[SIOCSIWRATE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, | 
 | 	[SIOCGIWRATE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, | 
 | 	[SIOCSIWRTS   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, | 
 | 	[SIOCGIWRTS   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, | 
 | 	[SIOCSIWFRAG  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, | 
 | 	[SIOCGIWFRAG  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, | 
 | 	[SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, | 
 | 	[SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, | 
 | 	[SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, | 
 | 	[SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, | 
 | 	[SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, | 
 | }; | 
 |  | 
 |  | 
 | /* | 
 |   Added typecasting since we no longer use iwreq_data -- Moustafa | 
 |  */ | 
 | static const iw_handler	orinoco_private_handler[] = { | 
 | 	[0] = (iw_handler) orinoco_ioctl_reset, | 
 | 	[1] = (iw_handler) orinoco_ioctl_reset, | 
 | 	[2] = (iw_handler) orinoco_ioctl_setport3, | 
 | 	[3] = (iw_handler) orinoco_ioctl_getport3, | 
 | 	[4] = (iw_handler) orinoco_ioctl_setpreamble, | 
 | 	[5] = (iw_handler) orinoco_ioctl_getpreamble, | 
 | 	[6] = (iw_handler) orinoco_ioctl_setibssport, | 
 | 	[7] = (iw_handler) orinoco_ioctl_getibssport, | 
 | 	[9] = (iw_handler) orinoco_ioctl_getrid, | 
 | }; | 
 |  | 
 | static const struct iw_handler_def orinoco_handler_def = { | 
 | 	.num_standard = ARRAY_SIZE(orinoco_handler), | 
 | 	.num_private = ARRAY_SIZE(orinoco_private_handler), | 
 | 	.num_private_args = ARRAY_SIZE(orinoco_privtab), | 
 | 	.standard = orinoco_handler, | 
 | 	.private = orinoco_private_handler, | 
 | 	.private_args = orinoco_privtab, | 
 | 	.get_wireless_stats = orinoco_get_wireless_stats, | 
 | }; | 
 |  | 
 | static void orinoco_get_drvinfo(struct net_device *dev, | 
 | 				struct ethtool_drvinfo *info) | 
 | { | 
 | 	struct orinoco_private *priv = netdev_priv(dev); | 
 |  | 
 | 	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); | 
 | 	strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); | 
 | 	strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); | 
 | 	if (dev->class_dev.dev) | 
 | 		strncpy(info->bus_info, dev->class_dev.dev->bus_id, | 
 | 			sizeof(info->bus_info) - 1); | 
 | 	else | 
 | 		snprintf(info->bus_info, sizeof(info->bus_info) - 1, | 
 | 			 "PCMCIA %p", priv->hw.iobase); | 
 | } | 
 |  | 
 | static struct ethtool_ops orinoco_ethtool_ops = { | 
 | 	.get_drvinfo = orinoco_get_drvinfo, | 
 | 	.get_link = ethtool_op_get_link, | 
 | }; | 
 |  | 
 | /********************************************************************/ | 
 | /* Module initialization                                            */ | 
 | /********************************************************************/ | 
 |  | 
 | EXPORT_SYMBOL(alloc_orinocodev); | 
 | EXPORT_SYMBOL(free_orinocodev); | 
 |  | 
 | EXPORT_SYMBOL(__orinoco_up); | 
 | EXPORT_SYMBOL(__orinoco_down); | 
 | EXPORT_SYMBOL(orinoco_reinit_firmware); | 
 |  | 
 | EXPORT_SYMBOL(orinoco_interrupt); | 
 |  | 
 | /* Can't be declared "const" or the whole __initdata section will | 
 |  * become const */ | 
 | static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION | 
 | 	" (David Gibson <hermes@gibson.dropbear.id.au>, " | 
 | 	"Pavel Roskin <proski@gnu.org>, et al)"; | 
 |  | 
 | static int __init init_orinoco(void) | 
 | { | 
 | 	printk(KERN_DEBUG "%s\n", version); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit exit_orinoco(void) | 
 | { | 
 | } | 
 |  | 
 | module_init(init_orinoco); | 
 | module_exit(exit_orinoco); |