arch/arm/mach-mx2/pcm038.c - android_kernel_oneplus_msm8996 - Gitiles

 /*
  * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */

 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>

 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux.h>
 #ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
 #endif
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>

 #include "devices.h"

 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
  */

 static struct platdata_mtd_ram pcm038_sram_data = {
 	.bankwidth = 2,
 };

 static struct resource pcm038_sram_resource = {
 	.start = CS1_BASE_ADDR,
 	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };

 static struct platform_device pcm038_sram_mtd_device = {
 	.name = "mtd-ram",
 	.id = 0,
 	.dev = {
 		.platform_data = &pcm038_sram_data,
 	},
 	.num_resources = 1,
 	.resource = &pcm038_sram_resource,
 };

 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
  * 16 bit width
  */
 static struct physmap_flash_data pcm038_flash_data = {
 	.width = 2,
 };

 static struct resource pcm038_flash_resource = {
 	.start = 0xc0000000,
 	.end   = 0xc1ffffff,
 	.flags = IORESOURCE_MEM,
 };

 static struct platform_device pcm038_nor_mtd_device = {
 	.name = "physmap-flash",
 	.id = 0,
 	.dev = {
 		.platform_data = &pcm038_flash_data,
 	},
 	.num_resources = 1,
 	.resource = &pcm038_flash_resource,
 };

 static int mxc_uart0_pins[] = {
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
 	PE14_PF_UART1_CTS,
 	PE15_PF_UART1_RTS
 };

 static int uart_mxc_port0_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
 			ARRAY_SIZE(mxc_uart0_pins), "UART0");
 }

 static int uart_mxc_port0_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
 			ARRAY_SIZE(mxc_uart0_pins));
 	return 0;
 }

 static int mxc_uart1_pins[] = {
 	PE3_PF_UART2_CTS,
 	PE4_PF_UART2_RTS,
 	PE6_PF_UART2_TXD,
 	PE7_PF_UART2_RXD
 };

 static int uart_mxc_port1_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }

 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins));
 	return 0;
 }

 static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
 				PE9_PF_UART3_RXD,
 				PE10_PF_UART3_CTS,
 				PE11_PF_UART3_RTS };

 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
 			ARRAY_SIZE(mxc_uart2_pins), "UART2");
 }

 static int uart_mxc_port2_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
 			ARRAY_SIZE(mxc_uart2_pins));
 	return 0;
 }

 static struct imxuart_platform_data uart_pdata[] = {
 	{
 		.init = uart_mxc_port0_init,
 		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.init = uart_mxc_port1_init,
 		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.init = uart_mxc_port2_init,
 		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };

 static int mxc_fec_pins[] = {
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
 	PD2_AIN_FEC_TXD2,
 	PD3_AIN_FEC_TXD3,
 	PD4_AOUT_FEC_RX_ER,
 	PD5_AOUT_FEC_RXD1,
 	PD6_AOUT_FEC_RXD2,
 	PD7_AOUT_FEC_RXD3,
 	PD8_AF_FEC_MDIO,
 	PD9_AIN_FEC_MDC,
 	PD10_AOUT_FEC_CRS,
 	PD11_AOUT_FEC_TX_CLK,
 	PD12_AOUT_FEC_RXD0,
 	PD13_AOUT_FEC_RX_DV,
 	PD14_AOUT_FEC_RX_CLK,
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN
 };

 static void gpio_fec_active(void)
 {
 	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
 			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }

 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
 };

 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
 	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
 };

 /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
 	__raw_writel(0x0000d843, CSCR_U(1));
 	__raw_writel(0x22252521, CSCR_L(1));
 	__raw_writel(0x22220a00, CSCR_A(1));
 }

 #ifdef CONFIG_I2C_IMX
 static int mxc_i2c1_pins[] = {
 	PC5_PF_I2C2_SDA,
 	PC6_PF_I2C2_SCL
 };

 static int pcm038_i2c_1_init(struct device *dev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
 			"I2C1");
 }

 static void pcm038_i2c_1_exit(struct device *dev)
 {
 	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
 }

 static struct imxi2c_platform_data pcm038_i2c_1_data = {
 	.bitrate = 100000,
 	.init = pcm038_i2c_1_init,
 	.exit = pcm038_i2c_1_exit,
 };

 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };

 static struct i2c_board_info pcm038_i2c_devices[] = {
 	[0] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	},
 	[1] = {
 		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
 		.type = "pcf8563"
 	},
 	[2] = {
 		I2C_BOARD_INFO("lm75", 0x4a),
 		.type = "lm75"
 	}
 };
 #endif

 static void __init pcm038_init(void)
 {
 	gpio_fec_active();
 	pcm038_init_sram();

 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);

 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);

 #ifdef CONFIG_I2C_IMX
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));

 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 #endif

 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

 #ifdef CONFIG_MACH_PCM970_BASEBOARD
 	pcm970_baseboard_init();
 #endif
 }

 static void __init pcm038_timer_init(void)
 {
 	mx27_clocks_init(26000000);
 }

 static struct sys_timer pcm038_timer = {
 	.init = pcm038_timer_init,
 };

 MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.phys_io        = AIPI_BASE_ADDR,
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
	/*
	* Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
	* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	* MA 02110-1301, USA.
	*/

	#include <linux/platform_device.h>
	#include <linux/mtd/physmap.h>
	#include <linux/mtd/plat-ram.h>
	#include <linux/io.h>
	#include <linux/i2c.h>
	#include <linux/i2c/at24.h>

	#include <asm/mach/arch.h>
	#include <asm/mach-types.h>
	#include <mach/common.h>
	#include <mach/hardware.h>
	#include <mach/iomux.h>
	#ifdef CONFIG_I2C_IMX
	#include <mach/i2c.h>
	#endif
	#include <asm/mach/time.h>
	#include <mach/imx-uart.h>
	#include <mach/board-pcm038.h>
	#include <mach/mxc_nand.h>

	#include "devices.h"

	/*
	* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
	* 16 bit width
	*/

	static struct platdata_mtd_ram pcm038_sram_data = {
	.bankwidth = 2,
	};

	static struct resource pcm038_sram_resource = {
	.start = CS1_BASE_ADDR,
	.end = CS1_BASE_ADDR + 512 * 1024 - 1,
	.flags = IORESOURCE_MEM,
	};

	static struct platform_device pcm038_sram_mtd_device = {
	.name = "mtd-ram",
	.id = 0,
	.dev = {
	.platform_data = &pcm038_sram_data,
	},
	.num_resources = 1,
	.resource = &pcm038_sram_resource,
	};

	/*
	* Phytec's phyCORE-i.MX27 comes with 32MiB flash,
	* 16 bit width
	*/
	static struct physmap_flash_data pcm038_flash_data = {
	.width = 2,
	};

	static struct resource pcm038_flash_resource = {
	.start = 0xc0000000,
	.end = 0xc1ffffff,
	.flags = IORESOURCE_MEM,
	};

	static struct platform_device pcm038_nor_mtd_device = {
	.name = "physmap-flash",
	.id = 0,
	.dev = {
	.platform_data = &pcm038_flash_data,
	},
	.num_resources = 1,
	.resource = &pcm038_flash_resource,
	};

	static int mxc_uart0_pins[] = {
	PE12_PF_UART1_TXD,
	PE13_PF_UART1_RXD,
	PE14_PF_UART1_CTS,
	PE15_PF_UART1_RTS
	};

	static int uart_mxc_port0_init(struct platform_device *pdev)
	{
	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
	ARRAY_SIZE(mxc_uart0_pins), "UART0");
	}

	static int uart_mxc_port0_exit(struct platform_device *pdev)
	{
	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
	ARRAY_SIZE(mxc_uart0_pins));
	return 0;
	}

	static int mxc_uart1_pins[] = {
	PE3_PF_UART2_CTS,
	PE4_PF_UART2_RTS,
	PE6_PF_UART2_TXD,
	PE7_PF_UART2_RXD
	};

	static int uart_mxc_port1_init(struct platform_device *pdev)
	{
	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
	ARRAY_SIZE(mxc_uart1_pins), "UART1");
	}

	static int uart_mxc_port1_exit(struct platform_device *pdev)
	{
	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
	ARRAY_SIZE(mxc_uart1_pins));
	return 0;
	}

	static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
	PE9_PF_UART3_RXD,
	PE10_PF_UART3_CTS,
	PE11_PF_UART3_RTS };

	static int uart_mxc_port2_init(struct platform_device *pdev)
	{
	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
	ARRAY_SIZE(mxc_uart2_pins), "UART2");
	}

	static int uart_mxc_port2_exit(struct platform_device *pdev)
	{
	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
	ARRAY_SIZE(mxc_uart2_pins));
	return 0;
	}

	static struct imxuart_platform_data uart_pdata[] = {
	{
	.init = uart_mxc_port0_init,
	.exit = uart_mxc_port0_exit,
	.flags = IMXUART_HAVE_RTSCTS,
	}, {
	.init = uart_mxc_port1_init,
	.exit = uart_mxc_port1_exit,
	.flags = IMXUART_HAVE_RTSCTS,
	}, {
	.init = uart_mxc_port2_init,
	.exit = uart_mxc_port2_exit,
	.flags = IMXUART_HAVE_RTSCTS,
	},
	};

	static int mxc_fec_pins[] = {
	PD0_AIN_FEC_TXD0,
	PD1_AIN_FEC_TXD1,
	PD2_AIN_FEC_TXD2,
	PD3_AIN_FEC_TXD3,
	PD4_AOUT_FEC_RX_ER,
	PD5_AOUT_FEC_RXD1,
	PD6_AOUT_FEC_RXD2,
	PD7_AOUT_FEC_RXD3,
	PD8_AF_FEC_MDIO,
	PD9_AIN_FEC_MDC,
	PD10_AOUT_FEC_CRS,
	PD11_AOUT_FEC_TX_CLK,
	PD12_AOUT_FEC_RXD0,
	PD13_AOUT_FEC_RX_DV,
	PD14_AOUT_FEC_RX_CLK,
	PD15_AOUT_FEC_COL,
	PD16_AIN_FEC_TX_ER,
	PF23_AIN_FEC_TX_EN
	};

	static void gpio_fec_active(void)
	{
	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
	ARRAY_SIZE(mxc_fec_pins), "FEC");
	}

	static struct mxc_nand_platform_data pcm038_nand_board_info = {
	.width = 1,
	.hw_ecc = 1,
	};

	static struct platform_device *platform_devices[] __initdata = {
	&pcm038_nor_mtd_device,
	&mxc_w1_master_device,
	&mxc_fec_device,
	&pcm038_sram_mtd_device,
	};

	/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
	* setup other stuffs to access the sram. */
	static void __init pcm038_init_sram(void)
	{
	__raw_writel(0x0000d843, CSCR_U(1));
	__raw_writel(0x22252521, CSCR_L(1));
	__raw_writel(0x22220a00, CSCR_A(1));
	}

	#ifdef CONFIG_I2C_IMX
	static int mxc_i2c1_pins[] = {
	PC5_PF_I2C2_SDA,
	PC6_PF_I2C2_SCL
	};

	static int pcm038_i2c_1_init(struct device *dev)
	{
	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
	"I2C1");
	}

	static void pcm038_i2c_1_exit(struct device *dev)
	{
	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
	}

	static struct imxi2c_platform_data pcm038_i2c_1_data = {
	.bitrate = 100000,
	.init = pcm038_i2c_1_init,
	.exit = pcm038_i2c_1_exit,
	};

	static struct at24_platform_data board_eeprom = {
	.byte_len = 4096,
	.page_size = 32,
	.flags = AT24_FLAG_ADDR16,
	};

	static struct i2c_board_info pcm038_i2c_devices[] = {
	[0] = {
	I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
	.platform_data = &board_eeprom,
	},
	[1] = {
	I2C_BOARD_INFO("rtc-pcf8563", 0x51),
	.type = "pcf8563"
	},
	[2] = {
	I2C_BOARD_INFO("lm75", 0x4a),
	.type = "lm75"
	}
	};
	#endif

	static void __init pcm038_init(void)
	{
	gpio_fec_active();
	pcm038_init_sram();

	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);

	mxc_gpio_mode(PE16_AF_OWIRE);
	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);

	#ifdef CONFIG_I2C_IMX
	/* only the i2c master 1 is used on this CPU card */
	i2c_register_board_info(1, pcm038_i2c_devices,
	ARRAY_SIZE(pcm038_i2c_devices));

	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
	#endif

	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

	#ifdef CONFIG_MACH_PCM970_BASEBOARD
	pcm970_baseboard_init();
	#endif
	}

	static void __init pcm038_timer_init(void)
	{
	mx27_clocks_init(26000000);
	}

	static struct sys_timer pcm038_timer = {
	.init = pcm038_timer_init,
	};

	MACHINE_START(PCM038, "phyCORE-i.MX27")
	.phys_io = AIPI_BASE_ADDR,
	.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
	.boot_params = PHYS_OFFSET + 0x100,
	.map_io = mxc_map_io,
	.init_irq = mxc_init_irq,
	.init_machine = pcm038_init,
	.timer = &pcm038_timer,
	MACHINE_END