| /* |
| * linux/arch/arm/mm/proc-v7.S |
| * |
| * Copyright (C) 2001 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This is the "shell" of the ARMv7 processor support. |
| */ |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <asm/assembler.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/hwcap.h> |
| #include <asm/pgtable-hwdef.h> |
| #include <asm/pgtable.h> |
| |
| #include "proc-macros.S" |
| |
| #define TTB_C (1 << 0) |
| #define TTB_S (1 << 1) |
| #define TTB_RGN_NC (0 << 3) |
| #define TTB_RGN_OC_WBWA (1 << 3) |
| #define TTB_RGN_OC_WT (2 << 3) |
| #define TTB_RGN_OC_WB (3 << 3) |
| |
| #ifndef CONFIG_SMP |
| #define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB |
| #else |
| #define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA |
| #endif |
| |
| ENTRY(cpu_v7_proc_init) |
| mov pc, lr |
| ENDPROC(cpu_v7_proc_init) |
| |
| ENTRY(cpu_v7_proc_fin) |
| mov pc, lr |
| ENDPROC(cpu_v7_proc_fin) |
| |
| /* |
| * cpu_v7_reset(loc) |
| * |
| * Perform a soft reset of the system. Put the CPU into the |
| * same state as it would be if it had been reset, and branch |
| * to what would be the reset vector. |
| * |
| * - loc - location to jump to for soft reset |
| * |
| * It is assumed that: |
| */ |
| .align 5 |
| ENTRY(cpu_v7_reset) |
| mov pc, r0 |
| ENDPROC(cpu_v7_reset) |
| |
| /* |
| * cpu_v7_do_idle() |
| * |
| * Idle the processor (eg, wait for interrupt). |
| * |
| * IRQs are already disabled. |
| */ |
| ENTRY(cpu_v7_do_idle) |
| dsb @ WFI may enter a low-power mode |
| wfi |
| mov pc, lr |
| ENDPROC(cpu_v7_do_idle) |
| |
| ENTRY(cpu_v7_dcache_clean_area) |
| #ifndef TLB_CAN_READ_FROM_L1_CACHE |
| dcache_line_size r2, r3 |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| add r0, r0, r2 |
| subs r1, r1, r2 |
| bhi 1b |
| dsb |
| #endif |
| mov pc, lr |
| ENDPROC(cpu_v7_dcache_clean_area) |
| |
| /* |
| * cpu_v7_switch_mm(pgd_phys, tsk) |
| * |
| * Set the translation table base pointer to be pgd_phys |
| * |
| * - pgd_phys - physical address of new TTB |
| * |
| * It is assumed that: |
| * - we are not using split page tables |
| */ |
| ENTRY(cpu_v7_switch_mm) |
| #ifdef CONFIG_MMU |
| mov r2, #0 |
| ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id |
| orr r0, r0, #TTB_FLAGS |
| #ifdef CONFIG_ARM_ERRATA_430973 |
| mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB |
| #endif |
| mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID |
| isb |
| 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 |
| isb |
| mcr p15, 0, r1, c13, c0, 1 @ set context ID |
| isb |
| #endif |
| mov pc, lr |
| ENDPROC(cpu_v7_switch_mm) |
| |
| /* |
| * cpu_v7_set_pte_ext(ptep, pte) |
| * |
| * Set a level 2 translation table entry. |
| * |
| * - ptep - pointer to level 2 translation table entry |
| * (hardware version is stored at -1024 bytes) |
| * - pte - PTE value to store |
| * - ext - value for extended PTE bits |
| */ |
| ENTRY(cpu_v7_set_pte_ext) |
| #ifdef CONFIG_MMU |
| str r1, [r0], #-2048 @ linux version |
| |
| bic r3, r1, #0x000003f0 |
| bic r3, r3, #PTE_TYPE_MASK |
| orr r3, r3, r2 |
| orr r3, r3, #PTE_EXT_AP0 | 2 |
| |
| tst r1, #1 << 4 |
| orrne r3, r3, #PTE_EXT_TEX(1) |
| |
| tst r1, #L_PTE_WRITE |
| tstne r1, #L_PTE_DIRTY |
| orreq r3, r3, #PTE_EXT_APX |
| |
| tst r1, #L_PTE_USER |
| orrne r3, r3, #PTE_EXT_AP1 |
| tstne r3, #PTE_EXT_APX |
| bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 |
| |
| tst r1, #L_PTE_EXEC |
| orreq r3, r3, #PTE_EXT_XN |
| |
| tst r1, #L_PTE_YOUNG |
| tstne r1, #L_PTE_PRESENT |
| moveq r3, #0 |
| |
| str r3, [r0] |
| mcr p15, 0, r0, c7, c10, 1 @ flush_pte |
| #endif |
| mov pc, lr |
| ENDPROC(cpu_v7_set_pte_ext) |
| |
| cpu_v7_name: |
| .ascii "ARMv7 Processor" |
| .align |
| |
| __INIT |
| |
| /* |
| * __v7_setup |
| * |
| * Initialise TLB, Caches, and MMU state ready to switch the MMU |
| * on. Return in r0 the new CP15 C1 control register setting. |
| * |
| * We automatically detect if we have a Harvard cache, and use the |
| * Harvard cache control instructions insead of the unified cache |
| * control instructions. |
| * |
| * This should be able to cover all ARMv7 cores. |
| * |
| * It is assumed that: |
| * - cache type register is implemented |
| */ |
| __v7_setup: |
| #ifdef CONFIG_SMP |
| mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode |
| orr r0, r0, #(0x1 << 6) |
| mcr p15, 0, r0, c1, c0, 1 |
| #endif |
| adr r12, __v7_setup_stack @ the local stack |
| stmia r12, {r0-r5, r7, r9, r11, lr} |
| bl v7_flush_dcache_all |
| ldmia r12, {r0-r5, r7, r9, r11, lr} |
| #ifdef CONFIG_ARM_ERRATA_430973 |
| mrc p15, 0, r10, c1, c0, 1 @ read aux control register |
| orr r10, r10, #(1 << 6) @ set IBE to 1 |
| mcr p15, 0, r10, c1, c0, 1 @ write aux control register |
| #endif |
| #ifdef CONFIG_ARM_ERRATA_458693 |
| mrc p15, 0, r10, c1, c0, 1 @ read aux control register |
| orr r10, r10, #(1 << 5) @ set L1NEON to 1 |
| orr r10, r10, #(1 << 9) @ set PLDNOP to 1 |
| mcr p15, 0, r10, c1, c0, 1 @ write aux control register |
| #endif |
| #ifdef CONFIG_ARM_ERRATA_460075 |
| mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register |
| orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit |
| mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register |
| #endif |
| mov r10, #0 |
| #ifdef HARVARD_CACHE |
| mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate |
| #endif |
| dsb |
| #ifdef CONFIG_MMU |
| mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs |
| mcr p15, 0, r10, c2, c0, 2 @ TTB control register |
| orr r4, r4, #TTB_FLAGS |
| mcr p15, 0, r4, c2, c0, 1 @ load TTB1 |
| mov r10, #0x1f @ domains 0, 1 = manager |
| mcr p15, 0, r10, c3, c0, 0 @ load domain access register |
| #endif |
| ldr r5, =0xff0aa1a8 |
| ldr r6, =0x40e040e0 |
| mcr p15, 0, r5, c10, c2, 0 @ write PRRR |
| mcr p15, 0, r6, c10, c2, 1 @ write NMRR |
| adr r5, v7_crval |
| ldmia r5, {r5, r6} |
| mrc p15, 0, r0, c1, c0, 0 @ read control register |
| bic r0, r0, r5 @ clear bits them |
| orr r0, r0, r6 @ set them |
| mov pc, lr @ return to head.S:__ret |
| ENDPROC(__v7_setup) |
| |
| /* AT |
| * TFR EV X F I D LR |
| * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM |
| * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced |
| * 1 0 110 0011 1.00 .111 1101 < we want |
| */ |
| .type v7_crval, #object |
| v7_crval: |
| crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c |
| |
| __v7_setup_stack: |
| .space 4 * 11 @ 11 registers |
| |
| .type v7_processor_functions, #object |
| ENTRY(v7_processor_functions) |
| .word v7_early_abort |
| .word pabort_ifar |
| .word cpu_v7_proc_init |
| .word cpu_v7_proc_fin |
| .word cpu_v7_reset |
| .word cpu_v7_do_idle |
| .word cpu_v7_dcache_clean_area |
| .word cpu_v7_switch_mm |
| .word cpu_v7_set_pte_ext |
| .size v7_processor_functions, . - v7_processor_functions |
| |
| .type cpu_arch_name, #object |
| cpu_arch_name: |
| .asciz "armv7" |
| .size cpu_arch_name, . - cpu_arch_name |
| |
| .type cpu_elf_name, #object |
| cpu_elf_name: |
| .asciz "v7" |
| .size cpu_elf_name, . - cpu_elf_name |
| .align |
| |
| .section ".proc.info.init", #alloc, #execinstr |
| |
| /* |
| * Match any ARMv7 processor core. |
| */ |
| .type __v7_proc_info, #object |
| __v7_proc_info: |
| .long 0x000f0000 @ Required ID value |
| .long 0x000f0000 @ Mask for ID |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_XN | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __v7_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_v7_name |
| .long v7_processor_functions |
| .long v7wbi_tlb_fns |
| .long v6_user_fns |
| .long v7_cache_fns |
| .size __v7_proc_info, . - __v7_proc_info |