|  | /* | 
|  | * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery) | 
|  | * | 
|  | * Author: Dale Farnsworth <dale@farnsworth.org> | 
|  | * | 
|  | * 2007 (c) MontaVista, Software, Inc.  This file is licensed under | 
|  | * the terms of the GNU General Public License version 2.  This program | 
|  | * is licensed "as is" without any warranty of any kind, whether express | 
|  | * or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  | #include <asm/prom.h> | 
|  | #include <asm/pci-bridge.h> | 
|  |  | 
|  | #define PCI_HEADER_TYPE_INVALID		0x7f	/* Invalid PCI header type */ | 
|  |  | 
|  | #ifdef CONFIG_SYSFS | 
|  | /* 32-bit hex or dec stringified number + '\n' */ | 
|  | #define MV64X60_VAL_LEN_MAX		11 | 
|  | #define MV64X60_PCICFG_CPCI_HOTSWAP	0x68 | 
|  |  | 
|  | static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, | 
|  | struct bin_attribute *attr, char *buf, | 
|  | loff_t off, size_t count) | 
|  | { | 
|  | struct pci_dev *phb; | 
|  | u32 v; | 
|  |  | 
|  | if (off > 0) | 
|  | return 0; | 
|  | if (count < MV64X60_VAL_LEN_MAX) | 
|  | return -EINVAL; | 
|  |  | 
|  | phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); | 
|  | if (!phb) | 
|  | return -ENODEV; | 
|  | pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v); | 
|  | pci_dev_put(phb); | 
|  |  | 
|  | return sprintf(buf, "0x%08x\n", v); | 
|  | } | 
|  |  | 
|  | static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, | 
|  | struct bin_attribute *attr, char *buf, | 
|  | loff_t off, size_t count) | 
|  | { | 
|  | struct pci_dev *phb; | 
|  | u32 v; | 
|  |  | 
|  | if (off > 0) | 
|  | return 0; | 
|  | if (count <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (sscanf(buf, "%i", &v) != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); | 
|  | if (!phb) | 
|  | return -ENODEV; | 
|  | pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v); | 
|  | pci_dev_put(phb); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ | 
|  | .attr = { | 
|  | .name = "hs_reg", | 
|  | .mode = S_IRUGO | S_IWUSR, | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .size  = MV64X60_VAL_LEN_MAX, | 
|  | .read  = mv64x60_hs_reg_read, | 
|  | .write = mv64x60_hs_reg_write, | 
|  | }; | 
|  |  | 
|  | static int __init mv64x60_sysfs_init(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct platform_device *pdev; | 
|  | const unsigned int *prop; | 
|  |  | 
|  | np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); | 
|  | if (!np) | 
|  | return 0; | 
|  |  | 
|  | prop = of_get_property(np, "hs_reg_valid", NULL); | 
|  | of_node_put(np); | 
|  |  | 
|  | pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); | 
|  | if (IS_ERR(pdev)) | 
|  | return PTR_ERR(pdev); | 
|  |  | 
|  | return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr); | 
|  | } | 
|  |  | 
|  | subsys_initcall(mv64x60_sysfs_init); | 
|  |  | 
|  | #endif /* CONFIG_SYSFS */ | 
|  |  | 
|  | static void __init mv64x60_pci_fixup_early(struct pci_dev *dev) | 
|  | { | 
|  | /* | 
|  | * Set the host bridge hdr_type to an invalid value so that | 
|  | * pci_setup_device() will ignore the host bridge. | 
|  | */ | 
|  | dev->hdr_type = PCI_HEADER_TYPE_INVALID; | 
|  | } | 
|  | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360, | 
|  | mv64x60_pci_fixup_early); | 
|  | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460, | 
|  | mv64x60_pci_fixup_early); | 
|  |  | 
|  | static int __init mv64x60_add_bridge(struct device_node *dev) | 
|  | { | 
|  | int len; | 
|  | struct pci_controller *hose; | 
|  | struct resource rsrc; | 
|  | const int *bus_range; | 
|  | int primary; | 
|  |  | 
|  | memset(&rsrc, 0, sizeof(rsrc)); | 
|  |  | 
|  | /* Fetch host bridge registers address */ | 
|  | if (of_address_to_resource(dev, 0, &rsrc)) { | 
|  | printk(KERN_ERR "No PCI reg property in device tree\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* Get bus range if any */ | 
|  | bus_range = of_get_property(dev, "bus-range", &len); | 
|  | if (bus_range == NULL || len < 2 * sizeof(int)) | 
|  | printk(KERN_WARNING "Can't get bus-range for %s, assume" | 
|  | " bus 0\n", dev->full_name); | 
|  |  | 
|  | hose = pcibios_alloc_controller(dev); | 
|  | if (!hose) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hose->first_busno = bus_range ? bus_range[0] : 0; | 
|  | hose->last_busno = bus_range ? bus_range[1] : 0xff; | 
|  |  | 
|  | setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0); | 
|  | hose->self_busno = hose->first_busno; | 
|  |  | 
|  | printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " | 
|  | "Firmware bus number: %d->%d\n", | 
|  | (unsigned long long)rsrc.start, hose->first_busno, | 
|  | hose->last_busno); | 
|  |  | 
|  | /* Interpret the "ranges" property */ | 
|  | /* This also maps the I/O region and sets isa_io/mem_base */ | 
|  | primary = (hose->first_busno == 0); | 
|  | pci_process_bridge_OF_ranges(hose, dev, primary); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __init mv64x60_pci_init(void) | 
|  | { | 
|  | struct device_node *np; | 
|  |  | 
|  | for_each_compatible_node(np, "pci", "marvell,mv64360-pci") | 
|  | mv64x60_add_bridge(np); | 
|  | } |