|  | /* | 
|  | *  arch/arm/common/dmabounce.c | 
|  | * | 
|  | *  Special dma_{map/unmap/dma_sync}_* routines for systems that have | 
|  | *  limited DMA windows. These functions utilize bounce buffers to | 
|  | *  copy data to/from buffers located outside the DMA region. This | 
|  | *  only works for systems in which DMA memory is at the bottom of | 
|  | *  RAM, the remainder of memory is at the top and the DMA memory | 
|  | *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous | 
|  | *  DMA windows will require custom implementations that reserve memory | 
|  | *  areas at early bootup. | 
|  | * | 
|  | *  Original version by Brad Parker (brad@heeltoe.com) | 
|  | *  Re-written by Christopher Hoover <ch@murgatroid.com> | 
|  | *  Made generic by Deepak Saxena <dsaxena@plexity.net> | 
|  | * | 
|  | *  Copyright (C) 2002 Hewlett Packard Company. | 
|  | *  Copyright (C) 2004 MontaVista Software, Inc. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or | 
|  | *  modify it under the terms of the GNU General Public License | 
|  | *  version 2 as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/page-flags.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/dmapool.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/scatterlist.h> | 
|  |  | 
|  | #include <asm/cacheflush.h> | 
|  |  | 
|  | #undef STATS | 
|  |  | 
|  | #ifdef STATS | 
|  | #define DO_STATS(X) do { X ; } while (0) | 
|  | #else | 
|  | #define DO_STATS(X) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | struct safe_buffer { | 
|  | struct list_head node; | 
|  |  | 
|  | /* original request */ | 
|  | void		*ptr; | 
|  | size_t		size; | 
|  | int		direction; | 
|  |  | 
|  | /* safe buffer info */ | 
|  | struct dmabounce_pool *pool; | 
|  | void		*safe; | 
|  | dma_addr_t	safe_dma_addr; | 
|  | }; | 
|  |  | 
|  | struct dmabounce_pool { | 
|  | unsigned long	size; | 
|  | struct dma_pool	*pool; | 
|  | #ifdef STATS | 
|  | unsigned long	allocs; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | struct dmabounce_device_info { | 
|  | struct device *dev; | 
|  | struct list_head safe_buffers; | 
|  | #ifdef STATS | 
|  | unsigned long total_allocs; | 
|  | unsigned long map_op_count; | 
|  | unsigned long bounce_count; | 
|  | int attr_res; | 
|  | #endif | 
|  | struct dmabounce_pool	small; | 
|  | struct dmabounce_pool	large; | 
|  |  | 
|  | rwlock_t lock; | 
|  |  | 
|  | int (*needs_bounce)(struct device *, dma_addr_t, size_t); | 
|  | }; | 
|  |  | 
|  | #ifdef STATS | 
|  | static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = dev->archdata.dmabounce; | 
|  | return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n", | 
|  | device_info->small.allocs, | 
|  | device_info->large.allocs, | 
|  | device_info->total_allocs - device_info->small.allocs - | 
|  | device_info->large.allocs, | 
|  | device_info->total_allocs, | 
|  | device_info->map_op_count, | 
|  | device_info->bounce_count); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL); | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /* allocate a 'safe' buffer and keep track of it */ | 
|  | static inline struct safe_buffer * | 
|  | alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, | 
|  | size_t size, enum dma_data_direction dir) | 
|  | { | 
|  | struct safe_buffer *buf; | 
|  | struct dmabounce_pool *pool; | 
|  | struct device *dev = device_info->dev; | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n", | 
|  | __func__, ptr, size, dir); | 
|  |  | 
|  | if (size <= device_info->small.size) { | 
|  | pool = &device_info->small; | 
|  | } else if (size <= device_info->large.size) { | 
|  | pool = &device_info->large; | 
|  | } else { | 
|  | pool = NULL; | 
|  | } | 
|  |  | 
|  | buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); | 
|  | if (buf == NULL) { | 
|  | dev_warn(dev, "%s: kmalloc failed\n", __func__); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | buf->ptr = ptr; | 
|  | buf->size = size; | 
|  | buf->direction = dir; | 
|  | buf->pool = pool; | 
|  |  | 
|  | if (pool) { | 
|  | buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC, | 
|  | &buf->safe_dma_addr); | 
|  | } else { | 
|  | buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr, | 
|  | GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | if (buf->safe == NULL) { | 
|  | dev_warn(dev, | 
|  | "%s: could not alloc dma memory (size=%d)\n", | 
|  | __func__, size); | 
|  | kfree(buf); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #ifdef STATS | 
|  | if (pool) | 
|  | pool->allocs++; | 
|  | device_info->total_allocs++; | 
|  | #endif | 
|  |  | 
|  | write_lock_irqsave(&device_info->lock, flags); | 
|  | list_add(&buf->node, &device_info->safe_buffers); | 
|  | write_unlock_irqrestore(&device_info->lock, flags); | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | /* determine if a buffer is from our "safe" pool */ | 
|  | static inline struct safe_buffer * | 
|  | find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) | 
|  | { | 
|  | struct safe_buffer *b, *rb = NULL; | 
|  | unsigned long flags; | 
|  |  | 
|  | read_lock_irqsave(&device_info->lock, flags); | 
|  |  | 
|  | list_for_each_entry(b, &device_info->safe_buffers, node) | 
|  | if (b->safe_dma_addr <= safe_dma_addr && | 
|  | b->safe_dma_addr + b->size > safe_dma_addr) { | 
|  | rb = b; | 
|  | break; | 
|  | } | 
|  |  | 
|  | read_unlock_irqrestore(&device_info->lock, flags); | 
|  | return rb; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf); | 
|  |  | 
|  | write_lock_irqsave(&device_info->lock, flags); | 
|  |  | 
|  | list_del(&buf->node); | 
|  |  | 
|  | write_unlock_irqrestore(&device_info->lock, flags); | 
|  |  | 
|  | if (buf->pool) | 
|  | dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr); | 
|  | else | 
|  | dma_free_coherent(device_info->dev, buf->size, buf->safe, | 
|  | buf->safe_dma_addr); | 
|  |  | 
|  | kfree(buf); | 
|  | } | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | static struct safe_buffer *find_safe_buffer_dev(struct device *dev, | 
|  | dma_addr_t dma_addr, const char *where) | 
|  | { | 
|  | if (!dev || !dev->archdata.dmabounce) | 
|  | return NULL; | 
|  | if (dma_mapping_error(dev, dma_addr)) { | 
|  | dev_err(dev, "Trying to %s invalid mapping\n", where); | 
|  | return NULL; | 
|  | } | 
|  | return find_safe_buffer(dev->archdata.dmabounce, dma_addr); | 
|  | } | 
|  |  | 
|  | static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) | 
|  | { | 
|  | if (!dev || !dev->archdata.dmabounce) | 
|  | return 0; | 
|  |  | 
|  | if (dev->dma_mask) { | 
|  | unsigned long limit, mask = *dev->dma_mask; | 
|  |  | 
|  | limit = (mask + 1) & ~mask; | 
|  | if (limit && size > limit) { | 
|  | dev_err(dev, "DMA mapping too big (requested %#x " | 
|  | "mask %#Lx)\n", size, *dev->dma_mask); | 
|  | return -E2BIG; | 
|  | } | 
|  |  | 
|  | /* Figure out if we need to bounce from the DMA mask. */ | 
|  | if ((dma_addr | (dma_addr + size - 1)) & ~mask) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size); | 
|  | } | 
|  |  | 
|  | static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = dev->archdata.dmabounce; | 
|  | struct safe_buffer *buf; | 
|  |  | 
|  | if (device_info) | 
|  | DO_STATS ( device_info->map_op_count++ ); | 
|  |  | 
|  | buf = alloc_safe_buffer(device_info, ptr, size, dir); | 
|  | if (buf == NULL) { | 
|  | dev_err(dev, "%s: unable to map unsafe buffer %p!\n", | 
|  | __func__, ptr); | 
|  | return DMA_ERROR_CODE; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", | 
|  | __func__, buf->ptr, virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, buf->safe_dma_addr); | 
|  |  | 
|  | if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) { | 
|  | dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", | 
|  | __func__, ptr, buf->safe, size); | 
|  | memcpy(buf->safe, ptr, size); | 
|  | } | 
|  |  | 
|  | return buf->safe_dma_addr; | 
|  | } | 
|  |  | 
|  | static inline void unmap_single(struct device *dev, struct safe_buffer *buf, | 
|  | size_t size, enum dma_data_direction dir) | 
|  | { | 
|  | BUG_ON(buf->size != size); | 
|  | BUG_ON(buf->direction != dir); | 
|  |  | 
|  | dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", | 
|  | __func__, buf->ptr, virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, buf->safe_dma_addr); | 
|  |  | 
|  | DO_STATS(dev->archdata.dmabounce->bounce_count++); | 
|  |  | 
|  | if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { | 
|  | void *ptr = buf->ptr; | 
|  |  | 
|  | dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", | 
|  | __func__, buf->safe, ptr, size); | 
|  | memcpy(ptr, buf->safe, size); | 
|  |  | 
|  | /* | 
|  | * Since we may have written to a page cache page, | 
|  | * we need to ensure that the data will be coherent | 
|  | * with user mappings. | 
|  | */ | 
|  | __cpuc_flush_dcache_area(ptr, size); | 
|  | } | 
|  | free_safe_buffer(dev->archdata.dmabounce, buf); | 
|  | } | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | /* | 
|  | * see if a buffer address is in an 'unsafe' range.  if it is | 
|  | * allocate a 'safe' buffer and copy the unsafe buffer into it. | 
|  | * substitute the safe buffer for the unsafe one. | 
|  | * (basically move the buffer from an unsafe area to a safe one) | 
|  | */ | 
|  | static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, | 
|  | unsigned long offset, size_t size, enum dma_data_direction dir, | 
|  | struct dma_attrs *attrs) | 
|  | { | 
|  | dma_addr_t dma_addr; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n", | 
|  | __func__, page, offset, size, dir); | 
|  |  | 
|  | dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset; | 
|  |  | 
|  | ret = needs_bounce(dev, dma_addr, size); | 
|  | if (ret < 0) | 
|  | return DMA_ERROR_CODE; | 
|  |  | 
|  | if (ret == 0) { | 
|  | arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  | if (PageHighMem(page)) { | 
|  | dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n"); | 
|  | return DMA_ERROR_CODE; | 
|  | } | 
|  |  | 
|  | return map_single(dev, page_address(page) + offset, size, dir); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * see if a mapped address was really a "safe" buffer and if so, copy | 
|  | * the data from the safe buffer back to the unsafe buffer and free up | 
|  | * the safe buffer.  (basically return things back to the way they | 
|  | * should be) | 
|  | */ | 
|  | static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir, struct dma_attrs *attrs) | 
|  | { | 
|  | struct safe_buffer *buf; | 
|  |  | 
|  | dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n", | 
|  | __func__, dma_addr, size, dir); | 
|  |  | 
|  | buf = find_safe_buffer_dev(dev, dma_addr, __func__); | 
|  | if (!buf) { | 
|  | arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir); | 
|  | return; | 
|  | } | 
|  |  | 
|  | unmap_single(dev, buf, size, dir); | 
|  | } | 
|  |  | 
|  | static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, | 
|  | size_t sz, enum dma_data_direction dir) | 
|  | { | 
|  | struct safe_buffer *buf; | 
|  | unsigned long off; | 
|  |  | 
|  | dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", | 
|  | __func__, addr, off, sz, dir); | 
|  |  | 
|  | buf = find_safe_buffer_dev(dev, addr, __func__); | 
|  | if (!buf) | 
|  | return 1; | 
|  |  | 
|  | off = addr - buf->safe_dma_addr; | 
|  |  | 
|  | BUG_ON(buf->direction != dir); | 
|  |  | 
|  | dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", | 
|  | __func__, buf->ptr, virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, buf->safe_dma_addr); | 
|  |  | 
|  | DO_STATS(dev->archdata.dmabounce->bounce_count++); | 
|  |  | 
|  | if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { | 
|  | dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", | 
|  | __func__, buf->safe + off, buf->ptr + off, sz); | 
|  | memcpy(buf->ptr + off, buf->safe + off, sz); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dmabounce_sync_for_cpu(struct device *dev, | 
|  | dma_addr_t handle, size_t size, enum dma_data_direction dir) | 
|  | { | 
|  | if (!__dmabounce_sync_for_cpu(dev, handle, size, dir)) | 
|  | return; | 
|  |  | 
|  | arm_dma_ops.sync_single_for_cpu(dev, handle, size, dir); | 
|  | } | 
|  |  | 
|  | static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, | 
|  | size_t sz, enum dma_data_direction dir) | 
|  | { | 
|  | struct safe_buffer *buf; | 
|  | unsigned long off; | 
|  |  | 
|  | dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", | 
|  | __func__, addr, off, sz, dir); | 
|  |  | 
|  | buf = find_safe_buffer_dev(dev, addr, __func__); | 
|  | if (!buf) | 
|  | return 1; | 
|  |  | 
|  | off = addr - buf->safe_dma_addr; | 
|  |  | 
|  | BUG_ON(buf->direction != dir); | 
|  |  | 
|  | dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", | 
|  | __func__, buf->ptr, virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, buf->safe_dma_addr); | 
|  |  | 
|  | DO_STATS(dev->archdata.dmabounce->bounce_count++); | 
|  |  | 
|  | if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) { | 
|  | dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n", | 
|  | __func__,buf->ptr + off, buf->safe + off, sz); | 
|  | memcpy(buf->safe + off, buf->ptr + off, sz); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dmabounce_sync_for_device(struct device *dev, | 
|  | dma_addr_t handle, size_t size, enum dma_data_direction dir) | 
|  | { | 
|  | if (!__dmabounce_sync_for_device(dev, handle, size, dir)) | 
|  | return; | 
|  |  | 
|  | arm_dma_ops.sync_single_for_device(dev, handle, size, dir); | 
|  | } | 
|  |  | 
|  | static int dmabounce_set_mask(struct device *dev, u64 dma_mask) | 
|  | { | 
|  | if (dev->archdata.dmabounce) | 
|  | return 0; | 
|  |  | 
|  | return arm_dma_ops.set_dma_mask(dev, dma_mask); | 
|  | } | 
|  |  | 
|  | static struct dma_map_ops dmabounce_ops = { | 
|  | .alloc			= arm_dma_alloc, | 
|  | .free			= arm_dma_free, | 
|  | .mmap			= arm_dma_mmap, | 
|  | .map_page		= dmabounce_map_page, | 
|  | .unmap_page		= dmabounce_unmap_page, | 
|  | .sync_single_for_cpu	= dmabounce_sync_for_cpu, | 
|  | .sync_single_for_device	= dmabounce_sync_for_device, | 
|  | .map_sg			= arm_dma_map_sg, | 
|  | .unmap_sg		= arm_dma_unmap_sg, | 
|  | .sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu, | 
|  | .sync_sg_for_device	= arm_dma_sync_sg_for_device, | 
|  | .set_dma_mask		= dmabounce_set_mask, | 
|  | }; | 
|  |  | 
|  | static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, | 
|  | const char *name, unsigned long size) | 
|  | { | 
|  | pool->size = size; | 
|  | DO_STATS(pool->allocs = 0); | 
|  | pool->pool = dma_pool_create(name, dev, size, | 
|  | 0 /* byte alignment */, | 
|  | 0 /* no page-crossing issues */); | 
|  |  | 
|  | return pool->pool ? 0 : -ENOMEM; | 
|  | } | 
|  |  | 
|  | int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, | 
|  | unsigned long large_buffer_size, | 
|  | int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t)) | 
|  | { | 
|  | struct dmabounce_device_info *device_info; | 
|  | int ret; | 
|  |  | 
|  | device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); | 
|  | if (!device_info) { | 
|  | dev_err(dev, | 
|  | "Could not allocated dmabounce_device_info\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = dmabounce_init_pool(&device_info->small, dev, | 
|  | "small_dmabounce_pool", small_buffer_size); | 
|  | if (ret) { | 
|  | dev_err(dev, | 
|  | "dmabounce: could not allocate DMA pool for %ld byte objects\n", | 
|  | small_buffer_size); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (large_buffer_size) { | 
|  | ret = dmabounce_init_pool(&device_info->large, dev, | 
|  | "large_dmabounce_pool", | 
|  | large_buffer_size); | 
|  | if (ret) { | 
|  | dev_err(dev, | 
|  | "dmabounce: could not allocate DMA pool for %ld byte objects\n", | 
|  | large_buffer_size); | 
|  | goto err_destroy; | 
|  | } | 
|  | } | 
|  |  | 
|  | device_info->dev = dev; | 
|  | INIT_LIST_HEAD(&device_info->safe_buffers); | 
|  | rwlock_init(&device_info->lock); | 
|  | device_info->needs_bounce = needs_bounce_fn; | 
|  |  | 
|  | #ifdef STATS | 
|  | device_info->total_allocs = 0; | 
|  | device_info->map_op_count = 0; | 
|  | device_info->bounce_count = 0; | 
|  | device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats); | 
|  | #endif | 
|  |  | 
|  | dev->archdata.dmabounce = device_info; | 
|  | set_dma_ops(dev, &dmabounce_ops); | 
|  |  | 
|  | dev_info(dev, "dmabounce: registered device\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_destroy: | 
|  | dma_pool_destroy(device_info->small.pool); | 
|  | err_free: | 
|  | kfree(device_info); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(dmabounce_register_dev); | 
|  |  | 
|  | void dmabounce_unregister_dev(struct device *dev) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = dev->archdata.dmabounce; | 
|  |  | 
|  | dev->archdata.dmabounce = NULL; | 
|  | set_dma_ops(dev, NULL); | 
|  |  | 
|  | if (!device_info) { | 
|  | dev_warn(dev, | 
|  | "Never registered with dmabounce but attempting" | 
|  | "to unregister!\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!list_empty(&device_info->safe_buffers)) { | 
|  | dev_err(dev, | 
|  | "Removing from dmabounce with pending buffers!\n"); | 
|  | BUG(); | 
|  | } | 
|  |  | 
|  | if (device_info->small.pool) | 
|  | dma_pool_destroy(device_info->small.pool); | 
|  | if (device_info->large.pool) | 
|  | dma_pool_destroy(device_info->large.pool); | 
|  |  | 
|  | #ifdef STATS | 
|  | if (device_info->attr_res == 0) | 
|  | device_remove_file(dev, &dev_attr_dmabounce_stats); | 
|  | #endif | 
|  |  | 
|  | kfree(device_info); | 
|  |  | 
|  | dev_info(dev, "dmabounce: device unregistered\n"); | 
|  | } | 
|  | EXPORT_SYMBOL(dmabounce_unregister_dev); | 
|  |  | 
|  | MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>"); | 
|  | MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows"); | 
|  | MODULE_LICENSE("GPL"); |