|  | /* | 
|  | * linux/arch/arm/mach-omap2/board-rx51-video.c | 
|  | * | 
|  | * Copyright (C) 2010 Nokia | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/mm.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <video/omapdss.h> | 
|  | #include <plat/vram.h> | 
|  | #include <plat/mcspi.h> | 
|  |  | 
|  | #include <mach/board-rx51.h> | 
|  |  | 
|  | #include "mux.h" | 
|  |  | 
|  | #define RX51_LCD_RESET_GPIO	90 | 
|  |  | 
|  | #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) | 
|  |  | 
|  | static int rx51_lcd_enable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | gpio_set_value(dssdev->reset_gpio, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rx51_lcd_disable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | gpio_set_value(dssdev->reset_gpio, 0); | 
|  | } | 
|  |  | 
|  | static struct omap_dss_device rx51_lcd_device = { | 
|  | .name			= "lcd", | 
|  | .driver_name		= "panel-acx565akm", | 
|  | .type			= OMAP_DISPLAY_TYPE_SDI, | 
|  | .phy.sdi.datapairs	= 2, | 
|  | .reset_gpio		= RX51_LCD_RESET_GPIO, | 
|  | .platform_enable	= rx51_lcd_enable, | 
|  | .platform_disable	= rx51_lcd_disable, | 
|  | }; | 
|  |  | 
|  | static struct omap_dss_device  rx51_tv_device = { | 
|  | .name			= "tv", | 
|  | .type			= OMAP_DISPLAY_TYPE_VENC, | 
|  | .driver_name		= "venc", | 
|  | .phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE, | 
|  | }; | 
|  |  | 
|  | static struct omap_dss_device *rx51_dss_devices[] = { | 
|  | &rx51_lcd_device, | 
|  | &rx51_tv_device, | 
|  | }; | 
|  |  | 
|  | static struct omap_dss_board_info rx51_dss_board_info = { | 
|  | .num_devices	= ARRAY_SIZE(rx51_dss_devices), | 
|  | .devices	= rx51_dss_devices, | 
|  | .default_device	= &rx51_lcd_device, | 
|  | }; | 
|  |  | 
|  | static int __init rx51_video_init(void) | 
|  | { | 
|  | if (!machine_is_nokia_rx51()) | 
|  | return 0; | 
|  |  | 
|  | if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { | 
|  | pr_err("%s cannot configure MUX for LCD RESET\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, | 
|  | "LCD ACX565AKM reset")) { | 
|  | pr_err("%s failed to get LCD Reset GPIO\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | omap_display_init(&rx51_dss_board_info); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(rx51_video_init); | 
|  |  | 
|  | void __init rx51_video_mem_init(void) | 
|  | { | 
|  | /* | 
|  | * GFX 864x480x32bpp | 
|  | * VID1/2 1280x720x32bpp double buffered | 
|  | */ | 
|  | omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) + | 
|  | 2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0); | 
|  | } | 
|  |  | 
|  | #else | 
|  | void __init rx51_video_mem_init(void) { } | 
|  | #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ |