|  | /* | 
|  | * AD7879-1/AD7889-1 touchscreen (I2C bus) | 
|  | * | 
|  | * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. | 
|  | * | 
|  | * Licensed under the GPL-2 or later. | 
|  | */ | 
|  |  | 
|  | #include <linux/input.h>	/* BUS_I2C */ | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/pm.h> | 
|  |  | 
|  | #include "ad7879.h" | 
|  |  | 
|  | #define AD7879_DEVID		0x79	/* AD7879-1/AD7889-1 */ | 
|  |  | 
|  | /* All registers are word-sized. | 
|  | * AD7879 uses a high-byte first convention. | 
|  | */ | 
|  | static int ad7879_i2c_read(struct device *dev, u8 reg) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return i2c_smbus_read_word_swapped(client, reg); | 
|  | } | 
|  |  | 
|  | static int ad7879_i2c_multi_read(struct device *dev, | 
|  | u8 first_reg, u8 count, u16 *buf) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | u8 idx; | 
|  |  | 
|  | i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf); | 
|  |  | 
|  | for (idx = 0; idx < count; ++idx) | 
|  | buf[idx] = swab16(buf[idx]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return i2c_smbus_write_word_swapped(client, reg, val); | 
|  | } | 
|  |  | 
|  | static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { | 
|  | .bustype	= BUS_I2C, | 
|  | .read		= ad7879_i2c_read, | 
|  | .multi_read	= ad7879_i2c_multi_read, | 
|  | .write		= ad7879_i2c_write, | 
|  | }; | 
|  |  | 
|  | static int __devinit ad7879_i2c_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct ad7879 *ts; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_WORD_DATA)) { | 
|  | dev_err(&client->dev, "SMBUS Word Data not Supported\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq, | 
|  | &ad7879_i2c_bus_ops); | 
|  | if (IS_ERR(ts)) | 
|  | return PTR_ERR(ts); | 
|  |  | 
|  | i2c_set_clientdata(client, ts); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devexit ad7879_i2c_remove(struct i2c_client *client) | 
|  | { | 
|  | struct ad7879 *ts = i2c_get_clientdata(client); | 
|  |  | 
|  | ad7879_remove(ts); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id ad7879_id[] = { | 
|  | { "ad7879", 0 }, | 
|  | { "ad7889", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ad7879_id); | 
|  |  | 
|  | static struct i2c_driver ad7879_i2c_driver = { | 
|  | .driver = { | 
|  | .name	= "ad7879", | 
|  | .owner	= THIS_MODULE, | 
|  | .pm	= &ad7879_pm_ops, | 
|  | }, | 
|  | .probe		= ad7879_i2c_probe, | 
|  | .remove		= __devexit_p(ad7879_i2c_remove), | 
|  | .id_table	= ad7879_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(ad7879_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); | 
|  | MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); | 
|  | MODULE_LICENSE("GPL"); |