|  | /* | 
|  | * Driver for EETI eGalax Multiple Touch Controller | 
|  | * | 
|  | * Copyright (C) 2011 Freescale Semiconductor, Inc. | 
|  | * | 
|  | * based on max11801_ts.c | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | /* EETI eGalax serial touch screen controller is a I2C based multiple | 
|  | * touch screen controller, it supports 5 point multiple touch. */ | 
|  |  | 
|  | /* TODO: | 
|  | - auto idle mode support | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/input/mt.h> | 
|  |  | 
|  | /* | 
|  | * Mouse Mode: some panel may configure the controller to mouse mode, | 
|  | * which can only report one point at a given time. | 
|  | * This driver will ignore events in this mode. | 
|  | */ | 
|  | #define REPORT_MODE_MOUSE		0x1 | 
|  | /* | 
|  | * Vendor Mode: this mode is used to transfer some vendor specific | 
|  | * messages. | 
|  | * This driver will ignore events in this mode. | 
|  | */ | 
|  | #define REPORT_MODE_VENDOR		0x3 | 
|  | /* Multiple Touch Mode */ | 
|  | #define REPORT_MODE_MTTOUCH		0x4 | 
|  |  | 
|  | #define MAX_SUPPORT_POINTS		5 | 
|  |  | 
|  | #define EVENT_VALID_OFFSET	7 | 
|  | #define EVENT_VALID_MASK	(0x1 << EVENT_VALID_OFFSET) | 
|  | #define EVENT_ID_OFFSET		2 | 
|  | #define EVENT_ID_MASK		(0xf << EVENT_ID_OFFSET) | 
|  | #define EVENT_IN_RANGE		(0x1 << 1) | 
|  | #define EVENT_DOWN_UP		(0X1 << 0) | 
|  |  | 
|  | #define MAX_I2C_DATA_LEN	10 | 
|  |  | 
|  | #define EGALAX_MAX_X	32760 | 
|  | #define EGALAX_MAX_Y	32760 | 
|  | #define EGALAX_MAX_TRIES 100 | 
|  |  | 
|  | struct egalax_ts { | 
|  | struct i2c_client		*client; | 
|  | struct input_dev		*input_dev; | 
|  | }; | 
|  |  | 
|  | static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct egalax_ts *ts = dev_id; | 
|  | struct input_dev *input_dev = ts->input_dev; | 
|  | struct i2c_client *client = ts->client; | 
|  | u8 buf[MAX_I2C_DATA_LEN]; | 
|  | int id, ret, x, y, z; | 
|  | int tries = 0; | 
|  | bool down, valid; | 
|  | u8 state; | 
|  |  | 
|  | do { | 
|  | ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN); | 
|  | } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES); | 
|  |  | 
|  | if (ret < 0) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | if (buf[0] != REPORT_MODE_MTTOUCH) { | 
|  | /* ignore mouse events and vendor events */ | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | state = buf[1]; | 
|  | x = (buf[3] << 8) | buf[2]; | 
|  | y = (buf[5] << 8) | buf[4]; | 
|  | z = (buf[7] << 8) | buf[6]; | 
|  |  | 
|  | valid = state & EVENT_VALID_MASK; | 
|  | id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET; | 
|  | down = state & EVENT_DOWN_UP; | 
|  |  | 
|  | if (!valid || id > MAX_SUPPORT_POINTS) { | 
|  | dev_dbg(&client->dev, "point invalid\n"); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | input_mt_slot(input_dev, id); | 
|  | input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down); | 
|  |  | 
|  | dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d", | 
|  | down ? "down" : "up", id, x, y, z); | 
|  |  | 
|  | if (down) { | 
|  | input_report_abs(input_dev, ABS_MT_POSITION_X, x); | 
|  | input_report_abs(input_dev, ABS_MT_POSITION_Y, y); | 
|  | input_report_abs(input_dev, ABS_MT_PRESSURE, z); | 
|  | } | 
|  |  | 
|  | input_mt_report_pointer_emulation(input_dev, true); | 
|  | input_sync(input_dev); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* wake up controller by an falling edge of interrupt gpio.  */ | 
|  | static int egalax_wake_up_device(struct i2c_client *client) | 
|  | { | 
|  | int gpio = irq_to_gpio(client->irq); | 
|  | int ret; | 
|  |  | 
|  | ret = gpio_request(gpio, "egalax_irq"); | 
|  | if (ret < 0) { | 
|  | dev_err(&client->dev, | 
|  | "request gpio failed, cannot wake up controller: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* wake up controller via an falling edge on IRQ gpio. */ | 
|  | gpio_direction_output(gpio, 0); | 
|  | gpio_set_value(gpio, 1); | 
|  |  | 
|  | /* controller should be waken up, return irq.  */ | 
|  | gpio_direction_input(gpio); | 
|  | gpio_free(gpio); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devinit egalax_firmware_version(struct i2c_client *client) | 
|  | { | 
|  | static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 }; | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devinit egalax_ts_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct egalax_ts *ts; | 
|  | struct input_dev *input_dev; | 
|  | int ret; | 
|  | int error; | 
|  |  | 
|  | ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL); | 
|  | if (!ts) { | 
|  | dev_err(&client->dev, "Failed to allocate memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | input_dev = input_allocate_device(); | 
|  | if (!input_dev) { | 
|  | dev_err(&client->dev, "Failed to allocate memory\n"); | 
|  | error = -ENOMEM; | 
|  | goto err_free_ts; | 
|  | } | 
|  |  | 
|  | ts->client = client; | 
|  | ts->input_dev = input_dev; | 
|  |  | 
|  | /* controller may be in sleep, wake it up. */ | 
|  | egalax_wake_up_device(client); | 
|  |  | 
|  | ret = egalax_firmware_version(client); | 
|  | if (ret < 0) { | 
|  | dev_err(&client->dev, "Failed to read firmware version\n"); | 
|  | error = -EIO; | 
|  | goto err_free_dev; | 
|  | } | 
|  |  | 
|  | input_dev->name = "EETI eGalax Touch Screen"; | 
|  | input_dev->id.bustype = BUS_I2C; | 
|  | input_dev->dev.parent = &client->dev; | 
|  |  | 
|  | __set_bit(EV_ABS, input_dev->evbit); | 
|  | __set_bit(EV_KEY, input_dev->evbit); | 
|  | __set_bit(BTN_TOUCH, input_dev->keybit); | 
|  |  | 
|  | input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0); | 
|  | input_set_abs_params(input_dev, | 
|  | ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); | 
|  | input_set_abs_params(input_dev, | 
|  | ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); | 
|  | input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS); | 
|  |  | 
|  | input_set_drvdata(input_dev, ts); | 
|  |  | 
|  | error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt, | 
|  | IRQF_TRIGGER_LOW | IRQF_ONESHOT, | 
|  | "egalax_ts", ts); | 
|  | if (error < 0) { | 
|  | dev_err(&client->dev, "Failed to register interrupt\n"); | 
|  | goto err_free_dev; | 
|  | } | 
|  |  | 
|  | error = input_register_device(ts->input_dev); | 
|  | if (error) | 
|  | goto err_free_irq; | 
|  |  | 
|  | i2c_set_clientdata(client, ts); | 
|  | return 0; | 
|  |  | 
|  | err_free_irq: | 
|  | free_irq(client->irq, ts); | 
|  | err_free_dev: | 
|  | input_free_device(input_dev); | 
|  | err_free_ts: | 
|  | kfree(ts); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static __devexit int egalax_ts_remove(struct i2c_client *client) | 
|  | { | 
|  | struct egalax_ts *ts = i2c_get_clientdata(client); | 
|  |  | 
|  | free_irq(client->irq, ts); | 
|  |  | 
|  | input_unregister_device(ts->input_dev); | 
|  | kfree(ts); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id egalax_ts_id[] = { | 
|  | { "egalax_ts", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, egalax_ts_id); | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int egalax_ts_suspend(struct device *dev) | 
|  | { | 
|  | static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = { | 
|  | 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0 | 
|  | }; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); | 
|  | return ret > 0 ? 0 : ret; | 
|  | } | 
|  |  | 
|  | static int egalax_ts_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return egalax_wake_up_device(client); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); | 
|  |  | 
|  | static struct i2c_driver egalax_ts_driver = { | 
|  | .driver = { | 
|  | .name	= "egalax_ts", | 
|  | .owner	= THIS_MODULE, | 
|  | .pm	= &egalax_ts_pm_ops, | 
|  | }, | 
|  | .id_table	= egalax_ts_id, | 
|  | .probe		= egalax_ts_probe, | 
|  | .remove		= __devexit_p(egalax_ts_remove), | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(egalax_ts_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Freescale Semiconductor, Inc."); | 
|  | MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); | 
|  | MODULE_LICENSE("GPL"); |