|  | /* | 
|  | * rrunner.c: Linux driver for the Essential RoadRunner HIPPI board. | 
|  | * | 
|  | * Copyright (C) 1998-2002 by Jes Sorensen, <jes@wildopensource.com>. | 
|  | * | 
|  | * Thanks to Essential Communication for providing us with hardware | 
|  | * and very comprehensive documentation without which I would not have | 
|  | * been able to write this driver. A special thank you to John Gibbon | 
|  | * for sorting out the legal issues, with the NDA, allowing the code to | 
|  | * be released under the GPL. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * Thanks to Jayaram Bhat from ODS/Essential for fixing some of the | 
|  | * stupid bugs in my code. | 
|  | * | 
|  | * Softnet support and various other patches from Val Henson of | 
|  | * ODS/Essential. | 
|  | * | 
|  | * PCI DMA mapping code partly based on work by Francois Romieu. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #define DEBUG 1 | 
|  | #define RX_DMA_SKBUFF 1 | 
|  | #define PKT_COPY_THRESHOLD 512 | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/hippidevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/sock.h> | 
|  |  | 
|  | #include <asm/cache.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/uaccess.h> | 
|  |  | 
|  | #define rr_if_busy(dev)     netif_queue_stopped(dev) | 
|  | #define rr_if_running(dev)  netif_running(dev) | 
|  |  | 
|  | #include "rrunner.h" | 
|  |  | 
|  | #define RUN_AT(x) (jiffies + (x)) | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Jes Sorensen <jes@wildopensource.com>"); | 
|  | MODULE_DESCRIPTION("Essential RoadRunner HIPPI driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static char version[] __devinitdata = "rrunner.c: v0.50 11/11/2002  Jes Sorensen (jes@wildopensource.com)\n"; | 
|  |  | 
|  |  | 
|  | static const struct net_device_ops rr_netdev_ops = { | 
|  | .ndo_open 		= rr_open, | 
|  | .ndo_stop		= rr_close, | 
|  | .ndo_do_ioctl		= rr_ioctl, | 
|  | .ndo_start_xmit		= rr_start_xmit, | 
|  | .ndo_change_mtu		= hippi_change_mtu, | 
|  | .ndo_set_mac_address	= hippi_mac_addr, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Implementation notes: | 
|  | * | 
|  | * The DMA engine only allows for DMA within physical 64KB chunks of | 
|  | * memory. The current approach of the driver (and stack) is to use | 
|  | * linear blocks of memory for the skbuffs. However, as the data block | 
|  | * is always the first part of the skb and skbs are 2^n aligned so we | 
|  | * are guarantted to get the whole block within one 64KB align 64KB | 
|  | * chunk. | 
|  | * | 
|  | * On the long term, relying on being able to allocate 64KB linear | 
|  | * chunks of memory is not feasible and the skb handling code and the | 
|  | * stack will need to know about I/O vectors or something similar. | 
|  | */ | 
|  |  | 
|  | static int __devinit rr_init_one(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | struct net_device *dev; | 
|  | static int version_disp; | 
|  | u8 pci_latency; | 
|  | struct rr_private *rrpriv; | 
|  | void *tmpptr; | 
|  | dma_addr_t ring_dma; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  | dev = alloc_hippi_dev(sizeof(struct rr_private)); | 
|  | if (!dev) | 
|  | goto out3; | 
|  |  | 
|  | ret = pci_enable_device(pdev); | 
|  | if (ret) { | 
|  | ret = -ENODEV; | 
|  | goto out2; | 
|  | } | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  |  | 
|  | SET_NETDEV_DEV(dev, &pdev->dev); | 
|  |  | 
|  | ret = pci_request_regions(pdev, "rrunner"); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | pci_set_drvdata(pdev, dev); | 
|  |  | 
|  | rrpriv->pci_dev = pdev; | 
|  |  | 
|  | spin_lock_init(&rrpriv->lock); | 
|  |  | 
|  | dev->netdev_ops = &rr_netdev_ops; | 
|  |  | 
|  | /* display version info if adapter is found */ | 
|  | if (!version_disp) { | 
|  | /* set display flag to TRUE so that */ | 
|  | /* we only display this string ONCE */ | 
|  | version_disp = 1; | 
|  | printk(version); | 
|  | } | 
|  |  | 
|  | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); | 
|  | if (pci_latency <= 0x58){ | 
|  | pci_latency = 0x58; | 
|  | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, pci_latency); | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | printk(KERN_INFO "%s: Essential RoadRunner serial HIPPI " | 
|  | "at 0x%llx, irq %i, PCI latency %i\n", dev->name, | 
|  | (unsigned long long)pci_resource_start(pdev, 0), | 
|  | pdev->irq, pci_latency); | 
|  |  | 
|  | /* | 
|  | * Remap the MMIO regs into kernel space. | 
|  | */ | 
|  | rrpriv->regs = pci_iomap(pdev, 0, 0x1000); | 
|  | if (!rrpriv->regs) { | 
|  | printk(KERN_ERR "%s:  Unable to map I/O register, " | 
|  | "RoadRunner will be disabled.\n", dev->name); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | tmpptr = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma); | 
|  | rrpriv->tx_ring = tmpptr; | 
|  | rrpriv->tx_ring_dma = ring_dma; | 
|  |  | 
|  | if (!tmpptr) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | tmpptr = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma); | 
|  | rrpriv->rx_ring = tmpptr; | 
|  | rrpriv->rx_ring_dma = ring_dma; | 
|  |  | 
|  | if (!tmpptr) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | tmpptr = pci_alloc_consistent(pdev, EVT_RING_SIZE, &ring_dma); | 
|  | rrpriv->evt_ring = tmpptr; | 
|  | rrpriv->evt_ring_dma = ring_dma; | 
|  |  | 
|  | if (!tmpptr) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Don't access any register before this point! | 
|  | */ | 
|  | #ifdef __BIG_ENDIAN | 
|  | writel(readl(&rrpriv->regs->HostCtrl) | NO_SWAP, | 
|  | &rrpriv->regs->HostCtrl); | 
|  | #endif | 
|  | /* | 
|  | * Need to add a case for little-endian 64-bit hosts here. | 
|  | */ | 
|  |  | 
|  | rr_init(dev); | 
|  |  | 
|  | ret = register_netdev(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | if (rrpriv->rx_ring) | 
|  | pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring, | 
|  | rrpriv->rx_ring_dma); | 
|  | if (rrpriv->tx_ring) | 
|  | pci_free_consistent(pdev, TX_TOTAL_SIZE, rrpriv->tx_ring, | 
|  | rrpriv->tx_ring_dma); | 
|  | if (rrpriv->regs) | 
|  | pci_iounmap(pdev, rrpriv->regs); | 
|  | if (pdev) { | 
|  | pci_release_regions(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | } | 
|  | out2: | 
|  | free_netdev(dev); | 
|  | out3: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __devexit rr_remove_one (struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct rr_private *rr = netdev_priv(dev); | 
|  |  | 
|  | if (!(readl(&rr->regs->HostCtrl) & NIC_HALTED)) { | 
|  | printk(KERN_ERR "%s: trying to unload running NIC\n", | 
|  | dev->name); | 
|  | writel(HALT_NIC, &rr->regs->HostCtrl); | 
|  | } | 
|  |  | 
|  | unregister_netdev(dev); | 
|  | pci_free_consistent(pdev, EVT_RING_SIZE, rr->evt_ring, | 
|  | rr->evt_ring_dma); | 
|  | pci_free_consistent(pdev, RX_TOTAL_SIZE, rr->rx_ring, | 
|  | rr->rx_ring_dma); | 
|  | pci_free_consistent(pdev, TX_TOTAL_SIZE, rr->tx_ring, | 
|  | rr->tx_ring_dma); | 
|  | pci_iounmap(pdev, rr->regs); | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | free_netdev(dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Commands are considered to be slow, thus there is no reason to | 
|  | * inline this. | 
|  | */ | 
|  | static void rr_issue_cmd(struct rr_private *rrpriv, struct cmd *cmd) | 
|  | { | 
|  | struct rr_regs __iomem *regs; | 
|  | u32 idx; | 
|  |  | 
|  | regs = rrpriv->regs; | 
|  | /* | 
|  | * This is temporary - it will go away in the final version. | 
|  | * We probably also want to make this function inline. | 
|  | */ | 
|  | if (readl(®s->HostCtrl) & NIC_HALTED){ | 
|  | printk("issuing command for halted NIC, code 0x%x, " | 
|  | "HostCtrl %08x\n", cmd->code, readl(®s->HostCtrl)); | 
|  | if (readl(®s->Mode) & FATAL_ERR) | 
|  | printk("error codes Fail1 %02x, Fail2 %02x\n", | 
|  | readl(®s->Fail1), readl(®s->Fail2)); | 
|  | } | 
|  |  | 
|  | idx = rrpriv->info->cmd_ctrl.pi; | 
|  |  | 
|  | writel(*(u32*)(cmd), ®s->CmdRing[idx]); | 
|  | wmb(); | 
|  |  | 
|  | idx = (idx - 1) % CMD_RING_ENTRIES; | 
|  | rrpriv->info->cmd_ctrl.pi = idx; | 
|  | wmb(); | 
|  |  | 
|  | if (readl(®s->Mode) & FATAL_ERR) | 
|  | printk("error code %02x\n", readl(®s->Fail1)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Reset the board in a sensible manner. The NIC is already halted | 
|  | * when we get here and a spin-lock is held. | 
|  | */ | 
|  | static int rr_reset(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | u32 start_pc; | 
|  | int i; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | rr_load_firmware(dev); | 
|  |  | 
|  | writel(0x01000000, ®s->TX_state); | 
|  | writel(0xff800000, ®s->RX_state); | 
|  | writel(0, ®s->AssistState); | 
|  | writel(CLEAR_INTA, ®s->LocalCtrl); | 
|  | writel(0x01, ®s->BrkPt); | 
|  | writel(0, ®s->Timer); | 
|  | writel(0, ®s->TimerRef); | 
|  | writel(RESET_DMA, ®s->DmaReadState); | 
|  | writel(RESET_DMA, ®s->DmaWriteState); | 
|  | writel(0, ®s->DmaWriteHostHi); | 
|  | writel(0, ®s->DmaWriteHostLo); | 
|  | writel(0, ®s->DmaReadHostHi); | 
|  | writel(0, ®s->DmaReadHostLo); | 
|  | writel(0, ®s->DmaReadLen); | 
|  | writel(0, ®s->DmaWriteLen); | 
|  | writel(0, ®s->DmaWriteLcl); | 
|  | writel(0, ®s->DmaWriteIPchecksum); | 
|  | writel(0, ®s->DmaReadLcl); | 
|  | writel(0, ®s->DmaReadIPchecksum); | 
|  | writel(0, ®s->PciState); | 
|  | #if (BITS_PER_LONG == 64) && defined __LITTLE_ENDIAN | 
|  | writel(SWAP_DATA | PTR64BIT | PTR_WD_SWAP, ®s->Mode); | 
|  | #elif (BITS_PER_LONG == 64) | 
|  | writel(SWAP_DATA | PTR64BIT | PTR_WD_NOSWAP, ®s->Mode); | 
|  | #else | 
|  | writel(SWAP_DATA | PTR32BIT | PTR_WD_NOSWAP, ®s->Mode); | 
|  | #endif | 
|  |  | 
|  | #if 0 | 
|  | /* | 
|  | * Don't worry, this is just black magic. | 
|  | */ | 
|  | writel(0xdf000, ®s->RxBase); | 
|  | writel(0xdf000, ®s->RxPrd); | 
|  | writel(0xdf000, ®s->RxCon); | 
|  | writel(0xce000, ®s->TxBase); | 
|  | writel(0xce000, ®s->TxPrd); | 
|  | writel(0xce000, ®s->TxCon); | 
|  | writel(0, ®s->RxIndPro); | 
|  | writel(0, ®s->RxIndCon); | 
|  | writel(0, ®s->RxIndRef); | 
|  | writel(0, ®s->TxIndPro); | 
|  | writel(0, ®s->TxIndCon); | 
|  | writel(0, ®s->TxIndRef); | 
|  | writel(0xcc000, ®s->pad10[0]); | 
|  | writel(0, ®s->DrCmndPro); | 
|  | writel(0, ®s->DrCmndCon); | 
|  | writel(0, ®s->DwCmndPro); | 
|  | writel(0, ®s->DwCmndCon); | 
|  | writel(0, ®s->DwCmndRef); | 
|  | writel(0, ®s->DrDataPro); | 
|  | writel(0, ®s->DrDataCon); | 
|  | writel(0, ®s->DrDataRef); | 
|  | writel(0, ®s->DwDataPro); | 
|  | writel(0, ®s->DwDataCon); | 
|  | writel(0, ®s->DwDataRef); | 
|  | #endif | 
|  |  | 
|  | writel(0xffffffff, ®s->MbEvent); | 
|  | writel(0, ®s->Event); | 
|  |  | 
|  | writel(0, ®s->TxPi); | 
|  | writel(0, ®s->IpRxPi); | 
|  |  | 
|  | writel(0, ®s->EvtCon); | 
|  | writel(0, ®s->EvtPrd); | 
|  |  | 
|  | rrpriv->info->evt_ctrl.pi = 0; | 
|  |  | 
|  | for (i = 0; i < CMD_RING_ENTRIES; i++) | 
|  | writel(0, ®s->CmdRing[i]); | 
|  |  | 
|  | /* | 
|  | * Why 32 ? is this not cache line size dependent? | 
|  | */ | 
|  | writel(RBURST_64|WBURST_64, ®s->PciState); | 
|  | wmb(); | 
|  |  | 
|  | start_pc = rr_read_eeprom_word(rrpriv, | 
|  | offsetof(struct eeprom, rncd_info.FwStart)); | 
|  |  | 
|  | #if (DEBUG > 1) | 
|  | printk("%s: Executing firmware at address 0x%06x\n", | 
|  | dev->name, start_pc); | 
|  | #endif | 
|  |  | 
|  | writel(start_pc + 0x800, ®s->Pc); | 
|  | wmb(); | 
|  | udelay(5); | 
|  |  | 
|  | writel(start_pc, ®s->Pc); | 
|  | wmb(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Read a string from the EEPROM. | 
|  | */ | 
|  | static unsigned int rr_read_eeprom(struct rr_private *rrpriv, | 
|  | unsigned long offset, | 
|  | unsigned char *buf, | 
|  | unsigned long length) | 
|  | { | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  | u32 misc, io, host, i; | 
|  |  | 
|  | io = readl(®s->ExtIo); | 
|  | writel(0, ®s->ExtIo); | 
|  | misc = readl(®s->LocalCtrl); | 
|  | writel(0, ®s->LocalCtrl); | 
|  | host = readl(®s->HostCtrl); | 
|  | writel(host | HALT_NIC, ®s->HostCtrl); | 
|  | mb(); | 
|  |  | 
|  | for (i = 0; i < length; i++){ | 
|  | writel((EEPROM_BASE + ((offset+i) << 3)), ®s->WinBase); | 
|  | mb(); | 
|  | buf[i] = (readl(®s->WinData) >> 24) & 0xff; | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | writel(host, ®s->HostCtrl); | 
|  | writel(misc, ®s->LocalCtrl); | 
|  | writel(io, ®s->ExtIo); | 
|  | mb(); | 
|  | return i; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Shortcut to read one word (4 bytes) out of the EEPROM and convert | 
|  | * it to our CPU byte-order. | 
|  | */ | 
|  | static u32 rr_read_eeprom_word(struct rr_private *rrpriv, | 
|  | size_t offset) | 
|  | { | 
|  | __be32 word; | 
|  |  | 
|  | if ((rr_read_eeprom(rrpriv, offset, | 
|  | (unsigned char *)&word, 4) == 4)) | 
|  | return be32_to_cpu(word); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Write a string to the EEPROM. | 
|  | * | 
|  | * This is only called when the firmware is not running. | 
|  | */ | 
|  | static unsigned int write_eeprom(struct rr_private *rrpriv, | 
|  | unsigned long offset, | 
|  | unsigned char *buf, | 
|  | unsigned long length) | 
|  | { | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  | u32 misc, io, data, i, j, ready, error = 0; | 
|  |  | 
|  | io = readl(®s->ExtIo); | 
|  | writel(0, ®s->ExtIo); | 
|  | misc = readl(®s->LocalCtrl); | 
|  | writel(ENABLE_EEPROM_WRITE, ®s->LocalCtrl); | 
|  | mb(); | 
|  |  | 
|  | for (i = 0; i < length; i++){ | 
|  | writel((EEPROM_BASE + ((offset+i) << 3)), ®s->WinBase); | 
|  | mb(); | 
|  | data = buf[i] << 24; | 
|  | /* | 
|  | * Only try to write the data if it is not the same | 
|  | * value already. | 
|  | */ | 
|  | if ((readl(®s->WinData) & 0xff000000) != data){ | 
|  | writel(data, ®s->WinData); | 
|  | ready = 0; | 
|  | j = 0; | 
|  | mb(); | 
|  | while(!ready){ | 
|  | udelay(20); | 
|  | if ((readl(®s->WinData) & 0xff000000) == | 
|  | data) | 
|  | ready = 1; | 
|  | mb(); | 
|  | if (j++ > 5000){ | 
|  | printk("data mismatch: %08x, " | 
|  | "WinData %08x\n", data, | 
|  | readl(®s->WinData)); | 
|  | ready = 1; | 
|  | error = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | writel(misc, ®s->LocalCtrl); | 
|  | writel(io, ®s->ExtIo); | 
|  | mb(); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit rr_init(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | u32 sram_size, rev; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | rev = readl(®s->FwRev); | 
|  | rrpriv->fw_rev = rev; | 
|  | if (rev > 0x00020024) | 
|  | printk("  Firmware revision: %i.%i.%i\n", (rev >> 16), | 
|  | ((rev >> 8) & 0xff), (rev & 0xff)); | 
|  | else if (rev >= 0x00020000) { | 
|  | printk("  Firmware revision: %i.%i.%i (2.0.37 or " | 
|  | "later is recommended)\n", (rev >> 16), | 
|  | ((rev >> 8) & 0xff), (rev & 0xff)); | 
|  | }else{ | 
|  | printk("  Firmware revision too old: %i.%i.%i, please " | 
|  | "upgrade to 2.0.37 or later.\n", | 
|  | (rev >> 16), ((rev >> 8) & 0xff), (rev & 0xff)); | 
|  | } | 
|  |  | 
|  | #if (DEBUG > 2) | 
|  | printk("  Maximum receive rings %i\n", readl(®s->MaxRxRng)); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Read the hardware address from the eeprom.  The HW address | 
|  | * is not really necessary for HIPPI but awfully convenient. | 
|  | * The pointer arithmetic to put it in dev_addr is ugly, but | 
|  | * Donald Becker does it this way for the GigE version of this | 
|  | * card and it's shorter and more portable than any | 
|  | * other method I've seen.  -VAL | 
|  | */ | 
|  |  | 
|  | *(__be16 *)(dev->dev_addr) = | 
|  | htons(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA))); | 
|  | *(__be32 *)(dev->dev_addr+2) = | 
|  | htonl(rr_read_eeprom_word(rrpriv, offsetof(struct eeprom, manf.BoardULA[4]))); | 
|  |  | 
|  | printk("  MAC: %pM\n", dev->dev_addr); | 
|  |  | 
|  | sram_size = rr_read_eeprom_word(rrpriv, 8); | 
|  | printk("  SRAM size 0x%06x\n", sram_size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int rr_init1(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | unsigned long myjif, flags; | 
|  | struct cmd cmd; | 
|  | u32 hostctrl; | 
|  | int ecode = 0; | 
|  | short i; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  |  | 
|  | hostctrl = readl(®s->HostCtrl); | 
|  | writel(hostctrl | HALT_NIC | RR_CLEAR_INT, ®s->HostCtrl); | 
|  | wmb(); | 
|  |  | 
|  | if (hostctrl & PARITY_ERR){ | 
|  | printk("%s: Parity error halting NIC - this is serious!\n", | 
|  | dev->name); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  | ecode = -EFAULT; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | set_rxaddr(regs, rrpriv->rx_ctrl_dma); | 
|  | set_infoaddr(regs, rrpriv->info_dma); | 
|  |  | 
|  | rrpriv->info->evt_ctrl.entry_size = sizeof(struct event); | 
|  | rrpriv->info->evt_ctrl.entries = EVT_RING_ENTRIES; | 
|  | rrpriv->info->evt_ctrl.mode = 0; | 
|  | rrpriv->info->evt_ctrl.pi = 0; | 
|  | set_rraddr(&rrpriv->info->evt_ctrl.rngptr, rrpriv->evt_ring_dma); | 
|  |  | 
|  | rrpriv->info->cmd_ctrl.entry_size = sizeof(struct cmd); | 
|  | rrpriv->info->cmd_ctrl.entries = CMD_RING_ENTRIES; | 
|  | rrpriv->info->cmd_ctrl.mode = 0; | 
|  | rrpriv->info->cmd_ctrl.pi = 15; | 
|  |  | 
|  | for (i = 0; i < CMD_RING_ENTRIES; i++) { | 
|  | writel(0, ®s->CmdRing[i]); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < TX_RING_ENTRIES; i++) { | 
|  | rrpriv->tx_ring[i].size = 0; | 
|  | set_rraddr(&rrpriv->tx_ring[i].addr, 0); | 
|  | rrpriv->tx_skbuff[i] = NULL; | 
|  | } | 
|  | rrpriv->info->tx_ctrl.entry_size = sizeof(struct tx_desc); | 
|  | rrpriv->info->tx_ctrl.entries = TX_RING_ENTRIES; | 
|  | rrpriv->info->tx_ctrl.mode = 0; | 
|  | rrpriv->info->tx_ctrl.pi = 0; | 
|  | set_rraddr(&rrpriv->info->tx_ctrl.rngptr, rrpriv->tx_ring_dma); | 
|  |  | 
|  | /* | 
|  | * Set dirty_tx before we start receiving interrupts, otherwise | 
|  | * the interrupt handler might think it is supposed to process | 
|  | * tx ints before we are up and running, which may cause a null | 
|  | * pointer access in the int handler. | 
|  | */ | 
|  | rrpriv->tx_full = 0; | 
|  | rrpriv->cur_rx = 0; | 
|  | rrpriv->dirty_rx = rrpriv->dirty_tx = 0; | 
|  |  | 
|  | rr_reset(dev); | 
|  |  | 
|  | /* Tuning values */ | 
|  | writel(0x5000, ®s->ConRetry); | 
|  | writel(0x100, ®s->ConRetryTmr); | 
|  | writel(0x500000, ®s->ConTmout); | 
|  | writel(0x60, ®s->IntrTmr); | 
|  | writel(0x500000, ®s->TxDataMvTimeout); | 
|  | writel(0x200000, ®s->RxDataMvTimeout); | 
|  | writel(0x80, ®s->WriteDmaThresh); | 
|  | writel(0x80, ®s->ReadDmaThresh); | 
|  |  | 
|  | rrpriv->fw_running = 0; | 
|  | wmb(); | 
|  |  | 
|  | hostctrl &= ~(HALT_NIC | INVALID_INST_B | PARITY_ERR); | 
|  | writel(hostctrl, ®s->HostCtrl); | 
|  | wmb(); | 
|  |  | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | for (i = 0; i < RX_RING_ENTRIES; i++) { | 
|  | struct sk_buff *skb; | 
|  | dma_addr_t addr; | 
|  |  | 
|  | rrpriv->rx_ring[i].mode = 0; | 
|  | skb = alloc_skb(dev->mtu + HIPPI_HLEN, GFP_ATOMIC); | 
|  | if (!skb) { | 
|  | printk(KERN_WARNING "%s: Unable to allocate memory " | 
|  | "for receive ring - halting NIC\n", dev->name); | 
|  | ecode = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  | rrpriv->rx_skbuff[i] = skb; | 
|  | addr = pci_map_single(rrpriv->pci_dev, skb->data, | 
|  | dev->mtu + HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
|  | /* | 
|  | * Sanity test to see if we conflict with the DMA | 
|  | * limitations of the Roadrunner. | 
|  | */ | 
|  | if ((((unsigned long)skb->data) & 0xfff) > ~65320) | 
|  | printk("skb alloc error\n"); | 
|  |  | 
|  | set_rraddr(&rrpriv->rx_ring[i].addr, addr); | 
|  | rrpriv->rx_ring[i].size = dev->mtu + HIPPI_HLEN; | 
|  | } | 
|  |  | 
|  | rrpriv->rx_ctrl[4].entry_size = sizeof(struct rx_desc); | 
|  | rrpriv->rx_ctrl[4].entries = RX_RING_ENTRIES; | 
|  | rrpriv->rx_ctrl[4].mode = 8; | 
|  | rrpriv->rx_ctrl[4].pi = 0; | 
|  | wmb(); | 
|  | set_rraddr(&rrpriv->rx_ctrl[4].rngptr, rrpriv->rx_ring_dma); | 
|  |  | 
|  | udelay(1000); | 
|  |  | 
|  | /* | 
|  | * Now start the FirmWare. | 
|  | */ | 
|  | cmd.code = C_START_FW; | 
|  | cmd.ring = 0; | 
|  | cmd.index = 0; | 
|  |  | 
|  | rr_issue_cmd(rrpriv, &cmd); | 
|  |  | 
|  | /* | 
|  | * Give the FirmWare time to chew on the `get running' command. | 
|  | */ | 
|  | myjif = jiffies + 5 * HZ; | 
|  | while (time_before(jiffies, myjif) && !rrpriv->fw_running) | 
|  | cpu_relax(); | 
|  |  | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | return ecode; | 
|  |  | 
|  | error: | 
|  | /* | 
|  | * We might have gotten here because we are out of memory, | 
|  | * make sure we release everything we allocated before failing | 
|  | */ | 
|  | for (i = 0; i < RX_RING_ENTRIES; i++) { | 
|  | struct sk_buff *skb = rrpriv->rx_skbuff[i]; | 
|  |  | 
|  | if (skb) { | 
|  | pci_unmap_single(rrpriv->pci_dev, | 
|  | rrpriv->rx_ring[i].addr.addrlo, | 
|  | dev->mtu + HIPPI_HLEN, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | rrpriv->rx_ring[i].size = 0; | 
|  | set_rraddr(&rrpriv->rx_ring[i].addr, 0); | 
|  | dev_kfree_skb(skb); | 
|  | rrpriv->rx_skbuff[i] = NULL; | 
|  | } | 
|  | } | 
|  | return ecode; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * All events are considered to be slow (RX/TX ints do not generate | 
|  | * events) and are handled here, outside the main interrupt handler, | 
|  | * to reduce the size of the handler. | 
|  | */ | 
|  | static u32 rr_handle_event(struct net_device *dev, u32 prodidx, u32 eidx) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | u32 tmp; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | while (prodidx != eidx){ | 
|  | switch (rrpriv->evt_ring[eidx].code){ | 
|  | case E_NIC_UP: | 
|  | tmp = readl(®s->FwRev); | 
|  | printk(KERN_INFO "%s: Firmware revision %i.%i.%i " | 
|  | "up and running\n", dev->name, | 
|  | (tmp >> 16), ((tmp >> 8) & 0xff), (tmp & 0xff)); | 
|  | rrpriv->fw_running = 1; | 
|  | writel(RX_RING_ENTRIES - 1, ®s->IpRxPi); | 
|  | wmb(); | 
|  | break; | 
|  | case E_LINK_ON: | 
|  | printk(KERN_INFO "%s: Optical link ON\n", dev->name); | 
|  | break; | 
|  | case E_LINK_OFF: | 
|  | printk(KERN_INFO "%s: Optical link OFF\n", dev->name); | 
|  | break; | 
|  | case E_RX_IDLE: | 
|  | printk(KERN_WARNING "%s: RX data not moving\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_WATCHDOG: | 
|  | printk(KERN_INFO "%s: The watchdog is here to see " | 
|  | "us\n", dev->name); | 
|  | break; | 
|  | case E_INTERN_ERR: | 
|  | printk(KERN_ERR "%s: HIPPI Internal NIC error\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_HOST_ERR: | 
|  | printk(KERN_ERR "%s: Host software error\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | /* | 
|  | * TX events. | 
|  | */ | 
|  | case E_CON_REJ: | 
|  | printk(KERN_WARNING "%s: Connection rejected\n", | 
|  | dev->name); | 
|  | dev->stats.tx_aborted_errors++; | 
|  | break; | 
|  | case E_CON_TMOUT: | 
|  | printk(KERN_WARNING "%s: Connection timeout\n", | 
|  | dev->name); | 
|  | break; | 
|  | case E_DISC_ERR: | 
|  | printk(KERN_WARNING "%s: HIPPI disconnect error\n", | 
|  | dev->name); | 
|  | dev->stats.tx_aborted_errors++; | 
|  | break; | 
|  | case E_INT_PRTY: | 
|  | printk(KERN_ERR "%s: HIPPI Internal Parity error\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_TX_IDLE: | 
|  | printk(KERN_WARNING "%s: Transmitter idle\n", | 
|  | dev->name); | 
|  | break; | 
|  | case E_TX_LINK_DROP: | 
|  | printk(KERN_WARNING "%s: Link lost during transmit\n", | 
|  | dev->name); | 
|  | dev->stats.tx_aborted_errors++; | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_TX_INV_RNG: | 
|  | printk(KERN_ERR "%s: Invalid send ring block\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_TX_INV_BUF: | 
|  | printk(KERN_ERR "%s: Invalid send buffer address\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_TX_INV_DSC: | 
|  | printk(KERN_ERR "%s: Invalid descriptor address\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | /* | 
|  | * RX events. | 
|  | */ | 
|  | case E_RX_RNG_OUT: | 
|  | printk(KERN_INFO "%s: Receive ring full\n", dev->name); | 
|  | break; | 
|  |  | 
|  | case E_RX_PAR_ERR: | 
|  | printk(KERN_WARNING "%s: Receive parity error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_RX_LLRC_ERR: | 
|  | printk(KERN_WARNING "%s: Receive LLRC error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_PKT_LN_ERR: | 
|  | printk(KERN_WARNING "%s: Receive packet length " | 
|  | "error\n", dev->name); | 
|  | goto drop; | 
|  | case E_DTA_CKSM_ERR: | 
|  | printk(KERN_WARNING "%s: Data checksum error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_SHT_BST: | 
|  | printk(KERN_WARNING "%s: Unexpected short burst " | 
|  | "error\n", dev->name); | 
|  | goto drop; | 
|  | case E_STATE_ERR: | 
|  | printk(KERN_WARNING "%s: Recv. state transition" | 
|  | " error\n", dev->name); | 
|  | goto drop; | 
|  | case E_UNEXP_DATA: | 
|  | printk(KERN_WARNING "%s: Unexpected data error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_LST_LNK_ERR: | 
|  | printk(KERN_WARNING "%s: Link lost error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_FRM_ERR: | 
|  | printk(KERN_WARNING "%s: Framming Error\n", | 
|  | dev->name); | 
|  | goto drop; | 
|  | case E_FLG_SYN_ERR: | 
|  | printk(KERN_WARNING "%s: Flag sync. lost during " | 
|  | "packet\n", dev->name); | 
|  | goto drop; | 
|  | case E_RX_INV_BUF: | 
|  | printk(KERN_ERR "%s: Invalid receive buffer " | 
|  | "address\n", dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_RX_INV_DSC: | 
|  | printk(KERN_ERR "%s: Invalid receive descriptor " | 
|  | "address\n", dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | case E_RNG_BLK: | 
|  | printk(KERN_ERR "%s: Invalid ring block\n", | 
|  | dev->name); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | wmb(); | 
|  | break; | 
|  | drop: | 
|  | /* Label packet to be dropped. | 
|  | * Actual dropping occurs in rx | 
|  | * handling. | 
|  | * | 
|  | * The index of packet we get to drop is | 
|  | * the index of the packet following | 
|  | * the bad packet. -kbf | 
|  | */ | 
|  | { | 
|  | u16 index = rrpriv->evt_ring[eidx].index; | 
|  | index = (index + (RX_RING_ENTRIES - 1)) % | 
|  | RX_RING_ENTRIES; | 
|  | rrpriv->rx_ring[index].mode |= | 
|  | (PACKET_BAD | PACKET_END); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | printk(KERN_WARNING "%s: Unhandled event 0x%02x\n", | 
|  | dev->name, rrpriv->evt_ring[eidx].code); | 
|  | } | 
|  | eidx = (eidx + 1) % EVT_RING_ENTRIES; | 
|  | } | 
|  |  | 
|  | rrpriv->info->evt_ctrl.pi = eidx; | 
|  | wmb(); | 
|  | return eidx; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void rx_int(struct net_device *dev, u32 rxlimit, u32 index) | 
|  | { | 
|  | struct rr_private *rrpriv = netdev_priv(dev); | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  |  | 
|  | do { | 
|  | struct rx_desc *desc; | 
|  | u32 pkt_len; | 
|  |  | 
|  | desc = &(rrpriv->rx_ring[index]); | 
|  | pkt_len = desc->size; | 
|  | #if (DEBUG > 2) | 
|  | printk("index %i, rxlimit %i\n", index, rxlimit); | 
|  | printk("len %x, mode %x\n", pkt_len, desc->mode); | 
|  | #endif | 
|  | if ( (rrpriv->rx_ring[index].mode & PACKET_BAD) == PACKET_BAD){ | 
|  | dev->stats.rx_dropped++; | 
|  | goto defer; | 
|  | } | 
|  |  | 
|  | if (pkt_len > 0){ | 
|  | struct sk_buff *skb, *rx_skb; | 
|  |  | 
|  | rx_skb = rrpriv->rx_skbuff[index]; | 
|  |  | 
|  | if (pkt_len < PKT_COPY_THRESHOLD) { | 
|  | skb = alloc_skb(pkt_len, GFP_ATOMIC); | 
|  | if (skb == NULL){ | 
|  | printk(KERN_WARNING "%s: Unable to allocate skb (%i bytes), deferring packet\n", dev->name, pkt_len); | 
|  | dev->stats.rx_dropped++; | 
|  | goto defer; | 
|  | } else { | 
|  | pci_dma_sync_single_for_cpu(rrpriv->pci_dev, | 
|  | desc->addr.addrlo, | 
|  | pkt_len, | 
|  | PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | memcpy(skb_put(skb, pkt_len), | 
|  | rx_skb->data, pkt_len); | 
|  |  | 
|  | pci_dma_sync_single_for_device(rrpriv->pci_dev, | 
|  | desc->addr.addrlo, | 
|  | pkt_len, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | } | 
|  | }else{ | 
|  | struct sk_buff *newskb; | 
|  |  | 
|  | newskb = alloc_skb(dev->mtu + HIPPI_HLEN, | 
|  | GFP_ATOMIC); | 
|  | if (newskb){ | 
|  | dma_addr_t addr; | 
|  |  | 
|  | pci_unmap_single(rrpriv->pci_dev, | 
|  | desc->addr.addrlo, dev->mtu + | 
|  | HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
|  | skb = rx_skb; | 
|  | skb_put(skb, pkt_len); | 
|  | rrpriv->rx_skbuff[index] = newskb; | 
|  | addr = pci_map_single(rrpriv->pci_dev, | 
|  | newskb->data, | 
|  | dev->mtu + HIPPI_HLEN, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | set_rraddr(&desc->addr, addr); | 
|  | } else { | 
|  | printk("%s: Out of memory, deferring " | 
|  | "packet\n", dev->name); | 
|  | dev->stats.rx_dropped++; | 
|  | goto defer; | 
|  | } | 
|  | } | 
|  | skb->protocol = hippi_type_trans(skb, dev); | 
|  |  | 
|  | netif_rx(skb);		/* send it up */ | 
|  |  | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += pkt_len; | 
|  | } | 
|  | defer: | 
|  | desc->mode = 0; | 
|  | desc->size = dev->mtu + HIPPI_HLEN; | 
|  |  | 
|  | if ((index & 7) == 7) | 
|  | writel(index, ®s->IpRxPi); | 
|  |  | 
|  | index = (index + 1) % RX_RING_ENTRIES; | 
|  | } while(index != rxlimit); | 
|  |  | 
|  | rrpriv->cur_rx = index; | 
|  | wmb(); | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t rr_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | struct net_device *dev = (struct net_device *)dev_id; | 
|  | u32 prodidx, rxindex, eidx, txcsmr, rxlimit, txcon; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | if (!(readl(®s->HostCtrl) & RR_INT)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | spin_lock(&rrpriv->lock); | 
|  |  | 
|  | prodidx = readl(®s->EvtPrd); | 
|  | txcsmr = (prodidx >> 8) & 0xff; | 
|  | rxlimit = (prodidx >> 16) & 0xff; | 
|  | prodidx &= 0xff; | 
|  |  | 
|  | #if (DEBUG > 2) | 
|  | printk("%s: interrupt, prodidx = %i, eidx = %i\n", dev->name, | 
|  | prodidx, rrpriv->info->evt_ctrl.pi); | 
|  | #endif | 
|  | /* | 
|  | * Order here is important.  We must handle events | 
|  | * before doing anything else in order to catch | 
|  | * such things as LLRC errors, etc -kbf | 
|  | */ | 
|  |  | 
|  | eidx = rrpriv->info->evt_ctrl.pi; | 
|  | if (prodidx != eidx) | 
|  | eidx = rr_handle_event(dev, prodidx, eidx); | 
|  |  | 
|  | rxindex = rrpriv->cur_rx; | 
|  | if (rxindex != rxlimit) | 
|  | rx_int(dev, rxlimit, rxindex); | 
|  |  | 
|  | txcon = rrpriv->dirty_tx; | 
|  | if (txcsmr != txcon) { | 
|  | do { | 
|  | /* Due to occational firmware TX producer/consumer out | 
|  | * of sync. error need to check entry in ring -kbf | 
|  | */ | 
|  | if(rrpriv->tx_skbuff[txcon]){ | 
|  | struct tx_desc *desc; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | desc = &(rrpriv->tx_ring[txcon]); | 
|  | skb = rrpriv->tx_skbuff[txcon]; | 
|  |  | 
|  | dev->stats.tx_packets++; | 
|  | dev->stats.tx_bytes += skb->len; | 
|  |  | 
|  | pci_unmap_single(rrpriv->pci_dev, | 
|  | desc->addr.addrlo, skb->len, | 
|  | PCI_DMA_TODEVICE); | 
|  | dev_kfree_skb_irq(skb); | 
|  |  | 
|  | rrpriv->tx_skbuff[txcon] = NULL; | 
|  | desc->size = 0; | 
|  | set_rraddr(&rrpriv->tx_ring[txcon].addr, 0); | 
|  | desc->mode = 0; | 
|  | } | 
|  | txcon = (txcon + 1) % TX_RING_ENTRIES; | 
|  | } while (txcsmr != txcon); | 
|  | wmb(); | 
|  |  | 
|  | rrpriv->dirty_tx = txcon; | 
|  | if (rrpriv->tx_full && rr_if_busy(dev) && | 
|  | (((rrpriv->info->tx_ctrl.pi + 1) % TX_RING_ENTRIES) | 
|  | != rrpriv->dirty_tx)){ | 
|  | rrpriv->tx_full = 0; | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | eidx |= ((txcsmr << 8) | (rxlimit << 16)); | 
|  | writel(eidx, ®s->EvtCon); | 
|  | wmb(); | 
|  |  | 
|  | spin_unlock(&rrpriv->lock); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static inline void rr_raz_tx(struct rr_private *rrpriv, | 
|  | struct net_device *dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < TX_RING_ENTRIES; i++) { | 
|  | struct sk_buff *skb = rrpriv->tx_skbuff[i]; | 
|  |  | 
|  | if (skb) { | 
|  | struct tx_desc *desc = &(rrpriv->tx_ring[i]); | 
|  |  | 
|  | pci_unmap_single(rrpriv->pci_dev, desc->addr.addrlo, | 
|  | skb->len, PCI_DMA_TODEVICE); | 
|  | desc->size = 0; | 
|  | set_rraddr(&desc->addr, 0); | 
|  | dev_kfree_skb(skb); | 
|  | rrpriv->tx_skbuff[i] = NULL; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void rr_raz_rx(struct rr_private *rrpriv, | 
|  | struct net_device *dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < RX_RING_ENTRIES; i++) { | 
|  | struct sk_buff *skb = rrpriv->rx_skbuff[i]; | 
|  |  | 
|  | if (skb) { | 
|  | struct rx_desc *desc = &(rrpriv->rx_ring[i]); | 
|  |  | 
|  | pci_unmap_single(rrpriv->pci_dev, desc->addr.addrlo, | 
|  | dev->mtu + HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
|  | desc->size = 0; | 
|  | set_rraddr(&desc->addr, 0); | 
|  | dev_kfree_skb(skb); | 
|  | rrpriv->rx_skbuff[i] = NULL; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rr_timer(unsigned long data) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)data; | 
|  | struct rr_private *rrpriv = netdev_priv(dev); | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (readl(®s->HostCtrl) & NIC_HALTED){ | 
|  | printk("%s: Restarting nic\n", dev->name); | 
|  | memset(rrpriv->rx_ctrl, 0, 256 * sizeof(struct ring_ctrl)); | 
|  | memset(rrpriv->info, 0, sizeof(struct rr_info)); | 
|  | wmb(); | 
|  |  | 
|  | rr_raz_tx(rrpriv, dev); | 
|  | rr_raz_rx(rrpriv, dev); | 
|  |  | 
|  | if (rr_init1(dev)) { | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
|  | ®s->HostCtrl); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  | } | 
|  | } | 
|  | rrpriv->timer.expires = RUN_AT(5*HZ); | 
|  | add_timer(&rrpriv->timer); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int rr_open(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv = netdev_priv(dev); | 
|  | struct pci_dev *pdev = rrpriv->pci_dev; | 
|  | struct rr_regs __iomem *regs; | 
|  | int ecode = 0; | 
|  | unsigned long flags; | 
|  | dma_addr_t dma_addr; | 
|  |  | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | if (rrpriv->fw_rev < 0x00020000) { | 
|  | printk(KERN_WARNING "%s: trying to configure device with " | 
|  | "obsolete firmware\n", dev->name); | 
|  | ecode = -EBUSY; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | rrpriv->rx_ctrl = pci_alloc_consistent(pdev, | 
|  | 256 * sizeof(struct ring_ctrl), | 
|  | &dma_addr); | 
|  | if (!rrpriv->rx_ctrl) { | 
|  | ecode = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  | rrpriv->rx_ctrl_dma = dma_addr; | 
|  | memset(rrpriv->rx_ctrl, 0, 256*sizeof(struct ring_ctrl)); | 
|  |  | 
|  | rrpriv->info = pci_alloc_consistent(pdev, sizeof(struct rr_info), | 
|  | &dma_addr); | 
|  | if (!rrpriv->info) { | 
|  | ecode = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  | rrpriv->info_dma = dma_addr; | 
|  | memset(rrpriv->info, 0, sizeof(struct rr_info)); | 
|  | wmb(); | 
|  |  | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, ®s->HostCtrl); | 
|  | readl(®s->HostCtrl); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | if (request_irq(pdev->irq, rr_interrupt, IRQF_SHARED, dev->name, dev)) { | 
|  | printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", | 
|  | dev->name, pdev->irq); | 
|  | ecode = -EAGAIN; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if ((ecode = rr_init1(dev))) | 
|  | goto error; | 
|  |  | 
|  | /* Set the timer to switch to check for link beat and perhaps switch | 
|  | to an alternate media type. */ | 
|  | init_timer(&rrpriv->timer); | 
|  | rrpriv->timer.expires = RUN_AT(5*HZ);           /* 5 sec. watchdog */ | 
|  | rrpriv->timer.data = (unsigned long)dev; | 
|  | rrpriv->timer.function = rr_timer;               /* timer handler */ | 
|  | add_timer(&rrpriv->timer); | 
|  |  | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | return ecode; | 
|  |  | 
|  | error: | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  | writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, ®s->HostCtrl); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | if (rrpriv->info) { | 
|  | pci_free_consistent(pdev, sizeof(struct rr_info), rrpriv->info, | 
|  | rrpriv->info_dma); | 
|  | rrpriv->info = NULL; | 
|  | } | 
|  | if (rrpriv->rx_ctrl) { | 
|  | pci_free_consistent(pdev, sizeof(struct ring_ctrl), | 
|  | rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); | 
|  | rrpriv->rx_ctrl = NULL; | 
|  | } | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | return ecode; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void rr_dump(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | u32 index, cons; | 
|  | short i; | 
|  | int len; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | printk("%s: dumping NIC TX rings\n", dev->name); | 
|  |  | 
|  | printk("RxPrd %08x, TxPrd %02x, EvtPrd %08x, TxPi %02x, TxCtrlPi %02x\n", | 
|  | readl(®s->RxPrd), readl(®s->TxPrd), | 
|  | readl(®s->EvtPrd), readl(®s->TxPi), | 
|  | rrpriv->info->tx_ctrl.pi); | 
|  |  | 
|  | printk("Error code 0x%x\n", readl(®s->Fail1)); | 
|  |  | 
|  | index = (((readl(®s->EvtPrd) >> 8) & 0xff) - 1) % TX_RING_ENTRIES; | 
|  | cons = rrpriv->dirty_tx; | 
|  | printk("TX ring index %i, TX consumer %i\n", | 
|  | index, cons); | 
|  |  | 
|  | if (rrpriv->tx_skbuff[index]){ | 
|  | len = min_t(int, 0x80, rrpriv->tx_skbuff[index]->len); | 
|  | printk("skbuff for index %i is valid - dumping data (0x%x bytes - DMA len 0x%x)\n", index, len, rrpriv->tx_ring[index].size); | 
|  | for (i = 0; i < len; i++){ | 
|  | if (!(i & 7)) | 
|  | printk("\n"); | 
|  | printk("%02x ", (unsigned char) rrpriv->tx_skbuff[index]->data[i]); | 
|  | } | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | if (rrpriv->tx_skbuff[cons]){ | 
|  | len = min_t(int, 0x80, rrpriv->tx_skbuff[cons]->len); | 
|  | printk("skbuff for cons %i is valid - dumping data (0x%x bytes - skbuff len 0x%x)\n", cons, len, rrpriv->tx_skbuff[cons]->len); | 
|  | printk("mode 0x%x, size 0x%x,\n phys %08Lx, skbuff-addr %08lx, truesize 0x%x\n", | 
|  | rrpriv->tx_ring[cons].mode, | 
|  | rrpriv->tx_ring[cons].size, | 
|  | (unsigned long long) rrpriv->tx_ring[cons].addr.addrlo, | 
|  | (unsigned long)rrpriv->tx_skbuff[cons]->data, | 
|  | (unsigned int)rrpriv->tx_skbuff[cons]->truesize); | 
|  | for (i = 0; i < len; i++){ | 
|  | if (!(i & 7)) | 
|  | printk("\n"); | 
|  | printk("%02x ", (unsigned char)rrpriv->tx_ring[cons].size); | 
|  | } | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | printk("dumping TX ring info:\n"); | 
|  | for (i = 0; i < TX_RING_ENTRIES; i++) | 
|  | printk("mode 0x%x, size 0x%x, phys-addr %08Lx\n", | 
|  | rrpriv->tx_ring[i].mode, | 
|  | rrpriv->tx_ring[i].size, | 
|  | (unsigned long long) rrpriv->tx_ring[i].addr.addrlo); | 
|  |  | 
|  | } | 
|  |  | 
|  |  | 
|  | static int rr_close(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv = netdev_priv(dev); | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  | struct pci_dev *pdev = rrpriv->pci_dev; | 
|  | unsigned long flags; | 
|  | u32 tmp; | 
|  | short i; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Lock to make sure we are not cleaning up while another CPU | 
|  | * is handling interrupts. | 
|  | */ | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  |  | 
|  | tmp = readl(®s->HostCtrl); | 
|  | if (tmp & NIC_HALTED){ | 
|  | printk("%s: NIC already halted\n", dev->name); | 
|  | rr_dump(dev); | 
|  | }else{ | 
|  | tmp |= HALT_NIC | RR_CLEAR_INT; | 
|  | writel(tmp, ®s->HostCtrl); | 
|  | readl(®s->HostCtrl); | 
|  | } | 
|  |  | 
|  | rrpriv->fw_running = 0; | 
|  |  | 
|  | del_timer_sync(&rrpriv->timer); | 
|  |  | 
|  | writel(0, ®s->TxPi); | 
|  | writel(0, ®s->IpRxPi); | 
|  |  | 
|  | writel(0, ®s->EvtCon); | 
|  | writel(0, ®s->EvtPrd); | 
|  |  | 
|  | for (i = 0; i < CMD_RING_ENTRIES; i++) | 
|  | writel(0, ®s->CmdRing[i]); | 
|  |  | 
|  | rrpriv->info->tx_ctrl.entries = 0; | 
|  | rrpriv->info->cmd_ctrl.pi = 0; | 
|  | rrpriv->info->evt_ctrl.pi = 0; | 
|  | rrpriv->rx_ctrl[4].entries = 0; | 
|  |  | 
|  | rr_raz_tx(rrpriv, dev); | 
|  | rr_raz_rx(rrpriv, dev); | 
|  |  | 
|  | pci_free_consistent(pdev, 256 * sizeof(struct ring_ctrl), | 
|  | rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); | 
|  | rrpriv->rx_ctrl = NULL; | 
|  |  | 
|  | pci_free_consistent(pdev, sizeof(struct rr_info), rrpriv->info, | 
|  | rrpriv->info_dma); | 
|  | rrpriv->info = NULL; | 
|  |  | 
|  | free_irq(pdev->irq, dev); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static netdev_tx_t rr_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv = netdev_priv(dev); | 
|  | struct rr_regs __iomem *regs = rrpriv->regs; | 
|  | struct hippi_cb *hcb = (struct hippi_cb *) skb->cb; | 
|  | struct ring_ctrl *txctrl; | 
|  | unsigned long flags; | 
|  | u32 index, len = skb->len; | 
|  | u32 *ifield; | 
|  | struct sk_buff *new_skb; | 
|  |  | 
|  | if (readl(®s->Mode) & FATAL_ERR) | 
|  | printk("error codes Fail1 %02x, Fail2 %02x\n", | 
|  | readl(®s->Fail1), readl(®s->Fail2)); | 
|  |  | 
|  | /* | 
|  | * We probably need to deal with tbusy here to prevent overruns. | 
|  | */ | 
|  |  | 
|  | if (skb_headroom(skb) < 8){ | 
|  | printk("incoming skb too small - reallocating\n"); | 
|  | if (!(new_skb = dev_alloc_skb(len + 8))) { | 
|  | dev_kfree_skb(skb); | 
|  | netif_wake_queue(dev); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | skb_reserve(new_skb, 8); | 
|  | skb_put(new_skb, len); | 
|  | skb_copy_from_linear_data(skb, new_skb->data, len); | 
|  | dev_kfree_skb(skb); | 
|  | skb = new_skb; | 
|  | } | 
|  |  | 
|  | ifield = (u32 *)skb_push(skb, 8); | 
|  |  | 
|  | ifield[0] = 0; | 
|  | ifield[1] = hcb->ifield; | 
|  |  | 
|  | /* | 
|  | * We don't need the lock before we are actually going to start | 
|  | * fiddling with the control blocks. | 
|  | */ | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  |  | 
|  | txctrl = &rrpriv->info->tx_ctrl; | 
|  |  | 
|  | index = txctrl->pi; | 
|  |  | 
|  | rrpriv->tx_skbuff[index] = skb; | 
|  | set_rraddr(&rrpriv->tx_ring[index].addr, pci_map_single( | 
|  | rrpriv->pci_dev, skb->data, len + 8, PCI_DMA_TODEVICE)); | 
|  | rrpriv->tx_ring[index].size = len + 8; /* include IFIELD */ | 
|  | rrpriv->tx_ring[index].mode = PACKET_START | PACKET_END; | 
|  | txctrl->pi = (index + 1) % TX_RING_ENTRIES; | 
|  | wmb(); | 
|  | writel(txctrl->pi, ®s->TxPi); | 
|  |  | 
|  | if (txctrl->pi == rrpriv->dirty_tx){ | 
|  | rrpriv->tx_full = 1; | 
|  | netif_stop_queue(dev); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Read the firmware out of the EEPROM and put it into the SRAM | 
|  | * (or from user space - later) | 
|  | * | 
|  | * This operation requires the NIC to be halted and is performed with | 
|  | * interrupts disabled and with the spinlock hold. | 
|  | */ | 
|  | static int rr_load_firmware(struct net_device *dev) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | struct rr_regs __iomem *regs; | 
|  | size_t eptr, segptr; | 
|  | int i, j; | 
|  | u32 localctrl, sptr, len, tmp; | 
|  | u32 p2len, p2size, nr_seg, revision, io, sram_size; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  | regs = rrpriv->regs; | 
|  |  | 
|  | if (dev->flags & IFF_UP) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (!(readl(®s->HostCtrl) & NIC_HALTED)){ | 
|  | printk("%s: Trying to load firmware to a running NIC.\n", | 
|  | dev->name); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | localctrl = readl(®s->LocalCtrl); | 
|  | writel(0, ®s->LocalCtrl); | 
|  |  | 
|  | writel(0, ®s->EvtPrd); | 
|  | writel(0, ®s->RxPrd); | 
|  | writel(0, ®s->TxPrd); | 
|  |  | 
|  | /* | 
|  | * First wipe the entire SRAM, otherwise we might run into all | 
|  | * kinds of trouble ... sigh, this took almost all afternoon | 
|  | * to track down ;-( | 
|  | */ | 
|  | io = readl(®s->ExtIo); | 
|  | writel(0, ®s->ExtIo); | 
|  | sram_size = rr_read_eeprom_word(rrpriv, 8); | 
|  |  | 
|  | for (i = 200; i < sram_size / 4; i++){ | 
|  | writel(i * 4, ®s->WinBase); | 
|  | mb(); | 
|  | writel(0, ®s->WinData); | 
|  | mb(); | 
|  | } | 
|  | writel(io, ®s->ExtIo); | 
|  | mb(); | 
|  |  | 
|  | eptr = rr_read_eeprom_word(rrpriv, | 
|  | offsetof(struct eeprom, rncd_info.AddrRunCodeSegs)); | 
|  | eptr = ((eptr & 0x1fffff) >> 3); | 
|  |  | 
|  | p2len = rr_read_eeprom_word(rrpriv, 0x83*4); | 
|  | p2len = (p2len << 2); | 
|  | p2size = rr_read_eeprom_word(rrpriv, 0x84*4); | 
|  | p2size = ((p2size & 0x1fffff) >> 3); | 
|  |  | 
|  | if ((eptr < p2size) || (eptr > (p2size + p2len))){ | 
|  | printk("%s: eptr is invalid\n", dev->name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | revision = rr_read_eeprom_word(rrpriv, | 
|  | offsetof(struct eeprom, manf.HeaderFmt)); | 
|  |  | 
|  | if (revision != 1){ | 
|  | printk("%s: invalid firmware format (%i)\n", | 
|  | dev->name, revision); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | nr_seg = rr_read_eeprom_word(rrpriv, eptr); | 
|  | eptr +=4; | 
|  | #if (DEBUG > 1) | 
|  | printk("%s: nr_seg %i\n", dev->name, nr_seg); | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < nr_seg; i++){ | 
|  | sptr = rr_read_eeprom_word(rrpriv, eptr); | 
|  | eptr += 4; | 
|  | len = rr_read_eeprom_word(rrpriv, eptr); | 
|  | eptr += 4; | 
|  | segptr = rr_read_eeprom_word(rrpriv, eptr); | 
|  | segptr = ((segptr & 0x1fffff) >> 3); | 
|  | eptr += 4; | 
|  | #if (DEBUG > 1) | 
|  | printk("%s: segment %i, sram address %06x, length %04x, segptr %06x\n", | 
|  | dev->name, i, sptr, len, segptr); | 
|  | #endif | 
|  | for (j = 0; j < len; j++){ | 
|  | tmp = rr_read_eeprom_word(rrpriv, segptr); | 
|  | writel(sptr, ®s->WinBase); | 
|  | mb(); | 
|  | writel(tmp, ®s->WinData); | 
|  | mb(); | 
|  | segptr += 4; | 
|  | sptr += 4; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | writel(localctrl, ®s->LocalCtrl); | 
|  | mb(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | struct rr_private *rrpriv; | 
|  | unsigned char *image, *oldimage; | 
|  | unsigned long flags; | 
|  | unsigned int i; | 
|  | int error = -EOPNOTSUPP; | 
|  |  | 
|  | rrpriv = netdev_priv(dev); | 
|  |  | 
|  | switch(cmd){ | 
|  | case SIOCRRGFW: | 
|  | if (!capable(CAP_SYS_RAWIO)){ | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | image = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
|  | if (!image) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (rrpriv->fw_running){ | 
|  | printk("%s: Firmware already running\n", dev->name); | 
|  | error = -EPERM; | 
|  | goto gf_out; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  | i = rr_read_eeprom(rrpriv, 0, image, EEPROM_BYTES); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  | if (i != EEPROM_BYTES){ | 
|  | printk(KERN_ERR "%s: Error reading EEPROM\n", | 
|  | dev->name); | 
|  | error = -EFAULT; | 
|  | goto gf_out; | 
|  | } | 
|  | error = copy_to_user(rq->ifr_data, image, EEPROM_BYTES); | 
|  | if (error) | 
|  | error = -EFAULT; | 
|  | gf_out: | 
|  | kfree(image); | 
|  | return error; | 
|  |  | 
|  | case SIOCRRPFW: | 
|  | if (!capable(CAP_SYS_RAWIO)){ | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | image = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
|  | oldimage = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
|  | if (!image || !oldimage) { | 
|  | error = -ENOMEM; | 
|  | goto wf_out; | 
|  | } | 
|  |  | 
|  | error = copy_from_user(image, rq->ifr_data, EEPROM_BYTES); | 
|  | if (error) { | 
|  | error = -EFAULT; | 
|  | goto wf_out; | 
|  | } | 
|  |  | 
|  | if (rrpriv->fw_running){ | 
|  | printk("%s: Firmware already running\n", dev->name); | 
|  | error = -EPERM; | 
|  | goto wf_out; | 
|  | } | 
|  |  | 
|  | printk("%s: Updating EEPROM firmware\n", dev->name); | 
|  |  | 
|  | spin_lock_irqsave(&rrpriv->lock, flags); | 
|  | error = write_eeprom(rrpriv, 0, image, EEPROM_BYTES); | 
|  | if (error) | 
|  | printk(KERN_ERR "%s: Error writing EEPROM\n", | 
|  | dev->name); | 
|  |  | 
|  | i = rr_read_eeprom(rrpriv, 0, oldimage, EEPROM_BYTES); | 
|  | spin_unlock_irqrestore(&rrpriv->lock, flags); | 
|  |  | 
|  | if (i != EEPROM_BYTES) | 
|  | printk(KERN_ERR "%s: Error reading back EEPROM " | 
|  | "image\n", dev->name); | 
|  |  | 
|  | error = memcmp(image, oldimage, EEPROM_BYTES); | 
|  | if (error){ | 
|  | printk(KERN_ERR "%s: Error verifying EEPROM image\n", | 
|  | dev->name); | 
|  | error = -EFAULT; | 
|  | } | 
|  | wf_out: | 
|  | kfree(oldimage); | 
|  | kfree(image); | 
|  | return error; | 
|  |  | 
|  | case SIOCRRID: | 
|  | return put_user(0x52523032, (int __user *)rq->ifr_data); | 
|  | default: | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | static DEFINE_PCI_DEVICE_TABLE(rr_pci_tbl) = { | 
|  | { PCI_VENDOR_ID_ESSENTIAL, PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER, | 
|  | PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0,} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, rr_pci_tbl); | 
|  |  | 
|  | static struct pci_driver rr_driver = { | 
|  | .name		= "rrunner", | 
|  | .id_table	= rr_pci_tbl, | 
|  | .probe		= rr_init_one, | 
|  | .remove		= __devexit_p(rr_remove_one), | 
|  | }; | 
|  |  | 
|  | static int __init rr_init_module(void) | 
|  | { | 
|  | return pci_register_driver(&rr_driver); | 
|  | } | 
|  |  | 
|  | static void __exit rr_cleanup_module(void) | 
|  | { | 
|  | pci_unregister_driver(&rr_driver); | 
|  | } | 
|  |  | 
|  | module_init(rr_init_module); | 
|  | module_exit(rr_cleanup_module); |