|  | /* | 
|  | * Generic HDLC support routines for Linux | 
|  | * X.25 support | 
|  | * | 
|  | * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License | 
|  | * as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/errno.h> | 
|  | #include <linux/gfp.h> | 
|  | #include <linux/hdlc.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/lapb.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pkt_sched.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <net/x25device.h> | 
|  |  | 
|  | static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); | 
|  |  | 
|  | /* These functions are callbacks called by LAPB layer */ | 
|  |  | 
|  | static void x25_connect_disconnect(struct net_device *dev, int reason, int code) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | unsigned char *ptr; | 
|  |  | 
|  | if ((skb = dev_alloc_skb(1)) == NULL) { | 
|  | netdev_err(dev, "out of memory\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ptr = skb_put(skb, 1); | 
|  | *ptr = code; | 
|  |  | 
|  | skb->protocol = x25_type_trans(skb, dev); | 
|  | netif_rx(skb); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void x25_connected(struct net_device *dev, int reason) | 
|  | { | 
|  | x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void x25_disconnected(struct net_device *dev, int reason) | 
|  | { | 
|  | x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) | 
|  | { | 
|  | unsigned char *ptr; | 
|  |  | 
|  | skb_push(skb, 1); | 
|  |  | 
|  | if (skb_cow(skb, 1)) | 
|  | return NET_RX_DROP; | 
|  |  | 
|  | ptr  = skb->data; | 
|  | *ptr = X25_IFACE_DATA; | 
|  |  | 
|  | skb->protocol = x25_type_trans(skb, dev); | 
|  | return netif_rx(skb); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb) | 
|  | { | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | hdlc->xmit(skb, dev); /* Ignore return value :-( */ | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | int result; | 
|  |  | 
|  |  | 
|  | /* X.25 to LAPB */ | 
|  | switch (skb->data[0]) { | 
|  | case X25_IFACE_DATA:	/* Data to be transmitted */ | 
|  | skb_pull(skb, 1); | 
|  | if ((result = lapb_data_request(dev, skb)) != LAPB_OK) | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | case X25_IFACE_CONNECT: | 
|  | if ((result = lapb_connect_request(dev))!= LAPB_OK) { | 
|  | if (result == LAPB_CONNECTED) | 
|  | /* Send connect confirm. msg to level 3 */ | 
|  | x25_connected(dev, 0); | 
|  | else | 
|  | netdev_err(dev, "LAPB connect request failed, error code = %i\n", | 
|  | result); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case X25_IFACE_DISCONNECT: | 
|  | if ((result = lapb_disconnect_request(dev)) != LAPB_OK) { | 
|  | if (result == LAPB_NOTCONNECTED) | 
|  | /* Send disconnect confirm. msg to level 3 */ | 
|  | x25_disconnected(dev, 0); | 
|  | else | 
|  | netdev_err(dev, "LAPB disconnect request failed, error code = %i\n", | 
|  | result); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default:		/* to be defined */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static int x25_open(struct net_device *dev) | 
|  | { | 
|  | int result; | 
|  | static const struct lapb_register_struct cb = { | 
|  | .connect_confirmation = x25_connected, | 
|  | .connect_indication = x25_connected, | 
|  | .disconnect_confirmation = x25_disconnected, | 
|  | .disconnect_indication = x25_disconnected, | 
|  | .data_indication = x25_data_indication, | 
|  | .data_transmit = x25_data_transmit, | 
|  | }; | 
|  |  | 
|  | result = lapb_register(dev, &cb); | 
|  | if (result != LAPB_OK) | 
|  | return result; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void x25_close(struct net_device *dev) | 
|  | { | 
|  | lapb_unregister(dev); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static int x25_rx(struct sk_buff *skb) | 
|  | { | 
|  | struct net_device *dev = skb->dev; | 
|  |  | 
|  | if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { | 
|  | dev->stats.rx_dropped++; | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  | if (lapb_data_received(dev, skb) == LAPB_OK) | 
|  | return NET_RX_SUCCESS; | 
|  |  | 
|  | dev->stats.rx_errors++; | 
|  | dev_kfree_skb_any(skb); | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct hdlc_proto proto = { | 
|  | .open		= x25_open, | 
|  | .close		= x25_close, | 
|  | .ioctl		= x25_ioctl, | 
|  | .netif_rx	= x25_rx, | 
|  | .xmit		= x25_xmit, | 
|  | .module		= THIS_MODULE, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) | 
|  | { | 
|  | hdlc_device *hdlc = dev_to_hdlc(dev); | 
|  | int result; | 
|  |  | 
|  | switch (ifr->ifr_settings.type) { | 
|  | case IF_GET_PROTO: | 
|  | if (dev_to_hdlc(dev)->proto != &proto) | 
|  | return -EINVAL; | 
|  | ifr->ifr_settings.type = IF_PROTO_X25; | 
|  | return 0; /* return protocol only, no settable parameters */ | 
|  |  | 
|  | case IF_PROTO_X25: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (dev->flags & IFF_UP) | 
|  | return -EBUSY; | 
|  |  | 
|  | result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | if ((result = attach_hdlc_protocol(dev, &proto, 0))) | 
|  | return result; | 
|  | dev->type = ARPHRD_X25; | 
|  | netif_dormant_off(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init mod_init(void) | 
|  | { | 
|  | register_hdlc_protocol(&proto); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static void __exit mod_exit(void) | 
|  | { | 
|  | unregister_hdlc_protocol(&proto); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(mod_init); | 
|  | module_exit(mod_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); | 
|  | MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); | 
|  | MODULE_LICENSE("GPL v2"); |