|  | /* | 
|  | * QLogic iSCSI HBA Driver | 
|  | * Copyright (c)  2003-2010 QLogic Corporation | 
|  | * | 
|  | * See LICENSE.qla4xxx for copyright and licensing details. | 
|  | */ | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/iscsi_boot_sysfs.h> | 
|  | #include <linux/inet.h> | 
|  |  | 
|  | #include <scsi/scsi_tcq.h> | 
|  | #include <scsi/scsicam.h> | 
|  |  | 
|  | #include "ql4_def.h" | 
|  | #include "ql4_version.h" | 
|  | #include "ql4_glbl.h" | 
|  | #include "ql4_dbg.h" | 
|  | #include "ql4_inline.h" | 
|  |  | 
|  | /* | 
|  | * Driver version | 
|  | */ | 
|  | static char qla4xxx_version_str[40]; | 
|  |  | 
|  | /* | 
|  | * SRB allocation cache | 
|  | */ | 
|  | static struct kmem_cache *srb_cachep; | 
|  |  | 
|  | /* | 
|  | * Module parameter information and variables | 
|  | */ | 
|  | static int ql4xdisablesysfsboot = 1; | 
|  | module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xdisablesysfsboot, | 
|  | " Set to disable exporting boot targets to sysfs.\n" | 
|  | "\t\t  0 - Export boot targets\n" | 
|  | "\t\t  1 - Do not export boot targets (Default)"); | 
|  |  | 
|  | int ql4xdontresethba; | 
|  | module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xdontresethba, | 
|  | " Don't reset the HBA for driver recovery.\n" | 
|  | "\t\t  0 - It will reset HBA (Default)\n" | 
|  | "\t\t  1 - It will NOT reset HBA"); | 
|  |  | 
|  | int ql4xextended_error_logging; | 
|  | module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xextended_error_logging, | 
|  | " Option to enable extended error logging.\n" | 
|  | "\t\t  0 - no logging (Default)\n" | 
|  | "\t\t  2 - debug logging"); | 
|  |  | 
|  | int ql4xenablemsix = 1; | 
|  | module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xenablemsix, | 
|  | " Set to enable MSI or MSI-X interrupt mechanism.\n" | 
|  | "\t\t  0 = enable INTx interrupt mechanism.\n" | 
|  | "\t\t  1 = enable MSI-X interrupt mechanism (Default).\n" | 
|  | "\t\t  2 = enable MSI interrupt mechanism."); | 
|  |  | 
|  | #define QL4_DEF_QDEPTH 32 | 
|  | static int ql4xmaxqdepth = QL4_DEF_QDEPTH; | 
|  | module_param(ql4xmaxqdepth, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xmaxqdepth, | 
|  | " Maximum queue depth to report for target devices.\n" | 
|  | "\t\t  Default: 32."); | 
|  |  | 
|  | static int ql4xqfulltracking = 1; | 
|  | module_param(ql4xqfulltracking, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xqfulltracking, | 
|  | " Enable or disable dynamic tracking and adjustment of\n" | 
|  | "\t\t scsi device queue depth.\n" | 
|  | "\t\t  0 - Disable.\n" | 
|  | "\t\t  1 - Enable. (Default)"); | 
|  |  | 
|  | static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; | 
|  | module_param(ql4xsess_recovery_tmo, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(ql4xsess_recovery_tmo, | 
|  | " Target Session Recovery Timeout.\n" | 
|  | "\t\t  Default: 120 sec."); | 
|  |  | 
|  | int ql4xmdcapmask = 0x1F; | 
|  | module_param(ql4xmdcapmask, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(ql4xmdcapmask, | 
|  | " Set the Minidump driver capture mask level.\n" | 
|  | "\t\t  Default is 0x1F.\n" | 
|  | "\t\t  Can be set to 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F"); | 
|  |  | 
|  | int ql4xenablemd = 1; | 
|  | module_param(ql4xenablemd, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ql4xenablemd, | 
|  | " Set to enable minidump.\n" | 
|  | "\t\t  0 - disable minidump\n" | 
|  | "\t\t  1 - enable minidump (Default)"); | 
|  |  | 
|  | static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); | 
|  | /* | 
|  | * SCSI host template entry points | 
|  | */ | 
|  | static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha); | 
|  |  | 
|  | /* | 
|  | * iSCSI template entry points | 
|  | */ | 
|  | static int qla4xxx_session_get_param(struct iscsi_cls_session *cls_sess, | 
|  | enum iscsi_param param, char *buf); | 
|  | static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn, | 
|  | enum iscsi_param param, char *buf); | 
|  | static int qla4xxx_host_get_param(struct Scsi_Host *shost, | 
|  | enum iscsi_host_param param, char *buf); | 
|  | static int qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, | 
|  | uint32_t len); | 
|  | static int qla4xxx_get_iface_param(struct iscsi_iface *iface, | 
|  | enum iscsi_param_type param_type, | 
|  | int param, char *buf); | 
|  | static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc); | 
|  | static struct iscsi_endpoint *qla4xxx_ep_connect(struct Scsi_Host *shost, | 
|  | struct sockaddr *dst_addr, | 
|  | int non_blocking); | 
|  | static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms); | 
|  | static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep); | 
|  | static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep, | 
|  | enum iscsi_param param, char *buf); | 
|  | static int qla4xxx_conn_start(struct iscsi_cls_conn *conn); | 
|  | static struct iscsi_cls_conn * | 
|  | qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx); | 
|  | static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session, | 
|  | struct iscsi_cls_conn *cls_conn, | 
|  | uint64_t transport_fd, int is_leading); | 
|  | static void qla4xxx_conn_destroy(struct iscsi_cls_conn *conn); | 
|  | static struct iscsi_cls_session * | 
|  | qla4xxx_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, | 
|  | uint16_t qdepth, uint32_t initial_cmdsn); | 
|  | static void qla4xxx_session_destroy(struct iscsi_cls_session *sess); | 
|  | static void qla4xxx_task_work(struct work_struct *wdata); | 
|  | static int qla4xxx_alloc_pdu(struct iscsi_task *, uint8_t); | 
|  | static int qla4xxx_task_xmit(struct iscsi_task *); | 
|  | static void qla4xxx_task_cleanup(struct iscsi_task *); | 
|  | static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session); | 
|  | static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn, | 
|  | struct iscsi_stats *stats); | 
|  | static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num, | 
|  | uint32_t iface_type, uint32_t payload_size, | 
|  | uint32_t pid, struct sockaddr *dst_addr); | 
|  | static int qla4xxx_get_chap_list(struct Scsi_Host *shost, uint16_t chap_tbl_idx, | 
|  | uint32_t *num_entries, char *buf); | 
|  | static int qla4xxx_delete_chap(struct Scsi_Host *shost, uint16_t chap_tbl_idx); | 
|  |  | 
|  | /* | 
|  | * SCSI host template entry points | 
|  | */ | 
|  | static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd); | 
|  | static int qla4xxx_eh_abort(struct scsi_cmnd *cmd); | 
|  | static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd); | 
|  | static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd); | 
|  | static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd); | 
|  | static int qla4xxx_slave_alloc(struct scsi_device *device); | 
|  | static int qla4xxx_slave_configure(struct scsi_device *device); | 
|  | static void qla4xxx_slave_destroy(struct scsi_device *sdev); | 
|  | static umode_t ql4_attr_is_visible(int param_type, int param); | 
|  | static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type); | 
|  | static int qla4xxx_change_queue_depth(struct scsi_device *sdev, int qdepth, | 
|  | int reason); | 
|  |  | 
|  | static struct qla4_8xxx_legacy_intr_set legacy_intr[] = | 
|  | QLA82XX_LEGACY_INTR_CONFIG; | 
|  |  | 
|  | static struct scsi_host_template qla4xxx_driver_template = { | 
|  | .module			= THIS_MODULE, | 
|  | .name			= DRIVER_NAME, | 
|  | .proc_name		= DRIVER_NAME, | 
|  | .queuecommand		= qla4xxx_queuecommand, | 
|  |  | 
|  | .eh_abort_handler	= qla4xxx_eh_abort, | 
|  | .eh_device_reset_handler = qla4xxx_eh_device_reset, | 
|  | .eh_target_reset_handler = qla4xxx_eh_target_reset, | 
|  | .eh_host_reset_handler	= qla4xxx_eh_host_reset, | 
|  | .eh_timed_out		= qla4xxx_eh_cmd_timed_out, | 
|  |  | 
|  | .slave_configure	= qla4xxx_slave_configure, | 
|  | .slave_alloc		= qla4xxx_slave_alloc, | 
|  | .slave_destroy		= qla4xxx_slave_destroy, | 
|  | .change_queue_depth	= qla4xxx_change_queue_depth, | 
|  |  | 
|  | .this_id		= -1, | 
|  | .cmd_per_lun		= 3, | 
|  | .use_clustering		= ENABLE_CLUSTERING, | 
|  | .sg_tablesize		= SG_ALL, | 
|  |  | 
|  | .max_sectors		= 0xFFFF, | 
|  | .shost_attrs		= qla4xxx_host_attrs, | 
|  | .host_reset		= qla4xxx_host_reset, | 
|  | .vendor_id		= SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC, | 
|  | }; | 
|  |  | 
|  | static struct iscsi_transport qla4xxx_iscsi_transport = { | 
|  | .owner			= THIS_MODULE, | 
|  | .name			= DRIVER_NAME, | 
|  | .caps			= CAP_TEXT_NEGO | | 
|  | CAP_DATA_PATH_OFFLOAD | CAP_HDRDGST | | 
|  | CAP_DATADGST | CAP_LOGIN_OFFLOAD | | 
|  | CAP_MULTI_R2T, | 
|  | .attr_is_visible	= ql4_attr_is_visible, | 
|  | .create_session         = qla4xxx_session_create, | 
|  | .destroy_session        = qla4xxx_session_destroy, | 
|  | .start_conn             = qla4xxx_conn_start, | 
|  | .create_conn            = qla4xxx_conn_create, | 
|  | .bind_conn              = qla4xxx_conn_bind, | 
|  | .stop_conn              = iscsi_conn_stop, | 
|  | .destroy_conn           = qla4xxx_conn_destroy, | 
|  | .set_param              = iscsi_set_param, | 
|  | .get_conn_param		= qla4xxx_conn_get_param, | 
|  | .get_session_param	= qla4xxx_session_get_param, | 
|  | .get_ep_param           = qla4xxx_get_ep_param, | 
|  | .ep_connect		= qla4xxx_ep_connect, | 
|  | .ep_poll		= qla4xxx_ep_poll, | 
|  | .ep_disconnect		= qla4xxx_ep_disconnect, | 
|  | .get_stats		= qla4xxx_conn_get_stats, | 
|  | .send_pdu		= iscsi_conn_send_pdu, | 
|  | .xmit_task		= qla4xxx_task_xmit, | 
|  | .cleanup_task		= qla4xxx_task_cleanup, | 
|  | .alloc_pdu		= qla4xxx_alloc_pdu, | 
|  |  | 
|  | .get_host_param		= qla4xxx_host_get_param, | 
|  | .set_iface_param	= qla4xxx_iface_set_param, | 
|  | .get_iface_param	= qla4xxx_get_iface_param, | 
|  | .bsg_request		= qla4xxx_bsg_request, | 
|  | .send_ping		= qla4xxx_send_ping, | 
|  | .get_chap		= qla4xxx_get_chap_list, | 
|  | .delete_chap		= qla4xxx_delete_chap, | 
|  | }; | 
|  |  | 
|  | static struct scsi_transport_template *qla4xxx_scsi_transport; | 
|  |  | 
|  | static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num, | 
|  | uint32_t iface_type, uint32_t payload_size, | 
|  | uint32_t pid, struct sockaddr *dst_addr) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | struct sockaddr_in *addr; | 
|  | struct sockaddr_in6 *addr6; | 
|  | uint32_t options = 0; | 
|  | uint8_t ipaddr[IPv6_ADDR_LEN]; | 
|  | int rval; | 
|  |  | 
|  | memset(ipaddr, 0, IPv6_ADDR_LEN); | 
|  | /* IPv4 to IPv4 */ | 
|  | if ((iface_type == ISCSI_IFACE_TYPE_IPV4) && | 
|  | (dst_addr->sa_family == AF_INET)) { | 
|  | addr = (struct sockaddr_in *)dst_addr; | 
|  | memcpy(ipaddr, &addr->sin_addr.s_addr, IP_ADDR_LEN); | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv4 Ping src: %pI4 " | 
|  | "dest: %pI4\n", __func__, | 
|  | &ha->ip_config.ip_address, ipaddr)); | 
|  | rval = qla4xxx_ping_iocb(ha, options, payload_size, pid, | 
|  | ipaddr); | 
|  | if (rval) | 
|  | rval = -EINVAL; | 
|  | } else if ((iface_type == ISCSI_IFACE_TYPE_IPV6) && | 
|  | (dst_addr->sa_family == AF_INET6)) { | 
|  | /* IPv6 to IPv6 */ | 
|  | addr6 = (struct sockaddr_in6 *)dst_addr; | 
|  | memcpy(ipaddr, &addr6->sin6_addr.in6_u.u6_addr8, IPv6_ADDR_LEN); | 
|  |  | 
|  | options |= PING_IPV6_PROTOCOL_ENABLE; | 
|  |  | 
|  | /* Ping using LinkLocal address */ | 
|  | if ((iface_num == 0) || (iface_num == 1)) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: LinkLocal Ping " | 
|  | "src: %pI6 dest: %pI6\n", __func__, | 
|  | &ha->ip_config.ipv6_link_local_addr, | 
|  | ipaddr)); | 
|  | options |= PING_IPV6_LINKLOCAL_ADDR; | 
|  | rval = qla4xxx_ping_iocb(ha, options, payload_size, | 
|  | pid, ipaddr); | 
|  | } else { | 
|  | ql4_printk(KERN_WARNING, ha, "%s: iface num = %d " | 
|  | "not supported\n", __func__, iface_num); | 
|  | rval = -ENOSYS; | 
|  | goto exit_send_ping; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If ping using LinkLocal address fails, try ping using | 
|  | * IPv6 address | 
|  | */ | 
|  | if (rval != QLA_SUCCESS) { | 
|  | options &= ~PING_IPV6_LINKLOCAL_ADDR; | 
|  | if (iface_num == 0) { | 
|  | options |= PING_IPV6_ADDR0; | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 " | 
|  | "Ping src: %pI6 " | 
|  | "dest: %pI6\n", __func__, | 
|  | &ha->ip_config.ipv6_addr0, | 
|  | ipaddr)); | 
|  | } else if (iface_num == 1) { | 
|  | options |= PING_IPV6_ADDR1; | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 " | 
|  | "Ping src: %pI6 " | 
|  | "dest: %pI6\n", __func__, | 
|  | &ha->ip_config.ipv6_addr1, | 
|  | ipaddr)); | 
|  | } | 
|  | rval = qla4xxx_ping_iocb(ha, options, payload_size, | 
|  | pid, ipaddr); | 
|  | if (rval) | 
|  | rval = -EINVAL; | 
|  | } | 
|  | } else | 
|  | rval = -ENOSYS; | 
|  | exit_send_ping: | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | static umode_t ql4_attr_is_visible(int param_type, int param) | 
|  | { | 
|  | switch (param_type) { | 
|  | case ISCSI_HOST_PARAM: | 
|  | switch (param) { | 
|  | case ISCSI_HOST_PARAM_HWADDRESS: | 
|  | case ISCSI_HOST_PARAM_IPADDRESS: | 
|  | case ISCSI_HOST_PARAM_INITIATOR_NAME: | 
|  | case ISCSI_HOST_PARAM_PORT_STATE: | 
|  | case ISCSI_HOST_PARAM_PORT_SPEED: | 
|  | return S_IRUGO; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | case ISCSI_PARAM: | 
|  | switch (param) { | 
|  | case ISCSI_PARAM_PERSISTENT_ADDRESS: | 
|  | case ISCSI_PARAM_PERSISTENT_PORT: | 
|  | case ISCSI_PARAM_CONN_ADDRESS: | 
|  | case ISCSI_PARAM_CONN_PORT: | 
|  | case ISCSI_PARAM_TARGET_NAME: | 
|  | case ISCSI_PARAM_TPGT: | 
|  | case ISCSI_PARAM_TARGET_ALIAS: | 
|  | case ISCSI_PARAM_MAX_BURST: | 
|  | case ISCSI_PARAM_MAX_R2T: | 
|  | case ISCSI_PARAM_FIRST_BURST: | 
|  | case ISCSI_PARAM_MAX_RECV_DLENGTH: | 
|  | case ISCSI_PARAM_MAX_XMIT_DLENGTH: | 
|  | case ISCSI_PARAM_IFACE_NAME: | 
|  | case ISCSI_PARAM_CHAP_OUT_IDX: | 
|  | case ISCSI_PARAM_CHAP_IN_IDX: | 
|  | case ISCSI_PARAM_USERNAME: | 
|  | case ISCSI_PARAM_PASSWORD: | 
|  | case ISCSI_PARAM_USERNAME_IN: | 
|  | case ISCSI_PARAM_PASSWORD_IN: | 
|  | return S_IRUGO; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | case ISCSI_NET_PARAM: | 
|  | switch (param) { | 
|  | case ISCSI_NET_PARAM_IPV4_ADDR: | 
|  | case ISCSI_NET_PARAM_IPV4_SUBNET: | 
|  | case ISCSI_NET_PARAM_IPV4_GW: | 
|  | case ISCSI_NET_PARAM_IPV4_BOOTPROTO: | 
|  | case ISCSI_NET_PARAM_IFACE_ENABLE: | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL: | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR: | 
|  | case ISCSI_NET_PARAM_IPV6_ROUTER: | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG: | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG: | 
|  | case ISCSI_NET_PARAM_VLAN_ID: | 
|  | case ISCSI_NET_PARAM_VLAN_PRIORITY: | 
|  | case ISCSI_NET_PARAM_VLAN_ENABLED: | 
|  | case ISCSI_NET_PARAM_MTU: | 
|  | case ISCSI_NET_PARAM_PORT: | 
|  | return S_IRUGO; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_get_chap_list(struct Scsi_Host *shost, uint16_t chap_tbl_idx, | 
|  | uint32_t *num_entries, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | struct ql4_chap_table *chap_table; | 
|  | struct iscsi_chap_rec *chap_rec; | 
|  | int max_chap_entries = 0; | 
|  | int valid_chap_entries = 0; | 
|  | int ret = 0, i; | 
|  |  | 
|  | if (is_qla8022(ha)) | 
|  | max_chap_entries = (ha->hw.flt_chap_size / 2) / | 
|  | sizeof(struct ql4_chap_table); | 
|  | else | 
|  | max_chap_entries = MAX_CHAP_ENTRIES_40XX; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, "%s: num_entries = %d, CHAP idx = %d\n", | 
|  | __func__, *num_entries, chap_tbl_idx); | 
|  |  | 
|  | if (!buf) { | 
|  | ret = -ENOMEM; | 
|  | goto exit_get_chap_list; | 
|  | } | 
|  |  | 
|  | chap_rec = (struct iscsi_chap_rec *) buf; | 
|  | mutex_lock(&ha->chap_sem); | 
|  | for (i = chap_tbl_idx; i < max_chap_entries; i++) { | 
|  | chap_table = (struct ql4_chap_table *)ha->chap_list + i; | 
|  | if (chap_table->cookie != | 
|  | __constant_cpu_to_le16(CHAP_VALID_COOKIE)) | 
|  | continue; | 
|  |  | 
|  | chap_rec->chap_tbl_idx = i; | 
|  | strncpy(chap_rec->username, chap_table->name, | 
|  | ISCSI_CHAP_AUTH_NAME_MAX_LEN); | 
|  | strncpy(chap_rec->password, chap_table->secret, | 
|  | QL4_CHAP_MAX_SECRET_LEN); | 
|  | chap_rec->password_length = chap_table->secret_len; | 
|  |  | 
|  | if (chap_table->flags & BIT_7) /* local */ | 
|  | chap_rec->chap_type = CHAP_TYPE_OUT; | 
|  |  | 
|  | if (chap_table->flags & BIT_6) /* peer */ | 
|  | chap_rec->chap_type = CHAP_TYPE_IN; | 
|  |  | 
|  | chap_rec++; | 
|  |  | 
|  | valid_chap_entries++; | 
|  | if (valid_chap_entries == *num_entries) | 
|  | break; | 
|  | else | 
|  | continue; | 
|  | } | 
|  | mutex_unlock(&ha->chap_sem); | 
|  |  | 
|  | exit_get_chap_list: | 
|  | ql4_printk(KERN_INFO, ha, "%s: Valid CHAP Entries = %d\n", | 
|  | __func__,  valid_chap_entries); | 
|  | *num_entries = valid_chap_entries; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __qla4xxx_is_chap_active(struct device *dev, void *data) | 
|  | { | 
|  | int ret = 0; | 
|  | uint16_t *chap_tbl_idx = (uint16_t *) data; | 
|  | struct iscsi_cls_session *cls_session; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  |  | 
|  | if (!iscsi_is_session_dev(dev)) | 
|  | goto exit_is_chap_active; | 
|  |  | 
|  | cls_session = iscsi_dev_to_session(dev); | 
|  | sess = cls_session->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  |  | 
|  | if (iscsi_session_chkready(cls_session)) | 
|  | goto exit_is_chap_active; | 
|  |  | 
|  | if (ddb_entry->chap_tbl_idx == *chap_tbl_idx) | 
|  | ret = 1; | 
|  |  | 
|  | exit_is_chap_active: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_is_chap_active(struct Scsi_Host *shost, | 
|  | uint16_t chap_tbl_idx) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | ret = device_for_each_child(&shost->shost_gendev, &chap_tbl_idx, | 
|  | __qla4xxx_is_chap_active); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_delete_chap(struct Scsi_Host *shost, uint16_t chap_tbl_idx) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | struct ql4_chap_table *chap_table; | 
|  | dma_addr_t chap_dma; | 
|  | int max_chap_entries = 0; | 
|  | uint32_t offset = 0; | 
|  | uint32_t chap_size; | 
|  | int ret = 0; | 
|  |  | 
|  | chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); | 
|  | if (chap_table == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(chap_table, 0, sizeof(struct ql4_chap_table)); | 
|  |  | 
|  | if (is_qla8022(ha)) | 
|  | max_chap_entries = (ha->hw.flt_chap_size / 2) / | 
|  | sizeof(struct ql4_chap_table); | 
|  | else | 
|  | max_chap_entries = MAX_CHAP_ENTRIES_40XX; | 
|  |  | 
|  | if (chap_tbl_idx > max_chap_entries) { | 
|  | ret = -EINVAL; | 
|  | goto exit_delete_chap; | 
|  | } | 
|  |  | 
|  | /* Check if chap index is in use. | 
|  | * If chap is in use don't delet chap entry */ | 
|  | ret = qla4xxx_is_chap_active(shost, chap_tbl_idx); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_INFO, ha, "CHAP entry %d is in use, cannot " | 
|  | "delete from flash\n", chap_tbl_idx); | 
|  | ret = -EBUSY; | 
|  | goto exit_delete_chap; | 
|  | } | 
|  |  | 
|  | chap_size = sizeof(struct ql4_chap_table); | 
|  | if (is_qla40XX(ha)) | 
|  | offset = FLASH_CHAP_OFFSET | (chap_tbl_idx * chap_size); | 
|  | else { | 
|  | offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2); | 
|  | /* flt_chap_size is CHAP table size for both ports | 
|  | * so divide it by 2 to calculate the offset for second port | 
|  | */ | 
|  | if (ha->port_num == 1) | 
|  | offset += (ha->hw.flt_chap_size / 2); | 
|  | offset += (chap_tbl_idx * chap_size); | 
|  | } | 
|  |  | 
|  | ret = qla4xxx_get_flash(ha, chap_dma, offset, chap_size); | 
|  | if (ret != QLA_SUCCESS) { | 
|  | ret = -EINVAL; | 
|  | goto exit_delete_chap; | 
|  | } | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n", | 
|  | __le16_to_cpu(chap_table->cookie))); | 
|  |  | 
|  | if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) { | 
|  | ql4_printk(KERN_ERR, ha, "No valid chap entry found\n"); | 
|  | goto exit_delete_chap; | 
|  | } | 
|  |  | 
|  | chap_table->cookie = __constant_cpu_to_le16(0xFFFF); | 
|  |  | 
|  | offset = FLASH_CHAP_OFFSET | | 
|  | (chap_tbl_idx * sizeof(struct ql4_chap_table)); | 
|  | ret = qla4xxx_set_flash(ha, chap_dma, offset, chap_size, | 
|  | FLASH_OPT_RMW_COMMIT); | 
|  | if (ret == QLA_SUCCESS && ha->chap_list) { | 
|  | mutex_lock(&ha->chap_sem); | 
|  | /* Update ha chap_list cache */ | 
|  | memcpy((struct ql4_chap_table *)ha->chap_list + chap_tbl_idx, | 
|  | chap_table, sizeof(struct ql4_chap_table)); | 
|  | mutex_unlock(&ha->chap_sem); | 
|  | } | 
|  | if (ret != QLA_SUCCESS) | 
|  | ret =  -EINVAL; | 
|  |  | 
|  | exit_delete_chap: | 
|  | dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_get_iface_param(struct iscsi_iface *iface, | 
|  | enum iscsi_param_type param_type, | 
|  | int param, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = iscsi_iface_to_shost(iface); | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | int len = -ENOSYS; | 
|  |  | 
|  | if (param_type != ISCSI_NET_PARAM) | 
|  | return -ENOSYS; | 
|  |  | 
|  | switch (param) { | 
|  | case ISCSI_NET_PARAM_IPV4_ADDR: | 
|  | len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_SUBNET: | 
|  | len = sprintf(buf, "%pI4\n", &ha->ip_config.subnet_mask); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_GW: | 
|  | len = sprintf(buf, "%pI4\n", &ha->ip_config.gateway); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IFACE_ENABLE: | 
|  | if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv4_options & | 
|  | IPOPT_IPV4_PROTOCOL_ENABLE) ? | 
|  | "enabled" : "disabled"); | 
|  | else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv6_options & | 
|  | IPV6_OPT_IPV6_PROTOCOL_ENABLE) ? | 
|  | "enabled" : "disabled"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_BOOTPROTO: | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.tcp_options & TCPOPT_DHCP_ENABLE) ? | 
|  | "dhcp" : "static"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR: | 
|  | if (iface->iface_num == 0) | 
|  | len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr0); | 
|  | if (iface->iface_num == 1) | 
|  | len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr1); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL: | 
|  | len = sprintf(buf, "%pI6\n", | 
|  | &ha->ip_config.ipv6_link_local_addr); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ROUTER: | 
|  | len = sprintf(buf, "%pI6\n", | 
|  | &ha->ip_config.ipv6_default_router_addr); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG: | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv6_addl_options & | 
|  | IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) ? | 
|  | "nd" : "static"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG: | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv6_addl_options & | 
|  | IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR) ? | 
|  | "auto" : "static"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_ID: | 
|  | if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) | 
|  | len = sprintf(buf, "%d\n", | 
|  | (ha->ip_config.ipv4_vlan_tag & | 
|  | ISCSI_MAX_VLAN_ID)); | 
|  | else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) | 
|  | len = sprintf(buf, "%d\n", | 
|  | (ha->ip_config.ipv6_vlan_tag & | 
|  | ISCSI_MAX_VLAN_ID)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_PRIORITY: | 
|  | if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) | 
|  | len = sprintf(buf, "%d\n", | 
|  | ((ha->ip_config.ipv4_vlan_tag >> 13) & | 
|  | ISCSI_MAX_VLAN_PRIORITY)); | 
|  | else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) | 
|  | len = sprintf(buf, "%d\n", | 
|  | ((ha->ip_config.ipv6_vlan_tag >> 13) & | 
|  | ISCSI_MAX_VLAN_PRIORITY)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_ENABLED: | 
|  | if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv4_options & | 
|  | IPOPT_VLAN_TAGGING_ENABLE) ? | 
|  | "enabled" : "disabled"); | 
|  | else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) | 
|  | len = sprintf(buf, "%s\n", | 
|  | (ha->ip_config.ipv6_options & | 
|  | IPV6_OPT_VLAN_TAGGING_ENABLE) ? | 
|  | "enabled" : "disabled"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_MTU: | 
|  | len = sprintf(buf, "%d\n", ha->ip_config.eth_mtu_size); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_PORT: | 
|  | if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) | 
|  | len = sprintf(buf, "%d\n", ha->ip_config.ipv4_port); | 
|  | else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) | 
|  | len = sprintf(buf, "%d\n", ha->ip_config.ipv6_port); | 
|  | break; | 
|  | default: | 
|  | len = -ENOSYS; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct iscsi_endpoint * | 
|  | qla4xxx_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, | 
|  | int non_blocking) | 
|  | { | 
|  | int ret; | 
|  | struct iscsi_endpoint *ep; | 
|  | struct qla_endpoint *qla_ep; | 
|  | struct scsi_qla_host *ha; | 
|  | struct sockaddr_in *addr; | 
|  | struct sockaddr_in6 *addr6; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | if (!shost) { | 
|  | ret = -ENXIO; | 
|  | printk(KERN_ERR "%s: shost is NULL\n", | 
|  | __func__); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | ha = iscsi_host_priv(shost); | 
|  |  | 
|  | ep = iscsi_create_endpoint(sizeof(struct qla_endpoint)); | 
|  | if (!ep) { | 
|  | ret = -ENOMEM; | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | qla_ep = ep->dd_data; | 
|  | memset(qla_ep, 0, sizeof(struct qla_endpoint)); | 
|  | if (dst_addr->sa_family == AF_INET) { | 
|  | memcpy(&qla_ep->dst_addr, dst_addr, sizeof(struct sockaddr_in)); | 
|  | addr = (struct sockaddr_in *)&qla_ep->dst_addr; | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI4\n", __func__, | 
|  | (char *)&addr->sin_addr)); | 
|  | } else if (dst_addr->sa_family == AF_INET6) { | 
|  | memcpy(&qla_ep->dst_addr, dst_addr, | 
|  | sizeof(struct sockaddr_in6)); | 
|  | addr6 = (struct sockaddr_in6 *)&qla_ep->dst_addr; | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI6\n", __func__, | 
|  | (char *)&addr6->sin6_addr)); | 
|  | } | 
|  |  | 
|  | qla_ep->host = shost; | 
|  |  | 
|  | return ep; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) | 
|  | { | 
|  | struct qla_endpoint *qla_ep; | 
|  | struct scsi_qla_host *ha; | 
|  | int ret = 0; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | qla_ep = ep->dd_data; | 
|  | ha = to_qla_host(qla_ep->host); | 
|  |  | 
|  | if (adapter_up(ha) && !test_bit(AF_BUILD_DDB_LIST, &ha->flags)) | 
|  | ret = 1; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep) | 
|  | { | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | iscsi_destroy_endpoint(ep); | 
|  | } | 
|  |  | 
|  | static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep, | 
|  | enum iscsi_param param, | 
|  | char *buf) | 
|  | { | 
|  | struct qla_endpoint *qla_ep = ep->dd_data; | 
|  | struct sockaddr *dst_addr; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  |  | 
|  | switch (param) { | 
|  | case ISCSI_PARAM_CONN_PORT: | 
|  | case ISCSI_PARAM_CONN_ADDRESS: | 
|  | if (!qla_ep) | 
|  | return -ENOTCONN; | 
|  |  | 
|  | dst_addr = (struct sockaddr *)&qla_ep->dst_addr; | 
|  | if (!dst_addr) | 
|  | return -ENOTCONN; | 
|  |  | 
|  | return iscsi_conn_get_addr_param((struct sockaddr_storage *) | 
|  | &qla_ep->dst_addr, param, buf); | 
|  | default: | 
|  | return -ENOSYS; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn, | 
|  | struct iscsi_stats *stats) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  | struct ql_iscsi_stats *ql_iscsi_stats; | 
|  | int stats_size; | 
|  | int ret; | 
|  | dma_addr_t iscsi_stats_dma; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  |  | 
|  | cls_sess = iscsi_conn_to_session(cls_conn); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | stats_size = PAGE_ALIGN(sizeof(struct ql_iscsi_stats)); | 
|  | /* Allocate memory */ | 
|  | ql_iscsi_stats = dma_alloc_coherent(&ha->pdev->dev, stats_size, | 
|  | &iscsi_stats_dma, GFP_KERNEL); | 
|  | if (!ql_iscsi_stats) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "Unable to allocate memory for iscsi stats\n"); | 
|  | goto exit_get_stats; | 
|  | } | 
|  |  | 
|  | ret =  qla4xxx_get_mgmt_data(ha, ddb_entry->fw_ddb_index, stats_size, | 
|  | iscsi_stats_dma); | 
|  | if (ret != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "Unable to retreive iscsi stats\n"); | 
|  | goto free_stats; | 
|  | } | 
|  |  | 
|  | /* octets */ | 
|  | stats->txdata_octets = le64_to_cpu(ql_iscsi_stats->tx_data_octets); | 
|  | stats->rxdata_octets = le64_to_cpu(ql_iscsi_stats->rx_data_octets); | 
|  | /* xmit pdus */ | 
|  | stats->noptx_pdus = le32_to_cpu(ql_iscsi_stats->tx_nopout_pdus); | 
|  | stats->scsicmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_cmd_pdus); | 
|  | stats->tmfcmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_tmf_cmd_pdus); | 
|  | stats->login_pdus = le32_to_cpu(ql_iscsi_stats->tx_login_cmd_pdus); | 
|  | stats->text_pdus = le32_to_cpu(ql_iscsi_stats->tx_text_cmd_pdus); | 
|  | stats->dataout_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_write_pdus); | 
|  | stats->logout_pdus = le32_to_cpu(ql_iscsi_stats->tx_logout_cmd_pdus); | 
|  | stats->snack_pdus = le32_to_cpu(ql_iscsi_stats->tx_snack_req_pdus); | 
|  | /* recv pdus */ | 
|  | stats->noprx_pdus = le32_to_cpu(ql_iscsi_stats->rx_nopin_pdus); | 
|  | stats->scsirsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_resp_pdus); | 
|  | stats->tmfrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_tmf_resp_pdus); | 
|  | stats->textrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_text_resp_pdus); | 
|  | stats->datain_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_read_pdus); | 
|  | stats->logoutrsp_pdus = | 
|  | le32_to_cpu(ql_iscsi_stats->rx_logout_resp_pdus); | 
|  | stats->r2t_pdus = le32_to_cpu(ql_iscsi_stats->rx_r2t_pdus); | 
|  | stats->async_pdus = le32_to_cpu(ql_iscsi_stats->rx_async_pdus); | 
|  | stats->rjt_pdus = le32_to_cpu(ql_iscsi_stats->rx_reject_pdus); | 
|  |  | 
|  | free_stats: | 
|  | dma_free_coherent(&ha->pdev->dev, stats_size, ql_iscsi_stats, | 
|  | iscsi_stats_dma); | 
|  | exit_get_stats: | 
|  | return; | 
|  | } | 
|  |  | 
|  | static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc) | 
|  | { | 
|  | struct iscsi_cls_session *session; | 
|  | struct iscsi_session *sess; | 
|  | unsigned long flags; | 
|  | enum blk_eh_timer_return ret = BLK_EH_NOT_HANDLED; | 
|  |  | 
|  | session = starget_to_session(scsi_target(sc->device)); | 
|  | sess = session->dd_data; | 
|  |  | 
|  | spin_lock_irqsave(&session->lock, flags); | 
|  | if (session->state == ISCSI_SESSION_FAILED) | 
|  | ret = BLK_EH_RESET_TIMER; | 
|  | spin_unlock_irqrestore(&session->lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_set_port_speed(struct Scsi_Host *shost) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | struct iscsi_cls_host *ihost = shost->shost_data; | 
|  | uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN; | 
|  |  | 
|  | qla4xxx_get_firmware_state(ha); | 
|  |  | 
|  | switch (ha->addl_fw_state & 0x0F00) { | 
|  | case FW_ADDSTATE_LINK_SPEED_10MBPS: | 
|  | speed = ISCSI_PORT_SPEED_10MBPS; | 
|  | break; | 
|  | case FW_ADDSTATE_LINK_SPEED_100MBPS: | 
|  | speed = ISCSI_PORT_SPEED_100MBPS; | 
|  | break; | 
|  | case FW_ADDSTATE_LINK_SPEED_1GBPS: | 
|  | speed = ISCSI_PORT_SPEED_1GBPS; | 
|  | break; | 
|  | case FW_ADDSTATE_LINK_SPEED_10GBPS: | 
|  | speed = ISCSI_PORT_SPEED_10GBPS; | 
|  | break; | 
|  | } | 
|  | ihost->port_speed = speed; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_set_port_state(struct Scsi_Host *shost) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | struct iscsi_cls_host *ihost = shost->shost_data; | 
|  | uint32_t state = ISCSI_PORT_STATE_DOWN; | 
|  |  | 
|  | if (test_bit(AF_LINK_UP, &ha->flags)) | 
|  | state = ISCSI_PORT_STATE_UP; | 
|  |  | 
|  | ihost->port_state = state; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_host_get_param(struct Scsi_Host *shost, | 
|  | enum iscsi_host_param param, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | int len; | 
|  |  | 
|  | switch (param) { | 
|  | case ISCSI_HOST_PARAM_HWADDRESS: | 
|  | len = sysfs_format_mac(buf, ha->my_mac, MAC_ADDR_LEN); | 
|  | break; | 
|  | case ISCSI_HOST_PARAM_IPADDRESS: | 
|  | len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address); | 
|  | break; | 
|  | case ISCSI_HOST_PARAM_INITIATOR_NAME: | 
|  | len = sprintf(buf, "%s\n", ha->name_string); | 
|  | break; | 
|  | case ISCSI_HOST_PARAM_PORT_STATE: | 
|  | qla4xxx_set_port_state(shost); | 
|  | len = sprintf(buf, "%s\n", iscsi_get_port_state_name(shost)); | 
|  | break; | 
|  | case ISCSI_HOST_PARAM_PORT_SPEED: | 
|  | qla4xxx_set_port_speed(shost); | 
|  | len = sprintf(buf, "%s\n", iscsi_get_port_speed_name(shost)); | 
|  | break; | 
|  | default: | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_create_ipv4_iface(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->iface_ipv4) | 
|  | return; | 
|  |  | 
|  | /* IPv4 */ | 
|  | ha->iface_ipv4 = iscsi_create_iface(ha->host, | 
|  | &qla4xxx_iscsi_transport, | 
|  | ISCSI_IFACE_TYPE_IPV4, 0, 0); | 
|  | if (!ha->iface_ipv4) | 
|  | ql4_printk(KERN_ERR, ha, "Could not create IPv4 iSCSI " | 
|  | "iface0.\n"); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_create_ipv6_iface(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (!ha->iface_ipv6_0) | 
|  | /* IPv6 iface-0 */ | 
|  | ha->iface_ipv6_0 = iscsi_create_iface(ha->host, | 
|  | &qla4xxx_iscsi_transport, | 
|  | ISCSI_IFACE_TYPE_IPV6, 0, | 
|  | 0); | 
|  | if (!ha->iface_ipv6_0) | 
|  | ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI " | 
|  | "iface0.\n"); | 
|  |  | 
|  | if (!ha->iface_ipv6_1) | 
|  | /* IPv6 iface-1 */ | 
|  | ha->iface_ipv6_1 = iscsi_create_iface(ha->host, | 
|  | &qla4xxx_iscsi_transport, | 
|  | ISCSI_IFACE_TYPE_IPV6, 1, | 
|  | 0); | 
|  | if (!ha->iface_ipv6_1) | 
|  | ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI " | 
|  | "iface1.\n"); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_create_ifaces(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->ip_config.ipv4_options & IPOPT_IPV4_PROTOCOL_ENABLE) | 
|  | qla4xxx_create_ipv4_iface(ha); | 
|  |  | 
|  | if (ha->ip_config.ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE) | 
|  | qla4xxx_create_ipv6_iface(ha); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_destroy_ipv4_iface(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->iface_ipv4) { | 
|  | iscsi_destroy_iface(ha->iface_ipv4); | 
|  | ha->iface_ipv4 = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_destroy_ipv6_iface(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->iface_ipv6_0) { | 
|  | iscsi_destroy_iface(ha->iface_ipv6_0); | 
|  | ha->iface_ipv6_0 = NULL; | 
|  | } | 
|  | if (ha->iface_ipv6_1) { | 
|  | iscsi_destroy_iface(ha->iface_ipv6_1); | 
|  | ha->iface_ipv6_1 = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_destroy_ifaces(struct scsi_qla_host *ha) | 
|  | { | 
|  | qla4xxx_destroy_ipv4_iface(ha); | 
|  | qla4xxx_destroy_ipv6_iface(ha); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_set_ipv6(struct scsi_qla_host *ha, | 
|  | struct iscsi_iface_param_info *iface_param, | 
|  | struct addr_ctrl_blk *init_fw_cb) | 
|  | { | 
|  | /* | 
|  | * iface_num 0 is valid for IPv6 Addr, linklocal, router, autocfg. | 
|  | * iface_num 1 is valid only for IPv6 Addr. | 
|  | */ | 
|  | switch (iface_param->param) { | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR: | 
|  | if (iface_param->iface_num & 0x1) | 
|  | /* IPv6 Addr 1 */ | 
|  | memcpy(init_fw_cb->ipv6_addr1, iface_param->value, | 
|  | sizeof(init_fw_cb->ipv6_addr1)); | 
|  | else | 
|  | /* IPv6 Addr 0 */ | 
|  | memcpy(init_fw_cb->ipv6_addr0, iface_param->value, | 
|  | sizeof(init_fw_cb->ipv6_addr0)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL: | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  | memcpy(init_fw_cb->ipv6_if_id, &iface_param->value[8], | 
|  | sizeof(init_fw_cb->ipv6_if_id)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ROUTER: | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  | memcpy(init_fw_cb->ipv6_dflt_rtr_addr, iface_param->value, | 
|  | sizeof(init_fw_cb->ipv6_dflt_rtr_addr)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG: | 
|  | /* Autocfg applies to even interface */ | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  |  | 
|  | if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_DISABLE) | 
|  | init_fw_cb->ipv6_addtl_opts &= | 
|  | cpu_to_le16( | 
|  | ~IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE); | 
|  | else if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_ND_ENABLE) | 
|  | init_fw_cb->ipv6_addtl_opts |= | 
|  | cpu_to_le16( | 
|  | IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE); | 
|  | else | 
|  | ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for " | 
|  | "IPv6 addr\n"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG: | 
|  | /* Autocfg applies to even interface */ | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  |  | 
|  | if (iface_param->value[0] == | 
|  | ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE) | 
|  | init_fw_cb->ipv6_addtl_opts |= cpu_to_le16( | 
|  | IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR); | 
|  | else if (iface_param->value[0] == | 
|  | ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE) | 
|  | init_fw_cb->ipv6_addtl_opts &= cpu_to_le16( | 
|  | ~IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR); | 
|  | else | 
|  | ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for " | 
|  | "IPv6 linklocal addr\n"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG: | 
|  | /* Autocfg applies to even interface */ | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  |  | 
|  | if (iface_param->value[0] == ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE) | 
|  | memset(init_fw_cb->ipv6_dflt_rtr_addr, 0, | 
|  | sizeof(init_fw_cb->ipv6_dflt_rtr_addr)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IFACE_ENABLE: | 
|  | if (iface_param->value[0] == ISCSI_IFACE_ENABLE) { | 
|  | init_fw_cb->ipv6_opts |= | 
|  | cpu_to_le16(IPV6_OPT_IPV6_PROTOCOL_ENABLE); | 
|  | qla4xxx_create_ipv6_iface(ha); | 
|  | } else { | 
|  | init_fw_cb->ipv6_opts &= | 
|  | cpu_to_le16(~IPV6_OPT_IPV6_PROTOCOL_ENABLE & | 
|  | 0xFFFF); | 
|  | qla4xxx_destroy_ipv6_iface(ha); | 
|  | } | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_TAG: | 
|  | if (iface_param->len != sizeof(init_fw_cb->ipv6_vlan_tag)) | 
|  | break; | 
|  | init_fw_cb->ipv6_vlan_tag = | 
|  | cpu_to_be16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_ENABLED: | 
|  | if (iface_param->value[0] == ISCSI_VLAN_ENABLE) | 
|  | init_fw_cb->ipv6_opts |= | 
|  | cpu_to_le16(IPV6_OPT_VLAN_TAGGING_ENABLE); | 
|  | else | 
|  | init_fw_cb->ipv6_opts &= | 
|  | cpu_to_le16(~IPV6_OPT_VLAN_TAGGING_ENABLE); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_MTU: | 
|  | init_fw_cb->eth_mtu_size = | 
|  | cpu_to_le16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_PORT: | 
|  | /* Autocfg applies to even interface */ | 
|  | if (iface_param->iface_num & 0x1) | 
|  | break; | 
|  |  | 
|  | init_fw_cb->ipv6_port = | 
|  | cpu_to_le16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | default: | 
|  | ql4_printk(KERN_ERR, ha, "Unknown IPv6 param = %d\n", | 
|  | iface_param->param); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_set_ipv4(struct scsi_qla_host *ha, | 
|  | struct iscsi_iface_param_info *iface_param, | 
|  | struct addr_ctrl_blk *init_fw_cb) | 
|  | { | 
|  | switch (iface_param->param) { | 
|  | case ISCSI_NET_PARAM_IPV4_ADDR: | 
|  | memcpy(init_fw_cb->ipv4_addr, iface_param->value, | 
|  | sizeof(init_fw_cb->ipv4_addr)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_SUBNET: | 
|  | memcpy(init_fw_cb->ipv4_subnet,	iface_param->value, | 
|  | sizeof(init_fw_cb->ipv4_subnet)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_GW: | 
|  | memcpy(init_fw_cb->ipv4_gw_addr, iface_param->value, | 
|  | sizeof(init_fw_cb->ipv4_gw_addr)); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IPV4_BOOTPROTO: | 
|  | if (iface_param->value[0] == ISCSI_BOOTPROTO_DHCP) | 
|  | init_fw_cb->ipv4_tcp_opts |= | 
|  | cpu_to_le16(TCPOPT_DHCP_ENABLE); | 
|  | else if (iface_param->value[0] == ISCSI_BOOTPROTO_STATIC) | 
|  | init_fw_cb->ipv4_tcp_opts &= | 
|  | cpu_to_le16(~TCPOPT_DHCP_ENABLE); | 
|  | else | 
|  | ql4_printk(KERN_ERR, ha, "Invalid IPv4 bootproto\n"); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_IFACE_ENABLE: | 
|  | if (iface_param->value[0] == ISCSI_IFACE_ENABLE) { | 
|  | init_fw_cb->ipv4_ip_opts |= | 
|  | cpu_to_le16(IPOPT_IPV4_PROTOCOL_ENABLE); | 
|  | qla4xxx_create_ipv4_iface(ha); | 
|  | } else { | 
|  | init_fw_cb->ipv4_ip_opts &= | 
|  | cpu_to_le16(~IPOPT_IPV4_PROTOCOL_ENABLE & | 
|  | 0xFFFF); | 
|  | qla4xxx_destroy_ipv4_iface(ha); | 
|  | } | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_TAG: | 
|  | if (iface_param->len != sizeof(init_fw_cb->ipv4_vlan_tag)) | 
|  | break; | 
|  | init_fw_cb->ipv4_vlan_tag = | 
|  | cpu_to_be16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_VLAN_ENABLED: | 
|  | if (iface_param->value[0] == ISCSI_VLAN_ENABLE) | 
|  | init_fw_cb->ipv4_ip_opts |= | 
|  | cpu_to_le16(IPOPT_VLAN_TAGGING_ENABLE); | 
|  | else | 
|  | init_fw_cb->ipv4_ip_opts &= | 
|  | cpu_to_le16(~IPOPT_VLAN_TAGGING_ENABLE); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_MTU: | 
|  | init_fw_cb->eth_mtu_size = | 
|  | cpu_to_le16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | case ISCSI_NET_PARAM_PORT: | 
|  | init_fw_cb->ipv4_port = | 
|  | cpu_to_le16(*(uint16_t *)iface_param->value); | 
|  | break; | 
|  | default: | 
|  | ql4_printk(KERN_ERR, ha, "Unknown IPv4 param = %d\n", | 
|  | iface_param->param); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | qla4xxx_initcb_to_acb(struct addr_ctrl_blk *init_fw_cb) | 
|  | { | 
|  | struct addr_ctrl_blk_def *acb; | 
|  | acb = (struct addr_ctrl_blk_def *)init_fw_cb; | 
|  | memset(acb->reserved1, 0, sizeof(acb->reserved1)); | 
|  | memset(acb->reserved2, 0, sizeof(acb->reserved2)); | 
|  | memset(acb->reserved3, 0, sizeof(acb->reserved3)); | 
|  | memset(acb->reserved4, 0, sizeof(acb->reserved4)); | 
|  | memset(acb->reserved5, 0, sizeof(acb->reserved5)); | 
|  | memset(acb->reserved6, 0, sizeof(acb->reserved6)); | 
|  | memset(acb->reserved7, 0, sizeof(acb->reserved7)); | 
|  | memset(acb->reserved8, 0, sizeof(acb->reserved8)); | 
|  | memset(acb->reserved9, 0, sizeof(acb->reserved9)); | 
|  | memset(acb->reserved10, 0, sizeof(acb->reserved10)); | 
|  | memset(acb->reserved11, 0, sizeof(acb->reserved11)); | 
|  | memset(acb->reserved12, 0, sizeof(acb->reserved12)); | 
|  | memset(acb->reserved13, 0, sizeof(acb->reserved13)); | 
|  | memset(acb->reserved14, 0, sizeof(acb->reserved14)); | 
|  | memset(acb->reserved15, 0, sizeof(acb->reserved15)); | 
|  | } | 
|  |  | 
|  | static int | 
|  | qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, uint32_t len) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | int rval = 0; | 
|  | struct iscsi_iface_param_info *iface_param = NULL; | 
|  | struct addr_ctrl_blk *init_fw_cb = NULL; | 
|  | dma_addr_t init_fw_cb_dma; | 
|  | uint32_t mbox_cmd[MBOX_REG_COUNT]; | 
|  | uint32_t mbox_sts[MBOX_REG_COUNT]; | 
|  | uint32_t rem = len; | 
|  | struct nlattr *attr; | 
|  |  | 
|  | init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, | 
|  | sizeof(struct addr_ctrl_blk), | 
|  | &init_fw_cb_dma, GFP_KERNEL); | 
|  | if (!init_fw_cb) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n", | 
|  | __func__); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); | 
|  | memset(&mbox_cmd, 0, sizeof(mbox_cmd)); | 
|  | memset(&mbox_sts, 0, sizeof(mbox_sts)); | 
|  |  | 
|  | if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: get ifcb failed\n", __func__); | 
|  | rval = -EIO; | 
|  | goto exit_init_fw_cb; | 
|  | } | 
|  |  | 
|  | nla_for_each_attr(attr, data, len, rem) { | 
|  | iface_param = nla_data(attr); | 
|  |  | 
|  | if (iface_param->param_type != ISCSI_NET_PARAM) | 
|  | continue; | 
|  |  | 
|  | switch (iface_param->iface_type) { | 
|  | case ISCSI_IFACE_TYPE_IPV4: | 
|  | switch (iface_param->iface_num) { | 
|  | case 0: | 
|  | qla4xxx_set_ipv4(ha, iface_param, init_fw_cb); | 
|  | break; | 
|  | default: | 
|  | /* Cannot have more than one IPv4 interface */ | 
|  | ql4_printk(KERN_ERR, ha, "Invalid IPv4 iface " | 
|  | "number = %d\n", | 
|  | iface_param->iface_num); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case ISCSI_IFACE_TYPE_IPV6: | 
|  | switch (iface_param->iface_num) { | 
|  | case 0: | 
|  | case 1: | 
|  | qla4xxx_set_ipv6(ha, iface_param, init_fw_cb); | 
|  | break; | 
|  | default: | 
|  | /* Cannot have more than two IPv6 interface */ | 
|  | ql4_printk(KERN_ERR, ha, "Invalid IPv6 iface " | 
|  | "number = %d\n", | 
|  | iface_param->iface_num); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | ql4_printk(KERN_ERR, ha, "Invalid iface type\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | init_fw_cb->cookie = cpu_to_le32(0x11BEAD5A); | 
|  |  | 
|  | rval = qla4xxx_set_flash(ha, init_fw_cb_dma, FLASH_SEGMENT_IFCB, | 
|  | sizeof(struct addr_ctrl_blk), | 
|  | FLASH_OPT_RMW_COMMIT); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: set flash mbx failed\n", | 
|  | __func__); | 
|  | rval = -EIO; | 
|  | goto exit_init_fw_cb; | 
|  | } | 
|  |  | 
|  | rval = qla4xxx_disable_acb(ha); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: disable acb mbx failed\n", | 
|  | __func__); | 
|  | rval = -EIO; | 
|  | goto exit_init_fw_cb; | 
|  | } | 
|  |  | 
|  | wait_for_completion_timeout(&ha->disable_acb_comp, | 
|  | DISABLE_ACB_TOV * HZ); | 
|  |  | 
|  | qla4xxx_initcb_to_acb(init_fw_cb); | 
|  |  | 
|  | rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: set acb mbx failed\n", | 
|  | __func__); | 
|  | rval = -EIO; | 
|  | goto exit_init_fw_cb; | 
|  | } | 
|  |  | 
|  | memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); | 
|  | qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb, | 
|  | init_fw_cb_dma); | 
|  |  | 
|  | exit_init_fw_cb: | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), | 
|  | init_fw_cb, init_fw_cb_dma); | 
|  |  | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_session_get_param(struct iscsi_cls_session *cls_sess, | 
|  | enum iscsi_param param, char *buf) | 
|  | { | 
|  | struct iscsi_session *sess = cls_sess->dd_data; | 
|  | struct ddb_entry *ddb_entry = sess->dd_data; | 
|  | struct scsi_qla_host *ha = ddb_entry->ha; | 
|  | int rval, len; | 
|  | uint16_t idx; | 
|  |  | 
|  | switch (param) { | 
|  | case ISCSI_PARAM_CHAP_IN_IDX: | 
|  | rval = qla4xxx_get_chap_index(ha, sess->username_in, | 
|  | sess->password_in, BIDI_CHAP, | 
|  | &idx); | 
|  | if (rval) | 
|  | return -EINVAL; | 
|  |  | 
|  | len = sprintf(buf, "%hu\n", idx); | 
|  | break; | 
|  | case ISCSI_PARAM_CHAP_OUT_IDX: | 
|  | rval = qla4xxx_get_chap_index(ha, sess->username, | 
|  | sess->password, LOCAL_CHAP, | 
|  | &idx); | 
|  | if (rval) | 
|  | return -EINVAL; | 
|  |  | 
|  | len = sprintf(buf, "%hu\n", idx); | 
|  | break; | 
|  | default: | 
|  | return iscsi_session_get_param(cls_sess, param, buf); | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn, | 
|  | enum iscsi_param param, char *buf) | 
|  | { | 
|  | struct iscsi_conn *conn; | 
|  | struct qla_conn *qla_conn; | 
|  | struct sockaddr *dst_addr; | 
|  | int len = 0; | 
|  |  | 
|  | conn = cls_conn->dd_data; | 
|  | qla_conn = conn->dd_data; | 
|  | dst_addr = &qla_conn->qla_ep->dst_addr; | 
|  |  | 
|  | switch (param) { | 
|  | case ISCSI_PARAM_CONN_PORT: | 
|  | case ISCSI_PARAM_CONN_ADDRESS: | 
|  | return iscsi_conn_get_addr_param((struct sockaddr_storage *) | 
|  | dst_addr, param, buf); | 
|  | default: | 
|  | return iscsi_conn_get_param(cls_conn, param, buf); | 
|  | } | 
|  |  | 
|  | return len; | 
|  |  | 
|  | } | 
|  |  | 
|  | int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index) | 
|  | { | 
|  | uint32_t mbx_sts = 0; | 
|  | uint16_t tmp_ddb_index; | 
|  | int ret; | 
|  |  | 
|  | get_ddb_index: | 
|  | tmp_ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES); | 
|  |  | 
|  | if (tmp_ddb_index >= MAX_DDB_ENTRIES) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Free DDB index not available\n")); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_get_ddb_index; | 
|  | } | 
|  |  | 
|  | if (test_and_set_bit(tmp_ddb_index, ha->ddb_idx_map)) | 
|  | goto get_ddb_index; | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Found a free DDB index at %d\n", tmp_ddb_index)); | 
|  | ret = qla4xxx_req_ddb_entry(ha, tmp_ddb_index, &mbx_sts); | 
|  | if (ret == QLA_ERROR) { | 
|  | if (mbx_sts == MBOX_STS_COMMAND_ERROR) { | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "DDB index = %d not available trying next\n", | 
|  | tmp_ddb_index); | 
|  | goto get_ddb_index; | 
|  | } | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Free FW DDB not available\n")); | 
|  | } | 
|  |  | 
|  | *ddb_index = tmp_ddb_index; | 
|  |  | 
|  | exit_get_ddb_index: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_match_ipaddress(struct scsi_qla_host *ha, | 
|  | struct ddb_entry *ddb_entry, | 
|  | char *existing_ipaddr, | 
|  | char *user_ipaddr) | 
|  | { | 
|  | uint8_t dst_ipaddr[IPv6_ADDR_LEN]; | 
|  | char formatted_ipaddr[DDB_IPADDR_LEN]; | 
|  | int status = QLA_SUCCESS, ret = 0; | 
|  |  | 
|  | if (ddb_entry->fw_ddb_entry.options & DDB_OPT_IPV6_DEVICE) { | 
|  | ret = in6_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, | 
|  | '\0', NULL); | 
|  | if (ret == 0) { | 
|  | status = QLA_ERROR; | 
|  | goto out_match; | 
|  | } | 
|  | ret = sprintf(formatted_ipaddr, "%pI6", dst_ipaddr); | 
|  | } else { | 
|  | ret = in4_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, | 
|  | '\0', NULL); | 
|  | if (ret == 0) { | 
|  | status = QLA_ERROR; | 
|  | goto out_match; | 
|  | } | 
|  | ret = sprintf(formatted_ipaddr, "%pI4", dst_ipaddr); | 
|  | } | 
|  |  | 
|  | if (strcmp(existing_ipaddr, formatted_ipaddr)) | 
|  | status = QLA_ERROR; | 
|  |  | 
|  | out_match: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_match_fwdb_session(struct scsi_qla_host *ha, | 
|  | struct iscsi_cls_conn *cls_conn) | 
|  | { | 
|  | int idx = 0, max_ddbs, rval; | 
|  | struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn); | 
|  | struct iscsi_session *sess, *existing_sess; | 
|  | struct iscsi_conn *conn, *existing_conn; | 
|  | struct ddb_entry *ddb_entry; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | conn = cls_conn->dd_data; | 
|  |  | 
|  | if (sess->targetname == NULL || | 
|  | conn->persistent_address == NULL || | 
|  | conn->persistent_port == 0) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | max_ddbs =  is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : | 
|  | MAX_DEV_DB_ENTRIES; | 
|  |  | 
|  | for (idx = 0; idx < max_ddbs; idx++) { | 
|  | ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); | 
|  | if (ddb_entry == NULL) | 
|  | continue; | 
|  |  | 
|  | if (ddb_entry->ddb_type != FLASH_DDB) | 
|  | continue; | 
|  |  | 
|  | existing_sess = ddb_entry->sess->dd_data; | 
|  | existing_conn = ddb_entry->conn->dd_data; | 
|  |  | 
|  | if (existing_sess->targetname == NULL || | 
|  | existing_conn->persistent_address == NULL || | 
|  | existing_conn->persistent_port == 0) | 
|  | continue; | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "IQN = %s User IQN = %s\n", | 
|  | existing_sess->targetname, | 
|  | sess->targetname)); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "IP = %s User IP = %s\n", | 
|  | existing_conn->persistent_address, | 
|  | conn->persistent_address)); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Port = %d User Port = %d\n", | 
|  | existing_conn->persistent_port, | 
|  | conn->persistent_port)); | 
|  |  | 
|  | if (strcmp(existing_sess->targetname, sess->targetname)) | 
|  | continue; | 
|  | rval = qla4xxx_match_ipaddress(ha, ddb_entry, | 
|  | existing_conn->persistent_address, | 
|  | conn->persistent_address); | 
|  | if (rval == QLA_ERROR) | 
|  | continue; | 
|  | if (existing_conn->persistent_port != conn->persistent_port) | 
|  | continue; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (idx == max_ddbs) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Match found in fwdb sessions\n")); | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | static struct iscsi_cls_session * | 
|  | qla4xxx_session_create(struct iscsi_endpoint *ep, | 
|  | uint16_t cmds_max, uint16_t qdepth, | 
|  | uint32_t initial_cmdsn) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct scsi_qla_host *ha; | 
|  | struct qla_endpoint *qla_ep; | 
|  | struct ddb_entry *ddb_entry; | 
|  | uint16_t ddb_index; | 
|  | struct iscsi_session *sess; | 
|  | struct sockaddr *dst_addr; | 
|  | int ret; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | if (!ep) { | 
|  | printk(KERN_ERR "qla4xxx: missing ep.\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | qla_ep = ep->dd_data; | 
|  | dst_addr = (struct sockaddr *)&qla_ep->dst_addr; | 
|  | ha = to_qla_host(qla_ep->host); | 
|  |  | 
|  | ret = qla4xxx_get_ddb_index(ha, &ddb_index); | 
|  | if (ret == QLA_ERROR) | 
|  | return NULL; | 
|  |  | 
|  | cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host, | 
|  | cmds_max, sizeof(struct ddb_entry), | 
|  | sizeof(struct ql4_task_data), | 
|  | initial_cmdsn, ddb_index); | 
|  | if (!cls_sess) | 
|  | return NULL; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ddb_entry->fw_ddb_index = ddb_index; | 
|  | ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; | 
|  | ddb_entry->ha = ha; | 
|  | ddb_entry->sess = cls_sess; | 
|  | ddb_entry->unblock_sess = qla4xxx_unblock_ddb; | 
|  | ddb_entry->ddb_change = qla4xxx_ddb_change; | 
|  | cls_sess->recovery_tmo = ql4xsess_recovery_tmo; | 
|  | ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; | 
|  | ha->tot_ddbs++; | 
|  |  | 
|  | return cls_sess; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_session_destroy(struct iscsi_cls_session *cls_sess) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  | unsigned long flags, wtime; | 
|  | struct dev_db_entry *fw_ddb_entry = NULL; | 
|  | dma_addr_t fw_ddb_entry_dma; | 
|  | uint32_t ddb_state; | 
|  | int ret; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | &fw_ddb_entry_dma, GFP_KERNEL); | 
|  | if (!fw_ddb_entry) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer\n", __func__); | 
|  | goto destroy_session; | 
|  | } | 
|  |  | 
|  | wtime = jiffies + (HZ * LOGOUT_TOV); | 
|  | do { | 
|  | ret = qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, | 
|  | fw_ddb_entry, fw_ddb_entry_dma, | 
|  | NULL, NULL, &ddb_state, NULL, | 
|  | NULL, NULL); | 
|  | if (ret == QLA_ERROR) | 
|  | goto destroy_session; | 
|  |  | 
|  | if ((ddb_state == DDB_DS_NO_CONNECTION_ACTIVE) || | 
|  | (ddb_state == DDB_DS_SESSION_FAILED)) | 
|  | goto destroy_session; | 
|  |  | 
|  | schedule_timeout_uninterruptible(HZ); | 
|  | } while ((time_after(wtime, jiffies))); | 
|  |  | 
|  | destroy_session: | 
|  | qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index); | 
|  |  | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | qla4xxx_free_ddb(ha, ddb_entry); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | iscsi_session_teardown(cls_sess); | 
|  |  | 
|  | if (fw_ddb_entry) | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | fw_ddb_entry, fw_ddb_entry_dma); | 
|  | } | 
|  |  | 
|  | static struct iscsi_cls_conn * | 
|  | qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx) | 
|  | { | 
|  | struct iscsi_cls_conn *cls_conn; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), | 
|  | conn_idx); | 
|  | if (!cls_conn) | 
|  | return NULL; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ddb_entry->conn = cls_conn; | 
|  |  | 
|  | return cls_conn; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session, | 
|  | struct iscsi_cls_conn *cls_conn, | 
|  | uint64_t transport_fd, int is_leading) | 
|  | { | 
|  | struct iscsi_conn *conn; | 
|  | struct qla_conn *qla_conn; | 
|  | struct iscsi_endpoint *ep; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  |  | 
|  | if (iscsi_conn_bind(cls_session, cls_conn, is_leading)) | 
|  | return -EINVAL; | 
|  | ep = iscsi_lookup_endpoint(transport_fd); | 
|  | conn = cls_conn->dd_data; | 
|  | qla_conn = conn->dd_data; | 
|  | qla_conn->qla_ep = ep->dd_data; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn); | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  | struct dev_db_entry *fw_ddb_entry = NULL; | 
|  | dma_addr_t fw_ddb_entry_dma; | 
|  | uint32_t mbx_sts = 0; | 
|  | int ret = 0; | 
|  | int status = QLA_SUCCESS; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | /* Check if we have  matching FW DDB, if yes then do not | 
|  | * login to this target. This could cause target to logout previous | 
|  | * connection | 
|  | */ | 
|  | ret = qla4xxx_match_fwdb_session(ha, cls_conn); | 
|  | if (ret == QLA_SUCCESS) { | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "Session already exist in FW.\n"); | 
|  | ret = -EEXIST; | 
|  | goto exit_conn_start; | 
|  | } | 
|  |  | 
|  | fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | &fw_ddb_entry_dma, GFP_KERNEL); | 
|  | if (!fw_ddb_entry) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer\n", __func__); | 
|  | ret = -ENOMEM; | 
|  | goto exit_conn_start; | 
|  | } | 
|  |  | 
|  | ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts); | 
|  | if (ret) { | 
|  | /* If iscsid is stopped and started then no need to do | 
|  | * set param again since ddb state will be already | 
|  | * active and FW does not allow set ddb to an | 
|  | * active session. | 
|  | */ | 
|  | if (mbx_sts) | 
|  | if (ddb_entry->fw_ddb_device_state == | 
|  | DDB_DS_SESSION_ACTIVE) { | 
|  | ddb_entry->unblock_sess(ddb_entry->sess); | 
|  | goto exit_set_param; | 
|  | } | 
|  |  | 
|  | ql4_printk(KERN_ERR, ha, "%s: Failed set param for index[%d]\n", | 
|  | __func__, ddb_entry->fw_ddb_index); | 
|  | goto exit_conn_start; | 
|  | } | 
|  |  | 
|  | status = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index); | 
|  | if (status == QLA_ERROR) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__, | 
|  | sess->targetname); | 
|  | ret = -EINVAL; | 
|  | goto exit_conn_start; | 
|  | } | 
|  |  | 
|  | if (ddb_entry->fw_ddb_device_state == DDB_DS_NO_CONNECTION_ACTIVE) | 
|  | ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "%s: DDB state [%d]\n", __func__, | 
|  | ddb_entry->fw_ddb_device_state)); | 
|  |  | 
|  | exit_set_param: | 
|  | ret = 0; | 
|  |  | 
|  | exit_conn_start: | 
|  | if (fw_ddb_entry) | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | fw_ddb_entry, fw_ddb_entry_dma); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_conn_destroy(struct iscsi_cls_conn *cls_conn) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn); | 
|  | struct iscsi_session *sess; | 
|  | struct scsi_qla_host *ha; | 
|  | struct ddb_entry *ddb_entry; | 
|  | int options; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | options = LOGOUT_OPTION_CLOSE_SESSION; | 
|  | if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) == QLA_ERROR) | 
|  | ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", __func__); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_task_work(struct work_struct *wdata) | 
|  | { | 
|  | struct ql4_task_data *task_data; | 
|  | struct scsi_qla_host *ha; | 
|  | struct passthru_status *sts; | 
|  | struct iscsi_task *task; | 
|  | struct iscsi_hdr *hdr; | 
|  | uint8_t *data; | 
|  | uint32_t data_len; | 
|  | struct iscsi_conn *conn; | 
|  | int hdr_len; | 
|  | itt_t itt; | 
|  |  | 
|  | task_data = container_of(wdata, struct ql4_task_data, task_work); | 
|  | ha = task_data->ha; | 
|  | task = task_data->task; | 
|  | sts = &task_data->sts; | 
|  | hdr_len = sizeof(struct iscsi_hdr); | 
|  |  | 
|  | DEBUG3(printk(KERN_INFO "Status returned\n")); | 
|  | DEBUG3(qla4xxx_dump_buffer(sts, 64)); | 
|  | DEBUG3(printk(KERN_INFO "Response buffer")); | 
|  | DEBUG3(qla4xxx_dump_buffer(task_data->resp_buffer, 64)); | 
|  |  | 
|  | conn = task->conn; | 
|  |  | 
|  | switch (sts->completionStatus) { | 
|  | case PASSTHRU_STATUS_COMPLETE: | 
|  | hdr = (struct iscsi_hdr *)task_data->resp_buffer; | 
|  | /* Assign back the itt in hdr, until we use the PREASSIGN_TAG */ | 
|  | itt = sts->handle; | 
|  | hdr->itt = itt; | 
|  | data = task_data->resp_buffer + hdr_len; | 
|  | data_len = task_data->resp_len - hdr_len; | 
|  | iscsi_complete_pdu(conn, hdr, data, data_len); | 
|  | break; | 
|  | default: | 
|  | ql4_printk(KERN_ERR, ha, "Passthru failed status = 0x%x\n", | 
|  | sts->completionStatus); | 
|  | break; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_alloc_pdu(struct iscsi_task *task, uint8_t opcode) | 
|  | { | 
|  | struct ql4_task_data *task_data; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  | int hdr_len; | 
|  |  | 
|  | sess = task->conn->session; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  | task_data = task->dd_data; | 
|  | memset(task_data, 0, sizeof(struct ql4_task_data)); | 
|  |  | 
|  | if (task->sc) { | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "%s: SCSI Commands not implemented\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | hdr_len = sizeof(struct iscsi_hdr); | 
|  | task_data->ha = ha; | 
|  | task_data->task = task; | 
|  |  | 
|  | if (task->data_count) { | 
|  | task_data->data_dma = dma_map_single(&ha->pdev->dev, task->data, | 
|  | task->data_count, | 
|  | PCI_DMA_TODEVICE); | 
|  | } | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n", | 
|  | __func__, task->conn->max_recv_dlength, hdr_len)); | 
|  |  | 
|  | task_data->resp_len = task->conn->max_recv_dlength + hdr_len; | 
|  | task_data->resp_buffer = dma_alloc_coherent(&ha->pdev->dev, | 
|  | task_data->resp_len, | 
|  | &task_data->resp_dma, | 
|  | GFP_ATOMIC); | 
|  | if (!task_data->resp_buffer) | 
|  | goto exit_alloc_pdu; | 
|  |  | 
|  | task_data->req_len = task->data_count + hdr_len; | 
|  | task_data->req_buffer = dma_alloc_coherent(&ha->pdev->dev, | 
|  | task_data->req_len, | 
|  | &task_data->req_dma, | 
|  | GFP_ATOMIC); | 
|  | if (!task_data->req_buffer) | 
|  | goto exit_alloc_pdu; | 
|  |  | 
|  | task->hdr = task_data->req_buffer; | 
|  |  | 
|  | INIT_WORK(&task_data->task_work, qla4xxx_task_work); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_alloc_pdu: | 
|  | if (task_data->resp_buffer) | 
|  | dma_free_coherent(&ha->pdev->dev, task_data->resp_len, | 
|  | task_data->resp_buffer, task_data->resp_dma); | 
|  |  | 
|  | if (task_data->req_buffer) | 
|  | dma_free_coherent(&ha->pdev->dev, task_data->req_len, | 
|  | task_data->req_buffer, task_data->req_dma); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_task_cleanup(struct iscsi_task *task) | 
|  | { | 
|  | struct ql4_task_data *task_data; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  | int hdr_len; | 
|  |  | 
|  | hdr_len = sizeof(struct iscsi_hdr); | 
|  | sess = task->conn->session; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  | task_data = task->dd_data; | 
|  |  | 
|  | if (task->data_count) { | 
|  | dma_unmap_single(&ha->pdev->dev, task_data->data_dma, | 
|  | task->data_count, PCI_DMA_TODEVICE); | 
|  | } | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n", | 
|  | __func__, task->conn->max_recv_dlength, hdr_len)); | 
|  |  | 
|  | dma_free_coherent(&ha->pdev->dev, task_data->resp_len, | 
|  | task_data->resp_buffer, task_data->resp_dma); | 
|  | dma_free_coherent(&ha->pdev->dev, task_data->req_len, | 
|  | task_data->req_buffer, task_data->req_dma); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_task_xmit(struct iscsi_task *task) | 
|  | { | 
|  | struct scsi_cmnd *sc = task->sc; | 
|  | struct iscsi_session *sess = task->conn->session; | 
|  | struct ddb_entry *ddb_entry = sess->dd_data; | 
|  | struct scsi_qla_host *ha = ddb_entry->ha; | 
|  |  | 
|  | if (!sc) | 
|  | return qla4xxx_send_passthru0(task); | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, "%s: scsi cmd xmit not implemented\n", | 
|  | __func__); | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha, | 
|  | struct dev_db_entry *fw_ddb_entry, | 
|  | struct iscsi_cls_session *cls_sess, | 
|  | struct iscsi_cls_conn *cls_conn) | 
|  | { | 
|  | int buflen = 0; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct iscsi_conn *conn; | 
|  | char ip_addr[DDB_IPADDR_LEN]; | 
|  | uint16_t options = 0; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | conn = cls_conn->dd_data; | 
|  |  | 
|  | ddb_entry->chap_tbl_idx = le16_to_cpu(fw_ddb_entry->chap_tbl_idx); | 
|  |  | 
|  | conn->max_recv_dlength = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); | 
|  |  | 
|  | conn->max_xmit_dlength = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len); | 
|  |  | 
|  | sess->initial_r2t_en = | 
|  | (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options)); | 
|  |  | 
|  | sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t); | 
|  |  | 
|  | sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options)); | 
|  |  | 
|  | sess->first_burst = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len); | 
|  |  | 
|  | sess->max_burst = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len); | 
|  |  | 
|  | sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); | 
|  |  | 
|  | sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain); | 
|  |  | 
|  | conn->persistent_port = le16_to_cpu(fw_ddb_entry->port); | 
|  |  | 
|  | sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); | 
|  |  | 
|  | options = le16_to_cpu(fw_ddb_entry->options); | 
|  | if (options & DDB_OPT_IPV6_DEVICE) | 
|  | sprintf(ip_addr, "%pI6", fw_ddb_entry->ip_addr); | 
|  | else | 
|  | sprintf(ip_addr, "%pI4", fw_ddb_entry->ip_addr); | 
|  |  | 
|  | iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_NAME, | 
|  | (char *)fw_ddb_entry->iscsi_name, buflen); | 
|  | iscsi_set_param(cls_conn, ISCSI_PARAM_INITIATOR_NAME, | 
|  | (char *)ha->name_string, buflen); | 
|  | iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS, | 
|  | (char *)ip_addr, buflen); | 
|  | iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS, | 
|  | (char *)fw_ddb_entry->iscsi_alias, buflen); | 
|  | } | 
|  |  | 
|  | void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, | 
|  | struct ddb_entry *ddb_entry) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct iscsi_cls_conn *cls_conn; | 
|  | uint32_t ddb_state; | 
|  | dma_addr_t fw_ddb_entry_dma; | 
|  | struct dev_db_entry *fw_ddb_entry; | 
|  |  | 
|  | fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | &fw_ddb_entry_dma, GFP_KERNEL); | 
|  | if (!fw_ddb_entry) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer\n", __func__); | 
|  | goto exit_session_conn_fwddb_param; | 
|  | } | 
|  |  | 
|  | if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, | 
|  | fw_ddb_entry_dma, NULL, NULL, &ddb_state, | 
|  | NULL, NULL, NULL) == QLA_ERROR) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " | 
|  | "get_ddb_entry for fw_ddb_index %d\n", | 
|  | ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index)); | 
|  | goto exit_session_conn_fwddb_param; | 
|  | } | 
|  |  | 
|  | cls_sess = ddb_entry->sess; | 
|  |  | 
|  | cls_conn = ddb_entry->conn; | 
|  |  | 
|  | /* Update params */ | 
|  | qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); | 
|  |  | 
|  | exit_session_conn_fwddb_param: | 
|  | if (fw_ddb_entry) | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | fw_ddb_entry, fw_ddb_entry_dma); | 
|  | } | 
|  |  | 
|  | void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, | 
|  | struct ddb_entry *ddb_entry) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct iscsi_cls_conn *cls_conn; | 
|  | struct iscsi_session *sess; | 
|  | struct iscsi_conn *conn; | 
|  | uint32_t ddb_state; | 
|  | dma_addr_t fw_ddb_entry_dma; | 
|  | struct dev_db_entry *fw_ddb_entry; | 
|  |  | 
|  | fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | &fw_ddb_entry_dma, GFP_KERNEL); | 
|  | if (!fw_ddb_entry) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer\n", __func__); | 
|  | goto exit_session_conn_param; | 
|  | } | 
|  |  | 
|  | if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, | 
|  | fw_ddb_entry_dma, NULL, NULL, &ddb_state, | 
|  | NULL, NULL, NULL) == QLA_ERROR) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " | 
|  | "get_ddb_entry for fw_ddb_index %d\n", | 
|  | ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index)); | 
|  | goto exit_session_conn_param; | 
|  | } | 
|  |  | 
|  | cls_sess = ddb_entry->sess; | 
|  | sess = cls_sess->dd_data; | 
|  |  | 
|  | cls_conn = ddb_entry->conn; | 
|  | conn = cls_conn->dd_data; | 
|  |  | 
|  | /* Update timers after login */ | 
|  | ddb_entry->default_relogin_timeout = | 
|  | (le16_to_cpu(fw_ddb_entry->def_timeout) > LOGIN_TOV) && | 
|  | (le16_to_cpu(fw_ddb_entry->def_timeout) < LOGIN_TOV * 10) ? | 
|  | le16_to_cpu(fw_ddb_entry->def_timeout) : LOGIN_TOV; | 
|  | ddb_entry->default_time2wait = | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); | 
|  |  | 
|  | /* Update params */ | 
|  | ddb_entry->chap_tbl_idx = le16_to_cpu(fw_ddb_entry->chap_tbl_idx); | 
|  | conn->max_recv_dlength = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); | 
|  |  | 
|  | conn->max_xmit_dlength = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len); | 
|  |  | 
|  | sess->initial_r2t_en = | 
|  | (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options)); | 
|  |  | 
|  | sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t); | 
|  |  | 
|  | sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options)); | 
|  |  | 
|  | sess->first_burst = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len); | 
|  |  | 
|  | sess->max_burst = BYTE_UNITS * | 
|  | le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len); | 
|  |  | 
|  | sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); | 
|  |  | 
|  | sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain); | 
|  |  | 
|  | sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); | 
|  |  | 
|  | memcpy(sess->initiatorname, ha->name_string, | 
|  | min(sizeof(ha->name_string), sizeof(sess->initiatorname))); | 
|  |  | 
|  | iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS, | 
|  | (char *)fw_ddb_entry->iscsi_alias, 0); | 
|  |  | 
|  | exit_session_conn_param: | 
|  | if (fw_ddb_entry) | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | fw_ddb_entry, fw_ddb_entry_dma); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Timer routines | 
|  | */ | 
|  |  | 
|  | static void qla4xxx_start_timer(struct scsi_qla_host *ha, void *func, | 
|  | unsigned long interval) | 
|  | { | 
|  | DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n", | 
|  | __func__, ha->host->host_no)); | 
|  | init_timer(&ha->timer); | 
|  | ha->timer.expires = jiffies + interval * HZ; | 
|  | ha->timer.data = (unsigned long)ha; | 
|  | ha->timer.function = (void (*)(unsigned long))func; | 
|  | add_timer(&ha->timer); | 
|  | ha->timer_active = 1; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_stop_timer(struct scsi_qla_host *ha) | 
|  | { | 
|  | del_timer_sync(&ha->timer); | 
|  | ha->timer_active = 0; | 
|  | } | 
|  |  | 
|  | /*** | 
|  | * qla4xxx_mark_device_missing - blocks the session | 
|  | * @cls_session: Pointer to the session to be blocked | 
|  | * @ddb_entry: Pointer to device database entry | 
|  | * | 
|  | * This routine marks a device missing and close connection. | 
|  | **/ | 
|  | void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session) | 
|  | { | 
|  | iscsi_block_session(cls_session); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_mark_all_devices_missing - mark all devices as missing. | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * | 
|  | * This routine marks a device missing and resets the relogin retry count. | 
|  | **/ | 
|  | void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha) | 
|  | { | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_mark_device_missing); | 
|  | } | 
|  |  | 
|  | static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, | 
|  | struct ddb_entry *ddb_entry, | 
|  | struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct srb *srb; | 
|  |  | 
|  | srb = mempool_alloc(ha->srb_mempool, GFP_ATOMIC); | 
|  | if (!srb) | 
|  | return srb; | 
|  |  | 
|  | kref_init(&srb->srb_ref); | 
|  | srb->ha = ha; | 
|  | srb->ddb = ddb_entry; | 
|  | srb->cmd = cmd; | 
|  | srb->flags = 0; | 
|  | CMD_SP(cmd) = (void *)srb; | 
|  |  | 
|  | return srb; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb) | 
|  | { | 
|  | struct scsi_cmnd *cmd = srb->cmd; | 
|  |  | 
|  | if (srb->flags & SRB_DMA_VALID) { | 
|  | scsi_dma_unmap(cmd); | 
|  | srb->flags &= ~SRB_DMA_VALID; | 
|  | } | 
|  | CMD_SP(cmd) = NULL; | 
|  | } | 
|  |  | 
|  | void qla4xxx_srb_compl(struct kref *ref) | 
|  | { | 
|  | struct srb *srb = container_of(ref, struct srb, srb_ref); | 
|  | struct scsi_cmnd *cmd = srb->cmd; | 
|  | struct scsi_qla_host *ha = srb->ha; | 
|  |  | 
|  | qla4xxx_srb_free_dma(ha, srb); | 
|  |  | 
|  | mempool_free(srb, ha->srb_mempool); | 
|  |  | 
|  | cmd->scsi_done(cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_queuecommand - scsi layer issues scsi command to driver. | 
|  | * @host: scsi host | 
|  | * @cmd: Pointer to Linux's SCSI command structure | 
|  | * | 
|  | * Remarks: | 
|  | * This routine is invoked by Linux to send a SCSI command to the driver. | 
|  | * The mid-level driver tries to ensure that queuecommand never gets | 
|  | * invoked concurrently with itself or the interrupt handler (although | 
|  | * the interrupt handler may call this routine as part of request- | 
|  | * completion handling).   Unfortunely, it sometimes calls the scheduler | 
|  | * in interrupt context which is a big NO! NO!. | 
|  | **/ | 
|  | static int qla4xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(host); | 
|  | struct ddb_entry *ddb_entry = cmd->device->hostdata; | 
|  | struct iscsi_cls_session *sess = ddb_entry->sess; | 
|  | struct srb *srb; | 
|  | int rval; | 
|  |  | 
|  | if (test_bit(AF_EEH_BUSY, &ha->flags)) { | 
|  | if (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags)) | 
|  | cmd->result = DID_NO_CONNECT << 16; | 
|  | else | 
|  | cmd->result = DID_REQUEUE << 16; | 
|  | goto qc_fail_command; | 
|  | } | 
|  |  | 
|  | if (!sess) { | 
|  | cmd->result = DID_IMM_RETRY << 16; | 
|  | goto qc_fail_command; | 
|  | } | 
|  |  | 
|  | rval = iscsi_session_chkready(sess); | 
|  | if (rval) { | 
|  | cmd->result = rval; | 
|  | goto qc_fail_command; | 
|  | } | 
|  |  | 
|  | if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA, &ha->dpc_flags) || | 
|  | test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || | 
|  | test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || | 
|  | !test_bit(AF_ONLINE, &ha->flags) || | 
|  | !test_bit(AF_LINK_UP, &ha->flags) || | 
|  | test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) | 
|  | goto qc_host_busy; | 
|  |  | 
|  | srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd); | 
|  | if (!srb) | 
|  | goto qc_host_busy; | 
|  |  | 
|  | rval = qla4xxx_send_command_to_isp(ha, srb); | 
|  | if (rval != QLA_SUCCESS) | 
|  | goto qc_host_busy_free_sp; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | qc_host_busy_free_sp: | 
|  | qla4xxx_srb_free_dma(ha, srb); | 
|  | mempool_free(srb, ha->srb_mempool); | 
|  |  | 
|  | qc_host_busy: | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | qc_fail_command: | 
|  | cmd->scsi_done(cmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_mem_free - frees memory allocated to adapter | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * | 
|  | * Frees memory previously allocated by qla4xxx_mem_alloc | 
|  | **/ | 
|  | static void qla4xxx_mem_free(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->queues) | 
|  | dma_free_coherent(&ha->pdev->dev, ha->queues_len, ha->queues, | 
|  | ha->queues_dma); | 
|  |  | 
|  | if (ha->fw_dump) | 
|  | vfree(ha->fw_dump); | 
|  |  | 
|  | ha->queues_len = 0; | 
|  | ha->queues = NULL; | 
|  | ha->queues_dma = 0; | 
|  | ha->request_ring = NULL; | 
|  | ha->request_dma = 0; | 
|  | ha->response_ring = NULL; | 
|  | ha->response_dma = 0; | 
|  | ha->shadow_regs = NULL; | 
|  | ha->shadow_regs_dma = 0; | 
|  | ha->fw_dump = NULL; | 
|  | ha->fw_dump_size = 0; | 
|  |  | 
|  | /* Free srb pool. */ | 
|  | if (ha->srb_mempool) | 
|  | mempool_destroy(ha->srb_mempool); | 
|  |  | 
|  | ha->srb_mempool = NULL; | 
|  |  | 
|  | if (ha->chap_dma_pool) | 
|  | dma_pool_destroy(ha->chap_dma_pool); | 
|  |  | 
|  | if (ha->chap_list) | 
|  | vfree(ha->chap_list); | 
|  | ha->chap_list = NULL; | 
|  |  | 
|  | if (ha->fw_ddb_dma_pool) | 
|  | dma_pool_destroy(ha->fw_ddb_dma_pool); | 
|  |  | 
|  | /* release io space registers  */ | 
|  | if (is_qla8022(ha)) { | 
|  | if (ha->nx_pcibase) | 
|  | iounmap( | 
|  | (struct device_reg_82xx __iomem *)ha->nx_pcibase); | 
|  | } else if (ha->reg) | 
|  | iounmap(ha->reg); | 
|  | pci_release_regions(ha->pdev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_mem_alloc - allocates memory for use by adapter. | 
|  | * @ha: Pointer to host adapter structure | 
|  | * | 
|  | * Allocates DMA memory for request and response queues. Also allocates memory | 
|  | * for srbs. | 
|  | **/ | 
|  | static int qla4xxx_mem_alloc(struct scsi_qla_host *ha) | 
|  | { | 
|  | unsigned long align; | 
|  |  | 
|  | /* Allocate contiguous block of DMA memory for queues. */ | 
|  | ha->queues_len = ((REQUEST_QUEUE_DEPTH * QUEUE_SIZE) + | 
|  | (RESPONSE_QUEUE_DEPTH * QUEUE_SIZE) + | 
|  | sizeof(struct shadow_regs) + | 
|  | MEM_ALIGN_VALUE + | 
|  | (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); | 
|  | ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len, | 
|  | &ha->queues_dma, GFP_KERNEL); | 
|  | if (ha->queues == NULL) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed - queues.\n"); | 
|  |  | 
|  | goto mem_alloc_error_exit; | 
|  | } | 
|  | memset(ha->queues, 0, ha->queues_len); | 
|  |  | 
|  | /* | 
|  | * As per RISC alignment requirements -- the bus-address must be a | 
|  | * multiple of the request-ring size (in bytes). | 
|  | */ | 
|  | align = 0; | 
|  | if ((unsigned long)ha->queues_dma & (MEM_ALIGN_VALUE - 1)) | 
|  | align = MEM_ALIGN_VALUE - ((unsigned long)ha->queues_dma & | 
|  | (MEM_ALIGN_VALUE - 1)); | 
|  |  | 
|  | /* Update request and response queue pointers. */ | 
|  | ha->request_dma = ha->queues_dma + align; | 
|  | ha->request_ring = (struct queue_entry *) (ha->queues + align); | 
|  | ha->response_dma = ha->queues_dma + align + | 
|  | (REQUEST_QUEUE_DEPTH * QUEUE_SIZE); | 
|  | ha->response_ring = (struct queue_entry *) (ha->queues + align + | 
|  | (REQUEST_QUEUE_DEPTH * | 
|  | QUEUE_SIZE)); | 
|  | ha->shadow_regs_dma = ha->queues_dma + align + | 
|  | (REQUEST_QUEUE_DEPTH * QUEUE_SIZE) + | 
|  | (RESPONSE_QUEUE_DEPTH * QUEUE_SIZE); | 
|  | ha->shadow_regs = (struct shadow_regs *) (ha->queues + align + | 
|  | (REQUEST_QUEUE_DEPTH * | 
|  | QUEUE_SIZE) + | 
|  | (RESPONSE_QUEUE_DEPTH * | 
|  | QUEUE_SIZE)); | 
|  |  | 
|  | /* Allocate memory for srb pool. */ | 
|  | ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab, | 
|  | mempool_free_slab, srb_cachep); | 
|  | if (ha->srb_mempool == NULL) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed - SRB Pool.\n"); | 
|  |  | 
|  | goto mem_alloc_error_exit; | 
|  | } | 
|  |  | 
|  | ha->chap_dma_pool = dma_pool_create("ql4_chap", &ha->pdev->dev, | 
|  | CHAP_DMA_BLOCK_SIZE, 8, 0); | 
|  |  | 
|  | if (ha->chap_dma_pool == NULL) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "%s: chap_dma_pool allocation failed..\n", __func__); | 
|  | goto mem_alloc_error_exit; | 
|  | } | 
|  |  | 
|  | ha->fw_ddb_dma_pool = dma_pool_create("ql4_fw_ddb", &ha->pdev->dev, | 
|  | DDB_DMA_BLOCK_SIZE, 8, 0); | 
|  |  | 
|  | if (ha->fw_ddb_dma_pool == NULL) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "%s: fw_ddb_dma_pool allocation failed..\n", | 
|  | __func__); | 
|  | goto mem_alloc_error_exit; | 
|  | } | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  |  | 
|  | mem_alloc_error_exit: | 
|  | qla4xxx_mem_free(ha); | 
|  | return QLA_ERROR; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4_8xxx_check_temp - Check the ISP82XX temperature. | 
|  | * @ha: adapter block pointer. | 
|  | * | 
|  | * Note: The caller should not hold the idc lock. | 
|  | **/ | 
|  | static int qla4_8xxx_check_temp(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t temp, temp_state, temp_val; | 
|  | int status = QLA_SUCCESS; | 
|  |  | 
|  | temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE); | 
|  |  | 
|  | temp_state = qla82xx_get_temp_state(temp); | 
|  | temp_val = qla82xx_get_temp_val(temp); | 
|  |  | 
|  | if (temp_state == QLA82XX_TEMP_PANIC) { | 
|  | ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C" | 
|  | " exceeds maximum allowed. Hardware has been shut" | 
|  | " down.\n", temp_val); | 
|  | status = QLA_ERROR; | 
|  | } else if (temp_state == QLA82XX_TEMP_WARN) { | 
|  | if (ha->temperature == QLA82XX_TEMP_NORMAL) | 
|  | ql4_printk(KERN_WARNING, ha, "Device temperature %d" | 
|  | " degrees C exceeds operating range." | 
|  | " Immediate action needed.\n", temp_val); | 
|  | } else { | 
|  | if (ha->temperature == QLA82XX_TEMP_WARN) | 
|  | ql4_printk(KERN_INFO, ha, "Device temperature is" | 
|  | " now %d degrees C in normal range.\n", | 
|  | temp_val); | 
|  | } | 
|  | ha->temperature = temp_state; | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4_8xxx_check_fw_alive  - Check firmware health | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * | 
|  | * Context: Interrupt | 
|  | **/ | 
|  | static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t fw_heartbeat_counter; | 
|  | int status = QLA_SUCCESS; | 
|  |  | 
|  | fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); | 
|  | /* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */ | 
|  | if (fw_heartbeat_counter == 0xffffffff) { | 
|  | DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen " | 
|  | "state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n", | 
|  | ha->host_no, __func__)); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | if (ha->fw_heartbeat_counter == fw_heartbeat_counter) { | 
|  | ha->seconds_since_last_heartbeat++; | 
|  | /* FW not alive after 2 seconds */ | 
|  | if (ha->seconds_since_last_heartbeat == 2) { | 
|  | ha->seconds_since_last_heartbeat = 0; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi(%ld): %s, Dumping hw/fw registers:\n " | 
|  | " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:" | 
|  | " 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:" | 
|  | " 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:" | 
|  | " 0x%x,\n PEG_NET_4_PC: 0x%x\n", | 
|  | ha->host_no, __func__, | 
|  | qla4_8xxx_rd_32(ha, | 
|  | QLA82XX_PEG_HALT_STATUS1), | 
|  | qla4_8xxx_rd_32(ha, | 
|  | QLA82XX_PEG_HALT_STATUS2), | 
|  | qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 + | 
|  | 0x3c), | 
|  | qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 + | 
|  | 0x3c), | 
|  | qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 + | 
|  | 0x3c), | 
|  | qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 + | 
|  | 0x3c), | 
|  | qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + | 
|  | 0x3c)); | 
|  | status = QLA_ERROR; | 
|  | } | 
|  | } else | 
|  | ha->seconds_since_last_heartbeat = 0; | 
|  |  | 
|  | ha->fw_heartbeat_counter = fw_heartbeat_counter; | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4_8xxx_watchdog - Poll dev state | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * | 
|  | * Context: Interrupt | 
|  | **/ | 
|  | void qla4_8xxx_watchdog(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t dev_state, halt_status; | 
|  |  | 
|  | /* don't poll if reset is going on */ | 
|  | if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA, &ha->dpc_flags) || | 
|  | test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) { | 
|  | dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); | 
|  |  | 
|  | if (qla4_8xxx_check_temp(ha)) { | 
|  | ql4_printk(KERN_INFO, ha, "disabling pause" | 
|  | " transmit on port 0 & 1.\n"); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, | 
|  | CRB_NIU_XG_PAUSE_CTL_P0 | | 
|  | CRB_NIU_XG_PAUSE_CTL_P1); | 
|  | set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } else if (dev_state == QLA82XX_DEV_NEED_RESET && | 
|  | !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { | 
|  | if (!ql4xdontresethba) { | 
|  | ql4_printk(KERN_INFO, ha, "%s: HW State: " | 
|  | "NEED RESET!\n", __func__); | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } | 
|  | } else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT && | 
|  | !test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) { | 
|  | ql4_printk(KERN_INFO, ha, "%s: HW State: NEED QUIES!\n", | 
|  | __func__); | 
|  | set_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } else  { | 
|  | /* Check firmware health */ | 
|  | if (qla4_8xxx_check_fw_alive(ha)) { | 
|  | ql4_printk(KERN_INFO, ha, "disabling pause" | 
|  | " transmit on port 0 & 1.\n"); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, | 
|  | CRB_NIU_XG_PAUSE_CTL_P0 | | 
|  | CRB_NIU_XG_PAUSE_CTL_P1); | 
|  | halt_status = qla4_8xxx_rd_32(ha, | 
|  | QLA82XX_PEG_HALT_STATUS1); | 
|  |  | 
|  | if (QLA82XX_FWERROR_CODE(halt_status) == 0x67) | 
|  | ql4_printk(KERN_ERR, ha, "%s:" | 
|  | " Firmware aborted with" | 
|  | " error code 0x00006700." | 
|  | " Device is being reset\n", | 
|  | __func__); | 
|  |  | 
|  | /* Since we cannot change dev_state in interrupt | 
|  | * context, set appropriate DPC flag then wakeup | 
|  | * DPC */ | 
|  | if (halt_status & HALT_STATUS_UNRECOVERABLE) | 
|  | set_bit(DPC_HA_UNRECOVERABLE, | 
|  | &ha->dpc_flags); | 
|  | else { | 
|  | ql4_printk(KERN_INFO, ha, "%s: detect " | 
|  | "abort needed!\n", __func__); | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | } | 
|  | qla4xxx_mailbox_premature_completion(ha); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | if (!(ddb_entry->ddb_type == FLASH_DDB)) | 
|  | return; | 
|  |  | 
|  | if (adapter_up(ha) && !test_bit(DF_RELOGIN, &ddb_entry->flags) && | 
|  | !iscsi_is_session_online(cls_sess)) { | 
|  | if (atomic_read(&ddb_entry->retry_relogin_timer) != | 
|  | INVALID_ENTRY) { | 
|  | if (atomic_read(&ddb_entry->retry_relogin_timer) == | 
|  | 0) { | 
|  | atomic_set(&ddb_entry->retry_relogin_timer, | 
|  | INVALID_ENTRY); | 
|  | set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); | 
|  | set_bit(DF_RELOGIN, &ddb_entry->flags); | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "%s: index [%d] login device\n", | 
|  | __func__, ddb_entry->fw_ddb_index)); | 
|  | } else | 
|  | atomic_dec(&ddb_entry->retry_relogin_timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Wait for relogin to timeout */ | 
|  | if (atomic_read(&ddb_entry->relogin_timer) && | 
|  | (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) { | 
|  | /* | 
|  | * If the relogin times out and the device is | 
|  | * still NOT ONLINE then try and relogin again. | 
|  | */ | 
|  | if (!iscsi_is_session_online(cls_sess)) { | 
|  | /* Reset retry relogin timer */ | 
|  | atomic_inc(&ddb_entry->relogin_retry_count); | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "%s: index[%d] relogin timed out-retrying" | 
|  | " relogin (%d), retry (%d)\n", __func__, | 
|  | ddb_entry->fw_ddb_index, | 
|  | atomic_read(&ddb_entry->relogin_retry_count), | 
|  | ddb_entry->default_time2wait + 4)); | 
|  | set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); | 
|  | atomic_set(&ddb_entry->retry_relogin_timer, | 
|  | ddb_entry->default_time2wait + 4); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_timer - checks every second for work to do. | 
|  | * @ha: Pointer to host adapter structure. | 
|  | **/ | 
|  | static void qla4xxx_timer(struct scsi_qla_host *ha) | 
|  | { | 
|  | int start_dpc = 0; | 
|  | uint16_t w; | 
|  |  | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_check_relogin_flash_ddb); | 
|  |  | 
|  | /* If we are in the middle of AER/EEH processing | 
|  | * skip any processing and reschedule the timer | 
|  | */ | 
|  | if (test_bit(AF_EEH_BUSY, &ha->flags)) { | 
|  | mod_timer(&ha->timer, jiffies + HZ); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Hardware read to trigger an EEH error during mailbox waits. */ | 
|  | if (!pci_channel_offline(ha->pdev)) | 
|  | pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); | 
|  |  | 
|  | if (is_qla8022(ha)) { | 
|  | qla4_8xxx_watchdog(ha); | 
|  | } | 
|  |  | 
|  | if (!is_qla8022(ha)) { | 
|  | /* Check for heartbeat interval. */ | 
|  | if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE && | 
|  | ha->heartbeat_interval != 0) { | 
|  | ha->seconds_since_last_heartbeat++; | 
|  | if (ha->seconds_since_last_heartbeat > | 
|  | ha->heartbeat_interval + 2) | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Process any deferred work. */ | 
|  | if (!list_empty(&ha->work_list)) | 
|  | start_dpc++; | 
|  |  | 
|  | /* Wakeup the dpc routine for this adapter, if needed. */ | 
|  | if (start_dpc || | 
|  | test_bit(DPC_RESET_HA, &ha->dpc_flags) || | 
|  | test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) || | 
|  | test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || | 
|  | test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) || | 
|  | test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) || | 
|  | test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || | 
|  | test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || | 
|  | test_bit(DPC_AEN, &ha->dpc_flags)) { | 
|  | DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" | 
|  | " - dpc flags = 0x%lx\n", | 
|  | ha->host_no, __func__, ha->dpc_flags)); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } | 
|  |  | 
|  | /* Reschedule timer thread to call us back in one second */ | 
|  | mod_timer(&ha->timer, jiffies + HZ); | 
|  |  | 
|  | DEBUG2(ha->seconds_since_last_intr++); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_cmd_wait - waits for all outstanding commands to complete | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * | 
|  | * This routine stalls the driver until all outstanding commands are returned. | 
|  | * Caller must release the Hardware Lock prior to calling this routine. | 
|  | **/ | 
|  | static int qla4xxx_cmd_wait(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t index = 0; | 
|  | unsigned long flags; | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | unsigned long wtime = jiffies + (WAIT_CMD_TOV * HZ); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "Wait up to %d seconds for cmds to " | 
|  | "complete\n", WAIT_CMD_TOV)); | 
|  |  | 
|  | while (!time_after_eq(jiffies, wtime)) { | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | /* Find a command that hasn't completed. */ | 
|  | for (index = 0; index < ha->host->can_queue; index++) { | 
|  | cmd = scsi_host_find_tag(ha->host, index); | 
|  | /* | 
|  | * We cannot just check if the index is valid, | 
|  | * becase if we are run from the scsi eh, then | 
|  | * the scsi/block layer is going to prevent | 
|  | * the tag from being released. | 
|  | */ | 
|  | if (cmd != NULL && CMD_SP(cmd)) | 
|  | break; | 
|  | } | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | /* If No Commands are pending, wait is complete */ | 
|  | if (index == ha->host->can_queue) | 
|  | return QLA_SUCCESS; | 
|  |  | 
|  | msleep(1000); | 
|  | } | 
|  | /* If we timed out on waiting for commands to come back | 
|  | * return ERROR. */ | 
|  | return QLA_ERROR; | 
|  | } | 
|  |  | 
|  | int qla4xxx_hw_reset(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t ctrl_status; | 
|  | unsigned long flags = 0; | 
|  |  | 
|  | DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__)); | 
|  |  | 
|  | if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  |  | 
|  | /* | 
|  | * If the SCSI Reset Interrupt bit is set, clear it. | 
|  | * Otherwise, the Soft Reset won't work. | 
|  | */ | 
|  | ctrl_status = readw(&ha->reg->ctrl_status); | 
|  | if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0) | 
|  | writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status); | 
|  |  | 
|  | /* Issue Soft Reset */ | 
|  | writel(set_rmask(CSR_SOFT_RESET), &ha->reg->ctrl_status); | 
|  | readl(&ha->reg->ctrl_status); | 
|  |  | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_soft_reset - performs soft reset. | 
|  | * @ha: Pointer to host adapter structure. | 
|  | **/ | 
|  | int qla4xxx_soft_reset(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t max_wait_time; | 
|  | unsigned long flags = 0; | 
|  | int status; | 
|  | uint32_t ctrl_status; | 
|  |  | 
|  | status = qla4xxx_hw_reset(ha); | 
|  | if (status != QLA_SUCCESS) | 
|  | return status; | 
|  |  | 
|  | status = QLA_ERROR; | 
|  | /* Wait until the Network Reset Intr bit is cleared */ | 
|  | max_wait_time = RESET_INTR_TOV; | 
|  | do { | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | ctrl_status = readw(&ha->reg->ctrl_status); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | if ((ctrl_status & CSR_NET_RESET_INTR) == 0) | 
|  | break; | 
|  |  | 
|  | msleep(1000); | 
|  | } while ((--max_wait_time)); | 
|  |  | 
|  | if ((ctrl_status & CSR_NET_RESET_INTR) != 0) { | 
|  | DEBUG2(printk(KERN_WARNING | 
|  | "scsi%ld: Network Reset Intr not cleared by " | 
|  | "Network function, clearing it now!\n", | 
|  | ha->host_no)); | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | writel(set_rmask(CSR_NET_RESET_INTR), &ha->reg->ctrl_status); | 
|  | readl(&ha->reg->ctrl_status); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  | } | 
|  |  | 
|  | /* Wait until the firmware tells us the Soft Reset is done */ | 
|  | max_wait_time = SOFT_RESET_TOV; | 
|  | do { | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | ctrl_status = readw(&ha->reg->ctrl_status); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | if ((ctrl_status & CSR_SOFT_RESET) == 0) { | 
|  | status = QLA_SUCCESS; | 
|  | break; | 
|  | } | 
|  |  | 
|  | msleep(1000); | 
|  | } while ((--max_wait_time)); | 
|  |  | 
|  | /* | 
|  | * Also, make sure that the SCSI Reset Interrupt bit has been cleared | 
|  | * after the soft reset has taken place. | 
|  | */ | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | ctrl_status = readw(&ha->reg->ctrl_status); | 
|  | if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0) { | 
|  | writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status); | 
|  | readl(&ha->reg->ctrl_status); | 
|  | } | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | /* If soft reset fails then most probably the bios on other | 
|  | * function is also enabled. | 
|  | * Since the initialization is sequential the other fn | 
|  | * wont be able to acknowledge the soft reset. | 
|  | * Issue a force soft reset to workaround this scenario. | 
|  | */ | 
|  | if (max_wait_time == 0) { | 
|  | /* Issue Force Soft Reset */ | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | writel(set_rmask(CSR_FORCE_SOFT_RESET), &ha->reg->ctrl_status); | 
|  | readl(&ha->reg->ctrl_status); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  | /* Wait until the firmware tells us the Soft Reset is done */ | 
|  | max_wait_time = SOFT_RESET_TOV; | 
|  | do { | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | ctrl_status = readw(&ha->reg->ctrl_status); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | if ((ctrl_status & CSR_FORCE_SOFT_RESET) == 0) { | 
|  | status = QLA_SUCCESS; | 
|  | break; | 
|  | } | 
|  |  | 
|  | msleep(1000); | 
|  | } while ((--max_wait_time)); | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_abort_active_cmds - returns all outstanding i/o requests to O.S. | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * @res: returned scsi status | 
|  | * | 
|  | * This routine is called just prior to a HARD RESET to return all | 
|  | * outstanding commands back to the Operating System. | 
|  | * Caller should make sure that the following locks are released | 
|  | * before this calling routine: Hardware lock, and io_request_lock. | 
|  | **/ | 
|  | static void qla4xxx_abort_active_cmds(struct scsi_qla_host *ha, int res) | 
|  | { | 
|  | struct srb *srb; | 
|  | int i; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | for (i = 0; i < ha->host->can_queue; i++) { | 
|  | srb = qla4xxx_del_from_active_array(ha, i); | 
|  | if (srb != NULL) { | 
|  | srb->cmd->result = res; | 
|  | kref_put(&srb->srb_ref, qla4xxx_srb_compl); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  | } | 
|  |  | 
|  | void qla4xxx_dead_adapter_cleanup(struct scsi_qla_host *ha) | 
|  | { | 
|  | clear_bit(AF_ONLINE, &ha->flags); | 
|  |  | 
|  | /* Disable the board */ | 
|  | ql4_printk(KERN_INFO, ha, "Disabling the board\n"); | 
|  |  | 
|  | qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16); | 
|  | qla4xxx_mark_all_devices_missing(ha); | 
|  | clear_bit(AF_INIT_DONE, &ha->flags); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  |  | 
|  | sess = cls_session->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED; | 
|  |  | 
|  | if (ddb_entry->ddb_type == FLASH_DDB) | 
|  | iscsi_block_session(ddb_entry->sess); | 
|  | else | 
|  | iscsi_session_failure(cls_session->dd_data, | 
|  | ISCSI_ERR_CONN_FAILED); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_recover_adapter - recovers adapter after a fatal error | 
|  | * @ha: Pointer to host adapter structure. | 
|  | **/ | 
|  | static int qla4xxx_recover_adapter(struct scsi_qla_host *ha) | 
|  | { | 
|  | int status = QLA_ERROR; | 
|  | uint8_t reset_chip = 0; | 
|  | uint32_t dev_state; | 
|  | unsigned long wait; | 
|  |  | 
|  | /* Stall incoming I/O until we are done */ | 
|  | scsi_block_requests(ha->host); | 
|  | clear_bit(AF_ONLINE, &ha->flags); | 
|  | clear_bit(AF_LINK_UP, &ha->flags); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__)); | 
|  |  | 
|  | set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); | 
|  |  | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_fail_session); | 
|  |  | 
|  | if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) | 
|  | reset_chip = 1; | 
|  |  | 
|  | /* For the DPC_RESET_HA_INTR case (ISP-4xxx specific) | 
|  | * do not reset adapter, jump to initialize_adapter */ | 
|  | if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { | 
|  | status = QLA_SUCCESS; | 
|  | goto recover_ha_init_adapter; | 
|  | } | 
|  |  | 
|  | /* For the ISP-82xx adapter, issue a stop_firmware if invoked | 
|  | * from eh_host_reset or ioctl module */ | 
|  | if (is_qla8022(ha) && !reset_chip && | 
|  | test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) { | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld: %s - Performing stop_firmware...\n", | 
|  | ha->host_no, __func__)); | 
|  | status = ha->isp_ops->reset_firmware(ha); | 
|  | if (status == QLA_SUCCESS) { | 
|  | if (!test_bit(AF_FW_RECOVERY, &ha->flags)) | 
|  | qla4xxx_cmd_wait(ha); | 
|  | ha->isp_ops->disable_intrs(ha); | 
|  | qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); | 
|  | qla4xxx_abort_active_cmds(ha, DID_RESET << 16); | 
|  | } else { | 
|  | /* If the stop_firmware fails then | 
|  | * reset the entire chip */ | 
|  | reset_chip = 1; | 
|  | clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Issue full chip reset if recovering from a catastrophic error, | 
|  | * or if stop_firmware fails for ISP-82xx. | 
|  | * This is the default case for ISP-4xxx */ | 
|  | if (!is_qla8022(ha) || reset_chip) { | 
|  | if (!is_qla8022(ha)) | 
|  | goto chip_reset; | 
|  |  | 
|  | /* Check if 82XX firmware is alive or not | 
|  | * We may have arrived here from NEED_RESET | 
|  | * detection only */ | 
|  | if (test_bit(AF_FW_RECOVERY, &ha->flags)) | 
|  | goto chip_reset; | 
|  |  | 
|  | wait = jiffies + (FW_ALIVE_WAIT_TOV * HZ); | 
|  | while (time_before(jiffies, wait)) { | 
|  | if (qla4_8xxx_check_fw_alive(ha)) { | 
|  | qla4xxx_mailbox_premature_completion(ha); | 
|  | break; | 
|  | } | 
|  |  | 
|  | set_current_state(TASK_UNINTERRUPTIBLE); | 
|  | schedule_timeout(HZ); | 
|  | } | 
|  |  | 
|  | if (!test_bit(AF_FW_RECOVERY, &ha->flags)) | 
|  | qla4xxx_cmd_wait(ha); | 
|  | chip_reset: | 
|  | qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); | 
|  | qla4xxx_abort_active_cmds(ha, DID_RESET << 16); | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld: %s - Performing chip reset..\n", | 
|  | ha->host_no, __func__)); | 
|  | status = ha->isp_ops->reset_chip(ha); | 
|  | } | 
|  |  | 
|  | /* Flush any pending ddb changed AENs */ | 
|  | qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); | 
|  |  | 
|  | recover_ha_init_adapter: | 
|  | /* Upon successful firmware/chip reset, re-initialize the adapter */ | 
|  | if (status == QLA_SUCCESS) { | 
|  | /* For ISP-4xxx, force function 1 to always initialize | 
|  | * before function 3 to prevent both funcions from | 
|  | * stepping on top of the other */ | 
|  | if (!is_qla8022(ha) && (ha->mac_index == 3)) | 
|  | ssleep(6); | 
|  |  | 
|  | /* NOTE: AF_ONLINE flag set upon successful completion of | 
|  | *       qla4xxx_initialize_adapter */ | 
|  | status = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); | 
|  | } | 
|  |  | 
|  | /* Retry failed adapter initialization, if necessary | 
|  | * Do not retry initialize_adapter for RESET_HA_INTR (ISP-4xxx specific) | 
|  | * case to prevent ping-pong resets between functions */ | 
|  | if (!test_bit(AF_ONLINE, &ha->flags) && | 
|  | !test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { | 
|  | /* Adapter initialization failed, see if we can retry | 
|  | * resetting the ha. | 
|  | * Since we don't want to block the DPC for too long | 
|  | * with multiple resets in the same thread, | 
|  | * utilize DPC to retry */ | 
|  | if (is_qla8022(ha)) { | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | if (dev_state == QLA82XX_DEV_FAILED) { | 
|  | ql4_printk(KERN_INFO, ha, "%s: don't retry " | 
|  | "recover adapter. H/W is in Failed " | 
|  | "state\n", __func__); | 
|  | qla4xxx_dead_adapter_cleanup(ha); | 
|  | clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA_FW_CONTEXT, | 
|  | &ha->dpc_flags); | 
|  | status = QLA_ERROR; | 
|  |  | 
|  | goto exit_recover; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) { | 
|  | ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES; | 
|  | DEBUG2(printk("scsi%ld: recover adapter - retrying " | 
|  | "(%d) more times\n", ha->host_no, | 
|  | ha->retry_reset_ha_cnt)); | 
|  | set_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); | 
|  | status = QLA_ERROR; | 
|  | } else { | 
|  | if (ha->retry_reset_ha_cnt > 0) { | 
|  | /* Schedule another Reset HA--DPC will retry */ | 
|  | ha->retry_reset_ha_cnt--; | 
|  | DEBUG2(printk("scsi%ld: recover adapter - " | 
|  | "retry remaining %d\n", | 
|  | ha->host_no, | 
|  | ha->retry_reset_ha_cnt)); | 
|  | status = QLA_ERROR; | 
|  | } | 
|  |  | 
|  | if (ha->retry_reset_ha_cnt == 0) { | 
|  | /* Recover adapter retries have been exhausted. | 
|  | * Adapter DEAD */ | 
|  | DEBUG2(printk("scsi%ld: recover adapter " | 
|  | "failed - board disabled\n", | 
|  | ha->host_no)); | 
|  | qla4xxx_dead_adapter_cleanup(ha); | 
|  | clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA_FW_CONTEXT, | 
|  | &ha->dpc_flags); | 
|  | status = QLA_ERROR; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | clear_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); | 
|  | clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); | 
|  | } | 
|  |  | 
|  | exit_recover: | 
|  | ha->adapter_error_count++; | 
|  |  | 
|  | if (test_bit(AF_ONLINE, &ha->flags)) | 
|  | ha->isp_ops->enable_intrs(ha); | 
|  |  | 
|  | scsi_unblock_requests(ha->host); | 
|  |  | 
|  | clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); | 
|  | DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no, | 
|  | status == QLA_ERROR ? "FAILED" : "SUCCEEDED")); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_session->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  | if (!iscsi_is_session_online(cls_session)) { | 
|  | if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" | 
|  | " unblock session\n", ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index); | 
|  | iscsi_unblock_session(ddb_entry->sess); | 
|  | } else { | 
|  | /* Trigger relogin */ | 
|  | if (ddb_entry->ddb_type == FLASH_DDB) { | 
|  | if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) | 
|  | qla4xxx_arm_relogin_timer(ddb_entry); | 
|  | } else | 
|  | iscsi_session_failure(cls_session->dd_data, | 
|  | ISCSI_ERR_CONN_FAILED); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_session->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" | 
|  | " unblock session\n", ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index); | 
|  |  | 
|  | iscsi_unblock_session(ddb_entry->sess); | 
|  |  | 
|  | /* Start scan target */ | 
|  | if (test_bit(AF_ONLINE, &ha->flags)) { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" | 
|  | " start scan\n", ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index); | 
|  | scsi_queue_work(ha->host, &ddb_entry->sess->scan_work); | 
|  | } | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_session->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" | 
|  | " unblock user space session\n", ha->host_no, __func__, | 
|  | ddb_entry->fw_ddb_index); | 
|  | iscsi_conn_start(ddb_entry->conn); | 
|  | iscsi_conn_login_event(ddb_entry->conn, | 
|  | ISCSI_CONN_STATE_LOGGED_IN); | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha) | 
|  | { | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) | 
|  | { | 
|  | uint16_t relogin_timer; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | relogin_timer = max(ddb_entry->default_relogin_timeout, | 
|  | (uint16_t)RELOGIN_TOV); | 
|  | atomic_set(&ddb_entry->relogin_timer, relogin_timer); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no, | 
|  | ddb_entry->fw_ddb_index, relogin_timer)); | 
|  |  | 
|  | qla4xxx_login_flash_ddb(cls_sess); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_dpc_relogin(struct iscsi_cls_session *cls_sess) | 
|  | { | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ha = ddb_entry->ha; | 
|  |  | 
|  | if (!(ddb_entry->ddb_type == FLASH_DDB)) | 
|  | return; | 
|  |  | 
|  | if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) && | 
|  | !iscsi_is_session_online(cls_sess)) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "relogin issued\n")); | 
|  | qla4xxx_relogin_flash_ddb(cls_sess); | 
|  | } | 
|  | } | 
|  |  | 
|  | void qla4xxx_wake_dpc(struct scsi_qla_host *ha) | 
|  | { | 
|  | if (ha->dpc_thread) | 
|  | queue_work(ha->dpc_thread, &ha->dpc_work); | 
|  | } | 
|  |  | 
|  | static struct qla4_work_evt * | 
|  | qla4xxx_alloc_work(struct scsi_qla_host *ha, uint32_t data_size, | 
|  | enum qla4_work_type type) | 
|  | { | 
|  | struct qla4_work_evt *e; | 
|  | uint32_t size = sizeof(struct qla4_work_evt) + data_size; | 
|  |  | 
|  | e = kzalloc(size, GFP_ATOMIC); | 
|  | if (!e) | 
|  | return NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&e->list); | 
|  | e->type = type; | 
|  | return e; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_post_work(struct scsi_qla_host *ha, | 
|  | struct qla4_work_evt *e) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ha->work_lock, flags); | 
|  | list_add_tail(&e->list, &ha->work_list); | 
|  | spin_unlock_irqrestore(&ha->work_lock, flags); | 
|  | qla4xxx_wake_dpc(ha); | 
|  | } | 
|  |  | 
|  | int qla4xxx_post_aen_work(struct scsi_qla_host *ha, | 
|  | enum iscsi_host_event_code aen_code, | 
|  | uint32_t data_size, uint8_t *data) | 
|  | { | 
|  | struct qla4_work_evt *e; | 
|  |  | 
|  | e = qla4xxx_alloc_work(ha, data_size, QLA4_EVENT_AEN); | 
|  | if (!e) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | e->u.aen.code = aen_code; | 
|  | e->u.aen.data_size = data_size; | 
|  | memcpy(e->u.aen.data, data, data_size); | 
|  |  | 
|  | qla4xxx_post_work(ha, e); | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | int qla4xxx_post_ping_evt_work(struct scsi_qla_host *ha, | 
|  | uint32_t status, uint32_t pid, | 
|  | uint32_t data_size, uint8_t *data) | 
|  | { | 
|  | struct qla4_work_evt *e; | 
|  |  | 
|  | e = qla4xxx_alloc_work(ha, data_size, QLA4_EVENT_PING_STATUS); | 
|  | if (!e) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | e->u.ping.status = status; | 
|  | e->u.ping.pid = pid; | 
|  | e->u.ping.data_size = data_size; | 
|  | memcpy(e->u.ping.data, data, data_size); | 
|  |  | 
|  | qla4xxx_post_work(ha, e); | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_do_work(struct scsi_qla_host *ha) | 
|  | { | 
|  | struct qla4_work_evt *e, *tmp; | 
|  | unsigned long flags; | 
|  | LIST_HEAD(work); | 
|  |  | 
|  | spin_lock_irqsave(&ha->work_lock, flags); | 
|  | list_splice_init(&ha->work_list, &work); | 
|  | spin_unlock_irqrestore(&ha->work_lock, flags); | 
|  |  | 
|  | list_for_each_entry_safe(e, tmp, &work, list) { | 
|  | list_del_init(&e->list); | 
|  |  | 
|  | switch (e->type) { | 
|  | case QLA4_EVENT_AEN: | 
|  | iscsi_post_host_event(ha->host_no, | 
|  | &qla4xxx_iscsi_transport, | 
|  | e->u.aen.code, | 
|  | e->u.aen.data_size, | 
|  | e->u.aen.data); | 
|  | break; | 
|  | case QLA4_EVENT_PING_STATUS: | 
|  | iscsi_ping_comp_event(ha->host_no, | 
|  | &qla4xxx_iscsi_transport, | 
|  | e->u.ping.status, | 
|  | e->u.ping.pid, | 
|  | e->u.ping.data_size, | 
|  | e->u.ping.data); | 
|  | break; | 
|  | default: | 
|  | ql4_printk(KERN_WARNING, ha, "event type: 0x%x not " | 
|  | "supported", e->type); | 
|  | } | 
|  | kfree(e); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_do_dpc - dpc routine | 
|  | * @data: in our case pointer to adapter structure | 
|  | * | 
|  | * This routine is a task that is schedule by the interrupt handler | 
|  | * to perform the background processing for interrupts.  We put it | 
|  | * on a task queue that is consumed whenever the scheduler runs; that's | 
|  | * so you can do anything (i.e. put the process to sleep etc).  In fact, | 
|  | * the mid-level tries to sleep when it reaches the driver threshold | 
|  | * "host->can_queue". This can cause a panic if we were in our interrupt code. | 
|  | **/ | 
|  | static void qla4xxx_do_dpc(struct work_struct *work) | 
|  | { | 
|  | struct scsi_qla_host *ha = | 
|  | container_of(work, struct scsi_qla_host, dpc_work); | 
|  | int status = QLA_ERROR; | 
|  |  | 
|  | DEBUG2(printk("scsi%ld: %s: DPC handler waking up." | 
|  | "flags = 0x%08lx, dpc_flags = 0x%08lx\n", | 
|  | ha->host_no, __func__, ha->flags, ha->dpc_flags)) | 
|  |  | 
|  | /* Initialization not yet finished. Don't do anything yet. */ | 
|  | if (!test_bit(AF_INIT_DONE, &ha->flags)) | 
|  | return; | 
|  |  | 
|  | if (test_bit(AF_EEH_BUSY, &ha->flags)) { | 
|  | DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n", | 
|  | ha->host_no, __func__, ha->flags)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* post events to application */ | 
|  | qla4xxx_do_work(ha); | 
|  |  | 
|  | if (is_qla8022(ha)) { | 
|  | if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) { | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, | 
|  | QLA82XX_DEV_FAILED); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | ql4_printk(KERN_INFO, ha, "HW State: FAILED\n"); | 
|  | qla4_8xxx_device_state_handler(ha); | 
|  | } | 
|  | if (test_and_clear_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) { | 
|  | qla4_8xxx_need_qsnt_handler(ha); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) && | 
|  | (test_bit(DPC_RESET_HA, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))) { | 
|  | if (ql4xdontresethba) { | 
|  | DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", | 
|  | ha->host_no, __func__)); | 
|  | clear_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); | 
|  | clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); | 
|  | goto dpc_post_reset_ha; | 
|  | } | 
|  | if (test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) || | 
|  | test_bit(DPC_RESET_HA, &ha->dpc_flags)) | 
|  | qla4xxx_recover_adapter(ha); | 
|  |  | 
|  | if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { | 
|  | uint8_t wait_time = RESET_INTR_TOV; | 
|  |  | 
|  | while ((readw(&ha->reg->ctrl_status) & | 
|  | (CSR_SOFT_RESET | CSR_FORCE_SOFT_RESET)) != 0) { | 
|  | if (--wait_time == 0) | 
|  | break; | 
|  | msleep(1000); | 
|  | } | 
|  | if (wait_time == 0) | 
|  | DEBUG2(printk("scsi%ld: %s: SR|FSR " | 
|  | "bit not cleared-- resetting\n", | 
|  | ha->host_no, __func__)); | 
|  | qla4xxx_abort_active_cmds(ha, DID_RESET << 16); | 
|  | if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) { | 
|  | qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); | 
|  | status = qla4xxx_recover_adapter(ha); | 
|  | } | 
|  | clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); | 
|  | if (status == QLA_SUCCESS) | 
|  | ha->isp_ops->enable_intrs(ha); | 
|  | } | 
|  | } | 
|  |  | 
|  | dpc_post_reset_ha: | 
|  | /* ---- process AEN? --- */ | 
|  | if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) | 
|  | qla4xxx_process_aen(ha, PROCESS_ALL_AENS); | 
|  |  | 
|  | /* ---- Get DHCP IP Address? --- */ | 
|  | if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) | 
|  | qla4xxx_get_dhcp_ip_address(ha); | 
|  |  | 
|  | /* ---- relogin device? --- */ | 
|  | if (adapter_up(ha) && | 
|  | test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) { | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_dpc_relogin); | 
|  | } | 
|  |  | 
|  | /* ---- link change? --- */ | 
|  | if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) { | 
|  | if (!test_bit(AF_LINK_UP, &ha->flags)) { | 
|  | /* ---- link down? --- */ | 
|  | qla4xxx_mark_all_devices_missing(ha); | 
|  | } else { | 
|  | /* ---- link up? --- * | 
|  | * F/W will auto login to all devices ONLY ONCE after | 
|  | * link up during driver initialization and runtime | 
|  | * fatal error recovery.  Therefore, the driver must | 
|  | * manually relogin to devices when recovering from | 
|  | * connection failures, logouts, expired KATO, etc. */ | 
|  | if (test_and_clear_bit(AF_BUILD_DDB_LIST, &ha->flags)) { | 
|  | qla4xxx_build_ddb_list(ha, ha->is_reset); | 
|  | iscsi_host_for_each_session(ha->host, | 
|  | qla4xxx_login_flash_ddb); | 
|  | } else | 
|  | qla4xxx_relogin_all_devices(ha); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_free_adapter - release the adapter | 
|  | * @ha: pointer to adapter structure | 
|  | **/ | 
|  | static void qla4xxx_free_adapter(struct scsi_qla_host *ha) | 
|  | { | 
|  | qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16); | 
|  |  | 
|  | if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) { | 
|  | /* Turn-off interrupts on the card. */ | 
|  | ha->isp_ops->disable_intrs(ha); | 
|  | } | 
|  |  | 
|  | /* Remove timer thread, if present */ | 
|  | if (ha->timer_active) | 
|  | qla4xxx_stop_timer(ha); | 
|  |  | 
|  | /* Kill the kernel thread for this host */ | 
|  | if (ha->dpc_thread) | 
|  | destroy_workqueue(ha->dpc_thread); | 
|  |  | 
|  | /* Kill the kernel thread for this host */ | 
|  | if (ha->task_wq) | 
|  | destroy_workqueue(ha->task_wq); | 
|  |  | 
|  | /* Put firmware in known state */ | 
|  | ha->isp_ops->reset_firmware(ha); | 
|  |  | 
|  | if (is_qla8022(ha)) { | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | qla4_8xxx_clear_drv_active(ha); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | } | 
|  |  | 
|  | /* Detach interrupts */ | 
|  | if (test_and_clear_bit(AF_IRQ_ATTACHED, &ha->flags)) | 
|  | qla4xxx_free_irqs(ha); | 
|  |  | 
|  | /* free extra memory */ | 
|  | qla4xxx_mem_free(ha); | 
|  | } | 
|  |  | 
|  | int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) | 
|  | { | 
|  | int status = 0; | 
|  | unsigned long mem_base, mem_len, db_base, db_len; | 
|  | struct pci_dev *pdev = ha->pdev; | 
|  |  | 
|  | status = pci_request_regions(pdev, DRIVER_NAME); | 
|  | if (status) { | 
|  | printk(KERN_WARNING | 
|  | "scsi(%ld) Failed to reserve PIO regions (%s) " | 
|  | "status=%d\n", ha->host_no, pci_name(pdev), status); | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n", | 
|  | __func__, pdev->revision)); | 
|  | ha->revision_id = pdev->revision; | 
|  |  | 
|  | /* remap phys address */ | 
|  | mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ | 
|  | mem_len = pci_resource_len(pdev, 0); | 
|  | DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n", | 
|  | __func__, mem_base, mem_len)); | 
|  |  | 
|  | /* mapping of pcibase pointer */ | 
|  | ha->nx_pcibase = (unsigned long)ioremap(mem_base, mem_len); | 
|  | if (!ha->nx_pcibase) { | 
|  | printk(KERN_ERR | 
|  | "cannot remap MMIO (%s), aborting\n", pci_name(pdev)); | 
|  | pci_release_regions(ha->pdev); | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | /* Mapping of IO base pointer, door bell read and write pointer */ | 
|  |  | 
|  | /* mapping of IO base pointer */ | 
|  | ha->qla4_8xxx_reg = | 
|  | (struct device_reg_82xx  __iomem *)((uint8_t *)ha->nx_pcibase + | 
|  | 0xbc000 + (ha->pdev->devfn << 11)); | 
|  |  | 
|  | db_base = pci_resource_start(pdev, 4);  /* doorbell is on bar 4 */ | 
|  | db_len = pci_resource_len(pdev, 4); | 
|  |  | 
|  | ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 : | 
|  | QLA82XX_CAM_RAM_DB2); | 
|  |  | 
|  | return 0; | 
|  | iospace_error_exit: | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /*** | 
|  | * qla4xxx_iospace_config - maps registers | 
|  | * @ha: pointer to adapter structure | 
|  | * | 
|  | * This routines maps HBA's registers from the pci address space | 
|  | * into the kernel virtual address space for memory mapped i/o. | 
|  | **/ | 
|  | int qla4xxx_iospace_config(struct scsi_qla_host *ha) | 
|  | { | 
|  | unsigned long pio, pio_len, pio_flags; | 
|  | unsigned long mmio, mmio_len, mmio_flags; | 
|  |  | 
|  | pio = pci_resource_start(ha->pdev, 0); | 
|  | pio_len = pci_resource_len(ha->pdev, 0); | 
|  | pio_flags = pci_resource_flags(ha->pdev, 0); | 
|  | if (pio_flags & IORESOURCE_IO) { | 
|  | if (pio_len < MIN_IOBASE_LEN) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "Invalid PCI I/O region size\n"); | 
|  | pio = 0; | 
|  | } | 
|  | } else { | 
|  | ql4_printk(KERN_WARNING, ha, "region #0 not a PIO resource\n"); | 
|  | pio = 0; | 
|  | } | 
|  |  | 
|  | /* Use MMIO operations for all accesses. */ | 
|  | mmio = pci_resource_start(ha->pdev, 1); | 
|  | mmio_len = pci_resource_len(ha->pdev, 1); | 
|  | mmio_flags = pci_resource_flags(ha->pdev, 1); | 
|  |  | 
|  | if (!(mmio_flags & IORESOURCE_MEM)) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "region #0 not an MMIO resource, aborting\n"); | 
|  |  | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | if (mmio_len < MIN_IOBASE_LEN) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "Invalid PCI mem region size, aborting\n"); | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | if (pci_request_regions(ha->pdev, DRIVER_NAME)) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "Failed to reserve PIO/MMIO regions\n"); | 
|  |  | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | ha->pio_address = pio; | 
|  | ha->pio_length = pio_len; | 
|  | ha->reg = ioremap(mmio, MIN_IOBASE_LEN); | 
|  | if (!ha->reg) { | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "cannot remap MMIO, aborting\n"); | 
|  |  | 
|  | goto iospace_error_exit; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | iospace_error_exit: | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static struct isp_operations qla4xxx_isp_ops = { | 
|  | .iospace_config         = qla4xxx_iospace_config, | 
|  | .pci_config             = qla4xxx_pci_config, | 
|  | .disable_intrs          = qla4xxx_disable_intrs, | 
|  | .enable_intrs           = qla4xxx_enable_intrs, | 
|  | .start_firmware         = qla4xxx_start_firmware, | 
|  | .intr_handler           = qla4xxx_intr_handler, | 
|  | .interrupt_service_routine = qla4xxx_interrupt_service_routine, | 
|  | .reset_chip             = qla4xxx_soft_reset, | 
|  | .reset_firmware         = qla4xxx_hw_reset, | 
|  | .queue_iocb             = qla4xxx_queue_iocb, | 
|  | .complete_iocb          = qla4xxx_complete_iocb, | 
|  | .rd_shdw_req_q_out      = qla4xxx_rd_shdw_req_q_out, | 
|  | .rd_shdw_rsp_q_in       = qla4xxx_rd_shdw_rsp_q_in, | 
|  | .get_sys_info           = qla4xxx_get_sys_info, | 
|  | }; | 
|  |  | 
|  | static struct isp_operations qla4_8xxx_isp_ops = { | 
|  | .iospace_config         = qla4_8xxx_iospace_config, | 
|  | .pci_config             = qla4_8xxx_pci_config, | 
|  | .disable_intrs          = qla4_8xxx_disable_intrs, | 
|  | .enable_intrs           = qla4_8xxx_enable_intrs, | 
|  | .start_firmware         = qla4_8xxx_load_risc, | 
|  | .intr_handler           = qla4_8xxx_intr_handler, | 
|  | .interrupt_service_routine = qla4_8xxx_interrupt_service_routine, | 
|  | .reset_chip             = qla4_8xxx_isp_reset, | 
|  | .reset_firmware         = qla4_8xxx_stop_firmware, | 
|  | .queue_iocb             = qla4_8xxx_queue_iocb, | 
|  | .complete_iocb          = qla4_8xxx_complete_iocb, | 
|  | .rd_shdw_req_q_out      = qla4_8xxx_rd_shdw_req_q_out, | 
|  | .rd_shdw_rsp_q_in       = qla4_8xxx_rd_shdw_rsp_q_in, | 
|  | .get_sys_info           = qla4_8xxx_get_sys_info, | 
|  | }; | 
|  |  | 
|  | uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha) | 
|  | { | 
|  | return (uint16_t)le32_to_cpu(ha->shadow_regs->req_q_out); | 
|  | } | 
|  |  | 
|  | uint16_t qla4_8xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha) | 
|  | { | 
|  | return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->req_q_out)); | 
|  | } | 
|  |  | 
|  | uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha) | 
|  | { | 
|  | return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in); | 
|  | } | 
|  |  | 
|  | uint16_t qla4_8xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha) | 
|  | { | 
|  | return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->rsp_q_in)); | 
|  | } | 
|  |  | 
|  | static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = data; | 
|  | char *str = buf; | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_ETH_FLAGS: | 
|  | rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT); | 
|  | break; | 
|  | case ISCSI_BOOT_ETH_INDEX: | 
|  | rc = sprintf(str, "0\n"); | 
|  | break; | 
|  | case ISCSI_BOOT_ETH_MAC: | 
|  | rc = sysfs_format_mac(str, ha->my_mac, | 
|  | MAC_ADDR_LEN); | 
|  | break; | 
|  | default: | 
|  | rc = -ENOSYS; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static umode_t qla4xxx_eth_get_attr_visibility(void *data, int type) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_ETH_FLAGS: | 
|  | case ISCSI_BOOT_ETH_MAC: | 
|  | case ISCSI_BOOT_ETH_INDEX: | 
|  | rc = S_IRUGO; | 
|  | break; | 
|  | default: | 
|  | rc = 0; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static ssize_t qla4xxx_show_boot_ini_info(void *data, int type, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = data; | 
|  | char *str = buf; | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_INI_INITIATOR_NAME: | 
|  | rc = sprintf(str, "%s\n", ha->name_string); | 
|  | break; | 
|  | default: | 
|  | rc = -ENOSYS; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static umode_t qla4xxx_ini_get_attr_visibility(void *data, int type) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_INI_INITIATOR_NAME: | 
|  | rc = S_IRUGO; | 
|  | break; | 
|  | default: | 
|  | rc = 0; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | qla4xxx_show_boot_tgt_info(struct ql4_boot_session_info *boot_sess, int type, | 
|  | char *buf) | 
|  | { | 
|  | struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0]; | 
|  | char *str = buf; | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_TGT_NAME: | 
|  | rc = sprintf(buf, "%s\n", (char *)&boot_sess->target_name); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_IP_ADDR: | 
|  | if (boot_sess->conn_list[0].dest_ipaddr.ip_type == 0x1) | 
|  | rc = sprintf(buf, "%pI4\n", | 
|  | &boot_conn->dest_ipaddr.ip_address); | 
|  | else | 
|  | rc = sprintf(str, "%pI6\n", | 
|  | &boot_conn->dest_ipaddr.ip_address); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_PORT: | 
|  | rc = sprintf(str, "%d\n", boot_conn->dest_port); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_CHAP_NAME: | 
|  | rc = sprintf(str,  "%.*s\n", | 
|  | boot_conn->chap.target_chap_name_length, | 
|  | (char *)&boot_conn->chap.target_chap_name); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_CHAP_SECRET: | 
|  | rc = sprintf(str,  "%.*s\n", | 
|  | boot_conn->chap.target_secret_length, | 
|  | (char *)&boot_conn->chap.target_secret); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_REV_CHAP_NAME: | 
|  | rc = sprintf(str,  "%.*s\n", | 
|  | boot_conn->chap.intr_chap_name_length, | 
|  | (char *)&boot_conn->chap.intr_chap_name); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_REV_CHAP_SECRET: | 
|  | rc = sprintf(str,  "%.*s\n", | 
|  | boot_conn->chap.intr_secret_length, | 
|  | (char *)&boot_conn->chap.intr_secret); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_FLAGS: | 
|  | rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT); | 
|  | break; | 
|  | case ISCSI_BOOT_TGT_NIC_ASSOC: | 
|  | rc = sprintf(str, "0\n"); | 
|  | break; | 
|  | default: | 
|  | rc = -ENOSYS; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static ssize_t qla4xxx_show_boot_tgt_pri_info(void *data, int type, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = data; | 
|  | struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_pri_sess); | 
|  |  | 
|  | return qla4xxx_show_boot_tgt_info(boot_sess, type, buf); | 
|  | } | 
|  |  | 
|  | static ssize_t qla4xxx_show_boot_tgt_sec_info(void *data, int type, char *buf) | 
|  | { | 
|  | struct scsi_qla_host *ha = data; | 
|  | struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_sec_sess); | 
|  |  | 
|  | return qla4xxx_show_boot_tgt_info(boot_sess, type, buf); | 
|  | } | 
|  |  | 
|  | static umode_t qla4xxx_tgt_get_attr_visibility(void *data, int type) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | switch (type) { | 
|  | case ISCSI_BOOT_TGT_NAME: | 
|  | case ISCSI_BOOT_TGT_IP_ADDR: | 
|  | case ISCSI_BOOT_TGT_PORT: | 
|  | case ISCSI_BOOT_TGT_CHAP_NAME: | 
|  | case ISCSI_BOOT_TGT_CHAP_SECRET: | 
|  | case ISCSI_BOOT_TGT_REV_CHAP_NAME: | 
|  | case ISCSI_BOOT_TGT_REV_CHAP_SECRET: | 
|  | case ISCSI_BOOT_TGT_NIC_ASSOC: | 
|  | case ISCSI_BOOT_TGT_FLAGS: | 
|  | rc = S_IRUGO; | 
|  | break; | 
|  | default: | 
|  | rc = 0; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_boot_release(void *data) | 
|  | { | 
|  | struct scsi_qla_host *ha = data; | 
|  |  | 
|  | scsi_host_put(ha->host); | 
|  | } | 
|  |  | 
|  | static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) | 
|  | { | 
|  | dma_addr_t buf_dma; | 
|  | uint32_t addr, pri_addr, sec_addr; | 
|  | uint32_t offset; | 
|  | uint16_t func_num; | 
|  | uint8_t val; | 
|  | uint8_t *buf = NULL; | 
|  | size_t size = 13 * sizeof(uint8_t); | 
|  | int ret = QLA_SUCCESS; | 
|  |  | 
|  | func_num = PCI_FUNC(ha->pdev->devfn); | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, "%s: Get FW boot info for 0x%x func %d\n", | 
|  | __func__, ha->pdev->device, func_num); | 
|  |  | 
|  | if (is_qla40XX(ha)) { | 
|  | if (func_num == 1) { | 
|  | addr = NVRAM_PORT0_BOOT_MODE; | 
|  | pri_addr = NVRAM_PORT0_BOOT_PRI_TGT; | 
|  | sec_addr = NVRAM_PORT0_BOOT_SEC_TGT; | 
|  | } else if (func_num == 3) { | 
|  | addr = NVRAM_PORT1_BOOT_MODE; | 
|  | pri_addr = NVRAM_PORT1_BOOT_PRI_TGT; | 
|  | sec_addr = NVRAM_PORT1_BOOT_SEC_TGT; | 
|  | } else { | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info; | 
|  | } | 
|  |  | 
|  | /* Check Boot Mode */ | 
|  | val = rd_nvram_byte(ha, addr); | 
|  | if (!(val & 0x07)) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Adapter boot " | 
|  | "options : 0x%x\n", __func__, val)); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info; | 
|  | } | 
|  |  | 
|  | /* get primary valid target index */ | 
|  | val = rd_nvram_byte(ha, pri_addr); | 
|  | if (val & BIT_7) | 
|  | ddb_index[0] = (val & 0x7f); | 
|  |  | 
|  | /* get secondary valid target index */ | 
|  | val = rd_nvram_byte(ha, sec_addr); | 
|  | if (val & BIT_7) | 
|  | ddb_index[1] = (val & 0x7f); | 
|  |  | 
|  | } else if (is_qla8022(ha)) { | 
|  | buf = dma_alloc_coherent(&ha->pdev->dev, size, | 
|  | &buf_dma, GFP_KERNEL); | 
|  | if (!buf) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer\n", | 
|  | __func__)); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info; | 
|  | } | 
|  |  | 
|  | if (ha->port_num == 0) | 
|  | offset = BOOT_PARAM_OFFSET_PORT0; | 
|  | else if (ha->port_num == 1) | 
|  | offset = BOOT_PARAM_OFFSET_PORT1; | 
|  | else { | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info_free; | 
|  | } | 
|  | addr = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_iscsi_param * 4) + | 
|  | offset; | 
|  | if (qla4xxx_get_flash(ha, buf_dma, addr, | 
|  | 13 * sizeof(uint8_t)) != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash" | 
|  | " failed\n", ha->host_no, __func__)); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info_free; | 
|  | } | 
|  | /* Check Boot Mode */ | 
|  | if (!(buf[1] & 0x07)) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "Firmware boot options" | 
|  | " : 0x%x\n", buf[1])); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info_free; | 
|  | } | 
|  |  | 
|  | /* get primary valid target index */ | 
|  | if (buf[2] & BIT_7) | 
|  | ddb_index[0] = buf[2] & 0x7f; | 
|  |  | 
|  | /* get secondary valid target index */ | 
|  | if (buf[11] & BIT_7) | 
|  | ddb_index[1] = buf[11] & 0x7f; | 
|  | } else { | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_info; | 
|  | } | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary target ID %d, Secondary" | 
|  | " target ID %d\n", __func__, ddb_index[0], | 
|  | ddb_index[1])); | 
|  |  | 
|  | exit_boot_info_free: | 
|  | dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); | 
|  | exit_boot_info: | 
|  | ha->pri_ddb_idx = ddb_index[0]; | 
|  | ha->sec_ddb_idx = ddb_index[1]; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_get_bidi_chap - Get a BIDI CHAP user and password | 
|  | * @ha: pointer to adapter structure | 
|  | * @username: CHAP username to be returned | 
|  | * @password: CHAP password to be returned | 
|  | * | 
|  | * If a boot entry has BIDI CHAP enabled then we need to set the BIDI CHAP | 
|  | * user and password in the sysfs entry in /sys/firmware/iscsi_boot#/. | 
|  | * So from the CHAP cache find the first BIDI CHAP entry and set it | 
|  | * to the boot record in sysfs. | 
|  | **/ | 
|  | static int qla4xxx_get_bidi_chap(struct scsi_qla_host *ha, char *username, | 
|  | char *password) | 
|  | { | 
|  | int i, ret = -EINVAL; | 
|  | int max_chap_entries = 0; | 
|  | struct ql4_chap_table *chap_table; | 
|  |  | 
|  | if (is_qla8022(ha)) | 
|  | max_chap_entries = (ha->hw.flt_chap_size / 2) / | 
|  | sizeof(struct ql4_chap_table); | 
|  | else | 
|  | max_chap_entries = MAX_CHAP_ENTRIES_40XX; | 
|  |  | 
|  | if (!ha->chap_list) { | 
|  | ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ha->chap_sem); | 
|  | for (i = 0; i < max_chap_entries; i++) { | 
|  | chap_table = (struct ql4_chap_table *)ha->chap_list + i; | 
|  | if (chap_table->cookie != | 
|  | __constant_cpu_to_le16(CHAP_VALID_COOKIE)) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (chap_table->flags & BIT_7) /* local */ | 
|  | continue; | 
|  |  | 
|  | if (!(chap_table->flags & BIT_6)) /* Not BIDI */ | 
|  | continue; | 
|  |  | 
|  | strncpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN); | 
|  | strncpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN); | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&ha->chap_sem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int qla4xxx_get_boot_target(struct scsi_qla_host *ha, | 
|  | struct ql4_boot_session_info *boot_sess, | 
|  | uint16_t ddb_index) | 
|  | { | 
|  | struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0]; | 
|  | struct dev_db_entry *fw_ddb_entry; | 
|  | dma_addr_t fw_ddb_entry_dma; | 
|  | uint16_t idx; | 
|  | uint16_t options; | 
|  | int ret = QLA_SUCCESS; | 
|  |  | 
|  | fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | &fw_ddb_entry_dma, GFP_KERNEL); | 
|  | if (!fw_ddb_entry) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, | 
|  | "%s: Unable to allocate dma buffer.\n", | 
|  | __func__)); | 
|  | ret = QLA_ERROR; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (qla4xxx_bootdb_by_index(ha, fw_ddb_entry, | 
|  | fw_ddb_entry_dma, ddb_index)) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: No Flash DDB found at " | 
|  | "index [%d]\n", __func__, ddb_index)); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_target; | 
|  | } | 
|  |  | 
|  | /* Update target name and IP from DDB */ | 
|  | memcpy(boot_sess->target_name, fw_ddb_entry->iscsi_name, | 
|  | min(sizeof(boot_sess->target_name), | 
|  | sizeof(fw_ddb_entry->iscsi_name))); | 
|  |  | 
|  | options = le16_to_cpu(fw_ddb_entry->options); | 
|  | if (options & DDB_OPT_IPV6_DEVICE) { | 
|  | memcpy(&boot_conn->dest_ipaddr.ip_address, | 
|  | &fw_ddb_entry->ip_addr[0], IPv6_ADDR_LEN); | 
|  | } else { | 
|  | boot_conn->dest_ipaddr.ip_type = 0x1; | 
|  | memcpy(&boot_conn->dest_ipaddr.ip_address, | 
|  | &fw_ddb_entry->ip_addr[0], IP_ADDR_LEN); | 
|  | } | 
|  |  | 
|  | boot_conn->dest_port = le16_to_cpu(fw_ddb_entry->port); | 
|  |  | 
|  | /* update chap information */ | 
|  | idx = __le16_to_cpu(fw_ddb_entry->chap_tbl_idx); | 
|  |  | 
|  | if (BIT_7 & le16_to_cpu(fw_ddb_entry->iscsi_options))	{ | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "Setting chap\n")); | 
|  |  | 
|  | ret = qla4xxx_get_chap(ha, (char *)&boot_conn->chap. | 
|  | target_chap_name, | 
|  | (char *)&boot_conn->chap.target_secret, | 
|  | idx); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_ERR, ha, "Failed to set chap\n"); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_target; | 
|  | } | 
|  |  | 
|  | boot_conn->chap.target_chap_name_length = QL4_CHAP_MAX_NAME_LEN; | 
|  | boot_conn->chap.target_secret_length = QL4_CHAP_MAX_SECRET_LEN; | 
|  | } | 
|  |  | 
|  | if (BIT_4 & le16_to_cpu(fw_ddb_entry->iscsi_options)) { | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "Setting BIDI chap\n")); | 
|  |  | 
|  | ret = qla4xxx_get_bidi_chap(ha, | 
|  | (char *)&boot_conn->chap.intr_chap_name, | 
|  | (char *)&boot_conn->chap.intr_secret); | 
|  |  | 
|  | if (ret) { | 
|  | ql4_printk(KERN_ERR, ha, "Failed to set BIDI chap\n"); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_boot_target; | 
|  | } | 
|  |  | 
|  | boot_conn->chap.intr_chap_name_length = QL4_CHAP_MAX_NAME_LEN; | 
|  | boot_conn->chap.intr_secret_length = QL4_CHAP_MAX_SECRET_LEN; | 
|  | } | 
|  |  | 
|  | exit_boot_target: | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), | 
|  | fw_ddb_entry, fw_ddb_entry_dma); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_get_boot_info(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint16_t ddb_index[2]; | 
|  | int ret = QLA_ERROR; | 
|  | int rval; | 
|  |  | 
|  | memset(ddb_index, 0, sizeof(ddb_index)); | 
|  | ddb_index[0] = 0xffff; | 
|  | ddb_index[1] = 0xffff; | 
|  | ret = get_fw_boot_info(ha, ddb_index); | 
|  | if (ret != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "%s: No boot target configured.\n", __func__)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (ql4xdisablesysfsboot) | 
|  | return QLA_SUCCESS; | 
|  |  | 
|  | if (ddb_index[0] == 0xffff) | 
|  | goto sec_target; | 
|  |  | 
|  | rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_pri_sess), | 
|  | ddb_index[0]); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary boot target not " | 
|  | "configured\n", __func__)); | 
|  | } else | 
|  | ret = QLA_SUCCESS; | 
|  |  | 
|  | sec_target: | 
|  | if (ddb_index[1] == 0xffff) | 
|  | goto exit_get_boot_info; | 
|  |  | 
|  | rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_sec_sess), | 
|  | ddb_index[1]); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Secondary boot target not" | 
|  | " configured\n", __func__)); | 
|  | } else | 
|  | ret = QLA_SUCCESS; | 
|  |  | 
|  | exit_get_boot_info: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) | 
|  | { | 
|  | struct iscsi_boot_kobj *boot_kobj; | 
|  |  | 
|  | if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | if (ql4xdisablesysfsboot) { | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "%s: syfsboot disabled - driver will trigger login " | 
|  | "and publish session for discovery .\n", __func__); | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no); | 
|  | if (!ha->boot_kset) | 
|  | goto kset_free; | 
|  |  | 
|  | if (!scsi_host_get(ha->host)) | 
|  | goto kset_free; | 
|  | boot_kobj = iscsi_boot_create_target(ha->boot_kset, 0, ha, | 
|  | qla4xxx_show_boot_tgt_pri_info, | 
|  | qla4xxx_tgt_get_attr_visibility, | 
|  | qla4xxx_boot_release); | 
|  | if (!boot_kobj) | 
|  | goto put_host; | 
|  |  | 
|  | if (!scsi_host_get(ha->host)) | 
|  | goto kset_free; | 
|  | boot_kobj = iscsi_boot_create_target(ha->boot_kset, 1, ha, | 
|  | qla4xxx_show_boot_tgt_sec_info, | 
|  | qla4xxx_tgt_get_attr_visibility, | 
|  | qla4xxx_boot_release); | 
|  | if (!boot_kobj) | 
|  | goto put_host; | 
|  |  | 
|  | if (!scsi_host_get(ha->host)) | 
|  | goto kset_free; | 
|  | boot_kobj = iscsi_boot_create_initiator(ha->boot_kset, 0, ha, | 
|  | qla4xxx_show_boot_ini_info, | 
|  | qla4xxx_ini_get_attr_visibility, | 
|  | qla4xxx_boot_release); | 
|  | if (!boot_kobj) | 
|  | goto put_host; | 
|  |  | 
|  | if (!scsi_host_get(ha->host)) | 
|  | goto kset_free; | 
|  | boot_kobj = iscsi_boot_create_ethernet(ha->boot_kset, 0, ha, | 
|  | qla4xxx_show_boot_eth_info, | 
|  | qla4xxx_eth_get_attr_visibility, | 
|  | qla4xxx_boot_release); | 
|  | if (!boot_kobj) | 
|  | goto put_host; | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  |  | 
|  | put_host: | 
|  | scsi_host_put(ha->host); | 
|  | kset_free: | 
|  | iscsi_boot_destroy_kset(ha->boot_kset); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * qla4xxx_create chap_list - Create CHAP list from FLASH | 
|  | * @ha: pointer to adapter structure | 
|  | * | 
|  | * Read flash and make a list of CHAP entries, during login when a CHAP entry | 
|  | * is received, it will be checked in this list. If entry exist then the CHAP | 
|  | * entry index is set in the DDB. If CHAP entry does not exist in this list | 
|  | * then a new entry is added in FLASH in CHAP table and the index obtained is | 
|  | * used in the DDB. | 
|  | **/ | 
|  | static void qla4xxx_create_chap_list(struct scsi_qla_host *ha) | 
|  | { | 
|  | int rval = 0; | 
|  | uint8_t *chap_flash_data = NULL; | 
|  | uint32_t offset; | 
|  | dma_addr_t chap_dma; | 
|  | uint32_t chap_size = 0; | 
|  |  | 
|  | if (is_qla40XX(ha)) | 
|  | chap_size = MAX_CHAP_ENTRIES_40XX  * | 
|  | sizeof(struct ql4_chap_table); | 
|  | else	/* Single region contains CHAP info for both | 
|  | * ports which is divided into half for each port. | 
|  | */ | 
|  | chap_size = ha->hw.flt_chap_size / 2; | 
|  |  | 
|  | chap_flash_data = dma_alloc_coherent(&ha->pdev->dev, chap_size, | 
|  | &chap_dma, GFP_KERNEL); | 
|  | if (!chap_flash_data) { | 
|  | ql4_printk(KERN_ERR, ha, "No memory for chap_flash_data\n"); | 
|  | return; | 
|  | } | 
|  | if (is_qla40XX(ha)) | 
|  | offset = FLASH_CHAP_OFFSET; | 
|  | else { | 
|  | offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2); | 
|  | if (ha->port_num == 1) | 
|  | offset += chap_size; | 
|  | } | 
|  |  | 
|  | rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size); | 
|  | if (rval != QLA_SUCCESS) | 
|  | goto exit_chap_list; | 
|  |  | 
|  | if (ha->chap_list == NULL) | 
|  | ha->chap_list = vmalloc(chap_size); | 
|  | if (ha->chap_list == NULL) { | 
|  | ql4_printk(KERN_ERR, ha, "No memory for ha->chap_list\n"); | 
|  | goto exit_chap_list; | 
|  | } | 
|  |  | 
|  | memcpy(ha->chap_list, chap_flash_data, chap_size); | 
|  |  | 
|  | exit_chap_list: | 
|  | dma_free_coherent(&ha->pdev->dev, chap_size, | 
|  | chap_flash_data, chap_dma); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_get_param_ddb(struct ddb_entry *ddb_entry, | 
|  | struct ql4_tuple_ddb *tddb) | 
|  | { | 
|  | struct scsi_qla_host *ha; | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct iscsi_cls_conn *cls_conn; | 
|  | struct iscsi_session *sess; | 
|  | struct iscsi_conn *conn; | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); | 
|  | ha = ddb_entry->ha; | 
|  | cls_sess = ddb_entry->sess; | 
|  | sess = cls_sess->dd_data; | 
|  | cls_conn = ddb_entry->conn; | 
|  | conn = cls_conn->dd_data; | 
|  |  | 
|  | tddb->tpgt = sess->tpgt; | 
|  | tddb->port = conn->persistent_port; | 
|  | strncpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE); | 
|  | strncpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry, | 
|  | struct ql4_tuple_ddb *tddb) | 
|  | { | 
|  | uint16_t options = 0; | 
|  |  | 
|  | tddb->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); | 
|  | memcpy(&tddb->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], | 
|  | min(sizeof(tddb->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); | 
|  |  | 
|  | options = le16_to_cpu(fw_ddb_entry->options); | 
|  | if (options & DDB_OPT_IPV6_DEVICE) | 
|  | sprintf(tddb->ip_addr, "%pI6", fw_ddb_entry->ip_addr); | 
|  | else | 
|  | sprintf(tddb->ip_addr, "%pI4", fw_ddb_entry->ip_addr); | 
|  |  | 
|  | tddb->port = le16_to_cpu(fw_ddb_entry->port); | 
|  | memcpy(&tddb->isid[0], &fw_ddb_entry->isid[0], sizeof(tddb->isid)); | 
|  | } | 
|  |  | 
|  | static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, | 
|  | struct ql4_tuple_ddb *old_tddb, | 
|  | struct ql4_tuple_ddb *new_tddb, | 
|  | uint8_t is_isid_compare) | 
|  | { | 
|  | if (strcmp(old_tddb->iscsi_name, new_tddb->iscsi_name)) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | if (strcmp(old_tddb->ip_addr, new_tddb->ip_addr)) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | if (old_tddb->port != new_tddb->port) | 
|  | return QLA_ERROR; | 
|  |  | 
|  | /* For multi sessions, driver generates the ISID, so do not compare | 
|  | * ISID in reset path since it would be a comparision between the | 
|  | * driver generated ISID and firmware generated ISID. This could | 
|  | * lead to adding duplicated DDBs in the list as driver generated | 
|  | * ISID would not match firmware generated ISID. | 
|  | */ | 
|  | if (is_isid_compare) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: old ISID [%02x%02x%02x" | 
|  | "%02x%02x%02x] New ISID [%02x%02x%02x%02x%02x%02x]\n", | 
|  | __func__, old_tddb->isid[5], old_tddb->isid[4], | 
|  | old_tddb->isid[3], old_tddb->isid[2], old_tddb->isid[1], | 
|  | old_tddb->isid[0], new_tddb->isid[5], new_tddb->isid[4], | 
|  | new_tddb->isid[3], new_tddb->isid[2], new_tddb->isid[1], | 
|  | new_tddb->isid[0])); | 
|  |  | 
|  | if (memcmp(&old_tddb->isid[0], &new_tddb->isid[0], | 
|  | sizeof(old_tddb->isid))) | 
|  | return QLA_ERROR; | 
|  | } | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Match Found, fw[%d,%d,%s,%s], [%d,%d,%s,%s]", | 
|  | old_tddb->port, old_tddb->tpgt, old_tddb->ip_addr, | 
|  | old_tddb->iscsi_name, new_tddb->port, new_tddb->tpgt, | 
|  | new_tddb->ip_addr, new_tddb->iscsi_name)); | 
|  |  | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_is_session_exists(struct scsi_qla_host *ha, | 
|  | struct dev_db_entry *fw_ddb_entry) | 
|  | { | 
|  | struct ddb_entry *ddb_entry; | 
|  | struct ql4_tuple_ddb *fw_tddb = NULL; | 
|  | struct ql4_tuple_ddb *tmp_tddb = NULL; | 
|  | int idx; | 
|  | int ret = QLA_ERROR; | 
|  |  | 
|  | fw_tddb = vzalloc(sizeof(*fw_tddb)); | 
|  | if (!fw_tddb) { | 
|  | DEBUG2(ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed.\n")); | 
|  | ret = QLA_SUCCESS; | 
|  | goto exit_check; | 
|  | } | 
|  |  | 
|  | tmp_tddb = vzalloc(sizeof(*tmp_tddb)); | 
|  | if (!tmp_tddb) { | 
|  | DEBUG2(ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed.\n")); | 
|  | ret = QLA_SUCCESS; | 
|  | goto exit_check; | 
|  | } | 
|  |  | 
|  | qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); | 
|  |  | 
|  | for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { | 
|  | ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); | 
|  | if (ddb_entry == NULL) | 
|  | continue; | 
|  |  | 
|  | qla4xxx_get_param_ddb(ddb_entry, tmp_tddb); | 
|  | if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb, false)) { | 
|  | ret = QLA_SUCCESS; /* found */ | 
|  | goto exit_check; | 
|  | } | 
|  | } | 
|  |  | 
|  | exit_check: | 
|  | if (fw_tddb) | 
|  | vfree(fw_tddb); | 
|  | if (tmp_tddb) | 
|  | vfree(tmp_tddb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_is_flash_ddb_exists(struct scsi_qla_host *ha, | 
|  | struct list_head *list_nt, | 
|  | struct dev_db_entry *fw_ddb_entry) | 
|  | { | 
|  | struct qla_ddb_index  *nt_ddb_idx, *nt_ddb_idx_tmp; | 
|  | struct ql4_tuple_ddb *fw_tddb = NULL; | 
|  | struct ql4_tuple_ddb *tmp_tddb = NULL; | 
|  | int ret = QLA_ERROR; | 
|  |  | 
|  | fw_tddb = vzalloc(sizeof(*fw_tddb)); | 
|  | if (!fw_tddb) { | 
|  | DEBUG2(ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed.\n")); | 
|  | ret = QLA_SUCCESS; | 
|  | goto exit_check; | 
|  | } | 
|  |  | 
|  | tmp_tddb = vzalloc(sizeof(*tmp_tddb)); | 
|  | if (!tmp_tddb) { | 
|  | DEBUG2(ql4_printk(KERN_WARNING, ha, | 
|  | "Memory Allocation failed.\n")); | 
|  | ret = QLA_SUCCESS; | 
|  | goto exit_check; | 
|  | } | 
|  |  | 
|  | qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); | 
|  |  | 
|  | list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { | 
|  | qla4xxx_convert_param_ddb(&nt_ddb_idx->fw_ddb, tmp_tddb); | 
|  | if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb, true)) { | 
|  | ret = QLA_SUCCESS; /* found */ | 
|  | goto exit_check; | 
|  | } | 
|  | } | 
|  |  | 
|  | exit_check: | 
|  | if (fw_tddb) | 
|  | vfree(fw_tddb); | 
|  | if (tmp_tddb) | 
|  | vfree(tmp_tddb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_free_ddb_list(struct list_head *list_ddb) | 
|  | { | 
|  | struct qla_ddb_index  *ddb_idx, *ddb_idx_tmp; | 
|  |  | 
|  | list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { | 
|  | list_del_init(&ddb_idx->list); | 
|  | vfree(ddb_idx); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha, | 
|  | struct dev_db_entry *fw_ddb_entry) | 
|  | { | 
|  | struct iscsi_endpoint *ep; | 
|  | struct sockaddr_in *addr; | 
|  | struct sockaddr_in6 *addr6; | 
|  | struct sockaddr *dst_addr; | 
|  | char *ip; | 
|  |  | 
|  | /* TODO: need to destroy on unload iscsi_endpoint*/ | 
|  | dst_addr = vmalloc(sizeof(*dst_addr)); | 
|  | if (!dst_addr) | 
|  | return NULL; | 
|  |  | 
|  | if (fw_ddb_entry->options & DDB_OPT_IPV6_DEVICE) { | 
|  | dst_addr->sa_family = AF_INET6; | 
|  | addr6 = (struct sockaddr_in6 *)dst_addr; | 
|  | ip = (char *)&addr6->sin6_addr; | 
|  | memcpy(ip, fw_ddb_entry->ip_addr, IPv6_ADDR_LEN); | 
|  | addr6->sin6_port = htons(le16_to_cpu(fw_ddb_entry->port)); | 
|  |  | 
|  | } else { | 
|  | dst_addr->sa_family = AF_INET; | 
|  | addr = (struct sockaddr_in *)dst_addr; | 
|  | ip = (char *)&addr->sin_addr; | 
|  | memcpy(ip, fw_ddb_entry->ip_addr, IP_ADDR_LEN); | 
|  | addr->sin_port = htons(le16_to_cpu(fw_ddb_entry->port)); | 
|  | } | 
|  |  | 
|  | ep = qla4xxx_ep_connect(ha->host, dst_addr, 0); | 
|  | vfree(dst_addr); | 
|  | return ep; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx) | 
|  | { | 
|  | if (ql4xdisablesysfsboot) | 
|  | return QLA_SUCCESS; | 
|  | if (idx == ha->pri_ddb_idx || idx == ha->sec_ddb_idx) | 
|  | return QLA_ERROR; | 
|  | return QLA_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, | 
|  | struct ddb_entry *ddb_entry) | 
|  | { | 
|  | uint16_t def_timeout; | 
|  |  | 
|  | ddb_entry->ddb_type = FLASH_DDB; | 
|  | ddb_entry->fw_ddb_index = INVALID_ENTRY; | 
|  | ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; | 
|  | ddb_entry->ha = ha; | 
|  | ddb_entry->unblock_sess = qla4xxx_unblock_flash_ddb; | 
|  | ddb_entry->ddb_change = qla4xxx_flash_ddb_change; | 
|  |  | 
|  | atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); | 
|  | atomic_set(&ddb_entry->relogin_timer, 0); | 
|  | atomic_set(&ddb_entry->relogin_retry_count, 0); | 
|  | def_timeout = le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); | 
|  | ddb_entry->default_relogin_timeout = | 
|  | (def_timeout > LOGIN_TOV) && (def_timeout < LOGIN_TOV * 10) ? | 
|  | def_timeout : LOGIN_TOV; | 
|  | ddb_entry->default_time2wait = | 
|  | le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t idx = 0; | 
|  | uint32_t ip_idx[IP_ADDR_COUNT] = {0, 1, 2, 3}; /* 4 IP interfaces */ | 
|  | uint32_t sts[MBOX_REG_COUNT]; | 
|  | uint32_t ip_state; | 
|  | unsigned long wtime; | 
|  | int ret; | 
|  |  | 
|  | wtime = jiffies + (HZ * IP_CONFIG_TOV); | 
|  | do { | 
|  | for (idx = 0; idx < IP_ADDR_COUNT; idx++) { | 
|  | if (ip_idx[idx] == -1) | 
|  | continue; | 
|  |  | 
|  | ret = qla4xxx_get_ip_state(ha, 0, ip_idx[idx], sts); | 
|  |  | 
|  | if (ret == QLA_ERROR) { | 
|  | ip_idx[idx] = -1; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ip_state = (sts[1] & IP_STATE_MASK) >> IP_STATE_SHIFT; | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Waiting for IP state for idx = %d, state = 0x%x\n", | 
|  | ip_idx[idx], ip_state)); | 
|  | if (ip_state == IP_ADDRSTATE_UNCONFIGURED || | 
|  | ip_state == IP_ADDRSTATE_INVALID || | 
|  | ip_state == IP_ADDRSTATE_PREFERRED || | 
|  | ip_state == IP_ADDRSTATE_DEPRICATED || | 
|  | ip_state == IP_ADDRSTATE_DISABLING) | 
|  | ip_idx[idx] = -1; | 
|  | } | 
|  |  | 
|  | /* Break if all IP states checked */ | 
|  | if ((ip_idx[0] == -1) && | 
|  | (ip_idx[1] == -1) && | 
|  | (ip_idx[2] == -1) && | 
|  | (ip_idx[3] == -1)) | 
|  | break; | 
|  | schedule_timeout_uninterruptible(HZ); | 
|  | } while (time_after(wtime, jiffies)); | 
|  | } | 
|  |  | 
|  | static void qla4xxx_build_st_list(struct scsi_qla_host *ha, | 
|  | struct list_head *list_st) | 
|  | { | 
|  | struct qla_ddb_index  *st_ddb_idx; | 
|  | int max_ddbs; | 
|  | int fw_idx_size; | 
|  | struct dev_db_entry *fw_ddb_entry; | 
|  | dma_addr_t fw_ddb_dma; | 
|  | int ret; | 
|  | uint32_t idx = 0, next_idx = 0; | 
|  | uint32_t state = 0, conn_err = 0; | 
|  | uint16_t conn_id = 0; | 
|  |  | 
|  | fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, | 
|  | &fw_ddb_dma); | 
|  | if (fw_ddb_entry == NULL) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); | 
|  | goto exit_st_list; | 
|  | } | 
|  |  | 
|  | max_ddbs =  is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : | 
|  | MAX_DEV_DB_ENTRIES; | 
|  | fw_idx_size = sizeof(struct qla_ddb_index); | 
|  |  | 
|  | for (idx = 0; idx < max_ddbs; idx = next_idx) { | 
|  | ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, | 
|  | NULL, &next_idx, &state, | 
|  | &conn_err, NULL, &conn_id); | 
|  | if (ret == QLA_ERROR) | 
|  | break; | 
|  |  | 
|  | /* Ignore DDB if invalid state (unassigned) */ | 
|  | if (state == DDB_DS_UNASSIGNED) | 
|  | goto continue_next_st; | 
|  |  | 
|  | /* Check if ST, add to the list_st */ | 
|  | if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) | 
|  | goto continue_next_st; | 
|  |  | 
|  | st_ddb_idx = vzalloc(fw_idx_size); | 
|  | if (!st_ddb_idx) | 
|  | break; | 
|  |  | 
|  | st_ddb_idx->fw_ddb_idx = idx; | 
|  |  | 
|  | list_add_tail(&st_ddb_idx->list, list_st); | 
|  | continue_next_st: | 
|  | if (next_idx == 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | exit_st_list: | 
|  | if (fw_ddb_entry) | 
|  | dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_remove_failed_ddb - Remove inactive or failed ddb from list | 
|  | * @ha: pointer to adapter structure | 
|  | * @list_ddb: List from which failed ddb to be removed | 
|  | * | 
|  | * Iterate over the list of DDBs and find and remove DDBs that are either in | 
|  | * no connection active state or failed state | 
|  | **/ | 
|  | static void qla4xxx_remove_failed_ddb(struct scsi_qla_host *ha, | 
|  | struct list_head *list_ddb) | 
|  | { | 
|  | struct qla_ddb_index  *ddb_idx, *ddb_idx_tmp; | 
|  | uint32_t next_idx = 0; | 
|  | uint32_t state = 0, conn_err = 0; | 
|  | int ret; | 
|  |  | 
|  | list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { | 
|  | ret = qla4xxx_get_fwddb_entry(ha, ddb_idx->fw_ddb_idx, | 
|  | NULL, 0, NULL, &next_idx, &state, | 
|  | &conn_err, NULL, NULL); | 
|  | if (ret == QLA_ERROR) | 
|  | continue; | 
|  |  | 
|  | if (state == DDB_DS_NO_CONNECTION_ACTIVE || | 
|  | state == DDB_DS_SESSION_FAILED) { | 
|  | list_del_init(&ddb_idx->list); | 
|  | vfree(ddb_idx); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qla4xxx_sess_conn_setup(struct scsi_qla_host *ha, | 
|  | struct dev_db_entry *fw_ddb_entry, | 
|  | int is_reset) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct iscsi_session *sess; | 
|  | struct iscsi_cls_conn *cls_conn; | 
|  | struct iscsi_endpoint *ep; | 
|  | uint16_t cmds_max = 32; | 
|  | uint16_t conn_id = 0; | 
|  | uint32_t initial_cmdsn = 0; | 
|  | int ret = QLA_SUCCESS; | 
|  |  | 
|  | struct ddb_entry *ddb_entry = NULL; | 
|  |  | 
|  | /* Create session object, with INVALID_ENTRY, | 
|  | * the targer_id would get set when we issue the login | 
|  | */ | 
|  | cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, ha->host, | 
|  | cmds_max, sizeof(struct ddb_entry), | 
|  | sizeof(struct ql4_task_data), | 
|  | initial_cmdsn, INVALID_ENTRY); | 
|  | if (!cls_sess) { | 
|  | ret = QLA_ERROR; | 
|  | goto exit_setup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * so calling module_put function to decrement the | 
|  | * reference count. | 
|  | **/ | 
|  | module_put(qla4xxx_iscsi_transport.owner); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb_entry = sess->dd_data; | 
|  | ddb_entry->sess = cls_sess; | 
|  |  | 
|  | cls_sess->recovery_tmo = ql4xsess_recovery_tmo; | 
|  | memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, | 
|  | sizeof(struct dev_db_entry)); | 
|  |  | 
|  | qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); | 
|  |  | 
|  | cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_id); | 
|  |  | 
|  | if (!cls_conn) { | 
|  | ret = QLA_ERROR; | 
|  | goto exit_setup; | 
|  | } | 
|  |  | 
|  | ddb_entry->conn = cls_conn; | 
|  |  | 
|  | /* Setup ep, for displaying attributes in sysfs */ | 
|  | ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); | 
|  | if (ep) { | 
|  | ep->conn = cls_conn; | 
|  | cls_conn->ep = ep; | 
|  | } else { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n")); | 
|  | ret = QLA_ERROR; | 
|  | goto exit_setup; | 
|  | } | 
|  |  | 
|  | /* Update sess/conn params */ | 
|  | qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); | 
|  |  | 
|  | if (is_reset == RESET_ADAPTER) { | 
|  | iscsi_block_session(cls_sess); | 
|  | /* Use the relogin path to discover new devices | 
|  | *  by short-circuting the logic of setting | 
|  | *  timer to relogin - instead set the flags | 
|  | *  to initiate login right away. | 
|  | */ | 
|  | set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); | 
|  | set_bit(DF_RELOGIN, &ddb_entry->flags); | 
|  | } | 
|  |  | 
|  | exit_setup: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_build_nt_list(struct scsi_qla_host *ha, | 
|  | struct list_head *list_nt, int is_reset) | 
|  | { | 
|  | struct dev_db_entry *fw_ddb_entry; | 
|  | dma_addr_t fw_ddb_dma; | 
|  | int max_ddbs; | 
|  | int fw_idx_size; | 
|  | int ret; | 
|  | uint32_t idx = 0, next_idx = 0; | 
|  | uint32_t state = 0, conn_err = 0; | 
|  | uint16_t conn_id = 0; | 
|  | struct qla_ddb_index  *nt_ddb_idx; | 
|  |  | 
|  | fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, | 
|  | &fw_ddb_dma); | 
|  | if (fw_ddb_entry == NULL) { | 
|  | DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); | 
|  | goto exit_nt_list; | 
|  | } | 
|  | max_ddbs =  is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : | 
|  | MAX_DEV_DB_ENTRIES; | 
|  | fw_idx_size = sizeof(struct qla_ddb_index); | 
|  |  | 
|  | for (idx = 0; idx < max_ddbs; idx = next_idx) { | 
|  | ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, | 
|  | NULL, &next_idx, &state, | 
|  | &conn_err, NULL, &conn_id); | 
|  | if (ret == QLA_ERROR) | 
|  | break; | 
|  |  | 
|  | if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) | 
|  | goto continue_next_nt; | 
|  |  | 
|  | /* Check if NT, then add to list it */ | 
|  | if (strlen((char *) fw_ddb_entry->iscsi_name) == 0) | 
|  | goto continue_next_nt; | 
|  |  | 
|  | if (!(state == DDB_DS_NO_CONNECTION_ACTIVE || | 
|  | state == DDB_DS_SESSION_FAILED)) | 
|  | goto continue_next_nt; | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Adding  DDB to session = 0x%x\n", idx)); | 
|  | if (is_reset == INIT_ADAPTER) { | 
|  | nt_ddb_idx = vmalloc(fw_idx_size); | 
|  | if (!nt_ddb_idx) | 
|  | break; | 
|  |  | 
|  | nt_ddb_idx->fw_ddb_idx = idx; | 
|  |  | 
|  | memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, | 
|  | sizeof(struct dev_db_entry)); | 
|  |  | 
|  | if (qla4xxx_is_flash_ddb_exists(ha, list_nt, | 
|  | fw_ddb_entry) == QLA_SUCCESS) { | 
|  | vfree(nt_ddb_idx); | 
|  | goto continue_next_nt; | 
|  | } | 
|  | list_add_tail(&nt_ddb_idx->list, list_nt); | 
|  | } else if (is_reset == RESET_ADAPTER) { | 
|  | if (qla4xxx_is_session_exists(ha, fw_ddb_entry) == | 
|  | QLA_SUCCESS) | 
|  | goto continue_next_nt; | 
|  | } | 
|  |  | 
|  | ret = qla4xxx_sess_conn_setup(ha, fw_ddb_entry, is_reset); | 
|  | if (ret == QLA_ERROR) | 
|  | goto exit_nt_list; | 
|  |  | 
|  | continue_next_nt: | 
|  | if (next_idx == 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | exit_nt_list: | 
|  | if (fw_ddb_entry) | 
|  | dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_build_ddb_list - Build ddb list and setup sessions | 
|  | * @ha: pointer to adapter structure | 
|  | * @is_reset: Is this init path or reset path | 
|  | * | 
|  | * Create a list of sendtargets (st) from firmware DDBs, issue send targets | 
|  | * using connection open, then create the list of normal targets (nt) | 
|  | * from firmware DDBs. Based on the list of nt setup session and connection | 
|  | * objects. | 
|  | **/ | 
|  | void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) | 
|  | { | 
|  | uint16_t tmo = 0; | 
|  | struct list_head list_st, list_nt; | 
|  | struct qla_ddb_index  *st_ddb_idx, *st_ddb_idx_tmp; | 
|  | unsigned long wtime; | 
|  |  | 
|  | if (!test_bit(AF_LINK_UP, &ha->flags)) { | 
|  | set_bit(AF_BUILD_DDB_LIST, &ha->flags); | 
|  | ha->is_reset = is_reset; | 
|  | return; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&list_st); | 
|  | INIT_LIST_HEAD(&list_nt); | 
|  |  | 
|  | qla4xxx_build_st_list(ha, &list_st); | 
|  |  | 
|  | /* Before issuing conn open mbox, ensure all IPs states are configured | 
|  | * Note, conn open fails if IPs are not configured | 
|  | */ | 
|  | qla4xxx_wait_for_ip_configuration(ha); | 
|  |  | 
|  | /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ | 
|  | list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { | 
|  | qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); | 
|  | } | 
|  |  | 
|  | /* Wait to ensure all sendtargets are done for min 12 sec wait */ | 
|  | tmo = ((ha->def_timeout > LOGIN_TOV) && | 
|  | (ha->def_timeout < LOGIN_TOV * 10) ? | 
|  | ha->def_timeout : LOGIN_TOV); | 
|  |  | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, | 
|  | "Default time to wait for build ddb %d\n", tmo)); | 
|  |  | 
|  | wtime = jiffies + (HZ * tmo); | 
|  | do { | 
|  | if (list_empty(&list_st)) | 
|  | break; | 
|  |  | 
|  | qla4xxx_remove_failed_ddb(ha, &list_st); | 
|  | schedule_timeout_uninterruptible(HZ / 10); | 
|  | } while (time_after(wtime, jiffies)); | 
|  |  | 
|  | /* Free up the sendtargets list */ | 
|  | qla4xxx_free_ddb_list(&list_st); | 
|  |  | 
|  | qla4xxx_build_nt_list(ha, &list_nt, is_reset); | 
|  |  | 
|  | qla4xxx_free_ddb_list(&list_nt); | 
|  |  | 
|  | qla4xxx_free_ddb_index(ha); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_probe_adapter - callback function to probe HBA | 
|  | * @pdev: pointer to pci_dev structure | 
|  | * @pci_device_id: pointer to pci_device entry | 
|  | * | 
|  | * This routine will probe for Qlogic 4xxx iSCSI host adapters. | 
|  | * It returns zero if successful. It also initializes all data necessary for | 
|  | * the driver. | 
|  | **/ | 
|  | static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | int ret = -ENODEV, status; | 
|  | struct Scsi_Host *host; | 
|  | struct scsi_qla_host *ha; | 
|  | uint8_t init_retry_count = 0; | 
|  | char buf[34]; | 
|  | struct qla4_8xxx_legacy_intr_set *nx_legacy_intr; | 
|  | uint32_t dev_state; | 
|  |  | 
|  | if (pci_enable_device(pdev)) | 
|  | return -1; | 
|  |  | 
|  | host = iscsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha), 0); | 
|  | if (host == NULL) { | 
|  | printk(KERN_WARNING | 
|  | "qla4xxx: Couldn't allocate host from scsi layer!\n"); | 
|  | goto probe_disable_device; | 
|  | } | 
|  |  | 
|  | /* Clear our data area */ | 
|  | ha = to_qla_host(host); | 
|  | memset(ha, 0, sizeof(*ha)); | 
|  |  | 
|  | /* Save the information from PCI BIOS.	*/ | 
|  | ha->pdev = pdev; | 
|  | ha->host = host; | 
|  | ha->host_no = host->host_no; | 
|  |  | 
|  | pci_enable_pcie_error_reporting(pdev); | 
|  |  | 
|  | /* Setup Runtime configurable options */ | 
|  | if (is_qla8022(ha)) { | 
|  | ha->isp_ops = &qla4_8xxx_isp_ops; | 
|  | rwlock_init(&ha->hw_lock); | 
|  | ha->qdr_sn_window = -1; | 
|  | ha->ddr_mn_window = -1; | 
|  | ha->curr_window = 255; | 
|  | ha->func_num = PCI_FUNC(ha->pdev->devfn); | 
|  | nx_legacy_intr = &legacy_intr[ha->func_num]; | 
|  | ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit; | 
|  | ha->nx_legacy_intr.tgt_status_reg = | 
|  | nx_legacy_intr->tgt_status_reg; | 
|  | ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg; | 
|  | ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg; | 
|  | } else { | 
|  | ha->isp_ops = &qla4xxx_isp_ops; | 
|  | } | 
|  |  | 
|  | /* Set EEH reset type to fundamental if required by hba */ | 
|  | if (is_qla8022(ha)) | 
|  | pdev->needs_freset = 1; | 
|  |  | 
|  | /* Configure PCI I/O space. */ | 
|  | ret = ha->isp_ops->iospace_config(ha); | 
|  | if (ret) | 
|  | goto probe_failed_ioconfig; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, "Found an ISP%04x, irq %d, iobase 0x%p\n", | 
|  | pdev->device, pdev->irq, ha->reg); | 
|  |  | 
|  | qla4xxx_config_dma_addressing(ha); | 
|  |  | 
|  | /* Initialize lists and spinlocks. */ | 
|  | INIT_LIST_HEAD(&ha->free_srb_q); | 
|  |  | 
|  | mutex_init(&ha->mbox_sem); | 
|  | mutex_init(&ha->chap_sem); | 
|  | init_completion(&ha->mbx_intr_comp); | 
|  | init_completion(&ha->disable_acb_comp); | 
|  |  | 
|  | spin_lock_init(&ha->hardware_lock); | 
|  |  | 
|  | /* Initialize work list */ | 
|  | INIT_LIST_HEAD(&ha->work_list); | 
|  |  | 
|  | /* Allocate dma buffers */ | 
|  | if (qla4xxx_mem_alloc(ha)) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "[ERROR] Failed to allocate memory for adapter\n"); | 
|  |  | 
|  | ret = -ENOMEM; | 
|  | goto probe_failed; | 
|  | } | 
|  |  | 
|  | host->cmd_per_lun = 3; | 
|  | host->max_channel = 0; | 
|  | host->max_lun = MAX_LUNS - 1; | 
|  | host->max_id = MAX_TARGETS; | 
|  | host->max_cmd_len = IOCB_MAX_CDB_LEN; | 
|  | host->can_queue = MAX_SRBS ; | 
|  | host->transportt = qla4xxx_scsi_transport; | 
|  |  | 
|  | ret = scsi_init_shared_tag_map(host, MAX_SRBS); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_WARNING, ha, | 
|  | "%s: scsi_init_shared_tag_map failed\n", __func__); | 
|  | goto probe_failed; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, ha); | 
|  |  | 
|  | ret = scsi_add_host(host, &pdev->dev); | 
|  | if (ret) | 
|  | goto probe_failed; | 
|  |  | 
|  | if (is_qla8022(ha)) | 
|  | (void) qla4_8xxx_get_flash_info(ha); | 
|  |  | 
|  | /* | 
|  | * Initialize the Host adapter request/response queues and | 
|  | * firmware | 
|  | * NOTE: interrupts enabled upon successful completion | 
|  | */ | 
|  | status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); | 
|  | while ((!test_bit(AF_ONLINE, &ha->flags)) && | 
|  | init_retry_count++ < MAX_INIT_RETRIES) { | 
|  |  | 
|  | if (is_qla8022(ha)) { | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | if (dev_state == QLA82XX_DEV_FAILED) { | 
|  | ql4_printk(KERN_WARNING, ha, "%s: don't retry " | 
|  | "initialize adapter. H/W is in failed state\n", | 
|  | __func__); | 
|  | break; | 
|  | } | 
|  | } | 
|  | DEBUG2(printk("scsi: %s: retrying adapter initialization " | 
|  | "(%d)\n", __func__, init_retry_count)); | 
|  |  | 
|  | if (ha->isp_ops->reset_chip(ha) == QLA_ERROR) | 
|  | continue; | 
|  |  | 
|  | status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); | 
|  | } | 
|  |  | 
|  | if (!test_bit(AF_ONLINE, &ha->flags)) { | 
|  | ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n"); | 
|  |  | 
|  | if (is_qla8022(ha) && ql4xdontresethba) { | 
|  | /* Put the device in failed state. */ | 
|  | DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n")); | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, | 
|  | QLA82XX_DEV_FAILED); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | } | 
|  | ret = -ENODEV; | 
|  | goto remove_host; | 
|  | } | 
|  |  | 
|  | /* Startup the kernel thread for this host adapter. */ | 
|  | DEBUG2(printk("scsi: %s: Starting kernel thread for " | 
|  | "qla4xxx_dpc\n", __func__)); | 
|  | sprintf(buf, "qla4xxx_%lu_dpc", ha->host_no); | 
|  | ha->dpc_thread = create_singlethread_workqueue(buf); | 
|  | if (!ha->dpc_thread) { | 
|  | ql4_printk(KERN_WARNING, ha, "Unable to start DPC thread!\n"); | 
|  | ret = -ENODEV; | 
|  | goto remove_host; | 
|  | } | 
|  | INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc); | 
|  |  | 
|  | sprintf(buf, "qla4xxx_%lu_task", ha->host_no); | 
|  | ha->task_wq = alloc_workqueue(buf, WQ_MEM_RECLAIM, 1); | 
|  | if (!ha->task_wq) { | 
|  | ql4_printk(KERN_WARNING, ha, "Unable to start task thread!\n"); | 
|  | ret = -ENODEV; | 
|  | goto remove_host; | 
|  | } | 
|  |  | 
|  | /* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc | 
|  | * (which is called indirectly by qla4xxx_initialize_adapter), | 
|  | * so that irqs will be registered after crbinit but before | 
|  | * mbx_intr_enable. | 
|  | */ | 
|  | if (!is_qla8022(ha)) { | 
|  | ret = qla4xxx_request_irqs(ha); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_WARNING, ha, "Failed to reserve " | 
|  | "interrupt %d already in use.\n", pdev->irq); | 
|  | goto remove_host; | 
|  | } | 
|  | } | 
|  |  | 
|  | pci_save_state(ha->pdev); | 
|  | ha->isp_ops->enable_intrs(ha); | 
|  |  | 
|  | /* Start timer thread. */ | 
|  | qla4xxx_start_timer(ha, qla4xxx_timer, 1); | 
|  |  | 
|  | set_bit(AF_INIT_DONE, &ha->flags); | 
|  |  | 
|  | qla4_8xxx_alloc_sysfs_attr(ha); | 
|  |  | 
|  | printk(KERN_INFO | 
|  | " QLogic iSCSI HBA Driver version: %s\n" | 
|  | "  QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n", | 
|  | qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev), | 
|  | ha->host_no, ha->firmware_version[0], ha->firmware_version[1], | 
|  | ha->patch_number, ha->build_number); | 
|  |  | 
|  | if (qla4xxx_setup_boot_info(ha)) | 
|  | ql4_printk(KERN_ERR, ha, | 
|  | "%s: No iSCSI boot target configured\n", __func__); | 
|  |  | 
|  | /* Perform the build ddb list and login to each */ | 
|  | qla4xxx_build_ddb_list(ha, INIT_ADAPTER); | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_login_flash_ddb); | 
|  |  | 
|  | qla4xxx_create_chap_list(ha); | 
|  |  | 
|  | qla4xxx_create_ifaces(ha); | 
|  | return 0; | 
|  |  | 
|  | remove_host: | 
|  | scsi_remove_host(ha->host); | 
|  |  | 
|  | probe_failed: | 
|  | qla4xxx_free_adapter(ha); | 
|  |  | 
|  | probe_failed_ioconfig: | 
|  | pci_disable_pcie_error_reporting(pdev); | 
|  | scsi_host_put(ha->host); | 
|  |  | 
|  | probe_disable_device: | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_prevent_other_port_reinit - prevent other port from re-initialize | 
|  | * @ha: pointer to adapter structure | 
|  | * | 
|  | * Mark the other ISP-4xxx port to indicate that the driver is being removed, | 
|  | * so that the other port will not re-initialize while in the process of | 
|  | * removing the ha due to driver unload or hba hotplug. | 
|  | **/ | 
|  | static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha) | 
|  | { | 
|  | struct scsi_qla_host *other_ha = NULL; | 
|  | struct pci_dev *other_pdev = NULL; | 
|  | int fn = ISP4XXX_PCI_FN_2; | 
|  |  | 
|  | /*iscsi function numbers for ISP4xxx is 1 and 3*/ | 
|  | if (PCI_FUNC(ha->pdev->devfn) & BIT_1) | 
|  | fn = ISP4XXX_PCI_FN_1; | 
|  |  | 
|  | other_pdev = | 
|  | pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus), | 
|  | ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn), | 
|  | fn)); | 
|  |  | 
|  | /* Get other_ha if other_pdev is valid and state is enable*/ | 
|  | if (other_pdev) { | 
|  | if (atomic_read(&other_pdev->enable_cnt)) { | 
|  | other_ha = pci_get_drvdata(other_pdev); | 
|  | if (other_ha) { | 
|  | set_bit(AF_HA_REMOVAL, &other_ha->flags); | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: " | 
|  | "Prevent %s reinit\n", __func__, | 
|  | dev_name(&other_ha->pdev->dev))); | 
|  | } | 
|  | } | 
|  | pci_dev_put(other_pdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qla4xxx_destroy_fw_ddb_session(struct scsi_qla_host *ha) | 
|  | { | 
|  | struct ddb_entry *ddb_entry; | 
|  | int options; | 
|  | int idx; | 
|  |  | 
|  | for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { | 
|  |  | 
|  | ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); | 
|  | if ((ddb_entry != NULL) && | 
|  | (ddb_entry->ddb_type == FLASH_DDB)) { | 
|  |  | 
|  | options = LOGOUT_OPTION_CLOSE_SESSION; | 
|  | if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) | 
|  | == QLA_ERROR) | 
|  | ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", | 
|  | __func__); | 
|  |  | 
|  | qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index); | 
|  | /* | 
|  | * we have decremented the reference count of the driver | 
|  | * when we setup the session to have the driver unload | 
|  | * to be seamless without actually destroying the | 
|  | * session | 
|  | **/ | 
|  | try_module_get(qla4xxx_iscsi_transport.owner); | 
|  | iscsi_destroy_endpoint(ddb_entry->conn->ep); | 
|  | qla4xxx_free_ddb(ha, ddb_entry); | 
|  | iscsi_session_teardown(ddb_entry->sess); | 
|  | } | 
|  | } | 
|  | } | 
|  | /** | 
|  | * qla4xxx_remove_adapter - calback function to remove adapter. | 
|  | * @pci_dev: PCI device pointer | 
|  | **/ | 
|  | static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) | 
|  | { | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | ha = pci_get_drvdata(pdev); | 
|  |  | 
|  | if (!is_qla8022(ha)) | 
|  | qla4xxx_prevent_other_port_reinit(ha); | 
|  |  | 
|  | /* destroy iface from sysfs */ | 
|  | qla4xxx_destroy_ifaces(ha); | 
|  |  | 
|  | if ((!ql4xdisablesysfsboot) && ha->boot_kset) | 
|  | iscsi_boot_destroy_kset(ha->boot_kset); | 
|  |  | 
|  | qla4xxx_destroy_fw_ddb_session(ha); | 
|  | qla4_8xxx_free_sysfs_attr(ha); | 
|  |  | 
|  | scsi_remove_host(ha->host); | 
|  |  | 
|  | qla4xxx_free_adapter(ha); | 
|  |  | 
|  | scsi_host_put(ha->host); | 
|  |  | 
|  | pci_disable_pcie_error_reporting(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_config_dma_addressing() - Configure OS DMA addressing method. | 
|  | * @ha: HA context | 
|  | * | 
|  | * At exit, the @ha's flags.enable_64bit_addressing set to indicated | 
|  | * supported addressing method. | 
|  | */ | 
|  | static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | /* Update our PCI device dma_mask for full 64 bit mask */ | 
|  | if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(64)) == 0) { | 
|  | if (pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) { | 
|  | dev_dbg(&ha->pdev->dev, | 
|  | "Failed to set 64 bit PCI consistent mask; " | 
|  | "using 32 bit.\n"); | 
|  | retval = pci_set_consistent_dma_mask(ha->pdev, | 
|  | DMA_BIT_MASK(32)); | 
|  | } | 
|  | } else | 
|  | retval = pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32)); | 
|  | } | 
|  |  | 
|  | static int qla4xxx_slave_alloc(struct scsi_device *sdev) | 
|  | { | 
|  | struct iscsi_cls_session *cls_sess; | 
|  | struct iscsi_session *sess; | 
|  | struct ddb_entry *ddb; | 
|  | int queue_depth = QL4_DEF_QDEPTH; | 
|  |  | 
|  | cls_sess = starget_to_session(sdev->sdev_target); | 
|  | sess = cls_sess->dd_data; | 
|  | ddb = sess->dd_data; | 
|  |  | 
|  | sdev->hostdata = ddb; | 
|  | sdev->tagged_supported = 1; | 
|  |  | 
|  | if (ql4xmaxqdepth != 0 && ql4xmaxqdepth <= 0xffffU) | 
|  | queue_depth = ql4xmaxqdepth; | 
|  |  | 
|  | scsi_activate_tcq(sdev, queue_depth); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | sdev->tagged_supported = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qla4xxx_slave_destroy(struct scsi_device *sdev) | 
|  | { | 
|  | scsi_deactivate_tcq(sdev, 1); | 
|  | } | 
|  |  | 
|  | static int qla4xxx_change_queue_depth(struct scsi_device *sdev, int qdepth, | 
|  | int reason) | 
|  | { | 
|  | if (!ql4xqfulltracking) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return iscsi_change_queue_depth(sdev, qdepth, reason); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_del_from_active_array - returns an active srb | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * @index: index into the active_array | 
|  | * | 
|  | * This routine removes and returns the srb at the specified index | 
|  | **/ | 
|  | struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha, | 
|  | uint32_t index) | 
|  | { | 
|  | struct srb *srb = NULL; | 
|  | struct scsi_cmnd *cmd = NULL; | 
|  |  | 
|  | cmd = scsi_host_find_tag(ha->host, index); | 
|  | if (!cmd) | 
|  | return srb; | 
|  |  | 
|  | srb = (struct srb *)CMD_SP(cmd); | 
|  | if (!srb) | 
|  | return srb; | 
|  |  | 
|  | /* update counters */ | 
|  | if (srb->flags & SRB_DMA_VALID) { | 
|  | ha->req_q_count += srb->iocb_cnt; | 
|  | ha->iocb_cnt -= srb->iocb_cnt; | 
|  | if (srb->cmd) | 
|  | srb->cmd->host_scribble = | 
|  | (unsigned char *)(unsigned long) MAX_SRBS; | 
|  | } | 
|  | return srb; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_wait_on_command - waits for command to be returned by firmware | 
|  | * @ha: Pointer to host adapter structure. | 
|  | * @cmd: Scsi Command to wait on. | 
|  | * | 
|  | * This routine waits for the command to be returned by the Firmware | 
|  | * for some max time. | 
|  | **/ | 
|  | static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha, | 
|  | struct scsi_cmnd *cmd) | 
|  | { | 
|  | int done = 0; | 
|  | struct srb *rp; | 
|  | uint32_t max_wait_time = EH_WAIT_CMD_TOV; | 
|  | int ret = SUCCESS; | 
|  |  | 
|  | /* Dont wait on command if PCI error is being handled | 
|  | * by PCI AER driver | 
|  | */ | 
|  | if (unlikely(pci_channel_offline(ha->pdev)) || | 
|  | (test_bit(AF_EEH_BUSY, &ha->flags))) { | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n", | 
|  | ha->host_no, __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | do { | 
|  | /* Checking to see if its returned to OS */ | 
|  | rp = (struct srb *) CMD_SP(cmd); | 
|  | if (rp == NULL) { | 
|  | done++; | 
|  | break; | 
|  | } | 
|  |  | 
|  | msleep(2000); | 
|  | } while (max_wait_time--); | 
|  |  | 
|  | return done; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_wait_for_hba_online - waits for HBA to come online | 
|  | * @ha: Pointer to host adapter structure | 
|  | **/ | 
|  | static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha) | 
|  | { | 
|  | unsigned long wait_online; | 
|  |  | 
|  | wait_online = jiffies + (HBA_ONLINE_TOV * HZ); | 
|  | while (time_before(jiffies, wait_online)) { | 
|  |  | 
|  | if (adapter_up(ha)) | 
|  | return QLA_SUCCESS; | 
|  |  | 
|  | msleep(2000); | 
|  | } | 
|  |  | 
|  | return QLA_ERROR; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_wait_for_commands - wait for active cmds to finish. | 
|  | * @ha: pointer to HBA | 
|  | * @t: target id | 
|  | * @l: lun id | 
|  | * | 
|  | * This function waits for all outstanding commands to a lun to complete. It | 
|  | * returns 0 if all pending commands are returned and 1 otherwise. | 
|  | **/ | 
|  | static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha, | 
|  | struct scsi_target *stgt, | 
|  | struct scsi_device *sdev) | 
|  | { | 
|  | int cnt; | 
|  | int status = 0; | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | /* | 
|  | * Waiting for all commands for the designated target or dev | 
|  | * in the active array | 
|  | */ | 
|  | for (cnt = 0; cnt < ha->host->can_queue; cnt++) { | 
|  | cmd = scsi_host_find_tag(ha->host, cnt); | 
|  | if (cmd && stgt == scsi_target(cmd->device) && | 
|  | (!sdev || sdev == cmd->device)) { | 
|  | if (!qla4xxx_eh_wait_on_command(ha, cmd)) { | 
|  | status++; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_abort - callback for abort task. | 
|  | * @cmd: Pointer to Linux's SCSI command structure | 
|  | * | 
|  | * This routine is called by the Linux OS to abort the specified | 
|  | * command. | 
|  | **/ | 
|  | static int qla4xxx_eh_abort(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(cmd->device->host); | 
|  | unsigned int id = cmd->device->id; | 
|  | unsigned int lun = cmd->device->lun; | 
|  | unsigned long flags; | 
|  | struct srb *srb = NULL; | 
|  | int ret = SUCCESS; | 
|  | int wait = 0; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld:%d:%d: Abort command issued cmd=%p\n", | 
|  | ha->host_no, id, lun, cmd); | 
|  |  | 
|  | spin_lock_irqsave(&ha->hardware_lock, flags); | 
|  | srb = (struct srb *) CMD_SP(cmd); | 
|  | if (!srb) { | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  | return SUCCESS; | 
|  | } | 
|  | kref_get(&srb->srb_ref); | 
|  | spin_unlock_irqrestore(&ha->hardware_lock, flags); | 
|  |  | 
|  | if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) { | 
|  | DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n", | 
|  | ha->host_no, id, lun)); | 
|  | ret = FAILED; | 
|  | } else { | 
|  | DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n", | 
|  | ha->host_no, id, lun)); | 
|  | wait = 1; | 
|  | } | 
|  |  | 
|  | kref_put(&srb->srb_ref, qla4xxx_srb_compl); | 
|  |  | 
|  | /* Wait for command to complete */ | 
|  | if (wait) { | 
|  | if (!qla4xxx_eh_wait_on_command(ha, cmd)) { | 
|  | DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n", | 
|  | ha->host_no, id, lun)); | 
|  | ret = FAILED; | 
|  | } | 
|  | } | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld:%d:%d: Abort command - %s\n", | 
|  | ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_device_reset - callback for target reset. | 
|  | * @cmd: Pointer to Linux's SCSI command structure | 
|  | * | 
|  | * This routine is called by the Linux OS to reset all luns on the | 
|  | * specified target. | 
|  | **/ | 
|  | static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(cmd->device->host); | 
|  | struct ddb_entry *ddb_entry = cmd->device->hostdata; | 
|  | int ret = FAILED, stat; | 
|  |  | 
|  | if (!ddb_entry) | 
|  | return ret; | 
|  |  | 
|  | ret = iscsi_block_scsi_eh(cmd); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = FAILED; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi%ld:%d:%d:%d: DEVICE RESET ISSUED.\n", ha->host_no, | 
|  | cmd->device->channel, cmd->device->id, cmd->device->lun); | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO | 
|  | "scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x," | 
|  | "dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no, | 
|  | cmd, jiffies, cmd->request->timeout / HZ, | 
|  | ha->dpc_flags, cmd->result, cmd->allowed)); | 
|  |  | 
|  | /* FIXME: wait for hba to go online */ | 
|  | stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun); | 
|  | if (stat != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_INFO, ha, "DEVICE RESET FAILED. %d\n", stat); | 
|  | goto eh_dev_reset_done; | 
|  | } | 
|  |  | 
|  | if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device), | 
|  | cmd->device)) { | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "DEVICE RESET FAILED - waiting for " | 
|  | "commands.\n"); | 
|  | goto eh_dev_reset_done; | 
|  | } | 
|  |  | 
|  | /* Send marker. */ | 
|  | if (qla4xxx_send_marker_iocb(ha, ddb_entry, cmd->device->lun, | 
|  | MM_LUN_RESET) != QLA_SUCCESS) | 
|  | goto eh_dev_reset_done; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi(%ld:%d:%d:%d): DEVICE RESET SUCCEEDED.\n", | 
|  | ha->host_no, cmd->device->channel, cmd->device->id, | 
|  | cmd->device->lun); | 
|  |  | 
|  | ret = SUCCESS; | 
|  |  | 
|  | eh_dev_reset_done: | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_target_reset - callback for target reset. | 
|  | * @cmd: Pointer to Linux's SCSI command structure | 
|  | * | 
|  | * This routine is called by the Linux OS to reset the target. | 
|  | **/ | 
|  | static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(cmd->device->host); | 
|  | struct ddb_entry *ddb_entry = cmd->device->hostdata; | 
|  | int stat, ret; | 
|  |  | 
|  | if (!ddb_entry) | 
|  | return FAILED; | 
|  |  | 
|  | ret = iscsi_block_scsi_eh(cmd); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | starget_printk(KERN_INFO, scsi_target(cmd->device), | 
|  | "WARM TARGET RESET ISSUED.\n"); | 
|  |  | 
|  | DEBUG2(printk(KERN_INFO | 
|  | "scsi%ld: TARGET_DEVICE_RESET cmd=%p jiffies = 0x%lx, " | 
|  | "to=%x,dpc_flags=%lx, status=%x allowed=%d\n", | 
|  | ha->host_no, cmd, jiffies, cmd->request->timeout / HZ, | 
|  | ha->dpc_flags, cmd->result, cmd->allowed)); | 
|  |  | 
|  | stat = qla4xxx_reset_target(ha, ddb_entry); | 
|  | if (stat != QLA_SUCCESS) { | 
|  | starget_printk(KERN_INFO, scsi_target(cmd->device), | 
|  | "WARM TARGET RESET FAILED.\n"); | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device), | 
|  | NULL)) { | 
|  | starget_printk(KERN_INFO, scsi_target(cmd->device), | 
|  | "WARM TARGET DEVICE RESET FAILED - " | 
|  | "waiting for commands.\n"); | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | /* Send marker. */ | 
|  | if (qla4xxx_send_marker_iocb(ha, ddb_entry, cmd->device->lun, | 
|  | MM_TGT_WARM_RESET) != QLA_SUCCESS) { | 
|  | starget_printk(KERN_INFO, scsi_target(cmd->device), | 
|  | "WARM TARGET DEVICE RESET FAILED - " | 
|  | "marker iocb failed.\n"); | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | starget_printk(KERN_INFO, scsi_target(cmd->device), | 
|  | "WARM TARGET RESET SUCCEEDED.\n"); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_is_eh_active - check if error handler is running | 
|  | * @shost: Pointer to SCSI Host struct | 
|  | * | 
|  | * This routine finds that if reset host is called in EH | 
|  | * scenario or from some application like sg_reset | 
|  | **/ | 
|  | static int qla4xxx_is_eh_active(struct Scsi_Host *shost) | 
|  | { | 
|  | if (shost->shost_state == SHOST_RECOVERY) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_eh_host_reset - kernel callback | 
|  | * @cmd: Pointer to Linux's SCSI command structure | 
|  | * | 
|  | * This routine is invoked by the Linux kernel to perform fatal error | 
|  | * recovery on the specified adapter. | 
|  | **/ | 
|  | static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | int return_status = FAILED; | 
|  | struct scsi_qla_host *ha; | 
|  |  | 
|  | ha = to_qla_host(cmd->device->host); | 
|  |  | 
|  | if (ql4xdontresethba) { | 
|  | DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", | 
|  | ha->host_no, __func__)); | 
|  |  | 
|  | /* Clear outstanding srb in queues */ | 
|  | if (qla4xxx_is_eh_active(cmd->device->host)) | 
|  | qla4xxx_abort_active_cmds(ha, DID_ABORT << 16); | 
|  |  | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, | 
|  | "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no, | 
|  | cmd->device->channel, cmd->device->id, cmd->device->lun); | 
|  |  | 
|  | if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) { | 
|  | DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host.  Adapter " | 
|  | "DEAD.\n", ha->host_no, cmd->device->channel, | 
|  | __func__)); | 
|  |  | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) { | 
|  | if (is_qla8022(ha)) | 
|  | set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); | 
|  | else | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | } | 
|  |  | 
|  | if (qla4xxx_recover_adapter(ha) == QLA_SUCCESS) | 
|  | return_status = SUCCESS; | 
|  |  | 
|  | ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n", | 
|  | return_status == FAILED ? "FAILED" : "SUCCEEDED"); | 
|  |  | 
|  | return return_status; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_context_reset(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t mbox_cmd[MBOX_REG_COUNT]; | 
|  | uint32_t mbox_sts[MBOX_REG_COUNT]; | 
|  | struct addr_ctrl_blk_def *acb = NULL; | 
|  | uint32_t acb_len = sizeof(struct addr_ctrl_blk_def); | 
|  | int rval = QLA_SUCCESS; | 
|  | dma_addr_t acb_dma; | 
|  |  | 
|  | acb = dma_alloc_coherent(&ha->pdev->dev, | 
|  | sizeof(struct addr_ctrl_blk_def), | 
|  | &acb_dma, GFP_KERNEL); | 
|  | if (!acb) { | 
|  | ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n", | 
|  | __func__); | 
|  | rval = -ENOMEM; | 
|  | goto exit_port_reset; | 
|  | } | 
|  |  | 
|  | memset(acb, 0, acb_len); | 
|  |  | 
|  | rval = qla4xxx_get_acb(ha, acb_dma, PRIMARI_ACB, acb_len); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | rval = -EIO; | 
|  | goto exit_free_acb; | 
|  | } | 
|  |  | 
|  | rval = qla4xxx_disable_acb(ha); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | rval = -EIO; | 
|  | goto exit_free_acb; | 
|  | } | 
|  |  | 
|  | wait_for_completion_timeout(&ha->disable_acb_comp, | 
|  | DISABLE_ACB_TOV * HZ); | 
|  |  | 
|  | rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | rval = -EIO; | 
|  | goto exit_free_acb; | 
|  | } | 
|  |  | 
|  | exit_free_acb: | 
|  | dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk_def), | 
|  | acb, acb_dma); | 
|  | exit_port_reset: | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s %s\n", __func__, | 
|  | rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED")); | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type) | 
|  | { | 
|  | struct scsi_qla_host *ha = to_qla_host(shost); | 
|  | int rval = QLA_SUCCESS; | 
|  |  | 
|  | if (ql4xdontresethba) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Don't Reset HBA\n", | 
|  | __func__)); | 
|  | rval = -EPERM; | 
|  | goto exit_host_reset; | 
|  | } | 
|  |  | 
|  | rval = qla4xxx_wait_for_hba_online(ha); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unable to reset host " | 
|  | "adapter\n", __func__)); | 
|  | rval = -EIO; | 
|  | goto exit_host_reset; | 
|  | } | 
|  |  | 
|  | if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) | 
|  | goto recover_adapter; | 
|  |  | 
|  | switch (reset_type) { | 
|  | case SCSI_ADAPTER_RESET: | 
|  | set_bit(DPC_RESET_HA, &ha->dpc_flags); | 
|  | break; | 
|  | case SCSI_FIRMWARE_RESET: | 
|  | if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) { | 
|  | if (is_qla8022(ha)) | 
|  | /* set firmware context reset */ | 
|  | set_bit(DPC_RESET_HA_FW_CONTEXT, | 
|  | &ha->dpc_flags); | 
|  | else { | 
|  | rval = qla4xxx_context_reset(ha); | 
|  | goto exit_host_reset; | 
|  | } | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | recover_adapter: | 
|  | rval = qla4xxx_recover_adapter(ha); | 
|  | if (rval != QLA_SUCCESS) { | 
|  | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: recover adapter fail\n", | 
|  | __func__)); | 
|  | rval = -EIO; | 
|  | } | 
|  |  | 
|  | exit_host_reset: | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | /* PCI AER driver recovers from all correctable errors w/o | 
|  | * driver intervention. For uncorrectable errors PCI AER | 
|  | * driver calls the following device driver's callbacks | 
|  | * | 
|  | * - Fatal Errors - link_reset | 
|  | * - Non-Fatal Errors - driver's pci_error_detected() which | 
|  | * returns CAN_RECOVER, NEED_RESET or DISCONNECT. | 
|  | * | 
|  | * PCI AER driver calls | 
|  | * CAN_RECOVER - driver's pci_mmio_enabled(), mmio_enabled | 
|  | *               returns RECOVERED or NEED_RESET if fw_hung | 
|  | * NEED_RESET - driver's slot_reset() | 
|  | * DISCONNECT - device is dead & cannot recover | 
|  | * RECOVERED - driver's pci_resume() | 
|  | */ | 
|  | static pci_ers_result_t | 
|  | qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) | 
|  | { | 
|  | struct scsi_qla_host *ha = pci_get_drvdata(pdev); | 
|  |  | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n", | 
|  | ha->host_no, __func__, state); | 
|  |  | 
|  | if (!is_aer_supported(ha)) | 
|  | return PCI_ERS_RESULT_NONE; | 
|  |  | 
|  | switch (state) { | 
|  | case pci_channel_io_normal: | 
|  | clear_bit(AF_EEH_BUSY, &ha->flags); | 
|  | return PCI_ERS_RESULT_CAN_RECOVER; | 
|  | case pci_channel_io_frozen: | 
|  | set_bit(AF_EEH_BUSY, &ha->flags); | 
|  | qla4xxx_mailbox_premature_completion(ha); | 
|  | qla4xxx_free_irqs(ha); | 
|  | pci_disable_device(pdev); | 
|  | /* Return back all IOs */ | 
|  | qla4xxx_abort_active_cmds(ha, DID_RESET << 16); | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | case pci_channel_io_perm_failure: | 
|  | set_bit(AF_EEH_BUSY, &ha->flags); | 
|  | set_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags); | 
|  | qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | } | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qla4xxx_pci_mmio_enabled() gets called if | 
|  | * qla4xxx_pci_error_detected() returns PCI_ERS_RESULT_CAN_RECOVER | 
|  | * and read/write to the device still works. | 
|  | **/ | 
|  | static pci_ers_result_t | 
|  | qla4xxx_pci_mmio_enabled(struct pci_dev *pdev) | 
|  | { | 
|  | struct scsi_qla_host *ha = pci_get_drvdata(pdev); | 
|  |  | 
|  | if (!is_aer_supported(ha)) | 
|  | return PCI_ERS_RESULT_NONE; | 
|  |  | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) | 
|  | { | 
|  | uint32_t rval = QLA_ERROR; | 
|  | uint32_t ret = 0; | 
|  | int fn; | 
|  | struct pci_dev *other_pdev = NULL; | 
|  |  | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__); | 
|  |  | 
|  | set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); | 
|  |  | 
|  | if (test_bit(AF_ONLINE, &ha->flags)) { | 
|  | clear_bit(AF_ONLINE, &ha->flags); | 
|  | clear_bit(AF_LINK_UP, &ha->flags); | 
|  | iscsi_host_for_each_session(ha->host, qla4xxx_fail_session); | 
|  | qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); | 
|  | } | 
|  |  | 
|  | fn = PCI_FUNC(ha->pdev->devfn); | 
|  | while (fn > 0) { | 
|  | fn--; | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at " | 
|  | "func %x\n", ha->host_no, __func__, fn); | 
|  | /* Get the pci device given the domain, bus, | 
|  | * slot/function number */ | 
|  | other_pdev = | 
|  | pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus), | 
|  | ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn), | 
|  | fn)); | 
|  |  | 
|  | if (!other_pdev) | 
|  | continue; | 
|  |  | 
|  | if (atomic_read(&other_pdev->enable_cnt)) { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI " | 
|  | "func in enabled state%x\n", ha->host_no, | 
|  | __func__, fn); | 
|  | pci_dev_put(other_pdev); | 
|  | break; | 
|  | } | 
|  | pci_dev_put(other_pdev); | 
|  | } | 
|  |  | 
|  | /* The first function on the card, the reset owner will | 
|  | * start & initialize the firmware. The other functions | 
|  | * on the card will reset the firmware context | 
|  | */ | 
|  | if (!fn) { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset " | 
|  | "0x%x is the owner\n", ha->host_no, __func__, | 
|  | ha->pdev->devfn); | 
|  |  | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, | 
|  | QLA82XX_DEV_COLD); | 
|  |  | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, | 
|  | QLA82XX_IDC_VERSION); | 
|  |  | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | clear_bit(AF_FW_RECOVERY, &ha->flags); | 
|  | rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); | 
|  | qla4_8xxx_idc_lock(ha); | 
|  |  | 
|  | if (rval != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: " | 
|  | "FAILED\n", ha->host_no, __func__); | 
|  | qla4_8xxx_clear_drv_active(ha); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, | 
|  | QLA82XX_DEV_FAILED); | 
|  | } else { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: " | 
|  | "READY\n", ha->host_no, __func__); | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, | 
|  | QLA82XX_DEV_READY); | 
|  | /* Clear driver state register */ | 
|  | qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0); | 
|  | qla4_8xxx_set_drv_active(ha); | 
|  | ret = qla4xxx_request_irqs(ha); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_WARNING, ha, "Failed to " | 
|  | "reserve interrupt %d already in use.\n", | 
|  | ha->pdev->irq); | 
|  | rval = QLA_ERROR; | 
|  | } else { | 
|  | ha->isp_ops->enable_intrs(ha); | 
|  | rval = QLA_SUCCESS; | 
|  | } | 
|  | } | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | } else { | 
|  | ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not " | 
|  | "the reset owner\n", ha->host_no, __func__, | 
|  | ha->pdev->devfn); | 
|  | if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) == | 
|  | QLA82XX_DEV_READY)) { | 
|  | clear_bit(AF_FW_RECOVERY, &ha->flags); | 
|  | rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); | 
|  | if (rval == QLA_SUCCESS) { | 
|  | ret = qla4xxx_request_irqs(ha); | 
|  | if (ret) { | 
|  | ql4_printk(KERN_WARNING, ha, "Failed to" | 
|  | " reserve interrupt %d already in" | 
|  | " use.\n", ha->pdev->irq); | 
|  | rval = QLA_ERROR; | 
|  | } else { | 
|  | ha->isp_ops->enable_intrs(ha); | 
|  | rval = QLA_SUCCESS; | 
|  | } | 
|  | } | 
|  | qla4_8xxx_idc_lock(ha); | 
|  | qla4_8xxx_set_drv_active(ha); | 
|  | qla4_8xxx_idc_unlock(ha); | 
|  | } | 
|  | } | 
|  | clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | static pci_ers_result_t | 
|  | qla4xxx_pci_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; | 
|  | struct scsi_qla_host *ha = pci_get_drvdata(pdev); | 
|  | int rc; | 
|  |  | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n", | 
|  | ha->host_no, __func__); | 
|  |  | 
|  | if (!is_aer_supported(ha)) | 
|  | return PCI_ERS_RESULT_NONE; | 
|  |  | 
|  | /* Restore the saved state of PCIe device - | 
|  | * BAR registers, PCI Config space, PCIX, MSI, | 
|  | * IOV states | 
|  | */ | 
|  | pci_restore_state(pdev); | 
|  |  | 
|  | /* pci_restore_state() clears the saved_state flag of the device | 
|  | * save restored state which resets saved_state flag | 
|  | */ | 
|  | pci_save_state(pdev); | 
|  |  | 
|  | /* Initialize device or resume if in suspended state */ | 
|  | rc = pci_enable_device(pdev); | 
|  | if (rc) { | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable " | 
|  | "device after reset\n", ha->host_no, __func__); | 
|  | goto exit_slot_reset; | 
|  | } | 
|  |  | 
|  | ha->isp_ops->disable_intrs(ha); | 
|  |  | 
|  | if (is_qla8022(ha)) { | 
|  | if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) { | 
|  | ret = PCI_ERS_RESULT_RECOVERED; | 
|  | goto exit_slot_reset; | 
|  | } else | 
|  | goto exit_slot_reset; | 
|  | } | 
|  |  | 
|  | exit_slot_reset: | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n" | 
|  | "device after reset\n", ha->host_no, __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void | 
|  | qla4xxx_pci_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct scsi_qla_host *ha = pci_get_drvdata(pdev); | 
|  | int ret; | 
|  |  | 
|  | ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n", | 
|  | ha->host_no, __func__); | 
|  |  | 
|  | ret = qla4xxx_wait_for_hba_online(ha); | 
|  | if (ret != QLA_SUCCESS) { | 
|  | ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to " | 
|  | "resume I/O from slot/link_reset\n", ha->host_no, | 
|  | __func__); | 
|  | } | 
|  |  | 
|  | pci_cleanup_aer_uncorrect_error_status(pdev); | 
|  | clear_bit(AF_EEH_BUSY, &ha->flags); | 
|  | } | 
|  |  | 
|  | static struct pci_error_handlers qla4xxx_err_handler = { | 
|  | .error_detected = qla4xxx_pci_error_detected, | 
|  | .mmio_enabled = qla4xxx_pci_mmio_enabled, | 
|  | .slot_reset = qla4xxx_pci_slot_reset, | 
|  | .resume = qla4xxx_pci_resume, | 
|  | }; | 
|  |  | 
|  | static struct pci_device_id qla4xxx_pci_tbl[] = { | 
|  | { | 
|  | .vendor		= PCI_VENDOR_ID_QLOGIC, | 
|  | .device		= PCI_DEVICE_ID_QLOGIC_ISP4010, | 
|  | .subvendor	= PCI_ANY_ID, | 
|  | .subdevice	= PCI_ANY_ID, | 
|  | }, | 
|  | { | 
|  | .vendor		= PCI_VENDOR_ID_QLOGIC, | 
|  | .device		= PCI_DEVICE_ID_QLOGIC_ISP4022, | 
|  | .subvendor	= PCI_ANY_ID, | 
|  | .subdevice	= PCI_ANY_ID, | 
|  | }, | 
|  | { | 
|  | .vendor		= PCI_VENDOR_ID_QLOGIC, | 
|  | .device		= PCI_DEVICE_ID_QLOGIC_ISP4032, | 
|  | .subvendor	= PCI_ANY_ID, | 
|  | .subdevice	= PCI_ANY_ID, | 
|  | }, | 
|  | { | 
|  | .vendor         = PCI_VENDOR_ID_QLOGIC, | 
|  | .device         = PCI_DEVICE_ID_QLOGIC_ISP8022, | 
|  | .subvendor      = PCI_ANY_ID, | 
|  | .subdevice      = PCI_ANY_ID, | 
|  | }, | 
|  | {0, 0}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl); | 
|  |  | 
|  | static struct pci_driver qla4xxx_pci_driver = { | 
|  | .name		= DRIVER_NAME, | 
|  | .id_table	= qla4xxx_pci_tbl, | 
|  | .probe		= qla4xxx_probe_adapter, | 
|  | .remove		= qla4xxx_remove_adapter, | 
|  | .err_handler = &qla4xxx_err_handler, | 
|  | }; | 
|  |  | 
|  | static int __init qla4xxx_module_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* Allocate cache for SRBs. */ | 
|  | srb_cachep = kmem_cache_create("qla4xxx_srbs", sizeof(struct srb), 0, | 
|  | SLAB_HWCACHE_ALIGN, NULL); | 
|  | if (srb_cachep == NULL) { | 
|  | printk(KERN_ERR | 
|  | "%s: Unable to allocate SRB cache..." | 
|  | "Failing load!\n", DRIVER_NAME); | 
|  | ret = -ENOMEM; | 
|  | goto no_srp_cache; | 
|  | } | 
|  |  | 
|  | /* Derive version string. */ | 
|  | strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION); | 
|  | if (ql4xextended_error_logging) | 
|  | strcat(qla4xxx_version_str, "-debug"); | 
|  |  | 
|  | qla4xxx_scsi_transport = | 
|  | iscsi_register_transport(&qla4xxx_iscsi_transport); | 
|  | if (!qla4xxx_scsi_transport){ | 
|  | ret = -ENODEV; | 
|  | goto release_srb_cache; | 
|  | } | 
|  |  | 
|  | ret = pci_register_driver(&qla4xxx_pci_driver); | 
|  | if (ret) | 
|  | goto unregister_transport; | 
|  |  | 
|  | printk(KERN_INFO "QLogic iSCSI HBA Driver\n"); | 
|  | return 0; | 
|  |  | 
|  | unregister_transport: | 
|  | iscsi_unregister_transport(&qla4xxx_iscsi_transport); | 
|  | release_srb_cache: | 
|  | kmem_cache_destroy(srb_cachep); | 
|  | no_srp_cache: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit qla4xxx_module_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&qla4xxx_pci_driver); | 
|  | iscsi_unregister_transport(&qla4xxx_iscsi_transport); | 
|  | kmem_cache_destroy(srb_cachep); | 
|  | } | 
|  |  | 
|  | module_init(qla4xxx_module_init); | 
|  | module_exit(qla4xxx_module_exit); | 
|  |  | 
|  | MODULE_AUTHOR("QLogic Corporation"); | 
|  | MODULE_DESCRIPTION("QLogic iSCSI HBA Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(QLA4XXX_DRIVER_VERSION); |