|  | /* | 
|  | * dbgp.c -- EHCI Debug Port device gadget | 
|  | * | 
|  | * Copyright (C) 2010 Stephane Duverger | 
|  | * | 
|  | * Released under the GPLv2. | 
|  | */ | 
|  |  | 
|  | /* verbose messages */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/usb/ch9.h> | 
|  | #include <linux/usb/gadget.h> | 
|  |  | 
|  | /* See comments in "zero.c" */ | 
|  | #include "epautoconf.c" | 
|  |  | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | #include "u_serial.c" | 
|  | #endif | 
|  |  | 
|  | #define DRIVER_VENDOR_ID	0x0525 /* NetChip */ | 
|  | #define DRIVER_PRODUCT_ID	0xc0de /* undefined */ | 
|  |  | 
|  | #define USB_DEBUG_MAX_PACKET_SIZE     8 | 
|  | #define DBGP_REQ_EP0_LEN              128 | 
|  | #define DBGP_REQ_LEN                  512 | 
|  |  | 
|  | static struct dbgp { | 
|  | struct usb_gadget  *gadget; | 
|  | struct usb_request *req; | 
|  | struct usb_ep      *i_ep; | 
|  | struct usb_ep      *o_ep; | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | struct gserial     *serial; | 
|  | #endif | 
|  | } dbgp; | 
|  |  | 
|  | static struct usb_device_descriptor device_desc = { | 
|  | .bLength = sizeof device_desc, | 
|  | .bDescriptorType = USB_DT_DEVICE, | 
|  | .bcdUSB = __constant_cpu_to_le16(0x0200), | 
|  | .bDeviceClass =	USB_CLASS_VENDOR_SPEC, | 
|  | .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID), | 
|  | .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID), | 
|  | .bNumConfigurations = 1, | 
|  | }; | 
|  |  | 
|  | static struct usb_debug_descriptor dbg_desc = { | 
|  | .bLength = sizeof dbg_desc, | 
|  | .bDescriptorType = USB_DT_DEBUG, | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor i_desc = { | 
|  | .bLength = USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType = USB_DT_ENDPOINT, | 
|  | .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
|  | .bEndpointAddress = USB_DIR_IN, | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor o_desc = { | 
|  | .bLength = USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType = USB_DT_ENDPOINT, | 
|  | .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
|  | .bEndpointAddress = USB_DIR_OUT, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_USB_G_DBGP_PRINTK | 
|  | static int dbgp_consume(char *buf, unsigned len) | 
|  | { | 
|  | char c; | 
|  |  | 
|  | if (!len) | 
|  | return 0; | 
|  |  | 
|  | c = buf[len-1]; | 
|  | if (c != 0) | 
|  | buf[len-1] = 0; | 
|  |  | 
|  | printk(KERN_NOTICE "%s%c", buf, c); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __disable_ep(struct usb_ep *ep) | 
|  | { | 
|  | if (ep && ep->driver_data == dbgp.gadget) { | 
|  | usb_ep_disable(ep); | 
|  | ep->driver_data = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dbgp_disable_ep(void) | 
|  | { | 
|  | __disable_ep(dbgp.i_ep); | 
|  | __disable_ep(dbgp.o_ep); | 
|  | } | 
|  |  | 
|  | static void dbgp_complete(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | int stp; | 
|  | int err = 0; | 
|  | int status = req->status; | 
|  |  | 
|  | if (ep == dbgp.i_ep) { | 
|  | stp = 1; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | if (status != 0) { | 
|  | stp = 2; | 
|  | goto release_req; | 
|  | } | 
|  |  | 
|  | dbgp_consume(req->buf, req->actual); | 
|  |  | 
|  | req->length = DBGP_REQ_LEN; | 
|  | err = usb_ep_queue(ep, req, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | stp = 3; | 
|  | goto release_req; | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | release_req: | 
|  | kfree(req->buf); | 
|  | usb_ep_free_request(dbgp.o_ep, req); | 
|  | dbgp_disable_ep(); | 
|  | fail: | 
|  | dev_dbg(&dbgp.gadget->dev, | 
|  | "complete: failure (%d:%d) ==> %d\n", stp, err, status); | 
|  | } | 
|  |  | 
|  | static int dbgp_enable_ep_req(struct usb_ep *ep) | 
|  | { | 
|  | int err, stp; | 
|  | struct usb_request *req; | 
|  |  | 
|  | req = usb_ep_alloc_request(ep, GFP_KERNEL); | 
|  | if (!req) { | 
|  | err = -ENOMEM; | 
|  | stp = 1; | 
|  | goto fail_1; | 
|  | } | 
|  |  | 
|  | req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL); | 
|  | if (!req->buf) { | 
|  | err = -ENOMEM; | 
|  | stp = 2; | 
|  | goto fail_2; | 
|  | } | 
|  |  | 
|  | req->complete = dbgp_complete; | 
|  | req->length = DBGP_REQ_LEN; | 
|  | err = usb_ep_queue(ep, req, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | stp = 3; | 
|  | goto fail_3; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_3: | 
|  | kfree(req->buf); | 
|  | fail_2: | 
|  | usb_ep_free_request(dbgp.o_ep, req); | 
|  | fail_1: | 
|  | dev_dbg(&dbgp.gadget->dev, | 
|  | "enable ep req: failure (%d:%d)\n", stp, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc) | 
|  | { | 
|  | int err; | 
|  | ep->desc = desc; | 
|  | err = usb_ep_enable(ep); | 
|  | ep->driver_data = dbgp.gadget; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int dbgp_enable_ep(void) | 
|  | { | 
|  | int err, stp; | 
|  |  | 
|  | err = __enable_ep(dbgp.i_ep, &i_desc); | 
|  | if (err < 0) { | 
|  | stp = 1; | 
|  | goto fail_1; | 
|  | } | 
|  |  | 
|  | err = __enable_ep(dbgp.o_ep, &o_desc); | 
|  | if (err < 0) { | 
|  | stp = 2; | 
|  | goto fail_2; | 
|  | } | 
|  |  | 
|  | err = dbgp_enable_ep_req(dbgp.o_ep); | 
|  | if (err < 0) { | 
|  | stp = 3; | 
|  | goto fail_3; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_3: | 
|  | __disable_ep(dbgp.o_ep); | 
|  | fail_2: | 
|  | __disable_ep(dbgp.i_ep); | 
|  | fail_1: | 
|  | dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err); | 
|  | return err; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void dbgp_disconnect(struct usb_gadget *gadget) | 
|  | { | 
|  | #ifdef CONFIG_USB_G_DBGP_PRINTK | 
|  | dbgp_disable_ep(); | 
|  | #else | 
|  | gserial_disconnect(dbgp.serial); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void dbgp_unbind(struct usb_gadget *gadget) | 
|  | { | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | kfree(dbgp.serial); | 
|  | #endif | 
|  | if (dbgp.req) { | 
|  | kfree(dbgp.req->buf); | 
|  | usb_ep_free_request(gadget->ep0, dbgp.req); | 
|  | } | 
|  |  | 
|  | gadget->ep0->driver_data = NULL; | 
|  | } | 
|  |  | 
|  | static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) | 
|  | { | 
|  | int stp; | 
|  |  | 
|  | usb_ep_autoconfig_reset(gadget); | 
|  |  | 
|  | dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc); | 
|  | if (!dbgp.i_ep) { | 
|  | stp = 1; | 
|  | goto fail_1; | 
|  | } | 
|  |  | 
|  | dbgp.i_ep->driver_data = gadget; | 
|  | i_desc.wMaxPacketSize = | 
|  | __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); | 
|  |  | 
|  | dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc); | 
|  | if (!dbgp.o_ep) { | 
|  | dbgp.i_ep->driver_data = NULL; | 
|  | stp = 2; | 
|  | goto fail_2; | 
|  | } | 
|  |  | 
|  | dbgp.o_ep->driver_data = gadget; | 
|  | o_desc.wMaxPacketSize = | 
|  | __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); | 
|  |  | 
|  | dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress; | 
|  | dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress; | 
|  |  | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | dbgp.serial->in = dbgp.i_ep; | 
|  | dbgp.serial->out = dbgp.o_ep; | 
|  |  | 
|  | dbgp.serial->in->desc = &i_desc; | 
|  | dbgp.serial->out->desc = &o_desc; | 
|  |  | 
|  | if (gserial_setup(gadget, 1) < 0) { | 
|  | stp = 3; | 
|  | goto fail_3; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_3: | 
|  | dbgp.o_ep->driver_data = NULL; | 
|  | #else | 
|  | return 0; | 
|  | #endif | 
|  | fail_2: | 
|  | dbgp.i_ep->driver_data = NULL; | 
|  | fail_1: | 
|  | dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int __init dbgp_bind(struct usb_gadget *gadget) | 
|  | { | 
|  | int err, stp; | 
|  |  | 
|  | dbgp.gadget = gadget; | 
|  |  | 
|  | dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); | 
|  | if (!dbgp.req) { | 
|  | err = -ENOMEM; | 
|  | stp = 1; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL); | 
|  | if (!dbgp.req->buf) { | 
|  | err = -ENOMEM; | 
|  | stp = 2; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | dbgp.req->length = DBGP_REQ_EP0_LEN; | 
|  | gadget->ep0->driver_data = gadget; | 
|  |  | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL); | 
|  | if (!dbgp.serial) { | 
|  | stp = 3; | 
|  | err = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  | #endif | 
|  | err = dbgp_configure_endpoints(gadget); | 
|  | if (err < 0) { | 
|  | stp = 4; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | dev_dbg(&dbgp.gadget->dev, "bind: success\n"); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err); | 
|  | dbgp_unbind(gadget); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void dbgp_setup_complete(struct usb_ep *ep, | 
|  | struct usb_request *req) | 
|  | { | 
|  | dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n", | 
|  | req->status, req->actual, req->length); | 
|  | } | 
|  |  | 
|  | static int dbgp_setup(struct usb_gadget *gadget, | 
|  | const struct usb_ctrlrequest *ctrl) | 
|  | { | 
|  | struct usb_request *req = dbgp.req; | 
|  | u8 request = ctrl->bRequest; | 
|  | u16 value = le16_to_cpu(ctrl->wValue); | 
|  | u16 length = le16_to_cpu(ctrl->wLength); | 
|  | int err = -EOPNOTSUPP; | 
|  | void *data = NULL; | 
|  | u16 len = 0; | 
|  |  | 
|  | gadget->ep0->driver_data = gadget; | 
|  |  | 
|  | if (request == USB_REQ_GET_DESCRIPTOR) { | 
|  | switch (value>>8) { | 
|  | case USB_DT_DEVICE: | 
|  | dev_dbg(&dbgp.gadget->dev, "setup: desc device\n"); | 
|  | len = sizeof device_desc; | 
|  | data = &device_desc; | 
|  | device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; | 
|  | break; | 
|  | case USB_DT_DEBUG: | 
|  | dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n"); | 
|  | len = sizeof dbg_desc; | 
|  | data = &dbg_desc; | 
|  | break; | 
|  | default: | 
|  | goto fail; | 
|  | } | 
|  | err = 0; | 
|  | } else if (request == USB_REQ_SET_FEATURE && | 
|  | value == USB_DEVICE_DEBUG_MODE) { | 
|  | dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n"); | 
|  | #ifdef CONFIG_USB_G_DBGP_PRINTK | 
|  | err = dbgp_enable_ep(); | 
|  | #else | 
|  | err = gserial_connect(dbgp.serial, 0); | 
|  | #endif | 
|  | if (err < 0) | 
|  | goto fail; | 
|  | } else | 
|  | goto fail; | 
|  |  | 
|  | req->length = min(length, len); | 
|  | req->zero = len < req->length; | 
|  | if (data && req->length) | 
|  | memcpy(req->buf, data, req->length); | 
|  |  | 
|  | req->complete = dbgp_setup_complete; | 
|  | return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); | 
|  |  | 
|  | fail: | 
|  | dev_dbg(&dbgp.gadget->dev, | 
|  | "setup: failure req %x v %x\n", request, value); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct usb_gadget_driver dbgp_driver = { | 
|  | .function = "dbgp", | 
|  | .max_speed = USB_SPEED_HIGH, | 
|  | .unbind = dbgp_unbind, | 
|  | .setup = dbgp_setup, | 
|  | .disconnect = dbgp_disconnect, | 
|  | .driver	= { | 
|  | .owner = THIS_MODULE, | 
|  | .name = "dbgp" | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init dbgp_init(void) | 
|  | { | 
|  | return usb_gadget_probe_driver(&dbgp_driver, dbgp_bind); | 
|  | } | 
|  |  | 
|  | static void __exit dbgp_exit(void) | 
|  | { | 
|  | usb_gadget_unregister_driver(&dbgp_driver); | 
|  | #ifdef CONFIG_USB_G_DBGP_SERIAL | 
|  | gserial_cleanup(); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Stephane Duverger"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | module_init(dbgp_init); | 
|  | module_exit(dbgp_exit); |