|  | /* | 
|  | * linux/drivers/usb/gadget/s3c2410_udc.h | 
|  | * Samsung on-chip full speed USB device controllers | 
|  | * | 
|  | * Copyright (C) 2004-2007 Herbert Pƶtzl - Arnaud Patard | 
|  | *	Additional cleanups by Ben Dooks <ben-linux@fluff.org> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #ifndef _S3C2410_UDC_H | 
|  | #define _S3C2410_UDC_H | 
|  |  | 
|  | struct s3c2410_ep { | 
|  | struct list_head		queue; | 
|  | unsigned long			last_io;	/* jiffies timestamp */ | 
|  | struct usb_gadget		*gadget; | 
|  | struct s3c2410_udc		*dev; | 
|  | struct usb_ep			ep; | 
|  | u8				num; | 
|  |  | 
|  | unsigned short			fifo_size; | 
|  | u8				bEndpointAddress; | 
|  | u8				bmAttributes; | 
|  |  | 
|  | unsigned			halted : 1; | 
|  | unsigned			already_seen : 1; | 
|  | unsigned			setup_stage : 1; | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* Warning : ep0 has a fifo of 16 bytes */ | 
|  | /* Don't try to set 32 or 64            */ | 
|  | /* also testusb 14 fails  wit 16 but is */ | 
|  | /* fine with 8                          */ | 
|  | #define EP0_FIFO_SIZE		 8 | 
|  | #define EP_FIFO_SIZE		64 | 
|  | #define DEFAULT_POWER_STATE	0x00 | 
|  |  | 
|  | #define S3C2440_EP_FIFO_SIZE	128 | 
|  |  | 
|  | static const char ep0name [] = "ep0"; | 
|  |  | 
|  | static const char *const ep_name[] = { | 
|  | ep0name,                                /* everyone has ep0 */ | 
|  | /* s3c2410 four bidirectional bulk endpoints */ | 
|  | "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk", | 
|  | }; | 
|  |  | 
|  | #define S3C2410_ENDPOINTS       ARRAY_SIZE(ep_name) | 
|  |  | 
|  | struct s3c2410_request { | 
|  | struct list_head		queue;		/* ep's requests */ | 
|  | struct usb_request		req; | 
|  | }; | 
|  |  | 
|  | enum ep0_state { | 
|  | EP0_IDLE, | 
|  | EP0_IN_DATA_PHASE, | 
|  | EP0_OUT_DATA_PHASE, | 
|  | EP0_END_XFER, | 
|  | EP0_STALL, | 
|  | }; | 
|  |  | 
|  | static const char *ep0states[]= { | 
|  | "EP0_IDLE", | 
|  | "EP0_IN_DATA_PHASE", | 
|  | "EP0_OUT_DATA_PHASE", | 
|  | "EP0_END_XFER", | 
|  | "EP0_STALL", | 
|  | }; | 
|  |  | 
|  | struct s3c2410_udc { | 
|  | spinlock_t			lock; | 
|  |  | 
|  | struct s3c2410_ep		ep[S3C2410_ENDPOINTS]; | 
|  | int				address; | 
|  | struct usb_gadget		gadget; | 
|  | struct usb_gadget_driver	*driver; | 
|  | struct s3c2410_request		fifo_req; | 
|  | u8				fifo_buf[EP_FIFO_SIZE]; | 
|  | u16				devstatus; | 
|  |  | 
|  | u32				port_status; | 
|  | int				ep0state; | 
|  |  | 
|  | unsigned			got_irq : 1; | 
|  |  | 
|  | unsigned			req_std : 1; | 
|  | unsigned			req_config : 1; | 
|  | unsigned			req_pending : 1; | 
|  | u8				vbus; | 
|  | struct dentry			*regs_info; | 
|  | }; | 
|  |  | 
|  | #endif |