|  | /* | 
|  | * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface | 
|  | * | 
|  | * Copyright (C) 2006 Nokia Corporation | 
|  | * Tony Lindgren <tony@atomide.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/slab.h> | 
|  | #include <plat/dma.h> | 
|  | #include <plat/mux.h> | 
|  |  | 
|  | #include "musb_core.h" | 
|  | #include "tusb6010.h" | 
|  |  | 
|  | #define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data) | 
|  |  | 
|  | #define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */ | 
|  |  | 
|  | struct tusb_omap_dma_ch { | 
|  | struct musb		*musb; | 
|  | void __iomem		*tbase; | 
|  | unsigned long		phys_offset; | 
|  | int			epnum; | 
|  | u8			tx; | 
|  | struct musb_hw_ep	*hw_ep; | 
|  |  | 
|  | int			ch; | 
|  | s8			dmareq; | 
|  | s8			sync_dev; | 
|  |  | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  |  | 
|  | dma_addr_t		dma_addr; | 
|  |  | 
|  | u32			len; | 
|  | u16			packet_sz; | 
|  | u16			transfer_packet_sz; | 
|  | u32			transfer_len; | 
|  | u32			completed_len; | 
|  | }; | 
|  |  | 
|  | struct tusb_omap_dma { | 
|  | struct dma_controller		controller; | 
|  | struct musb			*musb; | 
|  | void __iomem			*tbase; | 
|  |  | 
|  | int				ch; | 
|  | s8				dmareq; | 
|  | s8				sync_dev; | 
|  | unsigned			multichannel:1; | 
|  | }; | 
|  |  | 
|  | static int tusb_omap_dma_start(struct dma_controller *c) | 
|  | { | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  |  | 
|  | tusb_dma = container_of(c, struct tusb_omap_dma, controller); | 
|  |  | 
|  | /* dev_dbg(musb->controller, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tusb_omap_dma_stop(struct dma_controller *c) | 
|  | { | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  |  | 
|  | tusb_dma = container_of(c, struct tusb_omap_dma, controller); | 
|  |  | 
|  | /* dev_dbg(musb->controller, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate dmareq0 to the current channel unless it's already taken | 
|  | */ | 
|  | static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat) | 
|  | { | 
|  | u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); | 
|  |  | 
|  | if (reg != 0) { | 
|  | dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n", | 
|  | chdat->epnum, reg & 0xf); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (chdat->tx) | 
|  | reg = (1 << 4) | chdat->epnum; | 
|  | else | 
|  | reg = chdat->epnum; | 
|  |  | 
|  | musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat) | 
|  | { | 
|  | u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); | 
|  |  | 
|  | if ((reg & 0xf) != chdat->epnum) { | 
|  | printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n", | 
|  | chdat->epnum, reg & 0xf); | 
|  | return; | 
|  | } | 
|  | musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in | 
|  | * musb_gadget.c. | 
|  | */ | 
|  | static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data) | 
|  | { | 
|  | struct dma_channel	*channel = (struct dma_channel *)data; | 
|  | struct tusb_omap_dma_ch	*chdat = to_chdat(channel); | 
|  | struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma; | 
|  | struct musb		*musb = chdat->musb; | 
|  | struct device		*dev = musb->controller; | 
|  | struct musb_hw_ep	*hw_ep = chdat->hw_ep; | 
|  | void __iomem		*ep_conf = hw_ep->conf; | 
|  | void __iomem		*mbase = musb->mregs; | 
|  | unsigned long		remaining, flags, pio; | 
|  | int			ch; | 
|  |  | 
|  | spin_lock_irqsave(&musb->lock, flags); | 
|  |  | 
|  | if (tusb_dma->multichannel) | 
|  | ch = chdat->ch; | 
|  | else | 
|  | ch = tusb_dma->ch; | 
|  |  | 
|  | if (ch_status != OMAP_DMA_BLOCK_IRQ) | 
|  | printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status); | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i %s dma callback ch: %i status: %x\n", | 
|  | chdat->epnum, chdat->tx ? "tx" : "rx", | 
|  | ch, ch_status); | 
|  |  | 
|  | if (chdat->tx) | 
|  | remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET); | 
|  | else | 
|  | remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET); | 
|  |  | 
|  | remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining); | 
|  |  | 
|  | /* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */ | 
|  | if (unlikely(remaining > chdat->transfer_len)) { | 
|  | dev_dbg(musb->controller, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n", | 
|  | chdat->tx ? "tx" : "rx", chdat->ch, | 
|  | remaining); | 
|  | remaining = 0; | 
|  | } | 
|  |  | 
|  | channel->actual_len = chdat->transfer_len - remaining; | 
|  | pio = chdat->len - channel->actual_len; | 
|  |  | 
|  | dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len); | 
|  |  | 
|  | /* Transfer remaining 1 - 31 bytes */ | 
|  | if (pio > 0 && pio < 32) { | 
|  | u8	*buf; | 
|  |  | 
|  | dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio); | 
|  | buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len; | 
|  | if (chdat->tx) { | 
|  | dma_unmap_single(dev, chdat->dma_addr, | 
|  | chdat->transfer_len, | 
|  | DMA_TO_DEVICE); | 
|  | musb_write_fifo(hw_ep, pio, buf); | 
|  | } else { | 
|  | dma_unmap_single(dev, chdat->dma_addr, | 
|  | chdat->transfer_len, | 
|  | DMA_FROM_DEVICE); | 
|  | musb_read_fifo(hw_ep, pio, buf); | 
|  | } | 
|  | channel->actual_len += pio; | 
|  | } | 
|  |  | 
|  | if (!tusb_dma->multichannel) | 
|  | tusb_omap_free_shared_dmareq(chdat); | 
|  |  | 
|  | channel->status = MUSB_DMA_STATUS_FREE; | 
|  |  | 
|  | /* Handle only RX callbacks here. TX callbacks must be handled based | 
|  | * on the TUSB DMA status interrupt. | 
|  | * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback | 
|  | * interrupt for RX and TX. | 
|  | */ | 
|  | if (!chdat->tx) | 
|  | musb_dma_completion(musb, chdat->epnum, chdat->tx); | 
|  |  | 
|  | /* We must terminate short tx transfers manually by setting TXPKTRDY. | 
|  | * REVISIT: This same problem may occur with other MUSB dma as well. | 
|  | * Easy to test with g_ether by pinging the MUSB board with ping -s54. | 
|  | */ | 
|  | if ((chdat->transfer_len < chdat->packet_sz) | 
|  | || (chdat->transfer_len % chdat->packet_sz != 0)) { | 
|  | u16	csr; | 
|  |  | 
|  | if (chdat->tx) { | 
|  | dev_dbg(musb->controller, "terminating short tx packet\n"); | 
|  | musb_ep_select(mbase, chdat->epnum); | 
|  | csr = musb_readw(hw_ep->regs, MUSB_TXCSR); | 
|  | csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY | 
|  | | MUSB_TXCSR_P_WZC_BITS; | 
|  | musb_writew(hw_ep->regs, MUSB_TXCSR, csr); | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&musb->lock, flags); | 
|  | } | 
|  |  | 
|  | static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, | 
|  | u8 rndis_mode, dma_addr_t dma_addr, u32 len) | 
|  | { | 
|  | struct tusb_omap_dma_ch		*chdat = to_chdat(channel); | 
|  | struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma; | 
|  | struct musb			*musb = chdat->musb; | 
|  | struct device			*dev = musb->controller; | 
|  | struct musb_hw_ep		*hw_ep = chdat->hw_ep; | 
|  | void __iomem			*mbase = musb->mregs; | 
|  | void __iomem			*ep_conf = hw_ep->conf; | 
|  | dma_addr_t			fifo = hw_ep->fifo_sync; | 
|  | struct omap_dma_channel_params	dma_params; | 
|  | u32				dma_remaining; | 
|  | int				src_burst, dst_burst; | 
|  | u16				csr; | 
|  | int				ch; | 
|  | s8				dmareq; | 
|  | s8				sync_dev; | 
|  |  | 
|  | if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz)) | 
|  | return false; | 
|  |  | 
|  | /* | 
|  | * HW issue #10: Async dma will eventually corrupt the XFR_SIZE | 
|  | * register which will cause missed DMA interrupt. We could try to | 
|  | * use a timer for the callback, but it is unsafe as the XFR_SIZE | 
|  | * register is corrupt, and we won't know if the DMA worked. | 
|  | */ | 
|  | if (dma_addr & 0x2) | 
|  | return false; | 
|  |  | 
|  | /* | 
|  | * Because of HW issue #10, it seems like mixing sync DMA and async | 
|  | * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before | 
|  | * using the channel for DMA. | 
|  | */ | 
|  | if (chdat->tx) | 
|  | dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET); | 
|  | else | 
|  | dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET); | 
|  |  | 
|  | dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining); | 
|  | if (dma_remaining) { | 
|  | dev_dbg(musb->controller, "Busy %s dma ch%i, not using: %08x\n", | 
|  | chdat->tx ? "tx" : "rx", chdat->ch, | 
|  | dma_remaining); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | chdat->transfer_len = len & ~0x1f; | 
|  |  | 
|  | if (len < packet_sz) | 
|  | chdat->transfer_packet_sz = chdat->transfer_len; | 
|  | else | 
|  | chdat->transfer_packet_sz = packet_sz; | 
|  |  | 
|  | if (tusb_dma->multichannel) { | 
|  | ch = chdat->ch; | 
|  | dmareq = chdat->dmareq; | 
|  | sync_dev = chdat->sync_dev; | 
|  | } else { | 
|  | if (tusb_omap_use_shared_dmareq(chdat) != 0) { | 
|  | dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum); | 
|  | return false; | 
|  | } | 
|  | if (tusb_dma->ch < 0) { | 
|  | /* REVISIT: This should get blocked earlier, happens | 
|  | * with MSC ErrorRecoveryTest | 
|  | */ | 
|  | WARN_ON(1); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ch = tusb_dma->ch; | 
|  | dmareq = tusb_dma->dmareq; | 
|  | sync_dev = tusb_dma->sync_dev; | 
|  | omap_set_dma_callback(ch, tusb_omap_dma_cb, channel); | 
|  | } | 
|  |  | 
|  | chdat->packet_sz = packet_sz; | 
|  | chdat->len = len; | 
|  | channel->actual_len = 0; | 
|  | chdat->dma_addr = dma_addr; | 
|  | channel->status = MUSB_DMA_STATUS_BUSY; | 
|  |  | 
|  | /* Since we're recycling dma areas, we need to clean or invalidate */ | 
|  | if (chdat->tx) | 
|  | dma_map_single(dev, phys_to_virt(dma_addr), len, | 
|  | DMA_TO_DEVICE); | 
|  | else | 
|  | dma_map_single(dev, phys_to_virt(dma_addr), len, | 
|  | DMA_FROM_DEVICE); | 
|  |  | 
|  | /* Use 16-bit transfer if dma_addr is not 32-bit aligned */ | 
|  | if ((dma_addr & 0x3) == 0) { | 
|  | dma_params.data_type = OMAP_DMA_DATA_TYPE_S32; | 
|  | dma_params.elem_count = 8;		/* Elements in frame */ | 
|  | } else { | 
|  | dma_params.data_type = OMAP_DMA_DATA_TYPE_S16; | 
|  | dma_params.elem_count = 16;		/* Elements in frame */ | 
|  | fifo = hw_ep->fifo_async; | 
|  | } | 
|  |  | 
|  | dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */ | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n", | 
|  | chdat->epnum, chdat->tx ? "tx" : "rx", | 
|  | ch, dma_addr, chdat->transfer_len, len, | 
|  | chdat->transfer_packet_sz, packet_sz); | 
|  |  | 
|  | /* | 
|  | * Prepare omap DMA for transfer | 
|  | */ | 
|  | if (chdat->tx) { | 
|  | dma_params.src_amode	= OMAP_DMA_AMODE_POST_INC; | 
|  | dma_params.src_start	= (unsigned long)dma_addr; | 
|  | dma_params.src_ei	= 0; | 
|  | dma_params.src_fi	= 0; | 
|  |  | 
|  | dma_params.dst_amode	= OMAP_DMA_AMODE_DOUBLE_IDX; | 
|  | dma_params.dst_start	= (unsigned long)fifo; | 
|  | dma_params.dst_ei	= 1; | 
|  | dma_params.dst_fi	= -31;	/* Loop 32 byte window */ | 
|  |  | 
|  | dma_params.trigger	= sync_dev; | 
|  | dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME; | 
|  | dma_params.src_or_dst_synch	= 0;	/* Dest sync */ | 
|  |  | 
|  | src_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 read */ | 
|  | dst_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 write */ | 
|  | } else { | 
|  | dma_params.src_amode	= OMAP_DMA_AMODE_DOUBLE_IDX; | 
|  | dma_params.src_start	= (unsigned long)fifo; | 
|  | dma_params.src_ei	= 1; | 
|  | dma_params.src_fi	= -31;	/* Loop 32 byte window */ | 
|  |  | 
|  | dma_params.dst_amode	= OMAP_DMA_AMODE_POST_INC; | 
|  | dma_params.dst_start	= (unsigned long)dma_addr; | 
|  | dma_params.dst_ei	= 0; | 
|  | dma_params.dst_fi	= 0; | 
|  |  | 
|  | dma_params.trigger	= sync_dev; | 
|  | dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME; | 
|  | dma_params.src_or_dst_synch	= 1;	/* Source sync */ | 
|  |  | 
|  | src_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 read */ | 
|  | dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */ | 
|  | } | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n", | 
|  | chdat->epnum, chdat->tx ? "tx" : "rx", | 
|  | (dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16, | 
|  | ((dma_addr & 0x3) == 0) ? "sync" : "async", | 
|  | dma_params.src_start, dma_params.dst_start); | 
|  |  | 
|  | omap_set_dma_params(ch, &dma_params); | 
|  | omap_set_dma_src_burst_mode(ch, src_burst); | 
|  | omap_set_dma_dest_burst_mode(ch, dst_burst); | 
|  | omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED); | 
|  |  | 
|  | /* | 
|  | * Prepare MUSB for DMA transfer | 
|  | */ | 
|  | if (chdat->tx) { | 
|  | musb_ep_select(mbase, chdat->epnum); | 
|  | csr = musb_readw(hw_ep->regs, MUSB_TXCSR); | 
|  | csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB | 
|  | | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); | 
|  | csr &= ~MUSB_TXCSR_P_UNDERRUN; | 
|  | musb_writew(hw_ep->regs, MUSB_TXCSR, csr); | 
|  | } else { | 
|  | musb_ep_select(mbase, chdat->epnum); | 
|  | csr = musb_readw(hw_ep->regs, MUSB_RXCSR); | 
|  | csr |= MUSB_RXCSR_DMAENAB; | 
|  | csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE); | 
|  | musb_writew(hw_ep->regs, MUSB_RXCSR, | 
|  | csr | MUSB_RXCSR_P_WZC_BITS); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start DMA transfer | 
|  | */ | 
|  | omap_start_dma(ch); | 
|  |  | 
|  | if (chdat->tx) { | 
|  | /* Send transfer_packet_sz packets at a time */ | 
|  | musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, | 
|  | chdat->transfer_packet_sz); | 
|  |  | 
|  | musb_writel(ep_conf, TUSB_EP_TX_OFFSET, | 
|  | TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); | 
|  | } else { | 
|  | /* Receive transfer_packet_sz packets at a time */ | 
|  | musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, | 
|  | chdat->transfer_packet_sz << 16); | 
|  |  | 
|  | musb_writel(ep_conf, TUSB_EP_RX_OFFSET, | 
|  | TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int tusb_omap_dma_abort(struct dma_channel *channel) | 
|  | { | 
|  | struct tusb_omap_dma_ch	*chdat = to_chdat(channel); | 
|  | struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma; | 
|  |  | 
|  | if (!tusb_dma->multichannel) { | 
|  | if (tusb_dma->ch >= 0) { | 
|  | omap_stop_dma(tusb_dma->ch); | 
|  | omap_free_dma(tusb_dma->ch); | 
|  | tusb_dma->ch = -1; | 
|  | } | 
|  |  | 
|  | tusb_dma->dmareq = -1; | 
|  | tusb_dma->sync_dev = -1; | 
|  | } | 
|  |  | 
|  | channel->status = MUSB_DMA_STATUS_FREE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat) | 
|  | { | 
|  | u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); | 
|  | int		i, dmareq_nr = -1; | 
|  |  | 
|  | const int sync_dev[6] = { | 
|  | OMAP24XX_DMA_EXT_DMAREQ0, | 
|  | OMAP24XX_DMA_EXT_DMAREQ1, | 
|  | OMAP242X_DMA_EXT_DMAREQ2, | 
|  | OMAP242X_DMA_EXT_DMAREQ3, | 
|  | OMAP242X_DMA_EXT_DMAREQ4, | 
|  | OMAP242X_DMA_EXT_DMAREQ5, | 
|  | }; | 
|  |  | 
|  | for (i = 0; i < MAX_DMAREQ; i++) { | 
|  | int cur = (reg & (0xf << (i * 5))) >> (i * 5); | 
|  | if (cur == 0) { | 
|  | dmareq_nr = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dmareq_nr == -1) | 
|  | return -EAGAIN; | 
|  |  | 
|  | reg |= (chdat->epnum << (dmareq_nr * 5)); | 
|  | if (chdat->tx) | 
|  | reg |= ((1 << 4) << (dmareq_nr * 5)); | 
|  | musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); | 
|  |  | 
|  | chdat->dmareq = dmareq_nr; | 
|  | chdat->sync_dev = sync_dev[chdat->dmareq]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | if (!chdat || chdat->dmareq < 0) | 
|  | return; | 
|  |  | 
|  | reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); | 
|  | reg &= ~(0x1f << (chdat->dmareq * 5)); | 
|  | musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); | 
|  |  | 
|  | chdat->dmareq = -1; | 
|  | chdat->sync_dev = -1; | 
|  | } | 
|  |  | 
|  | static struct dma_channel *dma_channel_pool[MAX_DMAREQ]; | 
|  |  | 
|  | static struct dma_channel * | 
|  | tusb_omap_dma_allocate(struct dma_controller *c, | 
|  | struct musb_hw_ep *hw_ep, | 
|  | u8 tx) | 
|  | { | 
|  | int ret, i; | 
|  | const char		*dev_name; | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  | struct musb		*musb; | 
|  | void __iomem		*tbase; | 
|  | struct dma_channel	*channel = NULL; | 
|  | struct tusb_omap_dma_ch	*chdat = NULL; | 
|  | u32			reg; | 
|  |  | 
|  | tusb_dma = container_of(c, struct tusb_omap_dma, controller); | 
|  | musb = tusb_dma->musb; | 
|  | tbase = musb->ctrl_base; | 
|  |  | 
|  | reg = musb_readl(tbase, TUSB_DMA_INT_MASK); | 
|  | if (tx) | 
|  | reg &= ~(1 << hw_ep->epnum); | 
|  | else | 
|  | reg &= ~(1 << (hw_ep->epnum + 15)); | 
|  | musb_writel(tbase, TUSB_DMA_INT_MASK, reg); | 
|  |  | 
|  | /* REVISIT: Why does dmareq5 not work? */ | 
|  | if (hw_ep->epnum == 0) { | 
|  | dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MAX_DMAREQ; i++) { | 
|  | struct dma_channel *ch = dma_channel_pool[i]; | 
|  | if (ch->status == MUSB_DMA_STATUS_UNKNOWN) { | 
|  | ch->status = MUSB_DMA_STATUS_FREE; | 
|  | channel = ch; | 
|  | chdat = ch->private_data; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!channel) | 
|  | return NULL; | 
|  |  | 
|  | if (tx) { | 
|  | chdat->tx = 1; | 
|  | dev_name = "TUSB transmit"; | 
|  | } else { | 
|  | chdat->tx = 0; | 
|  | dev_name = "TUSB receive"; | 
|  | } | 
|  |  | 
|  | chdat->musb = tusb_dma->musb; | 
|  | chdat->tbase = tusb_dma->tbase; | 
|  | chdat->hw_ep = hw_ep; | 
|  | chdat->epnum = hw_ep->epnum; | 
|  | chdat->dmareq = -1; | 
|  | chdat->completed_len = 0; | 
|  | chdat->tusb_dma = tusb_dma; | 
|  |  | 
|  | channel->max_len = 0x7fffffff; | 
|  | channel->desired_mode = 0; | 
|  | channel->actual_len = 0; | 
|  |  | 
|  | if (tusb_dma->multichannel) { | 
|  | ret = tusb_omap_dma_allocate_dmareq(chdat); | 
|  | if (ret != 0) | 
|  | goto free_dmareq; | 
|  |  | 
|  | ret = omap_request_dma(chdat->sync_dev, dev_name, | 
|  | tusb_omap_dma_cb, channel, &chdat->ch); | 
|  | if (ret != 0) | 
|  | goto free_dmareq; | 
|  | } else if (tusb_dma->ch == -1) { | 
|  | tusb_dma->dmareq = 0; | 
|  | tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0; | 
|  |  | 
|  | /* Callback data gets set later in the shared dmareq case */ | 
|  | ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared", | 
|  | tusb_omap_dma_cb, NULL, &tusb_dma->ch); | 
|  | if (ret != 0) | 
|  | goto free_dmareq; | 
|  |  | 
|  | chdat->dmareq = -1; | 
|  | chdat->ch = -1; | 
|  | } | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i %s dma: %s dma%i dmareq%i sync%i\n", | 
|  | chdat->epnum, | 
|  | chdat->tx ? "tx" : "rx", | 
|  | chdat->ch >= 0 ? "dedicated" : "shared", | 
|  | chdat->ch >= 0 ? chdat->ch : tusb_dma->ch, | 
|  | chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq, | 
|  | chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev); | 
|  |  | 
|  | return channel; | 
|  |  | 
|  | free_dmareq: | 
|  | tusb_omap_dma_free_dmareq(chdat); | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum); | 
|  | channel->status = MUSB_DMA_STATUS_UNKNOWN; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void tusb_omap_dma_release(struct dma_channel *channel) | 
|  | { | 
|  | struct tusb_omap_dma_ch	*chdat = to_chdat(channel); | 
|  | struct musb		*musb = chdat->musb; | 
|  | void __iomem		*tbase = musb->ctrl_base; | 
|  | u32			reg; | 
|  |  | 
|  | dev_dbg(musb->controller, "ep%i ch%i\n", chdat->epnum, chdat->ch); | 
|  |  | 
|  | reg = musb_readl(tbase, TUSB_DMA_INT_MASK); | 
|  | if (chdat->tx) | 
|  | reg |= (1 << chdat->epnum); | 
|  | else | 
|  | reg |= (1 << (chdat->epnum + 15)); | 
|  | musb_writel(tbase, TUSB_DMA_INT_MASK, reg); | 
|  |  | 
|  | reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR); | 
|  | if (chdat->tx) | 
|  | reg |= (1 << chdat->epnum); | 
|  | else | 
|  | reg |= (1 << (chdat->epnum + 15)); | 
|  | musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg); | 
|  |  | 
|  | channel->status = MUSB_DMA_STATUS_UNKNOWN; | 
|  |  | 
|  | if (chdat->ch >= 0) { | 
|  | omap_stop_dma(chdat->ch); | 
|  | omap_free_dma(chdat->ch); | 
|  | chdat->ch = -1; | 
|  | } | 
|  |  | 
|  | if (chdat->dmareq >= 0) | 
|  | tusb_omap_dma_free_dmareq(chdat); | 
|  |  | 
|  | channel = NULL; | 
|  | } | 
|  |  | 
|  | void dma_controller_destroy(struct dma_controller *c) | 
|  | { | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  | int			i; | 
|  |  | 
|  | tusb_dma = container_of(c, struct tusb_omap_dma, controller); | 
|  | for (i = 0; i < MAX_DMAREQ; i++) { | 
|  | struct dma_channel *ch = dma_channel_pool[i]; | 
|  | if (ch) { | 
|  | kfree(ch->private_data); | 
|  | kfree(ch); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0) | 
|  | omap_free_dma(tusb_dma->ch); | 
|  |  | 
|  | kfree(tusb_dma); | 
|  | } | 
|  |  | 
|  | struct dma_controller *__init | 
|  | dma_controller_create(struct musb *musb, void __iomem *base) | 
|  | { | 
|  | void __iomem		*tbase = musb->ctrl_base; | 
|  | struct tusb_omap_dma	*tusb_dma; | 
|  | int			i; | 
|  |  | 
|  | /* REVISIT: Get dmareq lines used from board-*.c */ | 
|  |  | 
|  | musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff); | 
|  | musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0); | 
|  |  | 
|  | musb_writel(tbase, TUSB_DMA_REQ_CONF, | 
|  | TUSB_DMA_REQ_CONF_BURST_SIZE(2) | 
|  | | TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) | 
|  | | TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2)); | 
|  |  | 
|  | tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL); | 
|  | if (!tusb_dma) | 
|  | goto out; | 
|  |  | 
|  | tusb_dma->musb = musb; | 
|  | tusb_dma->tbase = musb->ctrl_base; | 
|  |  | 
|  | tusb_dma->ch = -1; | 
|  | tusb_dma->dmareq = -1; | 
|  | tusb_dma->sync_dev = -1; | 
|  |  | 
|  | tusb_dma->controller.start = tusb_omap_dma_start; | 
|  | tusb_dma->controller.stop = tusb_omap_dma_stop; | 
|  | tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate; | 
|  | tusb_dma->controller.channel_release = tusb_omap_dma_release; | 
|  | tusb_dma->controller.channel_program = tusb_omap_dma_program; | 
|  | tusb_dma->controller.channel_abort = tusb_omap_dma_abort; | 
|  |  | 
|  | if (tusb_get_revision(musb) >= TUSB_REV_30) | 
|  | tusb_dma->multichannel = 1; | 
|  |  | 
|  | for (i = 0; i < MAX_DMAREQ; i++) { | 
|  | struct dma_channel	*ch; | 
|  | struct tusb_omap_dma_ch	*chdat; | 
|  |  | 
|  | ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL); | 
|  | if (!ch) | 
|  | goto cleanup; | 
|  |  | 
|  | dma_channel_pool[i] = ch; | 
|  |  | 
|  | chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL); | 
|  | if (!chdat) | 
|  | goto cleanup; | 
|  |  | 
|  | ch->status = MUSB_DMA_STATUS_UNKNOWN; | 
|  | ch->private_data = chdat; | 
|  | } | 
|  |  | 
|  | return &tusb_dma->controller; | 
|  |  | 
|  | cleanup: | 
|  | dma_controller_destroy(&tusb_dma->controller); | 
|  | out: | 
|  | return NULL; | 
|  | } |