|  | /* | 
|  | *  linux/sound/oss/dmasound/dmasound_atari.c | 
|  | * | 
|  | *  Atari TT and Falcon DMA Sound Driver | 
|  | * | 
|  | *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits | 
|  | *  prior to 28/01/2001 | 
|  | * | 
|  | *  28/01/2001 [0.1] Iain Sandoe | 
|  | *		     - added versioning | 
|  | *		     - put in and populated the hardware_afmts field. | 
|  | *             [0.2] - put in SNDCTL_DSP_GETCAPS value. | 
|  | *  01/02/2001 [0.3] - put in default hard/soft settings. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/soundcard.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/atariints.h> | 
|  | #include <asm/atari_stram.h> | 
|  |  | 
|  | #include "dmasound.h" | 
|  |  | 
|  | #define DMASOUND_ATARI_REVISION 0 | 
|  | #define DMASOUND_ATARI_EDITION 3 | 
|  |  | 
|  | extern void atari_microwire_cmd(int cmd); | 
|  |  | 
|  | static int is_falcon; | 
|  | static int write_sq_ignore_int;	/* ++TeSche: used for Falcon */ | 
|  |  | 
|  | static int expand_bal;	/* Balance factor for expanding (not volume!) */ | 
|  | static int expand_data;	/* Data for expanding */ | 
|  |  | 
|  |  | 
|  | /*** Translations ************************************************************/ | 
|  |  | 
|  |  | 
|  | /* ++TeSche: radically changed for new expanding purposes... | 
|  | * | 
|  | * These two routines now deal with copying/expanding/translating the samples | 
|  | * from user space into our buffer at the right frequency. They take care about | 
|  | * how much data there's actually to read, how much buffer space there is and | 
|  | * to convert samples into the right frequency/encoding. They will only work on | 
|  | * complete samples so it may happen they leave some bytes in the input stream | 
|  | * if the user didn't write a multiple of the current sample size. They both | 
|  | * return the number of bytes they've used from both streams so you may detect | 
|  | * such a situation. Luckily all programs should be able to cope with that. | 
|  | * | 
|  | * I think I've optimized anything as far as one can do in plain C, all | 
|  | * variables should fit in registers and the loops are really short. There's | 
|  | * one loop for every possible situation. Writing a more generalized and thus | 
|  | * parameterized loop would only produce slower code. Feel free to optimize | 
|  | * this in assembler if you like. :) | 
|  | * | 
|  | * I think these routines belong here because they're not yet really hardware | 
|  | * independent, especially the fact that the Falcon can play 16bit samples | 
|  | * only in stereo is hardcoded in both of them! | 
|  | * | 
|  | * ++geert: split in even more functions (one per format) | 
|  | */ | 
|  |  | 
|  | static ssize_t ata_ct_law(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_s8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_u8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_s16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_u16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_s16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ct_u16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_law(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_s8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_u8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_s16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_u16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_s16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  | static ssize_t ata_ctx_u16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft); | 
|  |  | 
|  |  | 
|  | /*** Low level stuff *********************************************************/ | 
|  |  | 
|  |  | 
|  | static void *AtaAlloc(unsigned int size, gfp_t flags); | 
|  | static void AtaFree(void *, unsigned int size); | 
|  | static int AtaIrqInit(void); | 
|  | #ifdef MODULE | 
|  | static void AtaIrqCleanUp(void); | 
|  | #endif /* MODULE */ | 
|  | static int AtaSetBass(int bass); | 
|  | static int AtaSetTreble(int treble); | 
|  | static void TTSilence(void); | 
|  | static void TTInit(void); | 
|  | static int TTSetFormat(int format); | 
|  | static int TTSetVolume(int volume); | 
|  | static int TTSetGain(int gain); | 
|  | static void FalconSilence(void); | 
|  | static void FalconInit(void); | 
|  | static int FalconSetFormat(int format); | 
|  | static int FalconSetVolume(int volume); | 
|  | static void AtaPlayNextFrame(int index); | 
|  | static void AtaPlay(void); | 
|  | static irqreturn_t AtaInterrupt(int irq, void *dummy); | 
|  |  | 
|  | /*** Mid level stuff *********************************************************/ | 
|  |  | 
|  | static void TTMixerInit(void); | 
|  | static void FalconMixerInit(void); | 
|  | static int AtaMixerIoctl(u_int cmd, u_long arg); | 
|  | static int TTMixerIoctl(u_int cmd, u_long arg); | 
|  | static int FalconMixerIoctl(u_int cmd, u_long arg); | 
|  | static int AtaWriteSqSetup(void); | 
|  | static int AtaSqOpen(fmode_t mode); | 
|  | static int TTStateInfo(char *buffer, size_t space); | 
|  | static int FalconStateInfo(char *buffer, size_t space); | 
|  |  | 
|  |  | 
|  | /*** Translations ************************************************************/ | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_law(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 | 
|  | : dmasound_alaw2dma8; | 
|  | ssize_t count, used; | 
|  | u_char *p = &frame[*frameUsed]; | 
|  |  | 
|  | count = min_t(unsigned long, userCount, frameLeft); | 
|  | if (dmasound.soft.stereo) | 
|  | count &= ~1; | 
|  | used = count; | 
|  | while (count > 0) { | 
|  | u_char data; | 
|  | if (get_user(data, userPtr++)) | 
|  | return -EFAULT; | 
|  | *p++ = table[data]; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_s8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  | void *p = &frame[*frameUsed]; | 
|  |  | 
|  | count = min_t(unsigned long, userCount, frameLeft); | 
|  | if (dmasound.soft.stereo) | 
|  | count &= ~1; | 
|  | used = count; | 
|  | if (copy_from_user(p, userPtr, count)) | 
|  | return -EFAULT; | 
|  | *frameUsed += used; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_u8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_char *p = &frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft); | 
|  | used = count; | 
|  | while (count > 0) { | 
|  | u_char data; | 
|  | if (get_user(data, userPtr++)) | 
|  | return -EFAULT; | 
|  | *p++ = data ^ 0x80; | 
|  | count--; | 
|  | } | 
|  | } else { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | u_short data; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | *p++ = data ^ 0x8080; | 
|  | count--; | 
|  | } | 
|  | } | 
|  | *frameUsed += used; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_s16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | u_short data; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used*2; | 
|  | } else { | 
|  | void *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft) & ~3; | 
|  | used = count; | 
|  | if (copy_from_user(p, userPtr, count)) | 
|  | return -EFAULT; | 
|  | *frameUsed += used; | 
|  | } | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_u16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | u_short data; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data ^= 0x8000; | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used*2; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>2; | 
|  | used = count*4; | 
|  | while (count > 0) { | 
|  | u_int data; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | *p++ = data ^ 0x80008000; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used; | 
|  | } | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_s16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | count = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | u_short data; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data = le2be16(data); | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used*2; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>2; | 
|  | used = count*4; | 
|  | while (count > 0) { | 
|  | u_long data; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | data = le2be16dbl(data); | 
|  | *p++ = data; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used; | 
|  | } | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ct_u16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | count = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | u_short data; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data = le2be16(data) ^ 0x8000; | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | } | 
|  | *frameUsed += used*2; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>2; | 
|  | used = count; | 
|  | while (count > 0) { | 
|  | u_long data; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | data = le2be16dbl(data) ^ 0x80008000; | 
|  | *p++ = data; | 
|  | count--; | 
|  | } | 
|  | *frameUsed += used; | 
|  | } | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_law(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 | 
|  | : dmasound_alaw2dma8; | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_char *p = &frame[*frameUsed]; | 
|  | u_char data = expand_data; | 
|  | while (frameLeft) { | 
|  | u_char c; | 
|  | if (bal < 0) { | 
|  | if (!userCount) | 
|  | break; | 
|  | if (get_user(c, userPtr++)) | 
|  | return -EFAULT; | 
|  | data = table[c]; | 
|  | userCount--; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft--; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 2) { | 
|  | u_char c; | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(c, userPtr++)) | 
|  | return -EFAULT; | 
|  | data = table[c] << 8; | 
|  | if (get_user(c, userPtr++)) | 
|  | return -EFAULT; | 
|  | data |= table[c]; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 2; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_s8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_char *p = &frame[*frameUsed]; | 
|  | u_char data = expand_data; | 
|  | while (frameLeft) { | 
|  | if (bal < 0) { | 
|  | if (!userCount) | 
|  | break; | 
|  | if (get_user(data, userPtr++)) | 
|  | return -EFAULT; | 
|  | userCount--; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft--; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 2) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 2; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_u8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_char *p = &frame[*frameUsed]; | 
|  | u_char data = expand_data; | 
|  | while (frameLeft) { | 
|  | if (bal < 0) { | 
|  | if (!userCount) | 
|  | break; | 
|  | if (get_user(data, userPtr++)) | 
|  | return -EFAULT; | 
|  | data ^= 0x80; | 
|  | userCount--; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft--; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 2) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data ^= 0x8080; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 2; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_s16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | u_long data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 4) | 
|  | break; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | userCount -= 4; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_u16be(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data ^= 0x8000; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | u_long data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 4) | 
|  | break; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | data ^= 0x80008000; | 
|  | userCount -= 4; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_s16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data = le2be16(data); | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | u_long data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 4) | 
|  | break; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | data = le2be16dbl(data); | 
|  | userCount -= 4; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t ata_ctx_u16le(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, | 
|  | ssize_t frameLeft) | 
|  | { | 
|  | /* this should help gcc to stuff everything into registers */ | 
|  | long bal = expand_bal; | 
|  | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; | 
|  | ssize_t used, usedf; | 
|  |  | 
|  | used = userCount; | 
|  | usedf = frameLeft; | 
|  | if (!dmasound.soft.stereo) { | 
|  | u_short *p = (u_short *)&frame[*frameUsed]; | 
|  | u_short data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 2) | 
|  | break; | 
|  | if (get_user(data, (u_short __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 2; | 
|  | data = le2be16(data) ^ 0x8000; | 
|  | userCount -= 2; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } else { | 
|  | u_long *p = (u_long *)&frame[*frameUsed]; | 
|  | u_long data = expand_data; | 
|  | while (frameLeft >= 4) { | 
|  | if (bal < 0) { | 
|  | if (userCount < 4) | 
|  | break; | 
|  | if (get_user(data, (u_int __user *)userPtr)) | 
|  | return -EFAULT; | 
|  | userPtr += 4; | 
|  | data = le2be16dbl(data) ^ 0x80008000; | 
|  | userCount -= 4; | 
|  | bal += hSpeed; | 
|  | } | 
|  | *p++ = data; | 
|  | frameLeft -= 4; | 
|  | bal -= sSpeed; | 
|  | } | 
|  | expand_data = data; | 
|  | } | 
|  | expand_bal = bal; | 
|  | used -= userCount; | 
|  | *frameUsed += usedf-frameLeft; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | static TRANS transTTNormal = { | 
|  | .ct_ulaw	= ata_ct_law, | 
|  | .ct_alaw	= ata_ct_law, | 
|  | .ct_s8		= ata_ct_s8, | 
|  | .ct_u8		= ata_ct_u8, | 
|  | }; | 
|  |  | 
|  | static TRANS transTTExpanding = { | 
|  | .ct_ulaw	= ata_ctx_law, | 
|  | .ct_alaw	= ata_ctx_law, | 
|  | .ct_s8		= ata_ctx_s8, | 
|  | .ct_u8		= ata_ctx_u8, | 
|  | }; | 
|  |  | 
|  | static TRANS transFalconNormal = { | 
|  | .ct_ulaw	= ata_ct_law, | 
|  | .ct_alaw	= ata_ct_law, | 
|  | .ct_s8		= ata_ct_s8, | 
|  | .ct_u8		= ata_ct_u8, | 
|  | .ct_s16be	= ata_ct_s16be, | 
|  | .ct_u16be	= ata_ct_u16be, | 
|  | .ct_s16le	= ata_ct_s16le, | 
|  | .ct_u16le	= ata_ct_u16le | 
|  | }; | 
|  |  | 
|  | static TRANS transFalconExpanding = { | 
|  | .ct_ulaw	= ata_ctx_law, | 
|  | .ct_alaw	= ata_ctx_law, | 
|  | .ct_s8		= ata_ctx_s8, | 
|  | .ct_u8		= ata_ctx_u8, | 
|  | .ct_s16be	= ata_ctx_s16be, | 
|  | .ct_u16be	= ata_ctx_u16be, | 
|  | .ct_s16le	= ata_ctx_s16le, | 
|  | .ct_u16le	= ata_ctx_u16le, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /*** Low level stuff *********************************************************/ | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Atari (TT/Falcon) | 
|  | */ | 
|  |  | 
|  | static void *AtaAlloc(unsigned int size, gfp_t flags) | 
|  | { | 
|  | return atari_stram_alloc(size, "dmasound"); | 
|  | } | 
|  |  | 
|  | static void AtaFree(void *obj, unsigned int size) | 
|  | { | 
|  | atari_stram_free( obj ); | 
|  | } | 
|  |  | 
|  | static int __init AtaIrqInit(void) | 
|  | { | 
|  | /* Set up timer A. Timer A | 
|  | will receive a signal upon end of playing from the sound | 
|  | hardware. Furthermore Timer A is able to count events | 
|  | and will cause an interrupt after a programmed number | 
|  | of events. So all we need to keep the music playing is | 
|  | to provide the sound hardware with new data upon | 
|  | an interrupt from timer A. */ | 
|  | st_mfp.tim_ct_a = 0;	/* ++roman: Stop timer before programming! */ | 
|  | st_mfp.tim_dt_a = 1;	/* Cause interrupt after first event. */ | 
|  | st_mfp.tim_ct_a = 8;	/* Turn on event counting. */ | 
|  | /* Register interrupt handler. */ | 
|  | if (request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound", | 
|  | AtaInterrupt)) | 
|  | return 0; | 
|  | st_mfp.int_en_a |= 0x20;	/* Turn interrupt on. */ | 
|  | st_mfp.int_mk_a |= 0x20; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef MODULE | 
|  | static void AtaIrqCleanUp(void) | 
|  | { | 
|  | st_mfp.tim_ct_a = 0;		/* stop timer */ | 
|  | st_mfp.int_en_a &= ~0x20;	/* turn interrupt off */ | 
|  | free_irq(IRQ_MFP_TIMA, AtaInterrupt); | 
|  | } | 
|  | #endif /* MODULE */ | 
|  |  | 
|  |  | 
|  | #define TONE_VOXWARE_TO_DB(v) \ | 
|  | (((v) < 0) ? -12 : ((v) > 100) ? 12 : ((v) - 50) * 6 / 25) | 
|  | #define TONE_DB_TO_VOXWARE(v) (((v) * 25 + ((v) > 0 ? 5 : -5)) / 6 + 50) | 
|  |  | 
|  |  | 
|  | static int AtaSetBass(int bass) | 
|  | { | 
|  | dmasound.bass = TONE_VOXWARE_TO_DB(bass); | 
|  | atari_microwire_cmd(MW_LM1992_BASS(dmasound.bass)); | 
|  | return TONE_DB_TO_VOXWARE(dmasound.bass); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int AtaSetTreble(int treble) | 
|  | { | 
|  | dmasound.treble = TONE_VOXWARE_TO_DB(treble); | 
|  | atari_microwire_cmd(MW_LM1992_TREBLE(dmasound.treble)); | 
|  | return TONE_DB_TO_VOXWARE(dmasound.treble); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * TT | 
|  | */ | 
|  |  | 
|  |  | 
|  | static void TTSilence(void) | 
|  | { | 
|  | tt_dmasnd.ctrl = DMASND_CTRL_OFF; | 
|  | atari_microwire_cmd(MW_LM1992_PSG_HIGH); /* mix in PSG signal 1:1 */ | 
|  | } | 
|  |  | 
|  |  | 
|  | static void TTInit(void) | 
|  | { | 
|  | int mode, i, idx; | 
|  | const int freq[4] = {50066, 25033, 12517, 6258}; | 
|  |  | 
|  | /* search a frequency that fits into the allowed error range */ | 
|  |  | 
|  | idx = -1; | 
|  | for (i = 0; i < ARRAY_SIZE(freq); i++) | 
|  | /* this isn't as much useful for a TT than for a Falcon, but | 
|  | * then it doesn't hurt very much to implement it for a TT too. | 
|  | */ | 
|  | if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) | 
|  | idx = i; | 
|  | if (idx > -1) { | 
|  | dmasound.soft.speed = freq[idx]; | 
|  | dmasound.trans_write = &transTTNormal; | 
|  | } else | 
|  | dmasound.trans_write = &transTTExpanding; | 
|  |  | 
|  | TTSilence(); | 
|  | dmasound.hard = dmasound.soft; | 
|  |  | 
|  | if (dmasound.hard.speed > 50066) { | 
|  | /* we would need to squeeze the sound, but we won't do that */ | 
|  | dmasound.hard.speed = 50066; | 
|  | mode = DMASND_MODE_50KHZ; | 
|  | dmasound.trans_write = &transTTNormal; | 
|  | } else if (dmasound.hard.speed > 25033) { | 
|  | dmasound.hard.speed = 50066; | 
|  | mode = DMASND_MODE_50KHZ; | 
|  | } else if (dmasound.hard.speed > 12517) { | 
|  | dmasound.hard.speed = 25033; | 
|  | mode = DMASND_MODE_25KHZ; | 
|  | } else if (dmasound.hard.speed > 6258) { | 
|  | dmasound.hard.speed = 12517; | 
|  | mode = DMASND_MODE_12KHZ; | 
|  | } else { | 
|  | dmasound.hard.speed = 6258; | 
|  | mode = DMASND_MODE_6KHZ; | 
|  | } | 
|  |  | 
|  | tt_dmasnd.mode = (dmasound.hard.stereo ? | 
|  | DMASND_MODE_STEREO : DMASND_MODE_MONO) | | 
|  | DMASND_MODE_8BIT | mode; | 
|  |  | 
|  | expand_bal = -dmasound.soft.speed; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int TTSetFormat(int format) | 
|  | { | 
|  | /* TT sound DMA supports only 8bit modes */ | 
|  |  | 
|  | switch (format) { | 
|  | case AFMT_QUERY: | 
|  | return dmasound.soft.format; | 
|  | case AFMT_MU_LAW: | 
|  | case AFMT_A_LAW: | 
|  | case AFMT_S8: | 
|  | case AFMT_U8: | 
|  | break; | 
|  | default: | 
|  | format = AFMT_S8; | 
|  | } | 
|  |  | 
|  | dmasound.soft.format = format; | 
|  | dmasound.soft.size = 8; | 
|  | if (dmasound.minDev == SND_DEV_DSP) { | 
|  | dmasound.dsp.format = format; | 
|  | dmasound.dsp.size = 8; | 
|  | } | 
|  | TTInit(); | 
|  |  | 
|  | return format; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define VOLUME_VOXWARE_TO_DB(v) \ | 
|  | (((v) < 0) ? -40 : ((v) > 100) ? 0 : ((v) * 2) / 5 - 40) | 
|  | #define VOLUME_DB_TO_VOXWARE(v) ((((v) + 40) * 5 + 1) / 2) | 
|  |  | 
|  |  | 
|  | static int TTSetVolume(int volume) | 
|  | { | 
|  | dmasound.volume_left = VOLUME_VOXWARE_TO_DB(volume & 0xff); | 
|  | atari_microwire_cmd(MW_LM1992_BALLEFT(dmasound.volume_left)); | 
|  | dmasound.volume_right = VOLUME_VOXWARE_TO_DB((volume & 0xff00) >> 8); | 
|  | atari_microwire_cmd(MW_LM1992_BALRIGHT(dmasound.volume_right)); | 
|  | return VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | | 
|  | (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8); | 
|  | } | 
|  |  | 
|  |  | 
|  | #define GAIN_VOXWARE_TO_DB(v) \ | 
|  | (((v) < 0) ? -80 : ((v) > 100) ? 0 : ((v) * 4) / 5 - 80) | 
|  | #define GAIN_DB_TO_VOXWARE(v) ((((v) + 80) * 5 + 1) / 4) | 
|  |  | 
|  | static int TTSetGain(int gain) | 
|  | { | 
|  | dmasound.gain = GAIN_VOXWARE_TO_DB(gain); | 
|  | atari_microwire_cmd(MW_LM1992_VOLUME(dmasound.gain)); | 
|  | return GAIN_DB_TO_VOXWARE(dmasound.gain); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Falcon | 
|  | */ | 
|  |  | 
|  |  | 
|  | static void FalconSilence(void) | 
|  | { | 
|  | /* stop playback, set sample rate 50kHz for PSG sound */ | 
|  | tt_dmasnd.ctrl = DMASND_CTRL_OFF; | 
|  | tt_dmasnd.mode = DMASND_MODE_50KHZ | DMASND_MODE_STEREO | DMASND_MODE_8BIT; | 
|  | tt_dmasnd.int_div = 0; /* STE compatible divider */ | 
|  | tt_dmasnd.int_ctrl = 0x0; | 
|  | tt_dmasnd.cbar_src = 0x0000; /* no matrix inputs */ | 
|  | tt_dmasnd.cbar_dst = 0x0000; /* no matrix outputs */ | 
|  | tt_dmasnd.dac_src = 1; /* connect ADC to DAC, disconnect matrix */ | 
|  | tt_dmasnd.adc_src = 3; /* ADC Input = PSG */ | 
|  | } | 
|  |  | 
|  |  | 
|  | static void FalconInit(void) | 
|  | { | 
|  | int divider, i, idx; | 
|  | const int freq[8] = {49170, 32780, 24585, 19668, 16390, 12292, 9834, 8195}; | 
|  |  | 
|  | /* search a frequency that fits into the allowed error range */ | 
|  |  | 
|  | idx = -1; | 
|  | for (i = 0; i < ARRAY_SIZE(freq); i++) | 
|  | /* if we will tolerate 3% error 8000Hz->8195Hz (2.38%) would | 
|  | * be playable without expanding, but that now a kernel runtime | 
|  | * option | 
|  | */ | 
|  | if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) | 
|  | idx = i; | 
|  | if (idx > -1) { | 
|  | dmasound.soft.speed = freq[idx]; | 
|  | dmasound.trans_write = &transFalconNormal; | 
|  | } else | 
|  | dmasound.trans_write = &transFalconExpanding; | 
|  |  | 
|  | FalconSilence(); | 
|  | dmasound.hard = dmasound.soft; | 
|  |  | 
|  | if (dmasound.hard.size == 16) { | 
|  | /* the Falcon can play 16bit samples only in stereo */ | 
|  | dmasound.hard.stereo = 1; | 
|  | } | 
|  |  | 
|  | if (dmasound.hard.speed > 49170) { | 
|  | /* we would need to squeeze the sound, but we won't do that */ | 
|  | dmasound.hard.speed = 49170; | 
|  | divider = 1; | 
|  | dmasound.trans_write = &transFalconNormal; | 
|  | } else if (dmasound.hard.speed > 32780) { | 
|  | dmasound.hard.speed = 49170; | 
|  | divider = 1; | 
|  | } else if (dmasound.hard.speed > 24585) { | 
|  | dmasound.hard.speed = 32780; | 
|  | divider = 2; | 
|  | } else if (dmasound.hard.speed > 19668) { | 
|  | dmasound.hard.speed = 24585; | 
|  | divider = 3; | 
|  | } else if (dmasound.hard.speed > 16390) { | 
|  | dmasound.hard.speed = 19668; | 
|  | divider = 4; | 
|  | } else if (dmasound.hard.speed > 12292) { | 
|  | dmasound.hard.speed = 16390; | 
|  | divider = 5; | 
|  | } else if (dmasound.hard.speed > 9834) { | 
|  | dmasound.hard.speed = 12292; | 
|  | divider = 7; | 
|  | } else if (dmasound.hard.speed > 8195) { | 
|  | dmasound.hard.speed = 9834; | 
|  | divider = 9; | 
|  | } else { | 
|  | dmasound.hard.speed = 8195; | 
|  | divider = 11; | 
|  | } | 
|  | tt_dmasnd.int_div = divider; | 
|  |  | 
|  | /* Setup Falcon sound DMA for playback */ | 
|  | tt_dmasnd.int_ctrl = 0x4; /* Timer A int at play end */ | 
|  | tt_dmasnd.track_select = 0x0; /* play 1 track, track 1 */ | 
|  | tt_dmasnd.cbar_src = 0x0001; /* DMA(25MHz) --> DAC */ | 
|  | tt_dmasnd.cbar_dst = 0x0000; | 
|  | tt_dmasnd.rec_track_select = 0; | 
|  | tt_dmasnd.dac_src = 2; /* connect matrix to DAC */ | 
|  | tt_dmasnd.adc_src = 0; /* ADC Input = Mic */ | 
|  |  | 
|  | tt_dmasnd.mode = (dmasound.hard.stereo ? | 
|  | DMASND_MODE_STEREO : DMASND_MODE_MONO) | | 
|  | ((dmasound.hard.size == 8) ? | 
|  | DMASND_MODE_8BIT : DMASND_MODE_16BIT) | | 
|  | DMASND_MODE_6KHZ; | 
|  |  | 
|  | expand_bal = -dmasound.soft.speed; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int FalconSetFormat(int format) | 
|  | { | 
|  | int size; | 
|  | /* Falcon sound DMA supports 8bit and 16bit modes */ | 
|  |  | 
|  | switch (format) { | 
|  | case AFMT_QUERY: | 
|  | return dmasound.soft.format; | 
|  | case AFMT_MU_LAW: | 
|  | case AFMT_A_LAW: | 
|  | case AFMT_U8: | 
|  | case AFMT_S8: | 
|  | size = 8; | 
|  | break; | 
|  | case AFMT_S16_BE: | 
|  | case AFMT_U16_BE: | 
|  | case AFMT_S16_LE: | 
|  | case AFMT_U16_LE: | 
|  | size = 16; | 
|  | break; | 
|  | default: /* :-) */ | 
|  | size = 8; | 
|  | format = AFMT_S8; | 
|  | } | 
|  |  | 
|  | dmasound.soft.format = format; | 
|  | dmasound.soft.size = size; | 
|  | if (dmasound.minDev == SND_DEV_DSP) { | 
|  | dmasound.dsp.format = format; | 
|  | dmasound.dsp.size = dmasound.soft.size; | 
|  | } | 
|  |  | 
|  | FalconInit(); | 
|  |  | 
|  | return format; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* This is for the Falcon output *attenuation* in 1.5dB steps, | 
|  | * i.e. output level from 0 to -22.5dB in -1.5dB steps. | 
|  | */ | 
|  | #define VOLUME_VOXWARE_TO_ATT(v) \ | 
|  | ((v) < 0 ? 15 : (v) > 100 ? 0 : 15 - (v) * 3 / 20) | 
|  | #define VOLUME_ATT_TO_VOXWARE(v) (100 - (v) * 20 / 3) | 
|  |  | 
|  |  | 
|  | static int FalconSetVolume(int volume) | 
|  | { | 
|  | dmasound.volume_left = VOLUME_VOXWARE_TO_ATT(volume & 0xff); | 
|  | dmasound.volume_right = VOLUME_VOXWARE_TO_ATT((volume & 0xff00) >> 8); | 
|  | tt_dmasnd.output_atten = dmasound.volume_left << 8 | dmasound.volume_right << 4; | 
|  | return VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | | 
|  | VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void AtaPlayNextFrame(int index) | 
|  | { | 
|  | char *start, *end; | 
|  |  | 
|  | /* used by AtaPlay() if all doubts whether there really is something | 
|  | * to be played are already wiped out. | 
|  | */ | 
|  | start = write_sq.buffers[write_sq.front]; | 
|  | end = start+((write_sq.count == index) ? write_sq.rear_size | 
|  | : write_sq.block_size); | 
|  | /* end might not be a legal virtual address. */ | 
|  | DMASNDSetEnd(virt_to_phys(end - 1) + 1); | 
|  | DMASNDSetBase(virt_to_phys(start)); | 
|  | /* Since only an even number of samples per frame can | 
|  | be played, we might lose one byte here. (TO DO) */ | 
|  | write_sq.front = (write_sq.front+1) % write_sq.max_count; | 
|  | write_sq.active++; | 
|  | tt_dmasnd.ctrl = DMASND_CTRL_ON | DMASND_CTRL_REPEAT; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void AtaPlay(void) | 
|  | { | 
|  | /* ++TeSche: Note that write_sq.active is no longer just a flag but | 
|  | * holds the number of frames the DMA is currently programmed for | 
|  | * instead, may be 0, 1 (currently being played) or 2 (pre-programmed). | 
|  | * | 
|  | * Changes done to write_sq.count and write_sq.active are a bit more | 
|  | * subtle again so now I must admit I also prefer disabling the irq | 
|  | * here rather than considering all possible situations. But the point | 
|  | * is that disabling the irq doesn't have any bad influence on this | 
|  | * version of the driver as we benefit from having pre-programmed the | 
|  | * DMA wherever possible: There's no need to reload the DMA at the | 
|  | * exact time of an interrupt but only at some time while the | 
|  | * pre-programmed frame is playing! | 
|  | */ | 
|  | atari_disable_irq(IRQ_MFP_TIMA); | 
|  |  | 
|  | if (write_sq.active == 2 ||	/* DMA is 'full' */ | 
|  | write_sq.count <= 0) {	/* nothing to do */ | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (write_sq.active == 0) { | 
|  | /* looks like there's nothing 'in' the DMA yet, so try | 
|  | * to put two frames into it (at least one is available). | 
|  | */ | 
|  | if (write_sq.count == 1 && | 
|  | write_sq.rear_size < write_sq.block_size && | 
|  | !write_sq.syncing) { | 
|  | /* hmmm, the only existing frame is not | 
|  | * yet filled and we're not syncing? | 
|  | */ | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | return; | 
|  | } | 
|  | AtaPlayNextFrame(1); | 
|  | if (write_sq.count == 1) { | 
|  | /* no more frames */ | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | return; | 
|  | } | 
|  | if (write_sq.count == 2 && | 
|  | write_sq.rear_size < write_sq.block_size && | 
|  | !write_sq.syncing) { | 
|  | /* hmmm, there were two frames, but the second | 
|  | * one is not yet filled and we're not syncing? | 
|  | */ | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | return; | 
|  | } | 
|  | AtaPlayNextFrame(2); | 
|  | } else { | 
|  | /* there's already a frame being played so we may only stuff | 
|  | * one new into the DMA, but even if this may be the last | 
|  | * frame existing the previous one is still on write_sq.count. | 
|  | */ | 
|  | if (write_sq.count == 2 && | 
|  | write_sq.rear_size < write_sq.block_size && | 
|  | !write_sq.syncing) { | 
|  | /* hmmm, the only existing frame is not | 
|  | * yet filled and we're not syncing? | 
|  | */ | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | return; | 
|  | } | 
|  | AtaPlayNextFrame(2); | 
|  | } | 
|  | atari_enable_irq(IRQ_MFP_TIMA); | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t AtaInterrupt(int irq, void *dummy) | 
|  | { | 
|  | #if 0 | 
|  | /* ++TeSche: if you should want to test this... */ | 
|  | static int cnt; | 
|  | if (write_sq.active == 2) | 
|  | if (++cnt == 10) { | 
|  | /* simulate losing an interrupt */ | 
|  | cnt = 0; | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | #endif | 
|  | spin_lock(&dmasound.lock); | 
|  | if (write_sq_ignore_int && is_falcon) { | 
|  | /* ++TeSche: Falcon only: ignore first irq because it comes | 
|  | * immediately after starting a frame. after that, irqs come | 
|  | * (almost) like on the TT. | 
|  | */ | 
|  | write_sq_ignore_int = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!write_sq.active) { | 
|  | /* playing was interrupted and sq_reset() has already cleared | 
|  | * the sq variables, so better don't do anything here. | 
|  | */ | 
|  | WAKE_UP(write_sq.sync_queue); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Probably ;) one frame is finished. Well, in fact it may be that a | 
|  | * pre-programmed one is also finished because there has been a long | 
|  | * delay in interrupt delivery and we've completely lost one, but | 
|  | * there's no way to detect such a situation. In such a case the last | 
|  | * frame will be played more than once and the situation will recover | 
|  | * as soon as the irq gets through. | 
|  | */ | 
|  | write_sq.count--; | 
|  | write_sq.active--; | 
|  |  | 
|  | if (!write_sq.active) { | 
|  | tt_dmasnd.ctrl = DMASND_CTRL_OFF; | 
|  | write_sq_ignore_int = 1; | 
|  | } | 
|  |  | 
|  | WAKE_UP(write_sq.action_queue); | 
|  | /* At least one block of the queue is free now | 
|  | so wake up a writing process blocked because | 
|  | of a full queue. */ | 
|  |  | 
|  | if ((write_sq.active != 1) || (write_sq.count != 1)) | 
|  | /* We must be a bit carefully here: write_sq.count indicates the | 
|  | * number of buffers used and not the number of frames to be | 
|  | * played. If write_sq.count==1 and write_sq.active==1 that | 
|  | * means the only remaining frame was already programmed | 
|  | * earlier (and is currently running) so we mustn't call | 
|  | * AtaPlay() here, otherwise we'll play one frame too much. | 
|  | */ | 
|  | AtaPlay(); | 
|  |  | 
|  | if (!write_sq.active) WAKE_UP(write_sq.sync_queue); | 
|  | /* We are not playing after AtaPlay(), so there | 
|  | is nothing to play any more. Wake up a process | 
|  | waiting for audio output to drain. */ | 
|  | out: | 
|  | spin_unlock(&dmasound.lock); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*** Mid level stuff *********************************************************/ | 
|  |  | 
|  |  | 
|  | /* | 
|  | * /dev/mixer abstraction | 
|  | */ | 
|  |  | 
|  | #define RECLEVEL_VOXWARE_TO_GAIN(v)	\ | 
|  | ((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20) | 
|  | #define RECLEVEL_GAIN_TO_VOXWARE(v)	(((v) * 20 + 2) / 3) | 
|  |  | 
|  |  | 
|  | static void __init TTMixerInit(void) | 
|  | { | 
|  | atari_microwire_cmd(MW_LM1992_VOLUME(0)); | 
|  | dmasound.volume_left = 0; | 
|  | atari_microwire_cmd(MW_LM1992_BALLEFT(0)); | 
|  | dmasound.volume_right = 0; | 
|  | atari_microwire_cmd(MW_LM1992_BALRIGHT(0)); | 
|  | atari_microwire_cmd(MW_LM1992_TREBLE(0)); | 
|  | atari_microwire_cmd(MW_LM1992_BASS(0)); | 
|  | } | 
|  |  | 
|  | static void __init FalconMixerInit(void) | 
|  | { | 
|  | dmasound.volume_left = (tt_dmasnd.output_atten & 0xf00) >> 8; | 
|  | dmasound.volume_right = (tt_dmasnd.output_atten & 0xf0) >> 4; | 
|  | } | 
|  |  | 
|  | static int AtaMixerIoctl(u_int cmd, u_long arg) | 
|  | { | 
|  | int data; | 
|  | unsigned long flags; | 
|  | switch (cmd) { | 
|  | case SOUND_MIXER_READ_SPEAKER: | 
|  | if (is_falcon || MACH_IS_TT) { | 
|  | int porta; | 
|  | spin_lock_irqsave(&dmasound.lock, flags); | 
|  | sound_ym.rd_data_reg_sel = 14; | 
|  | porta = sound_ym.rd_data_reg_sel; | 
|  | spin_unlock_irqrestore(&dmasound.lock, flags); | 
|  | return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); | 
|  | } | 
|  | break; | 
|  | case SOUND_MIXER_WRITE_VOLUME: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_volume(data)); | 
|  | case SOUND_MIXER_WRITE_SPEAKER: | 
|  | if (is_falcon || MACH_IS_TT) { | 
|  | int porta; | 
|  | IOCTL_IN(arg, data); | 
|  | spin_lock_irqsave(&dmasound.lock, flags); | 
|  | sound_ym.rd_data_reg_sel = 14; | 
|  | porta = (sound_ym.rd_data_reg_sel & ~0x40) | | 
|  | (data < 50 ? 0x40 : 0); | 
|  | sound_ym.wd_data = porta; | 
|  | spin_unlock_irqrestore(&dmasound.lock, flags); | 
|  | return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); | 
|  | } | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int TTMixerIoctl(u_int cmd, u_long arg) | 
|  | { | 
|  | int data; | 
|  | switch (cmd) { | 
|  | case SOUND_MIXER_READ_RECMASK: | 
|  | return IOCTL_OUT(arg, 0); | 
|  | case SOUND_MIXER_READ_DEVMASK: | 
|  | return IOCTL_OUT(arg, | 
|  | SOUND_MASK_VOLUME | SOUND_MASK_TREBLE | SOUND_MASK_BASS | | 
|  | (MACH_IS_TT ? SOUND_MASK_SPEAKER : 0)); | 
|  | case SOUND_MIXER_READ_STEREODEVS: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_VOLUME); | 
|  | case SOUND_MIXER_READ_VOLUME: | 
|  | return IOCTL_OUT(arg, | 
|  | VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | | 
|  | (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8)); | 
|  | case SOUND_MIXER_READ_BASS: | 
|  | return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.bass)); | 
|  | case SOUND_MIXER_READ_TREBLE: | 
|  | return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.treble)); | 
|  | case SOUND_MIXER_READ_OGAIN: | 
|  | return IOCTL_OUT(arg, GAIN_DB_TO_VOXWARE(dmasound.gain)); | 
|  | case SOUND_MIXER_WRITE_BASS: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_bass(data)); | 
|  | case SOUND_MIXER_WRITE_TREBLE: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_treble(data)); | 
|  | case SOUND_MIXER_WRITE_OGAIN: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_gain(data)); | 
|  | } | 
|  | return AtaMixerIoctl(cmd, arg); | 
|  | } | 
|  |  | 
|  | static int FalconMixerIoctl(u_int cmd, u_long arg) | 
|  | { | 
|  | int data; | 
|  | switch (cmd) { | 
|  | case SOUND_MIXER_READ_RECMASK: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_MIC); | 
|  | case SOUND_MIXER_READ_DEVMASK: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC | SOUND_MASK_SPEAKER); | 
|  | case SOUND_MIXER_READ_STEREODEVS: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC); | 
|  | case SOUND_MIXER_READ_VOLUME: | 
|  | return IOCTL_OUT(arg, | 
|  | VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | | 
|  | VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8); | 
|  | case SOUND_MIXER_READ_CAPS: | 
|  | return IOCTL_OUT(arg, SOUND_CAP_EXCL_INPUT); | 
|  | case SOUND_MIXER_WRITE_MIC: | 
|  | IOCTL_IN(arg, data); | 
|  | tt_dmasnd.input_gain = | 
|  | RECLEVEL_VOXWARE_TO_GAIN(data & 0xff) << 4 | | 
|  | RECLEVEL_VOXWARE_TO_GAIN(data >> 8 & 0xff); | 
|  | /* fall thru, return set value */ | 
|  | case SOUND_MIXER_READ_MIC: | 
|  | return IOCTL_OUT(arg, | 
|  | RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain >> 4 & 0xf) | | 
|  | RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain & 0xf) << 8); | 
|  | } | 
|  | return AtaMixerIoctl(cmd, arg); | 
|  | } | 
|  |  | 
|  | static int AtaWriteSqSetup(void) | 
|  | { | 
|  | write_sq_ignore_int = 0; | 
|  | return 0 ; | 
|  | } | 
|  |  | 
|  | static int AtaSqOpen(fmode_t mode) | 
|  | { | 
|  | write_sq_ignore_int = 1; | 
|  | return 0 ; | 
|  | } | 
|  |  | 
|  | static int TTStateInfo(char *buffer, size_t space) | 
|  | { | 
|  | int len = 0; | 
|  | len += sprintf(buffer+len, "\tvol left  %ddB [-40...  0]\n", | 
|  | dmasound.volume_left); | 
|  | len += sprintf(buffer+len, "\tvol right %ddB [-40...  0]\n", | 
|  | dmasound.volume_right); | 
|  | len += sprintf(buffer+len, "\tbass      %ddB [-12...+12]\n", | 
|  | dmasound.bass); | 
|  | len += sprintf(buffer+len, "\ttreble    %ddB [-12...+12]\n", | 
|  | dmasound.treble); | 
|  | if (len >= space) { | 
|  | printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; | 
|  | len = space ; | 
|  | } | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int FalconStateInfo(char *buffer, size_t space) | 
|  | { | 
|  | int len = 0; | 
|  | len += sprintf(buffer+len, "\tvol left  %ddB [-22.5 ... 0]\n", | 
|  | dmasound.volume_left); | 
|  | len += sprintf(buffer+len, "\tvol right %ddB [-22.5 ... 0]\n", | 
|  | dmasound.volume_right); | 
|  | if (len >= space) { | 
|  | printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; | 
|  | len = space ; | 
|  | } | 
|  | return len; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*** Machine definitions *****************************************************/ | 
|  |  | 
|  | static SETTINGS def_hard_falcon = { | 
|  | .format		= AFMT_S8, | 
|  | .stereo		= 0, | 
|  | .size		= 8, | 
|  | .speed		= 8195 | 
|  | } ; | 
|  |  | 
|  | static SETTINGS def_hard_tt = { | 
|  | .format	= AFMT_S8, | 
|  | .stereo	= 0, | 
|  | .size	= 8, | 
|  | .speed	= 12517 | 
|  | } ; | 
|  |  | 
|  | static SETTINGS def_soft = { | 
|  | .format	= AFMT_U8, | 
|  | .stereo	= 0, | 
|  | .size	= 8, | 
|  | .speed	= 8000 | 
|  | } ; | 
|  |  | 
|  | static __initdata MACHINE machTT = { | 
|  | .name		= "Atari", | 
|  | .name2		= "TT", | 
|  | .owner		= THIS_MODULE, | 
|  | .dma_alloc	= AtaAlloc, | 
|  | .dma_free	= AtaFree, | 
|  | .irqinit	= AtaIrqInit, | 
|  | #ifdef MODULE | 
|  | .irqcleanup	= AtaIrqCleanUp, | 
|  | #endif /* MODULE */ | 
|  | .init		= TTInit, | 
|  | .silence	= TTSilence, | 
|  | .setFormat	= TTSetFormat, | 
|  | .setVolume	= TTSetVolume, | 
|  | .setBass	= AtaSetBass, | 
|  | .setTreble	= AtaSetTreble, | 
|  | .setGain	= TTSetGain, | 
|  | .play		= AtaPlay, | 
|  | .mixer_init	= TTMixerInit, | 
|  | .mixer_ioctl	= TTMixerIoctl, | 
|  | .write_sq_setup	= AtaWriteSqSetup, | 
|  | .sq_open	= AtaSqOpen, | 
|  | .state_info	= TTStateInfo, | 
|  | .min_dsp_speed	= 6258, | 
|  | .version	= ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), | 
|  | .hardware_afmts	= AFMT_S8,  /* h'ware-supported formats *only* here */ | 
|  | .capabilities	=  DSP_CAP_BATCH	/* As per SNDCTL_DSP_GETCAPS */ | 
|  | }; | 
|  |  | 
|  | static __initdata MACHINE machFalcon = { | 
|  | .name		= "Atari", | 
|  | .name2		= "FALCON", | 
|  | .dma_alloc	= AtaAlloc, | 
|  | .dma_free	= AtaFree, | 
|  | .irqinit	= AtaIrqInit, | 
|  | #ifdef MODULE | 
|  | .irqcleanup	= AtaIrqCleanUp, | 
|  | #endif /* MODULE */ | 
|  | .init		= FalconInit, | 
|  | .silence	= FalconSilence, | 
|  | .setFormat	= FalconSetFormat, | 
|  | .setVolume	= FalconSetVolume, | 
|  | .setBass	= AtaSetBass, | 
|  | .setTreble	= AtaSetTreble, | 
|  | .play		= AtaPlay, | 
|  | .mixer_init	= FalconMixerInit, | 
|  | .mixer_ioctl	= FalconMixerIoctl, | 
|  | .write_sq_setup	= AtaWriteSqSetup, | 
|  | .sq_open	= AtaSqOpen, | 
|  | .state_info	= FalconStateInfo, | 
|  | .min_dsp_speed	= 8195, | 
|  | .version	= ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), | 
|  | .hardware_afmts	= (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */ | 
|  | .capabilities	=  DSP_CAP_BATCH	/* As per SNDCTL_DSP_GETCAPS */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | /*** Config & Setup **********************************************************/ | 
|  |  | 
|  |  | 
|  | static int __init dmasound_atari_init(void) | 
|  | { | 
|  | if (MACH_IS_ATARI && ATARIHW_PRESENT(PCM_8BIT)) { | 
|  | if (ATARIHW_PRESENT(CODEC)) { | 
|  | dmasound.mach = machFalcon; | 
|  | dmasound.mach.default_soft = def_soft ; | 
|  | dmasound.mach.default_hard = def_hard_falcon ; | 
|  | is_falcon = 1; | 
|  | } else if (ATARIHW_PRESENT(MICROWIRE)) { | 
|  | dmasound.mach = machTT; | 
|  | dmasound.mach.default_soft = def_soft ; | 
|  | dmasound.mach.default_hard = def_hard_tt ; | 
|  | is_falcon = 0; | 
|  | } else | 
|  | return -ENODEV; | 
|  | if ((st_mfp.int_en_a & st_mfp.int_mk_a & 0x20) == 0) | 
|  | return dmasound_init(); | 
|  | else { | 
|  | printk("DMA sound driver: Timer A interrupt already in use\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void __exit dmasound_atari_cleanup(void) | 
|  | { | 
|  | dmasound_deinit(); | 
|  | } | 
|  |  | 
|  | module_init(dmasound_atari_init); | 
|  | module_exit(dmasound_atari_cleanup); | 
|  | MODULE_LICENSE("GPL"); |