ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
Saves a bit of text as the call takes fewer args.
Coalesce a few formats.
Convert a few bare printks to pr_cont.
$ size drivers/ata/built-in.o*
text data bss dec hex filename
558429 73893 117864 750186 b726a drivers/ata/built-in.o.allyesconfig.new
559574 73893 117888 751355 b76fb drivers/ata/built-in.o.allyesconfig.old
149567 14689 4220 168476 2921c drivers/ata/built-in.o.defconfig.new
149851 14689 4220 168760 29338 drivers/ata/built-in.o.defconfig.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 6f6e771..9842faa 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1225,8 +1225,9 @@
*/
rc = pci_reenable_device(pdev);
if (rc)
- dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
- "device after resume (%d)\n", rc);
+ dev_err(&pdev->dev,
+ "failed to enable device after resume (%d)\n",
+ rc);
} else
rc = ata_pci_device_do_resume(pdev);
@@ -1303,9 +1304,11 @@
no_piix_dma = 2;
}
if (no_piix_dma)
- dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
- if (no_piix_dma == 2)
- dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
+ dev_warn(&ata_dev->dev,
+ "450NX errata present, disabling IDE DMA%s\n",
+ no_piix_dma == 2 ? " - a BIOS update may resolve this"
+ : "");
+
return no_piix_dma;
}
@@ -1338,37 +1341,36 @@
map = map_db->map[map_value & map_db->mask];
- dev_printk(KERN_INFO, &pdev->dev, "MAP [");
+ dev_info(&pdev->dev, "MAP [");
for (i = 0; i < 4; i++) {
switch (map[i]) {
case RV:
invalid_map = 1;
- printk(" XX");
+ pr_cont(" XX");
break;
case NA:
- printk(" --");
+ pr_cont(" --");
break;
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich_pata_100];
i++;
- printk(" IDE IDE");
+ pr_cont(" IDE IDE");
break;
default:
- printk(" P%d", map[i]);
+ pr_cont(" P%d", map[i]);
if (i & 1)
pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
break;
}
}
- printk(" ]\n");
+ pr_cont(" ]\n");
if (invalid_map)
- dev_printk(KERN_ERR, &pdev->dev,
- "invalid MAP value %u\n", map_value);
+ dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);
return map;
}
@@ -1398,8 +1400,8 @@
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
pdev->subsystem_device == 0xb049) {
- dev_printk(KERN_WARNING, host->dev,
- "Samsung DB-P70 detected, disabling SIDPR\n");
+ dev_warn(host->dev,
+ "Samsung DB-P70 detected, disabling SIDPR\n");
return true;
}
@@ -1451,8 +1453,8 @@
piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
if ((scontrol & 0xf00) != 0x300) {
- dev_printk(KERN_INFO, host->dev, "SCR access via "
- "SIDPR is available but doesn't work\n");
+ dev_info(host->dev,
+ "SCR access via SIDPR is available but doesn't work\n");
return 0;
}
}
@@ -1501,8 +1503,7 @@
* affected systems.
*/
if (hpriv->saved_iocfg & (1 << 18)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "applying IOCFG bit18 quirk\n");
+ dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n");
pci_write_config_dword(pdev, PIIX_IOCFG,
hpriv->saved_iocfg & ~(1 << 18));
}