[media] anysee: convert to new DVB USB
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 03c2865..2a0798c 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -32,6 +32,7 @@
*/
#include "anysee.h"
+#include "dvb-pll.h"
#include "tda1002x.h"
#include "mt352.h"
#include "mt352_priv.h"
@@ -47,9 +48,6 @@
static int dvb_usb_anysee_debug;
module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-static int dvb_usb_anysee_delsys;
-module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
-MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static DEFINE_MUTEX(anysee_usb_mutex);
@@ -64,15 +62,14 @@
memcpy(&buf[0], sbuf, slen);
buf[60] = state->seq++;
- if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
- return -EAGAIN;
+ mutex_lock(&anysee_usb_mutex);
deb_xfer(">>> ");
debug_dump(buf, slen, deb_xfer);
/* We need receive one message more after dvb_usb_generic_rw due
to weird transaction flow, which is 1 x send + 2 x receive. */
- ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+ ret = dvb_usbv2_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
if (ret)
goto error_unlock;
@@ -91,7 +88,7 @@
for (i = 0; i < 3; i++) {
/* receive 2nd answer */
ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
- d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+ d->props->generic_bulk_ctrl_endpoint), buf, sizeof(buf),
&act_len, 2000);
if (ret) {
@@ -509,6 +506,32 @@
* IOE[5] STV0903 1=enabled
*/
+static int anysee_read_config(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d->priv;
+ int ret;
+ u8 hw_info[3];
+
+ /*
+ * Check which hardware we have.
+ * We must do this call two times to get reliable values (hw/fw bug).
+ */
+ ret = anysee_get_hw_info(d, hw_info);
+ if (ret)
+ goto error;
+
+ ret = anysee_get_hw_info(d, hw_info);
+ if (ret)
+ goto error;
+
+ /* Meaning of these info bytes are guessed. */
+ info("firmware version:%d.%d hardware id:%d",
+ hw_info[1], hw_info[2], hw_info[0]);
+
+ state->hw = hw_info[0];
+error:
+ return ret;
+}
/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
@@ -536,7 +559,7 @@
/* E30 Combo Plus */
/* E30 C Plus */
- if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ if (fe->id == 0) {
/* disable DVB-T demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
0x01);
@@ -580,7 +603,7 @@
/* E7 TC */
/* E7 PTC */
- if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ if (fe->id == 0) {
/* disable DVB-T demod on IOD[6] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
0x40);
@@ -631,7 +654,6 @@
{
int ret;
struct anysee_state *state = adap->dev->priv;
- u8 hw_info[3];
u8 tmp;
struct i2c_msg msg[2] = {
{
@@ -647,55 +669,24 @@
}
};
- /* detect hardware only once */
- if (adap->fe_adap[0].fe == NULL) {
- /* Check which hardware we have.
- * We must do this call two times to get reliable values
- * (hw/fw bug).
- */
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
-
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
-
- /* Meaning of these info bytes are guessed. */
- info("firmware version:%d.%d hardware id:%d",
- hw_info[1], hw_info[2], hw_info[0]);
-
- state->hw = hw_info[0];
- }
-
- /* set current frondend ID for devices having two frondends */
- if (adap->fe_adap[0].fe)
- state->fe_id++;
-
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
/* E30 */
- if (state->fe_id)
- break;
-
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(mt352_attach,
+ adap->fe[0] = dvb_attach(mt352_attach,
&anysee_mt352_config, &adap->dev->i2c_adap);
- if (adap->fe_adap[0].fe)
+ if (adap->fe[0])
break;
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+ adap->fe[0] = dvb_attach(zl10353_attach,
&anysee_zl10353_config, &adap->dev->i2c_adap);
break;
case ANYSEE_HW_507CD: /* 6 */
/* E30 Plus */
- if (state->fe_id)
- break;
-
/* enable DVB-T demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
@@ -707,39 +698,33 @@
goto error;
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+ adap->fe[0] = dvb_attach(zl10353_attach,
&anysee_zl10353_config, &adap->dev->i2c_adap);
break;
case ANYSEE_HW_507DC: /* 10 */
/* E30 C Plus */
- if (state->fe_id)
- break;
-
/* enable DVB-C demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
+ adap->fe[0] = dvb_attach(tda10023_attach,
&anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
break;
case ANYSEE_HW_507SI: /* 11 */
/* E30 S2 Plus */
- if (state->fe_id)
- break;
-
/* enable DVB-S/S2 demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(cx24116_attach,
+ adap->fe[0] = dvb_attach(cx24116_attach,
&anysee_cx24116_config, &adap->dev->i2c_adap);
break;
@@ -765,67 +750,64 @@
if (ret)
goto error;
- if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
- /* disable DVB-T demod on IOD[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
- 0x01);
- if (ret)
- goto error;
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0), 0x01);
+ if (ret)
+ goto error;
- /* enable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
- 0x20);
- if (ret)
- goto error;
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
- /* attach demod */
- if (tmp == 0xc7) {
- /* TDA18212 config */
- adap->fe_adap[state->fe_id].fe = dvb_attach(
- tda10023_attach,
+ /* attach demod */
+ if (tmp == 0xc7) {
+ /* TDA18212 config */
+ adap->fe[0] = dvb_attach(tda10023_attach,
&anysee_tda10023_tda18212_config,
&adap->dev->i2c_adap, 0x48);
- } else {
- /* PLL config */
- adap->fe_adap[state->fe_id].fe = dvb_attach(
- tda10023_attach,
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[0])
+ adap->fe[0]->ops.i2c_gate_ctrl =
+ anysee_i2c_gate_ctrl;
+ } else {
+ /* PLL config */
+ adap->fe[0] = dvb_attach(tda10023_attach,
&anysee_tda10023_config,
&adap->dev->i2c_adap, 0x48);
- }
- } else {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
- if (ret)
- goto error;
-
- /* enable DVB-T demod on IOD[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
- 0x01);
- if (ret)
- goto error;
-
- /* attach demod */
- if (tmp == 0xc7) {
- /* TDA18212 config */
- adap->fe_adap[state->fe_id].fe = dvb_attach(
- zl10353_attach,
- &anysee_zl10353_tda18212_config2,
- &adap->dev->i2c_adap);
- } else {
- /* PLL config */
- adap->fe_adap[state->fe_id].fe = dvb_attach(
- zl10353_attach,
- &anysee_zl10353_config,
- &adap->dev->i2c_adap);
- }
}
- /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ /* break out if first frontend attaching fails */
+ if (!adap->fe[0])
+ break;
+
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
if (tmp == 0xc7) {
- if (adap->fe_adap[state->fe_id].fe)
- adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
- anysee_i2c_gate_ctrl;
+ /* TDA18212 config */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config2,
+ &adap->dev->i2c_adap);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[1])
+ adap->fe[1]->ops.i2c_gate_ctrl =
+ anysee_i2c_gate_ctrl;
+ } else {
+ /* PLL config */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
}
break;
@@ -834,48 +816,47 @@
/* E7 TC */
/* E7 PTC */
- if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
- /* disable DVB-T demod on IOD[6] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
- 0x40);
- if (ret)
- goto error;
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6), 0x40);
+ if (ret)
+ goto error;
- /* enable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
- 0x20);
- if (ret)
- goto error;
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
- /* attach demod */
- adap->fe_adap[state->fe_id].fe =
- dvb_attach(tda10023_attach,
+ /* attach demod */
+ adap->fe[0] = dvb_attach(tda10023_attach,
&anysee_tda10023_tda18212_config,
&adap->dev->i2c_adap, 0x48);
- } else {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
- if (ret)
- goto error;
-
- /* enable DVB-T demod on IOD[6] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
- 0x40);
- if (ret)
- goto error;
-
- /* attach demod */
- adap->fe_adap[state->fe_id].fe =
- dvb_attach(zl10353_attach,
- &anysee_zl10353_tda18212_config,
- &adap->dev->i2c_adap);
- }
/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
- if (adap->fe_adap[state->fe_id].fe)
- adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
- anysee_i2c_gate_ctrl;
+ if (adap->fe[0])
+ adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
+
+ /* break out if first frontend attaching fails */
+ if (!adap->fe[0])
+ break;
+
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6), 0x40);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config,
+ &adap->dev->i2c_adap);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[1])
+ adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
state->has_ci = true;
@@ -885,16 +866,13 @@
/* E7 S2 */
/* E7 PS2 */
- if (state->fe_id)
- break;
-
/* enable DVB-S/S2 demod on IOE[5] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
if (ret)
goto error;
/* attach demod */
- adap->fe_adap[0].fe = dvb_attach(stv0900_attach,
+ adap->fe[0] = dvb_attach(stv0900_attach,
&anysee_stv0900_config, &adap->dev->i2c_adap, 0);
state->has_ci = true;
@@ -903,16 +881,13 @@
case ANYSEE_HW_508T2C: /* 20 */
/* E7 T2C */
- if (state->fe_id)
- break;
-
/* enable DVB-T/T2/C demod on IOE[5] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
if (ret)
goto error;
/* attach demod */
- adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach,
+ adap->fe[0] = dvb_attach(cxd2820r_attach,
&anysee_cxd2820r_config, &adap->dev->i2c_adap);
state->has_ci = true;
@@ -920,7 +895,7 @@
break;
}
- if (!adap->fe_adap[0].fe) {
+ if (!adap->fe[0]) {
/* we have no frontend :-( */
ret = -ENODEV;
err("Unsupported Anysee version. " \
@@ -935,14 +910,14 @@
struct anysee_state *state = adap->dev->priv;
struct dvb_frontend *fe;
int ret;
- deb_info("%s: fe=%d\n", __func__, state->fe_id);
+ deb_info("%s: adap=%d\n", __func__, adap->id);
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
/* E30 */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0],
(0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579);
break;
@@ -950,7 +925,7 @@
/* E30 Plus */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0],
(0xc2 >> 1), &adap->dev->i2c_adap,
DVB_PLL_THOMSON_DTT7579);
@@ -959,7 +934,7 @@
/* E30 C Plus */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0],
(0xc0 >> 1), &adap->dev->i2c_adap,
DVB_PLL_SAMSUNG_DTOS403IH102A);
@@ -968,7 +943,7 @@
/* E30 S2 Plus */
/* attach LNB controller */
- fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(isl6423_attach, adap->fe[0],
&adap->dev->i2c_adap, &anysee_isl6423_config);
break;
@@ -980,15 +955,30 @@
* fails attach old simple PLL. */
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
- &adap->dev->i2c_adap, &anysee_tda18212_config);
- if (fe)
+ fe = dvb_attach(tda18212_attach, adap->fe[0],
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
+
+ if (fe && adap->fe[1]) {
+ /* attach tuner for 2nd FE */
+ fe = dvb_attach(tda18212_attach, adap->fe[1],
+ &adap->dev->i2c_adap,
+ &anysee_tda18212_config);
break;
+ } else if (fe) {
+ break;
+ }
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe,
- (0xc0 >> 1), &adap->dev->i2c_adap,
- DVB_PLL_SAMSUNG_DTOS403IH102A);
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
+ &adap->dev->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+ if (fe && adap->fe[1]) {
+ /* attach tuner for 2nd FE */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+ (0xc0 >> 1), &adap->dev->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
+ }
break;
case ANYSEE_HW_508TC: /* 18 */
@@ -997,9 +987,15 @@
/* E7 PTC */
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+ fe = dvb_attach(tda18212_attach, adap->fe[0],
&adap->dev->i2c_adap, &anysee_tda18212_config);
+ if (fe) {
+ /* attach tuner for 2nd FE */
+ fe = dvb_attach(tda18212_attach, adap->fe[1],
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
+ }
+
break;
case ANYSEE_HW_508S2: /* 19 */
case ANYSEE_HW_508PS2: /* 22 */
@@ -1007,12 +1003,12 @@
/* E7 PS2 */
/* attach tuner */
- fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(stv6110_attach, adap->fe[0],
&anysee_stv6110_config, &adap->dev->i2c_adap);
if (fe) {
/* attach LNB controller */
- fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(isl6423_attach, adap->fe[0],
&adap->dev->i2c_adap, &anysee_isl6423_config);
}
@@ -1022,7 +1018,7 @@
/* E7 T2C */
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+ fe = dvb_attach(tda18212_attach, adap->fe[0],
&adap->dev->i2c_adap, &anysee_tda18212_config2);
break;
@@ -1064,6 +1060,15 @@
return 0;
}
+static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ rc->allowed_protos = RC_TYPE_NEC;
+ rc->query = anysee_rc_query;
+ rc->interval = 250; /* windows driver uses 500ms */
+
+ return 0;
+}
+
static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
int addr)
{
@@ -1245,6 +1250,14 @@
struct anysee_state *state = d->priv;
int ret;
+ /* There is one interface with two alternate settings.
+ Alternate setting 0 is for bulk transfer.
+ Alternate setting 1 is for isochronous transfer.
+ We use bulk transfer (alternate setting 0). */
+ ret = usb_set_interface(d->udev, 0, 0);
+ if (ret)
+ return ret;
+
/* LED light */
ret = anysee_led_ctrl(d, 0x01, 0x03);
if (ret)
@@ -1267,80 +1280,34 @@
return 0;
}
+static void anysee_disconnect(struct dvb_usb_device *d)
+{
+ return anysee_ci_release(d);
+}
+
/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties anysee_properties;
+static struct dvb_usb_device_properties anysee_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct anysee_state),
-static int anysee_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct dvb_usb_device *d;
- struct usb_host_interface *alt;
- int ret;
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
- /* There is one interface with two alternate settings.
- Alternate setting 0 is for bulk transfer.
- Alternate setting 1 is for isochronous transfer.
- We use bulk transfer (alternate setting 0). */
- if (intf->num_altsetting < 1)
- return -ENODEV;
-
- /*
- * Anysee is always warm (its USB-bridge, Cypress FX2, uploads
- * firmware from eeprom). If dvb_usb_device_init() succeeds that
- * means d is a valid pointer.
- */
- ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
- adapter_nr);
- if (ret)
- return ret;
-
- alt = usb_altnum_to_altsetting(intf, 0);
- if (alt == NULL) {
- deb_info("%s: no alt found!\n", __func__);
- return -ENODEV;
- }
-
- ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
- alt->desc.bAlternateSetting);
- if (ret)
- return ret;
-
- return anysee_init(d);
-}
-
-static void anysee_disconnect(struct usb_interface *intf)
-{
- struct dvb_usb_device *d = usb_get_intfdata(intf);
-
- anysee_ci_release(d);
- dvb_usb_device_exit(intf);
-
- return;
-}
-
-static struct usb_device_id anysee_table[] = {
- { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
- { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) },
- { } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, anysee_table);
-
-static struct dvb_usb_device_properties anysee_properties = {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
- .usb_ctrl = DEVICE_SPECIFIC,
-
- .size_of_priv = sizeof(struct anysee_state),
+ .i2c_algo = &anysee_i2c_algo,
+ .read_config = anysee_read_config,
+ .frontend_attach = anysee_frontend_attach,
+ .tuner_attach = anysee_tuner_attach,
+ .init = anysee_init,
+ .get_rc_config = anysee_get_rc_config,
+ .frontend_ctrl = anysee_frontend_ctrl,
+ .streaming_ctrl = anysee_streaming_ctrl,
+ .disconnect = anysee_disconnect,
.num_adapters = 1,
.adapter = {
{
- .num_frontends = 2,
- .frontend_ctrl = anysee_frontend_ctrl,
- .fe = { {
- .streaming_ctrl = anysee_streaming_ctrl,
- .frontend_attach = anysee_frontend_attach,
- .tuner_attach = anysee_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
@@ -1350,56 +1317,32 @@
.buffersize = (16*512),
}
}
- },
- }, {
- .streaming_ctrl = anysee_streaming_ctrl,
- .frontend_attach = anysee_frontend_attach,
- .tuner_attach = anysee_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 8,
- .endpoint = 0x82,
- .u = {
- .bulk = {
- .buffersize = (16*512),
- }
- }
- },
- } },
+ }
}
- },
-
- .rc.core = {
- .rc_codes = RC_MAP_ANYSEE,
- .protocol = RC_TYPE_OTHER,
- .module_name = "anysee",
- .rc_query = anysee_rc_query,
- .rc_interval = 250, /* windows driver uses 500ms */
- },
-
- .i2c_algo = &anysee_i2c_algo,
-
- .generic_bulk_ctrl_endpoint = 1,
-
- .num_device_descs = 1,
- .devices = {
- {
- .name = "Anysee DVB USB2.0",
- .cold_ids = {NULL},
- .warm_ids = {&anysee_table[0],
- &anysee_table[1], NULL},
- },
}
};
-static struct usb_driver anysee_driver = {
- .name = "dvb_usb_anysee",
- .probe = anysee_probe,
- .disconnect = anysee_disconnect,
- .id_table = anysee_table,
+static const struct usb_device_id anysee_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE,
+ &anysee_props, "Anysee", RC_MAP_ANYSEE) },
+ { DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE,
+ &anysee_props, "Anysee", RC_MAP_ANYSEE) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, anysee_id_table);
+
+static struct usb_driver anysee_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = anysee_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
};
-module_usb_driver(anysee_driver);
+module_usb_driver(anysee_usb_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");