| /* | 
 |  * DVB USB library - provides a generic interface for a DVB USB device driver. | 
 |  * | 
 |  * dvb-usb-init.c | 
 |  * | 
 |  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) | 
 |  * | 
 |  *	This program is free software; you can redistribute it and/or modify it | 
 |  *	under the terms of the GNU General Public License as published by the Free | 
 |  *	Software Foundation, version 2. | 
 |  * | 
 |  * see Documentation/dvb/README.dvb-usb for more information | 
 |  */ | 
 | #include "dvb-usb-common.h" | 
 |  | 
 | /* debug */ | 
 | int dvb_usb_debug; | 
 | module_param_named(debug,dvb_usb_debug, int, 0644); | 
 | MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS); | 
 |  | 
 | int dvb_usb_disable_rc_polling; | 
 | module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); | 
 | MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); | 
 |  | 
 | static int dvb_usb_force_pid_filter_usage; | 
 | module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); | 
 | MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); | 
 |  | 
 | static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) | 
 | { | 
 | 	struct dvb_usb_adapter *adap; | 
 | 	int ret,n; | 
 |  | 
 | 	for (n = 0; n < d->props.num_adapters; n++) { | 
 | 		adap = &d->adapter[n]; | 
 | 		adap->dev = d; | 
 | 		adap->id  = n; | 
 |  | 
 | 		memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties)); | 
 |  | 
 | /* speed - when running at FULL speed we need a HW PID filter */ | 
 | 		if (d->udev->speed == USB_SPEED_FULL && !(adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER)) { | 
 | 			err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); | 
 | 			return -ENODEV; | 
 | 		} | 
 |  | 
 | 		if ((d->udev->speed == USB_SPEED_FULL && adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) || | 
 | 			(adap->props.caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { | 
 | 			info("will use the device's hardware PID filter (table count: %d).",adap->props.pid_filter_count); | 
 | 			adap->pid_filtering  = 1; | 
 | 			adap->max_feed_count = adap->props.pid_filter_count; | 
 | 		} else { | 
 | 			info("will pass the complete MPEG2 transport stream to the software demuxer."); | 
 | 			adap->pid_filtering  = 0; | 
 | 			adap->max_feed_count = 255; | 
 | 		} | 
 |  | 
 | 		if (!adap->pid_filtering && | 
 | 			dvb_usb_force_pid_filter_usage && | 
 | 			adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) { | 
 | 			info("pid filter enabled by module option."); | 
 | 			adap->pid_filtering  = 1; | 
 | 			adap->max_feed_count = adap->props.pid_filter_count; | 
 | 		} | 
 |  | 
 | 		if (adap->props.size_of_priv > 0) { | 
 | 			adap->priv = kzalloc(adap->props.size_of_priv,GFP_KERNEL); | 
 | 			if (adap->priv == NULL) { | 
 | 				err("no memory for priv for adapter %d.",n); | 
 | 				return -ENOMEM; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if ((ret = dvb_usb_adapter_stream_init(adap)) || | 
 | 			(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || | 
 | 			(ret = dvb_usb_adapter_frontend_init(adap))) { | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		d->num_adapters_initialized++; | 
 | 		d->state |= DVB_USB_STATE_DVB; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * when reloading the driver w/o replugging the device | 
 | 	 * sometimes a timeout occures, this helps | 
 | 	 */ | 
 | 	if (d->props.generic_bulk_ctrl_endpoint != 0) { | 
 | 		usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); | 
 | 		usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dvb_usb_adapter_exit(struct dvb_usb_device *d) | 
 | { | 
 | 	int n; | 
 | 	for (n = 0; n < d->num_adapters_initialized; n++) { | 
 | 		dvb_usb_adapter_frontend_exit(&d->adapter[n]); | 
 | 		dvb_usb_adapter_dvb_exit(&d->adapter[n]); | 
 | 		dvb_usb_adapter_stream_exit(&d->adapter[n]); | 
 | 		kfree(d->adapter[n].priv); | 
 | 	} | 
 | 	d->num_adapters_initialized = 0; | 
 | 	d->state &= ~DVB_USB_STATE_DVB; | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* general initialization functions */ | 
 | static int dvb_usb_exit(struct dvb_usb_device *d) | 
 | { | 
 | 	deb_info("state before exiting everything: %x\n",d->state); | 
 | 	dvb_usb_remote_exit(d); | 
 | 	dvb_usb_adapter_exit(d); | 
 | 	dvb_usb_i2c_exit(d); | 
 | 	deb_info("state should be zero now: %x\n",d->state); | 
 | 	d->state = DVB_USB_STATE_INIT; | 
 | 	kfree(d->priv); | 
 | 	kfree(d); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	mutex_init(&d->usb_mutex); | 
 | 	mutex_init(&d->i2c_mutex); | 
 |  | 
 | 	d->state = DVB_USB_STATE_INIT; | 
 |  | 
 | 	if (d->props.size_of_priv > 0) { | 
 | 		d->priv = kzalloc(d->props.size_of_priv,GFP_KERNEL); | 
 | 		if (d->priv == NULL) { | 
 | 			err("no memory for priv in 'struct dvb_usb_device'"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | /* check the capabilities and set appropriate variables */ | 
 | 	dvb_usb_device_power_ctrl(d, 1); | 
 |  | 
 | 	if ((ret = dvb_usb_i2c_init(d)) || | 
 | 		(ret = dvb_usb_adapter_init(d, adapter_nums))) { | 
 | 		dvb_usb_exit(d); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if ((ret = dvb_usb_remote_init(d))) | 
 | 		err("could not initialize remote control."); | 
 |  | 
 | 	dvb_usb_device_power_ctrl(d, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* determine the name and the state of the just found USB device */ | 
 | static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_device_properties *props, int *cold) | 
 | { | 
 | 	int i,j; | 
 | 	struct dvb_usb_device_description *desc = NULL; | 
 | 	*cold = -1; | 
 |  | 
 | 	for (i = 0; i < props->num_device_descs; i++) { | 
 |  | 
 | 		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { | 
 | 			deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); | 
 | 			if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) && | 
 | 				props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { | 
 | 				*cold = 1; | 
 | 				desc = &props->devices[i]; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (desc != NULL) | 
 | 			break; | 
 |  | 
 | 		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { | 
 | 			deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); | 
 | 			if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && | 
 | 				props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { | 
 | 				*cold = 0; | 
 | 				desc = &props->devices[i]; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (desc != NULL && props->identify_state != NULL) | 
 | 		props->identify_state(udev,props,&desc,cold); | 
 |  | 
 | 	return desc; | 
 | } | 
 |  | 
 | int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) | 
 | { | 
 | 	if (onoff) | 
 | 		d->powered++; | 
 | 	else | 
 | 		d->powered--; | 
 |  | 
 | 	if (d->powered == 0 || (onoff && d->powered == 1)) { // when switching from 1 to 0 or from 0 to 1 | 
 | 		deb_info("power control: %d\n", onoff); | 
 | 		if (d->props.power_ctrl) | 
 | 			return d->props.power_ctrl(d, onoff); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * USB | 
 |  */ | 
 | int dvb_usb_device_init(struct usb_interface *intf, | 
 | 			struct dvb_usb_device_properties *props, | 
 | 			struct module *owner, struct dvb_usb_device **du, | 
 | 			short *adapter_nums) | 
 | { | 
 | 	struct usb_device *udev = interface_to_usbdev(intf); | 
 | 	struct dvb_usb_device *d = NULL; | 
 | 	struct dvb_usb_device_description *desc = NULL; | 
 |  | 
 | 	int ret = -ENOMEM,cold=0; | 
 |  | 
 | 	if (du != NULL) | 
 | 		*du = NULL; | 
 |  | 
 | 	if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) { | 
 | 		deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (cold) { | 
 | 		info("found a '%s' in cold state, will try to load a firmware",desc->name); | 
 | 		ret = dvb_usb_download_firmware(udev,props); | 
 | 		if (!props->no_reconnect || ret != 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	info("found a '%s' in warm state.",desc->name); | 
 | 		d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); | 
 | 	if (d == NULL) { | 
 | 		err("no memory for 'struct dvb_usb_device'"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	d->udev = udev; | 
 | 	memcpy(&d->props,props,sizeof(struct dvb_usb_device_properties)); | 
 | 	d->desc = desc; | 
 | 	d->owner = owner; | 
 |  | 
 | 	usb_set_intfdata(intf, d); | 
 |  | 
 | 	if (du != NULL) | 
 | 		*du = d; | 
 |  | 
 | 	ret = dvb_usb_init(d, adapter_nums); | 
 |  | 
 | 	if (ret == 0) | 
 | 		info("%s successfully initialized and connected.",desc->name); | 
 | 	else | 
 | 		info("%s error while loading driver (%d)",desc->name,ret); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(dvb_usb_device_init); | 
 |  | 
 | void dvb_usb_device_exit(struct usb_interface *intf) | 
 | { | 
 | 	struct dvb_usb_device *d = usb_get_intfdata(intf); | 
 | 	const char *name = "generic DVB-USB module"; | 
 |  | 
 | 	usb_set_intfdata(intf,NULL); | 
 | 	if (d != NULL && d->desc != NULL) { | 
 | 		name = d->desc->name; | 
 | 		dvb_usb_exit(d); | 
 | 	} | 
 | 	info("%s successfully deinitialized and disconnected.",name); | 
 |  | 
 | } | 
 | EXPORT_SYMBOL(dvb_usb_device_exit); | 
 |  | 
 | MODULE_VERSION("1.0"); | 
 | MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); | 
 | MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); | 
 | MODULE_LICENSE("GPL"); |