| /* | 
 |  * extcon-arizona.c - Extcon driver Wolfson Arizona devices | 
 |  * | 
 |  *  Copyright (C) 2012 Wolfson Microelectronics plc | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/err.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/extcon.h> | 
 |  | 
 | #include <linux/mfd/arizona/core.h> | 
 | #include <linux/mfd/arizona/pdata.h> | 
 | #include <linux/mfd/arizona/registers.h> | 
 |  | 
 | struct arizona_extcon_info { | 
 | 	struct device *dev; | 
 | 	struct arizona *arizona; | 
 | 	struct mutex lock; | 
 | 	struct regulator *micvdd; | 
 |  | 
 | 	int micd_mode; | 
 | 	const struct arizona_micd_config *micd_modes; | 
 | 	int micd_num_modes; | 
 |  | 
 | 	bool micd_reva; | 
 |  | 
 | 	bool mic; | 
 | 	bool detecting; | 
 | 	int jack_flips; | 
 |  | 
 | 	struct extcon_dev edev; | 
 | }; | 
 |  | 
 | static const struct arizona_micd_config micd_default_modes[] = { | 
 | 	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, | 
 | 	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, | 
 | }; | 
 |  | 
 | #define ARIZONA_CABLE_MECHANICAL 0 | 
 | #define ARIZONA_CABLE_MICROPHONE 1 | 
 | #define ARIZONA_CABLE_HEADPHONE  2 | 
 |  | 
 | static const char *arizona_cable[] = { | 
 | 	"Mechanical", | 
 | 	"Microphone", | 
 | 	"Headphone", | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) | 
 | { | 
 | 	struct arizona *arizona = info->arizona; | 
 |  | 
 | 	gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, | 
 | 				info->micd_modes[mode].gpio); | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
 | 			   ARIZONA_MICD_BIAS_SRC_MASK, | 
 | 			   info->micd_modes[mode].bias); | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, | 
 | 			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); | 
 |  | 
 | 	info->micd_mode = mode; | 
 |  | 
 | 	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); | 
 | } | 
 |  | 
 | static void arizona_start_mic(struct arizona_extcon_info *info) | 
 | { | 
 | 	struct arizona *arizona = info->arizona; | 
 | 	bool change; | 
 | 	int ret; | 
 |  | 
 | 	info->detecting = true; | 
 | 	info->mic = false; | 
 | 	info->jack_flips = 0; | 
 |  | 
 | 	/* Microphone detection can't use idle mode */ | 
 | 	pm_runtime_get(info->dev); | 
 |  | 
 | 	ret = regulator_enable(info->micvdd); | 
 | 	if (ret != 0) { | 
 | 		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", | 
 | 			ret); | 
 | 	} | 
 |  | 
 | 	if (info->micd_reva) { | 
 | 		regmap_write(arizona->regmap, 0x80, 0x3); | 
 | 		regmap_write(arizona->regmap, 0x294, 0); | 
 | 		regmap_write(arizona->regmap, 0x80, 0x0); | 
 | 	} | 
 |  | 
 | 	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
 | 				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, | 
 | 				 &change); | 
 | 	if (!change) { | 
 | 		regulator_disable(info->micvdd); | 
 | 		pm_runtime_put_autosuspend(info->dev); | 
 | 	} | 
 | } | 
 |  | 
 | static void arizona_stop_mic(struct arizona_extcon_info *info) | 
 | { | 
 | 	struct arizona *arizona = info->arizona; | 
 | 	bool change; | 
 |  | 
 | 	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
 | 				 ARIZONA_MICD_ENA, 0, | 
 | 				 &change); | 
 |  | 
 | 	if (info->micd_reva) { | 
 | 		regmap_write(arizona->regmap, 0x80, 0x3); | 
 | 		regmap_write(arizona->regmap, 0x294, 2); | 
 | 		regmap_write(arizona->regmap, 0x80, 0x0); | 
 | 	} | 
 |  | 
 | 	if (change) { | 
 | 		regulator_disable(info->micvdd); | 
 | 		pm_runtime_put_autosuspend(info->dev); | 
 | 	} | 
 | } | 
 |  | 
 | static irqreturn_t arizona_micdet(int irq, void *data) | 
 | { | 
 | 	struct arizona_extcon_info *info = data; | 
 | 	struct arizona *arizona = info->arizona; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&info->lock); | 
 |  | 
 | 	ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); | 
 | 	if (ret != 0) { | 
 | 		dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	dev_dbg(arizona->dev, "MICDET: %x\n", val); | 
 |  | 
 | 	if (!(val & ARIZONA_MICD_VALID)) { | 
 | 		dev_warn(arizona->dev, "Microphone detection state invalid\n"); | 
 | 		mutex_unlock(&info->lock); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	/* Due to jack detect this should never happen */ | 
 | 	if (!(val & ARIZONA_MICD_STS)) { | 
 | 		dev_warn(arizona->dev, "Detected open circuit\n"); | 
 | 		info->detecting = false; | 
 | 		goto handled; | 
 | 	} | 
 |  | 
 | 	/* If we got a high impedence we should have a headset, report it. */ | 
 | 	if (info->detecting && (val & 0x400)) { | 
 | 		ret = extcon_update_state(&info->edev, | 
 | 					  1 << ARIZONA_CABLE_MICROPHONE | | 
 | 					  1 << ARIZONA_CABLE_HEADPHONE, | 
 | 					  1 << ARIZONA_CABLE_MICROPHONE | | 
 | 					  1 << ARIZONA_CABLE_HEADPHONE); | 
 |  | 
 | 		if (ret != 0) | 
 | 			dev_err(arizona->dev, "Headset report failed: %d\n", | 
 | 				ret); | 
 |  | 
 | 		info->mic = true; | 
 | 		info->detecting = false; | 
 | 		goto handled; | 
 | 	} | 
 |  | 
 | 	/* If we detected a lower impedence during initial startup | 
 | 	 * then we probably have the wrong polarity, flip it.  Don't | 
 | 	 * do this for the lowest impedences to speed up detection of | 
 | 	 * plain headphones.  If both polarities report a low | 
 | 	 * impedence then give up and report headphones. | 
 | 	 */ | 
 | 	if (info->detecting && (val & 0x3f8)) { | 
 | 		info->jack_flips++; | 
 |  | 
 | 		if (info->jack_flips >= info->micd_num_modes) { | 
 | 			dev_dbg(arizona->dev, "Detected headphone\n"); | 
 | 			info->detecting = false; | 
 | 			arizona_stop_mic(info); | 
 |  | 
 | 			ret = extcon_set_cable_state_(&info->edev, | 
 | 						      ARIZONA_CABLE_HEADPHONE, | 
 | 						      true); | 
 | 			if (ret != 0) | 
 | 				dev_err(arizona->dev, | 
 | 					"Headphone report failed: %d\n", | 
 | 				ret); | 
 | 		} else { | 
 | 			info->micd_mode++; | 
 | 			if (info->micd_mode == info->micd_num_modes) | 
 | 				info->micd_mode = 0; | 
 | 			arizona_extcon_set_mode(info, info->micd_mode); | 
 |  | 
 | 			info->jack_flips++; | 
 | 		} | 
 |  | 
 | 		goto handled; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If we're still detecting and we detect a short then we've | 
 | 	 * got a headphone.  Otherwise it's a button press, the | 
 | 	 * button reporting is stubbed out for now. | 
 | 	 */ | 
 | 	if (val & 0x3fc) { | 
 | 		if (info->mic) { | 
 | 			dev_dbg(arizona->dev, "Mic button detected\n"); | 
 |  | 
 | 		} else if (info->detecting) { | 
 | 			dev_dbg(arizona->dev, "Headphone detected\n"); | 
 | 			info->detecting = false; | 
 | 			arizona_stop_mic(info); | 
 |  | 
 | 			ret = extcon_set_cable_state_(&info->edev, | 
 | 						      ARIZONA_CABLE_HEADPHONE, | 
 | 						      true); | 
 | 			if (ret != 0) | 
 | 				dev_err(arizona->dev, | 
 | 					"Headphone report failed: %d\n", | 
 | 				ret); | 
 | 		} else { | 
 | 			dev_warn(arizona->dev, "Button with no mic: %x\n", | 
 | 				 val); | 
 | 		} | 
 | 	} else { | 
 | 		dev_dbg(arizona->dev, "Mic button released\n"); | 
 | 	} | 
 |  | 
 | handled: | 
 | 	pm_runtime_mark_last_busy(info->dev); | 
 | 	mutex_unlock(&info->lock); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t arizona_jackdet(int irq, void *data) | 
 | { | 
 | 	struct arizona_extcon_info *info = data; | 
 | 	struct arizona *arizona = info->arizona; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	pm_runtime_get_sync(info->dev); | 
 |  | 
 | 	mutex_lock(&info->lock); | 
 |  | 
 | 	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); | 
 | 	if (ret != 0) { | 
 | 		dev_err(arizona->dev, "Failed to read jackdet status: %d\n", | 
 | 			ret); | 
 | 		mutex_unlock(&info->lock); | 
 | 		pm_runtime_put_autosuspend(info->dev); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	if (val & ARIZONA_JD1_STS) { | 
 | 		dev_dbg(arizona->dev, "Detected jack\n"); | 
 | 		ret = extcon_set_cable_state_(&info->edev, | 
 | 					      ARIZONA_CABLE_MECHANICAL, true); | 
 |  | 
 | 		if (ret != 0) | 
 | 			dev_err(arizona->dev, "Mechanical report failed: %d\n", | 
 | 				ret); | 
 |  | 
 | 		arizona_start_mic(info); | 
 | 	} else { | 
 | 		dev_dbg(arizona->dev, "Detected jack removal\n"); | 
 |  | 
 | 		arizona_stop_mic(info); | 
 |  | 
 | 		ret = extcon_update_state(&info->edev, 0xffffffff, 0); | 
 | 		if (ret != 0) | 
 | 			dev_err(arizona->dev, "Removal report failed: %d\n", | 
 | 				ret); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&info->lock); | 
 |  | 
 | 	pm_runtime_mark_last_busy(info->dev); | 
 | 	pm_runtime_put_autosuspend(info->dev); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int __devinit arizona_extcon_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); | 
 | 	struct arizona_pdata *pdata; | 
 | 	struct arizona_extcon_info *info; | 
 | 	int ret, mode; | 
 |  | 
 | 	pdata = dev_get_platdata(arizona->dev); | 
 |  | 
 | 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | 
 | 	if (!info) { | 
 | 		dev_err(&pdev->dev, "failed to allocate memory\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); | 
 | 	if (IS_ERR(info->micvdd)) { | 
 | 		ret = PTR_ERR(info->micvdd); | 
 | 		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	mutex_init(&info->lock); | 
 | 	info->arizona = arizona; | 
 | 	info->dev = &pdev->dev; | 
 | 	info->detecting = true; | 
 | 	platform_set_drvdata(pdev, info); | 
 |  | 
 | 	switch (arizona->type) { | 
 | 	case WM5102: | 
 | 		switch (arizona->rev) { | 
 | 		case 0: | 
 | 			info->micd_reva = true; | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	info->edev.name = "Headset Jack"; | 
 | 	info->edev.supported_cable = arizona_cable; | 
 |  | 
 | 	ret = extcon_dev_register(&info->edev, arizona->dev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(arizona->dev, "extcon_dev_regster() failed: %d\n", | 
 | 			ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	if (pdata->num_micd_configs) { | 
 | 		info->micd_modes = pdata->micd_configs; | 
 | 		info->micd_num_modes = pdata->num_micd_configs; | 
 | 	} else { | 
 | 		info->micd_modes = micd_default_modes; | 
 | 		info->micd_num_modes = ARRAY_SIZE(micd_default_modes); | 
 | 	} | 
 |  | 
 | 	if (arizona->pdata.micd_pol_gpio > 0) { | 
 | 		if (info->micd_modes[0].gpio) | 
 | 			mode = GPIOF_OUT_INIT_HIGH; | 
 | 		else | 
 | 			mode = GPIOF_OUT_INIT_LOW; | 
 |  | 
 | 		ret = devm_gpio_request_one(&pdev->dev, | 
 | 					    arizona->pdata.micd_pol_gpio, | 
 | 					    mode, | 
 | 					    "MICD polarity"); | 
 | 		if (ret != 0) { | 
 | 			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", | 
 | 				arizona->pdata.micd_pol_gpio, ret); | 
 | 			goto err_register; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	arizona_extcon_set_mode(info, 0); | 
 |  | 
 | 	pm_runtime_enable(&pdev->dev); | 
 | 	pm_runtime_idle(&pdev->dev); | 
 | 	pm_runtime_get_sync(&pdev->dev); | 
 |  | 
 | 	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE, | 
 | 				  "JACKDET rise", arizona_jackdet, info); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", | 
 | 			ret); | 
 | 		goto err_register; | 
 | 	} | 
 |  | 
 | 	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", | 
 | 			ret); | 
 | 		goto err_rise; | 
 | 	} | 
 |  | 
 | 	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL, | 
 | 				  "JACKDET fall", arizona_jackdet, info); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); | 
 | 		goto err_rise_wake; | 
 | 	} | 
 |  | 
 | 	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", | 
 | 			ret); | 
 | 		goto err_fall; | 
 | 	} | 
 |  | 
 | 	ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, | 
 | 				  "MICDET", arizona_micdet, info); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); | 
 | 		goto err_fall_wake; | 
 | 	} | 
 |  | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
 | 			   ARIZONA_MICD_BIAS_STARTTIME_MASK | | 
 | 			   ARIZONA_MICD_RATE_MASK, | 
 | 			   7 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT | | 
 | 			   8 << ARIZONA_MICD_RATE_SHIFT); | 
 |  | 
 | 	arizona_clk32k_enable(arizona); | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, | 
 | 			   ARIZONA_JD1_DB, ARIZONA_JD1_DB); | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, | 
 | 			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); | 
 |  | 
 | 	pm_runtime_put(&pdev->dev); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_fall_wake: | 
 | 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); | 
 | err_fall: | 
 | 	arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); | 
 | err_rise_wake: | 
 | 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); | 
 | err_rise: | 
 | 	arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); | 
 | err_register: | 
 | 	pm_runtime_disable(&pdev->dev); | 
 | 	extcon_dev_unregister(&info->edev); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit arizona_extcon_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct arizona_extcon_info *info = platform_get_drvdata(pdev); | 
 | 	struct arizona *arizona = info->arizona; | 
 |  | 
 | 	pm_runtime_disable(&pdev->dev); | 
 |  | 
 | 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); | 
 | 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); | 
 | 	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); | 
 | 	arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); | 
 | 	arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); | 
 | 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, | 
 | 			   ARIZONA_JD1_ENA, 0); | 
 | 	arizona_clk32k_disable(arizona); | 
 | 	extcon_dev_unregister(&info->edev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver arizona_extcon_driver = { | 
 | 	.driver		= { | 
 | 		.name	= "arizona-extcon", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | 	.probe		= arizona_extcon_probe, | 
 | 	.remove		= __devexit_p(arizona_extcon_remove), | 
 | }; | 
 |  | 
 | module_platform_driver(arizona_extcon_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Arizona Extcon driver"); | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:extcon-arizona"); |