|  | /* | 
|  | * LCD panel driver for TPO TD043MTEA1 | 
|  | * | 
|  | * Author: Gražvydas Ignotas <notasas@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <video/omapdss.h> | 
|  |  | 
|  | #define TPO_R02_MODE(x)		((x) & 7) | 
|  | #define TPO_R02_MODE_800x480	7 | 
|  | #define TPO_R02_NCLK_RISING	BIT(3) | 
|  | #define TPO_R02_HSYNC_HIGH	BIT(4) | 
|  | #define TPO_R02_VSYNC_HIGH	BIT(5) | 
|  |  | 
|  | #define TPO_R03_NSTANDBY	BIT(0) | 
|  | #define TPO_R03_EN_CP_CLK	BIT(1) | 
|  | #define TPO_R03_EN_VGL_PUMP	BIT(2) | 
|  | #define TPO_R03_EN_PWM		BIT(3) | 
|  | #define TPO_R03_DRIVING_CAP_100	BIT(4) | 
|  | #define TPO_R03_EN_PRE_CHARGE	BIT(6) | 
|  | #define TPO_R03_SOFTWARE_CTL	BIT(7) | 
|  |  | 
|  | #define TPO_R04_NFLIP_H		BIT(0) | 
|  | #define TPO_R04_NFLIP_V		BIT(1) | 
|  | #define TPO_R04_CP_CLK_FREQ_1H	BIT(2) | 
|  | #define TPO_R04_VGL_FREQ_1H	BIT(4) | 
|  |  | 
|  | #define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \ | 
|  | TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \ | 
|  | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ | 
|  | TPO_R03_SOFTWARE_CTL) | 
|  |  | 
|  | #define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \ | 
|  | TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) | 
|  |  | 
|  | static const u16 tpo_td043_def_gamma[12] = { | 
|  | 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023 | 
|  | }; | 
|  |  | 
|  | struct tpo_td043_device { | 
|  | struct spi_device *spi; | 
|  | struct regulator *vcc_reg; | 
|  | int nreset_gpio; | 
|  | u16 gamma[12]; | 
|  | u32 mode; | 
|  | u32 hmirror:1; | 
|  | u32 vmirror:1; | 
|  | u32 powered_on:1; | 
|  | u32 spi_suspended:1; | 
|  | u32 power_on_resume:1; | 
|  | }; | 
|  |  | 
|  | static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) | 
|  | { | 
|  | struct spi_message	m; | 
|  | struct spi_transfer	xfer; | 
|  | u16			w; | 
|  | int			r; | 
|  |  | 
|  | spi_message_init(&m); | 
|  |  | 
|  | memset(&xfer, 0, sizeof(xfer)); | 
|  |  | 
|  | w = ((u16)addr << 10) | (1 << 8) | data; | 
|  | xfer.tx_buf = &w; | 
|  | xfer.bits_per_word = 16; | 
|  | xfer.len = 2; | 
|  | spi_message_add_tail(&xfer, &m); | 
|  |  | 
|  | r = spi_sync(spi, &m); | 
|  | if (r < 0) | 
|  | dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12]) | 
|  | { | 
|  | u8 i, val; | 
|  |  | 
|  | /* gamma bits [9:8] */ | 
|  | for (val = i = 0; i < 4; i++) | 
|  | val |= (gamma[i] & 0x300) >> ((i + 1) * 2); | 
|  | tpo_td043_write(spi, 0x11, val); | 
|  |  | 
|  | for (val = i = 0; i < 4; i++) | 
|  | val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2); | 
|  | tpo_td043_write(spi, 0x12, val); | 
|  |  | 
|  | for (val = i = 0; i < 4; i++) | 
|  | val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2); | 
|  | tpo_td043_write(spi, 0x13, val); | 
|  |  | 
|  | /* gamma bits [7:0] */ | 
|  | for (val = i = 0; i < 12; i++) | 
|  | tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff); | 
|  | } | 
|  |  | 
|  | static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v) | 
|  | { | 
|  | u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \ | 
|  | TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; | 
|  | if (h) | 
|  | reg4 &= ~TPO_R04_NFLIP_H; | 
|  | if (v) | 
|  | reg4 &= ~TPO_R04_NFLIP_V; | 
|  |  | 
|  | return tpo_td043_write(spi, 4, reg4); | 
|  | } | 
|  |  | 
|  | static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  |  | 
|  | tpo_td043->hmirror = enable; | 
|  | return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, | 
|  | tpo_td043->vmirror); | 
|  | } | 
|  |  | 
|  | static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  |  | 
|  | return tpo_td043->hmirror; | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_vmirror_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror); | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_vmirror_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  | int val; | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtoint(buf, 0, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = !!val; | 
|  |  | 
|  | ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | tpo_td043->vmirror = val; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_mode_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode); | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_mode_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  | long val; | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtol(buf, 0, &val); | 
|  | if (ret != 0 || val & ~7) | 
|  | return -EINVAL; | 
|  |  | 
|  | tpo_td043->mode = val; | 
|  |  | 
|  | val |= TPO_R02_NCLK_RISING; | 
|  | tpo_td043_write(tpo_td043->spi, 2, val); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_gamma_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  | ssize_t len = 0; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) { | 
|  | ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", | 
|  | tpo_td043->gamma[i]); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | len += ret; | 
|  | } | 
|  | buf[len - 1] = '\n'; | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t tpo_td043_gamma_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  | unsigned int g[12]; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", | 
|  | &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], | 
|  | &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); | 
|  |  | 
|  | if (ret != 12) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < 12; i++) | 
|  | tpo_td043->gamma[i] = g[i]; | 
|  |  | 
|  | tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR, | 
|  | tpo_td043_vmirror_show, tpo_td043_vmirror_store); | 
|  | static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, | 
|  | tpo_td043_mode_show, tpo_td043_mode_store); | 
|  | static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR, | 
|  | tpo_td043_gamma_show, tpo_td043_gamma_store); | 
|  |  | 
|  | static struct attribute *tpo_td043_attrs[] = { | 
|  | &dev_attr_vmirror.attr, | 
|  | &dev_attr_mode.attr, | 
|  | &dev_attr_gamma.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group tpo_td043_attr_group = { | 
|  | .attrs = tpo_td043_attrs, | 
|  | }; | 
|  |  | 
|  | static const struct omap_video_timings tpo_td043_timings = { | 
|  | .x_res		= 800, | 
|  | .y_res		= 480, | 
|  |  | 
|  | .pixel_clock	= 36000, | 
|  |  | 
|  | .hsw		= 1, | 
|  | .hfp		= 68, | 
|  | .hbp		= 214, | 
|  |  | 
|  | .vsw		= 1, | 
|  | .vfp		= 39, | 
|  | .vbp		= 34, | 
|  |  | 
|  | .vsync_level	= OMAPDSS_SIG_ACTIVE_LOW, | 
|  | .hsync_level	= OMAPDSS_SIG_ACTIVE_LOW, | 
|  | .data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE, | 
|  | .de_level	= OMAPDSS_SIG_ACTIVE_HIGH, | 
|  | .sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, | 
|  | }; | 
|  |  | 
|  | static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043) | 
|  | { | 
|  | int nreset_gpio = tpo_td043->nreset_gpio; | 
|  | int r; | 
|  |  | 
|  | if (tpo_td043->powered_on) | 
|  | return 0; | 
|  |  | 
|  | r = regulator_enable(tpo_td043->vcc_reg); | 
|  | if (r != 0) | 
|  | return r; | 
|  |  | 
|  | /* wait for panel to stabilize */ | 
|  | msleep(160); | 
|  |  | 
|  | if (gpio_is_valid(nreset_gpio)) | 
|  | gpio_set_value(nreset_gpio, 1); | 
|  |  | 
|  | tpo_td043_write(tpo_td043->spi, 2, | 
|  | TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING); | 
|  | tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL); | 
|  | tpo_td043_write(tpo_td043->spi, 0x20, 0xf0); | 
|  | tpo_td043_write(tpo_td043->spi, 0x21, 0xf0); | 
|  | tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, | 
|  | tpo_td043->vmirror); | 
|  | tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); | 
|  |  | 
|  | tpo_td043->powered_on = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043) | 
|  | { | 
|  | int nreset_gpio = tpo_td043->nreset_gpio; | 
|  |  | 
|  | if (!tpo_td043->powered_on) | 
|  | return; | 
|  |  | 
|  | tpo_td043_write(tpo_td043->spi, 3, | 
|  | TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); | 
|  |  | 
|  | if (gpio_is_valid(nreset_gpio)) | 
|  | gpio_set_value(nreset_gpio, 0); | 
|  |  | 
|  | /* wait for at least 2 vsyncs before cutting off power */ | 
|  | msleep(50); | 
|  |  | 
|  | tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY); | 
|  |  | 
|  | regulator_disable(tpo_td043->vcc_reg); | 
|  |  | 
|  | tpo_td043->powered_on = 0; | 
|  | } | 
|  |  | 
|  | static int tpo_td043_enable_dss(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  | int r; | 
|  |  | 
|  | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) | 
|  | return 0; | 
|  |  | 
|  | r = omapdss_dpi_display_enable(dssdev); | 
|  | if (r) | 
|  | goto err0; | 
|  |  | 
|  | if (dssdev->platform_enable) { | 
|  | r = dssdev->platform_enable(dssdev); | 
|  | if (r) | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we are resuming from system suspend, SPI clocks might not be | 
|  | * enabled yet, so we'll program the LCD from SPI PM resume callback. | 
|  | */ | 
|  | if (!tpo_td043->spi_suspended) { | 
|  | r = tpo_td043_power_on(tpo_td043); | 
|  | if (r) | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | 
|  |  | 
|  | return 0; | 
|  | err1: | 
|  | omapdss_dpi_display_disable(dssdev); | 
|  | err0: | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void tpo_td043_disable_dss(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  |  | 
|  | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | 
|  | return; | 
|  |  | 
|  | if (dssdev->platform_disable) | 
|  | dssdev->platform_disable(dssdev); | 
|  |  | 
|  | omapdss_dpi_display_disable(dssdev); | 
|  |  | 
|  | if (!tpo_td043->spi_suspended) | 
|  | tpo_td043_power_off(tpo_td043); | 
|  | } | 
|  |  | 
|  | static int tpo_td043_enable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | dev_dbg(&dssdev->dev, "enable\n"); | 
|  |  | 
|  | return tpo_td043_enable_dss(dssdev); | 
|  | } | 
|  |  | 
|  | static void tpo_td043_disable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | dev_dbg(&dssdev->dev, "disable\n"); | 
|  |  | 
|  | tpo_td043_disable_dss(dssdev); | 
|  |  | 
|  | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | 
|  | } | 
|  |  | 
|  | static int tpo_td043_suspend(struct omap_dss_device *dssdev) | 
|  | { | 
|  | dev_dbg(&dssdev->dev, "suspend\n"); | 
|  |  | 
|  | tpo_td043_disable_dss(dssdev); | 
|  |  | 
|  | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tpo_td043_resume(struct omap_dss_device *dssdev) | 
|  | { | 
|  | dev_dbg(&dssdev->dev, "resume\n"); | 
|  |  | 
|  | return tpo_td043_enable_dss(dssdev); | 
|  | } | 
|  |  | 
|  | static int tpo_td043_probe(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  | int nreset_gpio = dssdev->reset_gpio; | 
|  | int ret = 0; | 
|  |  | 
|  | dev_dbg(&dssdev->dev, "probe\n"); | 
|  |  | 
|  | if (tpo_td043 == NULL) { | 
|  | dev_err(&dssdev->dev, "missing tpo_td043_device\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | dssdev->panel.timings = tpo_td043_timings; | 
|  | dssdev->ctrl.pixel_size = 24; | 
|  |  | 
|  | tpo_td043->mode = TPO_R02_MODE_800x480; | 
|  | memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma)); | 
|  |  | 
|  | tpo_td043->vcc_reg = regulator_get(&dssdev->dev, "vcc"); | 
|  | if (IS_ERR(tpo_td043->vcc_reg)) { | 
|  | dev_err(&dssdev->dev, "failed to get LCD VCC regulator\n"); | 
|  | ret = PTR_ERR(tpo_td043->vcc_reg); | 
|  | goto fail_regulator; | 
|  | } | 
|  |  | 
|  | if (gpio_is_valid(nreset_gpio)) { | 
|  | ret = gpio_request_one(nreset_gpio, GPIOF_OUT_INIT_LOW, | 
|  | "lcd reset"); | 
|  | if (ret < 0) { | 
|  | dev_err(&dssdev->dev, "couldn't request reset GPIO\n"); | 
|  | goto fail_gpio_req; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group); | 
|  | if (ret) | 
|  | dev_warn(&dssdev->dev, "failed to create sysfs files\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_gpio_req: | 
|  | regulator_put(tpo_td043->vcc_reg); | 
|  | fail_regulator: | 
|  | kfree(tpo_td043); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void tpo_td043_remove(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); | 
|  | int nreset_gpio = dssdev->reset_gpio; | 
|  |  | 
|  | dev_dbg(&dssdev->dev, "remove\n"); | 
|  |  | 
|  | sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group); | 
|  | regulator_put(tpo_td043->vcc_reg); | 
|  | if (gpio_is_valid(nreset_gpio)) | 
|  | gpio_free(nreset_gpio); | 
|  | } | 
|  |  | 
|  | static void tpo_td043_set_timings(struct omap_dss_device *dssdev, | 
|  | struct omap_video_timings *timings) | 
|  | { | 
|  | dpi_set_timings(dssdev, timings); | 
|  | } | 
|  |  | 
|  | static int tpo_td043_check_timings(struct omap_dss_device *dssdev, | 
|  | struct omap_video_timings *timings) | 
|  | { | 
|  | return dpi_check_timings(dssdev, timings); | 
|  | } | 
|  |  | 
|  | static struct omap_dss_driver tpo_td043_driver = { | 
|  | .probe		= tpo_td043_probe, | 
|  | .remove		= tpo_td043_remove, | 
|  |  | 
|  | .enable		= tpo_td043_enable, | 
|  | .disable	= tpo_td043_disable, | 
|  | .suspend	= tpo_td043_suspend, | 
|  | .resume		= tpo_td043_resume, | 
|  | .set_mirror	= tpo_td043_set_hmirror, | 
|  | .get_mirror	= tpo_td043_get_hmirror, | 
|  |  | 
|  | .set_timings	= tpo_td043_set_timings, | 
|  | .check_timings	= tpo_td043_check_timings, | 
|  |  | 
|  | .driver         = { | 
|  | .name	= "tpo_td043mtea1_panel", | 
|  | .owner  = THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int tpo_td043_spi_probe(struct spi_device *spi) | 
|  | { | 
|  | struct omap_dss_device *dssdev = spi->dev.platform_data; | 
|  | struct tpo_td043_device *tpo_td043; | 
|  | int ret; | 
|  |  | 
|  | if (dssdev == NULL) { | 
|  | dev_err(&spi->dev, "missing dssdev\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | spi->bits_per_word = 16; | 
|  | spi->mode = SPI_MODE_0; | 
|  |  | 
|  | ret = spi_setup(spi); | 
|  | if (ret < 0) { | 
|  | dev_err(&spi->dev, "spi_setup failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL); | 
|  | if (tpo_td043 == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | tpo_td043->spi = spi; | 
|  | tpo_td043->nreset_gpio = dssdev->reset_gpio; | 
|  | dev_set_drvdata(&spi->dev, tpo_td043); | 
|  | dev_set_drvdata(&dssdev->dev, tpo_td043); | 
|  |  | 
|  | omap_dss_register_driver(&tpo_td043_driver); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devexit tpo_td043_spi_remove(struct spi_device *spi) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev); | 
|  |  | 
|  | omap_dss_unregister_driver(&tpo_td043_driver); | 
|  | kfree(tpo_td043); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int tpo_td043_spi_suspend(struct device *dev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  |  | 
|  | dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", tpo_td043); | 
|  |  | 
|  | tpo_td043->power_on_resume = tpo_td043->powered_on; | 
|  | tpo_td043_power_off(tpo_td043); | 
|  | tpo_td043->spi_suspended = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tpo_td043_spi_resume(struct device *dev) | 
|  | { | 
|  | struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(dev, "tpo_td043_spi_resume\n"); | 
|  |  | 
|  | if (tpo_td043->power_on_resume) { | 
|  | ret = tpo_td043_power_on(tpo_td043); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | tpo_td043->spi_suspended = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm, | 
|  | tpo_td043_spi_suspend, tpo_td043_spi_resume); | 
|  |  | 
|  | static struct spi_driver tpo_td043_spi_driver = { | 
|  | .driver = { | 
|  | .name	= "tpo_td043mtea1_panel_spi", | 
|  | .owner	= THIS_MODULE, | 
|  | .pm	= &tpo_td043_spi_pm, | 
|  | }, | 
|  | .probe	= tpo_td043_spi_probe, | 
|  | .remove	= __devexit_p(tpo_td043_spi_remove), | 
|  | }; | 
|  |  | 
|  | module_spi_driver(tpo_td043_spi_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); | 
|  | MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); | 
|  | MODULE_LICENSE("GPL"); |