V4L/DVB (3267): Add support for the Avermedia 777 DVB-T card
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 1a536e86..45b5257 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -32,6 +32,7 @@
#include "saa7134-reg.h"
#include "saa7134.h"
#include <media/v4l2-common.h>
+#include "dvb-pll.h"
#ifdef HAVE_MT352
# include "mt352.h"
@@ -42,7 +43,6 @@
#endif
#ifdef HAVE_NXT200X
# include "nxt200x.h"
-# include "dvb-pll.h"
#endif
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -113,6 +113,24 @@
return 0;
}
+static int mt352_aver777_init(struct dvb_frontend* fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+ return 0;
+}
+
static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
@@ -142,6 +160,15 @@
return 0;
}
+static int mt352_aver777_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf)
+{
+ pllbuf[0] = 0xc2;
+ dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1,
+ params->frequency,
+ params->u.ofdm.bandwidth);
+ return 0;
+}
+
static struct mt352_config pinnacle_300i = {
.demod_address = 0x3c >> 1,
.adc_clock = 20333,
@@ -150,6 +177,12 @@
.demod_init = mt352_pinnacle_init,
.pll_set = mt352_pinnacle_pll_set,
};
+
+static struct mt352_config avermedia_777 = {
+ .demod_address = 0xf,
+ .demod_init = mt352_aver777_init,
+ .pll_set = mt352_aver777_pll_set,
+};
#endif
/* ------------------------------------------------------------------ */
@@ -847,6 +880,12 @@
dev->dvb.frontend = mt352_attach(&pinnacle_300i,
&dev->i2c_adap);
break;
+
+ case SAA7134_BOARD_AVERMEDIA_777:
+ printk("%s: avertv 777 dvb setup\n",dev->name);
+ dev->dvb.frontend = mt352_attach(&avermedia_777,
+ &dev->i2c_adap);
+ break;
#endif
#ifdef HAVE_TDA1004X
case SAA7134_BOARD_MD7134: