enic: Use (netdev|dev|pr)_<level> macro helpers for logging
Replace all printk routines with the (netdev|dev|pr)_<level> macros that
provide verbose logs.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index bebadb3..042f4b8 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -78,19 +78,19 @@
return -EINVAL;
if (bar->len < VNIC_MAX_RES_HDR_SIZE) {
- printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
+ pr_err("vNIC BAR0 res hdr length error\n");
return -EINVAL;
}
rh = bar->vaddr;
if (!rh) {
- printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n");
+ pr_err("vNIC BAR0 res hdr not mem-mapped\n");
return -EINVAL;
}
if (ioread32(&rh->magic) != VNIC_RES_MAGIC ||
ioread32(&rh->version) != VNIC_RES_VERSION) {
- printk(KERN_ERR "vNIC BAR0 res magic/version error "
+ pr_err("vNIC BAR0 res magic/version error "
"exp (%lx/%lx) curr (%x/%x)\n",
VNIC_RES_MAGIC, VNIC_RES_VERSION,
ioread32(&rh->magic), ioread32(&rh->version));
@@ -122,7 +122,7 @@
/* each count is stride bytes long */
len = count * VNIC_RES_STRIDE;
if (len + bar_offset > bar[bar_num].len) {
- printk(KERN_ERR "vNIC BAR0 resource %d "
+ pr_err("vNIC BAR0 resource %d "
"out-of-bounds, offset 0x%x + "
"size 0x%x > bar len 0x%lx\n",
type, bar_offset,
@@ -229,8 +229,7 @@
&ring->base_addr_unaligned);
if (!ring->descs_unaligned) {
- printk(KERN_ERR
- "Failed to allocate ring (size=%d), aborting\n",
+ pr_err("Failed to allocate ring (size=%d), aborting\n",
(int)ring->size);
return -ENOMEM;
}
@@ -268,7 +267,7 @@
status = ioread32(&devcmd->status);
if (status & STAT_BUSY) {
- printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd));
+ pr_err("Busy devcmd %d\n", _CMD_N(cmd));
return -EBUSY;
}
@@ -294,7 +293,7 @@
err = (int)readq(&devcmd->args[0]);
if (err != ERR_ECMDUNKNOWN ||
cmd != CMD_CAPABILITY)
- printk(KERN_ERR "Error %d devcmd %d\n",
+ pr_err("Error %d devcmd %d\n",
err, _CMD_N(cmd));
return err;
}
@@ -309,7 +308,7 @@
}
}
- printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd));
+ pr_err("Timedout devcmd %d\n", _CMD_N(cmd));
return -ETIMEDOUT;
}
@@ -565,7 +564,7 @@
err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait);
if (err)
- printk(KERN_ERR "Can't set packet filter\n");
+ pr_err("Can't set packet filter\n");
return err;
}
@@ -582,7 +581,7 @@
err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
if (err)
- printk(KERN_ERR "Can't add addr [%pM], %d\n", addr, err);
+ pr_err("Can't add addr [%pM], %d\n", addr, err);
return err;
}
@@ -599,7 +598,7 @@
err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
if (err)
- printk(KERN_ERR "Can't del addr [%pM], %d\n", addr, err);
+ pr_err("Can't del addr [%pM], %d\n", addr, err);
return err;
}
@@ -626,8 +625,7 @@
err = vnic_dev_cmd(vdev, CMD_IAR, &a0, &a1, wait);
if (err)
- printk(KERN_ERR "Failed to raise INTR[%d], err %d\n",
- intr, err);
+ pr_err("Failed to raise INTR[%d], err %d\n", intr, err);
return err;
}
@@ -658,8 +656,7 @@
dma_addr_t notify_pa;
if (vdev->notify || vdev->notify_pa) {
- printk(KERN_ERR "notify block %p still allocated",
- vdev->notify);
+ pr_err("notify block %p still allocated", vdev->notify);
return -EINVAL;
}