| /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */ | 
 | /* | 
 | 	Written 1998-2001 by Donald Becker. | 
 |  | 
 | 	Current Maintainer: Roger Luethi <rl@hellgate.ch> | 
 |  | 
 | 	This software may be used and distributed according to the terms of | 
 | 	the GNU General Public License (GPL), incorporated herein by reference. | 
 | 	Drivers based on or derived from this code fall under the GPL and must | 
 | 	retain the authorship, copyright and license notice.  This file is not | 
 | 	a complete program and may only be used when the entire operating | 
 | 	system is licensed under the GPL. | 
 |  | 
 | 	This driver is designed for the VIA VT86C100A Rhine-I. | 
 | 	It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM | 
 | 	and management NIC 6105M). | 
 |  | 
 | 	The author may be reached as becker@scyld.com, or C/O | 
 | 	Scyld Computing Corporation | 
 | 	410 Severn Ave., Suite 210 | 
 | 	Annapolis MD 21403 | 
 |  | 
 |  | 
 | 	This driver contains some changes from the original Donald Becker | 
 | 	version. He may or may not be interested in bug reports on this | 
 | 	code. You can find his versions at: | 
 | 	http://www.scyld.com/network/via-rhine.html | 
 | 	[link no longer provides useful info -jgarzik] | 
 |  | 
 | */ | 
 |  | 
 | #define DRV_NAME	"via-rhine" | 
 | #define DRV_VERSION	"1.4.3" | 
 | #define DRV_RELDATE	"2007-03-06" | 
 |  | 
 |  | 
 | /* A few user-configurable values. | 
 |    These may be modified when a driver module is loaded. */ | 
 |  | 
 | static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */ | 
 | static int max_interrupt_work = 20; | 
 |  | 
 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. | 
 |    Setting to > 1518 effectively disables this feature. */ | 
 | #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ | 
 |        || defined(CONFIG_SPARC) || defined(__ia64__) \ | 
 |        || defined(__sh__) || defined(__mips__) | 
 | static int rx_copybreak = 1518; | 
 | #else | 
 | static int rx_copybreak; | 
 | #endif | 
 |  | 
 | /* Work-around for broken BIOSes: they are unable to get the chip back out of | 
 |    power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ | 
 | static int avoid_D3; | 
 |  | 
 | /* | 
 |  * In case you are looking for 'options[]' or 'full_duplex[]', they | 
 |  * are gone. Use ethtool(8) instead. | 
 |  */ | 
 |  | 
 | /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). | 
 |    The Rhine has a 64 element 8390-like hash table. */ | 
 | static const int multicast_filter_limit = 32; | 
 |  | 
 |  | 
 | /* Operational parameters that are set at compile time. */ | 
 |  | 
 | /* Keep the ring sizes a power of two for compile efficiency. | 
 |    The compiler will convert <unsigned>'%'<2^N> into a bit mask. | 
 |    Making the Tx ring too large decreases the effectiveness of channel | 
 |    bonding and packet priority. | 
 |    There are no ill effects from too-large receive rings. */ | 
 | #define TX_RING_SIZE	16 | 
 | #define TX_QUEUE_LEN	10	/* Limit ring entries actually used. */ | 
 | #define RX_RING_SIZE	64 | 
 |  | 
 | /* Operational parameters that usually are not changed. */ | 
 |  | 
 | /* Time in jiffies before concluding the transmitter is hung. */ | 
 | #define TX_TIMEOUT	(2*HZ) | 
 |  | 
 | #define PKT_BUF_SZ	1536	/* Size of each temporary Rx buffer.*/ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/string.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/bitops.h> | 
 | #include <asm/processor.h>	/* Processor type for cache alignment. */ | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/uaccess.h> | 
 | #include <linux/dmi.h> | 
 |  | 
 | /* These identify the driver base version and may not be removed. */ | 
 | static const char version[] __devinitconst = | 
 | 	KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE | 
 | 	" Written by Donald Becker\n"; | 
 |  | 
 | /* This driver was written to use PCI memory space. Some early versions | 
 |    of the Rhine may only work correctly with I/O space accesses. */ | 
 | #ifdef CONFIG_VIA_RHINE_MMIO | 
 | #define USE_MMIO | 
 | #else | 
 | #endif | 
 |  | 
 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); | 
 | MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_param(max_interrupt_work, int, 0); | 
 | module_param(debug, int, 0); | 
 | module_param(rx_copybreak, int, 0); | 
 | module_param(avoid_D3, bool, 0); | 
 | MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); | 
 | MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); | 
 | MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); | 
 | MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); | 
 |  | 
 | /* | 
 | 		Theory of Operation | 
 |  | 
 | I. Board Compatibility | 
 |  | 
 | This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet | 
 | controller. | 
 |  | 
 | II. Board-specific settings | 
 |  | 
 | Boards with this chip are functional only in a bus-master PCI slot. | 
 |  | 
 | Many operational settings are loaded from the EEPROM to the Config word at | 
 | offset 0x78. For most of these settings, this driver assumes that they are | 
 | correct. | 
 | If this driver is compiled to use PCI memory space operations the EEPROM | 
 | must be configured to enable memory ops. | 
 |  | 
 | III. Driver operation | 
 |  | 
 | IIIa. Ring buffers | 
 |  | 
 | This driver uses two statically allocated fixed-size descriptor lists | 
 | formed into rings by a branch from the final descriptor to the beginning of | 
 | the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. | 
 |  | 
 | IIIb/c. Transmit/Receive Structure | 
 |  | 
 | This driver attempts to use a zero-copy receive and transmit scheme. | 
 |  | 
 | Alas, all data buffers are required to start on a 32 bit boundary, so | 
 | the driver must often copy transmit packets into bounce buffers. | 
 |  | 
 | The driver allocates full frame size skbuffs for the Rx ring buffers at | 
 | open() time and passes the skb->data field to the chip as receive data | 
 | buffers. When an incoming frame is less than RX_COPYBREAK bytes long, | 
 | a fresh skbuff is allocated and the frame is copied to the new skbuff. | 
 | When the incoming frame is larger, the skbuff is passed directly up the | 
 | protocol stack. Buffers consumed this way are replaced by newly allocated | 
 | skbuffs in the last phase of rhine_rx(). | 
 |  | 
 | The RX_COPYBREAK value is chosen to trade-off the memory wasted by | 
 | using a full-sized skbuff for small frames vs. the copying costs of larger | 
 | frames. New boards are typically used in generously configured machines | 
 | and the underfilled buffers have negligible impact compared to the benefit of | 
 | a single allocation size, so the default value of zero results in never | 
 | copying packets. When copying is done, the cost is usually mitigated by using | 
 | a combined copy/checksum routine. Copying also preloads the cache, which is | 
 | most useful with small frames. | 
 |  | 
 | Since the VIA chips are only able to transfer data to buffers on 32 bit | 
 | boundaries, the IP header at offset 14 in an ethernet frame isn't | 
 | longword aligned for further processing. Copying these unaligned buffers | 
 | has the beneficial effect of 16-byte aligning the IP header. | 
 |  | 
 | IIId. Synchronization | 
 |  | 
 | The driver runs as two independent, single-threaded flows of control. One | 
 | is the send-packet routine, which enforces single-threaded use by the | 
 | netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler, | 
 | which is single threaded by the hardware and interrupt handling software. | 
 |  | 
 | The send packet thread has partial control over the Tx ring. It locks the | 
 | netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in | 
 | the ring is not available it stops the transmit queue by | 
 | calling netif_stop_queue. | 
 |  | 
 | The interrupt handler has exclusive control over the Rx ring and records stats | 
 | from the Tx ring. After reaping the stats, it marks the Tx queue entry as | 
 | empty by incrementing the dirty_tx mark. If at least half of the entries in | 
 | the Rx ring are available the transmit queue is woken up if it was stopped. | 
 |  | 
 | IV. Notes | 
 |  | 
 | IVb. References | 
 |  | 
 | Preliminary VT86C100A manual from http://www.via.com.tw/ | 
 | http://www.scyld.com/expert/100mbps.html | 
 | http://www.scyld.com/expert/NWay.html | 
 | ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf | 
 | ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF | 
 |  | 
 |  | 
 | IVc. Errata | 
 |  | 
 | The VT86C100A manual is not reliable information. | 
 | The 3043 chip does not handle unaligned transmit or receive buffers, resulting | 
 | in significant performance degradation for bounce buffer copies on transmit | 
 | and unaligned IP headers on receive. | 
 | The chip does not pad to minimum transmit length. | 
 |  | 
 | */ | 
 |  | 
 |  | 
 | /* This table drives the PCI probe routines. It's mostly boilerplate in all | 
 |    of the drivers, and will likely be provided by some future kernel. | 
 |    Note the matching code -- the first table entry matchs all 56** cards but | 
 |    second only the 1234 card. | 
 | */ | 
 |  | 
 | enum rhine_revs { | 
 | 	VT86C100A	= 0x00, | 
 | 	VTunknown0	= 0x20, | 
 | 	VT6102		= 0x40, | 
 | 	VT8231		= 0x50,	/* Integrated MAC */ | 
 | 	VT8233		= 0x60,	/* Integrated MAC */ | 
 | 	VT8235		= 0x74,	/* Integrated MAC */ | 
 | 	VT8237		= 0x78,	/* Integrated MAC */ | 
 | 	VTunknown1	= 0x7C, | 
 | 	VT6105		= 0x80, | 
 | 	VT6105_B0	= 0x83, | 
 | 	VT6105L		= 0x8A, | 
 | 	VT6107		= 0x8C, | 
 | 	VTunknown2	= 0x8E, | 
 | 	VT6105M		= 0x90,	/* Management adapter */ | 
 | }; | 
 |  | 
 | enum rhine_quirks { | 
 | 	rqWOL		= 0x0001,	/* Wake-On-LAN support */ | 
 | 	rqForceReset	= 0x0002, | 
 | 	rq6patterns	= 0x0040,	/* 6 instead of 4 patterns for WOL */ | 
 | 	rqStatusWBRace	= 0x0080,	/* Tx Status Writeback Error possible */ | 
 | 	rqRhineI	= 0x0100,	/* See comment below */ | 
 | }; | 
 | /* | 
 |  * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable | 
 |  * MMIO as well as for the collision counter and the Tx FIFO underflow | 
 |  * indicator. In addition, Tx and Rx buffers need to 4 byte aligned. | 
 |  */ | 
 |  | 
 | /* Beware of PCI posted writes */ | 
 | #define IOSYNC	do { ioread8(ioaddr + StationAddr); } while (0) | 
 |  | 
 | static const struct pci_device_id rhine_pci_tbl[] = { | 
 | 	{ 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, },	/* VT86C100A */ | 
 | 	{ 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6102 */ | 
 | 	{ 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, },	/* 6105{,L,LOM} */ | 
 | 	{ 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6105M */ | 
 | 	{ }	/* terminate list */ | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); | 
 |  | 
 |  | 
 | /* Offsets to the device registers. */ | 
 | enum register_offsets { | 
 | 	StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08, | 
 | 	ChipCmd1=0x09, | 
 | 	IntrStatus=0x0C, IntrEnable=0x0E, | 
 | 	MulticastFilter0=0x10, MulticastFilter1=0x14, | 
 | 	RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54, | 
 | 	MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, | 
 | 	MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74, | 
 | 	ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B, | 
 | 	RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81, | 
 | 	StickyHW=0x83, IntrStatus2=0x84, | 
 | 	WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4, | 
 | 	WOLcrClr1=0xA6, WOLcgClr=0xA7, | 
 | 	PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD, | 
 | }; | 
 |  | 
 | /* Bits in ConfigD */ | 
 | enum backoff_bits { | 
 | 	BackOptional=0x01, BackModify=0x02, | 
 | 	BackCaptureEffect=0x04, BackRandom=0x08 | 
 | }; | 
 |  | 
 | #ifdef USE_MMIO | 
 | /* Registers we check that mmio and reg are the same. */ | 
 | static const int mmio_verify_registers[] = { | 
 | 	RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD, | 
 | 	0 | 
 | }; | 
 | #endif | 
 |  | 
 | /* Bits in the interrupt status/mask registers. */ | 
 | enum intr_status_bits { | 
 | 	IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020, | 
 | 	IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210, | 
 | 	IntrPCIErr=0x0040, | 
 | 	IntrStatsMax=0x0080, IntrRxEarly=0x0100, | 
 | 	IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000, | 
 | 	IntrTxAborted=0x2000, IntrLinkChange=0x4000, | 
 | 	IntrRxWakeUp=0x8000, | 
 | 	IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260, | 
 | 	IntrTxDescRace=0x080000,	/* mapped from IntrStatus2 */ | 
 | 	IntrTxErrSummary=0x082218, | 
 | }; | 
 |  | 
 | /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */ | 
 | enum wol_bits { | 
 | 	WOLucast	= 0x10, | 
 | 	WOLmagic	= 0x20, | 
 | 	WOLbmcast	= 0x30, | 
 | 	WOLlnkon	= 0x40, | 
 | 	WOLlnkoff	= 0x80, | 
 | }; | 
 |  | 
 | /* The Rx and Tx buffer descriptors. */ | 
 | struct rx_desc { | 
 | 	__le32 rx_status; | 
 | 	__le32 desc_length; /* Chain flag, Buffer/frame length */ | 
 | 	__le32 addr; | 
 | 	__le32 next_desc; | 
 | }; | 
 | struct tx_desc { | 
 | 	__le32 tx_status; | 
 | 	__le32 desc_length; /* Chain flag, Tx Config, Frame length */ | 
 | 	__le32 addr; | 
 | 	__le32 next_desc; | 
 | }; | 
 |  | 
 | /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */ | 
 | #define TXDESC		0x00e08000 | 
 |  | 
 | enum rx_status_bits { | 
 | 	RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F | 
 | }; | 
 |  | 
 | /* Bits in *_desc.*_status */ | 
 | enum desc_status_bits { | 
 | 	DescOwn=0x80000000 | 
 | }; | 
 |  | 
 | /* Bits in ChipCmd. */ | 
 | enum chip_cmd_bits { | 
 | 	CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08, | 
 | 	CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40, | 
 | 	Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04, | 
 | 	Cmd1NoTxPoll=0x08, Cmd1Reset=0x80, | 
 | }; | 
 |  | 
 | struct rhine_private { | 
 | 	/* Descriptor rings */ | 
 | 	struct rx_desc *rx_ring; | 
 | 	struct tx_desc *tx_ring; | 
 | 	dma_addr_t rx_ring_dma; | 
 | 	dma_addr_t tx_ring_dma; | 
 |  | 
 | 	/* The addresses of receive-in-place skbuffs. */ | 
 | 	struct sk_buff *rx_skbuff[RX_RING_SIZE]; | 
 | 	dma_addr_t rx_skbuff_dma[RX_RING_SIZE]; | 
 |  | 
 | 	/* The saved address of a sent-in-place packet/buffer, for later free(). */ | 
 | 	struct sk_buff *tx_skbuff[TX_RING_SIZE]; | 
 | 	dma_addr_t tx_skbuff_dma[TX_RING_SIZE]; | 
 |  | 
 | 	/* Tx bounce buffers (Rhine-I only) */ | 
 | 	unsigned char *tx_buf[TX_RING_SIZE]; | 
 | 	unsigned char *tx_bufs; | 
 | 	dma_addr_t tx_bufs_dma; | 
 |  | 
 | 	struct pci_dev *pdev; | 
 | 	long pioaddr; | 
 | 	struct net_device *dev; | 
 | 	struct napi_struct napi; | 
 | 	struct net_device_stats stats; | 
 | 	spinlock_t lock; | 
 |  | 
 | 	/* Frequently used values: keep some adjacent for cache effect. */ | 
 | 	u32 quirks; | 
 | 	struct rx_desc *rx_head_desc; | 
 | 	unsigned int cur_rx, dirty_rx;	/* Producer/consumer ring indices */ | 
 | 	unsigned int cur_tx, dirty_tx; | 
 | 	unsigned int rx_buf_sz;		/* Based on MTU+slack. */ | 
 | 	u8 wolopts; | 
 |  | 
 | 	u8 tx_thresh, rx_thresh; | 
 |  | 
 | 	struct mii_if_info mii_if; | 
 | 	void __iomem *base; | 
 | }; | 
 |  | 
 | static int  mdio_read(struct net_device *dev, int phy_id, int location); | 
 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value); | 
 | static int  rhine_open(struct net_device *dev); | 
 | static void rhine_tx_timeout(struct net_device *dev); | 
 | static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev); | 
 | static irqreturn_t rhine_interrupt(int irq, void *dev_instance); | 
 | static void rhine_tx(struct net_device *dev); | 
 | static int rhine_rx(struct net_device *dev, int limit); | 
 | static void rhine_error(struct net_device *dev, int intr_status); | 
 | static void rhine_set_rx_mode(struct net_device *dev); | 
 | static struct net_device_stats *rhine_get_stats(struct net_device *dev); | 
 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | 
 | static const struct ethtool_ops netdev_ethtool_ops; | 
 | static int  rhine_close(struct net_device *dev); | 
 | static void rhine_shutdown (struct pci_dev *pdev); | 
 |  | 
 | #define RHINE_WAIT_FOR(condition) do {					\ | 
 | 	int i=1024;							\ | 
 | 	while (!(condition) && --i)					\ | 
 | 		;							\ | 
 | 	if (debug > 1 && i < 512)					\ | 
 | 		printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n",	\ | 
 | 				DRV_NAME, 1024-i, __func__, __LINE__);	\ | 
 | } while(0) | 
 |  | 
 | static inline u32 get_intr_status(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	u32 intr_status; | 
 |  | 
 | 	intr_status = ioread16(ioaddr + IntrStatus); | 
 | 	/* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */ | 
 | 	if (rp->quirks & rqStatusWBRace) | 
 | 		intr_status |= ioread8(ioaddr + IntrStatus2) << 16; | 
 | 	return intr_status; | 
 | } | 
 |  | 
 | /* | 
 |  * Get power related registers into sane state. | 
 |  * Notify user about past WOL event. | 
 |  */ | 
 | static void rhine_power_init(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	u16 wolstat; | 
 |  | 
 | 	if (rp->quirks & rqWOL) { | 
 | 		/* Make sure chip is in power state D0 */ | 
 | 		iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW); | 
 |  | 
 | 		/* Disable "force PME-enable" */ | 
 | 		iowrite8(0x80, ioaddr + WOLcgClr); | 
 |  | 
 | 		/* Clear power-event config bits (WOL) */ | 
 | 		iowrite8(0xFF, ioaddr + WOLcrClr); | 
 | 		/* More recent cards can manage two additional patterns */ | 
 | 		if (rp->quirks & rq6patterns) | 
 | 			iowrite8(0x03, ioaddr + WOLcrClr1); | 
 |  | 
 | 		/* Save power-event status bits */ | 
 | 		wolstat = ioread8(ioaddr + PwrcsrSet); | 
 | 		if (rp->quirks & rq6patterns) | 
 | 			wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8; | 
 |  | 
 | 		/* Clear power-event status bits */ | 
 | 		iowrite8(0xFF, ioaddr + PwrcsrClr); | 
 | 		if (rp->quirks & rq6patterns) | 
 | 			iowrite8(0x03, ioaddr + PwrcsrClr1); | 
 |  | 
 | 		if (wolstat) { | 
 | 			char *reason; | 
 | 			switch (wolstat) { | 
 | 			case WOLmagic: | 
 | 				reason = "Magic packet"; | 
 | 				break; | 
 | 			case WOLlnkon: | 
 | 				reason = "Link went up"; | 
 | 				break; | 
 | 			case WOLlnkoff: | 
 | 				reason = "Link went down"; | 
 | 				break; | 
 | 			case WOLucast: | 
 | 				reason = "Unicast packet"; | 
 | 				break; | 
 | 			case WOLbmcast: | 
 | 				reason = "Multicast/broadcast packet"; | 
 | 				break; | 
 | 			default: | 
 | 				reason = "Unknown"; | 
 | 			} | 
 | 			printk(KERN_INFO "%s: Woke system up. Reason: %s.\n", | 
 | 			       DRV_NAME, reason); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void rhine_chip_reset(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	iowrite8(Cmd1Reset, ioaddr + ChipCmd1); | 
 | 	IOSYNC; | 
 |  | 
 | 	if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) { | 
 | 		printk(KERN_INFO "%s: Reset not complete yet. " | 
 | 			"Trying harder.\n", DRV_NAME); | 
 |  | 
 | 		/* Force reset */ | 
 | 		if (rp->quirks & rqForceReset) | 
 | 			iowrite8(0x40, ioaddr + MiscCmd); | 
 |  | 
 | 		/* Reset can take somewhat longer (rare) */ | 
 | 		RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset)); | 
 | 	} | 
 |  | 
 | 	if (debug > 1) | 
 | 		printk(KERN_INFO "%s: Reset %s.\n", dev->name, | 
 | 			(ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ? | 
 | 			"failed" : "succeeded"); | 
 | } | 
 |  | 
 | #ifdef USE_MMIO | 
 | static void enable_mmio(long pioaddr, u32 quirks) | 
 | { | 
 | 	int n; | 
 | 	if (quirks & rqRhineI) { | 
 | 		/* More recent docs say that this bit is reserved ... */ | 
 | 		n = inb(pioaddr + ConfigA) | 0x20; | 
 | 		outb(n, pioaddr + ConfigA); | 
 | 	} else { | 
 | 		n = inb(pioaddr + ConfigD) | 0x80; | 
 | 		outb(n, pioaddr + ConfigD); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM | 
 |  * (plus 0x6C for Rhine-I/II) | 
 |  */ | 
 | static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	outb(0x20, pioaddr + MACRegEEcsr); | 
 | 	RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20)); | 
 |  | 
 | #ifdef USE_MMIO | 
 | 	/* | 
 | 	 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable | 
 | 	 * MMIO. If reloading EEPROM was done first this could be avoided, but | 
 | 	 * it is not known if that still works with the "win98-reboot" problem. | 
 | 	 */ | 
 | 	enable_mmio(pioaddr, rp->quirks); | 
 | #endif | 
 |  | 
 | 	/* Turn off EEPROM-controlled wake-up (magic packet) */ | 
 | 	if (rp->quirks & rqWOL) | 
 | 		iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA); | 
 |  | 
 | } | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | static void rhine_poll(struct net_device *dev) | 
 | { | 
 | 	disable_irq(dev->irq); | 
 | 	rhine_interrupt(dev->irq, (void *)dev); | 
 | 	enable_irq(dev->irq); | 
 | } | 
 | #endif | 
 |  | 
 | static int rhine_napipoll(struct napi_struct *napi, int budget) | 
 | { | 
 | 	struct rhine_private *rp = container_of(napi, struct rhine_private, napi); | 
 | 	struct net_device *dev = rp->dev; | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	int work_done; | 
 |  | 
 | 	work_done = rhine_rx(dev, budget); | 
 |  | 
 | 	if (work_done < budget) { | 
 | 		napi_complete(napi); | 
 |  | 
 | 		iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | | 
 | 			  IntrRxDropped | IntrRxNoBuf | IntrTxAborted | | 
 | 			  IntrTxDone | IntrTxError | IntrTxUnderrun | | 
 | 			  IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
 | 			  ioaddr + IntrEnable); | 
 | 	} | 
 | 	return work_done; | 
 | } | 
 |  | 
 | static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	/* Reset the chip to erase previous misconfiguration. */ | 
 | 	rhine_chip_reset(dev); | 
 |  | 
 | 	/* Rhine-I needs extra time to recuperate before EEPROM reload */ | 
 | 	if (rp->quirks & rqRhineI) | 
 | 		msleep(5); | 
 |  | 
 | 	/* Reload EEPROM controlled bytes cleared by soft reset */ | 
 | 	rhine_reload_eeprom(pioaddr, dev); | 
 | } | 
 |  | 
 | static const struct net_device_ops rhine_netdev_ops = { | 
 | 	.ndo_open		 = rhine_open, | 
 | 	.ndo_stop		 = rhine_close, | 
 | 	.ndo_start_xmit		 = rhine_start_tx, | 
 | 	.ndo_get_stats		 = rhine_get_stats, | 
 | 	.ndo_set_multicast_list	 = rhine_set_rx_mode, | 
 | 	.ndo_validate_addr	 = eth_validate_addr, | 
 | 	.ndo_set_mac_address 	 = eth_mac_addr, | 
 | 	.ndo_do_ioctl		 = netdev_ioctl, | 
 | 	.ndo_tx_timeout 	 = rhine_tx_timeout, | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	.ndo_poll_controller	 = rhine_poll, | 
 | #endif | 
 | }; | 
 |  | 
 | static int __devinit rhine_init_one(struct pci_dev *pdev, | 
 | 				    const struct pci_device_id *ent) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	struct rhine_private *rp; | 
 | 	int i, rc; | 
 | 	u32 quirks; | 
 | 	long pioaddr; | 
 | 	long memaddr; | 
 | 	void __iomem *ioaddr; | 
 | 	int io_size, phy_id; | 
 | 	const char *name; | 
 | #ifdef USE_MMIO | 
 | 	int bar = 1; | 
 | #else | 
 | 	int bar = 0; | 
 | #endif | 
 |  | 
 | /* when built into the kernel, we only print version if device is found */ | 
 | #ifndef MODULE | 
 | 	static int printed_version; | 
 | 	if (!printed_version++) | 
 | 		printk(version); | 
 | #endif | 
 |  | 
 | 	io_size = 256; | 
 | 	phy_id = 0; | 
 | 	quirks = 0; | 
 | 	name = "Rhine"; | 
 | 	if (pdev->revision < VTunknown0) { | 
 | 		quirks = rqRhineI; | 
 | 		io_size = 128; | 
 | 	} | 
 | 	else if (pdev->revision >= VT6102) { | 
 | 		quirks = rqWOL | rqForceReset; | 
 | 		if (pdev->revision < VT6105) { | 
 | 			name = "Rhine II"; | 
 | 			quirks |= rqStatusWBRace;	/* Rhine-II exclusive */ | 
 | 		} | 
 | 		else { | 
 | 			phy_id = 1;	/* Integrated PHY, phy_id fixed to 1 */ | 
 | 			if (pdev->revision >= VT6105_B0) | 
 | 				quirks |= rq6patterns; | 
 | 			if (pdev->revision < VT6105M) | 
 | 				name = "Rhine III"; | 
 | 			else | 
 | 				name = "Rhine III (Management Adapter)"; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rc = pci_enable_device(pdev); | 
 | 	if (rc) | 
 | 		goto err_out; | 
 |  | 
 | 	/* this should always be supported */ | 
 | 	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | 
 | 	if (rc) { | 
 | 		printk(KERN_ERR "32-bit PCI DMA addresses not supported by " | 
 | 		       "the card!?\n"); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	/* sanity check */ | 
 | 	if ((pci_resource_len(pdev, 0) < io_size) || | 
 | 	    (pci_resource_len(pdev, 1) < io_size)) { | 
 | 		rc = -EIO; | 
 | 		printk(KERN_ERR "Insufficient PCI resources, aborting\n"); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	pioaddr = pci_resource_start(pdev, 0); | 
 | 	memaddr = pci_resource_start(pdev, 1); | 
 |  | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	dev = alloc_etherdev(sizeof(struct rhine_private)); | 
 | 	if (!dev) { | 
 | 		rc = -ENOMEM; | 
 | 		printk(KERN_ERR "alloc_etherdev failed\n"); | 
 | 		goto err_out; | 
 | 	} | 
 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 |  | 
 | 	rp = netdev_priv(dev); | 
 | 	rp->dev = dev; | 
 | 	rp->quirks = quirks; | 
 | 	rp->pioaddr = pioaddr; | 
 | 	rp->pdev = pdev; | 
 |  | 
 | 	rc = pci_request_regions(pdev, DRV_NAME); | 
 | 	if (rc) | 
 | 		goto err_out_free_netdev; | 
 |  | 
 | 	ioaddr = pci_iomap(pdev, bar, io_size); | 
 | 	if (!ioaddr) { | 
 | 		rc = -EIO; | 
 | 		printk(KERN_ERR "ioremap failed for device %s, region 0x%X " | 
 | 		       "@ 0x%lX\n", pci_name(pdev), io_size, memaddr); | 
 | 		goto err_out_free_res; | 
 | 	} | 
 |  | 
 | #ifdef USE_MMIO | 
 | 	enable_mmio(pioaddr, quirks); | 
 |  | 
 | 	/* Check that selected MMIO registers match the PIO ones */ | 
 | 	i = 0; | 
 | 	while (mmio_verify_registers[i]) { | 
 | 		int reg = mmio_verify_registers[i++]; | 
 | 		unsigned char a = inb(pioaddr+reg); | 
 | 		unsigned char b = readb(ioaddr+reg); | 
 | 		if (a != b) { | 
 | 			rc = -EIO; | 
 | 			printk(KERN_ERR "MMIO do not match PIO [%02x] " | 
 | 			       "(%02x != %02x)\n", reg, a, b); | 
 | 			goto err_out_unmap; | 
 | 		} | 
 | 	} | 
 | #endif /* USE_MMIO */ | 
 |  | 
 | 	dev->base_addr = (unsigned long)ioaddr; | 
 | 	rp->base = ioaddr; | 
 |  | 
 | 	/* Get chip registers into a sane state */ | 
 | 	rhine_power_init(dev); | 
 | 	rhine_hw_init(dev, pioaddr); | 
 |  | 
 | 	for (i = 0; i < 6; i++) | 
 | 		dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); | 
 | 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); | 
 |  | 
 | 	if (!is_valid_ether_addr(dev->perm_addr)) { | 
 | 		rc = -EIO; | 
 | 		printk(KERN_ERR "Invalid MAC address\n"); | 
 | 		goto err_out_unmap; | 
 | 	} | 
 |  | 
 | 	/* For Rhine-I/II, phy_id is loaded from EEPROM */ | 
 | 	if (!phy_id) | 
 | 		phy_id = ioread8(ioaddr + 0x6C); | 
 |  | 
 | 	dev->irq = pdev->irq; | 
 |  | 
 | 	spin_lock_init(&rp->lock); | 
 | 	rp->mii_if.dev = dev; | 
 | 	rp->mii_if.mdio_read = mdio_read; | 
 | 	rp->mii_if.mdio_write = mdio_write; | 
 | 	rp->mii_if.phy_id_mask = 0x1f; | 
 | 	rp->mii_if.reg_num_mask = 0x1f; | 
 |  | 
 | 	/* The chip-specific entries in the device structure. */ | 
 | 	dev->netdev_ops = &rhine_netdev_ops; | 
 | 	dev->ethtool_ops = &netdev_ethtool_ops, | 
 | 	dev->watchdog_timeo = TX_TIMEOUT; | 
 |  | 
 | 	netif_napi_add(dev, &rp->napi, rhine_napipoll, 64); | 
 |  | 
 | 	if (rp->quirks & rqRhineI) | 
 | 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; | 
 |  | 
 | 	/* dev->name not defined before register_netdev()! */ | 
 | 	rc = register_netdev(dev); | 
 | 	if (rc) | 
 | 		goto err_out_unmap; | 
 |  | 
 | 	printk(KERN_INFO "%s: VIA %s at 0x%lx, %pM, IRQ %d.\n", | 
 | 	       dev->name, name, | 
 | #ifdef USE_MMIO | 
 | 	       memaddr, | 
 | #else | 
 | 	       (long)ioaddr, | 
 | #endif | 
 | 	       dev->dev_addr, pdev->irq); | 
 |  | 
 | 	pci_set_drvdata(pdev, dev); | 
 |  | 
 | 	{ | 
 | 		u16 mii_cmd; | 
 | 		int mii_status = mdio_read(dev, phy_id, 1); | 
 | 		mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE; | 
 | 		mdio_write(dev, phy_id, MII_BMCR, mii_cmd); | 
 | 		if (mii_status != 0xffff && mii_status != 0x0000) { | 
 | 			rp->mii_if.advertising = mdio_read(dev, phy_id, 4); | 
 | 			printk(KERN_INFO "%s: MII PHY found at address " | 
 | 			       "%d, status 0x%4.4x advertising %4.4x " | 
 | 			       "Link %4.4x.\n", dev->name, phy_id, | 
 | 			       mii_status, rp->mii_if.advertising, | 
 | 			       mdio_read(dev, phy_id, 5)); | 
 |  | 
 | 			/* set IFF_RUNNING */ | 
 | 			if (mii_status & BMSR_LSTATUS) | 
 | 				netif_carrier_on(dev); | 
 | 			else | 
 | 				netif_carrier_off(dev); | 
 |  | 
 | 		} | 
 | 	} | 
 | 	rp->mii_if.phy_id = phy_id; | 
 | 	if (debug > 1 && avoid_D3) | 
 | 		printk(KERN_INFO "%s: No D3 power state at shutdown.\n", | 
 | 		       dev->name); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out_unmap: | 
 | 	pci_iounmap(pdev, ioaddr); | 
 | err_out_free_res: | 
 | 	pci_release_regions(pdev); | 
 | err_out_free_netdev: | 
 | 	free_netdev(dev); | 
 | err_out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int alloc_ring(struct net_device* dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void *ring; | 
 | 	dma_addr_t ring_dma; | 
 |  | 
 | 	ring = pci_alloc_consistent(rp->pdev, | 
 | 				    RX_RING_SIZE * sizeof(struct rx_desc) + | 
 | 				    TX_RING_SIZE * sizeof(struct tx_desc), | 
 | 				    &ring_dma); | 
 | 	if (!ring) { | 
 | 		printk(KERN_ERR "Could not allocate DMA memory.\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	if (rp->quirks & rqRhineI) { | 
 | 		rp->tx_bufs = pci_alloc_consistent(rp->pdev, | 
 | 						   PKT_BUF_SZ * TX_RING_SIZE, | 
 | 						   &rp->tx_bufs_dma); | 
 | 		if (rp->tx_bufs == NULL) { | 
 | 			pci_free_consistent(rp->pdev, | 
 | 				    RX_RING_SIZE * sizeof(struct rx_desc) + | 
 | 				    TX_RING_SIZE * sizeof(struct tx_desc), | 
 | 				    ring, ring_dma); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rp->rx_ring = ring; | 
 | 	rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc); | 
 | 	rp->rx_ring_dma = ring_dma; | 
 | 	rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void free_ring(struct net_device* dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	pci_free_consistent(rp->pdev, | 
 | 			    RX_RING_SIZE * sizeof(struct rx_desc) + | 
 | 			    TX_RING_SIZE * sizeof(struct tx_desc), | 
 | 			    rp->rx_ring, rp->rx_ring_dma); | 
 | 	rp->tx_ring = NULL; | 
 |  | 
 | 	if (rp->tx_bufs) | 
 | 		pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE, | 
 | 				    rp->tx_bufs, rp->tx_bufs_dma); | 
 |  | 
 | 	rp->tx_bufs = NULL; | 
 |  | 
 | } | 
 |  | 
 | static void alloc_rbufs(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	dma_addr_t next; | 
 | 	int i; | 
 |  | 
 | 	rp->dirty_rx = rp->cur_rx = 0; | 
 |  | 
 | 	rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); | 
 | 	rp->rx_head_desc = &rp->rx_ring[0]; | 
 | 	next = rp->rx_ring_dma; | 
 |  | 
 | 	/* Init the ring entries */ | 
 | 	for (i = 0; i < RX_RING_SIZE; i++) { | 
 | 		rp->rx_ring[i].rx_status = 0; | 
 | 		rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz); | 
 | 		next += sizeof(struct rx_desc); | 
 | 		rp->rx_ring[i].next_desc = cpu_to_le32(next); | 
 | 		rp->rx_skbuff[i] = NULL; | 
 | 	} | 
 | 	/* Mark the last entry as wrapping the ring. */ | 
 | 	rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma); | 
 |  | 
 | 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */ | 
 | 	for (i = 0; i < RX_RING_SIZE; i++) { | 
 | 		struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz); | 
 | 		rp->rx_skbuff[i] = skb; | 
 | 		if (skb == NULL) | 
 | 			break; | 
 | 		skb->dev = dev;                 /* Mark as being used by this device. */ | 
 |  | 
 | 		rp->rx_skbuff_dma[i] = | 
 | 			pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz, | 
 | 				       PCI_DMA_FROMDEVICE); | 
 |  | 
 | 		rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]); | 
 | 		rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn); | 
 | 	} | 
 | 	rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); | 
 | } | 
 |  | 
 | static void free_rbufs(struct net_device* dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int i; | 
 |  | 
 | 	/* Free all the skbuffs in the Rx queue. */ | 
 | 	for (i = 0; i < RX_RING_SIZE; i++) { | 
 | 		rp->rx_ring[i].rx_status = 0; | 
 | 		rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ | 
 | 		if (rp->rx_skbuff[i]) { | 
 | 			pci_unmap_single(rp->pdev, | 
 | 					 rp->rx_skbuff_dma[i], | 
 | 					 rp->rx_buf_sz, PCI_DMA_FROMDEVICE); | 
 | 			dev_kfree_skb(rp->rx_skbuff[i]); | 
 | 		} | 
 | 		rp->rx_skbuff[i] = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static void alloc_tbufs(struct net_device* dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	dma_addr_t next; | 
 | 	int i; | 
 |  | 
 | 	rp->dirty_tx = rp->cur_tx = 0; | 
 | 	next = rp->tx_ring_dma; | 
 | 	for (i = 0; i < TX_RING_SIZE; i++) { | 
 | 		rp->tx_skbuff[i] = NULL; | 
 | 		rp->tx_ring[i].tx_status = 0; | 
 | 		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); | 
 | 		next += sizeof(struct tx_desc); | 
 | 		rp->tx_ring[i].next_desc = cpu_to_le32(next); | 
 | 		if (rp->quirks & rqRhineI) | 
 | 			rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; | 
 | 	} | 
 | 	rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma); | 
 |  | 
 | } | 
 |  | 
 | static void free_tbufs(struct net_device* dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < TX_RING_SIZE; i++) { | 
 | 		rp->tx_ring[i].tx_status = 0; | 
 | 		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); | 
 | 		rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ | 
 | 		if (rp->tx_skbuff[i]) { | 
 | 			if (rp->tx_skbuff_dma[i]) { | 
 | 				pci_unmap_single(rp->pdev, | 
 | 						 rp->tx_skbuff_dma[i], | 
 | 						 rp->tx_skbuff[i]->len, | 
 | 						 PCI_DMA_TODEVICE); | 
 | 			} | 
 | 			dev_kfree_skb(rp->tx_skbuff[i]); | 
 | 		} | 
 | 		rp->tx_skbuff[i] = NULL; | 
 | 		rp->tx_buf[i] = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static void rhine_check_media(struct net_device *dev, unsigned int init_media) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	mii_check_media(&rp->mii_if, debug, init_media); | 
 |  | 
 | 	if (rp->mii_if.full_duplex) | 
 | 	    iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex, | 
 | 		   ioaddr + ChipCmd1); | 
 | 	else | 
 | 	    iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex, | 
 | 		   ioaddr + ChipCmd1); | 
 | 	if (debug > 1) | 
 | 		printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name, | 
 | 			rp->mii_if.force_media, netif_carrier_ok(dev)); | 
 | } | 
 |  | 
 | /* Called after status of force_media possibly changed */ | 
 | static void rhine_set_carrier(struct mii_if_info *mii) | 
 | { | 
 | 	if (mii->force_media) { | 
 | 		/* autoneg is off: Link is always assumed to be up */ | 
 | 		if (!netif_carrier_ok(mii->dev)) | 
 | 			netif_carrier_on(mii->dev); | 
 | 	} | 
 | 	else	/* Let MMI library update carrier status */ | 
 | 		rhine_check_media(mii->dev, 0); | 
 | 	if (debug > 1) | 
 | 		printk(KERN_INFO "%s: force_media %d, carrier %d\n", | 
 | 		       mii->dev->name, mii->force_media, | 
 | 		       netif_carrier_ok(mii->dev)); | 
 | } | 
 |  | 
 | static void init_registers(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 6; i++) | 
 | 		iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); | 
 |  | 
 | 	/* Initialize other registers. */ | 
 | 	iowrite16(0x0006, ioaddr + PCIBusConfig);	/* Tune configuration??? */ | 
 | 	/* Configure initial FIFO thresholds. */ | 
 | 	iowrite8(0x20, ioaddr + TxConfig); | 
 | 	rp->tx_thresh = 0x20; | 
 | 	rp->rx_thresh = 0x60;		/* Written in rhine_set_rx_mode(). */ | 
 |  | 
 | 	iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr); | 
 | 	iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr); | 
 |  | 
 | 	rhine_set_rx_mode(dev); | 
 |  | 
 | 	napi_enable(&rp->napi); | 
 |  | 
 | 	/* Enable interrupts by setting the interrupt mask. */ | 
 | 	iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | | 
 | 	       IntrRxDropped | IntrRxNoBuf | IntrTxAborted | | 
 | 	       IntrTxDone | IntrTxError | IntrTxUnderrun | | 
 | 	       IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
 | 	       ioaddr + IntrEnable); | 
 |  | 
 | 	iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8), | 
 | 	       ioaddr + ChipCmd); | 
 | 	rhine_check_media(dev, 1); | 
 | } | 
 |  | 
 | /* Enable MII link status auto-polling (required for IntrLinkChange) */ | 
 | static void rhine_enable_linkmon(void __iomem *ioaddr) | 
 | { | 
 | 	iowrite8(0, ioaddr + MIICmd); | 
 | 	iowrite8(MII_BMSR, ioaddr + MIIRegAddr); | 
 | 	iowrite8(0x80, ioaddr + MIICmd); | 
 |  | 
 | 	RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20)); | 
 |  | 
 | 	iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr); | 
 | } | 
 |  | 
 | /* Disable MII link status auto-polling (required for MDIO access) */ | 
 | static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) | 
 | { | 
 | 	iowrite8(0, ioaddr + MIICmd); | 
 |  | 
 | 	if (quirks & rqRhineI) { | 
 | 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR | 
 |  | 
 | 		/* Can be called from ISR. Evil. */ | 
 | 		mdelay(1); | 
 |  | 
 | 		/* 0x80 must be set immediately before turning it off */ | 
 | 		iowrite8(0x80, ioaddr + MIICmd); | 
 |  | 
 | 		RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20); | 
 |  | 
 | 		/* Heh. Now clear 0x80 again. */ | 
 | 		iowrite8(0, ioaddr + MIICmd); | 
 | 	} | 
 | 	else | 
 | 		RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80); | 
 | } | 
 |  | 
 | /* Read and write over the MII Management Data I/O (MDIO) interface. */ | 
 |  | 
 | static int mdio_read(struct net_device *dev, int phy_id, int regnum) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	int result; | 
 |  | 
 | 	rhine_disable_linkmon(ioaddr, rp->quirks); | 
 |  | 
 | 	/* rhine_disable_linkmon already cleared MIICmd */ | 
 | 	iowrite8(phy_id, ioaddr + MIIPhyAddr); | 
 | 	iowrite8(regnum, ioaddr + MIIRegAddr); | 
 | 	iowrite8(0x40, ioaddr + MIICmd);		/* Trigger read */ | 
 | 	RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40)); | 
 | 	result = ioread16(ioaddr + MIIData); | 
 |  | 
 | 	rhine_enable_linkmon(ioaddr); | 
 | 	return result; | 
 | } | 
 |  | 
 | static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	rhine_disable_linkmon(ioaddr, rp->quirks); | 
 |  | 
 | 	/* rhine_disable_linkmon already cleared MIICmd */ | 
 | 	iowrite8(phy_id, ioaddr + MIIPhyAddr); | 
 | 	iowrite8(regnum, ioaddr + MIIRegAddr); | 
 | 	iowrite16(value, ioaddr + MIIData); | 
 | 	iowrite8(0x20, ioaddr + MIICmd);		/* Trigger write */ | 
 | 	RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20)); | 
 |  | 
 | 	rhine_enable_linkmon(ioaddr); | 
 | } | 
 |  | 
 | static int rhine_open(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	int rc; | 
 |  | 
 | 	rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name, | 
 | 			dev); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	if (debug > 1) | 
 | 		printk(KERN_DEBUG "%s: rhine_open() irq %d.\n", | 
 | 		       dev->name, rp->pdev->irq); | 
 |  | 
 | 	rc = alloc_ring(dev); | 
 | 	if (rc) { | 
 | 		free_irq(rp->pdev->irq, dev); | 
 | 		return rc; | 
 | 	} | 
 | 	alloc_rbufs(dev); | 
 | 	alloc_tbufs(dev); | 
 | 	rhine_chip_reset(dev); | 
 | 	init_registers(dev); | 
 | 	if (debug > 2) | 
 | 		printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x " | 
 | 		       "MII status: %4.4x.\n", | 
 | 		       dev->name, ioread16(ioaddr + ChipCmd), | 
 | 		       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); | 
 |  | 
 | 	netif_start_queue(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void rhine_tx_timeout(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " | 
 | 	       "%4.4x, resetting...\n", | 
 | 	       dev->name, ioread16(ioaddr + IntrStatus), | 
 | 	       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); | 
 |  | 
 | 	/* protect against concurrent rx interrupts */ | 
 | 	disable_irq(rp->pdev->irq); | 
 |  | 
 | 	napi_disable(&rp->napi); | 
 |  | 
 | 	spin_lock(&rp->lock); | 
 |  | 
 | 	/* clear all descriptors */ | 
 | 	free_tbufs(dev); | 
 | 	free_rbufs(dev); | 
 | 	alloc_tbufs(dev); | 
 | 	alloc_rbufs(dev); | 
 |  | 
 | 	/* Reinitialize the hardware. */ | 
 | 	rhine_chip_reset(dev); | 
 | 	init_registers(dev); | 
 |  | 
 | 	spin_unlock(&rp->lock); | 
 | 	enable_irq(rp->pdev->irq); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 | 	rp->stats.tx_errors++; | 
 | 	netif_wake_queue(dev); | 
 | } | 
 |  | 
 | static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	unsigned entry; | 
 |  | 
 | 	/* Caution: the write order is important here, set the field | 
 | 	   with the "ownership" bits last. */ | 
 |  | 
 | 	/* Calculate the next Tx descriptor entry. */ | 
 | 	entry = rp->cur_tx % TX_RING_SIZE; | 
 |  | 
 | 	if (skb_padto(skb, ETH_ZLEN)) | 
 | 		return 0; | 
 |  | 
 | 	rp->tx_skbuff[entry] = skb; | 
 |  | 
 | 	if ((rp->quirks & rqRhineI) && | 
 | 	    (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) { | 
 | 		/* Must use alignment buffer. */ | 
 | 		if (skb->len > PKT_BUF_SZ) { | 
 | 			/* packet too long, drop it */ | 
 | 			dev_kfree_skb(skb); | 
 | 			rp->tx_skbuff[entry] = NULL; | 
 | 			rp->stats.tx_dropped++; | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		/* Padding is not copied and so must be redone. */ | 
 | 		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]); | 
 | 		if (skb->len < ETH_ZLEN) | 
 | 			memset(rp->tx_buf[entry] + skb->len, 0, | 
 | 			       ETH_ZLEN - skb->len); | 
 | 		rp->tx_skbuff_dma[entry] = 0; | 
 | 		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma + | 
 | 						      (rp->tx_buf[entry] - | 
 | 						       rp->tx_bufs)); | 
 | 	} else { | 
 | 		rp->tx_skbuff_dma[entry] = | 
 | 			pci_map_single(rp->pdev, skb->data, skb->len, | 
 | 				       PCI_DMA_TODEVICE); | 
 | 		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]); | 
 | 	} | 
 |  | 
 | 	rp->tx_ring[entry].desc_length = | 
 | 		cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); | 
 |  | 
 | 	/* lock eth irq */ | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	wmb(); | 
 | 	rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); | 
 | 	wmb(); | 
 |  | 
 | 	rp->cur_tx++; | 
 |  | 
 | 	/* Non-x86 Todo: explicitly flush cache lines here. */ | 
 |  | 
 | 	/* Wake the potentially-idle transmit channel */ | 
 | 	iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, | 
 | 	       ioaddr + ChipCmd1); | 
 | 	IOSYNC; | 
 |  | 
 | 	if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN) | 
 | 		netif_stop_queue(dev); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 |  | 
 | 	spin_unlock_irq(&rp->lock); | 
 |  | 
 | 	if (debug > 4) { | 
 | 		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", | 
 | 		       dev->name, rp->cur_tx-1, entry); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* The interrupt handler does all of the Rx thread work and cleans up | 
 |    after the Tx thread. */ | 
 | static irqreturn_t rhine_interrupt(int irq, void *dev_instance) | 
 | { | 
 | 	struct net_device *dev = dev_instance; | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	u32 intr_status; | 
 | 	int boguscnt = max_interrupt_work; | 
 | 	int handled = 0; | 
 |  | 
 | 	while ((intr_status = get_intr_status(dev))) { | 
 | 		handled = 1; | 
 |  | 
 | 		/* Acknowledge all of the current interrupt sources ASAP. */ | 
 | 		if (intr_status & IntrTxDescRace) | 
 | 			iowrite8(0x08, ioaddr + IntrStatus2); | 
 | 		iowrite16(intr_status & 0xffff, ioaddr + IntrStatus); | 
 | 		IOSYNC; | 
 |  | 
 | 		if (debug > 4) | 
 | 			printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n", | 
 | 			       dev->name, intr_status); | 
 |  | 
 | 		if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | | 
 | 				   IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { | 
 | 			iowrite16(IntrTxAborted | | 
 | 				  IntrTxDone | IntrTxError | IntrTxUnderrun | | 
 | 				  IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
 | 				  ioaddr + IntrEnable); | 
 |  | 
 | 			napi_schedule(&rp->napi); | 
 | 		} | 
 |  | 
 | 		if (intr_status & (IntrTxErrSummary | IntrTxDone)) { | 
 | 			if (intr_status & IntrTxErrSummary) { | 
 | 				/* Avoid scavenging before Tx engine turned off */ | 
 | 				RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); | 
 | 				if (debug > 2 && | 
 | 				    ioread8(ioaddr+ChipCmd) & CmdTxOn) | 
 | 					printk(KERN_WARNING "%s: " | 
 | 					       "rhine_interrupt() Tx engine " | 
 | 					       "still on.\n", dev->name); | 
 | 			} | 
 | 			rhine_tx(dev); | 
 | 		} | 
 |  | 
 | 		/* Abnormal error summary/uncommon events handlers. */ | 
 | 		if (intr_status & (IntrPCIErr | IntrLinkChange | | 
 | 				   IntrStatsMax | IntrTxError | IntrTxAborted | | 
 | 				   IntrTxUnderrun | IntrTxDescRace)) | 
 | 			rhine_error(dev, intr_status); | 
 |  | 
 | 		if (--boguscnt < 0) { | 
 | 			printk(KERN_WARNING "%s: Too much work at interrupt, " | 
 | 			       "status=%#8.8x.\n", | 
 | 			       dev->name, intr_status); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (debug > 3) | 
 | 		printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n", | 
 | 		       dev->name, ioread16(ioaddr + IntrStatus)); | 
 | 	return IRQ_RETVAL(handled); | 
 | } | 
 |  | 
 | /* This routine is logically part of the interrupt handler, but isolated | 
 |    for clarity. */ | 
 | static void rhine_tx(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE; | 
 |  | 
 | 	spin_lock(&rp->lock); | 
 |  | 
 | 	/* find and cleanup dirty tx descriptors */ | 
 | 	while (rp->dirty_tx != rp->cur_tx) { | 
 | 		txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); | 
 | 		if (debug > 6) | 
 | 			printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n", | 
 | 			       entry, txstatus); | 
 | 		if (txstatus & DescOwn) | 
 | 			break; | 
 | 		if (txstatus & 0x8000) { | 
 | 			if (debug > 1) | 
 | 				printk(KERN_DEBUG "%s: Transmit error, " | 
 | 				       "Tx status %8.8x.\n", | 
 | 				       dev->name, txstatus); | 
 | 			rp->stats.tx_errors++; | 
 | 			if (txstatus & 0x0400) rp->stats.tx_carrier_errors++; | 
 | 			if (txstatus & 0x0200) rp->stats.tx_window_errors++; | 
 | 			if (txstatus & 0x0100) rp->stats.tx_aborted_errors++; | 
 | 			if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++; | 
 | 			if (((rp->quirks & rqRhineI) && txstatus & 0x0002) || | 
 | 			    (txstatus & 0x0800) || (txstatus & 0x1000)) { | 
 | 				rp->stats.tx_fifo_errors++; | 
 | 				rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); | 
 | 				break; /* Keep the skb - we try again */ | 
 | 			} | 
 | 			/* Transmitter restarted in 'abnormal' handler. */ | 
 | 		} else { | 
 | 			if (rp->quirks & rqRhineI) | 
 | 				rp->stats.collisions += (txstatus >> 3) & 0x0F; | 
 | 			else | 
 | 				rp->stats.collisions += txstatus & 0x0F; | 
 | 			if (debug > 6) | 
 | 				printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n", | 
 | 				       (txstatus >> 3) & 0xF, | 
 | 				       txstatus & 0xF); | 
 | 			rp->stats.tx_bytes += rp->tx_skbuff[entry]->len; | 
 | 			rp->stats.tx_packets++; | 
 | 		} | 
 | 		/* Free the original skb. */ | 
 | 		if (rp->tx_skbuff_dma[entry]) { | 
 | 			pci_unmap_single(rp->pdev, | 
 | 					 rp->tx_skbuff_dma[entry], | 
 | 					 rp->tx_skbuff[entry]->len, | 
 | 					 PCI_DMA_TODEVICE); | 
 | 		} | 
 | 		dev_kfree_skb_irq(rp->tx_skbuff[entry]); | 
 | 		rp->tx_skbuff[entry] = NULL; | 
 | 		entry = (++rp->dirty_tx) % TX_RING_SIZE; | 
 | 	} | 
 | 	if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4) | 
 | 		netif_wake_queue(dev); | 
 |  | 
 | 	spin_unlock(&rp->lock); | 
 | } | 
 |  | 
 | /* Process up to limit frames from receive ring */ | 
 | static int rhine_rx(struct net_device *dev, int limit) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int count; | 
 | 	int entry = rp->cur_rx % RX_RING_SIZE; | 
 |  | 
 | 	if (debug > 4) { | 
 | 		printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", | 
 | 		       dev->name, entry, | 
 | 		       le32_to_cpu(rp->rx_head_desc->rx_status)); | 
 | 	} | 
 |  | 
 | 	/* If EOP is set on the next entry, it's a new packet. Send it up. */ | 
 | 	for (count = 0; count < limit; ++count) { | 
 | 		struct rx_desc *desc = rp->rx_head_desc; | 
 | 		u32 desc_status = le32_to_cpu(desc->rx_status); | 
 | 		int data_size = desc_status >> 16; | 
 |  | 
 | 		if (desc_status & DescOwn) | 
 | 			break; | 
 |  | 
 | 		if (debug > 4) | 
 | 			printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", | 
 | 			       desc_status); | 
 |  | 
 | 		if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { | 
 | 			if ((desc_status & RxWholePkt) != RxWholePkt) { | 
 | 				printk(KERN_WARNING "%s: Oversized Ethernet " | 
 | 				       "frame spanned multiple buffers, entry " | 
 | 				       "%#x length %d status %8.8x!\n", | 
 | 				       dev->name, entry, data_size, | 
 | 				       desc_status); | 
 | 				printk(KERN_WARNING "%s: Oversized Ethernet " | 
 | 				       "frame %p vs %p.\n", dev->name, | 
 | 				       rp->rx_head_desc, &rp->rx_ring[entry]); | 
 | 				rp->stats.rx_length_errors++; | 
 | 			} else if (desc_status & RxErr) { | 
 | 				/* There was a error. */ | 
 | 				if (debug > 2) | 
 | 					printk(KERN_DEBUG "rhine_rx() Rx " | 
 | 					       "error was %8.8x.\n", | 
 | 					       desc_status); | 
 | 				rp->stats.rx_errors++; | 
 | 				if (desc_status & 0x0030) rp->stats.rx_length_errors++; | 
 | 				if (desc_status & 0x0048) rp->stats.rx_fifo_errors++; | 
 | 				if (desc_status & 0x0004) rp->stats.rx_frame_errors++; | 
 | 				if (desc_status & 0x0002) { | 
 | 					/* this can also be updated outside the interrupt handler */ | 
 | 					spin_lock(&rp->lock); | 
 | 					rp->stats.rx_crc_errors++; | 
 | 					spin_unlock(&rp->lock); | 
 | 				} | 
 | 			} | 
 | 		} else { | 
 | 			struct sk_buff *skb; | 
 | 			/* Length should omit the CRC */ | 
 | 			int pkt_len = data_size - 4; | 
 |  | 
 | 			/* Check if the packet is long enough to accept without | 
 | 			   copying to a minimally-sized skbuff. */ | 
 | 			if (pkt_len < rx_copybreak && | 
 | 				(skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN)) != NULL) { | 
 | 				skb_reserve(skb, NET_IP_ALIGN);	/* 16 byte align the IP header */ | 
 | 				pci_dma_sync_single_for_cpu(rp->pdev, | 
 | 							    rp->rx_skbuff_dma[entry], | 
 | 							    rp->rx_buf_sz, | 
 | 							    PCI_DMA_FROMDEVICE); | 
 |  | 
 | 				skb_copy_to_linear_data(skb, | 
 | 						 rp->rx_skbuff[entry]->data, | 
 | 						 pkt_len); | 
 | 				skb_put(skb, pkt_len); | 
 | 				pci_dma_sync_single_for_device(rp->pdev, | 
 | 							       rp->rx_skbuff_dma[entry], | 
 | 							       rp->rx_buf_sz, | 
 | 							       PCI_DMA_FROMDEVICE); | 
 | 			} else { | 
 | 				skb = rp->rx_skbuff[entry]; | 
 | 				if (skb == NULL) { | 
 | 					printk(KERN_ERR "%s: Inconsistent Rx " | 
 | 					       "descriptor chain.\n", | 
 | 					       dev->name); | 
 | 					break; | 
 | 				} | 
 | 				rp->rx_skbuff[entry] = NULL; | 
 | 				skb_put(skb, pkt_len); | 
 | 				pci_unmap_single(rp->pdev, | 
 | 						 rp->rx_skbuff_dma[entry], | 
 | 						 rp->rx_buf_sz, | 
 | 						 PCI_DMA_FROMDEVICE); | 
 | 			} | 
 | 			skb->protocol = eth_type_trans(skb, dev); | 
 | 			netif_receive_skb(skb); | 
 | 			rp->stats.rx_bytes += pkt_len; | 
 | 			rp->stats.rx_packets++; | 
 | 		} | 
 | 		entry = (++rp->cur_rx) % RX_RING_SIZE; | 
 | 		rp->rx_head_desc = &rp->rx_ring[entry]; | 
 | 	} | 
 |  | 
 | 	/* Refill the Rx ring buffers. */ | 
 | 	for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) { | 
 | 		struct sk_buff *skb; | 
 | 		entry = rp->dirty_rx % RX_RING_SIZE; | 
 | 		if (rp->rx_skbuff[entry] == NULL) { | 
 | 			skb = netdev_alloc_skb(dev, rp->rx_buf_sz); | 
 | 			rp->rx_skbuff[entry] = skb; | 
 | 			if (skb == NULL) | 
 | 				break;	/* Better luck next round. */ | 
 | 			skb->dev = dev;	/* Mark as being used by this device. */ | 
 | 			rp->rx_skbuff_dma[entry] = | 
 | 				pci_map_single(rp->pdev, skb->data, | 
 | 					       rp->rx_buf_sz, | 
 | 					       PCI_DMA_FROMDEVICE); | 
 | 			rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]); | 
 | 		} | 
 | 		rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); | 
 | 	} | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | /* | 
 |  * Clears the "tally counters" for CRC errors and missed frames(?). | 
 |  * It has been reported that some chips need a write of 0 to clear | 
 |  * these, for others the counters are set to 1 when written to and | 
 |  * instead cleared when read. So we clear them both ways ... | 
 |  */ | 
 | static inline void clear_tally_counters(void __iomem *ioaddr) | 
 | { | 
 | 	iowrite32(0, ioaddr + RxMissed); | 
 | 	ioread16(ioaddr + RxCRCErrs); | 
 | 	ioread16(ioaddr + RxMissed); | 
 | } | 
 |  | 
 | static void rhine_restart_tx(struct net_device *dev) { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	int entry = rp->dirty_tx % TX_RING_SIZE; | 
 | 	u32 intr_status; | 
 |  | 
 | 	/* | 
 | 	 * If new errors occured, we need to sort them out before doing Tx. | 
 | 	 * In that case the ISR will be back here RSN anyway. | 
 | 	 */ | 
 | 	intr_status = get_intr_status(dev); | 
 |  | 
 | 	if ((intr_status & IntrTxErrSummary) == 0) { | 
 |  | 
 | 		/* We know better than the chip where it should continue. */ | 
 | 		iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc), | 
 | 		       ioaddr + TxRingPtr); | 
 |  | 
 | 		iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn, | 
 | 		       ioaddr + ChipCmd); | 
 | 		iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, | 
 | 		       ioaddr + ChipCmd1); | 
 | 		IOSYNC; | 
 | 	} | 
 | 	else { | 
 | 		/* This should never happen */ | 
 | 		if (debug > 1) | 
 | 			printk(KERN_WARNING "%s: rhine_restart_tx() " | 
 | 			       "Another error occured %8.8x.\n", | 
 | 			       dev->name, intr_status); | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | static void rhine_error(struct net_device *dev, int intr_status) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	spin_lock(&rp->lock); | 
 |  | 
 | 	if (intr_status & IntrLinkChange) | 
 | 		rhine_check_media(dev, 0); | 
 | 	if (intr_status & IntrStatsMax) { | 
 | 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); | 
 | 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); | 
 | 		clear_tally_counters(ioaddr); | 
 | 	} | 
 | 	if (intr_status & IntrTxAborted) { | 
 | 		if (debug > 1) | 
 | 			printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n", | 
 | 			       dev->name, intr_status); | 
 | 	} | 
 | 	if (intr_status & IntrTxUnderrun) { | 
 | 		if (rp->tx_thresh < 0xE0) | 
 | 			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig); | 
 | 		if (debug > 1) | 
 | 			printk(KERN_INFO "%s: Transmitter underrun, Tx " | 
 | 			       "threshold now %2.2x.\n", | 
 | 			       dev->name, rp->tx_thresh); | 
 | 	} | 
 | 	if (intr_status & IntrTxDescRace) { | 
 | 		if (debug > 2) | 
 | 			printk(KERN_INFO "%s: Tx descriptor write-back race.\n", | 
 | 			       dev->name); | 
 | 	} | 
 | 	if ((intr_status & IntrTxError) && | 
 | 	    (intr_status & (IntrTxAborted | | 
 | 	     IntrTxUnderrun | IntrTxDescRace)) == 0) { | 
 | 		if (rp->tx_thresh < 0xE0) { | 
 | 			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig); | 
 | 		} | 
 | 		if (debug > 1) | 
 | 			printk(KERN_INFO "%s: Unspecified error. Tx " | 
 | 			       "threshold now %2.2x.\n", | 
 | 			       dev->name, rp->tx_thresh); | 
 | 	} | 
 | 	if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace | | 
 | 			   IntrTxError)) | 
 | 		rhine_restart_tx(dev); | 
 |  | 
 | 	if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun | | 
 | 			    IntrTxError | IntrTxAborted | IntrNormalSummary | | 
 | 			    IntrTxDescRace)) { | 
 | 		if (debug > 1) | 
 | 			printk(KERN_ERR "%s: Something Wicked happened! " | 
 | 			       "%8.8x.\n", dev->name, intr_status); | 
 | 	} | 
 |  | 
 | 	spin_unlock(&rp->lock); | 
 | } | 
 |  | 
 | static struct net_device_stats *rhine_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&rp->lock, flags); | 
 | 	rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); | 
 | 	rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); | 
 | 	clear_tally_counters(ioaddr); | 
 | 	spin_unlock_irqrestore(&rp->lock, flags); | 
 |  | 
 | 	return &rp->stats; | 
 | } | 
 |  | 
 | static void rhine_set_rx_mode(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 | 	u32 mc_filter[2];	/* Multicast hash filter */ | 
 | 	u8 rx_mode;		/* Note: 0x02=accept runt, 0x01=accept errs */ | 
 |  | 
 | 	if (dev->flags & IFF_PROMISC) {		/* Set promiscuous. */ | 
 | 		rx_mode = 0x1C; | 
 | 		iowrite32(0xffffffff, ioaddr + MulticastFilter0); | 
 | 		iowrite32(0xffffffff, ioaddr + MulticastFilter1); | 
 | 	} else if ((dev->mc_count > multicast_filter_limit) | 
 | 		   || (dev->flags & IFF_ALLMULTI)) { | 
 | 		/* Too many to match, or accept all multicasts. */ | 
 | 		iowrite32(0xffffffff, ioaddr + MulticastFilter0); | 
 | 		iowrite32(0xffffffff, ioaddr + MulticastFilter1); | 
 | 		rx_mode = 0x0C; | 
 | 	} else { | 
 | 		struct dev_mc_list *mclist; | 
 | 		int i; | 
 | 		memset(mc_filter, 0, sizeof(mc_filter)); | 
 | 		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; | 
 | 		     i++, mclist = mclist->next) { | 
 | 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; | 
 |  | 
 | 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); | 
 | 		} | 
 | 		iowrite32(mc_filter[0], ioaddr + MulticastFilter0); | 
 | 		iowrite32(mc_filter[1], ioaddr + MulticastFilter1); | 
 | 		rx_mode = 0x0C; | 
 | 	} | 
 | 	iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig); | 
 | } | 
 |  | 
 | static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	strcpy(info->driver, DRV_NAME); | 
 | 	strcpy(info->version, DRV_VERSION); | 
 | 	strcpy(info->bus_info, pci_name(rp->pdev)); | 
 | } | 
 |  | 
 | static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int rc; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	rc = mii_ethtool_gset(&rp->mii_if, cmd); | 
 | 	spin_unlock_irq(&rp->lock); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int rc; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	rc = mii_ethtool_sset(&rp->mii_if, cmd); | 
 | 	spin_unlock_irq(&rp->lock); | 
 | 	rhine_set_carrier(&rp->mii_if); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int netdev_nway_reset(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	return mii_nway_restart(&rp->mii_if); | 
 | } | 
 |  | 
 | static u32 netdev_get_link(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	return mii_link_ok(&rp->mii_if); | 
 | } | 
 |  | 
 | static u32 netdev_get_msglevel(struct net_device *dev) | 
 | { | 
 | 	return debug; | 
 | } | 
 |  | 
 | static void netdev_set_msglevel(struct net_device *dev, u32 value) | 
 | { | 
 | 	debug = value; | 
 | } | 
 |  | 
 | static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	if (!(rp->quirks & rqWOL)) | 
 | 		return; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	wol->supported = WAKE_PHY | WAKE_MAGIC | | 
 | 			 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */ | 
 | 	wol->wolopts = rp->wolopts; | 
 | 	spin_unlock_irq(&rp->lock); | 
 | } | 
 |  | 
 | static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	u32 support = WAKE_PHY | WAKE_MAGIC | | 
 | 		      WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */ | 
 |  | 
 | 	if (!(rp->quirks & rqWOL)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (wol->wolopts & ~support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	rp->wolopts = wol->wolopts; | 
 | 	spin_unlock_irq(&rp->lock); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct ethtool_ops netdev_ethtool_ops = { | 
 | 	.get_drvinfo		= netdev_get_drvinfo, | 
 | 	.get_settings		= netdev_get_settings, | 
 | 	.set_settings		= netdev_set_settings, | 
 | 	.nway_reset		= netdev_nway_reset, | 
 | 	.get_link		= netdev_get_link, | 
 | 	.get_msglevel		= netdev_get_msglevel, | 
 | 	.set_msglevel		= netdev_set_msglevel, | 
 | 	.get_wol		= rhine_get_wol, | 
 | 	.set_wol		= rhine_set_wol, | 
 | }; | 
 |  | 
 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	int rc; | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 | 	rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL); | 
 | 	spin_unlock_irq(&rp->lock); | 
 | 	rhine_set_carrier(&rp->mii_if); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int rhine_close(struct net_device *dev) | 
 | { | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	spin_lock_irq(&rp->lock); | 
 |  | 
 | 	netif_stop_queue(dev); | 
 | 	napi_disable(&rp->napi); | 
 |  | 
 | 	if (debug > 1) | 
 | 		printk(KERN_DEBUG "%s: Shutting down ethercard, " | 
 | 		       "status was %4.4x.\n", | 
 | 		       dev->name, ioread16(ioaddr + ChipCmd)); | 
 |  | 
 | 	/* Switch to loopback mode to avoid hardware races. */ | 
 | 	iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig); | 
 |  | 
 | 	/* Disable interrupts by clearing the interrupt mask. */ | 
 | 	iowrite16(0x0000, ioaddr + IntrEnable); | 
 |  | 
 | 	/* Stop the chip's Tx and Rx processes. */ | 
 | 	iowrite16(CmdStop, ioaddr + ChipCmd); | 
 |  | 
 | 	spin_unlock_irq(&rp->lock); | 
 |  | 
 | 	free_irq(rp->pdev->irq, dev); | 
 | 	free_rbufs(dev); | 
 | 	free_tbufs(dev); | 
 | 	free_ring(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static void __devexit rhine_remove_one(struct pci_dev *pdev) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 |  | 
 | 	unregister_netdev(dev); | 
 |  | 
 | 	pci_iounmap(pdev, rp->base); | 
 | 	pci_release_regions(pdev); | 
 |  | 
 | 	free_netdev(dev); | 
 | 	pci_disable_device(pdev); | 
 | 	pci_set_drvdata(pdev, NULL); | 
 | } | 
 |  | 
 | static void rhine_shutdown (struct pci_dev *pdev) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	void __iomem *ioaddr = rp->base; | 
 |  | 
 | 	if (!(rp->quirks & rqWOL)) | 
 | 		return; /* Nothing to do for non-WOL adapters */ | 
 |  | 
 | 	rhine_power_init(dev); | 
 |  | 
 | 	/* Make sure we use pattern 0, 1 and not 4, 5 */ | 
 | 	if (rp->quirks & rq6patterns) | 
 | 		iowrite8(0x04, ioaddr + WOLcgClr); | 
 |  | 
 | 	if (rp->wolopts & WAKE_MAGIC) { | 
 | 		iowrite8(WOLmagic, ioaddr + WOLcrSet); | 
 | 		/* | 
 | 		 * Turn EEPROM-controlled wake-up back on -- some hardware may | 
 | 		 * not cooperate otherwise. | 
 | 		 */ | 
 | 		iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA); | 
 | 	} | 
 |  | 
 | 	if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST)) | 
 | 		iowrite8(WOLbmcast, ioaddr + WOLcgSet); | 
 |  | 
 | 	if (rp->wolopts & WAKE_PHY) | 
 | 		iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet); | 
 |  | 
 | 	if (rp->wolopts & WAKE_UCAST) | 
 | 		iowrite8(WOLucast, ioaddr + WOLcrSet); | 
 |  | 
 | 	if (rp->wolopts) { | 
 | 		/* Enable legacy WOL (for old motherboards) */ | 
 | 		iowrite8(0x01, ioaddr + PwcfgSet); | 
 | 		iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW); | 
 | 	} | 
 |  | 
 | 	/* Hit power state D3 (sleep) */ | 
 | 	if (!avoid_D3) | 
 | 		iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); | 
 |  | 
 | 	/* TODO: Check use of pci_enable_wake() */ | 
 |  | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int rhine_suspend(struct pci_dev *pdev, pm_message_t state) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return 0; | 
 |  | 
 | 	napi_disable(&rp->napi); | 
 |  | 
 | 	netif_device_detach(dev); | 
 | 	pci_save_state(pdev); | 
 |  | 
 | 	spin_lock_irqsave(&rp->lock, flags); | 
 | 	rhine_shutdown(pdev); | 
 | 	spin_unlock_irqrestore(&rp->lock, flags); | 
 |  | 
 | 	free_irq(dev->irq, dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int rhine_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 | 	struct rhine_private *rp = netdev_priv(dev); | 
 | 	unsigned long flags; | 
 | 	int ret; | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return 0; | 
 |  | 
 |         if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev)) | 
 | 		printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name); | 
 |  | 
 | 	ret = pci_set_power_state(pdev, PCI_D0); | 
 | 	if (debug > 1) | 
 | 		printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n", | 
 | 			dev->name, ret ? "failed" : "succeeded", ret); | 
 |  | 
 | 	pci_restore_state(pdev); | 
 |  | 
 | 	spin_lock_irqsave(&rp->lock, flags); | 
 | #ifdef USE_MMIO | 
 | 	enable_mmio(rp->pioaddr, rp->quirks); | 
 | #endif | 
 | 	rhine_power_init(dev); | 
 | 	free_tbufs(dev); | 
 | 	free_rbufs(dev); | 
 | 	alloc_tbufs(dev); | 
 | 	alloc_rbufs(dev); | 
 | 	init_registers(dev); | 
 | 	spin_unlock_irqrestore(&rp->lock, flags); | 
 |  | 
 | 	netif_device_attach(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static struct pci_driver rhine_driver = { | 
 | 	.name		= DRV_NAME, | 
 | 	.id_table	= rhine_pci_tbl, | 
 | 	.probe		= rhine_init_one, | 
 | 	.remove		= __devexit_p(rhine_remove_one), | 
 | #ifdef CONFIG_PM | 
 | 	.suspend	= rhine_suspend, | 
 | 	.resume		= rhine_resume, | 
 | #endif /* CONFIG_PM */ | 
 | 	.shutdown =	rhine_shutdown, | 
 | }; | 
 |  | 
 | static struct dmi_system_id __initdata rhine_dmi_table[] = { | 
 | 	{ | 
 | 		.ident = "EPIA-M", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), | 
 | 			DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "KV7", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), | 
 | 			DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), | 
 | 		}, | 
 | 	}, | 
 | 	{ NULL } | 
 | }; | 
 |  | 
 | static int __init rhine_init(void) | 
 | { | 
 | /* when a module, this is printed whether or not devices are found in probe */ | 
 | #ifdef MODULE | 
 | 	printk(version); | 
 | #endif | 
 | 	if (dmi_check_system(rhine_dmi_table)) { | 
 | 		/* these BIOSes fail at PXE boot if chip is in D3 */ | 
 | 		avoid_D3 = 1; | 
 | 		printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 " | 
 | 				    "enabled.\n", | 
 | 		       DRV_NAME); | 
 | 	} | 
 | 	else if (avoid_D3) | 
 | 		printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME); | 
 |  | 
 | 	return pci_register_driver(&rhine_driver); | 
 | } | 
 |  | 
 |  | 
 | static void __exit rhine_cleanup(void) | 
 | { | 
 | 	pci_unregister_driver(&rhine_driver); | 
 | } | 
 |  | 
 |  | 
 | module_init(rhine_init); | 
 | module_exit(rhine_cleanup); |