| /* | 
 |  * LCD panel support for the TI LDP board | 
 |  * | 
 |  * Copyright (C) 2007 WindRiver | 
 |  * Author: Stanley Miao <stanley.miao@windriver.com> | 
 |  * | 
 |  * Derived from drivers/video/omap/lcd-2430sdp.c | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms of the GNU General Public License as published by the | 
 |  * Free Software Foundation; either version 2 of the License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along | 
 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/i2c/twl.h> | 
 |  | 
 | #include <mach/gpio.h> | 
 | #include <plat/mux.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | #include "omapfb.h" | 
 |  | 
 | #define LCD_PANEL_BACKLIGHT_GPIO	(15 + OMAP_MAX_GPIO_LINES) | 
 | #define LCD_PANEL_ENABLE_GPIO		(7 + OMAP_MAX_GPIO_LINES) | 
 |  | 
 | #define LCD_PANEL_RESET_GPIO		55 | 
 | #define LCD_PANEL_QVGA_GPIO		56 | 
 |  | 
 | #ifdef CONFIG_FB_OMAP_LCD_VGA | 
 | #define LCD_XRES		480 | 
 | #define LCD_YRES		640 | 
 | #define LCD_PIXCLOCK_MAX	41700 | 
 | #else | 
 | #define LCD_XRES		240 | 
 | #define LCD_YRES		320 | 
 | #define LCD_PIXCLOCK_MAX	185186 | 
 | #endif | 
 |  | 
 | #define PM_RECEIVER             TWL4030_MODULE_PM_RECEIVER | 
 | #define ENABLE_VAUX2_DEDICATED  0x09 | 
 | #define ENABLE_VAUX2_DEV_GRP    0x20 | 
 | #define ENABLE_VAUX3_DEDICATED	0x03 | 
 | #define ENABLE_VAUX3_DEV_GRP	0x20 | 
 |  | 
 | #define ENABLE_VPLL2_DEDICATED          0x05 | 
 | #define ENABLE_VPLL2_DEV_GRP            0xE0 | 
 | #define TWL4030_VPLL2_DEV_GRP           0x33 | 
 | #define TWL4030_VPLL2_DEDICATED         0x36 | 
 |  | 
 | #define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) | 
 |  | 
 |  | 
 | static int ldp_panel_init(struct lcd_panel *panel, | 
 | 				struct omapfb_device *fbdev) | 
 | { | 
 | 	gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset"); | 
 | 	gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); | 
 | 	gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel"); | 
 | 	gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight"); | 
 |  | 
 | 	gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0); | 
 | 	gpio_direction_output(LCD_PANEL_RESET_GPIO, 0); | 
 | 	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); | 
 | 	gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0); | 
 |  | 
 | #ifdef CONFIG_FB_OMAP_LCD_VGA | 
 | 	gpio_set_value(LCD_PANEL_QVGA_GPIO, 0); | 
 | #else | 
 | 	gpio_set_value(LCD_PANEL_QVGA_GPIO, 1); | 
 | #endif | 
 | 	gpio_set_value(LCD_PANEL_RESET_GPIO, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ldp_panel_cleanup(struct lcd_panel *panel) | 
 | { | 
 | 	gpio_free(LCD_PANEL_BACKLIGHT_GPIO); | 
 | 	gpio_free(LCD_PANEL_ENABLE_GPIO); | 
 | 	gpio_free(LCD_PANEL_QVGA_GPIO); | 
 | 	gpio_free(LCD_PANEL_RESET_GPIO); | 
 | } | 
 |  | 
 | static int ldp_panel_enable(struct lcd_panel *panel) | 
 | { | 
 | 	if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, | 
 | 			TWL4030_VPLL2_DEDICATED)) | 
 | 		return -EIO; | 
 | 	if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, | 
 | 			TWL4030_VPLL2_DEV_GRP)) | 
 | 		return -EIO; | 
 |  | 
 | 	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); | 
 | 	gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1); | 
 |  | 
 | 	if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEDICATED, | 
 | 				TWL4030_VAUX3_DEDICATED)) | 
 | 		return -EIO; | 
 | 	if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEV_GRP, | 
 | 				TWL4030_VAUX3_DEV_GRP)) | 
 | 		return -EIO; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ldp_panel_disable(struct lcd_panel *panel) | 
 | { | 
 | 	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); | 
 | 	gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0); | 
 |  | 
 | 	t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); | 
 | 	t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); | 
 | 	msleep(4); | 
 | } | 
 |  | 
 | static unsigned long ldp_panel_get_caps(struct lcd_panel *panel) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct lcd_panel ldp_panel = { | 
 | 	.name		= "ldp", | 
 | 	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | | 
 | 			  OMAP_LCDC_INV_HSYNC, | 
 |  | 
 | 	.bpp		= 16, | 
 | 	.data_lines	= 18, | 
 | 	.x_res		= LCD_XRES, | 
 | 	.y_res		= LCD_YRES, | 
 | 	.hsw		= 3,		/* hsync_len (4) - 1 */ | 
 | 	.hfp		= 3,		/* right_margin (4) - 1 */ | 
 | 	.hbp		= 39,		/* left_margin (40) - 1 */ | 
 | 	.vsw		= 1,		/* vsync_len (2) - 1 */ | 
 | 	.vfp		= 2,		/* lower_margin */ | 
 | 	.vbp		= 7,		/* upper_margin (8) - 1 */ | 
 |  | 
 | 	.pixel_clock	= LCD_PIXCLOCK_MAX, | 
 |  | 
 | 	.init		= ldp_panel_init, | 
 | 	.cleanup	= ldp_panel_cleanup, | 
 | 	.enable		= ldp_panel_enable, | 
 | 	.disable	= ldp_panel_disable, | 
 | 	.get_caps	= ldp_panel_get_caps, | 
 | }; | 
 |  | 
 | static int ldp_panel_probe(struct platform_device *pdev) | 
 | { | 
 | 	omapfb_register_panel(&ldp_panel); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ldp_panel_remove(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ldp_panel_suspend(struct platform_device *pdev, pm_message_t mesg) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ldp_panel_resume(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct platform_driver ldp_panel_driver = { | 
 | 	.probe		= ldp_panel_probe, | 
 | 	.remove		= ldp_panel_remove, | 
 | 	.suspend	= ldp_panel_suspend, | 
 | 	.resume		= ldp_panel_resume, | 
 | 	.driver		= { | 
 | 		.name	= "ldp_lcd", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init ldp_panel_drv_init(void) | 
 | { | 
 | 	return platform_driver_register(&ldp_panel_driver); | 
 | } | 
 |  | 
 | static void __exit ldp_panel_drv_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&ldp_panel_driver); | 
 | } | 
 |  | 
 | module_init(ldp_panel_drv_init); | 
 | module_exit(ldp_panel_drv_exit); |