| /* | 
 |  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds | 
 |  * | 
 |  * This file contains the PC-specific time handling details: | 
 |  * reading the RTC at bootup, etc.. | 
 |  * 1994-07-02    Alan Modra | 
 |  *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime | 
 |  * 1995-03-26    Markus Kuhn | 
 |  *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 | 
 |  *      precision CMOS clock update | 
 |  * 1996-05-03    Ingo Molnar | 
 |  *      fixed time warps in do_[slow|fast]_gettimeoffset() | 
 |  * 1997-09-10	Updated NTP code according to technical memorandum Jan '96 | 
 |  *		"A Kernel Model for Precision Timekeeping" by Dave Mills | 
 |  * 1998-09-05    (Various) | 
 |  *	More robust do_fast_gettimeoffset() algorithm implemented | 
 |  *	(works with APM, Cyrix 6x86MX and Centaur C6), | 
 |  *	monotonic gettimeofday() with fast_get_timeoffset(), | 
 |  *	drift-proof precision TSC calibration on boot | 
 |  *	(C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D. | 
 |  *	Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>; | 
 |  *	ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>). | 
 |  * 1998-12-16    Andrea Arcangeli | 
 |  *	Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy | 
 |  *	because was not accounting lost_ticks. | 
 |  * 1998-12-24 Copyright (C) 1998  Andrea Arcangeli | 
 |  *	Fixed a xtime SMP race (we need the xtime_lock rw spinlock to | 
 |  *	serialize accesses to xtime/lost_ticks). | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/time.h> | 
 | #include <linux/mca.h> | 
 |  | 
 | #include <asm/setup.h> | 
 | #include <asm/hpet.h> | 
 | #include <asm/time.h> | 
 | #include <asm/timer.h> | 
 |  | 
 | #include <asm/do_timer.h> | 
 |  | 
 | int timer_ack; | 
 |  | 
 | unsigned long profile_pc(struct pt_regs *regs) | 
 | { | 
 | 	unsigned long pc = instruction_pointer(regs); | 
 |  | 
 | #ifdef CONFIG_SMP | 
 | 	if (!user_mode_vm(regs) && in_lock_functions(pc)) { | 
 | #ifdef CONFIG_FRAME_POINTER | 
 | 		return *(unsigned long *)(regs->bp + sizeof(long)); | 
 | #else | 
 | 		unsigned long *sp = (unsigned long *)®s->sp; | 
 |  | 
 | 		/* Return address is either directly at stack pointer | 
 | 		   or above a saved flags. Eflags has bits 22-31 zero, | 
 | 		   kernel addresses don't. */ | 
 | 		if (sp[0] >> 22) | 
 | 			return sp[0]; | 
 | 		if (sp[1] >> 22) | 
 | 			return sp[1]; | 
 | #endif | 
 | 	} | 
 | #endif | 
 | 	return pc; | 
 | } | 
 | EXPORT_SYMBOL(profile_pc); | 
 |  | 
 | /* | 
 |  * This is the same as the above, except we _also_ save the current | 
 |  * Time Stamp Counter value at the time of the timer interrupt, so that | 
 |  * we later on can estimate the time of day more exactly. | 
 |  */ | 
 | irqreturn_t timer_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	/* Keep nmi watchdog up to date */ | 
 | 	inc_irq_stat(irq0_irqs); | 
 |  | 
 | #ifdef CONFIG_X86_IO_APIC | 
 | 	if (timer_ack) { | 
 | 		/* | 
 | 		 * Subtle, when I/O APICs are used we have to ack timer IRQ | 
 | 		 * manually to deassert NMI lines for the watchdog if run | 
 | 		 * on an 82489DX-based system. | 
 | 		 */ | 
 | 		spin_lock(&i8259A_lock); | 
 | 		outb(0x0c, PIC_MASTER_OCW3); | 
 | 		/* Ack the IRQ; AEOI will end it automatically. */ | 
 | 		inb(PIC_MASTER_POLL); | 
 | 		spin_unlock(&i8259A_lock); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	do_timer_interrupt_hook(); | 
 |  | 
 | #ifdef CONFIG_MCA | 
 | 	if (MCA_bus) { | 
 | 		/* The PS/2 uses level-triggered interrupts.  You can't | 
 | 		turn them off, nor would you want to (any attempt to | 
 | 		enable edge-triggered interrupts usually gets intercepted by a | 
 | 		special hardware circuit).  Hence we have to acknowledge | 
 | 		the timer interrupt.  Through some incredibly stupid | 
 | 		design idea, the reset for IRQ 0 is done by setting the | 
 | 		high bit of the PPI port B (0x61).  Note that some PS/2s, | 
 | 		notably the 55SX, work fine if this is removed.  */ | 
 |  | 
 | 		u8 irq_v = inb_p(0x61);		/* read the current state */ | 
 | 		outb_p(irq_v | 0x80, 0x61);	/* reset the IRQ */ | 
 | 	} | 
 | #endif | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* Duplicate of time_init() below, with hpet_enable part added */ | 
 | void __init hpet_time_init(void) | 
 | { | 
 | 	if (!hpet_enable()) | 
 | 		setup_pit_timer(); | 
 | 	x86_quirk_time_init(); | 
 | } | 
 |  | 
 | /* | 
 |  * This is called directly from init code; we must delay timer setup in the | 
 |  * HPET case as we can't make the decision to turn on HPET this early in the | 
 |  * boot process. | 
 |  * | 
 |  * The chosen time_init function will usually be hpet_time_init, above, but | 
 |  * in the case of virtual hardware, an alternative function may be substituted. | 
 |  */ | 
 | void __init time_init(void) | 
 | { | 
 | 	x86_quirk_pre_time_init(); | 
 | 	tsc_init(); | 
 | 	late_time_init = choose_time_init(); | 
 | } |