remove init of dev->perm_addr in drivers
perm_addr is initialized correctly in register_netdevice() so to init it in
drivers is no longer needed.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 5bffd97..efca14e 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -247,8 +247,7 @@
* @net_dev: the net device to get address for
*
* Older SiS900 and friends, use EEPROM to store MAC address.
- * MAC address is read from read_eeprom() into @net_dev->dev_addr and
- * @net_dev->perm_addr.
+ * MAC address is read from read_eeprom() into @net_dev->dev_addr.
*/
static int sis900_get_mac_addr(struct pci_dev *pci_dev,
@@ -271,9 +270,6 @@
for (i = 0; i < 3; i++)
((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
- /* Store MAC Address in perm_addr */
- memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
-
return 1;
}
@@ -284,8 +280,7 @@
*
* SiS630E model, use APC CMOS RAM to store MAC address.
* APC CMOS RAM is accessed through ISA bridge.
- * MAC address is read into @net_dev->dev_addr and
- * @net_dev->perm_addr.
+ * MAC address is read into @net_dev->dev_addr.
*/
static int sis630e_get_mac_addr(struct pci_dev *pci_dev,
@@ -311,9 +306,6 @@
((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
}
- /* Store MAC Address in perm_addr */
- memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
-
pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
pci_dev_put(isa_bridge);
@@ -328,7 +320,7 @@
*
* SiS635 model, set MAC Reload Bit to load Mac address from APC
* to rfdr. rfdr is accessed through rfcr. MAC address is read into
- * @net_dev->dev_addr and @net_dev->perm_addr.
+ * @net_dev->dev_addr.
*/
static int sis635_get_mac_addr(struct pci_dev *pci_dev,
@@ -353,9 +345,6 @@
*( ((u16 *)net_dev->dev_addr) + i) = sr16(rfdr);
}
- /* Store MAC Address in perm_addr */
- memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
-
/* enable packet filtering */
sw32(rfcr, rfcrSave | RFEN);
@@ -375,7 +364,7 @@
* EEDONE signal to refuse EEPROM access by LAN.
* The EEPROM map of SiS962 or SiS963 is different to SiS900.
* The signature field in SiS962 or SiS963 spec is meaningless.
- * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
+ * MAC address is read into @net_dev->dev_addr.
*/
static int sis96x_get_mac_addr(struct pci_dev *pci_dev,
@@ -395,9 +384,6 @@
for (i = 0; i < 3; i++)
mac[i] = read_eeprom(ioaddr, i + EEPROMMACAddr);
- /* Store MAC Address in perm_addr */
- memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
-
rc = 1;
break;
}