| /* |
| * arch/s390/kernel/head31.S |
| * |
| * Copyright (C) IBM Corp. 2005,2006 |
| * |
| * Author(s): Hartmut Penner <hp@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Rob van der Heij <rvdhei@iae.nl> |
| * Heiko Carstens <heiko.carstens@de.ibm.com> |
| * |
| */ |
| |
| # |
| # startup-code at 0x10000, running in absolute addressing mode |
| # this is called either by the ipl loader or directly by PSW restart |
| # or linload or SALIPL |
| # |
| .org 0x10000 |
| startup:basr %r13,0 # get base |
| .LPG0: l %r13,0f-.LPG0(%r13) |
| b 0(%r13) |
| 0: .long startup_continue |
| |
| # |
| # params at 10400 (setup.h) |
| # |
| .org PARMAREA |
| .long 0,0 # IPL_DEVICE |
| .long 0,0 # INITRD_START |
| .long 0,0 # INITRD_SIZE |
| |
| .org COMMAND_LINE |
| .byte "root=/dev/ram0 ro" |
| .byte 0 |
| |
| .org 0x11000 |
| |
| startup_continue: |
| basr %r13,0 # get base |
| .LPG1: mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0) |
| lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers |
| l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area |
| # move IPL device to lowcore |
| mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) |
| # |
| # Setup stack |
| # |
| l %r15,.Linittu-.LPG1(%r13) |
| mvc __LC_CURRENT(4),__TI_task(%r15) |
| ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE |
| st %r15,__LC_KERNEL_STACK # set end of kernel stack |
| ahi %r15,-96 |
| xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain |
| # |
| # Save ipl parameters, clear bss memory, initialize storage key for kernel pages, |
| # and create a kernel NSS if the SAVESYS= parm is defined |
| # |
| l %r14,.Lstartup_init-.LPG1(%r13) |
| basr %r14,%r14 |
| lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, |
| # virtual and never return ... |
| .align 8 |
| .Lentry:.long 0x00080000,0x80000000 + _stext |
| .Lctl: .long 0x04b50002 # cr0: various things |
| .long 0 # cr1: primary space segment table |
| .long .Lduct # cr2: dispatchable unit control table |
| .long 0 # cr3: instruction authorization |
| .long 0 # cr4: instruction authorization |
| .long .Lduct # cr5: primary-aste origin |
| .long 0 # cr6: I/O interrupts |
| .long 0 # cr7: secondary space segment table |
| .long 0 # cr8: access registers translation |
| .long 0 # cr9: tracing off |
| .long 0 # cr10: tracing off |
| .long 0 # cr11: tracing off |
| .long 0 # cr12: tracing off |
| .long 0 # cr13: home space segment table |
| .long 0xc0000000 # cr14: machine check handling off |
| .long 0 # cr15: linkage stack operations |
| .Lmchunk:.long memory_chunk |
| .Lbss_bgn: .long __bss_start |
| .Lbss_end: .long _end |
| .Lparmaddr: .long PARMAREA |
| .Linittu: .long init_thread_union |
| .Lstartup_init: |
| .long startup_init |
| .align 64 |
| .Lduct: .long 0,0,0,0,.Lduald,0,0,0 |
| .long 0,0,0,0,0,0,0,0 |
| .align 128 |
| .Lduald:.rept 8 |
| .long 0x80000000,0,0,0 # invalid access-list entries |
| .endr |
| |
| .org 0x12000 |
| .globl _ehead |
| _ehead: |
| #ifdef CONFIG_SHARED_KERNEL |
| .org 0x100000 |
| #endif |
| |
| # |
| # startup-code, running in absolute addressing mode |
| # |
| .globl _stext |
| _stext: basr %r13,0 # get base |
| .LPG3: |
| # check control registers |
| stctl %c0,%c15,0(%r15) |
| oi 2(%r15),0x40 # enable sigp emergency signal |
| oi 0(%r15),0x10 # switch on low address protection |
| lctl %c0,%c15,0(%r15) |
| |
| # |
| lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess |
| l %r14,.Lstart-.LPG3(%r13) |
| basr %r14,%r14 # call start_kernel |
| # |
| # We returned from start_kernel ?!? PANIK |
| # |
| basr %r13,0 |
| lpsw .Ldw-.(%r13) # load disabled wait psw |
| # |
| .align 8 |
| .Ldw: .long 0x000a0000,0x00000000 |
| .Lstart:.long start_kernel |
| .Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 |