|  | /* | 
|  | * High-level sync()-related operations | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/linkage.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/buffer_head.h> | 
|  | #include "internal.h" | 
|  |  | 
|  | #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ | 
|  | SYNC_FILE_RANGE_WAIT_AFTER) | 
|  |  | 
|  | /* | 
|  | * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0) | 
|  | * just dirties buffers with inodes so we have to submit IO for these buffers | 
|  | * via __sync_blockdev(). This also speeds up the wait == 1 case since in that | 
|  | * case write_inode() functions do sync_dirty_buffer() and thus effectively | 
|  | * write one block at a time. | 
|  | */ | 
|  | static int __sync_filesystem(struct super_block *sb, int wait) | 
|  | { | 
|  | /* Avoid doing twice syncing and cache pruning for quota sync */ | 
|  | if (!wait) | 
|  | writeout_quota_sb(sb, -1); | 
|  | else | 
|  | sync_quota_sb(sb, -1); | 
|  | sync_inodes_sb(sb, wait); | 
|  | if (sb->s_op->sync_fs) | 
|  | sb->s_op->sync_fs(sb, wait); | 
|  | return __sync_blockdev(sb->s_bdev, wait); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write out and wait upon all dirty data associated with this | 
|  | * superblock.  Filesystem data as well as the underlying block | 
|  | * device.  Takes the superblock lock. | 
|  | */ | 
|  | int sync_filesystem(struct super_block *sb) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * We need to be protected against the filesystem going from | 
|  | * r/o to r/w or vice versa. | 
|  | */ | 
|  | WARN_ON(!rwsem_is_locked(&sb->s_umount)); | 
|  |  | 
|  | /* | 
|  | * No point in syncing out anything if the filesystem is read-only. | 
|  | */ | 
|  | if (sb->s_flags & MS_RDONLY) | 
|  | return 0; | 
|  |  | 
|  | ret = __sync_filesystem(sb, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return __sync_filesystem(sb, 1); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(sync_filesystem); | 
|  |  | 
|  | /* | 
|  | * Sync all the data for all the filesystems (called by sys_sync() and | 
|  | * emergency sync) | 
|  | * | 
|  | * This operation is careful to avoid the livelock which could easily happen | 
|  | * if two or more filesystems are being continuously dirtied.  s_need_sync | 
|  | * is used only here.  We set it against all filesystems and then clear it as | 
|  | * we sync them.  So redirtied filesystems are skipped. | 
|  | * | 
|  | * But if process A is currently running sync_filesystems and then process B | 
|  | * calls sync_filesystems as well, process B will set all the s_need_sync | 
|  | * flags again, which will cause process A to resync everything.  Fix that with | 
|  | * a local mutex. | 
|  | */ | 
|  | static void sync_filesystems(int wait) | 
|  | { | 
|  | struct super_block *sb; | 
|  | static DEFINE_MUTEX(mutex); | 
|  |  | 
|  | mutex_lock(&mutex);		/* Could be down_interruptible */ | 
|  | spin_lock(&sb_lock); | 
|  | list_for_each_entry(sb, &super_blocks, s_list) | 
|  | sb->s_need_sync = 1; | 
|  |  | 
|  | restart: | 
|  | list_for_each_entry(sb, &super_blocks, s_list) { | 
|  | if (!sb->s_need_sync) | 
|  | continue; | 
|  | sb->s_need_sync = 0; | 
|  | sb->s_count++; | 
|  | spin_unlock(&sb_lock); | 
|  |  | 
|  | down_read(&sb->s_umount); | 
|  | if (!(sb->s_flags & MS_RDONLY) && sb->s_root) | 
|  | __sync_filesystem(sb, wait); | 
|  | up_read(&sb->s_umount); | 
|  |  | 
|  | /* restart only when sb is no longer on the list */ | 
|  | spin_lock(&sb_lock); | 
|  | if (__put_super_and_need_restart(sb)) | 
|  | goto restart; | 
|  | } | 
|  | spin_unlock(&sb_lock); | 
|  | mutex_unlock(&mutex); | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE0(sync) | 
|  | { | 
|  | sync_filesystems(0); | 
|  | sync_filesystems(1); | 
|  | if (unlikely(laptop_mode)) | 
|  | laptop_sync_completion(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void do_sync_work(struct work_struct *work) | 
|  | { | 
|  | /* | 
|  | * Sync twice to reduce the possibility we skipped some inodes / pages | 
|  | * because they were temporarily locked | 
|  | */ | 
|  | sync_filesystems(0); | 
|  | sync_filesystems(0); | 
|  | printk("Emergency Sync complete\n"); | 
|  | kfree(work); | 
|  | } | 
|  |  | 
|  | void emergency_sync(void) | 
|  | { | 
|  | struct work_struct *work; | 
|  |  | 
|  | work = kmalloc(sizeof(*work), GFP_ATOMIC); | 
|  | if (work) { | 
|  | INIT_WORK(work, do_sync_work); | 
|  | schedule_work(work); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Generic function to fsync a file. | 
|  | * | 
|  | * filp may be NULL if called via the msync of a vma. | 
|  | */ | 
|  | int file_fsync(struct file *filp, struct dentry *dentry, int datasync) | 
|  | { | 
|  | struct inode * inode = dentry->d_inode; | 
|  | struct super_block * sb; | 
|  | int ret, err; | 
|  |  | 
|  | /* sync the inode to buffers */ | 
|  | ret = write_inode_now(inode, 0); | 
|  |  | 
|  | /* sync the superblock to buffers */ | 
|  | sb = inode->i_sb; | 
|  | if (sb->s_dirt && sb->s_op->write_super) | 
|  | sb->s_op->write_super(sb); | 
|  |  | 
|  | /* .. finally sync the buffers to disk */ | 
|  | err = sync_blockdev(sb->s_bdev); | 
|  | if (!ret) | 
|  | ret = err; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vfs_fsync - perform a fsync or fdatasync on a file | 
|  | * @file:		file to sync | 
|  | * @dentry:		dentry of @file | 
|  | * @data:		only perform a fdatasync operation | 
|  | * | 
|  | * Write back data and metadata for @file to disk.  If @datasync is | 
|  | * set only metadata needed to access modified file data is written. | 
|  | * | 
|  | * In case this function is called from nfsd @file may be %NULL and | 
|  | * only @dentry is set.  This can only happen when the filesystem | 
|  | * implements the export_operations API. | 
|  | */ | 
|  | int vfs_fsync(struct file *file, struct dentry *dentry, int datasync) | 
|  | { | 
|  | const struct file_operations *fop; | 
|  | struct address_space *mapping; | 
|  | int err, ret; | 
|  |  | 
|  | /* | 
|  | * Get mapping and operations from the file in case we have | 
|  | * as file, or get the default values for them in case we | 
|  | * don't have a struct file available.  Damn nfsd.. | 
|  | */ | 
|  | if (file) { | 
|  | mapping = file->f_mapping; | 
|  | fop = file->f_op; | 
|  | } else { | 
|  | mapping = dentry->d_inode->i_mapping; | 
|  | fop = dentry->d_inode->i_fop; | 
|  | } | 
|  |  | 
|  | if (!fop || !fop->fsync) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = filemap_fdatawrite(mapping); | 
|  |  | 
|  | /* | 
|  | * We need to protect against concurrent writers, which could cause | 
|  | * livelocks in fsync_buffers_list(). | 
|  | */ | 
|  | mutex_lock(&mapping->host->i_mutex); | 
|  | err = fop->fsync(file, dentry, datasync); | 
|  | if (!ret) | 
|  | ret = err; | 
|  | mutex_unlock(&mapping->host->i_mutex); | 
|  | err = filemap_fdatawait(mapping); | 
|  | if (!ret) | 
|  | ret = err; | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(vfs_fsync); | 
|  |  | 
|  | static int do_fsync(unsigned int fd, int datasync) | 
|  | { | 
|  | struct file *file; | 
|  | int ret = -EBADF; | 
|  |  | 
|  | file = fget(fd); | 
|  | if (file) { | 
|  | ret = vfs_fsync(file, file->f_path.dentry, datasync); | 
|  | fput(file); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE1(fsync, unsigned int, fd) | 
|  | { | 
|  | return do_fsync(fd, 0); | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE1(fdatasync, unsigned int, fd) | 
|  | { | 
|  | return do_fsync(fd, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sys_sync_file_range() permits finely controlled syncing over a segment of | 
|  | * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is | 
|  | * zero then sys_sync_file_range() will operate from offset out to EOF. | 
|  | * | 
|  | * The flag bits are: | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range | 
|  | * before performing the write. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the | 
|  | * range which are not presently under writeback. Note that this may block for | 
|  | * significant periods due to exhaustion of disk request structures. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range | 
|  | * after performing the write. | 
|  | * | 
|  | * Useful combinations of the flag bits are: | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages | 
|  | * in the range which were dirty on entry to sys_sync_file_range() are placed | 
|  | * under writeout.  This is a start-write-for-data-integrity operation. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which | 
|  | * are not presently under writeout.  This is an asynchronous flush-to-disk | 
|  | * operation.  Not suitable for data integrity operations. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for | 
|  | * completion of writeout of all pages in the range.  This will be used after an | 
|  | * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait | 
|  | * for that operation to complete and to return the result. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER: | 
|  | * a traditional sync() operation.  This is a write-for-data-integrity operation | 
|  | * which will ensure that all pages in the range which were dirty on entry to | 
|  | * sys_sync_file_range() are committed to disk. | 
|  | * | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any | 
|  | * I/O errors or ENOSPC conditions and will return those to the caller, after | 
|  | * clearing the EIO and ENOSPC flags in the address_space. | 
|  | * | 
|  | * It should be noted that none of these operations write out the file's | 
|  | * metadata.  So unless the application is strictly performing overwrites of | 
|  | * already-instantiated disk blocks, there are no guarantees here that the data | 
|  | * will be available after a crash. | 
|  | */ | 
|  | SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes, | 
|  | unsigned int flags) | 
|  | { | 
|  | int ret; | 
|  | struct file *file; | 
|  | loff_t endbyte;			/* inclusive */ | 
|  | int fput_needed; | 
|  | umode_t i_mode; | 
|  |  | 
|  | ret = -EINVAL; | 
|  | if (flags & ~VALID_FLAGS) | 
|  | goto out; | 
|  |  | 
|  | endbyte = offset + nbytes; | 
|  |  | 
|  | if ((s64)offset < 0) | 
|  | goto out; | 
|  | if ((s64)endbyte < 0) | 
|  | goto out; | 
|  | if (endbyte < offset) | 
|  | goto out; | 
|  |  | 
|  | if (sizeof(pgoff_t) == 4) { | 
|  | if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) { | 
|  | /* | 
|  | * The range starts outside a 32 bit machine's | 
|  | * pagecache addressing capabilities.  Let it "succeed" | 
|  | */ | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  | if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) { | 
|  | /* | 
|  | * Out to EOF | 
|  | */ | 
|  | nbytes = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (nbytes == 0) | 
|  | endbyte = LLONG_MAX; | 
|  | else | 
|  | endbyte--;		/* inclusive */ | 
|  |  | 
|  | ret = -EBADF; | 
|  | file = fget_light(fd, &fput_needed); | 
|  | if (!file) | 
|  | goto out; | 
|  |  | 
|  | i_mode = file->f_path.dentry->d_inode->i_mode; | 
|  | ret = -ESPIPE; | 
|  | if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) && | 
|  | !S_ISLNK(i_mode)) | 
|  | goto out_put; | 
|  |  | 
|  | ret = do_sync_mapping_range(file->f_mapping, offset, endbyte, flags); | 
|  | out_put: | 
|  | fput_light(file, fput_needed); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  | #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS | 
|  | asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes, | 
|  | long flags) | 
|  | { | 
|  | return SYSC_sync_file_range((int) fd, offset, nbytes, | 
|  | (unsigned int) flags); | 
|  | } | 
|  | SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range); | 
|  | #endif | 
|  |  | 
|  | /* It would be nice if people remember that not all the world's an i386 | 
|  | when they introduce new system calls */ | 
|  | SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags, | 
|  | loff_t offset, loff_t nbytes) | 
|  | { | 
|  | return sys_sync_file_range(fd, offset, nbytes, flags); | 
|  | } | 
|  | #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS | 
|  | asmlinkage long SyS_sync_file_range2(long fd, long flags, | 
|  | loff_t offset, loff_t nbytes) | 
|  | { | 
|  | return SYSC_sync_file_range2((int) fd, (unsigned int) flags, | 
|  | offset, nbytes); | 
|  | } | 
|  | SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * `endbyte' is inclusive | 
|  | */ | 
|  | int do_sync_mapping_range(struct address_space *mapping, loff_t offset, | 
|  | loff_t endbyte, unsigned int flags) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!mapping) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { | 
|  | ret = wait_on_page_writeback_range(mapping, | 
|  | offset >> PAGE_CACHE_SHIFT, | 
|  | endbyte >> PAGE_CACHE_SHIFT); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (flags & SYNC_FILE_RANGE_WRITE) { | 
|  | ret = __filemap_fdatawrite_range(mapping, offset, endbyte, | 
|  | WB_SYNC_ALL); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (flags & SYNC_FILE_RANGE_WAIT_AFTER) { | 
|  | ret = wait_on_page_writeback_range(mapping, | 
|  | offset >> PAGE_CACHE_SHIFT, | 
|  | endbyte >> PAGE_CACHE_SHIFT); | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(do_sync_mapping_range); |