|  | /* | 
|  | * pci.c - Low-Level PCI Access in IA-64 | 
|  | * | 
|  | * Derived from bios32.c of i386 tree. | 
|  | * | 
|  | * (c) Copyright 2002, 2005 Hewlett-Packard Development Company, L.P. | 
|  | *	David Mosberger-Tang <davidm@hpl.hp.com> | 
|  | *	Bjorn Helgaas <bjorn.helgaas@hp.com> | 
|  | * Copyright (C) 2004 Silicon Graphics, Inc. | 
|  | * | 
|  | * Note: Above list of copyright holders is incomplete... | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/smp_lock.h> | 
|  | #include <linux/spinlock.h> | 
|  |  | 
|  | #include <asm/machvec.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/sal.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/hw_irq.h> | 
|  |  | 
|  | /* | 
|  | * Low-level SAL-based PCI configuration access functions. Note that SAL | 
|  | * calls are already serialized (via sal_lock), so we don't need another | 
|  | * synchronization mechanism here. | 
|  | */ | 
|  |  | 
|  | #define PCI_SAL_ADDRESS(seg, bus, devfn, reg)		\ | 
|  | (((u64) seg << 24) | (bus << 16) | (devfn << 8) | (reg)) | 
|  |  | 
|  | /* SAL 3.2 adds support for extended config space. */ | 
|  |  | 
|  | #define PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg)	\ | 
|  | (((u64) seg << 28) | (bus << 20) | (devfn << 12) | (reg)) | 
|  |  | 
|  | static int | 
|  | pci_sal_read (unsigned int seg, unsigned int bus, unsigned int devfn, | 
|  | int reg, int len, u32 *value) | 
|  | { | 
|  | u64 addr, data = 0; | 
|  | int mode, result; | 
|  |  | 
|  | if (!value || (seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((seg | reg) <= 255) { | 
|  | addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); | 
|  | mode = 0; | 
|  | } else { | 
|  | addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); | 
|  | mode = 1; | 
|  | } | 
|  | result = ia64_sal_pci_config_read(addr, mode, len, &data); | 
|  | if (result != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | *value = (u32) data; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | pci_sal_write (unsigned int seg, unsigned int bus, unsigned int devfn, | 
|  | int reg, int len, u32 value) | 
|  | { | 
|  | u64 addr; | 
|  | int mode, result; | 
|  |  | 
|  | if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((seg | reg) <= 255) { | 
|  | addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); | 
|  | mode = 0; | 
|  | } else { | 
|  | addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); | 
|  | mode = 1; | 
|  | } | 
|  | result = ia64_sal_pci_config_write(addr, mode, len, value); | 
|  | if (result != 0) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pci_raw_ops pci_sal_ops = { | 
|  | .read =		pci_sal_read, | 
|  | .write =	pci_sal_write | 
|  | }; | 
|  |  | 
|  | struct pci_raw_ops *raw_pci_ops = &pci_sal_ops; | 
|  |  | 
|  | static int | 
|  | pci_read (struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) | 
|  | { | 
|  | return raw_pci_ops->read(pci_domain_nr(bus), bus->number, | 
|  | devfn, where, size, value); | 
|  | } | 
|  |  | 
|  | static int | 
|  | pci_write (struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) | 
|  | { | 
|  | return raw_pci_ops->write(pci_domain_nr(bus), bus->number, | 
|  | devfn, where, size, value); | 
|  | } | 
|  |  | 
|  | struct pci_ops pci_root_ops = { | 
|  | .read = pci_read, | 
|  | .write = pci_write, | 
|  | }; | 
|  |  | 
|  | /* Called by ACPI when it finds a new root bus.  */ | 
|  |  | 
|  | static struct pci_controller * __devinit | 
|  | alloc_pci_controller (int seg) | 
|  | { | 
|  | struct pci_controller *controller; | 
|  |  | 
|  | controller = kmalloc(sizeof(*controller), GFP_KERNEL); | 
|  | if (!controller) | 
|  | return NULL; | 
|  |  | 
|  | memset(controller, 0, sizeof(*controller)); | 
|  | controller->segment = seg; | 
|  | controller->node = -1; | 
|  | return controller; | 
|  | } | 
|  |  | 
|  | struct pci_root_info { | 
|  | struct pci_controller *controller; | 
|  | char *name; | 
|  | }; | 
|  |  | 
|  | static unsigned int | 
|  | new_space (u64 phys_base, int sparse) | 
|  | { | 
|  | u64 mmio_base; | 
|  | int i; | 
|  |  | 
|  | if (phys_base == 0) | 
|  | return 0;	/* legacy I/O port space */ | 
|  |  | 
|  | mmio_base = (u64) ioremap(phys_base, 0); | 
|  | for (i = 0; i < num_io_spaces; i++) | 
|  | if (io_space[i].mmio_base == mmio_base && | 
|  | io_space[i].sparse == sparse) | 
|  | return i; | 
|  |  | 
|  | if (num_io_spaces == MAX_IO_SPACES) { | 
|  | printk(KERN_ERR "PCI: Too many IO port spaces " | 
|  | "(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES); | 
|  | return ~0; | 
|  | } | 
|  |  | 
|  | i = num_io_spaces++; | 
|  | io_space[i].mmio_base = mmio_base; | 
|  | io_space[i].sparse = sparse; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static u64 __devinit | 
|  | add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr) | 
|  | { | 
|  | struct resource *resource; | 
|  | char *name; | 
|  | u64 base, min, max, base_port; | 
|  | unsigned int sparse = 0, space_nr, len; | 
|  |  | 
|  | resource = kzalloc(sizeof(*resource), GFP_KERNEL); | 
|  | if (!resource) { | 
|  | printk(KERN_ERR "PCI: No memory for %s I/O port space\n", | 
|  | info->name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | len = strlen(info->name) + 32; | 
|  | name = kzalloc(len, GFP_KERNEL); | 
|  | if (!name) { | 
|  | printk(KERN_ERR "PCI: No memory for %s I/O port space name\n", | 
|  | info->name); | 
|  | goto free_resource; | 
|  | } | 
|  |  | 
|  | min = addr->minimum; | 
|  | max = min + addr->address_length - 1; | 
|  | if (addr->info.io.translation_type == ACPI_SPARSE_TRANSLATION) | 
|  | sparse = 1; | 
|  |  | 
|  | space_nr = new_space(addr->translation_offset, sparse); | 
|  | if (space_nr == ~0) | 
|  | goto free_name; | 
|  |  | 
|  | base = __pa(io_space[space_nr].mmio_base); | 
|  | base_port = IO_SPACE_BASE(space_nr); | 
|  | snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->name, | 
|  | base_port + min, base_port + max); | 
|  |  | 
|  | /* | 
|  | * The SDM guarantees the legacy 0-64K space is sparse, but if the | 
|  | * mapping is done by the processor (not the bridge), ACPI may not | 
|  | * mark it as sparse. | 
|  | */ | 
|  | if (space_nr == 0) | 
|  | sparse = 1; | 
|  |  | 
|  | resource->name  = name; | 
|  | resource->flags = IORESOURCE_MEM; | 
|  | resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min); | 
|  | resource->end   = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max); | 
|  | insert_resource(&iomem_resource, resource); | 
|  |  | 
|  | return base_port; | 
|  |  | 
|  | free_name: | 
|  | kfree(name); | 
|  | free_resource: | 
|  | kfree(resource); | 
|  | out: | 
|  | return ~0; | 
|  | } | 
|  |  | 
|  | static acpi_status __devinit resource_to_window(struct acpi_resource *resource, | 
|  | struct acpi_resource_address64 *addr) | 
|  | { | 
|  | acpi_status status; | 
|  |  | 
|  | /* | 
|  | * We're only interested in _CRS descriptors that are | 
|  | *	- address space descriptors for memory or I/O space | 
|  | *	- non-zero size | 
|  | *	- producers, i.e., the address space is routed downstream, | 
|  | *	  not consumed by the bridge itself | 
|  | */ | 
|  | status = acpi_resource_to_address64(resource, addr); | 
|  | if (ACPI_SUCCESS(status) && | 
|  | (addr->resource_type == ACPI_MEMORY_RANGE || | 
|  | addr->resource_type == ACPI_IO_RANGE) && | 
|  | addr->address_length && | 
|  | addr->producer_consumer == ACPI_PRODUCER) | 
|  | return AE_OK; | 
|  |  | 
|  | return AE_ERROR; | 
|  | } | 
|  |  | 
|  | static acpi_status __devinit | 
|  | count_window (struct acpi_resource *resource, void *data) | 
|  | { | 
|  | unsigned int *windows = (unsigned int *) data; | 
|  | struct acpi_resource_address64 addr; | 
|  | acpi_status status; | 
|  |  | 
|  | status = resource_to_window(resource, &addr); | 
|  | if (ACPI_SUCCESS(status)) | 
|  | (*windows)++; | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static __devinit acpi_status add_window(struct acpi_resource *res, void *data) | 
|  | { | 
|  | struct pci_root_info *info = data; | 
|  | struct pci_window *window; | 
|  | struct acpi_resource_address64 addr; | 
|  | acpi_status status; | 
|  | unsigned long flags, offset = 0; | 
|  | struct resource *root; | 
|  |  | 
|  | /* Return AE_OK for non-window resources to keep scanning for more */ | 
|  | status = resource_to_window(res, &addr); | 
|  | if (!ACPI_SUCCESS(status)) | 
|  | return AE_OK; | 
|  |  | 
|  | if (addr.resource_type == ACPI_MEMORY_RANGE) { | 
|  | flags = IORESOURCE_MEM; | 
|  | root = &iomem_resource; | 
|  | offset = addr.translation_offset; | 
|  | } else if (addr.resource_type == ACPI_IO_RANGE) { | 
|  | flags = IORESOURCE_IO; | 
|  | root = &ioport_resource; | 
|  | offset = add_io_space(info, &addr); | 
|  | if (offset == ~0) | 
|  | return AE_OK; | 
|  | } else | 
|  | return AE_OK; | 
|  |  | 
|  | window = &info->controller->window[info->controller->windows++]; | 
|  | window->resource.name = info->name; | 
|  | window->resource.flags = flags; | 
|  | window->resource.start = addr.minimum + offset; | 
|  | window->resource.end = window->resource.start + addr.address_length - 1; | 
|  | window->resource.child = NULL; | 
|  | window->offset = offset; | 
|  |  | 
|  | if (insert_resource(root, &window->resource)) { | 
|  | printk(KERN_ERR "alloc 0x%lx-0x%lx from %s for %s failed\n", | 
|  | window->resource.start, window->resource.end, | 
|  | root->name, info->name); | 
|  | } | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static void __devinit | 
|  | pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) | 
|  | { | 
|  | int i, j; | 
|  |  | 
|  | j = 0; | 
|  | for (i = 0; i < ctrl->windows; i++) { | 
|  | struct resource *res = &ctrl->window[i].resource; | 
|  | /* HP's firmware has a hack to work around a Windows bug. | 
|  | * Ignore these tiny memory ranges */ | 
|  | if ((res->flags & IORESOURCE_MEM) && | 
|  | (res->end - res->start < 16)) | 
|  | continue; | 
|  | if (j >= PCI_BUS_NUM_RESOURCES) { | 
|  | printk("Ignoring range [%lx-%lx] (%lx)\n", res->start, | 
|  | res->end, res->flags); | 
|  | continue; | 
|  | } | 
|  | bus->resource[j++] = res; | 
|  | } | 
|  | } | 
|  |  | 
|  | struct pci_bus * __devinit | 
|  | pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) | 
|  | { | 
|  | struct pci_root_info info; | 
|  | struct pci_controller *controller; | 
|  | unsigned int windows = 0; | 
|  | struct pci_bus *pbus; | 
|  | char *name; | 
|  | int pxm; | 
|  |  | 
|  | controller = alloc_pci_controller(domain); | 
|  | if (!controller) | 
|  | goto out1; | 
|  |  | 
|  | controller->acpi_handle = device->handle; | 
|  |  | 
|  | pxm = acpi_get_pxm(controller->acpi_handle); | 
|  | #ifdef CONFIG_NUMA | 
|  | if (pxm >= 0) | 
|  | controller->node = pxm_to_node(pxm); | 
|  | #endif | 
|  |  | 
|  | acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window, | 
|  | &windows); | 
|  | controller->window = kmalloc_node(sizeof(*controller->window) * windows, | 
|  | GFP_KERNEL, controller->node); | 
|  | if (!controller->window) | 
|  | goto out2; | 
|  |  | 
|  | name = kmalloc(16, GFP_KERNEL); | 
|  | if (!name) | 
|  | goto out3; | 
|  |  | 
|  | sprintf(name, "PCI Bus %04x:%02x", domain, bus); | 
|  | info.controller = controller; | 
|  | info.name = name; | 
|  | acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window, | 
|  | &info); | 
|  |  | 
|  | pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller); | 
|  | if (pbus) | 
|  | pcibios_setup_root_windows(pbus, controller); | 
|  |  | 
|  | return pbus; | 
|  |  | 
|  | out3: | 
|  | kfree(controller->window); | 
|  | out2: | 
|  | kfree(controller); | 
|  | out1: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void pcibios_resource_to_bus(struct pci_dev *dev, | 
|  | struct pci_bus_region *region, struct resource *res) | 
|  | { | 
|  | struct pci_controller *controller = PCI_CONTROLLER(dev); | 
|  | unsigned long offset = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < controller->windows; i++) { | 
|  | struct pci_window *window = &controller->window[i]; | 
|  | if (!(window->resource.flags & res->flags)) | 
|  | continue; | 
|  | if (window->resource.start > res->start) | 
|  | continue; | 
|  | if (window->resource.end < res->end) | 
|  | continue; | 
|  | offset = window->offset; | 
|  | break; | 
|  | } | 
|  |  | 
|  | region->start = res->start - offset; | 
|  | region->end = res->end - offset; | 
|  | } | 
|  | EXPORT_SYMBOL(pcibios_resource_to_bus); | 
|  |  | 
|  | void pcibios_bus_to_resource(struct pci_dev *dev, | 
|  | struct resource *res, struct pci_bus_region *region) | 
|  | { | 
|  | struct pci_controller *controller = PCI_CONTROLLER(dev); | 
|  | unsigned long offset = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < controller->windows; i++) { | 
|  | struct pci_window *window = &controller->window[i]; | 
|  | if (!(window->resource.flags & res->flags)) | 
|  | continue; | 
|  | if (window->resource.start - window->offset > region->start) | 
|  | continue; | 
|  | if (window->resource.end - window->offset < region->end) | 
|  | continue; | 
|  | offset = window->offset; | 
|  | break; | 
|  | } | 
|  |  | 
|  | res->start = region->start + offset; | 
|  | res->end = region->end + offset; | 
|  | } | 
|  | EXPORT_SYMBOL(pcibios_bus_to_resource); | 
|  |  | 
|  | static int __devinit is_valid_resource(struct pci_dev *dev, int idx) | 
|  | { | 
|  | unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; | 
|  | struct resource *devr = &dev->resource[idx]; | 
|  |  | 
|  | if (!dev->bus) | 
|  | return 0; | 
|  | for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) { | 
|  | struct resource *busr = dev->bus->resource[i]; | 
|  |  | 
|  | if (!busr || ((busr->flags ^ devr->flags) & type_mask)) | 
|  | continue; | 
|  | if ((devr->start) && (devr->start >= busr->start) && | 
|  | (devr->end <= busr->end)) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __devinit | 
|  | pcibios_fixup_resources(struct pci_dev *dev, int start, int limit) | 
|  | { | 
|  | struct pci_bus_region region; | 
|  | int i; | 
|  |  | 
|  | for (i = start; i < limit; i++) { | 
|  | if (!dev->resource[i].flags) | 
|  | continue; | 
|  | region.start = dev->resource[i].start; | 
|  | region.end = dev->resource[i].end; | 
|  | pcibios_bus_to_resource(dev, &dev->resource[i], ®ion); | 
|  | if ((is_valid_resource(dev, i))) | 
|  | pci_claim_resource(dev, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) | 
|  | { | 
|  | pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources); | 
|  |  | 
|  | static void __devinit pcibios_fixup_bridge_resources(struct pci_dev *dev) | 
|  | { | 
|  | pcibios_fixup_resources(dev, PCI_BRIDGE_RESOURCES, PCI_NUM_RESOURCES); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Called after each bus is probed, but before its children are examined. | 
|  | */ | 
|  | void __devinit | 
|  | pcibios_fixup_bus (struct pci_bus *b) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  |  | 
|  | if (b->self) { | 
|  | pci_read_bridge_bases(b); | 
|  | pcibios_fixup_bridge_resources(b->self); | 
|  | } | 
|  | list_for_each_entry(dev, &b->devices, bus_list) | 
|  | pcibios_fixup_device_resources(dev); | 
|  | platform_pci_fixup_bus(b); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | void __devinit | 
|  | pcibios_update_irq (struct pci_dev *dev, int irq) | 
|  | { | 
|  | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); | 
|  |  | 
|  | /* ??? FIXME -- record old value for shutdown.  */ | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | pcibios_enable_resources (struct pci_dev *dev, int mask) | 
|  | { | 
|  | u16 cmd, old_cmd; | 
|  | int idx; | 
|  | struct resource *r; | 
|  | unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM; | 
|  |  | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | old_cmd = cmd; | 
|  | for (idx=0; idx<PCI_NUM_RESOURCES; idx++) { | 
|  | /* Only set up the desired resources.  */ | 
|  | if (!(mask & (1 << idx))) | 
|  | continue; | 
|  |  | 
|  | r = &dev->resource[idx]; | 
|  | if (!(r->flags & type_mask)) | 
|  | continue; | 
|  | if ((idx == PCI_ROM_RESOURCE) && | 
|  | (!(r->flags & IORESOURCE_ROM_ENABLE))) | 
|  | continue; | 
|  | if (!r->start && r->end) { | 
|  | printk(KERN_ERR | 
|  | "PCI: Device %s not available because of resource collisions\n", | 
|  | pci_name(dev)); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | cmd |= PCI_COMMAND_IO; | 
|  | if (r->flags & IORESOURCE_MEM) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | } | 
|  | if (cmd != old_cmd) { | 
|  | printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, cmd); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | pcibios_enable_device (struct pci_dev *dev, int mask) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = pcibios_enable_resources(dev, mask); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return acpi_pci_irq_enable(dev); | 
|  | } | 
|  |  | 
|  | void | 
|  | pcibios_disable_device (struct pci_dev *dev) | 
|  | { | 
|  | if (dev->is_enabled) | 
|  | acpi_pci_irq_disable(dev); | 
|  | } | 
|  |  | 
|  | void | 
|  | pcibios_align_resource (void *data, struct resource *res, | 
|  | resource_size_t size, resource_size_t align) | 
|  | { | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PCI BIOS setup, always defaults to SAL interface | 
|  | */ | 
|  | char * __init | 
|  | pcibios_setup (char *str) | 
|  | { | 
|  | return str; | 
|  | } | 
|  |  | 
|  | int | 
|  | pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma, | 
|  | enum pci_mmap_state mmap_state, int write_combine) | 
|  | { | 
|  | /* | 
|  | * I/O space cannot be accessed via normal processor loads and | 
|  | * stores on this platform. | 
|  | */ | 
|  | if (mmap_state == pci_mmap_io) | 
|  | /* | 
|  | * XXX we could relax this for I/O spaces for which ACPI | 
|  | * indicates that the space is 1-to-1 mapped.  But at the | 
|  | * moment, we don't support multiple PCI address spaces and | 
|  | * the legacy I/O space is not 1-to-1 mapped, so this is moot. | 
|  | */ | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Leave vm_pgoff as-is, the PCI space address is the physical | 
|  | * address on this platform. | 
|  | */ | 
|  | if (write_combine && efi_range_is_wc(vma->vm_start, | 
|  | vma->vm_end - vma->vm_start)) | 
|  | vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); | 
|  | else | 
|  | vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); | 
|  |  | 
|  | if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
|  | vma->vm_end - vma->vm_start, vma->vm_page_prot)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ia64_pci_get_legacy_mem - generic legacy mem routine | 
|  | * @bus: bus to get legacy memory base address for | 
|  | * | 
|  | * Find the base of legacy memory for @bus.  This is typically the first | 
|  | * megabyte of bus address space for @bus or is simply 0 on platforms whose | 
|  | * chipsets support legacy I/O and memory routing.  Returns the base address | 
|  | * or an error pointer if an error occurred. | 
|  | * | 
|  | * This is the ia64 generic version of this routine.  Other platforms | 
|  | * are free to override it with a machine vector. | 
|  | */ | 
|  | char *ia64_pci_get_legacy_mem(struct pci_bus *bus) | 
|  | { | 
|  | return (char *)__IA64_UNCACHED_OFFSET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_mmap_legacy_page_range - map legacy memory space to userland | 
|  | * @bus: bus whose legacy space we're mapping | 
|  | * @vma: vma passed in by mmap | 
|  | * | 
|  | * Map legacy memory space for this device back to userspace using a machine | 
|  | * vector to get the base address. | 
|  | */ | 
|  | int | 
|  | pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma) | 
|  | { | 
|  | unsigned long size = vma->vm_end - vma->vm_start; | 
|  | pgprot_t prot; | 
|  | char *addr; | 
|  |  | 
|  | /* | 
|  | * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt | 
|  | * for more details. | 
|  | */ | 
|  | if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size)) | 
|  | return -EINVAL; | 
|  | prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size, | 
|  | vma->vm_page_prot); | 
|  | if (pgprot_val(prot) != pgprot_val(pgprot_noncached(vma->vm_page_prot))) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr = pci_get_legacy_mem(bus); | 
|  | if (IS_ERR(addr)) | 
|  | return PTR_ERR(addr); | 
|  |  | 
|  | vma->vm_pgoff += (unsigned long)addr >> PAGE_SHIFT; | 
|  | vma->vm_page_prot = prot; | 
|  |  | 
|  | if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
|  | size, vma->vm_page_prot)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ia64_pci_legacy_read - read from legacy I/O space | 
|  | * @bus: bus to read | 
|  | * @port: legacy port value | 
|  | * @val: caller allocated storage for returned value | 
|  | * @size: number of bytes to read | 
|  | * | 
|  | * Simply reads @size bytes from @port and puts the result in @val. | 
|  | * | 
|  | * Again, this (and the write routine) are generic versions that can be | 
|  | * overridden by the platform.  This is necessary on platforms that don't | 
|  | * support legacy I/O routing or that hard fail on legacy I/O timeouts. | 
|  | */ | 
|  | int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) | 
|  | { | 
|  | int ret = size; | 
|  |  | 
|  | switch (size) { | 
|  | case 1: | 
|  | *val = inb(port); | 
|  | break; | 
|  | case 2: | 
|  | *val = inw(port); | 
|  | break; | 
|  | case 4: | 
|  | *val = inl(port); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ia64_pci_legacy_write - perform a legacy I/O write | 
|  | * @bus: bus pointer | 
|  | * @port: port to write | 
|  | * @val: value to write | 
|  | * @size: number of bytes to write from @val | 
|  | * | 
|  | * Simply writes @size bytes of @val to @port. | 
|  | */ | 
|  | int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) | 
|  | { | 
|  | int ret = size; | 
|  |  | 
|  | switch (size) { | 
|  | case 1: | 
|  | outb(val, port); | 
|  | break; | 
|  | case 2: | 
|  | outw(val, port); | 
|  | break; | 
|  | case 4: | 
|  | outl(val, port); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* It's defined in drivers/pci/pci.c */ | 
|  | extern u8 pci_cache_line_size; | 
|  |  | 
|  | /** | 
|  | * set_pci_cacheline_size - determine cacheline size for PCI devices | 
|  | * | 
|  | * We want to use the line-size of the outer-most cache.  We assume | 
|  | * that this line-size is the same for all CPUs. | 
|  | * | 
|  | * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). | 
|  | */ | 
|  | static void __init set_pci_cacheline_size(void) | 
|  | { | 
|  | u64 levels, unique_caches; | 
|  | s64 status; | 
|  | pal_cache_config_info_t cci; | 
|  |  | 
|  | status = ia64_pal_cache_summary(&levels, &unique_caches); | 
|  | if (status != 0) { | 
|  | printk(KERN_ERR "%s: ia64_pal_cache_summary() failed " | 
|  | "(status=%ld)\n", __FUNCTION__, status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | status = ia64_pal_cache_config_info(levels - 1, | 
|  | /* cache_type (data_or_unified)= */ 2, &cci); | 
|  | if (status != 0) { | 
|  | printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed " | 
|  | "(status=%ld)\n", __FUNCTION__, status); | 
|  | return; | 
|  | } | 
|  | pci_cache_line_size = (1 << cci.pcci_line_size) / 4; | 
|  | } | 
|  |  | 
|  | static int __init pcibios_init(void) | 
|  | { | 
|  | set_pci_cacheline_size(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(pcibios_init); |