|  | /* | 
|  | * arch/sh/mm/cache-sh4.c | 
|  | * | 
|  | * Copyright (C) 1999, 2000, 2002  Niibe Yutaka | 
|  | * Copyright (C) 2001 - 2006  Paul Mundt | 
|  | * Copyright (C) 2003  Richard Curnow | 
|  | * | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | */ | 
|  | #include <linux/init.h> | 
|  | #include <linux/mm.h> | 
|  | #include <asm/addrspace.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/processor.h> | 
|  | #include <asm/cache.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/pgalloc.h> | 
|  | #include <asm/mmu_context.h> | 
|  | #include <asm/cacheflush.h> | 
|  |  | 
|  | /* | 
|  | * The maximum number of pages we support up to when doing ranged dcache | 
|  | * flushing. Anything exceeding this will simply flush the dcache in its | 
|  | * entirety. | 
|  | */ | 
|  | #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */ | 
|  |  | 
|  | static void __flush_dcache_segment_1way(unsigned long start, | 
|  | unsigned long extent); | 
|  | static void __flush_dcache_segment_2way(unsigned long start, | 
|  | unsigned long extent); | 
|  | static void __flush_dcache_segment_4way(unsigned long start, | 
|  | unsigned long extent); | 
|  |  | 
|  | static void __flush_cache_4096(unsigned long addr, unsigned long phys, | 
|  | unsigned long exec_offset); | 
|  |  | 
|  | /* | 
|  | * This is initialised here to ensure that it is not placed in the BSS.  If | 
|  | * that were to happen, note that cache_init gets called before the BSS is | 
|  | * cleared, so this would get nulled out which would be hopeless. | 
|  | */ | 
|  | static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = | 
|  | (void (*)(unsigned long, unsigned long))0xdeadbeef; | 
|  |  | 
|  | static void compute_alias(struct cache_info *c) | 
|  | { | 
|  | c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1); | 
|  | c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1; | 
|  | } | 
|  |  | 
|  | static void __init emit_cache_params(void) | 
|  | { | 
|  | printk("PVR=%08x CVR=%08x PRR=%08x\n", | 
|  | ctrl_inl(CCN_PVR), | 
|  | ctrl_inl(CCN_CVR), | 
|  | ctrl_inl(CCN_PRR)); | 
|  | printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", | 
|  | cpu_data->icache.ways, | 
|  | cpu_data->icache.sets, | 
|  | cpu_data->icache.way_incr); | 
|  | printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", | 
|  | cpu_data->icache.entry_mask, | 
|  | cpu_data->icache.alias_mask, | 
|  | cpu_data->icache.n_aliases); | 
|  | printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", | 
|  | cpu_data->dcache.ways, | 
|  | cpu_data->dcache.sets, | 
|  | cpu_data->dcache.way_incr); | 
|  | printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", | 
|  | cpu_data->dcache.entry_mask, | 
|  | cpu_data->dcache.alias_mask, | 
|  | cpu_data->dcache.n_aliases); | 
|  |  | 
|  | if (!__flush_dcache_segment_fn) | 
|  | panic("unknown number of cache ways\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * SH-4 has virtually indexed and physically tagged cache. | 
|  | */ | 
|  |  | 
|  | /* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */ | 
|  | #define MAX_P3_SEMAPHORES 16 | 
|  |  | 
|  | struct semaphore p3map_sem[MAX_P3_SEMAPHORES]; | 
|  |  | 
|  | void __init p3_cache_init(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | compute_alias(&cpu_data->icache); | 
|  | compute_alias(&cpu_data->dcache); | 
|  |  | 
|  | switch (cpu_data->dcache.ways) { | 
|  | case 1: | 
|  | __flush_dcache_segment_fn = __flush_dcache_segment_1way; | 
|  | break; | 
|  | case 2: | 
|  | __flush_dcache_segment_fn = __flush_dcache_segment_2way; | 
|  | break; | 
|  | case 4: | 
|  | __flush_dcache_segment_fn = __flush_dcache_segment_4way; | 
|  | break; | 
|  | default: | 
|  | __flush_dcache_segment_fn = NULL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | emit_cache_params(); | 
|  |  | 
|  | if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE)) | 
|  | panic("%s failed.", __FUNCTION__); | 
|  |  | 
|  | for (i = 0; i < cpu_data->dcache.n_aliases; i++) | 
|  | sema_init(&p3map_sem[i], 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back the dirty D-caches, but not invalidate them. | 
|  | * | 
|  | * START: Virtual Address (U0, P1, or P3) | 
|  | * SIZE: Size of the region. | 
|  | */ | 
|  | void __flush_wback_region(void *start, int size) | 
|  | { | 
|  | unsigned long v; | 
|  | unsigned long begin, end; | 
|  |  | 
|  | begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | 
|  | end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | 
|  | & ~(L1_CACHE_BYTES-1); | 
|  | for (v = begin; v < end; v+=L1_CACHE_BYTES) { | 
|  | asm volatile("ocbwb	%0" | 
|  | : /* no output */ | 
|  | : "m" (__m(v))); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back the dirty D-caches and invalidate them. | 
|  | * | 
|  | * START: Virtual Address (U0, P1, or P3) | 
|  | * SIZE: Size of the region. | 
|  | */ | 
|  | void __flush_purge_region(void *start, int size) | 
|  | { | 
|  | unsigned long v; | 
|  | unsigned long begin, end; | 
|  |  | 
|  | begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | 
|  | end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | 
|  | & ~(L1_CACHE_BYTES-1); | 
|  | for (v = begin; v < end; v+=L1_CACHE_BYTES) { | 
|  | asm volatile("ocbp	%0" | 
|  | : /* no output */ | 
|  | : "m" (__m(v))); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * No write back please | 
|  | */ | 
|  | void __flush_invalidate_region(void *start, int size) | 
|  | { | 
|  | unsigned long v; | 
|  | unsigned long begin, end; | 
|  |  | 
|  | begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | 
|  | end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | 
|  | & ~(L1_CACHE_BYTES-1); | 
|  | for (v = begin; v < end; v+=L1_CACHE_BYTES) { | 
|  | asm volatile("ocbi	%0" | 
|  | : /* no output */ | 
|  | : "m" (__m(v))); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back the range of D-cache, and purge the I-cache. | 
|  | * | 
|  | * Called from kernel/module.c:sys_init_module and routine for a.out format. | 
|  | */ | 
|  | void flush_icache_range(unsigned long start, unsigned long end) | 
|  | { | 
|  | flush_cache_all(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back the D-cache and purge the I-cache for signal trampoline. | 
|  | * .. which happens to be the same behavior as flush_icache_range(). | 
|  | * So, we simply flush out a line. | 
|  | */ | 
|  | void flush_cache_sigtramp(unsigned long addr) | 
|  | { | 
|  | unsigned long v, index; | 
|  | unsigned long flags; | 
|  | int i; | 
|  |  | 
|  | v = addr & ~(L1_CACHE_BYTES-1); | 
|  | asm volatile("ocbwb	%0" | 
|  | : /* no output */ | 
|  | : "m" (__m(v))); | 
|  |  | 
|  | index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); | 
|  |  | 
|  | local_irq_save(flags); | 
|  | jump_to_P2(); | 
|  |  | 
|  | for (i = 0; i < cpu_data->icache.ways; | 
|  | i++, index += cpu_data->icache.way_incr) | 
|  | ctrl_outl(0, index);	/* Clear out Valid-bit */ | 
|  |  | 
|  | back_to_P1(); | 
|  | wmb(); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | static inline void flush_cache_4096(unsigned long start, | 
|  | unsigned long phys) | 
|  | { | 
|  | unsigned long flags, exec_offset = 0; | 
|  |  | 
|  | /* | 
|  | * All types of SH-4 require PC to be in P2 to operate on the I-cache. | 
|  | * Some types of SH-4 require PC to be in P2 to operate on the D-cache. | 
|  | */ | 
|  | if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || | 
|  | (start < CACHE_OC_ADDRESS_ARRAY)) | 
|  | exec_offset = 0x20000000; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | __flush_cache_4096(start | SH_CACHE_ASSOC, | 
|  | P1SEGADDR(phys), exec_offset); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back & invalidate the D-cache of the page. | 
|  | * (To avoid "alias" issues) | 
|  | */ | 
|  | void flush_dcache_page(struct page *page) | 
|  | { | 
|  | if (test_bit(PG_mapped, &page->flags)) { | 
|  | unsigned long phys = PHYSADDR(page_address(page)); | 
|  | unsigned long addr = CACHE_OC_ADDRESS_ARRAY; | 
|  | int i, n; | 
|  |  | 
|  | /* Loop all the D-cache */ | 
|  | n = cpu_data->dcache.n_aliases; | 
|  | for (i = 0; i < n; i++, addr += PAGE_SIZE) | 
|  | flush_cache_4096(addr, phys); | 
|  | } | 
|  |  | 
|  | wmb(); | 
|  | } | 
|  |  | 
|  | /* TODO: Selective icache invalidation through IC address array.. */ | 
|  | static inline void flush_icache_all(void) | 
|  | { | 
|  | unsigned long flags, ccr; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | jump_to_P2(); | 
|  |  | 
|  | /* Flush I-cache */ | 
|  | ccr = ctrl_inl(CCR); | 
|  | ccr |= CCR_CACHE_ICI; | 
|  | ctrl_outl(ccr, CCR); | 
|  |  | 
|  | /* | 
|  | * back_to_P1() will take care of the barrier for us, don't add | 
|  | * another one! | 
|  | */ | 
|  |  | 
|  | back_to_P1(); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | void flush_dcache_all(void) | 
|  | { | 
|  | (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); | 
|  | wmb(); | 
|  | } | 
|  |  | 
|  | void flush_cache_all(void) | 
|  | { | 
|  | flush_dcache_all(); | 
|  | flush_icache_all(); | 
|  | } | 
|  |  | 
|  | static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, | 
|  | unsigned long end) | 
|  | { | 
|  | unsigned long d = 0, p = start & PAGE_MASK; | 
|  | unsigned long alias_mask = cpu_data->dcache.alias_mask; | 
|  | unsigned long n_aliases = cpu_data->dcache.n_aliases; | 
|  | unsigned long select_bit; | 
|  | unsigned long all_aliases_mask; | 
|  | unsigned long addr_offset; | 
|  | pgd_t *dir; | 
|  | pmd_t *pmd; | 
|  | pud_t *pud; | 
|  | pte_t *pte; | 
|  | int i; | 
|  |  | 
|  | dir = pgd_offset(mm, p); | 
|  | pud = pud_offset(dir, p); | 
|  | pmd = pmd_offset(pud, p); | 
|  | end = PAGE_ALIGN(end); | 
|  |  | 
|  | all_aliases_mask = (1 << n_aliases) - 1; | 
|  |  | 
|  | do { | 
|  | if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) { | 
|  | p &= PMD_MASK; | 
|  | p += PMD_SIZE; | 
|  | pmd++; | 
|  |  | 
|  | continue; | 
|  | } | 
|  |  | 
|  | pte = pte_offset_kernel(pmd, p); | 
|  |  | 
|  | do { | 
|  | unsigned long phys; | 
|  | pte_t entry = *pte; | 
|  |  | 
|  | if (!(pte_val(entry) & _PAGE_PRESENT)) { | 
|  | pte++; | 
|  | p += PAGE_SIZE; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | phys = pte_val(entry) & PTE_PHYS_MASK; | 
|  |  | 
|  | if ((p ^ phys) & alias_mask) { | 
|  | d |= 1 << ((p & alias_mask) >> PAGE_SHIFT); | 
|  | d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT); | 
|  |  | 
|  | if (d == all_aliases_mask) | 
|  | goto loop_exit; | 
|  | } | 
|  |  | 
|  | pte++; | 
|  | p += PAGE_SIZE; | 
|  | } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); | 
|  | pmd++; | 
|  | } while (p < end); | 
|  |  | 
|  | loop_exit: | 
|  | addr_offset = 0; | 
|  | select_bit = 1; | 
|  |  | 
|  | for (i = 0; i < n_aliases; i++) { | 
|  | if (d & select_bit) { | 
|  | (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE); | 
|  | wmb(); | 
|  | } | 
|  |  | 
|  | select_bit <<= 1; | 
|  | addr_offset += PAGE_SIZE; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note : (RPC) since the caches are physically tagged, the only point | 
|  | * of flush_cache_mm for SH-4 is to get rid of aliases from the | 
|  | * D-cache.  The assumption elsewhere, e.g. flush_cache_range, is that | 
|  | * lines can stay resident so long as the virtual address they were | 
|  | * accessed with (hence cache set) is in accord with the physical | 
|  | * address (i.e. tag).  It's no different here.  So I reckon we don't | 
|  | * need to flush the I-cache, since aliases don't matter for that.  We | 
|  | * should try that. | 
|  | * | 
|  | * Caller takes mm->mmap_sem. | 
|  | */ | 
|  | void flush_cache_mm(struct mm_struct *mm) | 
|  | { | 
|  | /* | 
|  | * If cache is only 4k-per-way, there are never any 'aliases'.  Since | 
|  | * the cache is physically tagged, the data can just be left in there. | 
|  | */ | 
|  | if (cpu_data->dcache.n_aliases == 0) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Don't bother groveling around the dcache for the VMA ranges | 
|  | * if there are too many PTEs to make it worthwhile. | 
|  | */ | 
|  | if (mm->nr_ptes >= MAX_DCACHE_PAGES) | 
|  | flush_dcache_all(); | 
|  | else { | 
|  | struct vm_area_struct *vma; | 
|  |  | 
|  | /* | 
|  | * In this case there are reasonably sized ranges to flush, | 
|  | * iterate through the VMA list and take care of any aliases. | 
|  | */ | 
|  | for (vma = mm->mmap; vma; vma = vma->vm_next) | 
|  | __flush_cache_mm(mm, vma->vm_start, vma->vm_end); | 
|  | } | 
|  |  | 
|  | /* Only touch the icache if one of the VMAs has VM_EXEC set. */ | 
|  | if (mm->exec_vm) | 
|  | flush_icache_all(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back and invalidate I/D-caches for the page. | 
|  | * | 
|  | * ADDR: Virtual Address (U0 address) | 
|  | * PFN: Physical page number | 
|  | */ | 
|  | void flush_cache_page(struct vm_area_struct *vma, unsigned long address, | 
|  | unsigned long pfn) | 
|  | { | 
|  | unsigned long phys = pfn << PAGE_SHIFT; | 
|  | unsigned int alias_mask; | 
|  |  | 
|  | alias_mask = cpu_data->dcache.alias_mask; | 
|  |  | 
|  | /* We only need to flush D-cache when we have alias */ | 
|  | if ((address^phys) & alias_mask) { | 
|  | /* Loop 4K of the D-cache */ | 
|  | flush_cache_4096( | 
|  | CACHE_OC_ADDRESS_ARRAY | (address & alias_mask), | 
|  | phys); | 
|  | /* Loop another 4K of the D-cache */ | 
|  | flush_cache_4096( | 
|  | CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask), | 
|  | phys); | 
|  | } | 
|  |  | 
|  | alias_mask = cpu_data->icache.alias_mask; | 
|  | if (vma->vm_flags & VM_EXEC) { | 
|  | /* | 
|  | * Evict entries from the portion of the cache from which code | 
|  | * may have been executed at this address (virtual).  There's | 
|  | * no need to evict from the portion corresponding to the | 
|  | * physical address as for the D-cache, because we know the | 
|  | * kernel has never executed the code through its identity | 
|  | * translation. | 
|  | */ | 
|  | flush_cache_4096( | 
|  | CACHE_IC_ADDRESS_ARRAY | (address & alias_mask), | 
|  | phys); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write back and invalidate D-caches. | 
|  | * | 
|  | * START, END: Virtual Address (U0 address) | 
|  | * | 
|  | * NOTE: We need to flush the _physical_ page entry. | 
|  | * Flushing the cache lines for U0 only isn't enough. | 
|  | * We need to flush for P1 too, which may contain aliases. | 
|  | */ | 
|  | void flush_cache_range(struct vm_area_struct *vma, unsigned long start, | 
|  | unsigned long end) | 
|  | { | 
|  | /* | 
|  | * If cache is only 4k-per-way, there are never any 'aliases'.  Since | 
|  | * the cache is physically tagged, the data can just be left in there. | 
|  | */ | 
|  | if (cpu_data->dcache.n_aliases == 0) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Don't bother with the lookup and alias check if we have a | 
|  | * wide range to cover, just blow away the dcache in its | 
|  | * entirety instead. -- PFM. | 
|  | */ | 
|  | if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES) | 
|  | flush_dcache_all(); | 
|  | else | 
|  | __flush_cache_mm(vma->vm_mm, start, end); | 
|  |  | 
|  | if (vma->vm_flags & VM_EXEC) { | 
|  | /* | 
|  | * TODO: Is this required???  Need to look at how I-cache | 
|  | * coherency is assured when new programs are loaded to see if | 
|  | * this matters. | 
|  | */ | 
|  | flush_icache_all(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * flush_icache_user_range | 
|  | * @vma: VMA of the process | 
|  | * @page: page | 
|  | * @addr: U0 address | 
|  | * @len: length of the range (< page size) | 
|  | */ | 
|  | void flush_icache_user_range(struct vm_area_struct *vma, | 
|  | struct page *page, unsigned long addr, int len) | 
|  | { | 
|  | flush_cache_page(vma, addr, page_to_pfn(page)); | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __flush_cache_4096 | 
|  | * | 
|  | * @addr:  address in memory mapped cache array | 
|  | * @phys:  P1 address to flush (has to match tags if addr has 'A' bit | 
|  | *         set i.e. associative write) | 
|  | * @exec_offset: set to 0x20000000 if flush has to be executed from P2 | 
|  | *               region else 0x0 | 
|  | * | 
|  | * The offset into the cache array implied by 'addr' selects the | 
|  | * 'colour' of the virtual address range that will be flushed.  The | 
|  | * operation (purge/write-back) is selected by the lower 2 bits of | 
|  | * 'phys'. | 
|  | */ | 
|  | static void __flush_cache_4096(unsigned long addr, unsigned long phys, | 
|  | unsigned long exec_offset) | 
|  | { | 
|  | int way_count; | 
|  | unsigned long base_addr = addr; | 
|  | struct cache_info *dcache; | 
|  | unsigned long way_incr; | 
|  | unsigned long a, ea, p; | 
|  | unsigned long temp_pc; | 
|  |  | 
|  | dcache = &cpu_data->dcache; | 
|  | /* Write this way for better assembly. */ | 
|  | way_count = dcache->ways; | 
|  | way_incr = dcache->way_incr; | 
|  |  | 
|  | /* | 
|  | * Apply exec_offset (i.e. branch to P2 if required.). | 
|  | * | 
|  | * FIXME: | 
|  | * | 
|  | *	If I write "=r" for the (temp_pc), it puts this in r6 hence | 
|  | *	trashing exec_offset before it's been added on - why?  Hence | 
|  | *	"=&r" as a 'workaround' | 
|  | */ | 
|  | asm volatile("mov.l 1f, %0\n\t" | 
|  | "add   %1, %0\n\t" | 
|  | "jmp   @%0\n\t" | 
|  | "nop\n\t" | 
|  | ".balign 4\n\t" | 
|  | "1:  .long 2f\n\t" | 
|  | "2:\n" : "=&r" (temp_pc) : "r" (exec_offset)); | 
|  |  | 
|  | /* | 
|  | * We know there will be >=1 iteration, so write as do-while to avoid | 
|  | * pointless nead-of-loop check for 0 iterations. | 
|  | */ | 
|  | do { | 
|  | ea = base_addr + PAGE_SIZE; | 
|  | a = base_addr; | 
|  | p = phys; | 
|  |  | 
|  | do { | 
|  | *(volatile unsigned long *)a = p; | 
|  | /* | 
|  | * Next line: intentionally not p+32, saves an add, p | 
|  | * will do since only the cache tag bits need to | 
|  | * match. | 
|  | */ | 
|  | *(volatile unsigned long *)(a+32) = p; | 
|  | a += 64; | 
|  | p += 64; | 
|  | } while (a < ea); | 
|  |  | 
|  | base_addr += way_incr; | 
|  | } while (--way_count != 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Break the 1, 2 and 4 way variants of this out into separate functions to | 
|  | * avoid nearly all the overhead of having the conditional stuff in the function | 
|  | * bodies (+ the 1 and 2 way cases avoid saving any registers too). | 
|  | */ | 
|  | static void __flush_dcache_segment_1way(unsigned long start, | 
|  | unsigned long extent_per_way) | 
|  | { | 
|  | unsigned long orig_sr, sr_with_bl; | 
|  | unsigned long base_addr; | 
|  | unsigned long way_incr, linesz, way_size; | 
|  | struct cache_info *dcache; | 
|  | register unsigned long a0, a0e; | 
|  |  | 
|  | asm volatile("stc sr, %0" : "=r" (orig_sr)); | 
|  | sr_with_bl = orig_sr | (1<<28); | 
|  | base_addr = ((unsigned long)&empty_zero_page[0]); | 
|  |  | 
|  | /* | 
|  | * The previous code aligned base_addr to 16k, i.e. the way_size of all | 
|  | * existing SH-4 D-caches.  Whilst I don't see a need to have this | 
|  | * aligned to any better than the cache line size (which it will be | 
|  | * anyway by construction), let's align it to at least the way_size of | 
|  | * any existing or conceivable SH-4 D-cache.  -- RPC | 
|  | */ | 
|  | base_addr = ((base_addr >> 16) << 16); | 
|  | base_addr |= start; | 
|  |  | 
|  | dcache = &cpu_data->dcache; | 
|  | linesz = dcache->linesz; | 
|  | way_incr = dcache->way_incr; | 
|  | way_size = dcache->way_size; | 
|  |  | 
|  | a0 = base_addr; | 
|  | a0e = base_addr + extent_per_way; | 
|  | do { | 
|  | asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "ocbi @%0" : : "r" (a0)); | 
|  | a0 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "ocbi @%0" : : "r" (a0)); | 
|  | a0 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "ocbi @%0" : : "r" (a0)); | 
|  | a0 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "ocbi @%0" : : "r" (a0)); | 
|  | asm volatile("ldc %0, sr" : : "r" (orig_sr)); | 
|  | a0 += linesz; | 
|  | } while (a0 < a0e); | 
|  | } | 
|  |  | 
|  | static void __flush_dcache_segment_2way(unsigned long start, | 
|  | unsigned long extent_per_way) | 
|  | { | 
|  | unsigned long orig_sr, sr_with_bl; | 
|  | unsigned long base_addr; | 
|  | unsigned long way_incr, linesz, way_size; | 
|  | struct cache_info *dcache; | 
|  | register unsigned long a0, a1, a0e; | 
|  |  | 
|  | asm volatile("stc sr, %0" : "=r" (orig_sr)); | 
|  | sr_with_bl = orig_sr | (1<<28); | 
|  | base_addr = ((unsigned long)&empty_zero_page[0]); | 
|  |  | 
|  | /* See comment under 1-way above */ | 
|  | base_addr = ((base_addr >> 16) << 16); | 
|  | base_addr |= start; | 
|  |  | 
|  | dcache = &cpu_data->dcache; | 
|  | linesz = dcache->linesz; | 
|  | way_incr = dcache->way_incr; | 
|  | way_size = dcache->way_size; | 
|  |  | 
|  | a0 = base_addr; | 
|  | a1 = a0 + way_incr; | 
|  | a0e = base_addr + extent_per_way; | 
|  | do { | 
|  | asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1" : : | 
|  | "r" (a0), "r" (a1)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1" : : | 
|  | "r" (a0), "r" (a1)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1" : : | 
|  | "r" (a0), "r" (a1)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1" : : | 
|  | "r" (a0), "r" (a1)); | 
|  | asm volatile("ldc %0, sr" : : "r" (orig_sr)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | } while (a0 < a0e); | 
|  | } | 
|  |  | 
|  | static void __flush_dcache_segment_4way(unsigned long start, | 
|  | unsigned long extent_per_way) | 
|  | { | 
|  | unsigned long orig_sr, sr_with_bl; | 
|  | unsigned long base_addr; | 
|  | unsigned long way_incr, linesz, way_size; | 
|  | struct cache_info *dcache; | 
|  | register unsigned long a0, a1, a2, a3, a0e; | 
|  |  | 
|  | asm volatile("stc sr, %0" : "=r" (orig_sr)); | 
|  | sr_with_bl = orig_sr | (1<<28); | 
|  | base_addr = ((unsigned long)&empty_zero_page[0]); | 
|  |  | 
|  | /* See comment under 1-way above */ | 
|  | base_addr = ((base_addr >> 16) << 16); | 
|  | base_addr |= start; | 
|  |  | 
|  | dcache = &cpu_data->dcache; | 
|  | linesz = dcache->linesz; | 
|  | way_incr = dcache->way_incr; | 
|  | way_size = dcache->way_size; | 
|  |  | 
|  | a0 = base_addr; | 
|  | a1 = a0 + way_incr; | 
|  | a2 = a1 + way_incr; | 
|  | a3 = a2 + way_incr; | 
|  | a0e = base_addr + extent_per_way; | 
|  | do { | 
|  | asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "movca.l r0, @%2\n\t" | 
|  | "movca.l r0, @%3\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1\n\t" | 
|  | "ocbi @%2\n\t" | 
|  | "ocbi @%3\n\t" : : | 
|  | "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | a2 += linesz; | 
|  | a3 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "movca.l r0, @%2\n\t" | 
|  | "movca.l r0, @%3\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1\n\t" | 
|  | "ocbi @%2\n\t" | 
|  | "ocbi @%3\n\t" : : | 
|  | "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | a2 += linesz; | 
|  | a3 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "movca.l r0, @%2\n\t" | 
|  | "movca.l r0, @%3\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1\n\t" | 
|  | "ocbi @%2\n\t" | 
|  | "ocbi @%3\n\t" : : | 
|  | "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | a2 += linesz; | 
|  | a3 += linesz; | 
|  | asm volatile("movca.l r0, @%0\n\t" | 
|  | "movca.l r0, @%1\n\t" | 
|  | "movca.l r0, @%2\n\t" | 
|  | "movca.l r0, @%3\n\t" | 
|  | "ocbi @%0\n\t" | 
|  | "ocbi @%1\n\t" | 
|  | "ocbi @%2\n\t" | 
|  | "ocbi @%3\n\t" : : | 
|  | "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | 
|  | asm volatile("ldc %0, sr" : : "r" (orig_sr)); | 
|  | a0 += linesz; | 
|  | a1 += linesz; | 
|  | a2 += linesz; | 
|  | a3 += linesz; | 
|  | } while (a0 < a0e); | 
|  | } |