| /* Pseudo NMI support on sparc64 systems. | 
 |  * | 
 |  * Copyright (C) 2009 David S. Miller <davem@davemloft.net> | 
 |  * | 
 |  * The NMI watchdog support and infrastructure is based almost | 
 |  * entirely upon the x86 NMI support code. | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/param.h> | 
 | #include <linux/init.h> | 
 | #include <linux/percpu.h> | 
 | #include <linux/nmi.h> | 
 | #include <linux/export.h> | 
 | #include <linux/kprobes.h> | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/kdebug.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/smp.h> | 
 |  | 
 | #include <asm/perf_event.h> | 
 | #include <asm/ptrace.h> | 
 | #include <asm/pcr.h> | 
 |  | 
 | #include "kstack.h" | 
 |  | 
 | /* We don't have a real NMI on sparc64, but we can fake one | 
 |  * up using profiling counter overflow interrupts and interrupt | 
 |  * levels. | 
 |  * | 
 |  * The profile overflow interrupts at level 15, so we use | 
 |  * level 14 as our IRQ off level. | 
 |  */ | 
 |  | 
 | static int panic_on_timeout; | 
 |  | 
 | /* nmi_active: | 
 |  * >0: the NMI watchdog is active, but can be disabled | 
 |  * <0: the NMI watchdog has not been set up, and cannot be enabled | 
 |  *  0: the NMI watchdog is disabled, but can be enabled | 
 |  */ | 
 | atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */ | 
 | EXPORT_SYMBOL(nmi_active); | 
 |  | 
 | static unsigned int nmi_hz = HZ; | 
 | static DEFINE_PER_CPU(short, wd_enabled); | 
 | static int endflag __initdata; | 
 |  | 
 | static DEFINE_PER_CPU(unsigned int, last_irq_sum); | 
 | static DEFINE_PER_CPU(long, alert_counter); | 
 | static DEFINE_PER_CPU(int, nmi_touch); | 
 |  | 
 | void touch_nmi_watchdog(void) | 
 | { | 
 | 	if (atomic_read(&nmi_active)) { | 
 | 		int cpu; | 
 |  | 
 | 		for_each_present_cpu(cpu) { | 
 | 			if (per_cpu(nmi_touch, cpu) != 1) | 
 | 				per_cpu(nmi_touch, cpu) = 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	touch_softlockup_watchdog(); | 
 | } | 
 | EXPORT_SYMBOL(touch_nmi_watchdog); | 
 |  | 
 | static void die_nmi(const char *str, struct pt_regs *regs, int do_panic) | 
 | { | 
 | 	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, | 
 | 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) | 
 | 		return; | 
 |  | 
 | 	console_verbose(); | 
 | 	bust_spinlocks(1); | 
 |  | 
 | 	printk(KERN_EMERG "%s", str); | 
 | 	printk(" on CPU%d, ip %08lx, registers:\n", | 
 | 	       smp_processor_id(), regs->tpc); | 
 | 	show_regs(regs); | 
 | 	dump_stack(); | 
 |  | 
 | 	bust_spinlocks(0); | 
 |  | 
 | 	if (do_panic || panic_on_oops) | 
 | 		panic("Non maskable interrupt"); | 
 |  | 
 | 	nmi_exit(); | 
 | 	local_irq_enable(); | 
 | 	do_exit(SIGBUS); | 
 | } | 
 |  | 
 | notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) | 
 | { | 
 | 	unsigned int sum, touched = 0; | 
 | 	void *orig_sp; | 
 |  | 
 | 	clear_softint(1 << irq); | 
 |  | 
 | 	local_cpu_data().__nmi_count++; | 
 |  | 
 | 	nmi_enter(); | 
 |  | 
 | 	orig_sp = set_hardirq_stack(); | 
 |  | 
 | 	if (notify_die(DIE_NMI, "nmi", regs, 0, | 
 | 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) | 
 | 		touched = 1; | 
 | 	else | 
 | 		pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | 
 |  | 
 | 	sum = local_cpu_data().irq0_irqs; | 
 | 	if (__get_cpu_var(nmi_touch)) { | 
 | 		__get_cpu_var(nmi_touch) = 0; | 
 | 		touched = 1; | 
 | 	} | 
 | 	if (!touched && __get_cpu_var(last_irq_sum) == sum) { | 
 | 		__this_cpu_inc(alert_counter); | 
 | 		if (__this_cpu_read(alert_counter) == 30 * nmi_hz) | 
 | 			die_nmi("BUG: NMI Watchdog detected LOCKUP", | 
 | 				regs, panic_on_timeout); | 
 | 	} else { | 
 | 		__get_cpu_var(last_irq_sum) = sum; | 
 | 		__this_cpu_write(alert_counter, 0); | 
 | 	} | 
 | 	if (__get_cpu_var(wd_enabled)) { | 
 | 		pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | 
 | 		pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | 
 | 	} | 
 |  | 
 | 	restore_hardirq_stack(orig_sp); | 
 |  | 
 | 	nmi_exit(); | 
 | } | 
 |  | 
 | static inline unsigned int get_nmi_count(int cpu) | 
 | { | 
 | 	return cpu_data(cpu).__nmi_count; | 
 | } | 
 |  | 
 | static __init void nmi_cpu_busy(void *data) | 
 | { | 
 | 	local_irq_enable_in_hardirq(); | 
 | 	while (endflag == 0) | 
 | 		mb(); | 
 | } | 
 |  | 
 | static void report_broken_nmi(int cpu, int *prev_nmi_count) | 
 | { | 
 | 	printk(KERN_CONT "\n"); | 
 |  | 
 | 	printk(KERN_WARNING | 
 | 		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", | 
 | 			cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); | 
 |  | 
 | 	printk(KERN_WARNING | 
 | 		"Please report this to bugzilla.kernel.org,\n"); | 
 | 	printk(KERN_WARNING | 
 | 		"and attach the output of the 'dmesg' command.\n"); | 
 |  | 
 | 	per_cpu(wd_enabled, cpu) = 0; | 
 | 	atomic_dec(&nmi_active); | 
 | } | 
 |  | 
 | void stop_nmi_watchdog(void *unused) | 
 | { | 
 | 	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | 
 | 	__get_cpu_var(wd_enabled) = 0; | 
 | 	atomic_dec(&nmi_active); | 
 | } | 
 |  | 
 | static int __init check_nmi_watchdog(void) | 
 | { | 
 | 	unsigned int *prev_nmi_count; | 
 | 	int cpu, err; | 
 |  | 
 | 	if (!atomic_read(&nmi_active)) | 
 | 		return 0; | 
 |  | 
 | 	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL); | 
 | 	if (!prev_nmi_count) { | 
 | 		err = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	printk(KERN_INFO "Testing NMI watchdog ... "); | 
 |  | 
 | 	smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); | 
 |  | 
 | 	for_each_possible_cpu(cpu) | 
 | 		prev_nmi_count[cpu] = get_nmi_count(cpu); | 
 | 	local_irq_enable(); | 
 | 	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ | 
 |  | 
 | 	for_each_online_cpu(cpu) { | 
 | 		if (!per_cpu(wd_enabled, cpu)) | 
 | 			continue; | 
 | 		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) | 
 | 			report_broken_nmi(cpu, prev_nmi_count); | 
 | 	} | 
 | 	endflag = 1; | 
 | 	if (!atomic_read(&nmi_active)) { | 
 | 		kfree(prev_nmi_count); | 
 | 		atomic_set(&nmi_active, -1); | 
 | 		err = -ENODEV; | 
 | 		goto error; | 
 | 	} | 
 | 	printk("OK.\n"); | 
 |  | 
 | 	nmi_hz = 1; | 
 |  | 
 | 	kfree(prev_nmi_count); | 
 | 	return 0; | 
 | error: | 
 | 	on_each_cpu(stop_nmi_watchdog, NULL, 1); | 
 | 	return err; | 
 | } | 
 |  | 
 | void start_nmi_watchdog(void *unused) | 
 | { | 
 | 	__get_cpu_var(wd_enabled) = 1; | 
 | 	atomic_inc(&nmi_active); | 
 |  | 
 | 	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | 
 | 	pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | 
 |  | 
 | 	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | 
 | } | 
 |  | 
 | static void nmi_adjust_hz_one(void *unused) | 
 | { | 
 | 	if (!__get_cpu_var(wd_enabled)) | 
 | 		return; | 
 |  | 
 | 	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable); | 
 | 	pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz)); | 
 |  | 
 | 	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable); | 
 | } | 
 |  | 
 | void nmi_adjust_hz(unsigned int new_hz) | 
 | { | 
 | 	nmi_hz = new_hz; | 
 | 	on_each_cpu(nmi_adjust_hz_one, NULL, 1); | 
 | } | 
 | EXPORT_SYMBOL_GPL(nmi_adjust_hz); | 
 |  | 
 | static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p) | 
 | { | 
 | 	on_each_cpu(stop_nmi_watchdog, NULL, 1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct notifier_block nmi_reboot_notifier = { | 
 | 	.notifier_call = nmi_shutdown, | 
 | }; | 
 |  | 
 | int __init nmi_init(void) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	on_each_cpu(start_nmi_watchdog, NULL, 1); | 
 |  | 
 | 	err = check_nmi_watchdog(); | 
 | 	if (!err) { | 
 | 		err = register_reboot_notifier(&nmi_reboot_notifier); | 
 | 		if (err) { | 
 | 			on_each_cpu(stop_nmi_watchdog, NULL, 1); | 
 | 			atomic_set(&nmi_active, -1); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __init setup_nmi_watchdog(char *str) | 
 | { | 
 | 	if (!strncmp(str, "panic", 5)) | 
 | 		panic_on_timeout = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 | __setup("nmi_watchdog=", setup_nmi_watchdog); |