| /* | 
 |  * rrunner.c: Linux driver for the Essential RoadRunner HIPPI board. | 
 |  * | 
 |  * Copyright (C) 1998-2002 by Jes Sorensen, <jes@wildopensource.com>. | 
 |  * | 
 |  * Thanks to Essential Communication for providing us with hardware | 
 |  * and very comprehensive documentation without which I would not have | 
 |  * been able to write this driver. A special thank you to John Gibbon | 
 |  * for sorting out the legal issues, with the NDA, allowing the code to | 
 |  * be released under the GPL. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * Thanks to Jayaram Bhat from ODS/Essential for fixing some of the | 
 |  * stupid bugs in my code. | 
 |  * | 
 |  * Softnet support and various other patches from Val Henson of | 
 |  * ODS/Essential. | 
 |  * | 
 |  * PCI DMA mapping code partly based on work by Francois Romieu. | 
 |  */ | 
 |  | 
 |  | 
 | #define DEBUG 1 | 
 | #define RX_DMA_SKBUFF 1 | 
 | #define PKT_COPY_THRESHOLD 512 | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/hippidevice.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/mm.h> | 
 | #include <net/sock.h> | 
 |  | 
 | #include <asm/system.h> | 
 | #include <asm/cache.h> | 
 | #include <asm/byteorder.h> | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/uaccess.h> | 
 |  | 
 | #define rr_if_busy(dev)     netif_queue_stopped(dev) | 
 | #define rr_if_running(dev)  netif_running(dev) | 
 |  | 
 | #include "rrunner.h" | 
 |  | 
 | #define RUN_AT(x) (jiffies + (x)) | 
 |  | 
 |  | 
 | MODULE_AUTHOR("Jes Sorensen <jes@wildopensource.com>"); | 
 | MODULE_DESCRIPTION("Essential RoadRunner HIPPI driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | static char version[] __devinitdata = "rrunner.c: v0.50 11/11/2002  Jes Sorensen (jes@wildopensource.com)\n"; | 
 |  | 
 | /* | 
 |  * Implementation notes: | 
 |  * | 
 |  * The DMA engine only allows for DMA within physical 64KB chunks of | 
 |  * memory. The current approach of the driver (and stack) is to use | 
 |  * linear blocks of memory for the skbuffs. However, as the data block | 
 |  * is always the first part of the skb and skbs are 2^n aligned so we | 
 |  * are guarantted to get the whole block within one 64KB align 64KB | 
 |  * chunk. | 
 |  * | 
 |  * On the long term, relying on being able to allocate 64KB linear | 
 |  * chunks of memory is not feasible and the skb handling code and the | 
 |  * stack will need to know about I/O vectors or something similar. | 
 |  */ | 
 |  | 
 | /* | 
 |  * These are checked at init time to see if they are at least 256KB | 
 |  * and increased to 256KB if they are not. This is done to avoid ending | 
 |  * up with socket buffers smaller than the MTU size, | 
 |  */ | 
 | extern __u32 sysctl_wmem_max; | 
 | extern __u32 sysctl_rmem_max; | 
 |  | 
 | static int __devinit rr_init_one(struct pci_dev *pdev, | 
 | 	const struct pci_device_id *ent) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	static int version_disp; | 
 | 	u8 pci_latency; | 
 | 	struct rr_private *rrpriv; | 
 | 	void *tmpptr; | 
 | 	dma_addr_t ring_dma; | 
 | 	int ret = -ENOMEM; | 
 |  | 
 | 	dev = alloc_hippi_dev(sizeof(struct rr_private)); | 
 | 	if (!dev) | 
 | 		goto out3; | 
 |  | 
 | 	ret = pci_enable_device(pdev); | 
 | 	if (ret) { | 
 | 		ret = -ENODEV; | 
 | 		goto out2; | 
 | 	} | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 |  | 
 | 	SET_MODULE_OWNER(dev); | 
 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 |  | 
 | 	if (pci_request_regions(pdev, "rrunner")) { | 
 | 		ret = -EIO; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	pci_set_drvdata(pdev, dev); | 
 |  | 
 | 	rrpriv->pci_dev = pdev; | 
 |  | 
 | 	spin_lock_init(&rrpriv->lock); | 
 |  | 
 | 	dev->irq = pdev->irq; | 
 | 	dev->open = &rr_open; | 
 | 	dev->hard_start_xmit = &rr_start_xmit; | 
 | 	dev->stop = &rr_close; | 
 | 	dev->get_stats = &rr_get_stats; | 
 | 	dev->do_ioctl = &rr_ioctl; | 
 |  | 
 | 	dev->base_addr = pci_resource_start(pdev, 0); | 
 |  | 
 | 	/* display version info if adapter is found */ | 
 | 	if (!version_disp) { | 
 | 		/* set display flag to TRUE so that */ | 
 | 		/* we only display this string ONCE */ | 
 | 		version_disp = 1; | 
 | 		printk(version); | 
 | 	} | 
 |  | 
 | 	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); | 
 | 	if (pci_latency <= 0x58){ | 
 | 		pci_latency = 0x58; | 
 | 		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, pci_latency); | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	printk(KERN_INFO "%s: Essential RoadRunner serial HIPPI " | 
 | 	       "at 0x%08lx, irq %i, PCI latency %i\n", dev->name, | 
 | 	       dev->base_addr, dev->irq, pci_latency); | 
 |  | 
 | 	/* | 
 | 	 * Remap the regs into kernel space. | 
 | 	 */ | 
 |  | 
 | 	rrpriv->regs = ioremap(dev->base_addr, 0x1000); | 
 |  | 
 | 	if (!rrpriv->regs){ | 
 | 		printk(KERN_ERR "%s:  Unable to map I/O register, " | 
 | 			"RoadRunner will be disabled.\n", dev->name); | 
 | 		ret = -EIO; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	tmpptr = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma); | 
 | 	rrpriv->tx_ring = tmpptr; | 
 | 	rrpriv->tx_ring_dma = ring_dma; | 
 |  | 
 | 	if (!tmpptr) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	tmpptr = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma); | 
 | 	rrpriv->rx_ring = tmpptr; | 
 | 	rrpriv->rx_ring_dma = ring_dma; | 
 |  | 
 | 	if (!tmpptr) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	tmpptr = pci_alloc_consistent(pdev, EVT_RING_SIZE, &ring_dma); | 
 | 	rrpriv->evt_ring = tmpptr; | 
 | 	rrpriv->evt_ring_dma = ring_dma; | 
 |  | 
 | 	if (!tmpptr) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Don't access any register before this point! | 
 | 	 */ | 
 | #ifdef __BIG_ENDIAN | 
 | 	writel(readl(&rrpriv->regs->HostCtrl) | NO_SWAP, | 
 | 		&rrpriv->regs->HostCtrl); | 
 | #endif | 
 | 	/* | 
 | 	 * Need to add a case for little-endian 64-bit hosts here. | 
 | 	 */ | 
 |  | 
 | 	rr_init(dev); | 
 |  | 
 | 	dev->base_addr = 0; | 
 |  | 
 | 	ret = register_netdev(dev); | 
 | 	if (ret) | 
 | 		goto out; | 
 | 	return 0; | 
 |  | 
 |  out: | 
 | 	if (rrpriv->rx_ring) | 
 | 		pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring, | 
 | 				    rrpriv->rx_ring_dma); | 
 | 	if (rrpriv->tx_ring) | 
 | 		pci_free_consistent(pdev, TX_TOTAL_SIZE, rrpriv->tx_ring, | 
 | 				    rrpriv->tx_ring_dma); | 
 | 	if (rrpriv->regs) | 
 | 		iounmap(rrpriv->regs); | 
 | 	if (pdev) { | 
 | 		pci_release_regions(pdev); | 
 | 		pci_set_drvdata(pdev, NULL); | 
 | 	} | 
 |  out2: | 
 | 	free_netdev(dev); | 
 |  out3: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __devexit rr_remove_one (struct pci_dev *pdev) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (dev) { | 
 | 		struct rr_private *rr = netdev_priv(dev); | 
 |  | 
 | 		if (!(readl(&rr->regs->HostCtrl) & NIC_HALTED)){ | 
 | 			printk(KERN_ERR "%s: trying to unload running NIC\n", | 
 | 			       dev->name); | 
 | 			writel(HALT_NIC, &rr->regs->HostCtrl); | 
 | 		} | 
 |  | 
 | 		pci_free_consistent(pdev, EVT_RING_SIZE, rr->evt_ring, | 
 | 				    rr->evt_ring_dma); | 
 | 		pci_free_consistent(pdev, RX_TOTAL_SIZE, rr->rx_ring, | 
 | 				    rr->rx_ring_dma); | 
 | 		pci_free_consistent(pdev, TX_TOTAL_SIZE, rr->tx_ring, | 
 | 				    rr->tx_ring_dma); | 
 | 		unregister_netdev(dev); | 
 | 		iounmap(rr->regs); | 
 | 		free_netdev(dev); | 
 | 		pci_release_regions(pdev); | 
 | 		pci_disable_device(pdev); | 
 | 		pci_set_drvdata(pdev, NULL); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Commands are considered to be slow, thus there is no reason to | 
 |  * inline this. | 
 |  */ | 
 | static void rr_issue_cmd(struct rr_private *rrpriv, struct cmd *cmd) | 
 | { | 
 | 	struct rr_regs __iomem *regs; | 
 | 	u32 idx; | 
 |  | 
 | 	regs = rrpriv->regs; | 
 | 	/* | 
 | 	 * This is temporary - it will go away in the final version. | 
 | 	 * We probably also want to make this function inline. | 
 | 	 */ | 
 | 	if (readl(®s->HostCtrl) & NIC_HALTED){ | 
 | 		printk("issuing command for halted NIC, code 0x%x, " | 
 | 		       "HostCtrl %08x\n", cmd->code, readl(®s->HostCtrl)); | 
 | 		if (readl(®s->Mode) & FATAL_ERR) | 
 | 			printk("error codes Fail1 %02x, Fail2 %02x\n", | 
 | 			       readl(®s->Fail1), readl(®s->Fail2)); | 
 | 	} | 
 |  | 
 | 	idx = rrpriv->info->cmd_ctrl.pi; | 
 |  | 
 | 	writel(*(u32*)(cmd), ®s->CmdRing[idx]); | 
 | 	wmb(); | 
 |  | 
 | 	idx = (idx - 1) % CMD_RING_ENTRIES; | 
 | 	rrpriv->info->cmd_ctrl.pi = idx; | 
 | 	wmb(); | 
 |  | 
 | 	if (readl(®s->Mode) & FATAL_ERR) | 
 | 		printk("error code %02x\n", readl(®s->Fail1)); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Reset the board in a sensible manner. The NIC is already halted | 
 |  * when we get here and a spin-lock is held. | 
 |  */ | 
 | static int rr_reset(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	struct eeprom *hw = NULL; | 
 | 	u32 start_pc; | 
 | 	int i; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	rr_load_firmware(dev); | 
 |  | 
 | 	writel(0x01000000, ®s->TX_state); | 
 | 	writel(0xff800000, ®s->RX_state); | 
 | 	writel(0, ®s->AssistState); | 
 | 	writel(CLEAR_INTA, ®s->LocalCtrl); | 
 | 	writel(0x01, ®s->BrkPt); | 
 | 	writel(0, ®s->Timer); | 
 | 	writel(0, ®s->TimerRef); | 
 | 	writel(RESET_DMA, ®s->DmaReadState); | 
 | 	writel(RESET_DMA, ®s->DmaWriteState); | 
 | 	writel(0, ®s->DmaWriteHostHi); | 
 | 	writel(0, ®s->DmaWriteHostLo); | 
 | 	writel(0, ®s->DmaReadHostHi); | 
 | 	writel(0, ®s->DmaReadHostLo); | 
 | 	writel(0, ®s->DmaReadLen); | 
 | 	writel(0, ®s->DmaWriteLen); | 
 | 	writel(0, ®s->DmaWriteLcl); | 
 | 	writel(0, ®s->DmaWriteIPchecksum); | 
 | 	writel(0, ®s->DmaReadLcl); | 
 | 	writel(0, ®s->DmaReadIPchecksum); | 
 | 	writel(0, ®s->PciState); | 
 | #if (BITS_PER_LONG == 64) && defined __LITTLE_ENDIAN | 
 | 	writel(SWAP_DATA | PTR64BIT | PTR_WD_SWAP, ®s->Mode); | 
 | #elif (BITS_PER_LONG == 64) | 
 | 	writel(SWAP_DATA | PTR64BIT | PTR_WD_NOSWAP, ®s->Mode); | 
 | #else | 
 | 	writel(SWAP_DATA | PTR32BIT | PTR_WD_NOSWAP, ®s->Mode); | 
 | #endif | 
 |  | 
 | #if 0 | 
 | 	/* | 
 | 	 * Don't worry, this is just black magic. | 
 | 	 */ | 
 | 	writel(0xdf000, ®s->RxBase); | 
 | 	writel(0xdf000, ®s->RxPrd); | 
 | 	writel(0xdf000, ®s->RxCon); | 
 | 	writel(0xce000, ®s->TxBase); | 
 | 	writel(0xce000, ®s->TxPrd); | 
 | 	writel(0xce000, ®s->TxCon); | 
 | 	writel(0, ®s->RxIndPro); | 
 | 	writel(0, ®s->RxIndCon); | 
 | 	writel(0, ®s->RxIndRef); | 
 | 	writel(0, ®s->TxIndPro); | 
 | 	writel(0, ®s->TxIndCon); | 
 | 	writel(0, ®s->TxIndRef); | 
 | 	writel(0xcc000, ®s->pad10[0]); | 
 | 	writel(0, ®s->DrCmndPro); | 
 | 	writel(0, ®s->DrCmndCon); | 
 | 	writel(0, ®s->DwCmndPro); | 
 | 	writel(0, ®s->DwCmndCon); | 
 | 	writel(0, ®s->DwCmndRef); | 
 | 	writel(0, ®s->DrDataPro); | 
 | 	writel(0, ®s->DrDataCon); | 
 | 	writel(0, ®s->DrDataRef); | 
 | 	writel(0, ®s->DwDataPro); | 
 | 	writel(0, ®s->DwDataCon); | 
 | 	writel(0, ®s->DwDataRef); | 
 | #endif | 
 |  | 
 | 	writel(0xffffffff, ®s->MbEvent); | 
 | 	writel(0, ®s->Event); | 
 |  | 
 | 	writel(0, ®s->TxPi); | 
 | 	writel(0, ®s->IpRxPi); | 
 |  | 
 | 	writel(0, ®s->EvtCon); | 
 | 	writel(0, ®s->EvtPrd); | 
 |  | 
 | 	rrpriv->info->evt_ctrl.pi = 0; | 
 |  | 
 | 	for (i = 0; i < CMD_RING_ENTRIES; i++) | 
 | 		writel(0, ®s->CmdRing[i]); | 
 |  | 
 | /* | 
 |  * Why 32 ? is this not cache line size dependent? | 
 |  */ | 
 | 	writel(RBURST_64|WBURST_64, ®s->PciState); | 
 | 	wmb(); | 
 |  | 
 | 	start_pc = rr_read_eeprom_word(rrpriv, &hw->rncd_info.FwStart); | 
 |  | 
 | #if (DEBUG > 1) | 
 | 	printk("%s: Executing firmware at address 0x%06x\n", | 
 | 	       dev->name, start_pc); | 
 | #endif | 
 |  | 
 | 	writel(start_pc + 0x800, ®s->Pc); | 
 | 	wmb(); | 
 | 	udelay(5); | 
 |  | 
 | 	writel(start_pc, ®s->Pc); | 
 | 	wmb(); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Read a string from the EEPROM. | 
 |  */ | 
 | static unsigned int rr_read_eeprom(struct rr_private *rrpriv, | 
 | 				unsigned long offset, | 
 | 				unsigned char *buf, | 
 | 				unsigned long length) | 
 | { | 
 | 	struct rr_regs __iomem *regs = rrpriv->regs; | 
 | 	u32 misc, io, host, i; | 
 |  | 
 | 	io = readl(®s->ExtIo); | 
 | 	writel(0, ®s->ExtIo); | 
 | 	misc = readl(®s->LocalCtrl); | 
 | 	writel(0, ®s->LocalCtrl); | 
 | 	host = readl(®s->HostCtrl); | 
 | 	writel(host | HALT_NIC, ®s->HostCtrl); | 
 | 	mb(); | 
 |  | 
 | 	for (i = 0; i < length; i++){ | 
 | 		writel((EEPROM_BASE + ((offset+i) << 3)), ®s->WinBase); | 
 | 		mb(); | 
 | 		buf[i] = (readl(®s->WinData) >> 24) & 0xff; | 
 | 		mb(); | 
 | 	} | 
 |  | 
 | 	writel(host, ®s->HostCtrl); | 
 | 	writel(misc, ®s->LocalCtrl); | 
 | 	writel(io, ®s->ExtIo); | 
 | 	mb(); | 
 | 	return i; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Shortcut to read one word (4 bytes) out of the EEPROM and convert | 
 |  * it to our CPU byte-order. | 
 |  */ | 
 | static u32 rr_read_eeprom_word(struct rr_private *rrpriv, | 
 | 			    void * offset) | 
 | { | 
 | 	u32 word; | 
 |  | 
 | 	if ((rr_read_eeprom(rrpriv, (unsigned long)offset, | 
 | 			    (char *)&word, 4) == 4)) | 
 | 		return be32_to_cpu(word); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Write a string to the EEPROM. | 
 |  * | 
 |  * This is only called when the firmware is not running. | 
 |  */ | 
 | static unsigned int write_eeprom(struct rr_private *rrpriv, | 
 | 				 unsigned long offset, | 
 | 				 unsigned char *buf, | 
 | 				 unsigned long length) | 
 | { | 
 | 	struct rr_regs __iomem *regs = rrpriv->regs; | 
 | 	u32 misc, io, data, i, j, ready, error = 0; | 
 |  | 
 | 	io = readl(®s->ExtIo); | 
 | 	writel(0, ®s->ExtIo); | 
 | 	misc = readl(®s->LocalCtrl); | 
 | 	writel(ENABLE_EEPROM_WRITE, ®s->LocalCtrl); | 
 | 	mb(); | 
 |  | 
 | 	for (i = 0; i < length; i++){ | 
 | 		writel((EEPROM_BASE + ((offset+i) << 3)), ®s->WinBase); | 
 | 		mb(); | 
 | 		data = buf[i] << 24; | 
 | 		/* | 
 | 		 * Only try to write the data if it is not the same | 
 | 		 * value already. | 
 | 		 */ | 
 | 		if ((readl(®s->WinData) & 0xff000000) != data){ | 
 | 			writel(data, ®s->WinData); | 
 | 			ready = 0; | 
 | 			j = 0; | 
 | 			mb(); | 
 | 			while(!ready){ | 
 | 				udelay(20); | 
 | 				if ((readl(®s->WinData) & 0xff000000) == | 
 | 				    data) | 
 | 					ready = 1; | 
 | 				mb(); | 
 | 				if (j++ > 5000){ | 
 | 					printk("data mismatch: %08x, " | 
 | 					       "WinData %08x\n", data, | 
 | 					       readl(®s->WinData)); | 
 | 					ready = 1; | 
 | 					error = 1; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	writel(misc, ®s->LocalCtrl); | 
 | 	writel(io, ®s->ExtIo); | 
 | 	mb(); | 
 |  | 
 | 	return error; | 
 | } | 
 |  | 
 |  | 
 | static int __init rr_init(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	struct eeprom *hw = NULL; | 
 | 	u32 sram_size, rev; | 
 | 	int i; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	rev = readl(®s->FwRev); | 
 | 	rrpriv->fw_rev = rev; | 
 | 	if (rev > 0x00020024) | 
 | 		printk("  Firmware revision: %i.%i.%i\n", (rev >> 16), | 
 | 		       ((rev >> 8) & 0xff), (rev & 0xff)); | 
 | 	else if (rev >= 0x00020000) { | 
 | 		printk("  Firmware revision: %i.%i.%i (2.0.37 or " | 
 | 		       "later is recommended)\n", (rev >> 16), | 
 | 		       ((rev >> 8) & 0xff), (rev & 0xff)); | 
 | 	}else{ | 
 | 		printk("  Firmware revision too old: %i.%i.%i, please " | 
 | 		       "upgrade to 2.0.37 or later.\n", | 
 | 		       (rev >> 16), ((rev >> 8) & 0xff), (rev & 0xff)); | 
 | 	} | 
 |  | 
 | #if (DEBUG > 2) | 
 | 	printk("  Maximum receive rings %i\n", readl(®s->MaxRxRng)); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Read the hardware address from the eeprom.  The HW address | 
 | 	 * is not really necessary for HIPPI but awfully convenient. | 
 | 	 * The pointer arithmetic to put it in dev_addr is ugly, but | 
 | 	 * Donald Becker does it this way for the GigE version of this | 
 | 	 * card and it's shorter and more portable than any | 
 | 	 * other method I've seen.  -VAL | 
 | 	 */ | 
 |  | 
 | 	*(u16 *)(dev->dev_addr) = | 
 | 	  htons(rr_read_eeprom_word(rrpriv, &hw->manf.BoardULA)); | 
 | 	*(u32 *)(dev->dev_addr+2) = | 
 | 	  htonl(rr_read_eeprom_word(rrpriv, &hw->manf.BoardULA[4])); | 
 |  | 
 | 	printk("  MAC: "); | 
 |  | 
 | 	for (i = 0; i < 5; i++) | 
 | 		printk("%2.2x:", dev->dev_addr[i]); | 
 | 	printk("%2.2x\n", dev->dev_addr[i]); | 
 |  | 
 | 	sram_size = rr_read_eeprom_word(rrpriv, (void *)8); | 
 | 	printk("  SRAM size 0x%06x\n", sram_size); | 
 |  | 
 | 	if (sysctl_rmem_max < 262144){ | 
 | 		printk("  Receive socket buffer limit too low (%i), " | 
 | 		       "setting to 262144\n", sysctl_rmem_max); | 
 | 		sysctl_rmem_max = 262144; | 
 | 	} | 
 |  | 
 | 	if (sysctl_wmem_max < 262144){ | 
 | 		printk("  Transmit socket buffer limit too low (%i), " | 
 | 		       "setting to 262144\n", sysctl_wmem_max); | 
 | 		sysctl_wmem_max = 262144; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int rr_init1(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	unsigned long myjif, flags; | 
 | 	struct cmd cmd; | 
 | 	u32 hostctrl; | 
 | 	int ecode = 0; | 
 | 	short i; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	spin_lock_irqsave(&rrpriv->lock, flags); | 
 |  | 
 | 	hostctrl = readl(®s->HostCtrl); | 
 | 	writel(hostctrl | HALT_NIC | RR_CLEAR_INT, ®s->HostCtrl); | 
 | 	wmb(); | 
 |  | 
 | 	if (hostctrl & PARITY_ERR){ | 
 | 		printk("%s: Parity error halting NIC - this is serious!\n", | 
 | 		       dev->name); | 
 | 		spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 | 		ecode = -EFAULT; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	set_rxaddr(regs, rrpriv->rx_ctrl_dma); | 
 | 	set_infoaddr(regs, rrpriv->info_dma); | 
 |  | 
 | 	rrpriv->info->evt_ctrl.entry_size = sizeof(struct event); | 
 | 	rrpriv->info->evt_ctrl.entries = EVT_RING_ENTRIES; | 
 | 	rrpriv->info->evt_ctrl.mode = 0; | 
 | 	rrpriv->info->evt_ctrl.pi = 0; | 
 | 	set_rraddr(&rrpriv->info->evt_ctrl.rngptr, rrpriv->evt_ring_dma); | 
 |  | 
 | 	rrpriv->info->cmd_ctrl.entry_size = sizeof(struct cmd); | 
 | 	rrpriv->info->cmd_ctrl.entries = CMD_RING_ENTRIES; | 
 | 	rrpriv->info->cmd_ctrl.mode = 0; | 
 | 	rrpriv->info->cmd_ctrl.pi = 15; | 
 |  | 
 | 	for (i = 0; i < CMD_RING_ENTRIES; i++) { | 
 | 		writel(0, ®s->CmdRing[i]); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < TX_RING_ENTRIES; i++) { | 
 | 		rrpriv->tx_ring[i].size = 0; | 
 | 		set_rraddr(&rrpriv->tx_ring[i].addr, 0); | 
 | 		rrpriv->tx_skbuff[i] = NULL; | 
 | 	} | 
 | 	rrpriv->info->tx_ctrl.entry_size = sizeof(struct tx_desc); | 
 | 	rrpriv->info->tx_ctrl.entries = TX_RING_ENTRIES; | 
 | 	rrpriv->info->tx_ctrl.mode = 0; | 
 | 	rrpriv->info->tx_ctrl.pi = 0; | 
 | 	set_rraddr(&rrpriv->info->tx_ctrl.rngptr, rrpriv->tx_ring_dma); | 
 |  | 
 | 	/* | 
 | 	 * Set dirty_tx before we start receiving interrupts, otherwise | 
 | 	 * the interrupt handler might think it is supposed to process | 
 | 	 * tx ints before we are up and running, which may cause a null | 
 | 	 * pointer access in the int handler. | 
 | 	 */ | 
 | 	rrpriv->tx_full = 0; | 
 | 	rrpriv->cur_rx = 0; | 
 | 	rrpriv->dirty_rx = rrpriv->dirty_tx = 0; | 
 |  | 
 | 	rr_reset(dev); | 
 |  | 
 | 	/* Tuning values */ | 
 | 	writel(0x5000, ®s->ConRetry); | 
 | 	writel(0x100, ®s->ConRetryTmr); | 
 | 	writel(0x500000, ®s->ConTmout); | 
 |  	writel(0x60, ®s->IntrTmr); | 
 | 	writel(0x500000, ®s->TxDataMvTimeout); | 
 | 	writel(0x200000, ®s->RxDataMvTimeout); | 
 |  	writel(0x80, ®s->WriteDmaThresh); | 
 |  	writel(0x80, ®s->ReadDmaThresh); | 
 |  | 
 | 	rrpriv->fw_running = 0; | 
 | 	wmb(); | 
 |  | 
 | 	hostctrl &= ~(HALT_NIC | INVALID_INST_B | PARITY_ERR); | 
 | 	writel(hostctrl, ®s->HostCtrl); | 
 | 	wmb(); | 
 |  | 
 | 	spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 	for (i = 0; i < RX_RING_ENTRIES; i++) { | 
 | 		struct sk_buff *skb; | 
 | 		dma_addr_t addr; | 
 |  | 
 | 		rrpriv->rx_ring[i].mode = 0; | 
 | 		skb = alloc_skb(dev->mtu + HIPPI_HLEN, GFP_ATOMIC); | 
 | 		if (!skb) { | 
 | 			printk(KERN_WARNING "%s: Unable to allocate memory " | 
 | 			       "for receive ring - halting NIC\n", dev->name); | 
 | 			ecode = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 | 		rrpriv->rx_skbuff[i] = skb; | 
 | 	        addr = pci_map_single(rrpriv->pci_dev, skb->data, | 
 | 			dev->mtu + HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
 | 		/* | 
 | 		 * Sanity test to see if we conflict with the DMA | 
 | 		 * limitations of the Roadrunner. | 
 | 		 */ | 
 | 		if ((((unsigned long)skb->data) & 0xfff) > ~65320) | 
 | 			printk("skb alloc error\n"); | 
 |  | 
 | 		set_rraddr(&rrpriv->rx_ring[i].addr, addr); | 
 | 		rrpriv->rx_ring[i].size = dev->mtu + HIPPI_HLEN; | 
 | 	} | 
 |  | 
 | 	rrpriv->rx_ctrl[4].entry_size = sizeof(struct rx_desc); | 
 | 	rrpriv->rx_ctrl[4].entries = RX_RING_ENTRIES; | 
 | 	rrpriv->rx_ctrl[4].mode = 8; | 
 | 	rrpriv->rx_ctrl[4].pi = 0; | 
 | 	wmb(); | 
 | 	set_rraddr(&rrpriv->rx_ctrl[4].rngptr, rrpriv->rx_ring_dma); | 
 |  | 
 | 	udelay(1000); | 
 |  | 
 | 	/* | 
 | 	 * Now start the FirmWare. | 
 | 	 */ | 
 | 	cmd.code = C_START_FW; | 
 | 	cmd.ring = 0; | 
 | 	cmd.index = 0; | 
 |  | 
 | 	rr_issue_cmd(rrpriv, &cmd); | 
 |  | 
 | 	/* | 
 | 	 * Give the FirmWare time to chew on the `get running' command. | 
 | 	 */ | 
 | 	myjif = jiffies + 5 * HZ; | 
 | 	while (time_before(jiffies, myjif) && !rrpriv->fw_running) | 
 | 		cpu_relax(); | 
 |  | 
 | 	netif_start_queue(dev); | 
 |  | 
 | 	return ecode; | 
 |  | 
 |  error: | 
 | 	/* | 
 | 	 * We might have gotten here because we are out of memory, | 
 | 	 * make sure we release everything we allocated before failing | 
 | 	 */ | 
 | 	for (i = 0; i < RX_RING_ENTRIES; i++) { | 
 | 		struct sk_buff *skb = rrpriv->rx_skbuff[i]; | 
 |  | 
 | 		if (skb) { | 
 | 	        	pci_unmap_single(rrpriv->pci_dev, | 
 | 					 rrpriv->rx_ring[i].addr.addrlo, | 
 | 					 dev->mtu + HIPPI_HLEN, | 
 | 					 PCI_DMA_FROMDEVICE); | 
 | 			rrpriv->rx_ring[i].size = 0; | 
 | 			set_rraddr(&rrpriv->rx_ring[i].addr, 0); | 
 | 			dev_kfree_skb(skb); | 
 | 			rrpriv->rx_skbuff[i] = NULL; | 
 | 		} | 
 | 	} | 
 | 	return ecode; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * All events are considered to be slow (RX/TX ints do not generate | 
 |  * events) and are handled here, outside the main interrupt handler, | 
 |  * to reduce the size of the handler. | 
 |  */ | 
 | static u32 rr_handle_event(struct net_device *dev, u32 prodidx, u32 eidx) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	u32 tmp; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	while (prodidx != eidx){ | 
 | 		switch (rrpriv->evt_ring[eidx].code){ | 
 | 		case E_NIC_UP: | 
 | 			tmp = readl(®s->FwRev); | 
 | 			printk(KERN_INFO "%s: Firmware revision %i.%i.%i " | 
 | 			       "up and running\n", dev->name, | 
 | 			       (tmp >> 16), ((tmp >> 8) & 0xff), (tmp & 0xff)); | 
 | 			rrpriv->fw_running = 1; | 
 | 			writel(RX_RING_ENTRIES - 1, ®s->IpRxPi); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_LINK_ON: | 
 | 			printk(KERN_INFO "%s: Optical link ON\n", dev->name); | 
 | 			break; | 
 | 		case E_LINK_OFF: | 
 | 			printk(KERN_INFO "%s: Optical link OFF\n", dev->name); | 
 | 			break; | 
 | 		case E_RX_IDLE: | 
 | 			printk(KERN_WARNING "%s: RX data not moving\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_WATCHDOG: | 
 | 			printk(KERN_INFO "%s: The watchdog is here to see " | 
 | 			       "us\n", dev->name); | 
 | 			break; | 
 | 		case E_INTERN_ERR: | 
 | 			printk(KERN_ERR "%s: HIPPI Internal NIC error\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_HOST_ERR: | 
 | 			printk(KERN_ERR "%s: Host software error\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		/* | 
 | 		 * TX events. | 
 | 		 */ | 
 | 		case E_CON_REJ: | 
 | 			printk(KERN_WARNING "%s: Connection rejected\n", | 
 | 			       dev->name); | 
 | 			rrpriv->stats.tx_aborted_errors++; | 
 | 			break; | 
 | 		case E_CON_TMOUT: | 
 | 			printk(KERN_WARNING "%s: Connection timeout\n", | 
 | 			       dev->name); | 
 | 			break; | 
 | 		case E_DISC_ERR: | 
 | 			printk(KERN_WARNING "%s: HIPPI disconnect error\n", | 
 | 			       dev->name); | 
 | 			rrpriv->stats.tx_aborted_errors++; | 
 | 			break; | 
 | 		case E_INT_PRTY: | 
 | 			printk(KERN_ERR "%s: HIPPI Internal Parity error\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_TX_IDLE: | 
 | 			printk(KERN_WARNING "%s: Transmitter idle\n", | 
 | 			       dev->name); | 
 | 			break; | 
 | 		case E_TX_LINK_DROP: | 
 | 			printk(KERN_WARNING "%s: Link lost during transmit\n", | 
 | 			       dev->name); | 
 | 			rrpriv->stats.tx_aborted_errors++; | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_TX_INV_RNG: | 
 | 			printk(KERN_ERR "%s: Invalid send ring block\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_TX_INV_BUF: | 
 | 			printk(KERN_ERR "%s: Invalid send buffer address\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_TX_INV_DSC: | 
 | 			printk(KERN_ERR "%s: Invalid descriptor address\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		/* | 
 | 		 * RX events. | 
 | 		 */ | 
 | 		case E_RX_RNG_OUT: | 
 | 			printk(KERN_INFO "%s: Receive ring full\n", dev->name); | 
 | 			break; | 
 |  | 
 | 		case E_RX_PAR_ERR: | 
 | 			printk(KERN_WARNING "%s: Receive parity error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_RX_LLRC_ERR: | 
 | 			printk(KERN_WARNING "%s: Receive LLRC error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_PKT_LN_ERR: | 
 | 			printk(KERN_WARNING "%s: Receive packet length " | 
 | 			       "error\n", dev->name); | 
 | 			goto drop; | 
 | 		case E_DTA_CKSM_ERR: | 
 | 			printk(KERN_WARNING "%s: Data checksum error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_SHT_BST: | 
 | 			printk(KERN_WARNING "%s: Unexpected short burst " | 
 | 			       "error\n", dev->name); | 
 | 			goto drop; | 
 | 		case E_STATE_ERR: | 
 | 			printk(KERN_WARNING "%s: Recv. state transition" | 
 | 			       " error\n", dev->name); | 
 | 			goto drop; | 
 | 		case E_UNEXP_DATA: | 
 | 			printk(KERN_WARNING "%s: Unexpected data error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_LST_LNK_ERR: | 
 | 			printk(KERN_WARNING "%s: Link lost error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_FRM_ERR: | 
 | 			printk(KERN_WARNING "%s: Framming Error\n", | 
 | 			       dev->name); | 
 | 			goto drop; | 
 | 		case E_FLG_SYN_ERR: | 
 | 			printk(KERN_WARNING "%s: Flag sync. lost during" | 
 | 			       "packet\n", dev->name); | 
 | 			goto drop; | 
 | 		case E_RX_INV_BUF: | 
 | 			printk(KERN_ERR "%s: Invalid receive buffer " | 
 | 			       "address\n", dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_RX_INV_DSC: | 
 | 			printk(KERN_ERR "%s: Invalid receive descriptor " | 
 | 			       "address\n", dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		case E_RNG_BLK: | 
 | 			printk(KERN_ERR "%s: Invalid ring block\n", | 
 | 			       dev->name); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			wmb(); | 
 | 			break; | 
 | 		drop: | 
 | 			/* Label packet to be dropped. | 
 | 			 * Actual dropping occurs in rx | 
 | 			 * handling. | 
 | 			 * | 
 | 			 * The index of packet we get to drop is | 
 | 			 * the index of the packet following | 
 | 			 * the bad packet. -kbf | 
 | 			 */ | 
 | 			{ | 
 | 				u16 index = rrpriv->evt_ring[eidx].index; | 
 | 				index = (index + (RX_RING_ENTRIES - 1)) % | 
 | 					RX_RING_ENTRIES; | 
 | 				rrpriv->rx_ring[index].mode |= | 
 | 					(PACKET_BAD | PACKET_END); | 
 | 			} | 
 | 			break; | 
 | 		default: | 
 | 			printk(KERN_WARNING "%s: Unhandled event 0x%02x\n", | 
 | 			       dev->name, rrpriv->evt_ring[eidx].code); | 
 | 		} | 
 | 		eidx = (eidx + 1) % EVT_RING_ENTRIES; | 
 | 	} | 
 |  | 
 | 	rrpriv->info->evt_ctrl.pi = eidx; | 
 | 	wmb(); | 
 | 	return eidx; | 
 | } | 
 |  | 
 |  | 
 | static void rx_int(struct net_device *dev, u32 rxlimit, u32 index) | 
 | { | 
 | 	struct rr_private *rrpriv = netdev_priv(dev); | 
 | 	struct rr_regs __iomem *regs = rrpriv->regs; | 
 |  | 
 | 	do { | 
 | 		struct rx_desc *desc; | 
 | 		u32 pkt_len; | 
 |  | 
 | 		desc = &(rrpriv->rx_ring[index]); | 
 | 		pkt_len = desc->size; | 
 | #if (DEBUG > 2) | 
 | 		printk("index %i, rxlimit %i\n", index, rxlimit); | 
 | 		printk("len %x, mode %x\n", pkt_len, desc->mode); | 
 | #endif | 
 | 		if ( (rrpriv->rx_ring[index].mode & PACKET_BAD) == PACKET_BAD){ | 
 | 			rrpriv->stats.rx_dropped++; | 
 | 			goto defer; | 
 | 		} | 
 |  | 
 | 		if (pkt_len > 0){ | 
 | 			struct sk_buff *skb, *rx_skb; | 
 |  | 
 | 			rx_skb = rrpriv->rx_skbuff[index]; | 
 |  | 
 | 			if (pkt_len < PKT_COPY_THRESHOLD) { | 
 | 				skb = alloc_skb(pkt_len, GFP_ATOMIC); | 
 | 				if (skb == NULL){ | 
 | 					printk(KERN_WARNING "%s: Unable to allocate skb (%i bytes), deferring packet\n", dev->name, pkt_len); | 
 | 					rrpriv->stats.rx_dropped++; | 
 | 					goto defer; | 
 | 				} else { | 
 | 					pci_dma_sync_single_for_cpu(rrpriv->pci_dev, | 
 | 								    desc->addr.addrlo, | 
 | 								    pkt_len, | 
 | 								    PCI_DMA_FROMDEVICE); | 
 |  | 
 | 					memcpy(skb_put(skb, pkt_len), | 
 | 					       rx_skb->data, pkt_len); | 
 |  | 
 | 					pci_dma_sync_single_for_device(rrpriv->pci_dev, | 
 | 								       desc->addr.addrlo, | 
 | 								       pkt_len, | 
 | 								       PCI_DMA_FROMDEVICE); | 
 | 				} | 
 | 			}else{ | 
 | 				struct sk_buff *newskb; | 
 |  | 
 | 				newskb = alloc_skb(dev->mtu + HIPPI_HLEN, | 
 | 					GFP_ATOMIC); | 
 | 				if (newskb){ | 
 | 					dma_addr_t addr; | 
 |  | 
 | 	        			pci_unmap_single(rrpriv->pci_dev, | 
 | 						desc->addr.addrlo, dev->mtu + | 
 | 						HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
 | 					skb = rx_skb; | 
 | 					skb_put(skb, pkt_len); | 
 | 					rrpriv->rx_skbuff[index] = newskb; | 
 | 	        			addr = pci_map_single(rrpriv->pci_dev, | 
 | 						newskb->data, | 
 | 						dev->mtu + HIPPI_HLEN, | 
 | 						PCI_DMA_FROMDEVICE); | 
 | 					set_rraddr(&desc->addr, addr); | 
 | 				} else { | 
 | 					printk("%s: Out of memory, deferring " | 
 | 					       "packet\n", dev->name); | 
 | 					rrpriv->stats.rx_dropped++; | 
 | 					goto defer; | 
 | 				} | 
 | 			} | 
 | 			skb->dev = dev; | 
 | 			skb->protocol = hippi_type_trans(skb, dev); | 
 |  | 
 | 			netif_rx(skb);		/* send it up */ | 
 |  | 
 | 			dev->last_rx = jiffies; | 
 | 			rrpriv->stats.rx_packets++; | 
 | 			rrpriv->stats.rx_bytes += pkt_len; | 
 | 		} | 
 | 	defer: | 
 | 		desc->mode = 0; | 
 | 		desc->size = dev->mtu + HIPPI_HLEN; | 
 |  | 
 | 		if ((index & 7) == 7) | 
 | 			writel(index, ®s->IpRxPi); | 
 |  | 
 | 		index = (index + 1) % RX_RING_ENTRIES; | 
 | 	} while(index != rxlimit); | 
 |  | 
 | 	rrpriv->cur_rx = index; | 
 | 	wmb(); | 
 | } | 
 |  | 
 |  | 
 | static irqreturn_t rr_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	struct net_device *dev = (struct net_device *)dev_id; | 
 | 	u32 prodidx, rxindex, eidx, txcsmr, rxlimit, txcon; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	if (!(readl(®s->HostCtrl) & RR_INT)) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	spin_lock(&rrpriv->lock); | 
 |  | 
 | 	prodidx = readl(®s->EvtPrd); | 
 | 	txcsmr = (prodidx >> 8) & 0xff; | 
 | 	rxlimit = (prodidx >> 16) & 0xff; | 
 | 	prodidx &= 0xff; | 
 |  | 
 | #if (DEBUG > 2) | 
 | 	printk("%s: interrupt, prodidx = %i, eidx = %i\n", dev->name, | 
 | 	       prodidx, rrpriv->info->evt_ctrl.pi); | 
 | #endif | 
 | 	/* | 
 | 	 * Order here is important.  We must handle events | 
 | 	 * before doing anything else in order to catch | 
 | 	 * such things as LLRC errors, etc -kbf | 
 | 	 */ | 
 |  | 
 | 	eidx = rrpriv->info->evt_ctrl.pi; | 
 | 	if (prodidx != eidx) | 
 | 		eidx = rr_handle_event(dev, prodidx, eidx); | 
 |  | 
 | 	rxindex = rrpriv->cur_rx; | 
 | 	if (rxindex != rxlimit) | 
 | 		rx_int(dev, rxlimit, rxindex); | 
 |  | 
 | 	txcon = rrpriv->dirty_tx; | 
 | 	if (txcsmr != txcon) { | 
 | 		do { | 
 | 			/* Due to occational firmware TX producer/consumer out | 
 | 			 * of sync. error need to check entry in ring -kbf | 
 | 			 */ | 
 | 			if(rrpriv->tx_skbuff[txcon]){ | 
 | 				struct tx_desc *desc; | 
 | 				struct sk_buff *skb; | 
 |  | 
 | 				desc = &(rrpriv->tx_ring[txcon]); | 
 | 				skb = rrpriv->tx_skbuff[txcon]; | 
 |  | 
 | 				rrpriv->stats.tx_packets++; | 
 | 				rrpriv->stats.tx_bytes += skb->len; | 
 |  | 
 | 				pci_unmap_single(rrpriv->pci_dev, | 
 | 						 desc->addr.addrlo, skb->len, | 
 | 						 PCI_DMA_TODEVICE); | 
 | 				dev_kfree_skb_irq(skb); | 
 |  | 
 | 				rrpriv->tx_skbuff[txcon] = NULL; | 
 | 				desc->size = 0; | 
 | 				set_rraddr(&rrpriv->tx_ring[txcon].addr, 0); | 
 | 				desc->mode = 0; | 
 | 			} | 
 | 			txcon = (txcon + 1) % TX_RING_ENTRIES; | 
 | 		} while (txcsmr != txcon); | 
 | 		wmb(); | 
 |  | 
 | 		rrpriv->dirty_tx = txcon; | 
 | 		if (rrpriv->tx_full && rr_if_busy(dev) && | 
 | 		    (((rrpriv->info->tx_ctrl.pi + 1) % TX_RING_ENTRIES) | 
 | 		     != rrpriv->dirty_tx)){ | 
 | 			rrpriv->tx_full = 0; | 
 | 			netif_wake_queue(dev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	eidx |= ((txcsmr << 8) | (rxlimit << 16)); | 
 | 	writel(eidx, ®s->EvtCon); | 
 | 	wmb(); | 
 |  | 
 | 	spin_unlock(&rrpriv->lock); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static inline void rr_raz_tx(struct rr_private *rrpriv, | 
 | 			     struct net_device *dev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < TX_RING_ENTRIES; i++) { | 
 | 		struct sk_buff *skb = rrpriv->tx_skbuff[i]; | 
 |  | 
 | 		if (skb) { | 
 | 			struct tx_desc *desc = &(rrpriv->tx_ring[i]); | 
 |  | 
 | 	        	pci_unmap_single(rrpriv->pci_dev, desc->addr.addrlo, | 
 | 				skb->len, PCI_DMA_TODEVICE); | 
 | 			desc->size = 0; | 
 | 			set_rraddr(&desc->addr, 0); | 
 | 			dev_kfree_skb(skb); | 
 | 			rrpriv->tx_skbuff[i] = NULL; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | static inline void rr_raz_rx(struct rr_private *rrpriv, | 
 | 			     struct net_device *dev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < RX_RING_ENTRIES; i++) { | 
 | 		struct sk_buff *skb = rrpriv->rx_skbuff[i]; | 
 |  | 
 | 		if (skb) { | 
 | 			struct rx_desc *desc = &(rrpriv->rx_ring[i]); | 
 |  | 
 | 	        	pci_unmap_single(rrpriv->pci_dev, desc->addr.addrlo, | 
 | 				dev->mtu + HIPPI_HLEN, PCI_DMA_FROMDEVICE); | 
 | 			desc->size = 0; | 
 | 			set_rraddr(&desc->addr, 0); | 
 | 			dev_kfree_skb(skb); | 
 | 			rrpriv->rx_skbuff[i] = NULL; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void rr_timer(unsigned long data) | 
 | { | 
 | 	struct net_device *dev = (struct net_device *)data; | 
 | 	struct rr_private *rrpriv = netdev_priv(dev); | 
 | 	struct rr_regs __iomem *regs = rrpriv->regs; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (readl(®s->HostCtrl) & NIC_HALTED){ | 
 | 		printk("%s: Restarting nic\n", dev->name); | 
 | 		memset(rrpriv->rx_ctrl, 0, 256 * sizeof(struct ring_ctrl)); | 
 | 		memset(rrpriv->info, 0, sizeof(struct rr_info)); | 
 | 		wmb(); | 
 |  | 
 | 		rr_raz_tx(rrpriv, dev); | 
 | 		rr_raz_rx(rrpriv, dev); | 
 |  | 
 | 		if (rr_init1(dev)) { | 
 | 			spin_lock_irqsave(&rrpriv->lock, flags); | 
 | 			writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, | 
 | 			       ®s->HostCtrl); | 
 | 			spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 | 		} | 
 | 	} | 
 | 	rrpriv->timer.expires = RUN_AT(5*HZ); | 
 | 	add_timer(&rrpriv->timer); | 
 | } | 
 |  | 
 |  | 
 | static int rr_open(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv = netdev_priv(dev); | 
 | 	struct pci_dev *pdev = rrpriv->pci_dev; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	int ecode = 0; | 
 | 	unsigned long flags; | 
 | 	dma_addr_t dma_addr; | 
 |  | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	if (rrpriv->fw_rev < 0x00020000) { | 
 | 		printk(KERN_WARNING "%s: trying to configure device with " | 
 | 		       "obsolete firmware\n", dev->name); | 
 | 		ecode = -EBUSY; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	rrpriv->rx_ctrl = pci_alloc_consistent(pdev, | 
 | 					       256 * sizeof(struct ring_ctrl), | 
 | 					       &dma_addr); | 
 | 	if (!rrpriv->rx_ctrl) { | 
 | 		ecode = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 | 	rrpriv->rx_ctrl_dma = dma_addr; | 
 | 	memset(rrpriv->rx_ctrl, 0, 256*sizeof(struct ring_ctrl)); | 
 |  | 
 | 	rrpriv->info = pci_alloc_consistent(pdev, sizeof(struct rr_info), | 
 | 					    &dma_addr); | 
 | 	if (!rrpriv->info) { | 
 | 		ecode = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 | 	rrpriv->info_dma = dma_addr; | 
 | 	memset(rrpriv->info, 0, sizeof(struct rr_info)); | 
 | 	wmb(); | 
 |  | 
 | 	spin_lock_irqsave(&rrpriv->lock, flags); | 
 | 	writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, ®s->HostCtrl); | 
 | 	readl(®s->HostCtrl); | 
 | 	spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 	if (request_irq(dev->irq, rr_interrupt, IRQF_SHARED, dev->name, dev)) { | 
 | 		printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", | 
 | 		       dev->name, dev->irq); | 
 | 		ecode = -EAGAIN; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	if ((ecode = rr_init1(dev))) | 
 | 		goto error; | 
 |  | 
 | 	/* Set the timer to switch to check for link beat and perhaps switch | 
 | 	   to an alternate media type. */ | 
 | 	init_timer(&rrpriv->timer); | 
 | 	rrpriv->timer.expires = RUN_AT(5*HZ);           /* 5 sec. watchdog */ | 
 | 	rrpriv->timer.data = (unsigned long)dev; | 
 | 	rrpriv->timer.function = &rr_timer;               /* timer handler */ | 
 | 	add_timer(&rrpriv->timer); | 
 |  | 
 | 	netif_start_queue(dev); | 
 |  | 
 | 	return ecode; | 
 |  | 
 |  error: | 
 | 	spin_lock_irqsave(&rrpriv->lock, flags); | 
 | 	writel(readl(®s->HostCtrl)|HALT_NIC|RR_CLEAR_INT, ®s->HostCtrl); | 
 | 	spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 	if (rrpriv->info) { | 
 | 		pci_free_consistent(pdev, sizeof(struct rr_info), rrpriv->info, | 
 | 				    rrpriv->info_dma); | 
 | 		rrpriv->info = NULL; | 
 | 	} | 
 | 	if (rrpriv->rx_ctrl) { | 
 | 		pci_free_consistent(pdev, sizeof(struct ring_ctrl), | 
 | 				    rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); | 
 | 		rrpriv->rx_ctrl = NULL; | 
 | 	} | 
 |  | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	return ecode; | 
 | } | 
 |  | 
 |  | 
 | static void rr_dump(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	u32 index, cons; | 
 | 	short i; | 
 | 	int len; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	printk("%s: dumping NIC TX rings\n", dev->name); | 
 |  | 
 | 	printk("RxPrd %08x, TxPrd %02x, EvtPrd %08x, TxPi %02x, TxCtrlPi %02x\n", | 
 | 	       readl(®s->RxPrd), readl(®s->TxPrd), | 
 | 	       readl(®s->EvtPrd), readl(®s->TxPi), | 
 | 	       rrpriv->info->tx_ctrl.pi); | 
 |  | 
 | 	printk("Error code 0x%x\n", readl(®s->Fail1)); | 
 |  | 
 | 	index = (((readl(®s->EvtPrd) >> 8) & 0xff ) - 1) % EVT_RING_ENTRIES; | 
 | 	cons = rrpriv->dirty_tx; | 
 | 	printk("TX ring index %i, TX consumer %i\n", | 
 | 	       index, cons); | 
 |  | 
 | 	if (rrpriv->tx_skbuff[index]){ | 
 | 		len = min_t(int, 0x80, rrpriv->tx_skbuff[index]->len); | 
 | 		printk("skbuff for index %i is valid - dumping data (0x%x bytes - DMA len 0x%x)\n", index, len, rrpriv->tx_ring[index].size); | 
 | 		for (i = 0; i < len; i++){ | 
 | 			if (!(i & 7)) | 
 | 				printk("\n"); | 
 | 			printk("%02x ", (unsigned char) rrpriv->tx_skbuff[index]->data[i]); | 
 | 		} | 
 | 		printk("\n"); | 
 | 	} | 
 |  | 
 | 	if (rrpriv->tx_skbuff[cons]){ | 
 | 		len = min_t(int, 0x80, rrpriv->tx_skbuff[cons]->len); | 
 | 		printk("skbuff for cons %i is valid - dumping data (0x%x bytes - skbuff len 0x%x)\n", cons, len, rrpriv->tx_skbuff[cons]->len); | 
 | 		printk("mode 0x%x, size 0x%x,\n phys %08Lx, skbuff-addr %08lx, truesize 0x%x\n", | 
 | 		       rrpriv->tx_ring[cons].mode, | 
 | 		       rrpriv->tx_ring[cons].size, | 
 | 		       (unsigned long long) rrpriv->tx_ring[cons].addr.addrlo, | 
 | 		       (unsigned long)rrpriv->tx_skbuff[cons]->data, | 
 | 		       (unsigned int)rrpriv->tx_skbuff[cons]->truesize); | 
 | 		for (i = 0; i < len; i++){ | 
 | 			if (!(i & 7)) | 
 | 				printk("\n"); | 
 | 			printk("%02x ", (unsigned char)rrpriv->tx_ring[cons].size); | 
 | 		} | 
 | 		printk("\n"); | 
 | 	} | 
 |  | 
 | 	printk("dumping TX ring info:\n"); | 
 | 	for (i = 0; i < TX_RING_ENTRIES; i++) | 
 | 		printk("mode 0x%x, size 0x%x, phys-addr %08Lx\n", | 
 | 		       rrpriv->tx_ring[i].mode, | 
 | 		       rrpriv->tx_ring[i].size, | 
 | 		       (unsigned long long) rrpriv->tx_ring[i].addr.addrlo); | 
 |  | 
 | } | 
 |  | 
 |  | 
 | static int rr_close(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	unsigned long flags; | 
 | 	u32 tmp; | 
 | 	short i; | 
 |  | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	/* | 
 | 	 * Lock to make sure we are not cleaning up while another CPU | 
 | 	 * is handling interrupts. | 
 | 	 */ | 
 | 	spin_lock_irqsave(&rrpriv->lock, flags); | 
 |  | 
 | 	tmp = readl(®s->HostCtrl); | 
 | 	if (tmp & NIC_HALTED){ | 
 | 		printk("%s: NIC already halted\n", dev->name); | 
 | 		rr_dump(dev); | 
 | 	}else{ | 
 | 		tmp |= HALT_NIC | RR_CLEAR_INT; | 
 | 		writel(tmp, ®s->HostCtrl); | 
 | 		readl(®s->HostCtrl); | 
 | 	} | 
 |  | 
 | 	rrpriv->fw_running = 0; | 
 |  | 
 | 	del_timer_sync(&rrpriv->timer); | 
 |  | 
 | 	writel(0, ®s->TxPi); | 
 | 	writel(0, ®s->IpRxPi); | 
 |  | 
 | 	writel(0, ®s->EvtCon); | 
 | 	writel(0, ®s->EvtPrd); | 
 |  | 
 | 	for (i = 0; i < CMD_RING_ENTRIES; i++) | 
 | 		writel(0, ®s->CmdRing[i]); | 
 |  | 
 | 	rrpriv->info->tx_ctrl.entries = 0; | 
 | 	rrpriv->info->cmd_ctrl.pi = 0; | 
 | 	rrpriv->info->evt_ctrl.pi = 0; | 
 | 	rrpriv->rx_ctrl[4].entries = 0; | 
 |  | 
 | 	rr_raz_tx(rrpriv, dev); | 
 | 	rr_raz_rx(rrpriv, dev); | 
 |  | 
 | 	pci_free_consistent(rrpriv->pci_dev, 256 * sizeof(struct ring_ctrl), | 
 | 			    rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); | 
 | 	rrpriv->rx_ctrl = NULL; | 
 |  | 
 | 	pci_free_consistent(rrpriv->pci_dev, sizeof(struct rr_info), | 
 | 			    rrpriv->info, rrpriv->info_dma); | 
 | 	rrpriv->info = NULL; | 
 |  | 
 | 	free_irq(dev->irq, dev); | 
 | 	spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv = netdev_priv(dev); | 
 | 	struct rr_regs __iomem *regs = rrpriv->regs; | 
 | 	struct hippi_cb *hcb = (struct hippi_cb *) skb->cb; | 
 | 	struct ring_ctrl *txctrl; | 
 | 	unsigned long flags; | 
 | 	u32 index, len = skb->len; | 
 | 	u32 *ifield; | 
 | 	struct sk_buff *new_skb; | 
 |  | 
 | 	if (readl(®s->Mode) & FATAL_ERR) | 
 | 		printk("error codes Fail1 %02x, Fail2 %02x\n", | 
 | 		       readl(®s->Fail1), readl(®s->Fail2)); | 
 |  | 
 | 	/* | 
 | 	 * We probably need to deal with tbusy here to prevent overruns. | 
 | 	 */ | 
 |  | 
 | 	if (skb_headroom(skb) < 8){ | 
 | 		printk("incoming skb too small - reallocating\n"); | 
 | 		if (!(new_skb = dev_alloc_skb(len + 8))) { | 
 | 			dev_kfree_skb(skb); | 
 | 			netif_wake_queue(dev); | 
 | 			return -EBUSY; | 
 | 		} | 
 | 		skb_reserve(new_skb, 8); | 
 | 		skb_put(new_skb, len); | 
 | 		memcpy(new_skb->data, skb->data, len); | 
 | 		dev_kfree_skb(skb); | 
 | 		skb = new_skb; | 
 | 	} | 
 |  | 
 | 	ifield = (u32 *)skb_push(skb, 8); | 
 |  | 
 | 	ifield[0] = 0; | 
 | 	ifield[1] = hcb->ifield; | 
 |  | 
 | 	/* | 
 | 	 * We don't need the lock before we are actually going to start | 
 | 	 * fiddling with the control blocks. | 
 | 	 */ | 
 | 	spin_lock_irqsave(&rrpriv->lock, flags); | 
 |  | 
 | 	txctrl = &rrpriv->info->tx_ctrl; | 
 |  | 
 | 	index = txctrl->pi; | 
 |  | 
 | 	rrpriv->tx_skbuff[index] = skb; | 
 | 	set_rraddr(&rrpriv->tx_ring[index].addr, pci_map_single( | 
 | 		rrpriv->pci_dev, skb->data, len + 8, PCI_DMA_TODEVICE)); | 
 | 	rrpriv->tx_ring[index].size = len + 8; /* include IFIELD */ | 
 | 	rrpriv->tx_ring[index].mode = PACKET_START | PACKET_END; | 
 | 	txctrl->pi = (index + 1) % TX_RING_ENTRIES; | 
 | 	wmb(); | 
 | 	writel(txctrl->pi, ®s->TxPi); | 
 |  | 
 | 	if (txctrl->pi == rrpriv->dirty_tx){ | 
 | 		rrpriv->tx_full = 1; | 
 | 		netif_stop_queue(dev); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static struct net_device_stats *rr_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 |  | 
 | 	return(&rrpriv->stats); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Read the firmware out of the EEPROM and put it into the SRAM | 
 |  * (or from user space - later) | 
 |  * | 
 |  * This operation requires the NIC to be halted and is performed with | 
 |  * interrupts disabled and with the spinlock hold. | 
 |  */ | 
 | static int rr_load_firmware(struct net_device *dev) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	struct rr_regs __iomem *regs; | 
 | 	unsigned long eptr, segptr; | 
 | 	int i, j; | 
 | 	u32 localctrl, sptr, len, tmp; | 
 | 	u32 p2len, p2size, nr_seg, revision, io, sram_size; | 
 | 	struct eeprom *hw = NULL; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 | 	regs = rrpriv->regs; | 
 |  | 
 | 	if (dev->flags & IFF_UP) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (!(readl(®s->HostCtrl) & NIC_HALTED)){ | 
 | 		printk("%s: Trying to load firmware to a running NIC.\n", | 
 | 		       dev->name); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	localctrl = readl(®s->LocalCtrl); | 
 | 	writel(0, ®s->LocalCtrl); | 
 |  | 
 | 	writel(0, ®s->EvtPrd); | 
 | 	writel(0, ®s->RxPrd); | 
 | 	writel(0, ®s->TxPrd); | 
 |  | 
 | 	/* | 
 | 	 * First wipe the entire SRAM, otherwise we might run into all | 
 | 	 * kinds of trouble ... sigh, this took almost all afternoon | 
 | 	 * to track down ;-( | 
 | 	 */ | 
 | 	io = readl(®s->ExtIo); | 
 | 	writel(0, ®s->ExtIo); | 
 | 	sram_size = rr_read_eeprom_word(rrpriv, (void *)8); | 
 |  | 
 | 	for (i = 200; i < sram_size / 4; i++){ | 
 | 		writel(i * 4, ®s->WinBase); | 
 | 		mb(); | 
 | 		writel(0, ®s->WinData); | 
 | 		mb(); | 
 | 	} | 
 | 	writel(io, ®s->ExtIo); | 
 | 	mb(); | 
 |  | 
 | 	eptr = (unsigned long)rr_read_eeprom_word(rrpriv, | 
 | 					       &hw->rncd_info.AddrRunCodeSegs); | 
 | 	eptr = ((eptr & 0x1fffff) >> 3); | 
 |  | 
 | 	p2len = rr_read_eeprom_word(rrpriv, (void *)(0x83*4)); | 
 | 	p2len = (p2len << 2); | 
 | 	p2size = rr_read_eeprom_word(rrpriv, (void *)(0x84*4)); | 
 | 	p2size = ((p2size & 0x1fffff) >> 3); | 
 |  | 
 | 	if ((eptr < p2size) || (eptr > (p2size + p2len))){ | 
 | 		printk("%s: eptr is invalid\n", dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	revision = rr_read_eeprom_word(rrpriv, &hw->manf.HeaderFmt); | 
 |  | 
 | 	if (revision != 1){ | 
 | 		printk("%s: invalid firmware format (%i)\n", | 
 | 		       dev->name, revision); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	nr_seg = rr_read_eeprom_word(rrpriv, (void *)eptr); | 
 | 	eptr +=4; | 
 | #if (DEBUG > 1) | 
 | 	printk("%s: nr_seg %i\n", dev->name, nr_seg); | 
 | #endif | 
 |  | 
 | 	for (i = 0; i < nr_seg; i++){ | 
 | 		sptr = rr_read_eeprom_word(rrpriv, (void *)eptr); | 
 | 		eptr += 4; | 
 | 		len = rr_read_eeprom_word(rrpriv, (void *)eptr); | 
 | 		eptr += 4; | 
 | 		segptr = (unsigned long)rr_read_eeprom_word(rrpriv, (void *)eptr); | 
 | 		segptr = ((segptr & 0x1fffff) >> 3); | 
 | 		eptr += 4; | 
 | #if (DEBUG > 1) | 
 | 		printk("%s: segment %i, sram address %06x, length %04x, segptr %06x\n", | 
 | 		       dev->name, i, sptr, len, segptr); | 
 | #endif | 
 | 		for (j = 0; j < len; j++){ | 
 | 			tmp = rr_read_eeprom_word(rrpriv, (void *)segptr); | 
 | 			writel(sptr, ®s->WinBase); | 
 | 			mb(); | 
 | 			writel(tmp, ®s->WinData); | 
 | 			mb(); | 
 | 			segptr += 4; | 
 | 			sptr += 4; | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	writel(localctrl, ®s->LocalCtrl); | 
 | 	mb(); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	struct rr_private *rrpriv; | 
 | 	unsigned char *image, *oldimage; | 
 | 	unsigned long flags; | 
 | 	unsigned int i; | 
 | 	int error = -EOPNOTSUPP; | 
 |  | 
 | 	rrpriv = netdev_priv(dev); | 
 |  | 
 | 	switch(cmd){ | 
 | 	case SIOCRRGFW: | 
 | 		if (!capable(CAP_SYS_RAWIO)){ | 
 | 			return -EPERM; | 
 | 		} | 
 |  | 
 | 		image = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
 | 		if (!image){ | 
 | 			printk(KERN_ERR "%s: Unable to allocate memory " | 
 | 			       "for EEPROM image\n", dev->name); | 
 | 			return -ENOMEM; | 
 | 		} | 
 |  | 
 |  | 
 | 		if (rrpriv->fw_running){ | 
 | 			printk("%s: Firmware already running\n", dev->name); | 
 | 			error = -EPERM; | 
 | 			goto gf_out; | 
 | 		} | 
 |  | 
 | 		spin_lock_irqsave(&rrpriv->lock, flags); | 
 | 		i = rr_read_eeprom(rrpriv, 0, image, EEPROM_BYTES); | 
 | 		spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 | 		if (i != EEPROM_BYTES){ | 
 | 			printk(KERN_ERR "%s: Error reading EEPROM\n", | 
 | 			       dev->name); | 
 | 			error = -EFAULT; | 
 | 			goto gf_out; | 
 | 		} | 
 | 		error = copy_to_user(rq->ifr_data, image, EEPROM_BYTES); | 
 | 		if (error) | 
 | 			error = -EFAULT; | 
 | 	gf_out: | 
 | 		kfree(image); | 
 | 		return error; | 
 |  | 
 | 	case SIOCRRPFW: | 
 | 		if (!capable(CAP_SYS_RAWIO)){ | 
 | 			return -EPERM; | 
 | 		} | 
 |  | 
 | 		image = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
 | 		oldimage = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL); | 
 | 		if (!image || !oldimage) { | 
 | 			printk(KERN_ERR "%s: Unable to allocate memory " | 
 | 			       "for EEPROM image\n", dev->name); | 
 | 			error = -ENOMEM; | 
 | 			goto wf_out; | 
 | 		} | 
 |  | 
 | 		error = copy_from_user(image, rq->ifr_data, EEPROM_BYTES); | 
 | 		if (error) { | 
 | 			error = -EFAULT; | 
 | 			goto wf_out; | 
 | 		} | 
 |  | 
 | 		if (rrpriv->fw_running){ | 
 | 			printk("%s: Firmware already running\n", dev->name); | 
 | 			error = -EPERM; | 
 | 			goto wf_out; | 
 | 		} | 
 |  | 
 | 		printk("%s: Updating EEPROM firmware\n", dev->name); | 
 |  | 
 | 		spin_lock_irqsave(&rrpriv->lock, flags); | 
 | 		error = write_eeprom(rrpriv, 0, image, EEPROM_BYTES); | 
 | 		if (error) | 
 | 			printk(KERN_ERR "%s: Error writing EEPROM\n", | 
 | 			       dev->name); | 
 |  | 
 | 		i = rr_read_eeprom(rrpriv, 0, oldimage, EEPROM_BYTES); | 
 | 		spin_unlock_irqrestore(&rrpriv->lock, flags); | 
 |  | 
 | 		if (i != EEPROM_BYTES) | 
 | 			printk(KERN_ERR "%s: Error reading back EEPROM " | 
 | 			       "image\n", dev->name); | 
 |  | 
 | 		error = memcmp(image, oldimage, EEPROM_BYTES); | 
 | 		if (error){ | 
 | 			printk(KERN_ERR "%s: Error verifying EEPROM image\n", | 
 | 			       dev->name); | 
 | 			error = -EFAULT; | 
 | 		} | 
 | 	wf_out: | 
 | 		kfree(oldimage); | 
 | 		kfree(image); | 
 | 		return error; | 
 |  | 
 | 	case SIOCRRID: | 
 | 		return put_user(0x52523032, (int __user *)rq->ifr_data); | 
 | 	default: | 
 | 		return error; | 
 | 	} | 
 | } | 
 |  | 
 | static struct pci_device_id rr_pci_tbl[] = { | 
 | 	{ PCI_VENDOR_ID_ESSENTIAL, PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, }, | 
 | 	{ 0,} | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci, rr_pci_tbl); | 
 |  | 
 | static struct pci_driver rr_driver = { | 
 | 	.name		= "rrunner", | 
 | 	.id_table	= rr_pci_tbl, | 
 | 	.probe		= rr_init_one, | 
 | 	.remove		= __devexit_p(rr_remove_one), | 
 | }; | 
 |  | 
 | static int __init rr_init_module(void) | 
 | { | 
 | 	return pci_register_driver(&rr_driver); | 
 | } | 
 |  | 
 | static void __exit rr_cleanup_module(void) | 
 | { | 
 | 	pci_unregister_driver(&rr_driver); | 
 | } | 
 |  | 
 | module_init(rr_init_module); | 
 | module_exit(rr_cleanup_module); | 
 |  | 
 | /* | 
 |  * Local variables: | 
 |  * compile-command: "gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -pipe -fomit-frame-pointer -fno-strength-reduce -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c rrunner.c" | 
 |  * End: | 
 |  */ |