[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
From: Bruce Ashfield <bruce.ashfield@windriver.com>
To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.
The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.
The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself. The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.
Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e3..bac03c8 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));