| /* | 
 |  * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. | 
 |  * | 
 |  *  Copyright (C) 2005 James Chapman (ds1337 core) | 
 |  *  Copyright (C) 2006 David Brownell | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/string.h> | 
 | #include <linux/rtc.h> | 
 | #include <linux/bcd.h> | 
 |  | 
 |  | 
 |  | 
 | /* We can't determine type by probing, but if we expect pre-Linux code | 
 |  * to have set the chip up as a clock (turning on the oscillator and | 
 |  * setting the date and time), Linux can ignore the non-clock features. | 
 |  * That's a natural job for a factory or repair bench. | 
 |  * | 
 |  * If the I2C "force" mechanism is used, we assume the chip is a ds1337. | 
 |  * (Much better would be board-specific tables of I2C devices, along with | 
 |  * the platform_data drivers would use to sort such issues out.) | 
 |  */ | 
 | enum ds_type { | 
 | 	unknown = 0, | 
 | 	ds_1307,		/* or ds1338, ... */ | 
 | 	ds_1337,		/* or ds1339, ... */ | 
 | 	ds_1340,		/* or st m41t00, ... */ | 
 | 	// rs5c372 too?  different address... | 
 | }; | 
 |  | 
 | static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; | 
 |  | 
 | I2C_CLIENT_INSMOD; | 
 |  | 
 |  | 
 |  | 
 | /* RTC registers don't differ much, except for the century flag */ | 
 | #define DS1307_REG_SECS		0x00	/* 00-59 */ | 
 | #	define DS1307_BIT_CH		0x80 | 
 | #define DS1307_REG_MIN		0x01	/* 00-59 */ | 
 | #define DS1307_REG_HOUR		0x02	/* 00-23, or 1-12{am,pm} */ | 
 | #	define DS1340_BIT_CENTURY_EN	0x80	/* in REG_HOUR */ | 
 | #	define DS1340_BIT_CENTURY	0x40	/* in REG_HOUR */ | 
 | #define DS1307_REG_WDAY		0x03	/* 01-07 */ | 
 | #define DS1307_REG_MDAY		0x04	/* 01-31 */ | 
 | #define DS1307_REG_MONTH	0x05	/* 01-12 */ | 
 | #	define DS1337_BIT_CENTURY	0x80	/* in REG_MONTH */ | 
 | #define DS1307_REG_YEAR		0x06	/* 00-99 */ | 
 |  | 
 | /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) | 
 |  * start at 7, and they differ a lot. Only control and status matter for RTC; | 
 |  * be careful using them. | 
 |  */ | 
 | #define DS1307_REG_CONTROL	0x07 | 
 | #	define DS1307_BIT_OUT		0x80 | 
 | #	define DS1307_BIT_SQWE		0x10 | 
 | #	define DS1307_BIT_RS1		0x02 | 
 | #	define DS1307_BIT_RS0		0x01 | 
 | #define DS1337_REG_CONTROL	0x0e | 
 | #	define DS1337_BIT_nEOSC		0x80 | 
 | #	define DS1337_BIT_RS2		0x10 | 
 | #	define DS1337_BIT_RS1		0x08 | 
 | #	define DS1337_BIT_INTCN		0x04 | 
 | #	define DS1337_BIT_A2IE		0x02 | 
 | #	define DS1337_BIT_A1IE		0x01 | 
 | #define DS1337_REG_STATUS	0x0f | 
 | #	define DS1337_BIT_OSF		0x80 | 
 | #	define DS1337_BIT_A2I		0x02 | 
 | #	define DS1337_BIT_A1I		0x01 | 
 | #define DS1339_REG_TRICKLE	0x10 | 
 |  | 
 |  | 
 |  | 
 | struct ds1307 { | 
 | 	u8			reg_addr; | 
 | 	u8			regs[8]; | 
 | 	enum ds_type		type; | 
 | 	struct i2c_msg		msg[2]; | 
 | 	struct i2c_client	client; | 
 | 	struct rtc_device	*rtc; | 
 | }; | 
 |  | 
 |  | 
 | static int ds1307_get_time(struct device *dev, struct rtc_time *t) | 
 | { | 
 | 	struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
 | 	int		tmp; | 
 |  | 
 | 	/* read the RTC registers all at once */ | 
 | 	ds1307->msg[1].flags = I2C_M_RD; | 
 | 	ds1307->msg[1].len = 7; | 
 |  | 
 | 	tmp = i2c_transfer(ds1307->client.adapter, ds1307->msg, 2); | 
 | 	if (tmp != 2) { | 
 | 		dev_err(dev, "%s error %d\n", "read", tmp); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
 | 			"read", | 
 | 			ds1307->regs[0], ds1307->regs[1], | 
 | 			ds1307->regs[2], ds1307->regs[3], | 
 | 			ds1307->regs[4], ds1307->regs[5], | 
 | 			ds1307->regs[6]); | 
 |  | 
 | 	t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); | 
 | 	t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
 | 	tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; | 
 | 	t->tm_hour = BCD2BIN(tmp); | 
 | 	t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; | 
 | 	t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
 | 	tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; | 
 | 	t->tm_mon = BCD2BIN(tmp) - 1; | 
 |  | 
 | 	/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ | 
 | 	t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; | 
 |  | 
 | 	dev_dbg(dev, "%s secs=%d, mins=%d, " | 
 | 		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 		"read", t->tm_sec, t->tm_min, | 
 | 		t->tm_hour, t->tm_mday, | 
 | 		t->tm_mon, t->tm_year, t->tm_wday); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ds1307_set_time(struct device *dev, struct rtc_time *t) | 
 | { | 
 | 	struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
 | 	int		result; | 
 | 	int		tmp; | 
 | 	u8		*buf = ds1307->regs; | 
 |  | 
 | 	dev_dbg(dev, "%s secs=%d, mins=%d, " | 
 | 		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 		"write", dt->tm_sec, dt->tm_min, | 
 | 		dt->tm_hour, dt->tm_mday, | 
 | 		dt->tm_mon, dt->tm_year, dt->tm_wday); | 
 |  | 
 | 	*buf++ = 0;		/* first register addr */ | 
 | 	buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); | 
 | 	buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); | 
 | 	buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); | 
 | 	buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); | 
 | 	buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); | 
 | 	buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); | 
 |  | 
 | 	/* assume 20YY not 19YY */ | 
 | 	tmp = t->tm_year - 100; | 
 | 	buf[DS1307_REG_YEAR] = BIN2BCD(tmp); | 
 |  | 
 | 	if (ds1307->type == ds_1337) | 
 | 		buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; | 
 | 	else if (ds1307->type == ds_1340) | 
 | 		buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | 
 | 				| DS1340_BIT_CENTURY; | 
 |  | 
 | 	ds1307->msg[1].flags = 0; | 
 | 	ds1307->msg[1].len = 8; | 
 |  | 
 | 	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
 | 		"write", buf[0], buf[1], buf[2], buf[3], | 
 | 		buf[4], buf[5], buf[6]); | 
 |  | 
 | 	result = i2c_transfer(ds1307->client.adapter, &ds1307->msg[1], 1); | 
 | 	if (result != 1) { | 
 | 		dev_err(dev, "%s error %d\n", "write", tmp); | 
 | 		return -EIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct rtc_class_ops ds13xx_rtc_ops = { | 
 | 	.read_time	= ds1307_get_time, | 
 | 	.set_time	= ds1307_set_time, | 
 | }; | 
 |  | 
 | static struct i2c_driver ds1307_driver; | 
 |  | 
 | static int __devinit | 
 | ds1307_detect(struct i2c_adapter *adapter, int address, int kind) | 
 | { | 
 | 	struct ds1307		*ds1307; | 
 | 	int			err = -ENODEV; | 
 | 	struct i2c_client	*client; | 
 | 	int			tmp; | 
 |  | 
 | 	if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) { | 
 | 		err = -ENOMEM; | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	client = &ds1307->client; | 
 | 	client->addr = address; | 
 | 	client->adapter = adapter; | 
 | 	client->driver = &ds1307_driver; | 
 | 	client->flags = 0; | 
 |  | 
 | 	i2c_set_clientdata(client, ds1307); | 
 |  | 
 | 	ds1307->msg[0].addr = client->addr; | 
 | 	ds1307->msg[0].flags = 0; | 
 | 	ds1307->msg[0].len = 1; | 
 | 	ds1307->msg[0].buf = &ds1307->reg_addr; | 
 |  | 
 | 	ds1307->msg[1].addr = client->addr; | 
 | 	ds1307->msg[1].flags = I2C_M_RD; | 
 | 	ds1307->msg[1].len = sizeof(ds1307->regs); | 
 | 	ds1307->msg[1].buf = ds1307->regs; | 
 |  | 
 | 	/* HACK: "force" implies "needs ds1337-style-oscillator setup" */ | 
 | 	if (kind >= 0) { | 
 | 		ds1307->type = ds_1337; | 
 |  | 
 | 		ds1307->reg_addr = DS1337_REG_CONTROL; | 
 | 		ds1307->msg[1].len = 2; | 
 |  | 
 | 		tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | 
 | 		if (tmp != 2) { | 
 | 			pr_debug("read error %d\n", tmp); | 
 | 			err = -EIO; | 
 | 			goto exit_free; | 
 | 		} | 
 |  | 
 | 		ds1307->reg_addr = 0; | 
 | 		ds1307->msg[1].len = sizeof(ds1307->regs); | 
 |  | 
 | 		/* oscillator is off; need to turn it on */ | 
 | 		if ((ds1307->regs[0] & DS1337_BIT_nEOSC) | 
 | 				|| (ds1307->regs[1] & DS1337_BIT_OSF)) { | 
 | 			printk(KERN_ERR "no ds1337 oscillator code\n"); | 
 | 			goto exit_free; | 
 | 		} | 
 | 	} else | 
 | 		ds1307->type = ds_1307; | 
 |  | 
 | read_rtc: | 
 | 	/* read RTC registers */ | 
 |  | 
 | 	tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | 
 | 	if (tmp != 2) { | 
 | 		pr_debug("read error %d\n", tmp); | 
 | 		err = -EIO; | 
 | 		goto exit_free; | 
 | 	} | 
 |  | 
 | 	/* minimal sanity checking; some chips (like DS1340) don't | 
 | 	 * specify the extra bits as must-be-zero, but there are | 
 | 	 * still a few values that are clearly out-of-range. | 
 | 	 */ | 
 | 	tmp = ds1307->regs[DS1307_REG_SECS]; | 
 | 	if (tmp & DS1307_BIT_CH) { | 
 | 		if (ds1307->type && ds1307->type != ds_1307) { | 
 | 			pr_debug("not a ds1307?\n"); | 
 | 			goto exit_free; | 
 | 		} | 
 | 		ds1307->type = ds_1307; | 
 |  | 
 | 		/* this partial initialization should work for ds1307, | 
 | 		 * ds1338, ds1340, st m41t00, and more. | 
 | 		 */ | 
 | 		dev_warn(&client->dev, "oscillator started; SET TIME!\n"); | 
 | 		i2c_smbus_write_byte_data(client, 0, 0); | 
 | 		goto read_rtc; | 
 | 	} | 
 | 	tmp = BCD2BIN(tmp & 0x7f); | 
 | 	if (tmp > 60) | 
 | 		goto exit_free; | 
 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
 | 	if (tmp > 60) | 
 | 		goto exit_free; | 
 |  | 
 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
 | 	if (tmp == 0 || tmp > 31) | 
 | 		goto exit_free; | 
 |  | 
 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); | 
 | 	if (tmp == 0 || tmp > 12) | 
 | 		goto exit_free; | 
 |  | 
 | 	/* force into in 24 hour mode (most chips) or | 
 | 	 * disable century bit (ds1340) | 
 | 	 */ | 
 | 	tmp = ds1307->regs[DS1307_REG_HOUR]; | 
 | 	if (tmp & (1 << 6)) { | 
 | 		if (tmp & (1 << 5)) | 
 | 			tmp = BCD2BIN(tmp & 0x1f) + 12; | 
 | 		else | 
 | 			tmp = BCD2BIN(tmp); | 
 | 		i2c_smbus_write_byte_data(client, | 
 | 				DS1307_REG_HOUR, | 
 | 				BIN2BCD(tmp)); | 
 | 	} | 
 |  | 
 | 	/* FIXME chips like 1337 can generate alarm irqs too; those are | 
 | 	 * worth exposing through the API (especially when the irq is | 
 | 	 * wakeup-capable). | 
 | 	 */ | 
 |  | 
 | 	switch (ds1307->type) { | 
 | 	case unknown: | 
 | 		strlcpy(client->name, "unknown", I2C_NAME_SIZE); | 
 | 		break; | 
 | 	case ds_1307: | 
 | 		strlcpy(client->name, "ds1307", I2C_NAME_SIZE); | 
 | 		break; | 
 | 	case ds_1337: | 
 | 		strlcpy(client->name, "ds1337", I2C_NAME_SIZE); | 
 | 		break; | 
 | 	case ds_1340: | 
 | 		strlcpy(client->name, "ds1340", I2C_NAME_SIZE); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* Tell the I2C layer a new client has arrived */ | 
 | 	if ((err = i2c_attach_client(client))) | 
 | 		goto exit_free; | 
 |  | 
 | 	ds1307->rtc = rtc_device_register(client->name, &client->dev, | 
 | 				&ds13xx_rtc_ops, THIS_MODULE); | 
 | 	if (IS_ERR(ds1307->rtc)) { | 
 | 		err = PTR_ERR(ds1307->rtc); | 
 | 		dev_err(&client->dev, | 
 | 			"unable to register the class device\n"); | 
 | 		goto exit_detach; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | exit_detach: | 
 | 	i2c_detach_client(client); | 
 | exit_free: | 
 | 	kfree(ds1307); | 
 | exit: | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devinit | 
 | ds1307_attach_adapter(struct i2c_adapter *adapter) | 
 | { | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) | 
 | 		return 0; | 
 | 	return i2c_probe(adapter, &addr_data, ds1307_detect); | 
 | } | 
 |  | 
 | static int __devexit ds1307_detach_client(struct i2c_client *client) | 
 | { | 
 | 	int		err; | 
 | 	struct ds1307	*ds1307 = i2c_get_clientdata(client); | 
 |  | 
 | 	rtc_device_unregister(ds1307->rtc); | 
 | 	if ((err = i2c_detach_client(client))) | 
 | 		return err; | 
 | 	kfree(ds1307); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct i2c_driver ds1307_driver = { | 
 | 	.driver = { | 
 | 		.name	= "ds1307", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | 	.attach_adapter	= ds1307_attach_adapter, | 
 | 	.detach_client	= __devexit_p(ds1307_detach_client), | 
 | }; | 
 |  | 
 | static int __init ds1307_init(void) | 
 | { | 
 | 	return i2c_add_driver(&ds1307_driver); | 
 | } | 
 | module_init(ds1307_init); | 
 |  | 
 | static void __exit ds1307_exit(void) | 
 | { | 
 | 	i2c_del_driver(&ds1307_driver); | 
 | } | 
 | module_exit(ds1307_exit); | 
 |  | 
 | MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); | 
 | MODULE_LICENSE("GPL"); |