Merge branch 'fixes' into next/cleanup
Merging in fixes since there's a conflict in the omap4 clock tables caused by
it.
* fixes: (245 commits)
ARM: highbank: fix cache flush ordering for cpu hotplug
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
ARM i.MX6: Fix ldb_di clock selection
ARM: imx: provide twd clock lookup from device tree
ARM: imx35 Bugfix admux clock
ARM: clk-imx35: Bugfix iomux clock
+ Linux 3.9-rc6
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/mach-omap2/cclock44xx_data.c
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index b1e77ef..88e37a4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+ OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1549,6 +1560,7 @@
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk),
+ CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m),
CLK(NULL, "sha2md5_fck", &sha2md5_fck),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0),
@@ -1706,5 +1718,13 @@
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 40f4a03..d6ba13e 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -293,5 +293,8 @@
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2c3fdd6..5c445ca 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,6 +55,12 @@
#include "prm44xx.h"
/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
+/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
@@ -397,7 +403,7 @@
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
- omap2420_clk_init();
+ omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
- omap2430_clk_init();
+ omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
@@ -568,7 +574,7 @@
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
- am33xx_clk_init();
+ omap_clk_init = am33xx_clk_init;
}
#endif
@@ -593,7 +599,7 @@
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
- omap4xxx_clk_init();
+ omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c2c798c..a202a47 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1368,7 +1368,9 @@
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+ (oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index d43d9b6..d5dc935 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -427,8 +427,8 @@
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- * of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ * out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ * is kept in force-standby mode. Failing to do so causes PM problems
+ * with musb on OMAP3630 at least. Note that musb has a dedicated register
+ * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -471,6 +475,7 @@
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
+#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac7e03e..5112d04 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1707,9 +1707,14 @@
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
+ *
+ * Enabling the device in any other MIDLEMODE setting but force-idle
+ * causes core_pwrdm not enter idle states at least on OMAP3630.
+ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+ * signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ | HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0e47d2e..eaba9dc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2719,7 +2719,17 @@
.name = "ocp2scp_usb_phy",
.class = &omap44xx_ocp2scp_hwmod_class,
.clkdm_name = "l3_init_clkdm",
- .main_clk = "func_48m_fclk",
+ /*
+ * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
+ * block as an "optional clock," and normally should never be
+ * specified as the main_clk for an OMAP IP block. However it
+ * turns out that this clock is actually the main clock for
+ * the ocp2scp_usb_phy IP block:
+ * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
+ * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
+ * to be the best workaround.
+ */
+ .main_clk = "ocp2scp_usb_phy_phy_48m",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 4fd8025..ee7a6bf 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -547,6 +547,8 @@
clksrc_nr, clksrc_src) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
@@ -556,6 +558,8 @@
clksrc_nr, clksrc_src) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \