Fix OMAP EHCI suspend/resume failure (i693) '354ab856' causes
an oops on boot for all omap3xxx platforms that use usbhs_omap for
EHCI. The actual oops comes from faulty ehci-omap cleanup, but the
failure caused by the change is evidenced here:
[ 3.655059] ehci-omap ehci-omap.0: utmi_p1_gfclk failed error:-2
[ 3.661376] ehci-omap: probe of ehci-omap.0 failed with error -2
utmi_p1_gfclk is a clock that exists on OMAP4, but not OMAP3. In the
OMAP3 case, it is configured as a dummy clock. However, OMAP4 lists
the dev_id as NULL, but OMAP3 lists it as "usbhs_omap".
Attempting to get that clock from ehci-omap then fails. The solution
is to just change the clock3xxx_data.c for dummy clocks used in the
errata fix to match the dev_id, NULL, used in clock44xx_data.c.
Tested on BB-xM.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1efdec2..d5c0cba 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3391,15 +3391,15 @@
CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
+ CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX),
+ CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX),
+ CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX),
+ CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX),
+ CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX),
+ CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX),
+ CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX),