OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e0a2804..6140290 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -394,10 +394,6 @@
REGULATOR_SUPPLY("vdd", "2-0063"),
};
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
@@ -514,21 +510,6 @@
.consumer_supplies = rx51_vsim_supply,
};
-static struct regulator_init_data rx51_vdac = {
- .constraints = {
- .name = "VDAC",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(rx51_vdac_supply),
- .consumer_supplies = rx51_vdac_supply,
-};
-
static struct regulator_init_data rx51_vio = {
.constraints = {
.min_uV = 1800000,
@@ -781,7 +762,6 @@
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
.vio = &rx51_vio,
};
@@ -838,7 +818,12 @@
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
omap3_pmic_get_config(&rx51_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+ TWL_COMMON_REGULATOR_VDAC);
+
+ rx51_twldata.vdac->constraints.apply_uV = true;
+ rx51_twldata.vdac->constraints.name = "VDAC";
+
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));