|  | /* | 
|  | * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> | 
|  | * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/physmap.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/serial_8250.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/vlynq.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/phy_fixed.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/clk.h> | 
|  |  | 
|  | #include <asm/addrspace.h> | 
|  | #include <asm/mach-ar7/ar7.h> | 
|  | #include <asm/mach-ar7/gpio.h> | 
|  | #include <asm/mach-ar7/prom.h> | 
|  |  | 
|  | /***************************************************************************** | 
|  | * VLYNQ Bus | 
|  | ****************************************************************************/ | 
|  | struct plat_vlynq_data { | 
|  | struct plat_vlynq_ops ops; | 
|  | int gpio_bit; | 
|  | int reset_bit; | 
|  | }; | 
|  |  | 
|  | static int vlynq_on(struct vlynq_device *dev) | 
|  | { | 
|  | int ret; | 
|  | struct plat_vlynq_data *pdata = dev->dev.platform_data; | 
|  |  | 
|  | ret = gpio_request(pdata->gpio_bit, "vlynq"); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ar7_device_reset(pdata->reset_bit); | 
|  |  | 
|  | ret = ar7_gpio_disable(pdata->gpio_bit); | 
|  | if (ret) | 
|  | goto out_enabled; | 
|  |  | 
|  | ret = ar7_gpio_enable(pdata->gpio_bit); | 
|  | if (ret) | 
|  | goto out_enabled; | 
|  |  | 
|  | ret = gpio_direction_output(pdata->gpio_bit, 0); | 
|  | if (ret) | 
|  | goto out_gpio_enabled; | 
|  |  | 
|  | msleep(50); | 
|  |  | 
|  | gpio_set_value(pdata->gpio_bit, 1); | 
|  |  | 
|  | msleep(50); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_gpio_enabled: | 
|  | ar7_gpio_disable(pdata->gpio_bit); | 
|  | out_enabled: | 
|  | ar7_device_disable(pdata->reset_bit); | 
|  | gpio_free(pdata->gpio_bit); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vlynq_off(struct vlynq_device *dev) | 
|  | { | 
|  | struct plat_vlynq_data *pdata = dev->dev.platform_data; | 
|  |  | 
|  | ar7_gpio_disable(pdata->gpio_bit); | 
|  | gpio_free(pdata->gpio_bit); | 
|  | ar7_device_disable(pdata->reset_bit); | 
|  | } | 
|  |  | 
|  | static struct resource vlynq_low_res[] = { | 
|  | { | 
|  | .name	= "regs", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= AR7_REGS_VLYNQ0, | 
|  | .end	= AR7_REGS_VLYNQ0 + 0xff, | 
|  | }, | 
|  | { | 
|  | .name	= "irq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 29, | 
|  | .end	= 29, | 
|  | }, | 
|  | { | 
|  | .name	= "mem", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= 0x04000000, | 
|  | .end	= 0x04ffffff, | 
|  | }, | 
|  | { | 
|  | .name	= "devirq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 80, | 
|  | .end	= 111, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct resource vlynq_high_res[] = { | 
|  | { | 
|  | .name	= "regs", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= AR7_REGS_VLYNQ1, | 
|  | .end	= AR7_REGS_VLYNQ1 + 0xff, | 
|  | }, | 
|  | { | 
|  | .name	= "irq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 33, | 
|  | .end	= 33, | 
|  | }, | 
|  | { | 
|  | .name	= "mem", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= 0x0c000000, | 
|  | .end	= 0x0cffffff, | 
|  | }, | 
|  | { | 
|  | .name	= "devirq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 112, | 
|  | .end	= 143, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct plat_vlynq_data vlynq_low_data = { | 
|  | .ops = { | 
|  | .on	= vlynq_on, | 
|  | .off	= vlynq_off, | 
|  | }, | 
|  | .reset_bit	= 20, | 
|  | .gpio_bit	= 18, | 
|  | }; | 
|  |  | 
|  | static struct plat_vlynq_data vlynq_high_data = { | 
|  | .ops = { | 
|  | .on	= vlynq_on, | 
|  | .off	= vlynq_off, | 
|  | }, | 
|  | .reset_bit	= 16, | 
|  | .gpio_bit	= 19, | 
|  | }; | 
|  |  | 
|  | static struct platform_device vlynq_low = { | 
|  | .id		= 0, | 
|  | .name		= "vlynq", | 
|  | .dev = { | 
|  | .platform_data	= &vlynq_low_data, | 
|  | }, | 
|  | .resource	= vlynq_low_res, | 
|  | .num_resources	= ARRAY_SIZE(vlynq_low_res), | 
|  | }; | 
|  |  | 
|  | static struct platform_device vlynq_high = { | 
|  | .id		= 1, | 
|  | .name		= "vlynq", | 
|  | .dev = { | 
|  | .platform_data	= &vlynq_high_data, | 
|  | }, | 
|  | .resource	= vlynq_high_res, | 
|  | .num_resources	= ARRAY_SIZE(vlynq_high_res), | 
|  | }; | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Flash | 
|  | ****************************************************************************/ | 
|  | static struct resource physmap_flash_resource = { | 
|  | .name	= "mem", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= 0x10000000, | 
|  | .end	= 0x107fffff, | 
|  | }; | 
|  |  | 
|  | static struct physmap_flash_data physmap_flash_data = { | 
|  | .width	= 2, | 
|  | }; | 
|  |  | 
|  | static struct platform_device physmap_flash = { | 
|  | .name		= "physmap-flash", | 
|  | .dev = { | 
|  | .platform_data	= &physmap_flash_data, | 
|  | }, | 
|  | .resource	= &physmap_flash_resource, | 
|  | .num_resources	= 1, | 
|  | }; | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Ethernet | 
|  | ****************************************************************************/ | 
|  | static struct resource cpmac_low_res[] = { | 
|  | { | 
|  | .name	= "regs", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= AR7_REGS_MAC0, | 
|  | .end	= AR7_REGS_MAC0 + 0x7ff, | 
|  | }, | 
|  | { | 
|  | .name	= "irq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 27, | 
|  | .end	= 27, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct resource cpmac_high_res[] = { | 
|  | { | 
|  | .name	= "regs", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= AR7_REGS_MAC1, | 
|  | .end	= AR7_REGS_MAC1 + 0x7ff, | 
|  | }, | 
|  | { | 
|  | .name	= "irq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 41, | 
|  | .end	= 41, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct fixed_phy_status fixed_phy_status __initdata = { | 
|  | .link		= 1, | 
|  | .speed		= 100, | 
|  | .duplex		= 1, | 
|  | }; | 
|  |  | 
|  | static struct plat_cpmac_data cpmac_low_data = { | 
|  | .reset_bit	= 17, | 
|  | .power_bit	= 20, | 
|  | .phy_mask	= 0x80000000, | 
|  | }; | 
|  |  | 
|  | static struct plat_cpmac_data cpmac_high_data = { | 
|  | .reset_bit	= 21, | 
|  | .power_bit	= 22, | 
|  | .phy_mask	= 0x7fffffff, | 
|  | }; | 
|  |  | 
|  | static u64 cpmac_dma_mask = DMA_BIT_MASK(32); | 
|  |  | 
|  | static struct platform_device cpmac_low = { | 
|  | .id		= 0, | 
|  | .name		= "cpmac", | 
|  | .dev = { | 
|  | .dma_mask		= &cpmac_dma_mask, | 
|  | .coherent_dma_mask	= DMA_BIT_MASK(32), | 
|  | .platform_data		= &cpmac_low_data, | 
|  | }, | 
|  | .resource	= cpmac_low_res, | 
|  | .num_resources	= ARRAY_SIZE(cpmac_low_res), | 
|  | }; | 
|  |  | 
|  | static struct platform_device cpmac_high = { | 
|  | .id		= 1, | 
|  | .name		= "cpmac", | 
|  | .dev = { | 
|  | .dma_mask		= &cpmac_dma_mask, | 
|  | .coherent_dma_mask	= DMA_BIT_MASK(32), | 
|  | .platform_data		= &cpmac_high_data, | 
|  | }, | 
|  | .resource	= cpmac_high_res, | 
|  | .num_resources	= ARRAY_SIZE(cpmac_high_res), | 
|  | }; | 
|  |  | 
|  | static void __init cpmac_get_mac(int instance, unsigned char *dev_addr) | 
|  | { | 
|  | char name[5], *mac; | 
|  |  | 
|  | sprintf(name, "mac%c", 'a' + instance); | 
|  | mac = prom_getenv(name); | 
|  | if (!mac && instance) { | 
|  | sprintf(name, "mac%c", 'a'); | 
|  | mac = prom_getenv(name); | 
|  | } | 
|  |  | 
|  | if (mac) { | 
|  | if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", | 
|  | &dev_addr[0], &dev_addr[1], | 
|  | &dev_addr[2], &dev_addr[3], | 
|  | &dev_addr[4], &dev_addr[5]) != 6) { | 
|  | pr_warning("cannot parse mac address, " | 
|  | "using random address\n"); | 
|  | random_ether_addr(dev_addr); | 
|  | } | 
|  | } else | 
|  | random_ether_addr(dev_addr); | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * USB | 
|  | ****************************************************************************/ | 
|  | static struct resource usb_res[] = { | 
|  | { | 
|  | .name	= "regs", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= AR7_REGS_USB, | 
|  | .end	= AR7_REGS_USB + 0xff, | 
|  | }, | 
|  | { | 
|  | .name	= "irq", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= 32, | 
|  | .end	= 32, | 
|  | }, | 
|  | { | 
|  | .name	= "mem", | 
|  | .flags	= IORESOURCE_MEM, | 
|  | .start	= 0x03400000, | 
|  | .end	= 0x03401fff, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device ar7_udc = { | 
|  | .name		= "ar7_udc", | 
|  | .resource	= usb_res, | 
|  | .num_resources	= ARRAY_SIZE(usb_res), | 
|  | }; | 
|  |  | 
|  | /***************************************************************************** | 
|  | * LEDs | 
|  | ****************************************************************************/ | 
|  | static struct gpio_led default_leds[] = { | 
|  | { | 
|  | .name			= "status", | 
|  | .gpio			= 8, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led titan_leds[] = { | 
|  | { .name = "status", .gpio = 8, .active_low = 1, }, | 
|  | { .name = "wifi", .gpio = 13, .active_low = 1, }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led dsl502t_leds[] = { | 
|  | { | 
|  | .name			= "status", | 
|  | .gpio			= 9, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "ethernet", | 
|  | .gpio			= 7, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "usb", | 
|  | .gpio			= 12, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led dg834g_leds[] = { | 
|  | { | 
|  | .name			= "ppp", | 
|  | .gpio			= 6, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "status", | 
|  | .gpio			= 7, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "adsl", | 
|  | .gpio			= 8, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "wifi", | 
|  | .gpio			= 12, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "power", | 
|  | .gpio			= 14, | 
|  | .active_low		= 1, | 
|  | .default_trigger	= "default-on", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led fb_sl_leds[] = { | 
|  | { | 
|  | .name			= "1", | 
|  | .gpio			= 7, | 
|  | }, | 
|  | { | 
|  | .name			= "2", | 
|  | .gpio			= 13, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "3", | 
|  | .gpio			= 10, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "4", | 
|  | .gpio			= 12, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "5", | 
|  | .gpio			= 9, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led fb_fon_leds[] = { | 
|  | { | 
|  | .name			= "1", | 
|  | .gpio			= 8, | 
|  | }, | 
|  | { | 
|  | .name			= "2", | 
|  | .gpio			= 3, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "3", | 
|  | .gpio			= 5, | 
|  | }, | 
|  | { | 
|  | .name			= "4", | 
|  | .gpio			= 4, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | { | 
|  | .name			= "5", | 
|  | .gpio			= 11, | 
|  | .active_low		= 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led_platform_data ar7_led_data; | 
|  |  | 
|  | static struct platform_device ar7_gpio_leds = { | 
|  | .name = "leds-gpio", | 
|  | .dev = { | 
|  | .platform_data = &ar7_led_data, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void __init detect_leds(void) | 
|  | { | 
|  | char *prid, *usb_prod; | 
|  |  | 
|  | /* Default LEDs	*/ | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(default_leds); | 
|  | ar7_led_data.leds = default_leds; | 
|  |  | 
|  | /* FIXME: the whole thing is unreliable */ | 
|  | prid = prom_getenv("ProductID"); | 
|  | usb_prod = prom_getenv("usb_prod"); | 
|  |  | 
|  | /* If we can't get the product id from PROM, use the default LEDs */ | 
|  | if (!prid) | 
|  | return; | 
|  |  | 
|  | if (strstr(prid, "Fritz_Box_FON")) { | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); | 
|  | ar7_led_data.leds = fb_fon_leds; | 
|  | } else if (strstr(prid, "Fritz_Box_")) { | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); | 
|  | ar7_led_data.leds = fb_sl_leds; | 
|  | } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB")) | 
|  | && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); | 
|  | ar7_led_data.leds = dsl502t_leds; | 
|  | } else if (strstr(prid, "DG834")) { | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); | 
|  | ar7_led_data.leds = dg834g_leds; | 
|  | } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { | 
|  | ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); | 
|  | ar7_led_data.leds = titan_leds; | 
|  | } | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Watchdog | 
|  | ****************************************************************************/ | 
|  | static struct resource ar7_wdt_res = { | 
|  | .name		= "regs", | 
|  | .flags		= IORESOURCE_MEM, | 
|  | .start		= -1,	/* Filled at runtime */ | 
|  | .end		= -1,	/* Filled at runtime */ | 
|  | }; | 
|  |  | 
|  | static struct platform_device ar7_wdt = { | 
|  | .name		= "ar7_wdt", | 
|  | .resource	= &ar7_wdt_res, | 
|  | .num_resources	= 1, | 
|  | }; | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Init | 
|  | ****************************************************************************/ | 
|  | static int __init ar7_register_uarts(void) | 
|  | { | 
|  | #ifdef CONFIG_SERIAL_8250 | 
|  | static struct uart_port uart_port __initdata; | 
|  | struct clk *bus_clk; | 
|  | int res; | 
|  |  | 
|  | memset(&uart_port, 0, sizeof(struct uart_port)); | 
|  |  | 
|  | bus_clk = clk_get(NULL, "bus"); | 
|  | if (IS_ERR(bus_clk)) | 
|  | panic("unable to get bus clk\n"); | 
|  |  | 
|  | uart_port.type		= PORT_AR7; | 
|  | uart_port.uartclk	= clk_get_rate(bus_clk) / 2; | 
|  | uart_port.iotype	= UPIO_MEM32; | 
|  | uart_port.regshift	= 2; | 
|  |  | 
|  | uart_port.line		= 0; | 
|  | uart_port.irq		= AR7_IRQ_UART0; | 
|  | uart_port.mapbase	= AR7_REGS_UART0; | 
|  | uart_port.membase	= ioremap(uart_port.mapbase, 256); | 
|  |  | 
|  | res = early_serial_setup(&uart_port); | 
|  | if (res) | 
|  | return res; | 
|  |  | 
|  | /* Only TNETD73xx have a second serial port */ | 
|  | if (ar7_has_second_uart()) { | 
|  | uart_port.line		= 1; | 
|  | uart_port.irq		= AR7_IRQ_UART1; | 
|  | uart_port.mapbase	= UR8_REGS_UART1; | 
|  | uart_port.membase	= ioremap(uart_port.mapbase, 256); | 
|  |  | 
|  | res = early_serial_setup(&uart_port); | 
|  | if (res) | 
|  | return res; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __init titan_fixup_devices(void) | 
|  | { | 
|  | /* Set vlynq0 data */ | 
|  | vlynq_low_data.reset_bit = 15; | 
|  | vlynq_low_data.gpio_bit = 14; | 
|  |  | 
|  | /* Set vlynq1 data */ | 
|  | vlynq_high_data.reset_bit = 16; | 
|  | vlynq_high_data.gpio_bit = 7; | 
|  |  | 
|  | /* Set vlynq0 resources */ | 
|  | vlynq_low_res[0].start = TITAN_REGS_VLYNQ0; | 
|  | vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff; | 
|  | vlynq_low_res[1].start = 33; | 
|  | vlynq_low_res[1].end = 33; | 
|  | vlynq_low_res[2].start = 0x0c000000; | 
|  | vlynq_low_res[2].end = 0x0fffffff; | 
|  | vlynq_low_res[3].start = 80; | 
|  | vlynq_low_res[3].end = 111; | 
|  |  | 
|  | /* Set vlynq1 resources */ | 
|  | vlynq_high_res[0].start = TITAN_REGS_VLYNQ1; | 
|  | vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff; | 
|  | vlynq_high_res[1].start = 34; | 
|  | vlynq_high_res[1].end = 34; | 
|  | vlynq_high_res[2].start = 0x40000000; | 
|  | vlynq_high_res[2].end = 0x43ffffff; | 
|  | vlynq_high_res[3].start = 112; | 
|  | vlynq_high_res[3].end = 143; | 
|  |  | 
|  | /* Set cpmac0 data */ | 
|  | cpmac_low_data.phy_mask = 0x40000000; | 
|  |  | 
|  | /* Set cpmac1 data */ | 
|  | cpmac_high_data.phy_mask = 0x80000000; | 
|  |  | 
|  | /* Set cpmac0 resources */ | 
|  | cpmac_low_res[0].start = TITAN_REGS_MAC0; | 
|  | cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff; | 
|  |  | 
|  | /* Set cpmac1 resources */ | 
|  | cpmac_high_res[0].start = TITAN_REGS_MAC1; | 
|  | cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff; | 
|  | } | 
|  |  | 
|  | static int __init ar7_register_devices(void) | 
|  | { | 
|  | void __iomem *bootcr; | 
|  | u32 val; | 
|  | int res; | 
|  |  | 
|  | res = ar7_register_uarts(); | 
|  | if (res) | 
|  | pr_err("unable to setup uart(s): %d\n", res); | 
|  |  | 
|  | res = platform_device_register(&physmap_flash); | 
|  | if (res) | 
|  | pr_warning("unable to register physmap-flash: %d\n", res); | 
|  |  | 
|  | if (ar7_is_titan()) | 
|  | titan_fixup_devices(); | 
|  |  | 
|  | ar7_device_disable(vlynq_low_data.reset_bit); | 
|  | res = platform_device_register(&vlynq_low); | 
|  | if (res) | 
|  | pr_warning("unable to register vlynq-low: %d\n", res); | 
|  |  | 
|  | if (ar7_has_high_vlynq()) { | 
|  | ar7_device_disable(vlynq_high_data.reset_bit); | 
|  | res = platform_device_register(&vlynq_high); | 
|  | if (res) | 
|  | pr_warning("unable to register vlynq-high: %d\n", res); | 
|  | } | 
|  |  | 
|  | if (ar7_has_high_cpmac()) { | 
|  | res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); | 
|  | if (!res) { | 
|  | cpmac_get_mac(1, cpmac_high_data.dev_addr); | 
|  |  | 
|  | res = platform_device_register(&cpmac_high); | 
|  | if (res) | 
|  | pr_warning("unable to register cpmac-high: %d\n", res); | 
|  | } else | 
|  | pr_warning("unable to add cpmac-high phy: %d\n", res); | 
|  | } else | 
|  | cpmac_low_data.phy_mask = 0xffffffff; | 
|  |  | 
|  | res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); | 
|  | if (!res) { | 
|  | cpmac_get_mac(0, cpmac_low_data.dev_addr); | 
|  | res = platform_device_register(&cpmac_low); | 
|  | if (res) | 
|  | pr_warning("unable to register cpmac-low: %d\n", res); | 
|  | } else | 
|  | pr_warning("unable to add cpmac-low phy: %d\n", res); | 
|  |  | 
|  | detect_leds(); | 
|  | res = platform_device_register(&ar7_gpio_leds); | 
|  | if (res) | 
|  | pr_warning("unable to register leds: %d\n", res); | 
|  |  | 
|  | res = platform_device_register(&ar7_udc); | 
|  | if (res) | 
|  | pr_warning("unable to register usb slave: %d\n", res); | 
|  |  | 
|  | /* Register watchdog only if enabled in hardware */ | 
|  | bootcr = ioremap_nocache(AR7_REGS_DCL, 4); | 
|  | val = readl(bootcr); | 
|  | iounmap(bootcr); | 
|  | if (val & AR7_WDT_HW_ENA) { | 
|  | if (ar7_has_high_vlynq()) | 
|  | ar7_wdt_res.start = UR8_REGS_WDT; | 
|  | else | 
|  | ar7_wdt_res.start = AR7_REGS_WDT; | 
|  |  | 
|  | ar7_wdt_res.end = ar7_wdt_res.start + 0x20; | 
|  | res = platform_device_register(&ar7_wdt); | 
|  | if (res) | 
|  | pr_warning("unable to register watchdog: %d\n", res); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | device_initcall(ar7_register_devices); |