|  | /* | 
|  | * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved. | 
|  | * | 
|  | *  This program is free software; you can distribute it and/or modify it | 
|  | *  under the terms of the GNU General Public License (Version 2) as | 
|  | *  published by the Free Software Foundation. | 
|  | * | 
|  | *  This program is distributed in the hope it will be useful, but WITHOUT | 
|  | *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License | 
|  | *  for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License along | 
|  | *  with this program; if not, write to the Free Software Foundation, Inc., | 
|  | *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * VPE support module | 
|  | * | 
|  | * Provides support for loading a MIPS SP program on VPE1. | 
|  | * The SP environment is rather simple, no tlb's.  It needs to be relocatable | 
|  | * (or partially linked). You should initialise your stack in the startup | 
|  | * code. This loader looks for the symbol __start and sets up | 
|  | * execution to resume from there. The MIPS SDE kit contains suitable examples. | 
|  | * | 
|  | * To load and run, simply cat a SP 'program file' to /dev/vpe1. | 
|  | * i.e cat spapp >/dev/vpe1. | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/elf.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/moduleloader.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <asm/mipsregs.h> | 
|  | #include <asm/mipsmtregs.h> | 
|  | #include <asm/cacheflush.h> | 
|  | #include <linux/atomic.h> | 
|  | #include <asm/cpu.h> | 
|  | #include <asm/mips_mt.h> | 
|  | #include <asm/processor.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/vpe.h> | 
|  | #include <asm/kspd.h> | 
|  |  | 
|  | typedef void *vpe_handle; | 
|  |  | 
|  | #ifndef ARCH_SHF_SMALL | 
|  | #define ARCH_SHF_SMALL 0 | 
|  | #endif | 
|  |  | 
|  | /* If this is set, the section belongs in the init part of the module */ | 
|  | #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) | 
|  |  | 
|  | /* | 
|  | * The number of TCs and VPEs physically available on the core | 
|  | */ | 
|  | static int hw_tcs, hw_vpes; | 
|  | static char module_name[] = "vpe"; | 
|  | static int major; | 
|  | static const int minor = 1;	/* fixed for now  */ | 
|  |  | 
|  | #ifdef CONFIG_MIPS_APSP_KSPD | 
|  | static struct kspd_notifications kspd_events; | 
|  | static int kspd_events_reqd; | 
|  | #endif | 
|  |  | 
|  | /* grab the likely amount of memory we will need. */ | 
|  | #ifdef CONFIG_MIPS_VPE_LOADER_TOM | 
|  | #define P_SIZE (2 * 1024 * 1024) | 
|  | #else | 
|  | /* add an overhead to the max kmalloc size for non-striped symbols/etc */ | 
|  | #define P_SIZE (256 * 1024) | 
|  | #endif | 
|  |  | 
|  | extern unsigned long physical_memsize; | 
|  |  | 
|  | #define MAX_VPES 16 | 
|  | #define VPE_PATH_MAX 256 | 
|  |  | 
|  | enum vpe_state { | 
|  | VPE_STATE_UNUSED = 0, | 
|  | VPE_STATE_INUSE, | 
|  | VPE_STATE_RUNNING | 
|  | }; | 
|  |  | 
|  | enum tc_state { | 
|  | TC_STATE_UNUSED = 0, | 
|  | TC_STATE_INUSE, | 
|  | TC_STATE_RUNNING, | 
|  | TC_STATE_DYNAMIC | 
|  | }; | 
|  |  | 
|  | struct vpe { | 
|  | enum vpe_state state; | 
|  |  | 
|  | /* (device) minor associated with this vpe */ | 
|  | int minor; | 
|  |  | 
|  | /* elfloader stuff */ | 
|  | void *load_addr; | 
|  | unsigned long len; | 
|  | char *pbuffer; | 
|  | unsigned long plen; | 
|  | unsigned int uid, gid; | 
|  | char cwd[VPE_PATH_MAX]; | 
|  |  | 
|  | unsigned long __start; | 
|  |  | 
|  | /* tc's associated with this vpe */ | 
|  | struct list_head tc; | 
|  |  | 
|  | /* The list of vpe's */ | 
|  | struct list_head list; | 
|  |  | 
|  | /* shared symbol address */ | 
|  | void *shared_ptr; | 
|  |  | 
|  | /* the list of who wants to know when something major happens */ | 
|  | struct list_head notify; | 
|  |  | 
|  | unsigned int ntcs; | 
|  | }; | 
|  |  | 
|  | struct tc { | 
|  | enum tc_state state; | 
|  | int index; | 
|  |  | 
|  | struct vpe *pvpe;	/* parent VPE */ | 
|  | struct list_head tc;	/* The list of TC's with this VPE */ | 
|  | struct list_head list;	/* The global list of tc's */ | 
|  | }; | 
|  |  | 
|  | struct { | 
|  | spinlock_t vpe_list_lock; | 
|  | struct list_head vpe_list;	/* Virtual processing elements */ | 
|  | spinlock_t tc_list_lock; | 
|  | struct list_head tc_list;	/* Thread contexts */ | 
|  | } vpecontrol = { | 
|  | .vpe_list_lock	= __SPIN_LOCK_UNLOCKED(vpe_list_lock), | 
|  | .vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list), | 
|  | .tc_list_lock	= __SPIN_LOCK_UNLOCKED(tc_list_lock), | 
|  | .tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list) | 
|  | }; | 
|  |  | 
|  | static void release_progmem(void *ptr); | 
|  |  | 
|  | /* get the vpe associated with this minor */ | 
|  | static struct vpe *get_vpe(int minor) | 
|  | { | 
|  | struct vpe *res, *v; | 
|  |  | 
|  | if (!cpu_has_mipsmt) | 
|  | return NULL; | 
|  |  | 
|  | res = NULL; | 
|  | spin_lock(&vpecontrol.vpe_list_lock); | 
|  | list_for_each_entry(v, &vpecontrol.vpe_list, list) { | 
|  | if (v->minor == minor) { | 
|  | res = v; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&vpecontrol.vpe_list_lock); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* get the vpe associated with this minor */ | 
|  | static struct tc *get_tc(int index) | 
|  | { | 
|  | struct tc *res, *t; | 
|  |  | 
|  | res = NULL; | 
|  | spin_lock(&vpecontrol.tc_list_lock); | 
|  | list_for_each_entry(t, &vpecontrol.tc_list, list) { | 
|  | if (t->index == index) { | 
|  | res = t; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&vpecontrol.tc_list_lock); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* allocate a vpe and associate it with this minor (or index) */ | 
|  | static struct vpe *alloc_vpe(int minor) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) | 
|  | return NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&v->tc); | 
|  | spin_lock(&vpecontrol.vpe_list_lock); | 
|  | list_add_tail(&v->list, &vpecontrol.vpe_list); | 
|  | spin_unlock(&vpecontrol.vpe_list_lock); | 
|  |  | 
|  | INIT_LIST_HEAD(&v->notify); | 
|  | v->minor = minor; | 
|  |  | 
|  | return v; | 
|  | } | 
|  |  | 
|  | /* allocate a tc. At startup only tc0 is running, all other can be halted. */ | 
|  | static struct tc *alloc_tc(int index) | 
|  | { | 
|  | struct tc *tc; | 
|  |  | 
|  | if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) | 
|  | goto out; | 
|  |  | 
|  | INIT_LIST_HEAD(&tc->tc); | 
|  | tc->index = index; | 
|  |  | 
|  | spin_lock(&vpecontrol.tc_list_lock); | 
|  | list_add_tail(&tc->list, &vpecontrol.tc_list); | 
|  | spin_unlock(&vpecontrol.tc_list_lock); | 
|  |  | 
|  | out: | 
|  | return tc; | 
|  | } | 
|  |  | 
|  | /* clean up and free everything */ | 
|  | static void release_vpe(struct vpe *v) | 
|  | { | 
|  | list_del(&v->list); | 
|  | if (v->load_addr) | 
|  | release_progmem(v); | 
|  | kfree(v); | 
|  | } | 
|  |  | 
|  | static void __maybe_unused dump_mtregs(void) | 
|  | { | 
|  | unsigned long val; | 
|  |  | 
|  | val = read_c0_config3(); | 
|  | printk("config3 0x%lx MT %ld\n", val, | 
|  | (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT); | 
|  |  | 
|  | val = read_c0_mvpcontrol(); | 
|  | printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val, | 
|  | (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT, | 
|  | (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT, | 
|  | (val & MVPCONTROL_EVP)); | 
|  |  | 
|  | val = read_c0_mvpconf0(); | 
|  | printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, | 
|  | (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, | 
|  | val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); | 
|  | } | 
|  |  | 
|  | /* Find some VPE program space  */ | 
|  | static void *alloc_progmem(unsigned long len) | 
|  | { | 
|  | void *addr; | 
|  |  | 
|  | #ifdef CONFIG_MIPS_VPE_LOADER_TOM | 
|  | /* | 
|  | * This means you must tell Linux to use less memory than you | 
|  | * physically have, for example by passing a mem= boot argument. | 
|  | */ | 
|  | addr = pfn_to_kaddr(max_low_pfn); | 
|  | memset(addr, 0, len); | 
|  | #else | 
|  | /* simple grab some mem for now */ | 
|  | addr = kzalloc(len, GFP_KERNEL); | 
|  | #endif | 
|  |  | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | static void release_progmem(void *ptr) | 
|  | { | 
|  | #ifndef CONFIG_MIPS_VPE_LOADER_TOM | 
|  | kfree(ptr); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* Update size with this section: return offset. */ | 
|  | static long get_offset(unsigned long *size, Elf_Shdr * sechdr) | 
|  | { | 
|  | long ret; | 
|  |  | 
|  | ret = ALIGN(*size, sechdr->sh_addralign ? : 1); | 
|  | *size = ret + sechdr->sh_size; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld | 
|  | might -- code, read-only data, read-write data, small data.  Tally | 
|  | sizes, and place the offsets into sh_entsize fields: high bit means it | 
|  | belongs in init. */ | 
|  | static void layout_sections(struct module *mod, const Elf_Ehdr * hdr, | 
|  | Elf_Shdr * sechdrs, const char *secstrings) | 
|  | { | 
|  | static unsigned long const masks[][2] = { | 
|  | /* NOTE: all executable code must be the first section | 
|  | * in this array; otherwise modify the text_size | 
|  | * finder in the two loops below */ | 
|  | {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL}, | 
|  | {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL}, | 
|  | {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL}, | 
|  | {ARCH_SHF_SMALL | SHF_ALLOC, 0} | 
|  | }; | 
|  | unsigned int m, i; | 
|  |  | 
|  | for (i = 0; i < hdr->e_shnum; i++) | 
|  | sechdrs[i].sh_entsize = ~0UL; | 
|  |  | 
|  | for (m = 0; m < ARRAY_SIZE(masks); ++m) { | 
|  | for (i = 0; i < hdr->e_shnum; ++i) { | 
|  | Elf_Shdr *s = &sechdrs[i]; | 
|  |  | 
|  | //  || strncmp(secstrings + s->sh_name, ".init", 5) == 0) | 
|  | if ((s->sh_flags & masks[m][0]) != masks[m][0] | 
|  | || (s->sh_flags & masks[m][1]) | 
|  | || s->sh_entsize != ~0UL) | 
|  | continue; | 
|  | s->sh_entsize = | 
|  | get_offset((unsigned long *)&mod->core_size, s); | 
|  | } | 
|  |  | 
|  | if (m == 0) | 
|  | mod->core_text_size = mod->core_size; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* from module-elf32.c, but subverted a little */ | 
|  |  | 
|  | struct mips_hi16 { | 
|  | struct mips_hi16 *next; | 
|  | Elf32_Addr *addr; | 
|  | Elf32_Addr value; | 
|  | }; | 
|  |  | 
|  | static struct mips_hi16 *mips_hi16_list; | 
|  | static unsigned int gp_offs, gp_addr; | 
|  |  | 
|  | static int apply_r_mips_none(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_gprel16(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | int rel; | 
|  |  | 
|  | if( !(*location & 0xffff) ) { | 
|  | rel = (int)v - gp_addr; | 
|  | } | 
|  | else { | 
|  | /* .sbss + gp(relative) + offset */ | 
|  | /* kludge! */ | 
|  | rel =  (int)(short)((int)v + gp_offs + | 
|  | (int)(short)(*location & 0xffff) - gp_addr); | 
|  | } | 
|  |  | 
|  | if( (rel > 32768) || (rel < -32768) ) { | 
|  | printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: " | 
|  | "relative address 0x%x out of range of gp register\n", | 
|  | rel); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | *location = (*location & 0xffff0000) | (rel & 0xffff); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_pc16(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | int rel; | 
|  | rel = (((unsigned int)v - (unsigned int)location)); | 
|  | rel >>= 2;		// because the offset is in _instructions_ not bytes. | 
|  | rel -= 1;		// and one instruction less due to the branch delay slot. | 
|  |  | 
|  | if( (rel > 32768) || (rel < -32768) ) { | 
|  | printk(KERN_DEBUG "VPE loader: " | 
|  | "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | *location = (*location & 0xffff0000) | (rel & 0xffff); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_32(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | *location += v; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_26(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | if (v % 4) { | 
|  | printk(KERN_DEBUG "VPE loader: apply_r_mips_26 " | 
|  | " unaligned relocation\n"); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Not desperately convinced this is a good check of an overflow condition | 
|  | * anyway. But it gets in the way of handling undefined weak symbols which | 
|  | * we want to set to zero. | 
|  | * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { | 
|  | * printk(KERN_ERR | 
|  | * "module %s: relocation overflow\n", | 
|  | * me->name); | 
|  | * return -ENOEXEC; | 
|  | * } | 
|  | */ | 
|  |  | 
|  | *location = (*location & ~0x03ffffff) | | 
|  | ((*location + (v >> 2)) & 0x03ffffff); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_hi16(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | struct mips_hi16 *n; | 
|  |  | 
|  | /* | 
|  | * We cannot relocate this one now because we don't know the value of | 
|  | * the carry we need to add.  Save the information, and let LO16 do the | 
|  | * actual relocation. | 
|  | */ | 
|  | n = kmalloc(sizeof *n, GFP_KERNEL); | 
|  | if (!n) | 
|  | return -ENOMEM; | 
|  |  | 
|  | n->addr = location; | 
|  | n->value = v; | 
|  | n->next = mips_hi16_list; | 
|  | mips_hi16_list = n; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int apply_r_mips_lo16(struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) | 
|  | { | 
|  | unsigned long insnlo = *location; | 
|  | Elf32_Addr val, vallo; | 
|  | struct mips_hi16 *l, *next; | 
|  |  | 
|  | /* Sign extend the addend we extract from the lo insn.  */ | 
|  | vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; | 
|  |  | 
|  | if (mips_hi16_list != NULL) { | 
|  |  | 
|  | l = mips_hi16_list; | 
|  | while (l != NULL) { | 
|  | unsigned long insn; | 
|  |  | 
|  | /* | 
|  | * The value for the HI16 had best be the same. | 
|  | */ | 
|  | if (v != l->value) { | 
|  | printk(KERN_DEBUG "VPE loader: " | 
|  | "apply_r_mips_lo16/hi16: \t" | 
|  | "inconsistent value information\n"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do the HI16 relocation.  Note that we actually don't | 
|  | * need to know anything about the LO16 itself, except | 
|  | * where to find the low 16 bits of the addend needed | 
|  | * by the LO16. | 
|  | */ | 
|  | insn = *l->addr; | 
|  | val = ((insn & 0xffff) << 16) + vallo; | 
|  | val += v; | 
|  |  | 
|  | /* | 
|  | * Account for the sign extension that will happen in | 
|  | * the low bits. | 
|  | */ | 
|  | val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; | 
|  |  | 
|  | insn = (insn & ~0xffff) | val; | 
|  | *l->addr = insn; | 
|  |  | 
|  | next = l->next; | 
|  | kfree(l); | 
|  | l = next; | 
|  | } | 
|  |  | 
|  | mips_hi16_list = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Ok, we're done with the HI16 relocs.  Now deal with the LO16. | 
|  | */ | 
|  | val = v + vallo; | 
|  | insnlo = (insnlo & ~0xffff) | (val & 0xffff); | 
|  | *location = insnlo; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_free: | 
|  | while (l != NULL) { | 
|  | next = l->next; | 
|  | kfree(l); | 
|  | l = next; | 
|  | } | 
|  | mips_hi16_list = NULL; | 
|  |  | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | static int (*reloc_handlers[]) (struct module *me, uint32_t *location, | 
|  | Elf32_Addr v) = { | 
|  | [R_MIPS_NONE]	= apply_r_mips_none, | 
|  | [R_MIPS_32]	= apply_r_mips_32, | 
|  | [R_MIPS_26]	= apply_r_mips_26, | 
|  | [R_MIPS_HI16]	= apply_r_mips_hi16, | 
|  | [R_MIPS_LO16]	= apply_r_mips_lo16, | 
|  | [R_MIPS_GPREL16] = apply_r_mips_gprel16, | 
|  | [R_MIPS_PC16] = apply_r_mips_pc16 | 
|  | }; | 
|  |  | 
|  | static char *rstrs[] = { | 
|  | [R_MIPS_NONE]	= "MIPS_NONE", | 
|  | [R_MIPS_32]	= "MIPS_32", | 
|  | [R_MIPS_26]	= "MIPS_26", | 
|  | [R_MIPS_HI16]	= "MIPS_HI16", | 
|  | [R_MIPS_LO16]	= "MIPS_LO16", | 
|  | [R_MIPS_GPREL16] = "MIPS_GPREL16", | 
|  | [R_MIPS_PC16] = "MIPS_PC16" | 
|  | }; | 
|  |  | 
|  | static int apply_relocations(Elf32_Shdr *sechdrs, | 
|  | const char *strtab, | 
|  | unsigned int symindex, | 
|  | unsigned int relsec, | 
|  | struct module *me) | 
|  | { | 
|  | Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr; | 
|  | Elf32_Sym *sym; | 
|  | uint32_t *location; | 
|  | unsigned int i; | 
|  | Elf32_Addr v; | 
|  | int res; | 
|  |  | 
|  | for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { | 
|  | Elf32_Word r_info = rel[i].r_info; | 
|  |  | 
|  | /* This is where to make the change */ | 
|  | location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr | 
|  | + rel[i].r_offset; | 
|  | /* This is the symbol it is referring to */ | 
|  | sym = (Elf32_Sym *)sechdrs[symindex].sh_addr | 
|  | + ELF32_R_SYM(r_info); | 
|  |  | 
|  | if (!sym->st_value) { | 
|  | printk(KERN_DEBUG "%s: undefined weak symbol %s\n", | 
|  | me->name, strtab + sym->st_name); | 
|  | /* just print the warning, dont barf */ | 
|  | } | 
|  |  | 
|  | v = sym->st_value; | 
|  |  | 
|  | res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); | 
|  | if( res ) { | 
|  | char *r = rstrs[ELF32_R_TYPE(r_info)]; | 
|  | printk(KERN_WARNING "VPE loader: .text+0x%x " | 
|  | "relocation type %s for symbol \"%s\" failed\n", | 
|  | rel[i].r_offset, r ? r : "UNKNOWN", | 
|  | strtab + sym->st_name); | 
|  | return res; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void save_gp_address(unsigned int secbase, unsigned int rel) | 
|  | { | 
|  | gp_addr = secbase + rel; | 
|  | gp_offs = gp_addr - (secbase & 0xffff0000); | 
|  | } | 
|  | /* end module-elf32.c */ | 
|  |  | 
|  |  | 
|  |  | 
|  | /* Change all symbols so that sh_value encodes the pointer directly. */ | 
|  | static void simplify_symbols(Elf_Shdr * sechdrs, | 
|  | unsigned int symindex, | 
|  | const char *strtab, | 
|  | const char *secstrings, | 
|  | unsigned int nsecs, struct module *mod) | 
|  | { | 
|  | Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; | 
|  | unsigned long secbase, bssbase = 0; | 
|  | unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); | 
|  | int size; | 
|  |  | 
|  | /* find the .bss section for COMMON symbols */ | 
|  | for (i = 0; i < nsecs; i++) { | 
|  | if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) { | 
|  | bssbase = sechdrs[i].sh_addr; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 1; i < n; i++) { | 
|  | switch (sym[i].st_shndx) { | 
|  | case SHN_COMMON: | 
|  | /* Allocate space for the symbol in the .bss section. | 
|  | st_value is currently size. | 
|  | We want it to have the address of the symbol. */ | 
|  |  | 
|  | size = sym[i].st_value; | 
|  | sym[i].st_value = bssbase; | 
|  |  | 
|  | bssbase += size; | 
|  | break; | 
|  |  | 
|  | case SHN_ABS: | 
|  | /* Don't need to do anything */ | 
|  | break; | 
|  |  | 
|  | case SHN_UNDEF: | 
|  | /* ret = -ENOENT; */ | 
|  | break; | 
|  |  | 
|  | case SHN_MIPS_SCOMMON: | 
|  | printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON " | 
|  | "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name, | 
|  | sym[i].st_shndx); | 
|  | // .sbss section | 
|  | break; | 
|  |  | 
|  | default: | 
|  | secbase = sechdrs[sym[i].st_shndx].sh_addr; | 
|  |  | 
|  | if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) { | 
|  | save_gp_address(secbase, sym[i].st_value); | 
|  | } | 
|  |  | 
|  | sym[i].st_value += secbase; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG_ELFLOADER | 
|  | static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex, | 
|  | const char *strtab, struct module *mod) | 
|  | { | 
|  | Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; | 
|  | unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); | 
|  |  | 
|  | printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n); | 
|  | for (i = 1; i < n; i++) { | 
|  | printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i, | 
|  | strtab + sym[i].st_name, sym[i].st_value); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* We are prepared so configure and start the VPE... */ | 
|  | static int vpe_run(struct vpe * v) | 
|  | { | 
|  | unsigned long flags, val, dmt_flag; | 
|  | struct vpe_notifications *n; | 
|  | unsigned int vpeflags; | 
|  | struct tc *t; | 
|  |  | 
|  | /* check we are the Master VPE */ | 
|  | local_irq_save(flags); | 
|  | val = read_c0_vpeconf0(); | 
|  | if (!(val & VPECONF0_MVP)) { | 
|  | printk(KERN_WARNING | 
|  | "VPE loader: only Master VPE's are allowed to configure MT\n"); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | dmt_flag = dmt(); | 
|  | vpeflags = dvpe(); | 
|  |  | 
|  | if (!list_empty(&v->tc)) { | 
|  | if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { | 
|  | evpe(vpeflags); | 
|  | emt(dmt_flag); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | printk(KERN_WARNING | 
|  | "VPE loader: TC %d is already in use.\n", | 
|  | t->index); | 
|  | return -ENOEXEC; | 
|  | } | 
|  | } else { | 
|  | evpe(vpeflags); | 
|  | emt(dmt_flag); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | printk(KERN_WARNING | 
|  | "VPE loader: No TC's associated with VPE %d\n", | 
|  | v->minor); | 
|  |  | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Put MVPE's into 'configuration state' */ | 
|  | set_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | settc(t->index); | 
|  |  | 
|  | /* should check it is halted, and not activated */ | 
|  | if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) { | 
|  | evpe(vpeflags); | 
|  | emt(dmt_flag); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | printk(KERN_WARNING "VPE loader: TC %d is already active!\n", | 
|  | t->index); | 
|  |  | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Write the address we want it to start running from in the TCPC register. */ | 
|  | write_tc_c0_tcrestart((unsigned long)v->__start); | 
|  | write_tc_c0_tccontext((unsigned long)0); | 
|  |  | 
|  | /* | 
|  | * Mark the TC as activated, not interrupt exempt and not dynamically | 
|  | * allocatable | 
|  | */ | 
|  | val = read_tc_c0_tcstatus(); | 
|  | val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; | 
|  | write_tc_c0_tcstatus(val); | 
|  |  | 
|  | write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); | 
|  |  | 
|  | /* | 
|  | * The sde-kit passes 'memsize' to __start in $a3, so set something | 
|  | * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and | 
|  | * DFLT_HEAP_SIZE when you compile your program | 
|  | */ | 
|  | mttgpr(6, v->ntcs); | 
|  | mttgpr(7, physical_memsize); | 
|  |  | 
|  | /* set up VPE1 */ | 
|  | /* | 
|  | * bind the TC to VPE 1 as late as possible so we only have the final | 
|  | * VPE registers to set up, and so an EJTAG probe can trigger on it | 
|  | */ | 
|  | write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1); | 
|  |  | 
|  | write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); | 
|  |  | 
|  | back_to_back_c0_hazard(); | 
|  |  | 
|  | /* Set up the XTC bit in vpeconf0 to point at our tc */ | 
|  | write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) | 
|  | | (t->index << VPECONF0_XTC_SHIFT)); | 
|  |  | 
|  | back_to_back_c0_hazard(); | 
|  |  | 
|  | /* enable this VPE */ | 
|  | write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); | 
|  |  | 
|  | /* clear out any left overs from a previous program */ | 
|  | write_vpe_c0_status(0); | 
|  | write_vpe_c0_cause(0); | 
|  |  | 
|  | /* take system out of configuration state */ | 
|  | clear_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | /* | 
|  | * SMTC/SMVP kernels manage VPE enable independently, | 
|  | * but uniprocessor kernels need to turn it on, even | 
|  | * if that wasn't the pre-dvpe() state. | 
|  | */ | 
|  | #ifdef CONFIG_SMP | 
|  | evpe(vpeflags); | 
|  | #else | 
|  | evpe(EVPE_ENABLE); | 
|  | #endif | 
|  | emt(dmt_flag); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | list_for_each_entry(n, &v->notify, list) | 
|  | n->start(minor); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, | 
|  | unsigned int symindex, const char *strtab, | 
|  | struct module *mod) | 
|  | { | 
|  | Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; | 
|  | unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); | 
|  |  | 
|  | for (i = 1; i < n; i++) { | 
|  | if (strcmp(strtab + sym[i].st_name, "__start") == 0) { | 
|  | v->__start = sym[i].st_value; | 
|  | } | 
|  |  | 
|  | if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) { | 
|  | v->shared_ptr = (void *)sym[i].st_value; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ( (v->__start == 0) || (v->shared_ptr == NULL)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocates a VPE with some program code space(the load address), copies the | 
|  | * contents of the program (p)buffer performing relocatations/etc, free's it | 
|  | * when finished. | 
|  | */ | 
|  | static int vpe_elfload(struct vpe * v) | 
|  | { | 
|  | Elf_Ehdr *hdr; | 
|  | Elf_Shdr *sechdrs; | 
|  | long err = 0; | 
|  | char *secstrings, *strtab = NULL; | 
|  | unsigned int len, i, symindex = 0, strindex = 0, relocate = 0; | 
|  | struct module mod;	// so we can re-use the relocations code | 
|  |  | 
|  | memset(&mod, 0, sizeof(struct module)); | 
|  | strcpy(mod.name, "VPE loader"); | 
|  |  | 
|  | hdr = (Elf_Ehdr *) v->pbuffer; | 
|  | len = v->plen; | 
|  |  | 
|  | /* Sanity checks against insmoding binaries or wrong arch, | 
|  | weird elf version */ | 
|  | if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0 | 
|  | || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC) | 
|  | || !elf_check_arch(hdr) | 
|  | || hdr->e_shentsize != sizeof(*sechdrs)) { | 
|  | printk(KERN_WARNING | 
|  | "VPE loader: program wrong arch or weird elf version\n"); | 
|  |  | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | if (hdr->e_type == ET_REL) | 
|  | relocate = 1; | 
|  |  | 
|  | if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) { | 
|  | printk(KERN_ERR "VPE loader: program length %u truncated\n", | 
|  | len); | 
|  |  | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Convenience variables */ | 
|  | sechdrs = (void *)hdr + hdr->e_shoff; | 
|  | secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; | 
|  | sechdrs[0].sh_addr = 0; | 
|  |  | 
|  | /* And these should exist, but gcc whinges if we don't init them */ | 
|  | symindex = strindex = 0; | 
|  |  | 
|  | if (relocate) { | 
|  | for (i = 1; i < hdr->e_shnum; i++) { | 
|  | if (sechdrs[i].sh_type != SHT_NOBITS | 
|  | && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { | 
|  | printk(KERN_ERR "VPE program length %u truncated\n", | 
|  | len); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Mark all sections sh_addr with their address in the | 
|  | temporary image. */ | 
|  | sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; | 
|  |  | 
|  | /* Internal symbols and strings. */ | 
|  | if (sechdrs[i].sh_type == SHT_SYMTAB) { | 
|  | symindex = i; | 
|  | strindex = sechdrs[i].sh_link; | 
|  | strtab = (char *)hdr + sechdrs[strindex].sh_offset; | 
|  | } | 
|  | } | 
|  | layout_sections(&mod, hdr, sechdrs, secstrings); | 
|  | } | 
|  |  | 
|  | v->load_addr = alloc_progmem(mod.core_size); | 
|  | if (!v->load_addr) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pr_info("VPE loader: loading to %p\n", v->load_addr); | 
|  |  | 
|  | if (relocate) { | 
|  | for (i = 0; i < hdr->e_shnum; i++) { | 
|  | void *dest; | 
|  |  | 
|  | if (!(sechdrs[i].sh_flags & SHF_ALLOC)) | 
|  | continue; | 
|  |  | 
|  | dest = v->load_addr + sechdrs[i].sh_entsize; | 
|  |  | 
|  | if (sechdrs[i].sh_type != SHT_NOBITS) | 
|  | memcpy(dest, (void *)sechdrs[i].sh_addr, | 
|  | sechdrs[i].sh_size); | 
|  | /* Update sh_addr to point to copy in image. */ | 
|  | sechdrs[i].sh_addr = (unsigned long)dest; | 
|  |  | 
|  | printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n", | 
|  | secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr); | 
|  | } | 
|  |  | 
|  | /* Fix up syms, so that st_value is a pointer to location. */ | 
|  | simplify_symbols(sechdrs, symindex, strtab, secstrings, | 
|  | hdr->e_shnum, &mod); | 
|  |  | 
|  | /* Now do relocations. */ | 
|  | for (i = 1; i < hdr->e_shnum; i++) { | 
|  | const char *strtab = (char *)sechdrs[strindex].sh_addr; | 
|  | unsigned int info = sechdrs[i].sh_info; | 
|  |  | 
|  | /* Not a valid relocation section? */ | 
|  | if (info >= hdr->e_shnum) | 
|  | continue; | 
|  |  | 
|  | /* Don't bother with non-allocated sections */ | 
|  | if (!(sechdrs[info].sh_flags & SHF_ALLOC)) | 
|  | continue; | 
|  |  | 
|  | if (sechdrs[i].sh_type == SHT_REL) | 
|  | err = apply_relocations(sechdrs, strtab, symindex, i, | 
|  | &mod); | 
|  | else if (sechdrs[i].sh_type == SHT_RELA) | 
|  | err = apply_relocate_add(sechdrs, strtab, symindex, i, | 
|  | &mod); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | } | 
|  | } else { | 
|  | struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff); | 
|  |  | 
|  | for (i = 0; i < hdr->e_phnum; i++) { | 
|  | if (phdr->p_type == PT_LOAD) { | 
|  | memcpy((void *)phdr->p_paddr, | 
|  | (char *)hdr + phdr->p_offset, | 
|  | phdr->p_filesz); | 
|  | memset((void *)phdr->p_paddr + phdr->p_filesz, | 
|  | 0, phdr->p_memsz - phdr->p_filesz); | 
|  | } | 
|  | phdr++; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < hdr->e_shnum; i++) { | 
|  | /* Internal symbols and strings. */ | 
|  | if (sechdrs[i].sh_type == SHT_SYMTAB) { | 
|  | symindex = i; | 
|  | strindex = sechdrs[i].sh_link; | 
|  | strtab = (char *)hdr + sechdrs[strindex].sh_offset; | 
|  |  | 
|  | /* mark the symtab's address for when we try to find the | 
|  | magic symbols */ | 
|  | sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* make sure it's physically written out */ | 
|  | flush_icache_range((unsigned long)v->load_addr, | 
|  | (unsigned long)v->load_addr + v->len); | 
|  |  | 
|  | if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) { | 
|  | if (v->__start == 0) { | 
|  | printk(KERN_WARNING "VPE loader: program does not contain " | 
|  | "a __start symbol\n"); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | if (v->shared_ptr == NULL) | 
|  | printk(KERN_WARNING "VPE loader: " | 
|  | "program does not contain vpe_shared symbol.\n" | 
|  | " Unable to use AMVP (AP/SP) facilities.\n"); | 
|  | } | 
|  |  | 
|  | printk(" elf loaded\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cleanup_tc(struct tc *tc) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned int mtflags, vpflags; | 
|  | int tmp; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | mtflags = dmt(); | 
|  | vpflags = dvpe(); | 
|  | /* Put MVPE's into 'configuration state' */ | 
|  | set_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | settc(tc->index); | 
|  | tmp = read_tc_c0_tcstatus(); | 
|  |  | 
|  | /* mark not allocated and not dynamically allocatable */ | 
|  | tmp &= ~(TCSTATUS_A | TCSTATUS_DA); | 
|  | tmp |= TCSTATUS_IXMT;	/* interrupt exempt */ | 
|  | write_tc_c0_tcstatus(tmp); | 
|  |  | 
|  | write_tc_c0_tchalt(TCHALT_H); | 
|  | mips_ihb(); | 
|  |  | 
|  | /* bind it to anything other than VPE1 */ | 
|  | //	write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE | 
|  |  | 
|  | clear_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  | evpe(vpflags); | 
|  | emt(mtflags); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | static int getcwd(char *buff, int size) | 
|  | { | 
|  | mm_segment_t old_fs; | 
|  | int ret; | 
|  |  | 
|  | old_fs = get_fs(); | 
|  | set_fs(KERNEL_DS); | 
|  |  | 
|  | ret = sys_getcwd(buff, size); | 
|  |  | 
|  | set_fs(old_fs); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* checks VPE is unused and gets ready to load program  */ | 
|  | static int vpe_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | enum vpe_state state; | 
|  | struct vpe_notifications *not; | 
|  | struct vpe *v; | 
|  | int ret; | 
|  |  | 
|  | if (minor != iminor(inode)) { | 
|  | /* assume only 1 device at the moment. */ | 
|  | pr_warning("VPE loader: only vpe1 is supported\n"); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if ((v = get_vpe(tclimit)) == NULL) { | 
|  | pr_warning("VPE loader: unable to get vpe\n"); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | state = xchg(&v->state, VPE_STATE_INUSE); | 
|  | if (state != VPE_STATE_UNUSED) { | 
|  | printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n"); | 
|  |  | 
|  | list_for_each_entry(not, &v->notify, list) { | 
|  | not->stop(tclimit); | 
|  | } | 
|  |  | 
|  | release_progmem(v->load_addr); | 
|  | cleanup_tc(get_tc(tclimit)); | 
|  | } | 
|  |  | 
|  | /* this of-course trashes what was there before... */ | 
|  | v->pbuffer = vmalloc(P_SIZE); | 
|  | if (!v->pbuffer) { | 
|  | pr_warning("VPE loader: unable to allocate memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | v->plen = P_SIZE; | 
|  | v->load_addr = NULL; | 
|  | v->len = 0; | 
|  |  | 
|  | v->uid = filp->f_cred->fsuid; | 
|  | v->gid = filp->f_cred->fsgid; | 
|  |  | 
|  | #ifdef CONFIG_MIPS_APSP_KSPD | 
|  | /* get kspd to tell us when a syscall_exit happens */ | 
|  | if (!kspd_events_reqd) { | 
|  | kspd_notify(&kspd_events); | 
|  | kspd_events_reqd++; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | v->cwd[0] = 0; | 
|  | ret = getcwd(v->cwd, VPE_PATH_MAX); | 
|  | if (ret < 0) | 
|  | printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret); | 
|  |  | 
|  | v->shared_ptr = NULL; | 
|  | v->__start = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vpe_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct vpe *v; | 
|  | Elf_Ehdr *hdr; | 
|  | int ret = 0; | 
|  |  | 
|  | v = get_vpe(tclimit); | 
|  | if (v == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | hdr = (Elf_Ehdr *) v->pbuffer; | 
|  | if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) { | 
|  | if (vpe_elfload(v) >= 0) { | 
|  | vpe_run(v); | 
|  | } else { | 
|  | printk(KERN_WARNING "VPE loader: ELF load failed.\n"); | 
|  | ret = -ENOEXEC; | 
|  | } | 
|  | } else { | 
|  | printk(KERN_WARNING "VPE loader: only elf files are supported\n"); | 
|  | ret = -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* It's good to be able to run the SP and if it chokes have a look at | 
|  | the /dev/rt?. But if we reset the pointer to the shared struct we | 
|  | lose what has happened. So perhaps if garbage is sent to the vpe | 
|  | device, use it as a trigger for the reset. Hopefully a nice | 
|  | executable will be along shortly. */ | 
|  | if (ret < 0) | 
|  | v->shared_ptr = NULL; | 
|  |  | 
|  | vfree(v->pbuffer); | 
|  | v->plen = 0; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t vpe_write(struct file *file, const char __user * buffer, | 
|  | size_t count, loff_t * ppos) | 
|  | { | 
|  | size_t ret = count; | 
|  | struct vpe *v; | 
|  |  | 
|  | if (iminor(file->f_path.dentry->d_inode) != minor) | 
|  | return -ENODEV; | 
|  |  | 
|  | v = get_vpe(tclimit); | 
|  | if (v == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | if ((count + v->len) > v->plen) { | 
|  | printk(KERN_WARNING | 
|  | "VPE loader: elf size too big. Perhaps strip uneeded symbols\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | count -= copy_from_user(v->pbuffer + v->len, buffer, count); | 
|  | if (!count) | 
|  | return -EFAULT; | 
|  |  | 
|  | v->len += count; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations vpe_fops = { | 
|  | .owner = THIS_MODULE, | 
|  | .open = vpe_open, | 
|  | .release = vpe_release, | 
|  | .write = vpe_write, | 
|  | .llseek = noop_llseek, | 
|  | }; | 
|  |  | 
|  | /* module wrapper entry points */ | 
|  | /* give me a vpe */ | 
|  | vpe_handle vpe_alloc(void) | 
|  | { | 
|  | int i; | 
|  | struct vpe *v; | 
|  |  | 
|  | /* find a vpe */ | 
|  | for (i = 1; i < MAX_VPES; i++) { | 
|  | if ((v = get_vpe(i)) != NULL) { | 
|  | v->state = VPE_STATE_INUSE; | 
|  | return v; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_alloc); | 
|  |  | 
|  | /* start running from here */ | 
|  | int vpe_start(vpe_handle vpe, unsigned long start) | 
|  | { | 
|  | struct vpe *v = vpe; | 
|  |  | 
|  | v->__start = start; | 
|  | return vpe_run(v); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_start); | 
|  |  | 
|  | /* halt it for now */ | 
|  | int vpe_stop(vpe_handle vpe) | 
|  | { | 
|  | struct vpe *v = vpe; | 
|  | struct tc *t; | 
|  | unsigned int evpe_flags; | 
|  |  | 
|  | evpe_flags = dvpe(); | 
|  |  | 
|  | if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) { | 
|  |  | 
|  | settc(t->index); | 
|  | write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); | 
|  | } | 
|  |  | 
|  | evpe(evpe_flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_stop); | 
|  |  | 
|  | /* I've done with it thank you */ | 
|  | int vpe_free(vpe_handle vpe) | 
|  | { | 
|  | struct vpe *v = vpe; | 
|  | struct tc *t; | 
|  | unsigned int evpe_flags; | 
|  |  | 
|  | if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | evpe_flags = dvpe(); | 
|  |  | 
|  | /* Put MVPE's into 'configuration state' */ | 
|  | set_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | settc(t->index); | 
|  | write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); | 
|  |  | 
|  | /* halt the TC */ | 
|  | write_tc_c0_tchalt(TCHALT_H); | 
|  | mips_ihb(); | 
|  |  | 
|  | /* mark the TC unallocated */ | 
|  | write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); | 
|  |  | 
|  | v->state = VPE_STATE_UNUSED; | 
|  |  | 
|  | clear_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  | evpe(evpe_flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_free); | 
|  |  | 
|  | void *vpe_get_shared(int index) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = get_vpe(index)) == NULL) | 
|  | return NULL; | 
|  |  | 
|  | return v->shared_ptr; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_get_shared); | 
|  |  | 
|  | int vpe_getuid(int index) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = get_vpe(index)) == NULL) | 
|  | return -1; | 
|  |  | 
|  | return v->uid; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_getuid); | 
|  |  | 
|  | int vpe_getgid(int index) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = get_vpe(index)) == NULL) | 
|  | return -1; | 
|  |  | 
|  | return v->gid; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_getgid); | 
|  |  | 
|  | int vpe_notify(int index, struct vpe_notifications *notify) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = get_vpe(index)) == NULL) | 
|  | return -1; | 
|  |  | 
|  | list_add(¬ify->list, &v->notify); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_notify); | 
|  |  | 
|  | char *vpe_getcwd(int index) | 
|  | { | 
|  | struct vpe *v; | 
|  |  | 
|  | if ((v = get_vpe(index)) == NULL) | 
|  | return NULL; | 
|  |  | 
|  | return v->cwd; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(vpe_getcwd); | 
|  |  | 
|  | #ifdef CONFIG_MIPS_APSP_KSPD | 
|  | static void kspd_sp_exit( int sp_id) | 
|  | { | 
|  | cleanup_tc(get_tc(sp_id)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static ssize_t store_kill(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct vpe *vpe = get_vpe(tclimit); | 
|  | struct vpe_notifications *not; | 
|  |  | 
|  | list_for_each_entry(not, &vpe->notify, list) { | 
|  | not->stop(tclimit); | 
|  | } | 
|  |  | 
|  | release_progmem(vpe->load_addr); | 
|  | cleanup_tc(get_tc(tclimit)); | 
|  | vpe_stop(vpe); | 
|  | vpe_free(vpe); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct vpe *vpe = get_vpe(tclimit); | 
|  |  | 
|  | return sprintf(buf, "%d\n", vpe->ntcs); | 
|  | } | 
|  |  | 
|  | static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct vpe *vpe = get_vpe(tclimit); | 
|  | unsigned long new; | 
|  | char *endp; | 
|  |  | 
|  | new = simple_strtoul(buf, &endp, 0); | 
|  | if (endp == buf) | 
|  | goto out_einval; | 
|  |  | 
|  | if (new == 0 || new > (hw_tcs - tclimit)) | 
|  | goto out_einval; | 
|  |  | 
|  | vpe->ntcs = new; | 
|  |  | 
|  | return len; | 
|  |  | 
|  | out_einval: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static struct device_attribute vpe_class_attributes[] = { | 
|  | __ATTR(kill, S_IWUSR, NULL, store_kill), | 
|  | __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs), | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static void vpe_device_release(struct device *cd) | 
|  | { | 
|  | kfree(cd); | 
|  | } | 
|  |  | 
|  | struct class vpe_class = { | 
|  | .name = "vpe", | 
|  | .owner = THIS_MODULE, | 
|  | .dev_release = vpe_device_release, | 
|  | .dev_attrs = vpe_class_attributes, | 
|  | }; | 
|  |  | 
|  | struct device vpe_device; | 
|  |  | 
|  | static int __init vpe_module_init(void) | 
|  | { | 
|  | unsigned int mtflags, vpflags; | 
|  | unsigned long flags, val; | 
|  | struct vpe *v = NULL; | 
|  | struct tc *t; | 
|  | int tc, err; | 
|  |  | 
|  | if (!cpu_has_mipsmt) { | 
|  | printk("VPE loader: not a MIPS MT capable processor\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (vpelimit == 0) { | 
|  | printk(KERN_WARNING "No VPEs reserved for AP/SP, not " | 
|  | "initializing VPE loader.\nPass maxvpes=<n> argument as " | 
|  | "kernel argument\n"); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (tclimit == 0) { | 
|  | printk(KERN_WARNING "No TCs reserved for AP/SP, not " | 
|  | "initializing VPE loader.\nPass maxtcs=<n> argument as " | 
|  | "kernel argument\n"); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | major = register_chrdev(0, module_name, &vpe_fops); | 
|  | if (major < 0) { | 
|  | printk("VPE loader: unable to register character device\n"); | 
|  | return major; | 
|  | } | 
|  |  | 
|  | err = class_register(&vpe_class); | 
|  | if (err) { | 
|  | printk(KERN_ERR "vpe_class registration failed\n"); | 
|  | goto out_chrdev; | 
|  | } | 
|  |  | 
|  | device_initialize(&vpe_device); | 
|  | vpe_device.class	= &vpe_class, | 
|  | vpe_device.parent	= NULL, | 
|  | dev_set_name(&vpe_device, "vpe1"); | 
|  | vpe_device.devt = MKDEV(major, minor); | 
|  | err = device_add(&vpe_device); | 
|  | if (err) { | 
|  | printk(KERN_ERR "Adding vpe_device failed\n"); | 
|  | goto out_class; | 
|  | } | 
|  |  | 
|  | local_irq_save(flags); | 
|  | mtflags = dmt(); | 
|  | vpflags = dvpe(); | 
|  |  | 
|  | /* Put MVPE's into 'configuration state' */ | 
|  | set_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | /* dump_mtregs(); */ | 
|  |  | 
|  | val = read_c0_mvpconf0(); | 
|  | hw_tcs = (val & MVPCONF0_PTC) + 1; | 
|  | hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; | 
|  |  | 
|  | for (tc = tclimit; tc < hw_tcs; tc++) { | 
|  | /* | 
|  | * Must re-enable multithreading temporarily or in case we | 
|  | * reschedule send IPIs or similar we might hang. | 
|  | */ | 
|  | clear_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  | evpe(vpflags); | 
|  | emt(mtflags); | 
|  | local_irq_restore(flags); | 
|  | t = alloc_tc(tc); | 
|  | if (!t) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | local_irq_save(flags); | 
|  | mtflags = dmt(); | 
|  | vpflags = dvpe(); | 
|  | set_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | /* VPE's */ | 
|  | if (tc < hw_tcs) { | 
|  | settc(tc); | 
|  |  | 
|  | if ((v = alloc_vpe(tc)) == NULL) { | 
|  | printk(KERN_WARNING "VPE: unable to allocate VPE\n"); | 
|  |  | 
|  | goto out_reenable; | 
|  | } | 
|  |  | 
|  | v->ntcs = hw_tcs - tclimit; | 
|  |  | 
|  | /* add the tc to the list of this vpe's tc's. */ | 
|  | list_add(&t->tc, &v->tc); | 
|  |  | 
|  | /* deactivate all but vpe0 */ | 
|  | if (tc >= tclimit) { | 
|  | unsigned long tmp = read_vpe_c0_vpeconf0(); | 
|  |  | 
|  | tmp &= ~VPECONF0_VPA; | 
|  |  | 
|  | /* master VPE */ | 
|  | tmp |= VPECONF0_MVP; | 
|  | write_vpe_c0_vpeconf0(tmp); | 
|  | } | 
|  |  | 
|  | /* disable multi-threading with TC's */ | 
|  | write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); | 
|  |  | 
|  | if (tc >= vpelimit) { | 
|  | /* | 
|  | * Set config to be the same as vpe0, | 
|  | * particularly kseg0 coherency alg | 
|  | */ | 
|  | write_vpe_c0_config(read_c0_config()); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* TC's */ | 
|  | t->pvpe = v;	/* set the parent vpe */ | 
|  |  | 
|  | if (tc >= tclimit) { | 
|  | unsigned long tmp; | 
|  |  | 
|  | settc(tc); | 
|  |  | 
|  | /* Any TC that is bound to VPE0 gets left as is - in case | 
|  | we are running SMTC on VPE0. A TC that is bound to any | 
|  | other VPE gets bound to VPE0, ideally I'd like to make | 
|  | it homeless but it doesn't appear to let me bind a TC | 
|  | to a non-existent VPE. Which is perfectly reasonable. | 
|  |  | 
|  | The (un)bound state is visible to an EJTAG probe so may | 
|  | notify GDB... | 
|  | */ | 
|  |  | 
|  | if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) { | 
|  | /* tc is bound >vpe0 */ | 
|  | write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); | 
|  |  | 
|  | t->pvpe = get_vpe(0);	/* set the parent vpe */ | 
|  | } | 
|  |  | 
|  | /* halt the TC */ | 
|  | write_tc_c0_tchalt(TCHALT_H); | 
|  | mips_ihb(); | 
|  |  | 
|  | tmp = read_tc_c0_tcstatus(); | 
|  |  | 
|  | /* mark not activated and not dynamically allocatable */ | 
|  | tmp &= ~(TCSTATUS_A | TCSTATUS_DA); | 
|  | tmp |= TCSTATUS_IXMT;	/* interrupt exempt */ | 
|  | write_tc_c0_tcstatus(tmp); | 
|  | } | 
|  | } | 
|  |  | 
|  | out_reenable: | 
|  | /* release config state */ | 
|  | clear_c0_mvpcontrol(MVPCONTROL_VPC); | 
|  |  | 
|  | evpe(vpflags); | 
|  | emt(mtflags); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | #ifdef CONFIG_MIPS_APSP_KSPD | 
|  | kspd_events.kspd_sp_exit = kspd_sp_exit; | 
|  | #endif | 
|  | return 0; | 
|  |  | 
|  | out_class: | 
|  | class_unregister(&vpe_class); | 
|  | out_chrdev: | 
|  | unregister_chrdev(major, module_name); | 
|  |  | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit vpe_module_exit(void) | 
|  | { | 
|  | struct vpe *v, *n; | 
|  |  | 
|  | device_del(&vpe_device); | 
|  | unregister_chrdev(major, module_name); | 
|  |  | 
|  | /* No locking needed here */ | 
|  | list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { | 
|  | if (v->state != VPE_STATE_UNUSED) | 
|  | release_vpe(v); | 
|  | } | 
|  | } | 
|  |  | 
|  | module_init(vpe_module_init); | 
|  | module_exit(vpe_module_exit); | 
|  | MODULE_DESCRIPTION("MIPS VPE Loader"); | 
|  | MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); | 
|  | MODULE_LICENSE("GPL"); |