|  | /* | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  | /* | 
|  | * Indicate whether we respect the PCI setup left by the firmware. | 
|  | * | 
|  | * Make this long-lived  so that we know when shutting down | 
|  | * whether we probed only or not. | 
|  | */ | 
|  | int pci_probe_only; | 
|  |  | 
|  | #define PCI_ASSIGN_ALL_BUSSES	1 | 
|  |  | 
|  | unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; | 
|  |  | 
|  | /* | 
|  | * The PCI controller list. | 
|  | */ | 
|  |  | 
|  | static struct pci_controller *hose_head, **hose_tail = &hose_head; | 
|  |  | 
|  | unsigned long PCIBIOS_MIN_IO; | 
|  | unsigned long PCIBIOS_MIN_MEM; | 
|  |  | 
|  | static int pci_initialized; | 
|  |  | 
|  | /* | 
|  | * We need to avoid collisions with `mirrored' VGA ports | 
|  | * and other strange ISA hardware, so we always want the | 
|  | * addresses to be allocated in the 0x000-0x0ff region | 
|  | * modulo 0x400. | 
|  | * | 
|  | * Why? Because some silly external IO cards only decode | 
|  | * the low 10 bits of the IO address. The 0x00-0xff region | 
|  | * is reserved for motherboard devices that decode all 16 | 
|  | * bits, so it's ok to allocate at, say, 0x2800-0x28ff, | 
|  | * but we want to try to avoid allocating at 0x2900-0x2bff | 
|  | * which might have be mirrored at 0x0100-0x03ff.. | 
|  | */ | 
|  | resource_size_t | 
|  | pcibios_align_resource(void *data, const struct resource *res, | 
|  | resource_size_t size, resource_size_t align) | 
|  | { | 
|  | struct pci_dev *dev = data; | 
|  | struct pci_controller *hose = dev->sysdata; | 
|  | resource_size_t start = res->start; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) { | 
|  | /* Make sure we start at our min on all hoses */ | 
|  | if (start < PCIBIOS_MIN_IO + hose->io_resource->start) | 
|  | start = PCIBIOS_MIN_IO + hose->io_resource->start; | 
|  |  | 
|  | /* | 
|  | * Put everything into 0x00-0xff region modulo 0x400 | 
|  | */ | 
|  | if (start & 0x300) | 
|  | start = (start + 0x3ff) & ~0x3ff; | 
|  | } else if (res->flags & IORESOURCE_MEM) { | 
|  | /* Make sure we start at our min on all hoses */ | 
|  | if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start) | 
|  | start = PCIBIOS_MIN_MEM + hose->mem_resource->start; | 
|  | } | 
|  |  | 
|  | return start; | 
|  | } | 
|  |  | 
|  | static void __devinit pcibios_scanbus(struct pci_controller *hose) | 
|  | { | 
|  | static int next_busno; | 
|  | static int need_domain_info; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | if (!hose->iommu) | 
|  | PCI_DMA_BUS_IS_PHYS = 1; | 
|  |  | 
|  | if (hose->get_busno && pci_probe_only) | 
|  | next_busno = (*hose->get_busno)(); | 
|  |  | 
|  | bus = pci_scan_bus(next_busno, hose->pci_ops, hose); | 
|  | hose->bus = bus; | 
|  |  | 
|  | need_domain_info = need_domain_info || hose->index; | 
|  | hose->need_domain_info = need_domain_info; | 
|  | if (bus) { | 
|  | next_busno = bus->subordinate + 1; | 
|  | /* Don't allow 8-bit bus number overflow inside the hose - | 
|  | reserve some space for bridges. */ | 
|  | if (next_busno > 224) { | 
|  | next_busno = 0; | 
|  | need_domain_info = 1; | 
|  | } | 
|  |  | 
|  | if (!pci_probe_only) { | 
|  | pci_bus_size_bridges(bus); | 
|  | pci_bus_assign_resources(bus); | 
|  | pci_enable_bridges(bus); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static DEFINE_MUTEX(pci_scan_mutex); | 
|  |  | 
|  | void __devinit register_pci_controller(struct pci_controller *hose) | 
|  | { | 
|  | if (request_resource(&iomem_resource, hose->mem_resource) < 0) | 
|  | goto out; | 
|  | if (request_resource(&ioport_resource, hose->io_resource) < 0) { | 
|  | release_resource(hose->mem_resource); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | *hose_tail = hose; | 
|  | hose_tail = &hose->next; | 
|  |  | 
|  | /* | 
|  | * Do not panic here but later - this might happen before console init. | 
|  | */ | 
|  | if (!hose->io_map_base) { | 
|  | printk(KERN_WARNING | 
|  | "registering PCI controller with io_map_base unset\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Scan the bus if it is register after the PCI subsystem | 
|  | * initialization. | 
|  | */ | 
|  | if (pci_initialized) { | 
|  | mutex_lock(&pci_scan_mutex); | 
|  | pcibios_scanbus(hose); | 
|  | mutex_unlock(&pci_scan_mutex); | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | out: | 
|  | printk(KERN_WARNING | 
|  | "Skipping PCI bus scan due to resource conflict\n"); | 
|  | } | 
|  |  | 
|  | static int __init pcibios_init(void) | 
|  | { | 
|  | struct pci_controller *hose; | 
|  |  | 
|  | /* Scan all of the recorded PCI controllers.  */ | 
|  | for (hose = hose_head; hose; hose = hose->next) | 
|  | pcibios_scanbus(hose); | 
|  |  | 
|  | pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq); | 
|  |  | 
|  | pci_initialized = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(pcibios_init); | 
|  |  | 
|  | static int pcibios_enable_resources(struct pci_dev *dev, int mask) | 
|  | { | 
|  | u16 cmd, old_cmd; | 
|  | int idx; | 
|  | struct resource *r; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | old_cmd = cmd; | 
|  | for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { | 
|  | /* Only set up the requested stuff */ | 
|  | if (!(mask & (1<<idx))) | 
|  | continue; | 
|  |  | 
|  | r = &dev->resource[idx]; | 
|  | if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) | 
|  | continue; | 
|  | if ((idx == PCI_ROM_RESOURCE) && | 
|  | (!(r->flags & IORESOURCE_ROM_ENABLE))) | 
|  | continue; | 
|  | if (!r->start && r->end) { | 
|  | printk(KERN_ERR "PCI: Device %s not available " | 
|  | "because of resource collisions\n", | 
|  | pci_name(dev)); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | cmd |= PCI_COMMAND_IO; | 
|  | if (r->flags & IORESOURCE_MEM) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | } | 
|  | if (cmd != old_cmd) { | 
|  | printk("PCI: Enabling device %s (%04x -> %04x)\n", | 
|  | pci_name(dev), old_cmd, cmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, cmd); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  If we set up a device for bus mastering, we need to check the latency | 
|  | *  timer as certain crappy BIOSes forget to set it properly. | 
|  | */ | 
|  | static unsigned int pcibios_max_latency = 255; | 
|  |  | 
|  | void pcibios_set_master(struct pci_dev *dev) | 
|  | { | 
|  | u8 lat; | 
|  | pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); | 
|  | if (lat < 16) | 
|  | lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; | 
|  | else if (lat > pcibios_max_latency) | 
|  | lat = pcibios_max_latency; | 
|  | else | 
|  | return; | 
|  | printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", | 
|  | pci_name(dev), lat); | 
|  | pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); | 
|  | } | 
|  |  | 
|  | unsigned int pcibios_assign_all_busses(void) | 
|  | { | 
|  | return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if ((err = pcibios_enable_resources(dev, mask)) < 0) | 
|  | return err; | 
|  |  | 
|  | return pcibios_plat_dev_init(dev); | 
|  | } | 
|  |  | 
|  | static void pcibios_fixup_device_resources(struct pci_dev *dev, | 
|  | struct pci_bus *bus) | 
|  | { | 
|  | /* Update device resources.  */ | 
|  | struct pci_controller *hose = (struct pci_controller *)bus->sysdata; | 
|  | unsigned long offset = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < PCI_NUM_RESOURCES; i++) { | 
|  | if (!dev->resource[i].start) | 
|  | continue; | 
|  | if (dev->resource[i].flags & IORESOURCE_IO) | 
|  | offset = hose->io_offset; | 
|  | else if (dev->resource[i].flags & IORESOURCE_MEM) | 
|  | offset = hose->mem_offset; | 
|  |  | 
|  | dev->resource[i].start += offset; | 
|  | dev->resource[i].end += offset; | 
|  | } | 
|  | } | 
|  |  | 
|  | void __devinit pcibios_fixup_bus(struct pci_bus *bus) | 
|  | { | 
|  | /* Propagate hose info into the subordinate devices.  */ | 
|  |  | 
|  | struct pci_controller *hose = bus->sysdata; | 
|  | struct list_head *ln; | 
|  | struct pci_dev *dev = bus->self; | 
|  |  | 
|  | if (!dev) { | 
|  | bus->resource[0] = hose->io_resource; | 
|  | bus->resource[1] = hose->mem_resource; | 
|  | } else if (pci_probe_only && | 
|  | (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { | 
|  | pci_read_bridge_bases(bus); | 
|  | pcibios_fixup_device_resources(dev, bus); | 
|  | } | 
|  |  | 
|  | for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { | 
|  | dev = pci_dev_b(ln); | 
|  |  | 
|  | if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) | 
|  | pcibios_fixup_device_resources(dev, bus); | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init | 
|  | pcibios_update_irq(struct pci_dev *dev, int irq) | 
|  | { | 
|  | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); | 
|  | } | 
|  |  | 
|  | void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | 
|  | struct resource *res) | 
|  | { | 
|  | struct pci_controller *hose = (struct pci_controller *)dev->sysdata; | 
|  | unsigned long offset = 0; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) | 
|  | offset = hose->io_offset; | 
|  | else if (res->flags & IORESOURCE_MEM) | 
|  | offset = hose->mem_offset; | 
|  |  | 
|  | region->start = res->start - offset; | 
|  | region->end = res->end - offset; | 
|  | } | 
|  |  | 
|  | void __devinit | 
|  | pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, | 
|  | struct pci_bus_region *region) | 
|  | { | 
|  | struct pci_controller *hose = (struct pci_controller *)dev->sysdata; | 
|  | unsigned long offset = 0; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) | 
|  | offset = hose->io_offset; | 
|  | else if (res->flags & IORESOURCE_MEM) | 
|  | offset = hose->mem_offset; | 
|  |  | 
|  | res->start = region->start + offset; | 
|  | res->end = region->end + offset; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG | 
|  | EXPORT_SYMBOL(pcibios_resource_to_bus); | 
|  | EXPORT_SYMBOL(pcibios_bus_to_resource); | 
|  | EXPORT_SYMBOL(PCIBIOS_MIN_IO); | 
|  | EXPORT_SYMBOL(PCIBIOS_MIN_MEM); | 
|  | #endif | 
|  |  | 
|  | int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | 
|  | enum pci_mmap_state mmap_state, int write_combine) | 
|  | { | 
|  | unsigned long prot; | 
|  |  | 
|  | /* | 
|  | * I/O space can be accessed via normal processor loads and stores on | 
|  | * this platform but for now we elect not to do this and portable | 
|  | * drivers should not do this anyway. | 
|  | */ | 
|  | if (mmap_state == pci_mmap_io) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Ignore write-combine; for now only return uncached mappings. | 
|  | */ | 
|  | prot = pgprot_val(vma->vm_page_prot); | 
|  | prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED; | 
|  | vma->vm_page_prot = __pgprot(prot); | 
|  |  | 
|  | return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
|  | vma->vm_end - vma->vm_start, vma->vm_page_prot); | 
|  | } | 
|  |  | 
|  | char * (*pcibios_plat_setup)(char *str) __devinitdata; | 
|  |  | 
|  | char *__devinit pcibios_setup(char *str) | 
|  | { | 
|  | if (pcibios_plat_setup) | 
|  | return pcibios_plat_setup(str); | 
|  | return str; | 
|  | } |