|  | /* | 
|  | * | 
|  | * Procedures for interfacing to the RTAS on CHRP machines. | 
|  | * | 
|  | * Peter Bergner, IBM	March 2001. | 
|  | * Copyright (C) 2001 IBM. | 
|  | * | 
|  | *      This program is free software; you can redistribute it and/or | 
|  | *      modify it under the terms of the GNU General Public License | 
|  | *      as published by the Free Software Foundation; either version | 
|  | *      2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <stdarg.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/cpumask.h> | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/reboot.h> | 
|  |  | 
|  | #include <asm/prom.h> | 
|  | #include <asm/rtas.h> | 
|  | #include <asm/hvcall.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/param.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/delay.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/udbg.h> | 
|  | #include <asm/syscalls.h> | 
|  | #include <asm/smp.h> | 
|  | #include <linux/atomic.h> | 
|  | #include <asm/time.h> | 
|  | #include <asm/mmu.h> | 
|  | #include <asm/topology.h> | 
|  | #include <asm/pSeries_reconfig.h> | 
|  |  | 
|  | struct rtas_t rtas = { | 
|  | .lock = __ARCH_SPIN_LOCK_UNLOCKED | 
|  | }; | 
|  | EXPORT_SYMBOL(rtas); | 
|  |  | 
|  | DEFINE_SPINLOCK(rtas_data_buf_lock); | 
|  | EXPORT_SYMBOL(rtas_data_buf_lock); | 
|  |  | 
|  | char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; | 
|  | EXPORT_SYMBOL(rtas_data_buf); | 
|  |  | 
|  | unsigned long rtas_rmo_buf; | 
|  |  | 
|  | /* | 
|  | * If non-NULL, this gets called when the kernel terminates. | 
|  | * This is done like this so rtas_flash can be a module. | 
|  | */ | 
|  | void (*rtas_flash_term_hook)(int); | 
|  | EXPORT_SYMBOL(rtas_flash_term_hook); | 
|  |  | 
|  | /* RTAS use home made raw locking instead of spin_lock_irqsave | 
|  | * because those can be called from within really nasty contexts | 
|  | * such as having the timebase stopped which would lockup with | 
|  | * normal locks and spinlock debugging enabled | 
|  | */ | 
|  | static unsigned long lock_rtas(void) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | preempt_disable(); | 
|  | arch_spin_lock_flags(&rtas.lock, flags); | 
|  | return flags; | 
|  | } | 
|  |  | 
|  | static void unlock_rtas(unsigned long flags) | 
|  | { | 
|  | arch_spin_unlock(&rtas.lock); | 
|  | local_irq_restore(flags); | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * call_rtas_display_status and call_rtas_display_status_delay | 
|  | * are designed only for very early low-level debugging, which | 
|  | * is why the token is hard-coded to 10. | 
|  | */ | 
|  | static void call_rtas_display_status(char c) | 
|  | { | 
|  | struct rtas_args *args = &rtas.args; | 
|  | unsigned long s; | 
|  |  | 
|  | if (!rtas.base) | 
|  | return; | 
|  | s = lock_rtas(); | 
|  |  | 
|  | args->token = 10; | 
|  | args->nargs = 1; | 
|  | args->nret  = 1; | 
|  | args->rets  = (rtas_arg_t *)&(args->args[1]); | 
|  | args->args[0] = (unsigned char)c; | 
|  |  | 
|  | enter_rtas(__pa(args)); | 
|  |  | 
|  | unlock_rtas(s); | 
|  | } | 
|  |  | 
|  | static void call_rtas_display_status_delay(char c) | 
|  | { | 
|  | static int pending_newline = 0;  /* did last write end with unprinted newline? */ | 
|  | static int width = 16; | 
|  |  | 
|  | if (c == '\n') { | 
|  | while (width-- > 0) | 
|  | call_rtas_display_status(' '); | 
|  | width = 16; | 
|  | mdelay(500); | 
|  | pending_newline = 1; | 
|  | } else { | 
|  | if (pending_newline) { | 
|  | call_rtas_display_status('\r'); | 
|  | call_rtas_display_status('\n'); | 
|  | } | 
|  | pending_newline = 0; | 
|  | if (width--) { | 
|  | call_rtas_display_status(c); | 
|  | udelay(10000); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init udbg_init_rtas_panel(void) | 
|  | { | 
|  | udbg_putc = call_rtas_display_status_delay; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_UDBG_RTAS_CONSOLE | 
|  |  | 
|  | /* If you think you're dying before early_init_dt_scan_rtas() does its | 
|  | * work, you can hard code the token values for your firmware here and | 
|  | * hardcode rtas.base/entry etc. | 
|  | */ | 
|  | static unsigned int rtas_putchar_token = RTAS_UNKNOWN_SERVICE; | 
|  | static unsigned int rtas_getchar_token = RTAS_UNKNOWN_SERVICE; | 
|  |  | 
|  | static void udbg_rtascon_putc(char c) | 
|  | { | 
|  | int tries; | 
|  |  | 
|  | if (!rtas.base) | 
|  | return; | 
|  |  | 
|  | /* Add CRs before LFs */ | 
|  | if (c == '\n') | 
|  | udbg_rtascon_putc('\r'); | 
|  |  | 
|  | /* if there is more than one character to be displayed, wait a bit */ | 
|  | for (tries = 0; tries < 16; tries++) { | 
|  | if (rtas_call(rtas_putchar_token, 1, 1, NULL, c) == 0) | 
|  | break; | 
|  | udelay(1000); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int udbg_rtascon_getc_poll(void) | 
|  | { | 
|  | int c; | 
|  |  | 
|  | if (!rtas.base) | 
|  | return -1; | 
|  |  | 
|  | if (rtas_call(rtas_getchar_token, 0, 2, &c)) | 
|  | return -1; | 
|  |  | 
|  | return c; | 
|  | } | 
|  |  | 
|  | static int udbg_rtascon_getc(void) | 
|  | { | 
|  | int c; | 
|  |  | 
|  | while ((c = udbg_rtascon_getc_poll()) == -1) | 
|  | ; | 
|  |  | 
|  | return c; | 
|  | } | 
|  |  | 
|  |  | 
|  | void __init udbg_init_rtas_console(void) | 
|  | { | 
|  | udbg_putc = udbg_rtascon_putc; | 
|  | udbg_getc = udbg_rtascon_getc; | 
|  | udbg_getc_poll = udbg_rtascon_getc_poll; | 
|  | } | 
|  | #endif /* CONFIG_UDBG_RTAS_CONSOLE */ | 
|  |  | 
|  | void rtas_progress(char *s, unsigned short hex) | 
|  | { | 
|  | struct device_node *root; | 
|  | int width; | 
|  | const int *p; | 
|  | char *os; | 
|  | static int display_character, set_indicator; | 
|  | static int display_width, display_lines, form_feed; | 
|  | static const int *row_width; | 
|  | static DEFINE_SPINLOCK(progress_lock); | 
|  | static int current_line; | 
|  | static int pending_newline = 0;  /* did last write end with unprinted newline? */ | 
|  |  | 
|  | if (!rtas.base) | 
|  | return; | 
|  |  | 
|  | if (display_width == 0) { | 
|  | display_width = 0x10; | 
|  | if ((root = of_find_node_by_path("/rtas"))) { | 
|  | if ((p = of_get_property(root, | 
|  | "ibm,display-line-length", NULL))) | 
|  | display_width = *p; | 
|  | if ((p = of_get_property(root, | 
|  | "ibm,form-feed", NULL))) | 
|  | form_feed = *p; | 
|  | if ((p = of_get_property(root, | 
|  | "ibm,display-number-of-lines", NULL))) | 
|  | display_lines = *p; | 
|  | row_width = of_get_property(root, | 
|  | "ibm,display-truncation-length", NULL); | 
|  | of_node_put(root); | 
|  | } | 
|  | display_character = rtas_token("display-character"); | 
|  | set_indicator = rtas_token("set-indicator"); | 
|  | } | 
|  |  | 
|  | if (display_character == RTAS_UNKNOWN_SERVICE) { | 
|  | /* use hex display if available */ | 
|  | if (set_indicator != RTAS_UNKNOWN_SERVICE) | 
|  | rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(&progress_lock); | 
|  |  | 
|  | /* | 
|  | * Last write ended with newline, but we didn't print it since | 
|  | * it would just clear the bottom line of output. Print it now | 
|  | * instead. | 
|  | * | 
|  | * If no newline is pending and form feed is supported, clear the | 
|  | * display with a form feed; otherwise, print a CR to start output | 
|  | * at the beginning of the line. | 
|  | */ | 
|  | if (pending_newline) { | 
|  | rtas_call(display_character, 1, 1, NULL, '\r'); | 
|  | rtas_call(display_character, 1, 1, NULL, '\n'); | 
|  | pending_newline = 0; | 
|  | } else { | 
|  | current_line = 0; | 
|  | if (form_feed) | 
|  | rtas_call(display_character, 1, 1, NULL, | 
|  | (char)form_feed); | 
|  | else | 
|  | rtas_call(display_character, 1, 1, NULL, '\r'); | 
|  | } | 
|  |  | 
|  | if (row_width) | 
|  | width = row_width[current_line]; | 
|  | else | 
|  | width = display_width; | 
|  | os = s; | 
|  | while (*os) { | 
|  | if (*os == '\n' || *os == '\r') { | 
|  | /* If newline is the last character, save it | 
|  | * until next call to avoid bumping up the | 
|  | * display output. | 
|  | */ | 
|  | if (*os == '\n' && !os[1]) { | 
|  | pending_newline = 1; | 
|  | current_line++; | 
|  | if (current_line > display_lines-1) | 
|  | current_line = display_lines-1; | 
|  | spin_unlock(&progress_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* RTAS wants CR-LF, not just LF */ | 
|  |  | 
|  | if (*os == '\n') { | 
|  | rtas_call(display_character, 1, 1, NULL, '\r'); | 
|  | rtas_call(display_character, 1, 1, NULL, '\n'); | 
|  | } else { | 
|  | /* CR might be used to re-draw a line, so we'll | 
|  | * leave it alone and not add LF. | 
|  | */ | 
|  | rtas_call(display_character, 1, 1, NULL, *os); | 
|  | } | 
|  |  | 
|  | if (row_width) | 
|  | width = row_width[current_line]; | 
|  | else | 
|  | width = display_width; | 
|  | } else { | 
|  | width--; | 
|  | rtas_call(display_character, 1, 1, NULL, *os); | 
|  | } | 
|  |  | 
|  | os++; | 
|  |  | 
|  | /* if we overwrite the screen length */ | 
|  | if (width <= 0) | 
|  | while ((*os != 0) && (*os != '\n') && (*os != '\r')) | 
|  | os++; | 
|  | } | 
|  |  | 
|  | spin_unlock(&progress_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_progress);		/* needed by rtas_flash module */ | 
|  |  | 
|  | int rtas_token(const char *service) | 
|  | { | 
|  | const int *tokp; | 
|  | if (rtas.dev == NULL) | 
|  | return RTAS_UNKNOWN_SERVICE; | 
|  | tokp = of_get_property(rtas.dev, service, NULL); | 
|  | return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_token); | 
|  |  | 
|  | int rtas_service_present(const char *service) | 
|  | { | 
|  | return rtas_token(service) != RTAS_UNKNOWN_SERVICE; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_service_present); | 
|  |  | 
|  | #ifdef CONFIG_RTAS_ERROR_LOGGING | 
|  | /* | 
|  | * Return the firmware-specified size of the error log buffer | 
|  | *  for all rtas calls that require an error buffer argument. | 
|  | *  This includes 'check-exception' and 'rtas-last-error'. | 
|  | */ | 
|  | int rtas_get_error_log_max(void) | 
|  | { | 
|  | static int rtas_error_log_max; | 
|  | if (rtas_error_log_max) | 
|  | return rtas_error_log_max; | 
|  |  | 
|  | rtas_error_log_max = rtas_token ("rtas-error-log-max"); | 
|  | if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) || | 
|  | (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) { | 
|  | printk (KERN_WARNING "RTAS: bad log buffer size %d\n", | 
|  | rtas_error_log_max); | 
|  | rtas_error_log_max = RTAS_ERROR_LOG_MAX; | 
|  | } | 
|  | return rtas_error_log_max; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_get_error_log_max); | 
|  |  | 
|  |  | 
|  | static char rtas_err_buf[RTAS_ERROR_LOG_MAX]; | 
|  | static int rtas_last_error_token; | 
|  |  | 
|  | /** Return a copy of the detailed error text associated with the | 
|  | *  most recent failed call to rtas.  Because the error text | 
|  | *  might go stale if there are any other intervening rtas calls, | 
|  | *  this routine must be called atomically with whatever produced | 
|  | *  the error (i.e. with rtas.lock still held from the previous call). | 
|  | */ | 
|  | static char *__fetch_rtas_last_error(char *altbuf) | 
|  | { | 
|  | struct rtas_args err_args, save_args; | 
|  | u32 bufsz; | 
|  | char *buf = NULL; | 
|  |  | 
|  | if (rtas_last_error_token == -1) | 
|  | return NULL; | 
|  |  | 
|  | bufsz = rtas_get_error_log_max(); | 
|  |  | 
|  | err_args.token = rtas_last_error_token; | 
|  | err_args.nargs = 2; | 
|  | err_args.nret = 1; | 
|  | err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf); | 
|  | err_args.args[1] = bufsz; | 
|  | err_args.args[2] = 0; | 
|  |  | 
|  | save_args = rtas.args; | 
|  | rtas.args = err_args; | 
|  |  | 
|  | enter_rtas(__pa(&rtas.args)); | 
|  |  | 
|  | err_args = rtas.args; | 
|  | rtas.args = save_args; | 
|  |  | 
|  | /* Log the error in the unlikely case that there was one. */ | 
|  | if (unlikely(err_args.args[2] == 0)) { | 
|  | if (altbuf) { | 
|  | buf = altbuf; | 
|  | } else { | 
|  | buf = rtas_err_buf; | 
|  | if (mem_init_done) | 
|  | buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); | 
|  | } | 
|  | if (buf) | 
|  | memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); | 
|  | } | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | #define get_errorlog_buffer()	kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL) | 
|  |  | 
|  | #else /* CONFIG_RTAS_ERROR_LOGGING */ | 
|  | #define __fetch_rtas_last_error(x)	NULL | 
|  | #define get_errorlog_buffer()		NULL | 
|  | #endif | 
|  |  | 
|  | int rtas_call(int token, int nargs, int nret, int *outputs, ...) | 
|  | { | 
|  | va_list list; | 
|  | int i; | 
|  | unsigned long s; | 
|  | struct rtas_args *rtas_args; | 
|  | char *buff_copy = NULL; | 
|  | int ret; | 
|  |  | 
|  | if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE) | 
|  | return -1; | 
|  |  | 
|  | s = lock_rtas(); | 
|  | rtas_args = &rtas.args; | 
|  |  | 
|  | rtas_args->token = token; | 
|  | rtas_args->nargs = nargs; | 
|  | rtas_args->nret  = nret; | 
|  | rtas_args->rets  = (rtas_arg_t *)&(rtas_args->args[nargs]); | 
|  | va_start(list, outputs); | 
|  | for (i = 0; i < nargs; ++i) | 
|  | rtas_args->args[i] = va_arg(list, rtas_arg_t); | 
|  | va_end(list); | 
|  |  | 
|  | for (i = 0; i < nret; ++i) | 
|  | rtas_args->rets[i] = 0; | 
|  |  | 
|  | enter_rtas(__pa(rtas_args)); | 
|  |  | 
|  | /* A -1 return code indicates that the last command couldn't | 
|  | be completed due to a hardware error. */ | 
|  | if (rtas_args->rets[0] == -1) | 
|  | buff_copy = __fetch_rtas_last_error(NULL); | 
|  |  | 
|  | if (nret > 1 && outputs != NULL) | 
|  | for (i = 0; i < nret-1; ++i) | 
|  | outputs[i] = rtas_args->rets[i+1]; | 
|  | ret = (nret > 0)? rtas_args->rets[0]: 0; | 
|  |  | 
|  | unlock_rtas(s); | 
|  |  | 
|  | if (buff_copy) { | 
|  | log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0); | 
|  | if (mem_init_done) | 
|  | kfree(buff_copy); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_call); | 
|  |  | 
|  | /* For RTAS_BUSY (-2), delay for 1 millisecond.  For an extended busy status | 
|  | * code of 990n, perform the hinted delay of 10^n (last digit) milliseconds. | 
|  | */ | 
|  | unsigned int rtas_busy_delay_time(int status) | 
|  | { | 
|  | int order; | 
|  | unsigned int ms = 0; | 
|  |  | 
|  | if (status == RTAS_BUSY) { | 
|  | ms = 1; | 
|  | } else if (status >= 9900 && status <= 9905) { | 
|  | order = status - 9900; | 
|  | for (ms = 1; order > 0; order--) | 
|  | ms *= 10; | 
|  | } | 
|  |  | 
|  | return ms; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_busy_delay_time); | 
|  |  | 
|  | /* For an RTAS busy status code, perform the hinted delay. */ | 
|  | unsigned int rtas_busy_delay(int status) | 
|  | { | 
|  | unsigned int ms; | 
|  |  | 
|  | might_sleep(); | 
|  | ms = rtas_busy_delay_time(status); | 
|  | if (ms && need_resched()) | 
|  | msleep(ms); | 
|  |  | 
|  | return ms; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_busy_delay); | 
|  |  | 
|  | static int rtas_error_rc(int rtas_rc) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | switch (rtas_rc) { | 
|  | case -1: 		/* Hardware Error */ | 
|  | rc = -EIO; | 
|  | break; | 
|  | case -3:		/* Bad indicator/domain/etc */ | 
|  | rc = -EINVAL; | 
|  | break; | 
|  | case -9000:		/* Isolation error */ | 
|  | rc = -EFAULT; | 
|  | break; | 
|  | case -9001:		/* Outstanding TCE/PTE */ | 
|  | rc = -EEXIST; | 
|  | break; | 
|  | case -9002:		/* No usable slot */ | 
|  | rc = -ENODEV; | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "%s: unexpected RTAS error %d\n", | 
|  | __func__, rtas_rc); | 
|  | rc = -ERANGE; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int rtas_get_power_level(int powerdomain, int *level) | 
|  | { | 
|  | int token = rtas_token("get-power-level"); | 
|  | int rc; | 
|  |  | 
|  | if (token == RTAS_UNKNOWN_SERVICE) | 
|  | return -ENOENT; | 
|  |  | 
|  | while ((rc = rtas_call(token, 1, 2, level, powerdomain)) == RTAS_BUSY) | 
|  | udelay(1); | 
|  |  | 
|  | if (rc < 0) | 
|  | return rtas_error_rc(rc); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_get_power_level); | 
|  |  | 
|  | int rtas_set_power_level(int powerdomain, int level, int *setlevel) | 
|  | { | 
|  | int token = rtas_token("set-power-level"); | 
|  | int rc; | 
|  |  | 
|  | if (token == RTAS_UNKNOWN_SERVICE) | 
|  | return -ENOENT; | 
|  |  | 
|  | do { | 
|  | rc = rtas_call(token, 2, 2, setlevel, powerdomain, level); | 
|  | } while (rtas_busy_delay(rc)); | 
|  |  | 
|  | if (rc < 0) | 
|  | return rtas_error_rc(rc); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_set_power_level); | 
|  |  | 
|  | int rtas_get_sensor(int sensor, int index, int *state) | 
|  | { | 
|  | int token = rtas_token("get-sensor-state"); | 
|  | int rc; | 
|  |  | 
|  | if (token == RTAS_UNKNOWN_SERVICE) | 
|  | return -ENOENT; | 
|  |  | 
|  | do { | 
|  | rc = rtas_call(token, 2, 2, state, sensor, index); | 
|  | } while (rtas_busy_delay(rc)); | 
|  |  | 
|  | if (rc < 0) | 
|  | return rtas_error_rc(rc); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_get_sensor); | 
|  |  | 
|  | bool rtas_indicator_present(int token, int *maxindex) | 
|  | { | 
|  | int proplen, count, i; | 
|  | const struct indicator_elem { | 
|  | u32 token; | 
|  | u32 maxindex; | 
|  | } *indicators; | 
|  |  | 
|  | indicators = of_get_property(rtas.dev, "rtas-indicators", &proplen); | 
|  | if (!indicators) | 
|  | return false; | 
|  |  | 
|  | count = proplen / sizeof(struct indicator_elem); | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | if (indicators[i].token != token) | 
|  | continue; | 
|  | if (maxindex) | 
|  | *maxindex = indicators[i].maxindex; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_indicator_present); | 
|  |  | 
|  | int rtas_set_indicator(int indicator, int index, int new_value) | 
|  | { | 
|  | int token = rtas_token("set-indicator"); | 
|  | int rc; | 
|  |  | 
|  | if (token == RTAS_UNKNOWN_SERVICE) | 
|  | return -ENOENT; | 
|  |  | 
|  | do { | 
|  | rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); | 
|  | } while (rtas_busy_delay(rc)); | 
|  |  | 
|  | if (rc < 0) | 
|  | return rtas_error_rc(rc); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(rtas_set_indicator); | 
|  |  | 
|  | /* | 
|  | * Ignoring RTAS extended delay | 
|  | */ | 
|  | int rtas_set_indicator_fast(int indicator, int index, int new_value) | 
|  | { | 
|  | int rc; | 
|  | int token = rtas_token("set-indicator"); | 
|  |  | 
|  | if (token == RTAS_UNKNOWN_SERVICE) | 
|  | return -ENOENT; | 
|  |  | 
|  | rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); | 
|  |  | 
|  | WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905)); | 
|  |  | 
|  | if (rc < 0) | 
|  | return rtas_error_rc(rc); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | void rtas_restart(char *cmd) | 
|  | { | 
|  | if (rtas_flash_term_hook) | 
|  | rtas_flash_term_hook(SYS_RESTART); | 
|  | printk("RTAS system-reboot returned %d\n", | 
|  | rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); | 
|  | for (;;); | 
|  | } | 
|  |  | 
|  | void rtas_power_off(void) | 
|  | { | 
|  | if (rtas_flash_term_hook) | 
|  | rtas_flash_term_hook(SYS_POWER_OFF); | 
|  | /* allow power on only with power button press */ | 
|  | printk("RTAS power-off returned %d\n", | 
|  | rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); | 
|  | for (;;); | 
|  | } | 
|  |  | 
|  | void rtas_halt(void) | 
|  | { | 
|  | if (rtas_flash_term_hook) | 
|  | rtas_flash_term_hook(SYS_HALT); | 
|  | /* allow power on only with power button press */ | 
|  | printk("RTAS power-off returned %d\n", | 
|  | rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); | 
|  | for (;;); | 
|  | } | 
|  |  | 
|  | /* Must be in the RMO region, so we place it here */ | 
|  | static char rtas_os_term_buf[2048]; | 
|  |  | 
|  | void rtas_os_term(char *str) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | /* | 
|  | * Firmware with the ibm,extended-os-term property is guaranteed | 
|  | * to always return from an ibm,os-term call. Earlier versions without | 
|  | * this property may terminate the partition which we want to avoid | 
|  | * since it interferes with panic_timeout. | 
|  | */ | 
|  | if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") || | 
|  | RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term")) | 
|  | return; | 
|  |  | 
|  | snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str); | 
|  |  | 
|  | do { | 
|  | status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL, | 
|  | __pa(rtas_os_term_buf)); | 
|  | } while (rtas_busy_delay(status)); | 
|  |  | 
|  | if (status != 0) | 
|  | printk(KERN_EMERG "ibm,os-term call failed %d\n", status); | 
|  | } | 
|  |  | 
|  | static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE; | 
|  | #ifdef CONFIG_PPC_PSERIES | 
|  | static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_when_done) | 
|  | { | 
|  | u16 slb_size = mmu_slb_size; | 
|  | int rc = H_MULTI_THREADS_ACTIVE; | 
|  | int cpu; | 
|  |  | 
|  | slb_set_size(SLB_MIN_SIZE); | 
|  | stop_topology_update(); | 
|  | printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); | 
|  |  | 
|  | while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && | 
|  | !atomic_read(&data->error)) | 
|  | rc = rtas_call(data->token, 0, 1, NULL); | 
|  |  | 
|  | if (rc || atomic_read(&data->error)) { | 
|  | printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc); | 
|  | slb_set_size(slb_size); | 
|  | } | 
|  |  | 
|  | if (atomic_read(&data->error)) | 
|  | rc = atomic_read(&data->error); | 
|  |  | 
|  | atomic_set(&data->error, rc); | 
|  | start_topology_update(); | 
|  | pSeries_coalesce_init(); | 
|  |  | 
|  | if (wake_when_done) { | 
|  | atomic_set(&data->done, 1); | 
|  |  | 
|  | for_each_online_cpu(cpu) | 
|  | plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); | 
|  | } | 
|  |  | 
|  | if (atomic_dec_return(&data->working) == 0) | 
|  | complete(data->complete); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data) | 
|  | { | 
|  | atomic_inc(&data->working); | 
|  | return __rtas_suspend_last_cpu(data, 0); | 
|  | } | 
|  |  | 
|  | static int __rtas_suspend_cpu(struct rtas_suspend_me_data *data, int wake_when_done) | 
|  | { | 
|  | long rc = H_SUCCESS; | 
|  | unsigned long msr_save; | 
|  | int cpu; | 
|  |  | 
|  | atomic_inc(&data->working); | 
|  |  | 
|  | /* really need to ensure MSR.EE is off for H_JOIN */ | 
|  | msr_save = mfmsr(); | 
|  | mtmsr(msr_save & ~(MSR_EE)); | 
|  |  | 
|  | while (rc == H_SUCCESS && !atomic_read(&data->done) && !atomic_read(&data->error)) | 
|  | rc = plpar_hcall_norets(H_JOIN); | 
|  |  | 
|  | mtmsr(msr_save); | 
|  |  | 
|  | if (rc == H_SUCCESS) { | 
|  | /* This cpu was prodded and the suspend is complete. */ | 
|  | goto out; | 
|  | } else if (rc == H_CONTINUE) { | 
|  | /* All other cpus are in H_JOIN, this cpu does | 
|  | * the suspend. | 
|  | */ | 
|  | return __rtas_suspend_last_cpu(data, wake_when_done); | 
|  | } else { | 
|  | printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", | 
|  | smp_processor_id(), rc); | 
|  | atomic_set(&data->error, rc); | 
|  | } | 
|  |  | 
|  | if (wake_when_done) { | 
|  | atomic_set(&data->done, 1); | 
|  |  | 
|  | /* This cpu did the suspend or got an error; in either case, | 
|  | * we need to prod all other other cpus out of join state. | 
|  | * Extra prods are harmless. | 
|  | */ | 
|  | for_each_online_cpu(cpu) | 
|  | plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); | 
|  | } | 
|  | out: | 
|  | if (atomic_dec_return(&data->working) == 0) | 
|  | complete(data->complete); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int rtas_suspend_cpu(struct rtas_suspend_me_data *data) | 
|  | { | 
|  | return __rtas_suspend_cpu(data, 0); | 
|  | } | 
|  |  | 
|  | static void rtas_percpu_suspend_me(void *info) | 
|  | { | 
|  | __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); | 
|  | } | 
|  |  | 
|  | int rtas_ibm_suspend_me(struct rtas_args *args) | 
|  | { | 
|  | long state; | 
|  | long rc; | 
|  | unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; | 
|  | struct rtas_suspend_me_data data; | 
|  | DECLARE_COMPLETION_ONSTACK(done); | 
|  |  | 
|  | if (!rtas_service_present("ibm,suspend-me")) | 
|  | return -ENOSYS; | 
|  |  | 
|  | /* Make sure the state is valid */ | 
|  | rc = plpar_hcall(H_VASI_STATE, retbuf, | 
|  | ((u64)args->args[0] << 32) | args->args[1]); | 
|  |  | 
|  | state = retbuf[0]; | 
|  |  | 
|  | if (rc) { | 
|  | printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned %ld\n",rc); | 
|  | return rc; | 
|  | } else if (state == H_VASI_ENABLED) { | 
|  | args->args[args->nargs] = RTAS_NOT_SUSPENDABLE; | 
|  | return 0; | 
|  | } else if (state != H_VASI_SUSPENDING) { | 
|  | printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned state %ld\n", | 
|  | state); | 
|  | args->args[args->nargs] = -1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | atomic_set(&data.working, 0); | 
|  | atomic_set(&data.done, 0); | 
|  | atomic_set(&data.error, 0); | 
|  | data.token = rtas_token("ibm,suspend-me"); | 
|  | data.complete = &done; | 
|  |  | 
|  | /* Call function on all CPUs.  One of us will make the | 
|  | * rtas call | 
|  | */ | 
|  | if (on_each_cpu(rtas_percpu_suspend_me, &data, 0)) | 
|  | atomic_set(&data.error, -EINVAL); | 
|  |  | 
|  | wait_for_completion(&done); | 
|  |  | 
|  | if (atomic_read(&data.error) != 0) | 
|  | printk(KERN_ERR "Error doing global join\n"); | 
|  |  | 
|  | return atomic_read(&data.error); | 
|  | } | 
|  | #else /* CONFIG_PPC_PSERIES */ | 
|  | int rtas_ibm_suspend_me(struct rtas_args *args) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | asmlinkage int ppc_rtas(struct rtas_args __user *uargs) | 
|  | { | 
|  | struct rtas_args args; | 
|  | unsigned long flags; | 
|  | char *buff_copy, *errbuf = NULL; | 
|  | int nargs; | 
|  | int rc; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0) | 
|  | return -EFAULT; | 
|  |  | 
|  | nargs = args.nargs; | 
|  | if (nargs > ARRAY_SIZE(args.args) | 
|  | || args.nret > ARRAY_SIZE(args.args) | 
|  | || nargs + args.nret > ARRAY_SIZE(args.args)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Copy in args. */ | 
|  | if (copy_from_user(args.args, uargs->args, | 
|  | nargs * sizeof(rtas_arg_t)) != 0) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (args.token == RTAS_UNKNOWN_SERVICE) | 
|  | return -EINVAL; | 
|  |  | 
|  | args.rets = &args.args[nargs]; | 
|  | memset(args.rets, 0, args.nret * sizeof(rtas_arg_t)); | 
|  |  | 
|  | /* Need to handle ibm,suspend_me call specially */ | 
|  | if (args.token == ibm_suspend_me_token) { | 
|  | rc = rtas_ibm_suspend_me(&args); | 
|  | if (rc) | 
|  | return rc; | 
|  | goto copy_return; | 
|  | } | 
|  |  | 
|  | buff_copy = get_errorlog_buffer(); | 
|  |  | 
|  | flags = lock_rtas(); | 
|  |  | 
|  | rtas.args = args; | 
|  | enter_rtas(__pa(&rtas.args)); | 
|  | args = rtas.args; | 
|  |  | 
|  | /* A -1 return code indicates that the last command couldn't | 
|  | be completed due to a hardware error. */ | 
|  | if (args.rets[0] == -1) | 
|  | errbuf = __fetch_rtas_last_error(buff_copy); | 
|  |  | 
|  | unlock_rtas(flags); | 
|  |  | 
|  | if (buff_copy) { | 
|  | if (errbuf) | 
|  | log_error(errbuf, ERR_TYPE_RTAS_LOG, 0); | 
|  | kfree(buff_copy); | 
|  | } | 
|  |  | 
|  | copy_return: | 
|  | /* Copy out args. */ | 
|  | if (copy_to_user(uargs->args + nargs, | 
|  | args.args + nargs, | 
|  | args.nret * sizeof(rtas_arg_t)) != 0) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call early during boot, before mem init or bootmem, to retrieve the RTAS | 
|  | * informations from the device-tree and allocate the RMO buffer for userland | 
|  | * accesses. | 
|  | */ | 
|  | void __init rtas_initialize(void) | 
|  | { | 
|  | unsigned long rtas_region = RTAS_INSTANTIATE_MAX; | 
|  |  | 
|  | /* Get RTAS dev node and fill up our "rtas" structure with infos | 
|  | * about it. | 
|  | */ | 
|  | rtas.dev = of_find_node_by_name(NULL, "rtas"); | 
|  | if (rtas.dev) { | 
|  | const u32 *basep, *entryp, *sizep; | 
|  |  | 
|  | basep = of_get_property(rtas.dev, "linux,rtas-base", NULL); | 
|  | sizep = of_get_property(rtas.dev, "rtas-size", NULL); | 
|  | if (basep != NULL && sizep != NULL) { | 
|  | rtas.base = *basep; | 
|  | rtas.size = *sizep; | 
|  | entryp = of_get_property(rtas.dev, | 
|  | "linux,rtas-entry", NULL); | 
|  | if (entryp == NULL) /* Ugh */ | 
|  | rtas.entry = rtas.base; | 
|  | else | 
|  | rtas.entry = *entryp; | 
|  | } else | 
|  | rtas.dev = NULL; | 
|  | } | 
|  | if (!rtas.dev) | 
|  | return; | 
|  |  | 
|  | /* If RTAS was found, allocate the RMO buffer for it and look for | 
|  | * the stop-self token if any | 
|  | */ | 
|  | #ifdef CONFIG_PPC64 | 
|  | if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { | 
|  | rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX); | 
|  | ibm_suspend_me_token = rtas_token("ibm,suspend-me"); | 
|  | } | 
|  | #endif | 
|  | rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); | 
|  |  | 
|  | #ifdef CONFIG_RTAS_ERROR_LOGGING | 
|  | rtas_last_error_token = rtas_token("rtas-last-error"); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | int __init early_init_dt_scan_rtas(unsigned long node, | 
|  | const char *uname, int depth, void *data) | 
|  | { | 
|  | u32 *basep, *entryp, *sizep; | 
|  |  | 
|  | if (depth != 1 || strcmp(uname, "rtas") != 0) | 
|  | return 0; | 
|  |  | 
|  | basep  = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); | 
|  | entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); | 
|  | sizep  = of_get_flat_dt_prop(node, "rtas-size", NULL); | 
|  |  | 
|  | if (basep && entryp && sizep) { | 
|  | rtas.base = *basep; | 
|  | rtas.entry = *entryp; | 
|  | rtas.size = *sizep; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_UDBG_RTAS_CONSOLE | 
|  | basep = of_get_flat_dt_prop(node, "put-term-char", NULL); | 
|  | if (basep) | 
|  | rtas_putchar_token = *basep; | 
|  |  | 
|  | basep = of_get_flat_dt_prop(node, "get-term-char", NULL); | 
|  | if (basep) | 
|  | rtas_getchar_token = *basep; | 
|  |  | 
|  | if (rtas_putchar_token != RTAS_UNKNOWN_SERVICE && | 
|  | rtas_getchar_token != RTAS_UNKNOWN_SERVICE) | 
|  | udbg_init_rtas_console(); | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* break now */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static arch_spinlock_t timebase_lock; | 
|  | static u64 timebase = 0; | 
|  |  | 
|  | void __cpuinit rtas_give_timebase(void) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | hard_irq_disable(); | 
|  | arch_spin_lock(&timebase_lock); | 
|  | rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); | 
|  | timebase = get_tb(); | 
|  | arch_spin_unlock(&timebase_lock); | 
|  |  | 
|  | while (timebase) | 
|  | barrier(); | 
|  | rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | void __cpuinit rtas_take_timebase(void) | 
|  | { | 
|  | while (!timebase) | 
|  | barrier(); | 
|  | arch_spin_lock(&timebase_lock); | 
|  | set_tb(timebase >> 32, timebase & 0xffffffff); | 
|  | timebase = 0; | 
|  | arch_spin_unlock(&timebase_lock); | 
|  | } |