|  | /* | 
|  | * Signal handling for 32bit PPC and 32bit tasks on 64bit PPC | 
|  | * | 
|  | *  PowerPC version | 
|  | *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
|  | * Copyright (C) 2001 IBM | 
|  | * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | 
|  | * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) | 
|  | * | 
|  | *  Derived from "arch/i386/kernel/signal.c" | 
|  | *    Copyright (C) 1991, 1992 Linus Torvalds | 
|  | *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or | 
|  | *  modify it under the terms of the GNU General Public License | 
|  | *  as published by the Free Software Foundation; either version | 
|  | *  2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/sched.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/elf.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ratelimit.h> | 
|  | #ifdef CONFIG_PPC64 | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/compat.h> | 
|  | #else | 
|  | #include <linux/wait.h> | 
|  | #include <linux/unistd.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/binfmts.h> | 
|  | #include <linux/freezer.h> | 
|  | #endif | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/cacheflush.h> | 
|  | #include <asm/syscalls.h> | 
|  | #include <asm/sigcontext.h> | 
|  | #include <asm/vdso.h> | 
|  | #ifdef CONFIG_PPC64 | 
|  | #include "ppc32.h" | 
|  | #include <asm/unistd.h> | 
|  | #else | 
|  | #include <asm/ucontext.h> | 
|  | #include <asm/pgtable.h> | 
|  | #endif | 
|  |  | 
|  | #include "signal.h" | 
|  |  | 
|  | #undef DEBUG_SIG | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | #define sys_sigsuspend	compat_sys_sigsuspend | 
|  | #define sys_rt_sigsuspend	compat_sys_rt_sigsuspend | 
|  | #define sys_rt_sigreturn	compat_sys_rt_sigreturn | 
|  | #define sys_sigaction	compat_sys_sigaction | 
|  | #define sys_swapcontext	compat_sys_swapcontext | 
|  | #define sys_sigreturn	compat_sys_sigreturn | 
|  |  | 
|  | #define old_sigaction	old_sigaction32 | 
|  | #define sigcontext	sigcontext32 | 
|  | #define mcontext	mcontext32 | 
|  | #define ucontext	ucontext32 | 
|  |  | 
|  | /* | 
|  | * Userspace code may pass a ucontext which doesn't include VSX added | 
|  | * at the end.  We need to check for this case. | 
|  | */ | 
|  | #define UCONTEXTSIZEWITHOUTVSX \ | 
|  | (sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32)) | 
|  |  | 
|  | /* | 
|  | * Returning 0 means we return to userspace via | 
|  | * ret_from_except and thus restore all user | 
|  | * registers from *regs.  This is what we need | 
|  | * to do when a signal has been delivered. | 
|  | */ | 
|  |  | 
|  | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32)) | 
|  | #undef __SIGNAL_FRAMESIZE | 
|  | #define __SIGNAL_FRAMESIZE	__SIGNAL_FRAMESIZE32 | 
|  | #undef ELF_NVRREG | 
|  | #define ELF_NVRREG	ELF_NVRREG32 | 
|  |  | 
|  | /* | 
|  | * Functions for flipping sigsets (thanks to brain dead generic | 
|  | * implementation that makes things simple for little endian only) | 
|  | */ | 
|  | static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) | 
|  | { | 
|  | compat_sigset_t	cset; | 
|  |  | 
|  | switch (_NSIG_WORDS) { | 
|  | case 4: cset.sig[5] = set->sig[3] & 0xffffffffull; | 
|  | cset.sig[7] = set->sig[3] >> 32; | 
|  | case 3: cset.sig[4] = set->sig[2] & 0xffffffffull; | 
|  | cset.sig[5] = set->sig[2] >> 32; | 
|  | case 2: cset.sig[2] = set->sig[1] & 0xffffffffull; | 
|  | cset.sig[3] = set->sig[1] >> 32; | 
|  | case 1: cset.sig[0] = set->sig[0] & 0xffffffffull; | 
|  | cset.sig[1] = set->sig[0] >> 32; | 
|  | } | 
|  | return copy_to_user(uset, &cset, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | static inline int get_sigset_t(sigset_t *set, | 
|  | const compat_sigset_t __user *uset) | 
|  | { | 
|  | compat_sigset_t s32; | 
|  |  | 
|  | if (copy_from_user(&s32, uset, sizeof(*uset))) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* | 
|  | * Swap the 2 words of the 64-bit sigset_t (they are stored | 
|  | * in the "wrong" endian in 32-bit user storage). | 
|  | */ | 
|  | switch (_NSIG_WORDS) { | 
|  | case 4: set->sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32); | 
|  | case 3: set->sig[2] = s32.sig[4] | (((long)s32.sig[5]) << 32); | 
|  | case 2: set->sig[1] = s32.sig[2] | (((long)s32.sig[3]) << 32); | 
|  | case 1: set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int get_old_sigaction(struct k_sigaction *new_ka, | 
|  | struct old_sigaction __user *act) | 
|  | { | 
|  | compat_old_sigset_t mask; | 
|  | compat_uptr_t handler, restorer; | 
|  |  | 
|  | if (get_user(handler, &act->sa_handler) || | 
|  | __get_user(restorer, &act->sa_restorer) || | 
|  | __get_user(new_ka->sa.sa_flags, &act->sa_flags) || | 
|  | __get_user(mask, &act->sa_mask)) | 
|  | return -EFAULT; | 
|  | new_ka->sa.sa_handler = compat_ptr(handler); | 
|  | new_ka->sa.sa_restorer = compat_ptr(restorer); | 
|  | siginitset(&new_ka->sa.sa_mask, mask); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define to_user_ptr(p)		ptr_to_compat(p) | 
|  | #define from_user_ptr(p)	compat_ptr(p) | 
|  |  | 
|  | static inline int save_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *frame) | 
|  | { | 
|  | elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
|  | int i; | 
|  |  | 
|  | WARN_ON(!FULL_REGS(regs)); | 
|  |  | 
|  | for (i = 0; i <= PT_RESULT; i ++) { | 
|  | if (i == 14 && !FULL_REGS(regs)) | 
|  | i = 32; | 
|  | if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i])) | 
|  | return -EFAULT; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int restore_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr) | 
|  | { | 
|  | elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i <= PT_RESULT; i++) { | 
|  | if ((i == PT_MSR) || (i == PT_SOFTE)) | 
|  | continue; | 
|  | if (__get_user(gregs[i], &sr->mc_gregs[i])) | 
|  | return -EFAULT; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else /* CONFIG_PPC64 */ | 
|  |  | 
|  | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) | 
|  |  | 
|  | static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set) | 
|  | { | 
|  | return copy_to_user(uset, set, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | static inline int get_sigset_t(sigset_t *set, const sigset_t __user *uset) | 
|  | { | 
|  | return copy_from_user(set, uset, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | static inline int get_old_sigaction(struct k_sigaction *new_ka, | 
|  | struct old_sigaction __user *act) | 
|  | { | 
|  | old_sigset_t mask; | 
|  |  | 
|  | if (!access_ok(VERIFY_READ, act, sizeof(*act)) || | 
|  | __get_user(new_ka->sa.sa_handler, &act->sa_handler) || | 
|  | __get_user(new_ka->sa.sa_restorer, &act->sa_restorer)) | 
|  | return -EFAULT; | 
|  | __get_user(new_ka->sa.sa_flags, &act->sa_flags); | 
|  | __get_user(mask, &act->sa_mask); | 
|  | siginitset(&new_ka->sa.sa_mask, mask); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define to_user_ptr(p)		((unsigned long)(p)) | 
|  | #define from_user_ptr(p)	((void __user *)(p)) | 
|  |  | 
|  | static inline int save_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *frame) | 
|  | { | 
|  | WARN_ON(!FULL_REGS(regs)); | 
|  | return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE); | 
|  | } | 
|  |  | 
|  | static inline int restore_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr) | 
|  | { | 
|  | /* copy up to but not including MSR */ | 
|  | if (__copy_from_user(regs, &sr->mc_gregs, | 
|  | PT_MSR * sizeof(elf_greg_t))) | 
|  | return -EFAULT; | 
|  | /* copy from orig_r3 (the word after the MSR) up to the end */ | 
|  | if (__copy_from_user(®s->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3], | 
|  | GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | /* | 
|  | * Atomically swap in the new signal mask, and wait for a signal. | 
|  | */ | 
|  | long sys_sigsuspend(old_sigset_t mask) | 
|  | { | 
|  | mask &= _BLOCKABLE; | 
|  | spin_lock_irq(¤t->sighand->siglock); | 
|  | current->saved_sigmask = current->blocked; | 
|  | siginitset(¤t->blocked, mask); | 
|  | recalc_sigpending(); | 
|  | spin_unlock_irq(¤t->sighand->siglock); | 
|  |  | 
|  | current->state = TASK_INTERRUPTIBLE; | 
|  | schedule(); | 
|  | set_restore_sigmask(); | 
|  | return -ERESTARTNOHAND; | 
|  | } | 
|  |  | 
|  | long sys_sigaction(int sig, struct old_sigaction __user *act, | 
|  | struct old_sigaction __user *oact) | 
|  | { | 
|  | struct k_sigaction new_ka, old_ka; | 
|  | int ret; | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | if (sig < 0) | 
|  | sig = -sig; | 
|  | #endif | 
|  |  | 
|  | if (act) { | 
|  | if (get_old_sigaction(&new_ka, act)) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | 
|  | if (!ret && oact) { | 
|  | if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || | 
|  | __put_user(to_user_ptr(old_ka.sa.sa_handler), | 
|  | &oact->sa_handler) || | 
|  | __put_user(to_user_ptr(old_ka.sa.sa_restorer), | 
|  | &oact->sa_restorer) || | 
|  | __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || | 
|  | __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * When we have signals to deliver, we set up on the | 
|  | * user stack, going down from the original stack pointer: | 
|  | *	an ABI gap of 56 words | 
|  | *	an mcontext struct | 
|  | *	a sigcontext struct | 
|  | *	a gap of __SIGNAL_FRAMESIZE bytes | 
|  | * | 
|  | * Each of these things must be a multiple of 16 bytes in size. The following | 
|  | * structure represent all of this except the __SIGNAL_FRAMESIZE gap | 
|  | * | 
|  | */ | 
|  | struct sigframe { | 
|  | struct sigcontext sctx;		/* the sigcontext */ | 
|  | struct mcontext	mctx;		/* all the register values */ | 
|  | /* | 
|  | * Programs using the rs6000/xcoff abi can save up to 19 gp | 
|  | * regs and 18 fp regs below sp before decrementing it. | 
|  | */ | 
|  | int			abigap[56]; | 
|  | }; | 
|  |  | 
|  | /* We use the mc_pad field for the signal return trampoline. */ | 
|  | #define tramp	mc_pad | 
|  |  | 
|  | /* | 
|  | *  When we have rt signals to deliver, we set up on the | 
|  | *  user stack, going down from the original stack pointer: | 
|  | *	one rt_sigframe struct (siginfo + ucontext + ABI gap) | 
|  | *	a gap of __SIGNAL_FRAMESIZE+16 bytes | 
|  | *  (the +16 is to get the siginfo and ucontext in the same | 
|  | *  positions as in older kernels). | 
|  | * | 
|  | *  Each of these things must be a multiple of 16 bytes in size. | 
|  | * | 
|  | */ | 
|  | struct rt_sigframe { | 
|  | #ifdef CONFIG_PPC64 | 
|  | compat_siginfo_t info; | 
|  | #else | 
|  | struct siginfo info; | 
|  | #endif | 
|  | struct ucontext	uc; | 
|  | /* | 
|  | * Programs using the rs6000/xcoff abi can save up to 19 gp | 
|  | * regs and 18 fp regs below sp before decrementing it. | 
|  | */ | 
|  | int			abigap[56]; | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_VSX | 
|  | unsigned long copy_fpr_to_user(void __user *to, | 
|  | struct task_struct *task) | 
|  | { | 
|  | double buf[ELF_NFPREG]; | 
|  | int i; | 
|  |  | 
|  | /* save FPR copy to local buffer then write to the thread_struct */ | 
|  | for (i = 0; i < (ELF_NFPREG - 1) ; i++) | 
|  | buf[i] = task->thread.TS_FPR(i); | 
|  | memcpy(&buf[i], &task->thread.fpscr, sizeof(double)); | 
|  | return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double)); | 
|  | } | 
|  |  | 
|  | unsigned long copy_fpr_from_user(struct task_struct *task, | 
|  | void __user *from) | 
|  | { | 
|  | double buf[ELF_NFPREG]; | 
|  | int i; | 
|  |  | 
|  | if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double))) | 
|  | return 1; | 
|  | for (i = 0; i < (ELF_NFPREG - 1) ; i++) | 
|  | task->thread.TS_FPR(i) = buf[i]; | 
|  | memcpy(&task->thread.fpscr, &buf[i], sizeof(double)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | unsigned long copy_vsx_to_user(void __user *to, | 
|  | struct task_struct *task) | 
|  | { | 
|  | double buf[ELF_NVSRHALFREG]; | 
|  | int i; | 
|  |  | 
|  | /* save FPR copy to local buffer then write to the thread_struct */ | 
|  | for (i = 0; i < ELF_NVSRHALFREG; i++) | 
|  | buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET]; | 
|  | return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double)); | 
|  | } | 
|  |  | 
|  | unsigned long copy_vsx_from_user(struct task_struct *task, | 
|  | void __user *from) | 
|  | { | 
|  | double buf[ELF_NVSRHALFREG]; | 
|  | int i; | 
|  |  | 
|  | if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double))) | 
|  | return 1; | 
|  | for (i = 0; i < ELF_NVSRHALFREG ; i++) | 
|  | task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | inline unsigned long copy_fpr_to_user(void __user *to, | 
|  | struct task_struct *task) | 
|  | { | 
|  | return __copy_to_user(to, task->thread.fpr, | 
|  | ELF_NFPREG * sizeof(double)); | 
|  | } | 
|  |  | 
|  | inline unsigned long copy_fpr_from_user(struct task_struct *task, | 
|  | void __user *from) | 
|  | { | 
|  | return __copy_from_user(task->thread.fpr, from, | 
|  | ELF_NFPREG * sizeof(double)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Save the current user registers on the user stack. | 
|  | * We only save the altivec/spe registers if the process has used | 
|  | * altivec/spe instructions at some point. | 
|  | */ | 
|  | static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, | 
|  | int sigret, int ctx_has_vsx_region) | 
|  | { | 
|  | unsigned long msr = regs->msr; | 
|  |  | 
|  | /* Make sure floating point registers are stored in regs */ | 
|  | flush_fp_to_thread(current); | 
|  |  | 
|  | /* save general registers */ | 
|  | if (save_general_regs(regs, frame)) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | /* save altivec registers */ | 
|  | if (current->thread.used_vr) { | 
|  | flush_altivec_to_thread(current); | 
|  | if (__copy_to_user(&frame->mc_vregs, current->thread.vr, | 
|  | ELF_NVRREG * sizeof(vector128))) | 
|  | return 1; | 
|  | /* set MSR_VEC in the saved MSR value to indicate that | 
|  | frame->mc_vregs contains valid data */ | 
|  | msr |= MSR_VEC; | 
|  | } | 
|  | /* else assert((regs->msr & MSR_VEC) == 0) */ | 
|  |  | 
|  | /* We always copy to/from vrsave, it's 0 if we don't have or don't | 
|  | * use altivec. Since VSCR only contains 32 bits saved in the least | 
|  | * significant bits of a vector, we "cheat" and stuff VRSAVE in the | 
|  | * most significant bits of that same vector. --BenH | 
|  | */ | 
|  | if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32])) | 
|  | return 1; | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  | if (copy_fpr_to_user(&frame->mc_fregs, current)) | 
|  | return 1; | 
|  | #ifdef CONFIG_VSX | 
|  | /* | 
|  | * Copy VSR 0-31 upper half from thread_struct to local | 
|  | * buffer, then write that to userspace.  Also set MSR_VSX in | 
|  | * the saved MSR value to indicate that frame->mc_vregs | 
|  | * contains valid data | 
|  | */ | 
|  | if (current->thread.used_vsr && ctx_has_vsx_region) { | 
|  | __giveup_vsx(current); | 
|  | if (copy_vsx_to_user(&frame->mc_vsregs, current)) | 
|  | return 1; | 
|  | msr |= MSR_VSX; | 
|  | } | 
|  | #endif /* CONFIG_VSX */ | 
|  | #ifdef CONFIG_SPE | 
|  | /* save spe registers */ | 
|  | if (current->thread.used_spe) { | 
|  | flush_spe_to_thread(current); | 
|  | if (__copy_to_user(&frame->mc_vregs, current->thread.evr, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | /* set MSR_SPE in the saved MSR value to indicate that | 
|  | frame->mc_vregs contains valid data */ | 
|  | msr |= MSR_SPE; | 
|  | } | 
|  | /* else assert((regs->msr & MSR_SPE) == 0) */ | 
|  |  | 
|  | /* We always copy to/from spefscr */ | 
|  | if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | if (__put_user(msr, &frame->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  | if (sigret) { | 
|  | /* Set up the sigreturn trampoline: li r0,sigret; sc */ | 
|  | if (__put_user(0x38000000UL + sigret, &frame->tramp[0]) | 
|  | || __put_user(0x44000002UL, &frame->tramp[1])) | 
|  | return 1; | 
|  | flush_icache_range((unsigned long) &frame->tramp[0], | 
|  | (unsigned long) &frame->tramp[2]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Restore the current user register values from the user stack, | 
|  | * (except for MSR). | 
|  | */ | 
|  | static long restore_user_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr, int sig) | 
|  | { | 
|  | long err; | 
|  | unsigned int save_r2 = 0; | 
|  | unsigned long msr; | 
|  | #ifdef CONFIG_VSX | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * restore general registers but not including MSR or SOFTE. Also | 
|  | * take care of keeping r2 (TLS) intact if not a signal | 
|  | */ | 
|  | if (!sig) | 
|  | save_r2 = (unsigned int)regs->gpr[2]; | 
|  | err = restore_general_regs(regs, sr); | 
|  | regs->trap = 0; | 
|  | err |= __get_user(msr, &sr->mc_gregs[PT_MSR]); | 
|  | if (!sig) | 
|  | regs->gpr[2] = (unsigned long) save_r2; | 
|  | if (err) | 
|  | return 1; | 
|  |  | 
|  | /* if doing signal return, restore the previous little-endian mode */ | 
|  | if (sig) | 
|  | regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); | 
|  |  | 
|  | /* | 
|  | * Do this before updating the thread state in | 
|  | * current->thread.fpr/vr/evr.  That way, if we get preempted | 
|  | * and another task grabs the FPU/Altivec/SPE, it won't be | 
|  | * tempted to save the current CPU state into the thread_struct | 
|  | * and corrupt what we are writing there. | 
|  | */ | 
|  | discard_lazy_cpu_state(); | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | /* | 
|  | * Force the process to reload the altivec registers from | 
|  | * current->thread when it next does altivec instructions | 
|  | */ | 
|  | regs->msr &= ~MSR_VEC; | 
|  | if (msr & MSR_VEC) { | 
|  | /* restore altivec registers from the stack */ | 
|  | if (__copy_from_user(current->thread.vr, &sr->mc_vregs, | 
|  | sizeof(sr->mc_vregs))) | 
|  | return 1; | 
|  | } else if (current->thread.used_vr) | 
|  | memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128)); | 
|  |  | 
|  | /* Always get VRSAVE back */ | 
|  | if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32])) | 
|  | return 1; | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  | if (copy_fpr_from_user(current, &sr->mc_fregs)) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_VSX | 
|  | /* | 
|  | * Force the process to reload the VSX registers from | 
|  | * current->thread when it next does VSX instruction. | 
|  | */ | 
|  | regs->msr &= ~MSR_VSX; | 
|  | if (msr & MSR_VSX) { | 
|  | /* | 
|  | * Restore altivec registers from the stack to a local | 
|  | * buffer, then write this out to the thread_struct | 
|  | */ | 
|  | if (copy_vsx_from_user(current, &sr->mc_vsregs)) | 
|  | return 1; | 
|  | } else if (current->thread.used_vsr) | 
|  | for (i = 0; i < 32 ; i++) | 
|  | current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; | 
|  | #endif /* CONFIG_VSX */ | 
|  | /* | 
|  | * force the process to reload the FP registers from | 
|  | * current->thread when it next does FP instructions | 
|  | */ | 
|  | regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); | 
|  |  | 
|  | #ifdef CONFIG_SPE | 
|  | /* force the process to reload the spe registers from | 
|  | current->thread when it next does spe instructions */ | 
|  | regs->msr &= ~MSR_SPE; | 
|  | if (msr & MSR_SPE) { | 
|  | /* restore spe registers from the stack */ | 
|  | if (__copy_from_user(current->thread.evr, &sr->mc_vregs, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | } else if (current->thread.used_spe) | 
|  | memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32)); | 
|  |  | 
|  | /* Always get SPEFSCR back */ | 
|  | if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | long compat_sys_rt_sigaction(int sig, const struct sigaction32 __user *act, | 
|  | struct sigaction32 __user *oact, size_t sigsetsize) | 
|  | { | 
|  | struct k_sigaction new_ka, old_ka; | 
|  | int ret; | 
|  |  | 
|  | /* XXX: Don't preclude handling different sized sigset_t's.  */ | 
|  | if (sigsetsize != sizeof(compat_sigset_t)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (act) { | 
|  | compat_uptr_t handler; | 
|  |  | 
|  | ret = get_user(handler, &act->sa_handler); | 
|  | new_ka.sa.sa_handler = compat_ptr(handler); | 
|  | ret |= get_sigset_t(&new_ka.sa.sa_mask, &act->sa_mask); | 
|  | ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); | 
|  | if (ret) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | 
|  | if (!ret && oact) { | 
|  | ret = put_user(to_user_ptr(old_ka.sa.sa_handler), &oact->sa_handler); | 
|  | ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask); | 
|  | ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: it is necessary to treat how as an unsigned int, with the | 
|  | * corresponding cast to a signed int to insure that the proper | 
|  | * conversion (sign extension) between the register representation | 
|  | * of a signed int (msr in 32-bit mode) and the register representation | 
|  | * of a signed int (msr in 64-bit mode) is performed. | 
|  | */ | 
|  | long compat_sys_rt_sigprocmask(u32 how, compat_sigset_t __user *set, | 
|  | compat_sigset_t __user *oset, size_t sigsetsize) | 
|  | { | 
|  | sigset_t s; | 
|  | sigset_t __user *up; | 
|  | int ret; | 
|  | mm_segment_t old_fs = get_fs(); | 
|  |  | 
|  | if (set) { | 
|  | if (get_sigset_t(&s, set)) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | set_fs(KERNEL_DS); | 
|  | /* This is valid because of the set_fs() */ | 
|  | up = (sigset_t __user *) &s; | 
|  | ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL, | 
|  | sigsetsize); | 
|  | set_fs(old_fs); | 
|  | if (ret) | 
|  | return ret; | 
|  | if (oset) { | 
|  | if (put_sigset_t(oset, &s)) | 
|  | return -EFAULT; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long compat_sys_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize) | 
|  | { | 
|  | sigset_t s; | 
|  | int ret; | 
|  | mm_segment_t old_fs = get_fs(); | 
|  |  | 
|  | set_fs(KERNEL_DS); | 
|  | /* The __user pointer cast is valid because of the set_fs() */ | 
|  | ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize); | 
|  | set_fs(old_fs); | 
|  | if (!ret) { | 
|  | if (put_sigset_t(set, &s)) | 
|  | return -EFAULT; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (!access_ok (VERIFY_WRITE, d, sizeof(*d))) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* If you change siginfo_t structure, please be sure | 
|  | * this code is fixed accordingly. | 
|  | * It should never copy any pad contained in the structure | 
|  | * to avoid security leaks, but must copy the generic | 
|  | * 3 ints plus the relevant union member. | 
|  | * This routine must convert siginfo from 64bit to 32bit as well | 
|  | * at the same time. | 
|  | */ | 
|  | err = __put_user(s->si_signo, &d->si_signo); | 
|  | err |= __put_user(s->si_errno, &d->si_errno); | 
|  | err |= __put_user((short)s->si_code, &d->si_code); | 
|  | if (s->si_code < 0) | 
|  | err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad, | 
|  | SI_PAD_SIZE32); | 
|  | else switch(s->si_code >> 16) { | 
|  | case __SI_CHLD >> 16: | 
|  | err |= __put_user(s->si_pid, &d->si_pid); | 
|  | err |= __put_user(s->si_uid, &d->si_uid); | 
|  | err |= __put_user(s->si_utime, &d->si_utime); | 
|  | err |= __put_user(s->si_stime, &d->si_stime); | 
|  | err |= __put_user(s->si_status, &d->si_status); | 
|  | break; | 
|  | case __SI_FAULT >> 16: | 
|  | err |= __put_user((unsigned int)(unsigned long)s->si_addr, | 
|  | &d->si_addr); | 
|  | break; | 
|  | case __SI_POLL >> 16: | 
|  | err |= __put_user(s->si_band, &d->si_band); | 
|  | err |= __put_user(s->si_fd, &d->si_fd); | 
|  | break; | 
|  | case __SI_TIMER >> 16: | 
|  | err |= __put_user(s->si_tid, &d->si_tid); | 
|  | err |= __put_user(s->si_overrun, &d->si_overrun); | 
|  | err |= __put_user(s->si_int, &d->si_int); | 
|  | break; | 
|  | case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */ | 
|  | case __SI_MESGQ >> 16: | 
|  | err |= __put_user(s->si_int, &d->si_int); | 
|  | /* fallthrough */ | 
|  | case __SI_KILL >> 16: | 
|  | default: | 
|  | err |= __put_user(s->si_pid, &d->si_pid); | 
|  | err |= __put_user(s->si_uid, &d->si_uid); | 
|  | break; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #define copy_siginfo_to_user	copy_siginfo_to_user32 | 
|  |  | 
|  | int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from) | 
|  | { | 
|  | memset(to, 0, sizeof *to); | 
|  |  | 
|  | if (copy_from_user(to, from, 3*sizeof(int)) || | 
|  | copy_from_user(to->_sifields._pad, | 
|  | from->_sifields._pad, SI_PAD_SIZE32)) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: it is necessary to treat pid and sig as unsigned ints, with the | 
|  | * corresponding cast to a signed int to insure that the proper conversion | 
|  | * (sign extension) between the register representation of a signed int | 
|  | * (msr in 32-bit mode) and the register representation of a signed int | 
|  | * (msr in 64-bit mode) is performed. | 
|  | */ | 
|  | long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo) | 
|  | { | 
|  | siginfo_t info; | 
|  | int ret; | 
|  | mm_segment_t old_fs = get_fs(); | 
|  |  | 
|  | ret = copy_siginfo_from_user32(&info, uinfo); | 
|  | if (unlikely(ret)) | 
|  | return ret; | 
|  |  | 
|  | set_fs (KERNEL_DS); | 
|  | /* The __user pointer cast is valid becasuse of the set_fs() */ | 
|  | ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info); | 
|  | set_fs (old_fs); | 
|  | return ret; | 
|  | } | 
|  | /* | 
|  | *  Start Alternate signal stack support | 
|  | * | 
|  | *  System Calls | 
|  | *       sigaltatck               compat_sys_sigaltstack | 
|  | */ | 
|  |  | 
|  | int compat_sys_sigaltstack(u32 __new, u32 __old, int r5, | 
|  | int r6, int r7, int r8, struct pt_regs *regs) | 
|  | { | 
|  | stack_32_t __user * newstack = compat_ptr(__new); | 
|  | stack_32_t __user * oldstack = compat_ptr(__old); | 
|  | stack_t uss, uoss; | 
|  | int ret; | 
|  | mm_segment_t old_fs; | 
|  | unsigned long sp; | 
|  | compat_uptr_t ss_sp; | 
|  |  | 
|  | /* | 
|  | * set sp to the user stack on entry to the system call | 
|  | * the system call router sets R9 to the saved registers | 
|  | */ | 
|  | sp = regs->gpr[1]; | 
|  |  | 
|  | /* Put new stack info in local 64 bit stack struct */ | 
|  | if (newstack) { | 
|  | if (get_user(ss_sp, &newstack->ss_sp) || | 
|  | __get_user(uss.ss_flags, &newstack->ss_flags) || | 
|  | __get_user(uss.ss_size, &newstack->ss_size)) | 
|  | return -EFAULT; | 
|  | uss.ss_sp = compat_ptr(ss_sp); | 
|  | } | 
|  |  | 
|  | old_fs = get_fs(); | 
|  | set_fs(KERNEL_DS); | 
|  | /* The __user pointer casts are valid because of the set_fs() */ | 
|  | ret = do_sigaltstack( | 
|  | newstack ? (stack_t __user *) &uss : NULL, | 
|  | oldstack ? (stack_t __user *) &uoss : NULL, | 
|  | sp); | 
|  | set_fs(old_fs); | 
|  | /* Copy the stack information to the user output buffer */ | 
|  | if (!ret && oldstack  && | 
|  | (put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) || | 
|  | __put_user(uoss.ss_flags, &oldstack->ss_flags) || | 
|  | __put_user(uoss.ss_size, &oldstack->ss_size))) | 
|  | return -EFAULT; | 
|  | return ret; | 
|  | } | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | /* | 
|  | * Set up a signal frame for a "real-time" signal handler | 
|  | * (one which gets siginfo). | 
|  | */ | 
|  | int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, | 
|  | siginfo_t *info, sigset_t *oldset, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct rt_sigframe __user *rt_sf; | 
|  | struct mcontext __user *frame; | 
|  | void __user *addr; | 
|  | unsigned long newsp = 0; | 
|  |  | 
|  | /* Set up Signal Frame */ | 
|  | /* Put a Real Time Context onto stack */ | 
|  | rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1); | 
|  | addr = rt_sf; | 
|  | if (unlikely(rt_sf == NULL)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Put the siginfo & fill in most of the ucontext */ | 
|  | if (copy_siginfo_to_user(&rt_sf->info, info) | 
|  | || __put_user(0, &rt_sf->uc.uc_flags) | 
|  | || __put_user(0, &rt_sf->uc.uc_link) | 
|  | || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp) | 
|  | || __put_user(sas_ss_flags(regs->gpr[1]), | 
|  | &rt_sf->uc.uc_stack.ss_flags) | 
|  | || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size) | 
|  | || __put_user(to_user_ptr(&rt_sf->uc.uc_mcontext), | 
|  | &rt_sf->uc.uc_regs) | 
|  | || put_sigset_t(&rt_sf->uc.uc_sigmask, oldset)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Save user registers on the stack */ | 
|  | frame = &rt_sf->uc.uc_mcontext; | 
|  | addr = frame; | 
|  | if (vdso32_rt_sigtramp && current->mm->context.vdso_base) { | 
|  | if (save_user_regs(regs, frame, 0, 1)) | 
|  | goto badframe; | 
|  | regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp; | 
|  | } else { | 
|  | if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1)) | 
|  | goto badframe; | 
|  | regs->link = (unsigned long) frame->tramp; | 
|  | } | 
|  |  | 
|  | current->thread.fpscr.val = 0;	/* turn off all fp exceptions */ | 
|  |  | 
|  | /* create a stack frame for the caller of the handler */ | 
|  | newsp = ((unsigned long)rt_sf) - (__SIGNAL_FRAMESIZE + 16); | 
|  | addr = (void __user *)regs->gpr[1]; | 
|  | if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Fill registers for signal handler */ | 
|  | regs->gpr[1] = newsp; | 
|  | regs->gpr[3] = sig; | 
|  | regs->gpr[4] = (unsigned long) &rt_sf->info; | 
|  | regs->gpr[5] = (unsigned long) &rt_sf->uc; | 
|  | regs->gpr[6] = (unsigned long) rt_sf; | 
|  | regs->nip = (unsigned long) ka->sa.sa_handler; | 
|  | /* enter the signal handler in big-endian mode */ | 
|  | regs->msr &= ~MSR_LE; | 
|  | return 1; | 
|  |  | 
|  | badframe: | 
|  | #ifdef DEBUG_SIG | 
|  | printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n", | 
|  | regs, frame, newsp); | 
|  | #endif | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in handle_rt_signal32: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | addr, regs->nip, regs->link); | 
|  |  | 
|  | force_sigsegv(sig, current); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig) | 
|  | { | 
|  | sigset_t set; | 
|  | struct mcontext __user *mcp; | 
|  |  | 
|  | if (get_sigset_t(&set, &ucp->uc_sigmask)) | 
|  | return -EFAULT; | 
|  | #ifdef CONFIG_PPC64 | 
|  | { | 
|  | u32 cmcp; | 
|  |  | 
|  | if (__get_user(cmcp, &ucp->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | /* no need to check access_ok(mcp), since mcp < 4GB */ | 
|  | } | 
|  | #else | 
|  | if (__get_user(mcp, &ucp->uc_regs)) | 
|  | return -EFAULT; | 
|  | if (!access_ok(VERIFY_READ, mcp, sizeof(*mcp))) | 
|  | return -EFAULT; | 
|  | #endif | 
|  | restore_sigmask(&set); | 
|  | if (restore_user_regs(regs, mcp, sig)) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long sys_swapcontext(struct ucontext __user *old_ctx, | 
|  | struct ucontext __user *new_ctx, | 
|  | int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) | 
|  | { | 
|  | unsigned char tmp; | 
|  | int ctx_has_vsx_region = 0; | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | unsigned long new_msr = 0; | 
|  |  | 
|  | if (new_ctx) { | 
|  | struct mcontext __user *mcp; | 
|  | u32 cmcp; | 
|  |  | 
|  | /* | 
|  | * Get pointer to the real mcontext.  No need for | 
|  | * access_ok since we are dealing with compat | 
|  | * pointers. | 
|  | */ | 
|  | if (__get_user(cmcp, &new_ctx->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | if (__get_user(new_msr, &mcp->mc_gregs[PT_MSR])) | 
|  | return -EFAULT; | 
|  | } | 
|  | /* | 
|  | * Check that the context is not smaller than the original | 
|  | * size (with VMX but without VSX) | 
|  | */ | 
|  | if (ctx_size < UCONTEXTSIZEWITHOUTVSX) | 
|  | return -EINVAL; | 
|  | /* | 
|  | * If the new context state sets the MSR VSX bits but | 
|  | * it doesn't provide VSX state. | 
|  | */ | 
|  | if ((ctx_size < sizeof(struct ucontext)) && | 
|  | (new_msr & MSR_VSX)) | 
|  | return -EINVAL; | 
|  | /* Does the context have enough room to store VSX data? */ | 
|  | if (ctx_size >= sizeof(struct ucontext)) | 
|  | ctx_has_vsx_region = 1; | 
|  | #else | 
|  | /* Context size is for future use. Right now, we only make sure | 
|  | * we are passed something we understand | 
|  | */ | 
|  | if (ctx_size < sizeof(struct ucontext)) | 
|  | return -EINVAL; | 
|  | #endif | 
|  | if (old_ctx != NULL) { | 
|  | struct mcontext __user *mctx; | 
|  |  | 
|  | /* | 
|  | * old_ctx might not be 16-byte aligned, in which | 
|  | * case old_ctx->uc_mcontext won't be either. | 
|  | * Because we have the old_ctx->uc_pad2 field | 
|  | * before old_ctx->uc_mcontext, we need to round down | 
|  | * from &old_ctx->uc_mcontext to a 16-byte boundary. | 
|  | */ | 
|  | mctx = (struct mcontext __user *) | 
|  | ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL); | 
|  | if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size) | 
|  | || save_user_regs(regs, mctx, 0, ctx_has_vsx_region) | 
|  | || put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked) | 
|  | || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs)) | 
|  | return -EFAULT; | 
|  | } | 
|  | if (new_ctx == NULL) | 
|  | return 0; | 
|  | if (!access_ok(VERIFY_READ, new_ctx, ctx_size) | 
|  | || __get_user(tmp, (u8 __user *) new_ctx) | 
|  | || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1)) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* | 
|  | * If we get a fault copying the context into the kernel's | 
|  | * image of the user's registers, we can't just return -EFAULT | 
|  | * because the user's registers will be corrupted.  For instance | 
|  | * the NIP value may have been updated but not some of the | 
|  | * other registers.  Given that we have done the access_ok | 
|  | * and successfully read the first and last bytes of the region | 
|  | * above, this should only happen in an out-of-memory situation | 
|  | * or if another thread unmaps the region containing the context. | 
|  | * We kill the task with a SIGSEGV in this situation. | 
|  | */ | 
|  | if (do_setcontext(new_ctx, regs, 0)) | 
|  | do_exit(SIGSEGV); | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct rt_sigframe __user *rt_sf; | 
|  |  | 
|  | /* Always make any pending restarted system calls return -EINTR */ | 
|  | current_thread_info()->restart_block.fn = do_no_restart_syscall; | 
|  |  | 
|  | rt_sf = (struct rt_sigframe __user *) | 
|  | (regs->gpr[1] + __SIGNAL_FRAMESIZE + 16); | 
|  | if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf))) | 
|  | goto bad; | 
|  | if (do_setcontext(&rt_sf->uc, regs, 1)) | 
|  | goto bad; | 
|  |  | 
|  | /* | 
|  | * It's not clear whether or why it is desirable to save the | 
|  | * sigaltstack setting on signal delivery and restore it on | 
|  | * signal return.  But other architectures do this and we have | 
|  | * always done it up until now so it is probably better not to | 
|  | * change it.  -- paulus | 
|  | */ | 
|  | #ifdef CONFIG_PPC64 | 
|  | /* | 
|  | * We use the compat_sys_ version that does the 32/64 bits conversion | 
|  | * and takes userland pointer directly. What about error checking ? | 
|  | * nobody does any... | 
|  | */ | 
|  | compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs); | 
|  | #else | 
|  | do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]); | 
|  | #endif | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  |  | 
|  | bad: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in sys_rt_sigreturn: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | rt_sf, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV, current); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC32 | 
|  | int sys_debug_setcontext(struct ucontext __user *ctx, | 
|  | int ndbg, struct sig_dbg_op __user *dbg, | 
|  | int r6, int r7, int r8, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct sig_dbg_op op; | 
|  | int i; | 
|  | unsigned char tmp; | 
|  | unsigned long new_msr = regs->msr; | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | unsigned long new_dbcr0 = current->thread.dbcr0; | 
|  | #endif | 
|  |  | 
|  | for (i=0; i<ndbg; i++) { | 
|  | if (copy_from_user(&op, dbg + i, sizeof(op))) | 
|  | return -EFAULT; | 
|  | switch (op.dbg_type) { | 
|  | case SIG_DBG_SINGLE_STEPPING: | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | if (op.dbg_value) { | 
|  | new_msr |= MSR_DE; | 
|  | new_dbcr0 |= (DBCR0_IDM | DBCR0_IC); | 
|  | } else { | 
|  | new_dbcr0 &= ~DBCR0_IC; | 
|  | if (!DBCR_ACTIVE_EVENTS(new_dbcr0, | 
|  | current->thread.dbcr1)) { | 
|  | new_msr &= ~MSR_DE; | 
|  | new_dbcr0 &= ~DBCR0_IDM; | 
|  | } | 
|  | } | 
|  | #else | 
|  | if (op.dbg_value) | 
|  | new_msr |= MSR_SE; | 
|  | else | 
|  | new_msr &= ~MSR_SE; | 
|  | #endif | 
|  | break; | 
|  | case SIG_DBG_BRANCH_TRACING: | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | return -EINVAL; | 
|  | #else | 
|  | if (op.dbg_value) | 
|  | new_msr |= MSR_BE; | 
|  | else | 
|  | new_msr &= ~MSR_BE; | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* We wait until here to actually install the values in the | 
|  | registers so if we fail in the above loop, it will not | 
|  | affect the contents of these registers.  After this point, | 
|  | failure is a problem, anyway, and it's very unlikely unless | 
|  | the user is really doing something wrong. */ | 
|  | regs->msr = new_msr; | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | current->thread.dbcr0 = new_dbcr0; | 
|  | #endif | 
|  |  | 
|  | if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) | 
|  | || __get_user(tmp, (u8 __user *) ctx) | 
|  | || __get_user(tmp, (u8 __user *) (ctx + 1) - 1)) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* | 
|  | * If we get a fault copying the context into the kernel's | 
|  | * image of the user's registers, we can't just return -EFAULT | 
|  | * because the user's registers will be corrupted.  For instance | 
|  | * the NIP value may have been updated but not some of the | 
|  | * other registers.  Given that we have done the access_ok | 
|  | * and successfully read the first and last bytes of the region | 
|  | * above, this should only happen in an out-of-memory situation | 
|  | * or if another thread unmaps the region containing the context. | 
|  | * We kill the task with a SIGSEGV in this situation. | 
|  | */ | 
|  | if (do_setcontext(ctx, regs, 1)) { | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO "%s[%d]: bad frame in " | 
|  | "sys_debug_setcontext: %p nip %08lx " | 
|  | "lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | ctx, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV, current); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * It's not clear whether or why it is desirable to save the | 
|  | * sigaltstack setting on signal delivery and restore it on | 
|  | * signal return.  But other architectures do this and we have | 
|  | * always done it up until now so it is probably better not to | 
|  | * change it.  -- paulus | 
|  | */ | 
|  | do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]); | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | out: | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * OK, we're invoking a handler | 
|  | */ | 
|  | int handle_signal32(unsigned long sig, struct k_sigaction *ka, | 
|  | siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) | 
|  | { | 
|  | struct sigcontext __user *sc; | 
|  | struct sigframe __user *frame; | 
|  | unsigned long newsp = 0; | 
|  |  | 
|  | /* Set up Signal Frame */ | 
|  | frame = get_sigframe(ka, regs, sizeof(*frame), 1); | 
|  | if (unlikely(frame == NULL)) | 
|  | goto badframe; | 
|  | sc = (struct sigcontext __user *) &frame->sctx; | 
|  |  | 
|  | #if _NSIG != 64 | 
|  | #error "Please adjust handle_signal()" | 
|  | #endif | 
|  | if (__put_user(to_user_ptr(ka->sa.sa_handler), &sc->handler) | 
|  | || __put_user(oldset->sig[0], &sc->oldmask) | 
|  | #ifdef CONFIG_PPC64 | 
|  | || __put_user((oldset->sig[0] >> 32), &sc->_unused[3]) | 
|  | #else | 
|  | || __put_user(oldset->sig[1], &sc->_unused[3]) | 
|  | #endif | 
|  | || __put_user(to_user_ptr(&frame->mctx), &sc->regs) | 
|  | || __put_user(sig, &sc->signal)) | 
|  | goto badframe; | 
|  |  | 
|  | if (vdso32_sigtramp && current->mm->context.vdso_base) { | 
|  | if (save_user_regs(regs, &frame->mctx, 0, 1)) | 
|  | goto badframe; | 
|  | regs->link = current->mm->context.vdso_base + vdso32_sigtramp; | 
|  | } else { | 
|  | if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1)) | 
|  | goto badframe; | 
|  | regs->link = (unsigned long) frame->mctx.tramp; | 
|  | } | 
|  |  | 
|  | current->thread.fpscr.val = 0;	/* turn off all fp exceptions */ | 
|  |  | 
|  | /* create a stack frame for the caller of the handler */ | 
|  | newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE; | 
|  | if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
|  | goto badframe; | 
|  |  | 
|  | regs->gpr[1] = newsp; | 
|  | regs->gpr[3] = sig; | 
|  | regs->gpr[4] = (unsigned long) sc; | 
|  | regs->nip = (unsigned long) ka->sa.sa_handler; | 
|  | /* enter the signal handler in big-endian mode */ | 
|  | regs->msr &= ~MSR_LE; | 
|  |  | 
|  | return 1; | 
|  |  | 
|  | badframe: | 
|  | #ifdef DEBUG_SIG | 
|  | printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n", | 
|  | regs, frame, newsp); | 
|  | #endif | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in handle_signal32: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | frame, regs->nip, regs->link); | 
|  |  | 
|  | force_sigsegv(sig, current); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do a signal return; undo the signal stack. | 
|  | */ | 
|  | long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct sigcontext __user *sc; | 
|  | struct sigcontext sigctx; | 
|  | struct mcontext __user *sr; | 
|  | void __user *addr; | 
|  | sigset_t set; | 
|  |  | 
|  | /* Always make any pending restarted system calls return -EINTR */ | 
|  | current_thread_info()->restart_block.fn = do_no_restart_syscall; | 
|  |  | 
|  | sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE); | 
|  | addr = sc; | 
|  | if (copy_from_user(&sigctx, sc, sizeof(sigctx))) | 
|  | goto badframe; | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | /* | 
|  | * Note that PPC32 puts the upper 32 bits of the sigmask in the | 
|  | * unused part of the signal stackframe | 
|  | */ | 
|  | set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32); | 
|  | #else | 
|  | set.sig[0] = sigctx.oldmask; | 
|  | set.sig[1] = sigctx._unused[3]; | 
|  | #endif | 
|  | restore_sigmask(&set); | 
|  |  | 
|  | sr = (struct mcontext __user *)from_user_ptr(sigctx.regs); | 
|  | addr = sr; | 
|  | if (!access_ok(VERIFY_READ, sr, sizeof(*sr)) | 
|  | || restore_user_regs(regs, sr, 1)) | 
|  | goto badframe; | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  |  | 
|  | badframe: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in sys_sigreturn: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | addr, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV, current); | 
|  | return 0; | 
|  | } |