OMAP2/3 board-*.c files: read bootloader configuration earlier
Most board-*.c files read configuration data from the bootloader in
their .init_machine() function. This needs to happen earlier, at some
point before omap2_init_common_hw() is called. This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index eb78e6e..9917d2f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -357,14 +357,6 @@
return 0;
}
-static void __init overo_init_irq(void)
-{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- omap_init_irq();
- omap_gpio_init();
-}
-
static struct platform_device overo_lcd_device = {
.name = "overo_lcd",
.id = -1,
@@ -378,6 +370,16 @@
{ OMAP_TAG_LCD, &overo_lcd_config },
};
+static void __init overo_init_irq(void)
+{
+ omap_board_config = overo_config;
+ omap_board_config_size = ARRAY_SIZE(overo_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
@@ -386,8 +388,6 @@
{
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
- omap_board_config = overo_config;
- omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
overo_flash_init();
usb_musb_init();