|  | /* | 
|  | * | 
|  | *  Generic Bluetooth USB driver | 
|  | * | 
|  | *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org> | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/skbuff.h> | 
|  |  | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  | #define VERSION "0.6" | 
|  |  | 
|  | static int ignore_dga; | 
|  | static int ignore_csr; | 
|  | static int ignore_sniffer; | 
|  | static int disable_scofix; | 
|  | static int force_scofix; | 
|  |  | 
|  | static int reset = 1; | 
|  |  | 
|  | static struct usb_driver btusb_driver; | 
|  |  | 
|  | #define BTUSB_IGNORE		0x01 | 
|  | #define BTUSB_DIGIANSWER	0x02 | 
|  | #define BTUSB_CSR		0x04 | 
|  | #define BTUSB_SNIFFER		0x08 | 
|  | #define BTUSB_BCM92035		0x10 | 
|  | #define BTUSB_BROKEN_ISOC	0x20 | 
|  | #define BTUSB_WRONG_SCO_MTU	0x40 | 
|  |  | 
|  | static struct usb_device_id btusb_table[] = { | 
|  | /* Generic Bluetooth USB device */ | 
|  | { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, | 
|  |  | 
|  | /* AVM BlueFRITZ! USB v2.0 */ | 
|  | { USB_DEVICE(0x057c, 0x3800) }, | 
|  |  | 
|  | /* Bluetooth Ultraport Module from IBM */ | 
|  | { USB_DEVICE(0x04bf, 0x030a) }, | 
|  |  | 
|  | /* ALPS Modules with non-standard id */ | 
|  | { USB_DEVICE(0x044e, 0x3001) }, | 
|  | { USB_DEVICE(0x044e, 0x3002) }, | 
|  |  | 
|  | /* Ericsson with non-standard id */ | 
|  | { USB_DEVICE(0x0bdb, 0x1002) }, | 
|  |  | 
|  | /* Canyon CN-BTU1 with HID interfaces */ | 
|  | { USB_DEVICE(0x0c10, 0x0000) }, | 
|  |  | 
|  | { }	/* Terminating entry */ | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(usb, btusb_table); | 
|  |  | 
|  | static struct usb_device_id blacklist_table[] = { | 
|  | /* CSR BlueCore devices */ | 
|  | { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, | 
|  |  | 
|  | /* Broadcom BCM2033 without firmware */ | 
|  | { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, | 
|  |  | 
|  | /* Broadcom BCM2035 */ | 
|  | { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, | 
|  |  | 
|  | /* Broadcom BCM2045 */ | 
|  | { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* IBM/Lenovo ThinkPad with Broadcom chip */ | 
|  | { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* HP laptop with Broadcom chip */ | 
|  | { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* Dell laptop with Broadcom chip */ | 
|  | { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* Dell Wireless 370 and 410 devices */ | 
|  | { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* Belkin F8T012 and F8T013 devices */ | 
|  | { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  | { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* Asus WL-BTD202 device */ | 
|  | { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* Kensington Bluetooth USB adapter */ | 
|  | { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, | 
|  |  | 
|  | /* RTX Telecom based adapters with buggy SCO support */ | 
|  | { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, | 
|  | { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, | 
|  |  | 
|  | /* CONWISE Technology based adapters with buggy SCO support */ | 
|  | { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, | 
|  |  | 
|  | /* Digianswer devices */ | 
|  | { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, | 
|  | { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, | 
|  |  | 
|  | /* CSR BlueCore Bluetooth Sniffer */ | 
|  | { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER }, | 
|  |  | 
|  | /* Frontline ComProbe Bluetooth Sniffer */ | 
|  | { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, | 
|  |  | 
|  | { }	/* Terminating entry */ | 
|  | }; | 
|  |  | 
|  | #define BTUSB_MAX_ISOC_FRAMES	10 | 
|  |  | 
|  | #define BTUSB_INTR_RUNNING	0 | 
|  | #define BTUSB_BULK_RUNNING	1 | 
|  | #define BTUSB_ISOC_RUNNING	2 | 
|  | #define BTUSB_SUSPENDING	3 | 
|  |  | 
|  | struct btusb_data { | 
|  | struct hci_dev       *hdev; | 
|  | struct usb_device    *udev; | 
|  | struct usb_interface *intf; | 
|  | struct usb_interface *isoc; | 
|  |  | 
|  | spinlock_t lock; | 
|  |  | 
|  | unsigned long flags; | 
|  |  | 
|  | struct work_struct work; | 
|  | struct work_struct waker; | 
|  |  | 
|  | struct usb_anchor tx_anchor; | 
|  | struct usb_anchor intr_anchor; | 
|  | struct usb_anchor bulk_anchor; | 
|  | struct usb_anchor isoc_anchor; | 
|  | struct usb_anchor deferred; | 
|  | int tx_in_flight; | 
|  | spinlock_t txlock; | 
|  |  | 
|  | struct usb_endpoint_descriptor *intr_ep; | 
|  | struct usb_endpoint_descriptor *bulk_tx_ep; | 
|  | struct usb_endpoint_descriptor *bulk_rx_ep; | 
|  | struct usb_endpoint_descriptor *isoc_tx_ep; | 
|  | struct usb_endpoint_descriptor *isoc_rx_ep; | 
|  |  | 
|  | __u8 cmdreq_type; | 
|  |  | 
|  | unsigned int sco_num; | 
|  | int isoc_altsetting; | 
|  | int suspend_count; | 
|  | int did_iso_resume:1; | 
|  | }; | 
|  |  | 
|  | static int inc_tx(struct btusb_data *data) | 
|  | { | 
|  | unsigned long flags; | 
|  | int rv; | 
|  |  | 
|  | spin_lock_irqsave(&data->txlock, flags); | 
|  | rv = test_bit(BTUSB_SUSPENDING, &data->flags); | 
|  | if (!rv) | 
|  | data->tx_in_flight++; | 
|  | spin_unlock_irqrestore(&data->txlock, flags); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static void btusb_intr_complete(struct urb *urb) | 
|  | { | 
|  | struct hci_dev *hdev = urb->context; | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s urb %p status %d count %d", hdev->name, | 
|  | urb, urb->status, urb->actual_length); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | return; | 
|  |  | 
|  | if (urb->status == 0) { | 
|  | hdev->stat.byte_rx += urb->actual_length; | 
|  |  | 
|  | if (hci_recv_fragment(hdev, HCI_EVENT_PKT, | 
|  | urb->transfer_buffer, | 
|  | urb->actual_length) < 0) { | 
|  | BT_ERR("%s corrupted event packet", hdev->name); | 
|  | hdev->stat.err_rx++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) | 
|  | return; | 
|  |  | 
|  | usb_mark_last_busy(data->udev); | 
|  | usb_anchor_urb(urb, &data->intr_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p failed to resubmit (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | struct urb *urb; | 
|  | unsigned char *buf; | 
|  | unsigned int pipe; | 
|  | int err, size; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!data->intr_ep) | 
|  | return -ENODEV; | 
|  |  | 
|  | urb = usb_alloc_urb(0, mem_flags); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | size = le16_to_cpu(data->intr_ep->wMaxPacketSize); | 
|  |  | 
|  | buf = kmalloc(size, mem_flags); | 
|  | if (!buf) { | 
|  | usb_free_urb(urb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); | 
|  |  | 
|  | usb_fill_int_urb(urb, data->udev, pipe, buf, size, | 
|  | btusb_intr_complete, hdev, | 
|  | data->intr_ep->bInterval); | 
|  |  | 
|  | urb->transfer_flags |= URB_FREE_BUFFER; | 
|  |  | 
|  | usb_anchor_urb(urb, &data->intr_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, mem_flags); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p submission failed (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  |  | 
|  | usb_free_urb(urb); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void btusb_bulk_complete(struct urb *urb) | 
|  | { | 
|  | struct hci_dev *hdev = urb->context; | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s urb %p status %d count %d", hdev->name, | 
|  | urb, urb->status, urb->actual_length); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | return; | 
|  |  | 
|  | if (urb->status == 0) { | 
|  | hdev->stat.byte_rx += urb->actual_length; | 
|  |  | 
|  | if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT, | 
|  | urb->transfer_buffer, | 
|  | urb->actual_length) < 0) { | 
|  | BT_ERR("%s corrupted ACL packet", hdev->name); | 
|  | hdev->stat.err_rx++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) | 
|  | return; | 
|  |  | 
|  | usb_anchor_urb(urb, &data->bulk_anchor); | 
|  | usb_mark_last_busy(data->udev); | 
|  |  | 
|  | err = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p failed to resubmit (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | struct urb *urb; | 
|  | unsigned char *buf; | 
|  | unsigned int pipe; | 
|  | int err, size = HCI_MAX_FRAME_SIZE; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!data->bulk_rx_ep) | 
|  | return -ENODEV; | 
|  |  | 
|  | urb = usb_alloc_urb(0, mem_flags); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | buf = kmalloc(size, mem_flags); | 
|  | if (!buf) { | 
|  | usb_free_urb(urb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); | 
|  |  | 
|  | usb_fill_bulk_urb(urb, data->udev, pipe, | 
|  | buf, size, btusb_bulk_complete, hdev); | 
|  |  | 
|  | urb->transfer_flags |= URB_FREE_BUFFER; | 
|  |  | 
|  | usb_mark_last_busy(data->udev); | 
|  | usb_anchor_urb(urb, &data->bulk_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, mem_flags); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p submission failed (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  |  | 
|  | usb_free_urb(urb); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void btusb_isoc_complete(struct urb *urb) | 
|  | { | 
|  | struct hci_dev *hdev = urb->context; | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | int i, err; | 
|  |  | 
|  | BT_DBG("%s urb %p status %d count %d", hdev->name, | 
|  | urb, urb->status, urb->actual_length); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | return; | 
|  |  | 
|  | if (urb->status == 0) { | 
|  | for (i = 0; i < urb->number_of_packets; i++) { | 
|  | unsigned int offset = urb->iso_frame_desc[i].offset; | 
|  | unsigned int length = urb->iso_frame_desc[i].actual_length; | 
|  |  | 
|  | if (urb->iso_frame_desc[i].status) | 
|  | continue; | 
|  |  | 
|  | hdev->stat.byte_rx += length; | 
|  |  | 
|  | if (hci_recv_fragment(hdev, HCI_SCODATA_PKT, | 
|  | urb->transfer_buffer + offset, | 
|  | length) < 0) { | 
|  | BT_ERR("%s corrupted SCO packet", hdev->name); | 
|  | hdev->stat.err_rx++; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) | 
|  | return; | 
|  |  | 
|  | usb_anchor_urb(urb, &data->isoc_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p failed to resubmit (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu) | 
|  | { | 
|  | int i, offset = 0; | 
|  |  | 
|  | BT_DBG("len %d mtu %d", len, mtu); | 
|  |  | 
|  | for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; | 
|  | i++, offset += mtu, len -= mtu) { | 
|  | urb->iso_frame_desc[i].offset = offset; | 
|  | urb->iso_frame_desc[i].length = mtu; | 
|  | } | 
|  |  | 
|  | if (len && i < BTUSB_MAX_ISOC_FRAMES) { | 
|  | urb->iso_frame_desc[i].offset = offset; | 
|  | urb->iso_frame_desc[i].length = len; | 
|  | i++; | 
|  | } | 
|  |  | 
|  | urb->number_of_packets = i; | 
|  | } | 
|  |  | 
|  | static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | struct urb *urb; | 
|  | unsigned char *buf; | 
|  | unsigned int pipe; | 
|  | int err, size; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!data->isoc_rx_ep) | 
|  | return -ENODEV; | 
|  |  | 
|  | urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * | 
|  | BTUSB_MAX_ISOC_FRAMES; | 
|  |  | 
|  | buf = kmalloc(size, mem_flags); | 
|  | if (!buf) { | 
|  | usb_free_urb(urb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); | 
|  |  | 
|  | urb->dev      = data->udev; | 
|  | urb->pipe     = pipe; | 
|  | urb->context  = hdev; | 
|  | urb->complete = btusb_isoc_complete; | 
|  | urb->interval = data->isoc_rx_ep->bInterval; | 
|  |  | 
|  | urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP; | 
|  | urb->transfer_buffer = buf; | 
|  | urb->transfer_buffer_length = size; | 
|  |  | 
|  | __fill_isoc_descriptor(urb, size, | 
|  | le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); | 
|  |  | 
|  | usb_anchor_urb(urb, &data->isoc_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, mem_flags); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p submission failed (%d)", | 
|  | hdev->name, urb, -err); | 
|  | usb_unanchor_urb(urb); | 
|  | } | 
|  |  | 
|  | usb_free_urb(urb); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void btusb_tx_complete(struct urb *urb) | 
|  | { | 
|  | struct sk_buff *skb = urb->context; | 
|  | struct hci_dev *hdev = (struct hci_dev *) skb->dev; | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  |  | 
|  | BT_DBG("%s urb %p status %d count %d", hdev->name, | 
|  | urb, urb->status, urb->actual_length); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | goto done; | 
|  |  | 
|  | if (!urb->status) | 
|  | hdev->stat.byte_tx += urb->transfer_buffer_length; | 
|  | else | 
|  | hdev->stat.err_tx++; | 
|  |  | 
|  | done: | 
|  | spin_lock(&data->txlock); | 
|  | data->tx_in_flight--; | 
|  | spin_unlock(&data->txlock); | 
|  |  | 
|  | kfree(urb->setup_packet); | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static void btusb_isoc_tx_complete(struct urb *urb) | 
|  | { | 
|  | struct sk_buff *skb = urb->context; | 
|  | struct hci_dev *hdev = (struct hci_dev *) skb->dev; | 
|  |  | 
|  | BT_DBG("%s urb %p status %d count %d", hdev->name, | 
|  | urb, urb->status, urb->actual_length); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | goto done; | 
|  |  | 
|  | if (!urb->status) | 
|  | hdev->stat.byte_tx += urb->transfer_buffer_length; | 
|  | else | 
|  | hdev->stat.err_tx++; | 
|  |  | 
|  | done: | 
|  | kfree(urb->setup_packet); | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static int btusb_open(struct hci_dev *hdev) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | err = usb_autopm_get_interface(data->intf); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | data->intf->needs_remote_wakeup = 1; | 
|  |  | 
|  | if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) | 
|  | goto done; | 
|  |  | 
|  | if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) | 
|  | goto done; | 
|  |  | 
|  | err = btusb_submit_intr_urb(hdev, GFP_KERNEL); | 
|  | if (err < 0) | 
|  | goto failed; | 
|  |  | 
|  | err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); | 
|  | if (err < 0) { | 
|  | usb_kill_anchored_urbs(&data->intr_anchor); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | set_bit(BTUSB_BULK_RUNNING, &data->flags); | 
|  | btusb_submit_bulk_urb(hdev, GFP_KERNEL); | 
|  |  | 
|  | done: | 
|  | usb_autopm_put_interface(data->intf); | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | clear_bit(BTUSB_INTR_RUNNING, &data->flags); | 
|  | clear_bit(HCI_RUNNING, &hdev->flags); | 
|  | usb_autopm_put_interface(data->intf); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void btusb_stop_traffic(struct btusb_data *data) | 
|  | { | 
|  | usb_kill_anchored_urbs(&data->intr_anchor); | 
|  | usb_kill_anchored_urbs(&data->bulk_anchor); | 
|  | usb_kill_anchored_urbs(&data->isoc_anchor); | 
|  | } | 
|  |  | 
|  | static int btusb_close(struct hci_dev *hdev) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) | 
|  | return 0; | 
|  |  | 
|  | cancel_work_sync(&data->work); | 
|  | cancel_work_sync(&data->waker); | 
|  |  | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | clear_bit(BTUSB_BULK_RUNNING, &data->flags); | 
|  | clear_bit(BTUSB_INTR_RUNNING, &data->flags); | 
|  |  | 
|  | btusb_stop_traffic(data); | 
|  | err = usb_autopm_get_interface(data->intf); | 
|  | if (err < 0) | 
|  | goto failed; | 
|  |  | 
|  | data->intf->needs_remote_wakeup = 0; | 
|  | usb_autopm_put_interface(data->intf); | 
|  |  | 
|  | failed: | 
|  | usb_scuttle_anchored_urbs(&data->deferred); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int btusb_flush(struct hci_dev *hdev) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | usb_kill_anchored_urbs(&data->tx_anchor); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int btusb_send_frame(struct sk_buff *skb) | 
|  | { | 
|  | struct hci_dev *hdev = (struct hci_dev *) skb->dev; | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | struct usb_ctrlrequest *dr; | 
|  | struct urb *urb; | 
|  | unsigned int pipe; | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | return -EBUSY; | 
|  |  | 
|  | switch (bt_cb(skb)->pkt_type) { | 
|  | case HCI_COMMAND_PKT: | 
|  | urb = usb_alloc_urb(0, GFP_ATOMIC); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dr = kmalloc(sizeof(*dr), GFP_ATOMIC); | 
|  | if (!dr) { | 
|  | usb_free_urb(urb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | dr->bRequestType = data->cmdreq_type; | 
|  | dr->bRequest     = 0; | 
|  | dr->wIndex       = 0; | 
|  | dr->wValue       = 0; | 
|  | dr->wLength      = __cpu_to_le16(skb->len); | 
|  |  | 
|  | pipe = usb_sndctrlpipe(data->udev, 0x00); | 
|  |  | 
|  | usb_fill_control_urb(urb, data->udev, pipe, (void *) dr, | 
|  | skb->data, skb->len, btusb_tx_complete, skb); | 
|  |  | 
|  | hdev->stat.cmd_tx++; | 
|  | break; | 
|  |  | 
|  | case HCI_ACLDATA_PKT: | 
|  | if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1) | 
|  | return -ENODEV; | 
|  |  | 
|  | urb = usb_alloc_urb(0, GFP_ATOMIC); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pipe = usb_sndbulkpipe(data->udev, | 
|  | data->bulk_tx_ep->bEndpointAddress); | 
|  |  | 
|  | usb_fill_bulk_urb(urb, data->udev, pipe, | 
|  | skb->data, skb->len, btusb_tx_complete, skb); | 
|  |  | 
|  | hdev->stat.acl_tx++; | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1) | 
|  | return -ENODEV; | 
|  |  | 
|  | urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC); | 
|  | if (!urb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pipe = usb_sndisocpipe(data->udev, | 
|  | data->isoc_tx_ep->bEndpointAddress); | 
|  |  | 
|  | urb->dev      = data->udev; | 
|  | urb->pipe     = pipe; | 
|  | urb->context  = skb; | 
|  | urb->complete = btusb_isoc_tx_complete; | 
|  | urb->interval = data->isoc_tx_ep->bInterval; | 
|  |  | 
|  | urb->transfer_flags  = URB_ISO_ASAP; | 
|  | urb->transfer_buffer = skb->data; | 
|  | urb->transfer_buffer_length = skb->len; | 
|  |  | 
|  | __fill_isoc_descriptor(urb, skb->len, | 
|  | le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); | 
|  |  | 
|  | hdev->stat.sco_tx++; | 
|  | goto skip_waking; | 
|  |  | 
|  | default: | 
|  | return -EILSEQ; | 
|  | } | 
|  |  | 
|  | err = inc_tx(data); | 
|  | if (err) { | 
|  | usb_anchor_urb(urb, &data->deferred); | 
|  | schedule_work(&data->waker); | 
|  | err = 0; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | skip_waking: | 
|  | usb_anchor_urb(urb, &data->tx_anchor); | 
|  |  | 
|  | err = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s urb %p submission failed", hdev->name, urb); | 
|  | kfree(urb->setup_packet); | 
|  | usb_unanchor_urb(urb); | 
|  | } else { | 
|  | usb_mark_last_busy(data->udev); | 
|  | } | 
|  |  | 
|  | usb_free_urb(urb); | 
|  |  | 
|  | done: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void btusb_destruct(struct hci_dev *hdev) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | kfree(data); | 
|  | } | 
|  |  | 
|  | static void btusb_notify(struct hci_dev *hdev, unsigned int evt) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  |  | 
|  | BT_DBG("%s evt %d", hdev->name, evt); | 
|  |  | 
|  | if (hdev->conn_hash.sco_num != data->sco_num) { | 
|  | data->sco_num = hdev->conn_hash.sco_num; | 
|  | schedule_work(&data->work); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting) | 
|  | { | 
|  | struct btusb_data *data = hdev->driver_data; | 
|  | struct usb_interface *intf = data->isoc; | 
|  | struct usb_endpoint_descriptor *ep_desc; | 
|  | int i, err; | 
|  |  | 
|  | if (!data->isoc) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = usb_set_interface(data->udev, 1, altsetting); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s setting interface failed (%d)", hdev->name, -err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | data->isoc_altsetting = altsetting; | 
|  |  | 
|  | data->isoc_tx_ep = NULL; | 
|  | data->isoc_rx_ep = NULL; | 
|  |  | 
|  | for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { | 
|  | ep_desc = &intf->cur_altsetting->endpoint[i].desc; | 
|  |  | 
|  | if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { | 
|  | data->isoc_tx_ep = ep_desc; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { | 
|  | data->isoc_rx_ep = ep_desc; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!data->isoc_tx_ep || !data->isoc_rx_ep) { | 
|  | BT_ERR("%s invalid SCO descriptors", hdev->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void btusb_work(struct work_struct *work) | 
|  | { | 
|  | struct btusb_data *data = container_of(work, struct btusb_data, work); | 
|  | struct hci_dev *hdev = data->hdev; | 
|  | int err; | 
|  |  | 
|  | if (hdev->conn_hash.sco_num > 0) { | 
|  | if (!data->did_iso_resume) { | 
|  | err = usb_autopm_get_interface(data->isoc); | 
|  | if (err < 0) { | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | usb_kill_anchored_urbs(&data->isoc_anchor); | 
|  | return; | 
|  | } | 
|  |  | 
|  | data->did_iso_resume = 1; | 
|  | } | 
|  | if (data->isoc_altsetting != 2) { | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | usb_kill_anchored_urbs(&data->isoc_anchor); | 
|  |  | 
|  | if (__set_isoc_interface(hdev, 2) < 0) | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { | 
|  | if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | else | 
|  | btusb_submit_isoc_urb(hdev, GFP_KERNEL); | 
|  | } | 
|  | } else { | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | usb_kill_anchored_urbs(&data->isoc_anchor); | 
|  |  | 
|  | __set_isoc_interface(hdev, 0); | 
|  | if (data->did_iso_resume) { | 
|  | data->did_iso_resume = 0; | 
|  | usb_autopm_put_interface(data->isoc); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void btusb_waker(struct work_struct *work) | 
|  | { | 
|  | struct btusb_data *data = container_of(work, struct btusb_data, waker); | 
|  | int err; | 
|  |  | 
|  | err = usb_autopm_get_interface(data->intf); | 
|  | if (err < 0) | 
|  | return; | 
|  |  | 
|  | usb_autopm_put_interface(data->intf); | 
|  | } | 
|  |  | 
|  | static int btusb_probe(struct usb_interface *intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_endpoint_descriptor *ep_desc; | 
|  | struct btusb_data *data; | 
|  | struct hci_dev *hdev; | 
|  | int i, err; | 
|  |  | 
|  | BT_DBG("intf %p id %p", intf, id); | 
|  |  | 
|  | /* interface numbers are hardcoded in the spec */ | 
|  | if (intf->cur_altsetting->desc.bInterfaceNumber != 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!id->driver_info) { | 
|  | const struct usb_device_id *match; | 
|  | match = usb_match_id(intf, blacklist_table); | 
|  | if (match) | 
|  | id = match; | 
|  | } | 
|  |  | 
|  | if (id->driver_info == BTUSB_IGNORE) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (ignore_csr && id->driver_info & BTUSB_CSR) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER) | 
|  | return -ENODEV; | 
|  |  | 
|  | data = kzalloc(sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { | 
|  | ep_desc = &intf->cur_altsetting->endpoint[i].desc; | 
|  |  | 
|  | if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { | 
|  | data->intr_ep = ep_desc; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { | 
|  | data->bulk_tx_ep = ep_desc; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { | 
|  | data->bulk_rx_ep = ep_desc; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) { | 
|  | kfree(data); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | data->cmdreq_type = USB_TYPE_CLASS; | 
|  |  | 
|  | data->udev = interface_to_usbdev(intf); | 
|  | data->intf = intf; | 
|  |  | 
|  | spin_lock_init(&data->lock); | 
|  |  | 
|  | INIT_WORK(&data->work, btusb_work); | 
|  | INIT_WORK(&data->waker, btusb_waker); | 
|  | spin_lock_init(&data->txlock); | 
|  |  | 
|  | init_usb_anchor(&data->tx_anchor); | 
|  | init_usb_anchor(&data->intr_anchor); | 
|  | init_usb_anchor(&data->bulk_anchor); | 
|  | init_usb_anchor(&data->isoc_anchor); | 
|  | init_usb_anchor(&data->deferred); | 
|  |  | 
|  | hdev = hci_alloc_dev(); | 
|  | if (!hdev) { | 
|  | kfree(data); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | hdev->bus = HCI_USB; | 
|  | hdev->driver_data = data; | 
|  |  | 
|  | data->hdev = hdev; | 
|  |  | 
|  | SET_HCIDEV_DEV(hdev, &intf->dev); | 
|  |  | 
|  | hdev->open     = btusb_open; | 
|  | hdev->close    = btusb_close; | 
|  | hdev->flush    = btusb_flush; | 
|  | hdev->send     = btusb_send_frame; | 
|  | hdev->destruct = btusb_destruct; | 
|  | hdev->notify   = btusb_notify; | 
|  |  | 
|  | hdev->owner = THIS_MODULE; | 
|  |  | 
|  | /* Interface numbers are hardcoded in the specification */ | 
|  | data->isoc = usb_ifnum_to_if(data->udev, 1); | 
|  |  | 
|  | if (!reset) | 
|  | set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | 
|  |  | 
|  | if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { | 
|  | if (!disable_scofix) | 
|  | set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); | 
|  | } | 
|  |  | 
|  | if (id->driver_info & BTUSB_BROKEN_ISOC) | 
|  | data->isoc = NULL; | 
|  |  | 
|  | if (id->driver_info & BTUSB_DIGIANSWER) { | 
|  | data->cmdreq_type = USB_TYPE_VENDOR; | 
|  | set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | 
|  | } | 
|  |  | 
|  | if (id->driver_info & BTUSB_CSR) { | 
|  | struct usb_device *udev = data->udev; | 
|  |  | 
|  | /* Old firmware would otherwise execute USB reset */ | 
|  | if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117) | 
|  | set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); | 
|  | } | 
|  |  | 
|  | if (id->driver_info & BTUSB_SNIFFER) { | 
|  | struct usb_device *udev = data->udev; | 
|  |  | 
|  | /* New sniffer firmware has crippled HCI interface */ | 
|  | if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) | 
|  | set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); | 
|  |  | 
|  | data->isoc = NULL; | 
|  | } | 
|  |  | 
|  | if (id->driver_info & BTUSB_BCM92035) { | 
|  | unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 }; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); | 
|  | if (skb) { | 
|  | memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); | 
|  | skb_queue_tail(&hdev->driver_init, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (data->isoc) { | 
|  | err = usb_driver_claim_interface(&btusb_driver, | 
|  | data->isoc, data); | 
|  | if (err < 0) { | 
|  | hci_free_dev(hdev); | 
|  | kfree(data); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | err = hci_register_dev(hdev); | 
|  | if (err < 0) { | 
|  | hci_free_dev(hdev); | 
|  | kfree(data); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | usb_set_intfdata(intf, data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void btusb_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct btusb_data *data = usb_get_intfdata(intf); | 
|  | struct hci_dev *hdev; | 
|  |  | 
|  | BT_DBG("intf %p", intf); | 
|  |  | 
|  | if (!data) | 
|  | return; | 
|  |  | 
|  | hdev = data->hdev; | 
|  |  | 
|  | __hci_dev_hold(hdev); | 
|  |  | 
|  | usb_set_intfdata(data->intf, NULL); | 
|  |  | 
|  | if (data->isoc) | 
|  | usb_set_intfdata(data->isoc, NULL); | 
|  |  | 
|  | hci_unregister_dev(hdev); | 
|  |  | 
|  | if (intf == data->isoc) | 
|  | usb_driver_release_interface(&btusb_driver, data->intf); | 
|  | else if (data->isoc) | 
|  | usb_driver_release_interface(&btusb_driver, data->isoc); | 
|  |  | 
|  | __hci_dev_put(hdev); | 
|  |  | 
|  | hci_free_dev(hdev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int btusb_suspend(struct usb_interface *intf, pm_message_t message) | 
|  | { | 
|  | struct btusb_data *data = usb_get_intfdata(intf); | 
|  |  | 
|  | BT_DBG("intf %p", intf); | 
|  |  | 
|  | if (data->suspend_count++) | 
|  | return 0; | 
|  |  | 
|  | spin_lock_irq(&data->txlock); | 
|  | if (!((message.event & PM_EVENT_AUTO) && data->tx_in_flight)) { | 
|  | set_bit(BTUSB_SUSPENDING, &data->flags); | 
|  | spin_unlock_irq(&data->txlock); | 
|  | } else { | 
|  | spin_unlock_irq(&data->txlock); | 
|  | data->suspend_count--; | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | cancel_work_sync(&data->work); | 
|  |  | 
|  | btusb_stop_traffic(data); | 
|  | usb_kill_anchored_urbs(&data->tx_anchor); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void play_deferred(struct btusb_data *data) | 
|  | { | 
|  | struct urb *urb; | 
|  | int err; | 
|  |  | 
|  | while ((urb = usb_get_from_anchor(&data->deferred))) { | 
|  | err = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (err < 0) | 
|  | break; | 
|  |  | 
|  | data->tx_in_flight++; | 
|  | } | 
|  | usb_scuttle_anchored_urbs(&data->deferred); | 
|  | } | 
|  |  | 
|  | static int btusb_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct btusb_data *data = usb_get_intfdata(intf); | 
|  | struct hci_dev *hdev = data->hdev; | 
|  | int err = 0; | 
|  |  | 
|  | BT_DBG("intf %p", intf); | 
|  |  | 
|  | if (--data->suspend_count) | 
|  | return 0; | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | goto done; | 
|  |  | 
|  | if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { | 
|  | err = btusb_submit_intr_urb(hdev, GFP_NOIO); | 
|  | if (err < 0) { | 
|  | clear_bit(BTUSB_INTR_RUNNING, &data->flags); | 
|  | goto failed; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { | 
|  | err = btusb_submit_bulk_urb(hdev, GFP_NOIO); | 
|  | if (err < 0) { | 
|  | clear_bit(BTUSB_BULK_RUNNING, &data->flags); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | btusb_submit_bulk_urb(hdev, GFP_NOIO); | 
|  | } | 
|  |  | 
|  | if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { | 
|  | if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) | 
|  | clear_bit(BTUSB_ISOC_RUNNING, &data->flags); | 
|  | else | 
|  | btusb_submit_isoc_urb(hdev, GFP_NOIO); | 
|  | } | 
|  |  | 
|  | spin_lock_irq(&data->txlock); | 
|  | play_deferred(data); | 
|  | clear_bit(BTUSB_SUSPENDING, &data->flags); | 
|  | spin_unlock_irq(&data->txlock); | 
|  | schedule_work(&data->work); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | usb_scuttle_anchored_urbs(&data->deferred); | 
|  | done: | 
|  | spin_lock_irq(&data->txlock); | 
|  | clear_bit(BTUSB_SUSPENDING, &data->flags); | 
|  | spin_unlock_irq(&data->txlock); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static struct usb_driver btusb_driver = { | 
|  | .name		= "btusb", | 
|  | .probe		= btusb_probe, | 
|  | .disconnect	= btusb_disconnect, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend	= btusb_suspend, | 
|  | .resume		= btusb_resume, | 
|  | #endif | 
|  | .id_table	= btusb_table, | 
|  | .supports_autosuspend = 1, | 
|  | }; | 
|  |  | 
|  | static int __init btusb_init(void) | 
|  | { | 
|  | BT_INFO("Generic Bluetooth USB driver ver %s", VERSION); | 
|  |  | 
|  | return usb_register(&btusb_driver); | 
|  | } | 
|  |  | 
|  | static void __exit btusb_exit(void) | 
|  | { | 
|  | usb_deregister(&btusb_driver); | 
|  | } | 
|  |  | 
|  | module_init(btusb_init); | 
|  | module_exit(btusb_exit); | 
|  |  | 
|  | module_param(ignore_dga, bool, 0644); | 
|  | MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001"); | 
|  |  | 
|  | module_param(ignore_csr, bool, 0644); | 
|  | MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001"); | 
|  |  | 
|  | module_param(ignore_sniffer, bool, 0644); | 
|  | MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002"); | 
|  |  | 
|  | module_param(disable_scofix, bool, 0644); | 
|  | MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); | 
|  |  | 
|  | module_param(force_scofix, bool, 0644); | 
|  | MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); | 
|  |  | 
|  | module_param(reset, bool, 0644); | 
|  | MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); | 
|  |  | 
|  | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | 
|  | MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); | 
|  | MODULE_VERSION(VERSION); | 
|  | MODULE_LICENSE("GPL"); |