|  | /* | 
|  | *  Texas Instruments' Bluetooth HCILL UART protocol | 
|  | * | 
|  | *  HCILL (HCI Low Level) is a Texas Instruments' power management | 
|  | *  protocol extension to H4. | 
|  | * | 
|  | *  Copyright (C) 2007 Texas Instruments, Inc. | 
|  | * | 
|  | *  Written by Ohad Ben-Cohen <ohad@bencohen.org> | 
|  | * | 
|  | *  Acknowledgements: | 
|  | *  This file is based on hci_h4.c, which was written | 
|  | *  by Maxim Krasnyansky and Marcel Holtmann. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 | 
|  | *  as published by the Free Software Foundation | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/poll.h> | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/ioctl.h> | 
|  | #include <linux/skbuff.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  | #include "hci_uart.h" | 
|  |  | 
|  | /* HCILL commands */ | 
|  | #define HCILL_GO_TO_SLEEP_IND	0x30 | 
|  | #define HCILL_GO_TO_SLEEP_ACK	0x31 | 
|  | #define HCILL_WAKE_UP_IND	0x32 | 
|  | #define HCILL_WAKE_UP_ACK	0x33 | 
|  |  | 
|  | /* HCILL receiver States */ | 
|  | #define HCILL_W4_PACKET_TYPE	0 | 
|  | #define HCILL_W4_EVENT_HDR	1 | 
|  | #define HCILL_W4_ACL_HDR	2 | 
|  | #define HCILL_W4_SCO_HDR	3 | 
|  | #define HCILL_W4_DATA		4 | 
|  |  | 
|  | /* HCILL states */ | 
|  | enum hcill_states_e { | 
|  | HCILL_ASLEEP, | 
|  | HCILL_ASLEEP_TO_AWAKE, | 
|  | HCILL_AWAKE, | 
|  | HCILL_AWAKE_TO_ASLEEP | 
|  | }; | 
|  |  | 
|  | struct hcill_cmd { | 
|  | u8 cmd; | 
|  | } __attribute__((packed)); | 
|  |  | 
|  | struct ll_struct { | 
|  | unsigned long rx_state; | 
|  | unsigned long rx_count; | 
|  | struct sk_buff *rx_skb; | 
|  | struct sk_buff_head txq; | 
|  | spinlock_t hcill_lock;		/* HCILL state lock	*/ | 
|  | unsigned long hcill_state;	/* HCILL power state	*/ | 
|  | struct sk_buff_head tx_wait_q;	/* HCILL wait queue	*/ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Builds and sends an HCILL command packet. | 
|  | * These are very simple packets with only 1 cmd byte | 
|  | */ | 
|  | static int send_hcill_cmd(u8 cmd, struct hci_uart *hu) | 
|  | { | 
|  | int err = 0; | 
|  | struct sk_buff *skb = NULL; | 
|  | struct ll_struct *ll = hu->priv; | 
|  | struct hcill_cmd *hcill_packet; | 
|  |  | 
|  | BT_DBG("hu %p cmd 0x%x", hu, cmd); | 
|  |  | 
|  | /* allocate packet */ | 
|  | skb = bt_skb_alloc(1, GFP_ATOMIC); | 
|  | if (!skb) { | 
|  | BT_ERR("cannot allocate memory for HCILL packet"); | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* prepare packet */ | 
|  | hcill_packet = (struct hcill_cmd *) skb_put(skb, 1); | 
|  | hcill_packet->cmd = cmd; | 
|  | skb->dev = (void *) hu->hdev; | 
|  |  | 
|  | /* send packet */ | 
|  | skb_queue_tail(&ll->txq, skb); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* Initialize protocol */ | 
|  | static int ll_open(struct hci_uart *hu) | 
|  | { | 
|  | struct ll_struct *ll; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | ll = kzalloc(sizeof(*ll), GFP_ATOMIC); | 
|  | if (!ll) | 
|  | return -ENOMEM; | 
|  |  | 
|  | skb_queue_head_init(&ll->txq); | 
|  | skb_queue_head_init(&ll->tx_wait_q); | 
|  | spin_lock_init(&ll->hcill_lock); | 
|  |  | 
|  | ll->hcill_state = HCILL_AWAKE; | 
|  |  | 
|  | hu->priv = ll; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Flush protocol data */ | 
|  | static int ll_flush(struct hci_uart *hu) | 
|  | { | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | skb_queue_purge(&ll->tx_wait_q); | 
|  | skb_queue_purge(&ll->txq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Close protocol */ | 
|  | static int ll_close(struct hci_uart *hu) | 
|  | { | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | skb_queue_purge(&ll->tx_wait_q); | 
|  | skb_queue_purge(&ll->txq); | 
|  |  | 
|  | kfree_skb(ll->rx_skb); | 
|  |  | 
|  | hu->priv = NULL; | 
|  |  | 
|  | kfree(ll); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * internal function, which does common work of the device wake up process: | 
|  | * 1. places all pending packets (waiting in tx_wait_q list) in txq list. | 
|  | * 2. changes internal state to HCILL_AWAKE. | 
|  | * Note: assumes that hcill_lock spinlock is taken, | 
|  | * shouldn't be called otherwise! | 
|  | */ | 
|  | static void __ll_do_awake(struct ll_struct *ll) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  |  | 
|  | while ((skb = skb_dequeue(&ll->tx_wait_q))) | 
|  | skb_queue_tail(&ll->txq, skb); | 
|  |  | 
|  | ll->hcill_state = HCILL_AWAKE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called upon a wake-up-indication from the device | 
|  | */ | 
|  | static void ll_device_want_to_wakeup(struct hci_uart *hu) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | /* lock hcill state */ | 
|  | spin_lock_irqsave(&ll->hcill_lock, flags); | 
|  |  | 
|  | switch (ll->hcill_state) { | 
|  | case HCILL_ASLEEP_TO_AWAKE: | 
|  | /* | 
|  | * This state means that both the host and the BRF chip | 
|  | * have simultaneously sent a wake-up-indication packet. | 
|  | * Traditionaly, in this case, receiving a wake-up-indication | 
|  | * was enough and an additional wake-up-ack wasn't needed. | 
|  | * This has changed with the BRF6350, which does require an | 
|  | * explicit wake-up-ack. Other BRF versions, which do not | 
|  | * require an explicit ack here, do accept it, thus it is | 
|  | * perfectly safe to always send one. | 
|  | */ | 
|  | BT_DBG("dual wake-up-indication"); | 
|  | /* deliberate fall-through - do not add break */ | 
|  | case HCILL_ASLEEP: | 
|  | /* acknowledge device wake up */ | 
|  | if (send_hcill_cmd(HCILL_WAKE_UP_ACK, hu) < 0) { | 
|  | BT_ERR("cannot acknowledge device wake up"); | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | /* any other state is illegal */ | 
|  | BT_ERR("received HCILL_WAKE_UP_IND in state %ld", ll->hcill_state); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* send pending packets and change state to HCILL_AWAKE */ | 
|  | __ll_do_awake(ll); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* actually send the packets */ | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called upon a sleep-indication from the device | 
|  | */ | 
|  | static void ll_device_want_to_sleep(struct hci_uart *hu) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | /* lock hcill state */ | 
|  | spin_lock_irqsave(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* sanity check */ | 
|  | if (ll->hcill_state != HCILL_AWAKE) | 
|  | BT_ERR("ERR: HCILL_GO_TO_SLEEP_IND in state %ld", ll->hcill_state); | 
|  |  | 
|  | /* acknowledge device sleep */ | 
|  | if (send_hcill_cmd(HCILL_GO_TO_SLEEP_ACK, hu) < 0) { | 
|  | BT_ERR("cannot acknowledge device sleep"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* update state */ | 
|  | ll->hcill_state = HCILL_ASLEEP; | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* actually send the sleep ack packet */ | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called upon wake-up-acknowledgement from the device | 
|  | */ | 
|  | static void ll_device_woke_up(struct hci_uart *hu) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | /* lock hcill state */ | 
|  | spin_lock_irqsave(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* sanity check */ | 
|  | if (ll->hcill_state != HCILL_ASLEEP_TO_AWAKE) | 
|  | BT_ERR("received HCILL_WAKE_UP_ACK in state %ld", ll->hcill_state); | 
|  |  | 
|  | /* send pending packets and change state to HCILL_AWAKE */ | 
|  | __ll_do_awake(ll); | 
|  |  | 
|  | spin_unlock_irqrestore(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* actually send the packets */ | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | /* Enqueue frame for transmittion (padding, crc, etc) */ | 
|  | /* may be called from two simultaneous tasklets */ | 
|  | static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct ll_struct *ll = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p skb %p", hu, skb); | 
|  |  | 
|  | /* Prepend skb with frame type */ | 
|  | memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | 
|  |  | 
|  | /* lock hcill state */ | 
|  | spin_lock_irqsave(&ll->hcill_lock, flags); | 
|  |  | 
|  | /* act according to current state */ | 
|  | switch (ll->hcill_state) { | 
|  | case HCILL_AWAKE: | 
|  | BT_DBG("device awake, sending normally"); | 
|  | skb_queue_tail(&ll->txq, skb); | 
|  | break; | 
|  | case HCILL_ASLEEP: | 
|  | BT_DBG("device asleep, waking up and queueing packet"); | 
|  | /* save packet for later */ | 
|  | skb_queue_tail(&ll->tx_wait_q, skb); | 
|  | /* awake device */ | 
|  | if (send_hcill_cmd(HCILL_WAKE_UP_IND, hu) < 0) { | 
|  | BT_ERR("cannot wake up device"); | 
|  | break; | 
|  | } | 
|  | ll->hcill_state = HCILL_ASLEEP_TO_AWAKE; | 
|  | break; | 
|  | case HCILL_ASLEEP_TO_AWAKE: | 
|  | BT_DBG("device waking up, queueing packet"); | 
|  | /* transient state; just keep packet for later */ | 
|  | skb_queue_tail(&ll->tx_wait_q, skb); | 
|  | break; | 
|  | default: | 
|  | BT_ERR("illegal hcill state: %ld (losing packet)", ll->hcill_state); | 
|  | kfree_skb(skb); | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&ll->hcill_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int ll_check_data_len(struct ll_struct *ll, int len) | 
|  | { | 
|  | register int room = skb_tailroom(ll->rx_skb); | 
|  |  | 
|  | BT_DBG("len %d room %d", len, room); | 
|  |  | 
|  | if (!len) { | 
|  | hci_recv_frame(ll->rx_skb); | 
|  | } else if (len > room) { | 
|  | BT_ERR("Data length is too large"); | 
|  | kfree_skb(ll->rx_skb); | 
|  | } else { | 
|  | ll->rx_state = HCILL_W4_DATA; | 
|  | ll->rx_count = len; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | ll->rx_state = HCILL_W4_PACKET_TYPE; | 
|  | ll->rx_skb   = NULL; | 
|  | ll->rx_count = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Recv data */ | 
|  | static int ll_recv(struct hci_uart *hu, void *data, int count) | 
|  | { | 
|  | struct ll_struct *ll = hu->priv; | 
|  | register char *ptr; | 
|  | struct hci_event_hdr *eh; | 
|  | struct hci_acl_hdr   *ah; | 
|  | struct hci_sco_hdr   *sh; | 
|  | register int len, type, dlen; | 
|  |  | 
|  | BT_DBG("hu %p count %d rx_state %ld rx_count %ld", hu, count, ll->rx_state, ll->rx_count); | 
|  |  | 
|  | ptr = data; | 
|  | while (count) { | 
|  | if (ll->rx_count) { | 
|  | len = min_t(unsigned int, ll->rx_count, count); | 
|  | memcpy(skb_put(ll->rx_skb, len), ptr, len); | 
|  | ll->rx_count -= len; count -= len; ptr += len; | 
|  |  | 
|  | if (ll->rx_count) | 
|  | continue; | 
|  |  | 
|  | switch (ll->rx_state) { | 
|  | case HCILL_W4_DATA: | 
|  | BT_DBG("Complete data"); | 
|  | hci_recv_frame(ll->rx_skb); | 
|  |  | 
|  | ll->rx_state = HCILL_W4_PACKET_TYPE; | 
|  | ll->rx_skb = NULL; | 
|  | continue; | 
|  |  | 
|  | case HCILL_W4_EVENT_HDR: | 
|  | eh = hci_event_hdr(ll->rx_skb); | 
|  |  | 
|  | BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen); | 
|  |  | 
|  | ll_check_data_len(ll, eh->plen); | 
|  | continue; | 
|  |  | 
|  | case HCILL_W4_ACL_HDR: | 
|  | ah = hci_acl_hdr(ll->rx_skb); | 
|  | dlen = __le16_to_cpu(ah->dlen); | 
|  |  | 
|  | BT_DBG("ACL header: dlen %d", dlen); | 
|  |  | 
|  | ll_check_data_len(ll, dlen); | 
|  | continue; | 
|  |  | 
|  | case HCILL_W4_SCO_HDR: | 
|  | sh = hci_sco_hdr(ll->rx_skb); | 
|  |  | 
|  | BT_DBG("SCO header: dlen %d", sh->dlen); | 
|  |  | 
|  | ll_check_data_len(ll, sh->dlen); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* HCILL_W4_PACKET_TYPE */ | 
|  | switch (*ptr) { | 
|  | case HCI_EVENT_PKT: | 
|  | BT_DBG("Event packet"); | 
|  | ll->rx_state = HCILL_W4_EVENT_HDR; | 
|  | ll->rx_count = HCI_EVENT_HDR_SIZE; | 
|  | type = HCI_EVENT_PKT; | 
|  | break; | 
|  |  | 
|  | case HCI_ACLDATA_PKT: | 
|  | BT_DBG("ACL packet"); | 
|  | ll->rx_state = HCILL_W4_ACL_HDR; | 
|  | ll->rx_count = HCI_ACL_HDR_SIZE; | 
|  | type = HCI_ACLDATA_PKT; | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | BT_DBG("SCO packet"); | 
|  | ll->rx_state = HCILL_W4_SCO_HDR; | 
|  | ll->rx_count = HCI_SCO_HDR_SIZE; | 
|  | type = HCI_SCODATA_PKT; | 
|  | break; | 
|  |  | 
|  | /* HCILL signals */ | 
|  | case HCILL_GO_TO_SLEEP_IND: | 
|  | BT_DBG("HCILL_GO_TO_SLEEP_IND packet"); | 
|  | ll_device_want_to_sleep(hu); | 
|  | ptr++; count--; | 
|  | continue; | 
|  |  | 
|  | case HCILL_GO_TO_SLEEP_ACK: | 
|  | /* shouldn't happen */ | 
|  | BT_ERR("received HCILL_GO_TO_SLEEP_ACK (in state %ld)", ll->hcill_state); | 
|  | ptr++; count--; | 
|  | continue; | 
|  |  | 
|  | case HCILL_WAKE_UP_IND: | 
|  | BT_DBG("HCILL_WAKE_UP_IND packet"); | 
|  | ll_device_want_to_wakeup(hu); | 
|  | ptr++; count--; | 
|  | continue; | 
|  |  | 
|  | case HCILL_WAKE_UP_ACK: | 
|  | BT_DBG("HCILL_WAKE_UP_ACK packet"); | 
|  | ll_device_woke_up(hu); | 
|  | ptr++; count--; | 
|  | continue; | 
|  |  | 
|  | default: | 
|  | BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr); | 
|  | hu->hdev->stat.err_rx++; | 
|  | ptr++; count--; | 
|  | continue; | 
|  | }; | 
|  |  | 
|  | ptr++; count--; | 
|  |  | 
|  | /* Allocate packet */ | 
|  | ll->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); | 
|  | if (!ll->rx_skb) { | 
|  | BT_ERR("Can't allocate mem for new packet"); | 
|  | ll->rx_state = HCILL_W4_PACKET_TYPE; | 
|  | ll->rx_count = 0; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ll->rx_skb->dev = (void *) hu->hdev; | 
|  | bt_cb(ll->rx_skb)->pkt_type = type; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *ll_dequeue(struct hci_uart *hu) | 
|  | { | 
|  | struct ll_struct *ll = hu->priv; | 
|  | return skb_dequeue(&ll->txq); | 
|  | } | 
|  |  | 
|  | static struct hci_uart_proto llp = { | 
|  | .id		= HCI_UART_LL, | 
|  | .open		= ll_open, | 
|  | .close		= ll_close, | 
|  | .recv		= ll_recv, | 
|  | .enqueue	= ll_enqueue, | 
|  | .dequeue	= ll_dequeue, | 
|  | .flush		= ll_flush, | 
|  | }; | 
|  |  | 
|  | int ll_init(void) | 
|  | { | 
|  | int err = hci_uart_register_proto(&llp); | 
|  |  | 
|  | if (!err) | 
|  | BT_INFO("HCILL protocol initialized"); | 
|  | else | 
|  | BT_ERR("HCILL protocol registration failed"); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ll_deinit(void) | 
|  | { | 
|  | return hci_uart_unregister_proto(&llp); | 
|  | } |