|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "iwl-eeprom.h" | 
|  | #include "iwl-dev.h" | 
|  | #include "iwl-core.h" | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-sta.h" | 
|  | #include "iwl-agn.h" | 
|  | #include "iwl-helpers.h" | 
|  | #include "iwl-agn-hw.h" | 
|  | #include "iwl-6000-hw.h" | 
|  | #include "iwl-agn-led.h" | 
|  | #include "iwl-agn-debugfs.h" | 
|  |  | 
|  | /* Highest firmware API version supported */ | 
|  | #define IWL6000_UCODE_API_MAX 4 | 
|  | #define IWL6050_UCODE_API_MAX 4 | 
|  | #define IWL6000G2_UCODE_API_MAX 4 | 
|  |  | 
|  | /* Lowest firmware API version supported */ | 
|  | #define IWL6000_UCODE_API_MIN 4 | 
|  | #define IWL6050_UCODE_API_MIN 4 | 
|  | #define IWL6000G2_UCODE_API_MIN 4 | 
|  |  | 
|  | #define IWL6000_FW_PRE "iwlwifi-6000-" | 
|  | #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode" | 
|  | #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api) | 
|  |  | 
|  | #define IWL6050_FW_PRE "iwlwifi-6050-" | 
|  | #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode" | 
|  | #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api) | 
|  |  | 
|  | #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-" | 
|  | #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode" | 
|  | #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api) | 
|  |  | 
|  |  | 
|  | static void iwl6000_set_ct_threshold(struct iwl_priv *priv) | 
|  | { | 
|  | /* want Celsius */ | 
|  | priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; | 
|  | priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; | 
|  | } | 
|  |  | 
|  | /* Indicate calibration version to uCode. */ | 
|  | static void iwl6050_set_calib_version(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6) | 
|  | iwl_set_bit(priv, CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); | 
|  | } | 
|  |  | 
|  | /* NIC configuration for 6000 series */ | 
|  | static void iwl6000_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | u16 radio_cfg; | 
|  |  | 
|  | radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); | 
|  |  | 
|  | /* write radio config values to register */ | 
|  | if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) | 
|  | iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, | 
|  | EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | | 
|  | EEPROM_RF_CFG_STEP_MSK(radio_cfg) | | 
|  | EEPROM_RF_CFG_DASH_MSK(radio_cfg)); | 
|  |  | 
|  | /* set CSR_HW_CONFIG_REG for uCode use */ | 
|  | iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, | 
|  | CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | | 
|  | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); | 
|  |  | 
|  | /* no locking required for register write */ | 
|  | if (priv->cfg->pa_type == IWL_PA_INTERNAL) { | 
|  | /* 2x2 IPA phy type */ | 
|  | iwl_write32(priv, CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); | 
|  | } | 
|  | /* else do nothing, uCode configured */ | 
|  | if (priv->cfg->ops->lib->temp_ops.set_calib_version) | 
|  | priv->cfg->ops->lib->temp_ops.set_calib_version(priv); | 
|  | } | 
|  |  | 
|  | static struct iwl_sensitivity_ranges iwl6000_sensitivity = { | 
|  | .min_nrg_cck = 97, | 
|  | .max_nrg_cck = 0, /* not used, set to 0 */ | 
|  | .auto_corr_min_ofdm = 80, | 
|  | .auto_corr_min_ofdm_mrc = 128, | 
|  | .auto_corr_min_ofdm_x1 = 105, | 
|  | .auto_corr_min_ofdm_mrc_x1 = 192, | 
|  |  | 
|  | .auto_corr_max_ofdm = 145, | 
|  | .auto_corr_max_ofdm_mrc = 232, | 
|  | .auto_corr_max_ofdm_x1 = 110, | 
|  | .auto_corr_max_ofdm_mrc_x1 = 232, | 
|  |  | 
|  | .auto_corr_min_cck = 125, | 
|  | .auto_corr_max_cck = 175, | 
|  | .auto_corr_min_cck_mrc = 160, | 
|  | .auto_corr_max_cck_mrc = 310, | 
|  | .nrg_th_cck = 97, | 
|  | .nrg_th_ofdm = 100, | 
|  |  | 
|  | .barker_corr_th_min = 190, | 
|  | .barker_corr_th_min_mrc = 390, | 
|  | .nrg_th_cca = 62, | 
|  | }; | 
|  |  | 
|  | static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && | 
|  | priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES) | 
|  | priv->cfg->num_of_queues = | 
|  | priv->cfg->mod_params->num_of_queues; | 
|  |  | 
|  | priv->hw_params.max_txq_num = priv->cfg->num_of_queues; | 
|  | priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; | 
|  | priv->hw_params.scd_bc_tbls_size = | 
|  | priv->cfg->num_of_queues * | 
|  | sizeof(struct iwlagn_scd_bc_tbl); | 
|  | priv->hw_params.tfd_size = sizeof(struct iwl_tfd); | 
|  | priv->hw_params.max_stations = IWL5000_STATION_COUNT; | 
|  | priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; | 
|  |  | 
|  | priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; | 
|  | priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; | 
|  |  | 
|  | priv->hw_params.max_bsm_size = 0; | 
|  | priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) | | 
|  | BIT(IEEE80211_BAND_5GHZ); | 
|  | priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; | 
|  |  | 
|  | priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); | 
|  | priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); | 
|  | priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; | 
|  | priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; | 
|  |  | 
|  | if (priv->cfg->ops->lib->temp_ops.set_ct_kill) | 
|  | priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); | 
|  |  | 
|  | /* Set initial sensitivity parameters */ | 
|  | /* Set initial calibration set */ | 
|  | priv->hw_params.sens = &iwl6000_sensitivity; | 
|  | priv->hw_params.calib_init_cfg = | 
|  | BIT(IWL_CALIB_XTAL)		| | 
|  | BIT(IWL_CALIB_LO)		| | 
|  | BIT(IWL_CALIB_TX_IQ)		| | 
|  | BIT(IWL_CALIB_BASE_BAND); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl6050_hw_set_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && | 
|  | priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES) | 
|  | priv->cfg->num_of_queues = | 
|  | priv->cfg->mod_params->num_of_queues; | 
|  |  | 
|  | priv->hw_params.max_txq_num = priv->cfg->num_of_queues; | 
|  | priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; | 
|  | priv->hw_params.scd_bc_tbls_size = | 
|  | priv->cfg->num_of_queues * | 
|  | sizeof(struct iwlagn_scd_bc_tbl); | 
|  | priv->hw_params.tfd_size = sizeof(struct iwl_tfd); | 
|  | priv->hw_params.max_stations = IWL5000_STATION_COUNT; | 
|  | priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; | 
|  |  | 
|  | priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; | 
|  | priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; | 
|  |  | 
|  | priv->hw_params.max_bsm_size = 0; | 
|  | priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) | | 
|  | BIT(IEEE80211_BAND_5GHZ); | 
|  | priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; | 
|  |  | 
|  | priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); | 
|  | priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); | 
|  | priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; | 
|  | priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; | 
|  |  | 
|  | if (priv->cfg->ops->lib->temp_ops.set_ct_kill) | 
|  | priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); | 
|  |  | 
|  | /* Set initial sensitivity parameters */ | 
|  | /* Set initial calibration set */ | 
|  | priv->hw_params.sens = &iwl6000_sensitivity; | 
|  | priv->hw_params.calib_init_cfg = | 
|  | BIT(IWL_CALIB_XTAL)		| | 
|  | BIT(IWL_CALIB_DC)		| | 
|  | BIT(IWL_CALIB_LO)		| | 
|  | BIT(IWL_CALIB_TX_IQ)		| | 
|  | BIT(IWL_CALIB_BASE_BAND); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel) | 
|  | { | 
|  | struct iwl6000_channel_switch_cmd cmd; | 
|  | const struct iwl_channel_info *ch_info; | 
|  | struct iwl_host_cmd hcmd = { | 
|  | .id = REPLY_CHANNEL_SWITCH, | 
|  | .len = sizeof(cmd), | 
|  | .flags = CMD_SIZE_HUGE, | 
|  | .data = &cmd, | 
|  | }; | 
|  |  | 
|  | IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", | 
|  | priv->active_rxon.channel, channel); | 
|  |  | 
|  | cmd.band = priv->band == IEEE80211_BAND_2GHZ; | 
|  | cmd.channel = cpu_to_le16(channel); | 
|  | cmd.rxon_flags = priv->staging_rxon.flags; | 
|  | cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; | 
|  | cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); | 
|  | ch_info = iwl_get_channel_info(priv, priv->band, channel); | 
|  | if (ch_info) | 
|  | cmd.expect_beacon = is_channel_radar(ch_info); | 
|  | else { | 
|  | IWL_ERR(priv, "invalid channel switch from %u to %u\n", | 
|  | priv->active_rxon.channel, channel); | 
|  | return -EFAULT; | 
|  | } | 
|  | priv->switch_rxon.channel = cpu_to_le16(channel); | 
|  | priv->switch_rxon.switch_in_progress = true; | 
|  |  | 
|  | return iwl_send_cmd_sync(priv, &hcmd); | 
|  | } | 
|  |  | 
|  | static struct iwl_lib_ops iwl6000_lib = { | 
|  | .set_hw_params = iwl6000_hw_set_hw_params, | 
|  | .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, | 
|  | .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, | 
|  | .txq_set_sched = iwlagn_txq_set_sched, | 
|  | .txq_agg_enable = iwlagn_txq_agg_enable, | 
|  | .txq_agg_disable = iwlagn_txq_agg_disable, | 
|  | .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd, | 
|  | .txq_free_tfd = iwl_hw_txq_free_tfd, | 
|  | .txq_init = iwl_hw_tx_queue_init, | 
|  | .rx_handler_setup = iwlagn_rx_handler_setup, | 
|  | .setup_deferred_work = iwlagn_setup_deferred_work, | 
|  | .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, | 
|  | .load_ucode = iwlagn_load_ucode, | 
|  | .dump_nic_event_log = iwl_dump_nic_event_log, | 
|  | .dump_nic_error_log = iwl_dump_nic_error_log, | 
|  | .dump_csr = iwl_dump_csr, | 
|  | .dump_fh = iwl_dump_fh, | 
|  | .init_alive_start = iwlagn_init_alive_start, | 
|  | .alive_notify = iwlagn_alive_notify, | 
|  | .send_tx_power = iwlagn_send_tx_power, | 
|  | .update_chain_flags = iwl_update_chain_flags, | 
|  | .set_channel_switch = iwl6000_hw_channel_switch, | 
|  | .apm_ops = { | 
|  | .init = iwl_apm_init, | 
|  | .stop = iwl_apm_stop, | 
|  | .config = iwl6000_nic_config, | 
|  | .set_pwr_src = iwl_set_pwr_src, | 
|  | }, | 
|  | .eeprom_ops = { | 
|  | .regulatory_bands = { | 
|  | EEPROM_REG_BAND_1_CHANNELS, | 
|  | EEPROM_REG_BAND_2_CHANNELS, | 
|  | EEPROM_REG_BAND_3_CHANNELS, | 
|  | EEPROM_REG_BAND_4_CHANNELS, | 
|  | EEPROM_REG_BAND_5_CHANNELS, | 
|  | EEPROM_6000_REG_BAND_24_HT40_CHANNELS, | 
|  | EEPROM_REG_BAND_52_HT40_CHANNELS | 
|  | }, | 
|  | .verify_signature  = iwlcore_eeprom_verify_signature, | 
|  | .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, | 
|  | .release_semaphore = iwlcore_eeprom_release_semaphore, | 
|  | .calib_version	= iwlagn_eeprom_calib_version, | 
|  | .query_addr = iwlagn_eeprom_query_addr, | 
|  | .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, | 
|  | }, | 
|  | .post_associate = iwl_post_associate, | 
|  | .isr = iwl_isr_ict, | 
|  | .config_ap = iwl_config_ap, | 
|  | .temp_ops = { | 
|  | .temperature = iwlagn_temperature, | 
|  | .set_ct_kill = iwl6000_set_ct_threshold, | 
|  | }, | 
|  | .manage_ibss_station = iwlagn_manage_ibss_station, | 
|  | .debugfs_ops = { | 
|  | .rx_stats_read = iwl_ucode_rx_stats_read, | 
|  | .tx_stats_read = iwl_ucode_tx_stats_read, | 
|  | .general_stats_read = iwl_ucode_general_stats_read, | 
|  | }, | 
|  | .recover_from_tx_stall = iwl_bg_monitor_recover, | 
|  | .check_plcp_health = iwl_good_plcp_health, | 
|  | .check_ack_health = iwl_good_ack_health, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_ops iwl6000_ops = { | 
|  | .lib = &iwl6000_lib, | 
|  | .hcmd = &iwlagn_hcmd, | 
|  | .utils = &iwlagn_hcmd_utils, | 
|  | .led = &iwlagn_led_ops, | 
|  | }; | 
|  |  | 
|  | static struct iwl_lib_ops iwl6050_lib = { | 
|  | .set_hw_params = iwl6050_hw_set_hw_params, | 
|  | .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, | 
|  | .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, | 
|  | .txq_set_sched = iwlagn_txq_set_sched, | 
|  | .txq_agg_enable = iwlagn_txq_agg_enable, | 
|  | .txq_agg_disable = iwlagn_txq_agg_disable, | 
|  | .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd, | 
|  | .txq_free_tfd = iwl_hw_txq_free_tfd, | 
|  | .txq_init = iwl_hw_tx_queue_init, | 
|  | .rx_handler_setup = iwlagn_rx_handler_setup, | 
|  | .setup_deferred_work = iwlagn_setup_deferred_work, | 
|  | .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, | 
|  | .load_ucode = iwlagn_load_ucode, | 
|  | .dump_nic_event_log = iwl_dump_nic_event_log, | 
|  | .dump_nic_error_log = iwl_dump_nic_error_log, | 
|  | .dump_csr = iwl_dump_csr, | 
|  | .dump_fh = iwl_dump_fh, | 
|  | .init_alive_start = iwlagn_init_alive_start, | 
|  | .alive_notify = iwlagn_alive_notify, | 
|  | .send_tx_power = iwlagn_send_tx_power, | 
|  | .update_chain_flags = iwl_update_chain_flags, | 
|  | .set_channel_switch = iwl6000_hw_channel_switch, | 
|  | .apm_ops = { | 
|  | .init = iwl_apm_init, | 
|  | .stop = iwl_apm_stop, | 
|  | .config = iwl6000_nic_config, | 
|  | .set_pwr_src = iwl_set_pwr_src, | 
|  | }, | 
|  | .eeprom_ops = { | 
|  | .regulatory_bands = { | 
|  | EEPROM_REG_BAND_1_CHANNELS, | 
|  | EEPROM_REG_BAND_2_CHANNELS, | 
|  | EEPROM_REG_BAND_3_CHANNELS, | 
|  | EEPROM_REG_BAND_4_CHANNELS, | 
|  | EEPROM_REG_BAND_5_CHANNELS, | 
|  | EEPROM_6000_REG_BAND_24_HT40_CHANNELS, | 
|  | EEPROM_REG_BAND_52_HT40_CHANNELS | 
|  | }, | 
|  | .verify_signature  = iwlcore_eeprom_verify_signature, | 
|  | .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, | 
|  | .release_semaphore = iwlcore_eeprom_release_semaphore, | 
|  | .calib_version	= iwlagn_eeprom_calib_version, | 
|  | .query_addr = iwlagn_eeprom_query_addr, | 
|  | .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, | 
|  | }, | 
|  | .post_associate = iwl_post_associate, | 
|  | .isr = iwl_isr_ict, | 
|  | .config_ap = iwl_config_ap, | 
|  | .temp_ops = { | 
|  | .temperature = iwlagn_temperature, | 
|  | .set_ct_kill = iwl6000_set_ct_threshold, | 
|  | .set_calib_version = iwl6050_set_calib_version, | 
|  | }, | 
|  | .manage_ibss_station = iwlagn_manage_ibss_station, | 
|  | .debugfs_ops = { | 
|  | .rx_stats_read = iwl_ucode_rx_stats_read, | 
|  | .tx_stats_read = iwl_ucode_tx_stats_read, | 
|  | .general_stats_read = iwl_ucode_general_stats_read, | 
|  | }, | 
|  | .recover_from_tx_stall = iwl_bg_monitor_recover, | 
|  | .check_plcp_health = iwl_good_plcp_health, | 
|  | .check_ack_health = iwl_good_ack_health, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_ops iwl6050_ops = { | 
|  | .lib = &iwl6050_lib, | 
|  | .hcmd = &iwlagn_hcmd, | 
|  | .utils = &iwlagn_hcmd_utils, | 
|  | .led = &iwlagn_led_ops, | 
|  | }; | 
|  |  | 
|  |  | 
|  | struct iwl_cfg iwl6000g2a_2agn_cfg = { | 
|  | .name = "6000 Series 2x2 AGN Gen2a", | 
|  | .fw_name_pre = IWL6000G2A_FW_PRE, | 
|  | .ucode_api_max = IWL6000G2_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6000G2_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, | 
|  | .ops = &iwl6000_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_AB, | 
|  | .valid_rx_ant = ANT_AB, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_SYSTEM, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .ht_greenfield_support = true, | 
|  | .led_compensation = 51, | 
|  | .use_rts_for_ht = true, /* use rts/cts protection */ | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 512, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * "i": Internal configuration, use internal Power Amplifier | 
|  | */ | 
|  | struct iwl_cfg iwl6000i_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", | 
|  | .fw_name_pre = IWL6000_FW_PRE, | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, | 
|  | .ops = &iwl6000_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_BC, | 
|  | .valid_rx_ant = ANT_BC, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_INTERNAL, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .ht_greenfield_support = true, | 
|  | .led_compensation = 51, | 
|  | .use_rts_for_ht = true, /* use rts/cts protection */ | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl6000i_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", | 
|  | .fw_name_pre = IWL6000_FW_PRE, | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G, | 
|  | .ops = &iwl6000_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_BC, | 
|  | .valid_rx_ant = ANT_BC, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_INTERNAL, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 51, | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl6000i_2bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", | 
|  | .fw_name_pre = IWL6000_FW_PRE, | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_G, | 
|  | .ops = &iwl6000_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_BC, | 
|  | .valid_rx_ant = ANT_BC, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_INTERNAL, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 51, | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl6050_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", | 
|  | .fw_name_pre = IWL6050_FW_PRE, | 
|  | .ucode_api_max = IWL6050_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6050_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, | 
|  | .ops = &iwl6050_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6050_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_AB, | 
|  | .valid_rx_ant = ANT_AB, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_SYSTEM, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x50, | 
|  | .shadow_ram_support = true, | 
|  | .ht_greenfield_support = true, | 
|  | .led_compensation = 51, | 
|  | .use_rts_for_ht = true, /* use rts/cts protection */ | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1500, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl6050_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", | 
|  | .fw_name_pre = IWL6050_FW_PRE, | 
|  | .ucode_api_max = IWL6050_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6050_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G, | 
|  | .ops = &iwl6050_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6050_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_AB, | 
|  | .valid_rx_ant = ANT_AB, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_SYSTEM, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x50, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 51, | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1500, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl6000_3agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN", | 
|  | .fw_name_pre = IWL6000_FW_PRE, | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, | 
|  | .ops = &iwl6000_ops, | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .mod_params = &iwlagn_mod_params, | 
|  | .valid_tx_ant = ANT_ABC, | 
|  | .valid_rx_ant = ANT_ABC, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = false, | 
|  | .pa_type = IWL_PA_SYSTEM, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .ht_greenfield_support = true, | 
|  | .led_compensation = 51, | 
|  | .use_rts_for_ht = true, /* use rts/cts protection */ | 
|  | .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, | 
|  | .supports_idle = true, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .monitor_recover_period = IWL_MONITORING_PERIOD, | 
|  | .max_event_log_size = 1024, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); | 
|  | MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); | 
|  | MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); |