|  | /* | 
|  | * Intel Wireless Multicomm 3200 WiFi driver | 
|  | * | 
|  | * Copyright (C) 2009 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * | 
|  | *   * Redistributions of source code must retain the above copyright | 
|  | *     notice, this list of conditions and the following disclaimer. | 
|  | *   * Redistributions in binary form must reproduce the above copyright | 
|  | *     notice, this list of conditions and the following disclaimer in | 
|  | *     the documentation and/or other materials provided with the | 
|  | *     distribution. | 
|  | *   * Neither the name of Intel Corporation nor the names of its | 
|  | *     contributors may be used to endorse or promote products derived | 
|  | *     from this software without specific prior written permission. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
|  | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | 
|  | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | 
|  | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | * | 
|  | * Intel Corporation <ilw@linux.intel.com> | 
|  | * Samuel Ortiz <samuel.ortiz@intel.com> | 
|  | * Zhu Yi <yi.zhu@intel.com> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/firmware.h> | 
|  |  | 
|  | #include "iwm.h" | 
|  | #include "bus.h" | 
|  | #include "hal.h" | 
|  | #include "umac.h" | 
|  | #include "debug.h" | 
|  | #include "fw.h" | 
|  | #include "commands.h" | 
|  |  | 
|  | static const char fw_barker[] = "*WESTOPFORNOONE*"; | 
|  |  | 
|  | /* | 
|  | * @op_code: Op code we're looking for. | 
|  | * @index: There can be several instances of the same opcode within | 
|  | *         the firmware. Index specifies which one we're looking for. | 
|  | */ | 
|  | static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw, | 
|  | u16 op_code, u32 index) | 
|  | { | 
|  | int offset = -EINVAL, fw_offset; | 
|  | u32 op_index = 0; | 
|  | const u8 *fw_ptr; | 
|  | struct iwm_fw_hdr_rec *rec; | 
|  |  | 
|  | fw_offset = 0; | 
|  | fw_ptr = fw->data; | 
|  |  | 
|  | /* We first need to look for the firmware barker */ | 
|  | if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) { | 
|  | IWM_ERR(iwm, "No barker string in this FW\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (fw->size < IWM_HDR_LEN) { | 
|  | IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | fw_offset += IWM_HDR_BARKER_LEN; | 
|  |  | 
|  | while (fw_offset < fw->size) { | 
|  | rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset); | 
|  |  | 
|  | IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n", | 
|  | rec->op_code, rec->len, fw_offset); | 
|  |  | 
|  | if (rec->op_code == IWM_HDR_REC_OP_INVALID) { | 
|  | IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (rec->op_code == op_code) { | 
|  | if (op_index == index) { | 
|  | fw_offset += sizeof(struct iwm_fw_hdr_rec); | 
|  | offset = fw_offset; | 
|  | goto out; | 
|  | } | 
|  | op_index++; | 
|  | } | 
|  |  | 
|  | fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return offset; | 
|  | } | 
|  |  | 
|  | static int iwm_load_firmware_chunk(struct iwm_priv *iwm, | 
|  | const struct firmware *fw, | 
|  | struct iwm_fw_img_desc *img_desc) | 
|  | { | 
|  | struct iwm_udma_nonwifi_cmd target_cmd; | 
|  | u32 chunk_size; | 
|  | const u8 *chunk_ptr; | 
|  | int ret = 0; | 
|  |  | 
|  | IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n", | 
|  | img_desc->length, img_desc->address); | 
|  |  | 
|  | target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE; | 
|  | target_cmd.handle_by_hw = 1; | 
|  | target_cmd.op2 = 0; | 
|  | target_cmd.resp = 0; | 
|  | target_cmd.eop = 1; | 
|  |  | 
|  | chunk_size = img_desc->length; | 
|  | chunk_ptr = fw->data + img_desc->offset; | 
|  |  | 
|  | while (chunk_size > 0) { | 
|  | u32 tmp_chunk_size; | 
|  |  | 
|  | tmp_chunk_size = min_t(u32, chunk_size, | 
|  | IWM_MAX_NONWIFI_CMD_BUFF_SIZE); | 
|  |  | 
|  | target_cmd.addr = cpu_to_le32(img_desc->address + | 
|  | (chunk_ptr - fw->data - img_desc->offset)); | 
|  | target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size); | 
|  |  | 
|  | IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n", | 
|  | tmp_chunk_size, target_cmd.addr); | 
|  |  | 
|  | ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr); | 
|  | if (ret < 0) { | 
|  | IWM_ERR(iwm, "Couldn't load FW chunk\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | chunk_size -= tmp_chunk_size; | 
|  | chunk_ptr += tmp_chunk_size; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | /* | 
|  | * To load a fw image to the target, we basically go through the | 
|  | * fw, looking for OP_MEM_DESC records. Once we found one, we | 
|  | * pass it to iwm_load_firmware_chunk(). | 
|  | * The OP_MEM_DESC records contain the actuall memory chunk to be | 
|  | * sent, but also the destination address. | 
|  | */ | 
|  | static int iwm_load_img(struct iwm_priv *iwm, const char *img_name) | 
|  | { | 
|  | const struct firmware *fw; | 
|  | struct iwm_fw_img_desc *img_desc; | 
|  | struct iwm_fw_img_ver *ver; | 
|  | int ret = 0, fw_offset; | 
|  | u32 opcode_idx = 0, build_date; | 
|  | char *build_tag; | 
|  |  | 
|  | ret = request_firmware(&fw, img_name, iwm_to_dev(iwm)); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Request firmware failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name); | 
|  |  | 
|  | while (1) { | 
|  | fw_offset = iwm_fw_op_offset(iwm, fw, | 
|  | IWM_HDR_REC_OP_MEM_DESC, | 
|  | opcode_idx); | 
|  | if (fw_offset < 0) | 
|  | break; | 
|  |  | 
|  | img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset); | 
|  | ret = iwm_load_firmware_chunk(iwm, fw, img_desc); | 
|  | if (ret < 0) | 
|  | goto err_release_fw; | 
|  | opcode_idx++; | 
|  | }; | 
|  |  | 
|  | /* Read firmware version */ | 
|  | fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0); | 
|  | if (fw_offset < 0) | 
|  | goto err_release_fw; | 
|  |  | 
|  | ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset); | 
|  |  | 
|  | /* Read build tag */ | 
|  | fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0); | 
|  | if (fw_offset < 0) | 
|  | goto err_release_fw; | 
|  |  | 
|  | build_tag = (char *)(fw->data + fw_offset); | 
|  |  | 
|  | /* Read build date */ | 
|  | fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0); | 
|  | if (fw_offset < 0) | 
|  | goto err_release_fw; | 
|  |  | 
|  | build_date = *(u32 *)(fw->data + fw_offset); | 
|  |  | 
|  | IWM_INFO(iwm, "%s:\n", img_name); | 
|  | IWM_INFO(iwm, "\tVersion:    %02X.%02X\n", ver->major, ver->minor); | 
|  | IWM_INFO(iwm, "\tBuild tag:  %s\n", build_tag); | 
|  | IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n", | 
|  | IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date), | 
|  | IWM_BUILD_DAY(build_date)); | 
|  |  | 
|  | if (!strcmp(img_name, iwm->bus_ops->umac_name)) | 
|  | sprintf(iwm->umac_version, "%02X.%02X", | 
|  | ver->major, ver->minor); | 
|  |  | 
|  | if (!strcmp(img_name, iwm->bus_ops->lmac_name)) | 
|  | sprintf(iwm->lmac_version, "%02X.%02X", | 
|  | ver->major, ver->minor); | 
|  |  | 
|  | err_release_fw: | 
|  | release_firmware(fw); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwm_load_umac(struct iwm_priv *iwm) | 
|  | { | 
|  | struct iwm_udma_nonwifi_cmd target_cmd; | 
|  | int ret; | 
|  |  | 
|  | ret = iwm_load_img(iwm, iwm->bus_ops->umac_name); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* We've loaded the UMAC, we can tell the target to jump there */ | 
|  | target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP; | 
|  | target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR); | 
|  | target_cmd.op1_sz = 0; | 
|  | target_cmd.op2 = 0; | 
|  | target_cmd.handle_by_hw = 0; | 
|  | target_cmd.resp = 1 ; | 
|  | target_cmd.eop = 1; | 
|  |  | 
|  | ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL); | 
|  | if (ret < 0) | 
|  | IWM_ERR(iwm, "Couldn't send JMP command\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwm_load_lmac(struct iwm_priv *iwm, const char *img_name) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = iwm_load_img(iwm, img_name); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return iwm_send_umac_reset(iwm, | 
|  | cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0); | 
|  | } | 
|  |  | 
|  | static int iwm_init_calib(struct iwm_priv *iwm, unsigned long cfg_bitmap, | 
|  | unsigned long expected_bitmap, u8 rx_iq_cmd) | 
|  | { | 
|  | /* Read RX IQ calibration result from EEPROM */ | 
|  | if (test_bit(rx_iq_cmd, &cfg_bitmap)) { | 
|  | iwm_store_rxiq_calib_result(iwm); | 
|  | set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map); | 
|  | } | 
|  |  | 
|  | iwm_send_prio_table(iwm); | 
|  | iwm_send_init_calib_cfg(iwm, cfg_bitmap); | 
|  |  | 
|  | while (iwm->calib_done_map != expected_bitmap) { | 
|  | if (iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION, | 
|  | IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT)) { | 
|  | IWM_DBG_FW(iwm, DBG, "Initial calibration timeout\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: " | 
|  | "0x%lx, expected calibrations: 0x%lx\n", | 
|  | iwm->calib_done_map, expected_bitmap); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We currently have to load 3 FWs: | 
|  | * 1) The UMAC (Upper MAC). | 
|  | * 2) The calibration LMAC (Lower MAC). | 
|  | *    We then send the calibration init command, so that the device can | 
|  | *    run a first calibration round. | 
|  | * 3) The operational LMAC, which replaces the calibration one when it's | 
|  | *    done with the first calibration round. | 
|  | * | 
|  | * Once those 3 FWs have been loaded, we send the periodic calibration | 
|  | * command, and then the device is available for regular 802.11 operations. | 
|  | */ | 
|  | int iwm_load_fw(struct iwm_priv *iwm) | 
|  | { | 
|  | unsigned long init_calib_map, periodic_calib_map; | 
|  | unsigned long expected_calib_map; | 
|  | int ret; | 
|  |  | 
|  | /* We first start downloading the UMAC */ | 
|  | ret = iwm_load_umac(iwm); | 
|  | if (ret < 0) { | 
|  | IWM_ERR(iwm, "UMAC loading failed\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Handle UMAC_ALIVE notification */ | 
|  | ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC, | 
|  | WAIT_NOTIF_TIMEOUT); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* UMAC is alive, we can download the calibration LMAC */ | 
|  | ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Calibration LMAC loading failed\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Handle UMAC_INIT_COMPLETE notification */ | 
|  | ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE, | 
|  | IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration " | 
|  | "LMAC: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Read EEPROM data */ | 
|  | ret = iwm_eeprom_init(iwm); | 
|  | if (ret < 0) { | 
|  | IWM_ERR(iwm, "Couldn't init eeprom array\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | init_calib_map = iwm->conf.calib_map & IWM_CALIB_MAP_INIT_MSK; | 
|  | expected_calib_map = iwm->conf.expected_calib_map & | 
|  | IWM_CALIB_MAP_INIT_MSK; | 
|  | periodic_calib_map = IWM_CALIB_MAP_PER_LMAC(iwm->conf.calib_map); | 
|  |  | 
|  | ret = iwm_init_calib(iwm, init_calib_map, expected_calib_map, | 
|  | CALIB_CFG_RX_IQ_IDX); | 
|  | if (ret < 0) { | 
|  | /* Let's try the old way */ | 
|  | ret = iwm_init_calib(iwm, expected_calib_map, | 
|  | expected_calib_map, | 
|  | PHY_CALIBRATE_RX_IQ_CMD); | 
|  | if (ret < 0) { | 
|  | IWM_ERR(iwm, "Calibration result timeout\n"); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Handle LMAC CALIBRATION_COMPLETE notification */ | 
|  | ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION, | 
|  | IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map); | 
|  |  | 
|  | iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1); | 
|  |  | 
|  | ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC, | 
|  | WAIT_NOTIF_TIMEOUT); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Wait for UMAC RESET timeout\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Download the operational LMAC */ | 
|  | ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "LMAC loading failed\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE, | 
|  | IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT); | 
|  | if (ret) { | 
|  | IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | iwm_send_prio_table(iwm); | 
|  | iwm_send_calib_results(iwm); | 
|  | iwm_send_periodic_calib_cfg(iwm, periodic_calib_map); | 
|  | iwm_send_ct_kill_cfg(iwm, iwm->conf.ct_kill_entry, | 
|  | iwm->conf.ct_kill_exit); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | iwm_eeprom_exit(iwm); | 
|  | return ret; | 
|  | } |