hwmon: Fix checkpatch warning 'quoted string split across lines'
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Roger Lucas <vt8231@hiddenengine.co.uk>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index ea09046..3a6d9ef 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -49,14 +49,14 @@
module_param_array(gpio_input, int, NULL, 0);
MODULE_PARM_DESC(gpio_input, "List of GPIO pins (0-16) to program as inputs");
module_param_array(gpio_output, int, NULL, 0);
-MODULE_PARM_DESC(gpio_output, "List of GPIO pins (0-16) to program as "
- "outputs");
+MODULE_PARM_DESC(gpio_output,
+ "List of GPIO pins (0-16) to program as outputs");
module_param_array(gpio_inverted, int, NULL, 0);
-MODULE_PARM_DESC(gpio_inverted, "List of GPIO pins (0-16) to program as "
- "inverted");
+MODULE_PARM_DESC(gpio_inverted,
+ "List of GPIO pins (0-16) to program as inverted");
module_param_array(gpio_normal, int, NULL, 0);
-MODULE_PARM_DESC(gpio_normal, "List of GPIO pins (0-16) to program as "
- "normal/non-inverted");
+MODULE_PARM_DESC(gpio_normal,
+ "List of GPIO pins (0-16) to program as normal/non-inverted");
module_param_array(gpio_fan, int, NULL, 0);
MODULE_PARM_DESC(gpio_fan, "List of GPIO pins (0-7) to program as fan tachs");
@@ -372,31 +372,31 @@
dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n",
data->config1);
if ((data->config1 & CFG1_MONITOR) == 0) {
- dev_dbg(&client->dev, "Monitoring not currently "
- "enabled.\n");
+ dev_dbg(&client->dev,
+ "Monitoring not currently enabled.\n");
}
if (data->config1 & CFG1_INT_ENABLE) {
- dev_dbg(&client->dev, "SMBALERT interrupts are "
- "enabled.\n");
+ dev_dbg(&client->dev,
+ "SMBALERT interrupts are enabled.\n");
}
if (data->config1 & CFG1_AIN8_9) {
- dev_dbg(&client->dev, "in8 and in9 enabled. "
- "temp3 disabled.\n");
+ dev_dbg(&client->dev,
+ "in8 and in9 enabled. temp3 disabled.\n");
} else {
- dev_dbg(&client->dev, "temp3 enabled. in8 and "
- "in9 disabled.\n");
+ dev_dbg(&client->dev,
+ "temp3 enabled. in8 and in9 disabled.\n");
}
if (data->config1 & CFG1_THERM_HOT) {
- dev_dbg(&client->dev, "Automatic THERM, PWM, "
- "and temp limits enabled.\n");
+ dev_dbg(&client->dev,
+ "Automatic THERM, PWM, and temp limits enabled.\n");
}
if (data->config3 & CFG3_GPIO16_ENABLE) {
- dev_dbg(&client->dev, "GPIO16 enabled. THERM "
- "pin disabled.\n");
+ dev_dbg(&client->dev,
+ "GPIO16 enabled. THERM pin disabled.\n");
} else {
- dev_dbg(&client->dev, "THERM pin enabled. "
- "GPIO16 disabled.\n");
+ dev_dbg(&client->dev,
+ "THERM pin enabled. GPIO16 disabled.\n");
}
if (data->config3 & CFG3_VREF_250)
dev_dbg(&client->dev, "Vref is 2.50 Volts.\n");
@@ -1798,8 +1798,8 @@
company = adm1026_read_value(client, ADM1026_REG_COMPANY);
verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP);
- dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
- " COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+ dev_dbg(&adapter->dev,
+ "Detecting device at %d,0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
i2c_adapter_id(client->adapter), client->addr,
company, verstep);
@@ -1811,11 +1811,12 @@
/* Analog Devices ADM1026 */
} else if (company == ADM1026_COMPANY_ANALOG_DEV
&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Unrecognized stepping "
- "0x%02x. Defaulting to ADM1026.\n", verstep);
+ dev_err(&adapter->dev,
+ "Unrecognized stepping 0x%02x. Defaulting to ADM1026.\n",
+ verstep);
} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Found version/stepping "
- "0x%02x. Assuming generic ADM1026.\n",
+ dev_err(&adapter->dev,
+ "Found version/stepping 0x%02x. Assuming generic ADM1026.\n",
verstep);
} else {
dev_dbg(&adapter->dev, "Autodetection failed\n");