ARM: shmobile: sh73a0: Support sparse GPIO numbers
The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 8ff53a1..a4ac46a 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -304,9 +304,9 @@
if (brightness == 0) {
/* Reset the chip */
- gpio_set_value(GPIO_PORT235, 0);
+ gpio_set_value(235, 0);
mdelay(24);
- gpio_set_value(GPIO_PORT235, 1);
+ gpio_set_value(235, 1);
return 0;
}
@@ -406,7 +406,7 @@
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT251,
+ .cd_gpio = 251,
};
static struct resource sdhi0_resources[] = {
@@ -461,7 +461,7 @@
static struct fixed_voltage_config cn4_power_info = {
.supply_name = "CN4 SD/MMC Vdd",
.microvolts = 3300000,
- .gpio = GPIO_PORT114,
+ .gpio = 114,
.enable_high = 1,
.init_data = &cn4_power_init_data,
};
@@ -479,10 +479,10 @@
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
- int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+ int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
"sdhi1_power");
if (!ret)
- power_gpio = GPIO_PORT114;
+ power_gpio = 114;
}
/*
@@ -493,7 +493,7 @@
* regulator driver. We have to live with the race in case the driver
* gets unloaded and the GPIO freed between these two steps.
*/
- gpio_set_value(GPIO_PORT114, state);
+ gpio_set_value(114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
@@ -603,11 +603,11 @@
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
@@ -622,13 +622,13 @@
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
/* LCD panel */
- gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
- gpio_set_value(GPIO_PORT217, 1);
+ gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
- gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 2ccc860..b6f0515 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -135,17 +135,17 @@
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
- GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
- GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
- GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
- GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
- GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
- GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
- GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
- /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
- GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
- /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+ GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
+ GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
+ GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
+ GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
+ GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
+ GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
+ GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
+ GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
+ /* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
+ GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
+ /* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
};
static struct gpio_keys_platform_data gpio_key_info = {
@@ -165,9 +165,9 @@
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
- GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
- GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+ GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
+ GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
+ GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
};
static struct gpio_led_platform_data gpio_leds_info = {
@@ -187,7 +187,7 @@
static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
.name = "V2513",
.pin_gpio_fn = GPIO_FN_TPU1TO2,
- .pin_gpio = GPIO_PORT153,
+ .pin_gpio = 153,
.channel_offset = 0x90,
.timer_bit = 2,
.max_brightness = 1000,
@@ -215,7 +215,7 @@
static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
.name = "V2514",
.pin_gpio_fn = GPIO_FN_TPU4TO1,
- .pin_gpio = GPIO_PORT199,
+ .pin_gpio = 199,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -243,7 +243,7 @@
static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
.name = "V2515",
.pin_gpio_fn = GPIO_FN_TPU2TO1,
- .pin_gpio = GPIO_PORT197,
+ .pin_gpio = 197,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -271,7 +271,7 @@
static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
.name = "KEYLED",
.pin_gpio_fn = GPIO_FN_TPU3TO0,
- .pin_gpio = GPIO_PORT163,
+ .pin_gpio = 163,
.channel_offset = 0x10,
.timer_bit = 0,
.max_brightness = 1000,
@@ -474,8 +474,8 @@
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_CS5A_, NULL);
gpio_request(GPIO_FN_WE0__FWE, NULL);
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -507,7 +507,7 @@
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* SDHI0 (microSD) */
gpio_request(GPIO_FN_SDHICD0_PU, NULL);
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 7f3a6b7..65a5e0b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -433,7 +433,7 @@
TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT13,
+ .cd_gpio = 13,
};
static struct resource sdhi2_resources[] = {
@@ -672,7 +672,7 @@
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
/* SMSC */
- gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
+ gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
@@ -702,11 +702,11 @@
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
- gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
+ gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+ gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
/* Touchscreen */
- gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
+ gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
@@ -730,7 +730,7 @@
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
- gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
+ gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* enable Micro SD */
gpio_request(GPIO_FN_SDHID2_0, NULL);
@@ -739,7 +739,7 @@
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
- gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
+ gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 606d31d..4dca135 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -94,7 +94,7 @@
GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
/* Table 25-1 (Function 0-7) */
- GPIO_FN_VBUS_0,
+ GPIO_FN_VBUS_0 = 310,
GPIO_FN_GPI0,
GPIO_FN_GPI1,
GPIO_FN_GPI2,